Enhanced performance of p-type dye-sensitized solar cells based on ultrasmall Mg-doped CuCrO2 nanocrystals

Magnesium: properties and rich chemistry for new material synthesis and energy applications

Magnesium (Mg) has many unique properties suitable for applications in the fields of energy conversion and storage. These fields presently rely on noble metals for efficient performance. However, among other challenges, noble metals have low natural abundance, which undermines their sustainability. Mg has a high negative standard reduction potential and a unique crystal structure, and its low melting point at 650 °C makes it a good candidate to replace or supplement numerous other metals in various energy applications. These attractive features are particularly helpful for improving the properties and limits of materials in energy systems. However, knowledge of Mg and its practical uses is still limited, despite recent studies which have reported Mg's key roles in synthesizing new structures and modifying the chemical properties of materials. At present, information about Mg chemistry has been rather scattered without any organized report. The present review highlights the chemistry of Mg and its uses in energy applications such as electrocatalysis, photocatalysis, and secondary batteries, among others. Future perspectives on the development of Mg-based materials are further discussed to identify the challenges that need to be addressed.

Push-Pull Phenoxazine-Based Sensitizers for p-Type DSSCs: Effect of Acceptor Units on Photovoltaic Performance

Finding new efficient p-type sensitizers for NiO photocathodes is a great challenge for the development of promising low-cost tandem dye-sensitized solar cells (DSSCs). Now, the focus of researchers investigating these cells has been to create high-performance p-type systems. With this intention, herein, the design and synthesis of six new phenoxazine-based donor-acceptor (D-A)-configured organic dyes PO_1-6 was reported, comprising different acceptor moieties specially designed for the sensitization of mesoporous p-type semiconductor NiO for the construction of p-type DSSCs (p-DSSCs). This work includes structural, photophysical, thermal, electrochemical, theoretical, and photoelectrochemical studies of these dyes, including evaluation of their structure-property relationships. The optical studies revealed that PO_1-6 displayed adequate absorption and emission features in the range of 480-550 and 560-650 nm, respectively, with a bandgap in the order of 2.05-2.40 eV, and their thermodynamic parameters favored an efficient interfacial charge transfer involving NiO. Among the six new dyes, the device based on sensitizer PO₂ carrying electron-withdrawing 1,3-diethyl-2-thiobarbituric acid achieved the highest power conversion efficiency of 0.031 % (short-circuit current density=0.89 mA cm^-2 , open-circuit voltage=101 mV, and fill factor=35 %). Conclusively, the study furnishes an understanding of the intricacies involved in the structural modification of phenoxazine-based sensitizers to further ameliorate the performance of the p-type DSSCs.

Self-Powered Photodetector Based on FTO/n-TiO2/p-CuMnO2 Transparent Thin Films

A self-powered photodetector with the FTO/n-TiO2/p-CuMnO2 configuration, representing the novelty of the work, was successfully achieved for the first time and presumes two steps: deposition of the n-type semiconductor (TiO2) by the doctor blade method and of the p-type semiconductor (CuMnO2) by the spin coating technique, respectively. Investigation techniques of the structural and morphological characteristics of the as-synthesized heterostructures, such as XRD, UV-VIS analysis, and SEM/EDX and AFM morphologies, were used. The I-t measurements of the photodetector showed that the responsivity in the self-powered mode was 2.84 × 107 A W−1 cm2 and in the 1 V bias mode it was 1.82 × 106 A W−1 cm2. Additionally, a self-powered current of 14.2 nA was generated under UV illumination with an intensity of 0.1 mW/cm2. Furthermore, under illumination conditions, the response time (tres) and the recovery time (trec) of the sensor exhibited a good response; thus, tres = 7.30 s and trec = 0.4 s for the self-powered mode, and in the 1 V bias mode, these were tres = 15.16 s and trec = 2.18 s. The above results show that the transparent heterojunction device of n-TiO2/p-CuMnO2 exhibited a self-powered ultraviolet photodetector with high sensitivity.

Hydrothermal synthesized delafossite CuGaO2 as an electrocatalyst for water oxidation

Hydrogen production from water splitting provides an effective method to alleviate the ever-growing global energy crisis. In this work, delafossite CuGaO₂ (CGO) crystal was synthesized through hydrothermal routes with Cu(NO₃)₂·3H₂O and Ga(NO₃)₃·xH₂O used as reactants. The addition of cetyltrimethylammonium bromide (CTAB) was found to play an important role in modifying the morphology of CuGaO₂ (CGO-CTAB). With the addition of CTAB, the morphology of CGO-CTAB samples changed from irregular flake to typical hexagonal sheet microstructure, with an average size of 1-2 μm and a thickness of around 100 nm. Furthermore, the electrocatalytic activity of CGO-CTAB crystals for oxygen evolution reaction (OER) was also studied and compared with that of CGO crystals. CGO-CTAB samples exhibited better activity than CGO. An overpotential of 391.5 mV was shown to be able to generate a current density of 10 mA/cm². The as-prepared samples also demonstrate good stability for water oxidation and relatively fast OER kinetics with a Tafel slope of 56.4 mV/dec. This work highlights the significant role of modification of CTAB surfactants in preparing CGO related crystals, and the introduction of CTAB was found to help to improve their electrocatalytic activity for OER.

Metal-organic framework derived bimetal oxide CuCoO2 as efficient electrocatalyst for the oxygen evolution reaction

Metal-organic framework (MOF) materials with tunable porous morphology, controlled crystalline structure, various compositions, and high specific surface area are widely used as precursors to synthesize electrocatalysts for water splitting, which is beneficial for improving their oxygen evolution reaction (OER) performance. Using ZIF-67 as a Co source and Cu-BTC as a Cu source, hexagonal MOF-derived CuCoO₂ (MOF-CCO) nanocrystals with the size of ∼288 nm were prepared through a one-step solvothermal method. The influence of the content of the precursor solvents (absolute ethanol and deionized water), reaction temperature, mass ratio of reactants, NaOH addition, and reactant concentration of precursors on the structure and morphology of the products was investigated. The optimal CuCoO₂ nanocrystals (MOF-CCO1) around 288 nm present the highest OER activity, such as a low overpotential of 364.7 mV at 10 mA cm^-2, a small Tafel slope of 64.1 mV dec^-1, and attractive durability in 1.0 M KOH solution. The XPS results showed that the higher catalytic efficiency of MOF-CCO1 nanocrystals could be due to the oxygen vacancies caused by lattice oxygen loss, the increase of OH^- content on the surface, and the synergistic effect of Cu²⁺/Cu⁺ and Co²⁺/Co³⁺ redox pairs. Finally, a possible OER mechanism for MOF-CCO nanocrystals of water splitting was proposed. This study provides a new approach for the preparation of delafossite nanomaterials and for the improvement of their OER performances.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Hydrothermal synthesis of delafossite CuScO2 hexagonal plates as an electrocatalyst for the alkaline oxygen evolution reaction

In recent years, substantial efforts have been devoted to investigating the electrocatalytic activity of transition metal oxide catalysts, especially delafossite oxides have been proved to exhibit remarkable activity toward the oxygen evolution reaction (OER). Herein, the electrocatalytic activity and stability of CuScO₂ hexagonal plates (around 3-4 μm) for the OER in alkaline solution were investigated. The micron sized CuScO₂ with well-defined hexagonal plate morphology was prepared through a facile hydrothermal method. Moreover, its crystal structure, morphology, surface chemical states, thermal stability, and electrocatalytic performance were studied. The CuScO₂ powder exhibits efficient catalytic activity and good long-term stability towards the OER in 1.0 M KOH. An optimal electrode of Ni foam supported CuScO₂ powders needs an overpotential of 490 mV to afford a benchmark current density of 10 mA cm^-2 and is able to sustain galvanostatic OER electrolysis for 18 hours with little degradation of 33 mV.

Investigation of the structural, optical and electrical properties of Ca2+ doped CuCoO2 nanosheets

In this work, we present the hydrothermal synthesis of delafossite oxide Ca-doped CuCoO2 (CCCaO) nanosheets at a low temperature of 100 °C. The crystal phase, morphology and chemical composition of these CuCoO2 (CCO) based samples were comprehensively characterized by powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The size of CCCaO nanosheets decreased with increasing Ca dopant concentration, and the optimized CCCaO nanosheets (∼490 nm in lateral size and ∼15 nm in thickness) were much smaller than CCO nanocrystals (∼540 nm in lateral size and 85 nm in thickness). The specific surface area of these CCO based samples increased with increasing Ca content, and the optimized CCCaO nanosheets present a high BET surface area of 28 m2 g-1. XPS and Raman spectroscopy analyses indicate Ca2+ dopant substitution on the Cu+ site in CCCaO nanosheets. Moreover, the effects of Ca2+ doping on the optical and electrical properties of these CCO based samples were further studied. The optical properties measured at room temperature show high absorbability (up to 90%) in the ultraviolet-visible-near infrared (UV-VIS-NIR) region, and the indirect band gap shows a significant blue-shift with increasing Ca2+ concentration. The CCO nanocrystals possess a higher electrical conductivity than the CCCaO nanosheets, and present good conductivities of around 12.81, 4.47 and 0.69 s m-1 for the CCO and CCCaO samples at room temperature. The facile fabrication process, tunable crystallite sizes, and excellent optical absorption and electrical properties of these CCO based nanomaterials are encouraging for the development of future applications in photoelectric devices.

Mg Doped CuCrO2 as Efficient Hole Transport Layers for Organic and Perovskite Solar Cells

The electrical and optical properties of the hole transport layer (HTL) are critical for organic and halide perovskite solar cell (OSC and PSC, respectively) performance. In this work, we studied the effect of Mg doping on CuCrO2 (CCO) nanoparticles and their performance as HTLs in OSCs and PSCs. CCO and Mg doped CCO (Mg:CCO) nanoparticles were hydrothermally synthesized. The nanoparticles were characterized by various experimental techniques to study the effect of Mg doping on structural, chemical, morphological, optical, and electronic properties of CCO. We found that Mg doping increases work function and decreases particle size. We demonstrate CCO and Mg:CCO as efficient HTLs in a variety of OSCs, including the first demonstration of a non-fullerene acceptor bulk heterojunction, and CH3NH3PbI3 PSCs. A small improvement of average short-circuit current density with Mg doping was found in all systems.

Ab initio Study of Anchoring Groups for CuGaO2 Delafossite-Based p-Type Dye Sensitized Solar Cells

Here we report the first theoretical characterization of the interface between the CuGaO₂ delafossite oxide and the carboxylic (–COOH) and phosphonic acid (–PO₃H₂) anchoring groups. The promising use of delafossites as effective alternative to nickel oxide in p-type DSSC is still limited by practical difficulties in sensitizing the delafossite surface. Thus, this work provides atomistic insights on the structure and energetics of all the possible interactions between the anchoring functional groups and the CuGaO₂ surface species, including the effects of the Mg doping and of the solvent medium. Our results highlight the presence of a strong selectivity toward the monodentate binding mode on surface Ga atoms for both the carboxylic and phosphonic acid groups. Since the binding modes have a strong influence on the hole injection thermodynamics, these findings have direct implications for further development of delafossite based p-type DSSCs.

Oxygen Vacancy Defects Boosted High Performance p-Type Delafossite CuCrO2 Gas Sensors

p-type ternary oxides can be extensively explored as alternative sensing channels to binary oxides with diverse structural and compositional versatilities. Seeking a novel approach to magnify their sensitivities toward gas molecules, e.g., volatile organic compounds (VOCs), will definitely expand their applications in the frontier area of healthcare and air-quality monitoring. In this work, delafossite CuCrO₂ (CCO) nanoparticles with different grain sizes have been utilized as p-type ternary oxide sensors. It was found that singly ionized oxygen vacancies (V_o^•) defects, compared with the grain size of CCO nanoparticles, play an important role in enhancing the charge exchange at the VOCs molecules/CCO interface. In addition to suppressing the hole concentration of the sensor channel, the unpaired electron trapped in V_o^• provides an active site for chemisorptions of environmental oxygen and VOCs molecules. The synergetic effect is responsible for the observed increase of sensitivity. Furthermore, the sensitive (V_o^• defect-rich) CCO sensor exhibits good reproducibility and stability under a moderate operation temperature (<325 °C). Our work highlights that V_o^• defects, created via either in situ synthesis or postannealing treatment, could be explored to rationally boost the performance of p-type ternary oxide sensors.

Solar H2 generation in water with a CuCrO2 photocathode modified with an organic dye and molecular Ni catalyst

Dye-sensitised photoelectrochemical (DSPEC) cells have emerged in recent years as a route to solar fuel production. However, fuel-forming photocathodes are presently limited by photo-corrodible narrow band gap semiconductors or the small range of available wide bandgap p-type semiconductors such as NiO that display low performance with dyes. Here, we introduce CuCrO2 as a suitable p-type semiconductor for visible light-driven H2 generation upon co-immobilisation of a phosphonated diketopyrrolopyrrole dye with a Ni-bis(diphosphine) catalyst. The hybrid CuCrO2 photocathode displays an early photocurrent onset potential of +0.75 V vs. RHE and delivers a photocurrent of 15 μA cm-2 at 0.0 V vs. RHE in pH 3 aqueous electrolyte solution under UV-filtered simulated solar irradiation. Controlled potential photoelectrolysis at 0.0 V vs. RHE shows good stability and yields a Ni catalyst-based turnover number of 126 ± 13 towards H2 after 2 h. This precious metal-free system outperforms an analogous NiO|dye/catalyst assembly and therefore highlights the benefits of using CuCrO2 as a novel material for DSPEC applications.

A low temperature hydrothermal synthesis of delafossite CuCoO2 as an efficient electrocatalyst for the oxygen evolution reaction in alkaline solutions

CuCoO₂ crystals were prepared at 100 °C through a hydrothermal method and used for the oxygen evolution reaction in alkaline solution.

p-Type CuCrO2 particulate films as the hole transporting layer for CH3NH3PbI3 perovskite solar cells

CuCrO₂ with a crystal structure of delafossite is a promising material as a transparent conducting oxide.

Low temperature hydrothermal synthesis mechanism and thermal stability of p-type CuMnO2 nanocrystals

We first report an oxidation–reduction reaction mechanism for the hydrothermal synthesis of CuMnO₂ nanocrystals at the low temperature of 80 °C.

Ni Mg Mixed Metal Oxides for p-Type Dye-Sensitized Solar Cells

Mg Ni mixed metal oxide photocathodes have been prepared by a mixed NiCl2/MgCl2 sol-gel process. The MgO/NiO electrodes have been extensively characterized using physical and electrochemical methods. Dye-sensitized solar cells have been prepared from these films, and the higher concentrations of MgO improved the photovoltage of these devices; however, there was a notable drop in photocurrent with increasing Mg(2+). Charge extraction and XPS experiments revealed that the cause of this was a positive shift in the energy of the valence band, which decreased the driving force for electron transfer from the NiO film to the dye and, therefore, the photocurrent. In addition, increasing concentrations of MgO increases the volume of pores between 0.500 and 0.050 μm, while reducing pore volumes in the mesopore range (less than 0.050 μm) and lowering BET surface area from approximately 41 down to 30 m(2) g(-1). A MgO concentration of 5% was found to strike a balance between the increased photovoltage and decreased photocurrent, possessing a BET surface area of 35 m(2) g(-1) and a large pore volume in both the meso- and macropore range, which lead to a higher overall power conversion efficiency than NiO alone.

Delafossite Nanoparticle as New Functional Materials: Advances in Energy, Nanomedicine and Environmental Applications

Recently, numerous delafossite oxides in nanoscale have been reported for diverse applications. The present review summarized the recent overall views of delafossite nanoparticles in diverse applications such as energy, catalysis, photocatalysis, nanomedicine, sensors, electrochemical devices and environmental concerns. Delafossite nanoparticles possess unique features such as different and wide chemical composition, large surface area, small energy gap, ability for further functionalization, possess dual-active sites with different oxidation states (A+and M3+), and eager for doping with various species with feasibility to undergo structure modification. Thus, they provided promising application such as solar cell, photocatalysis, hydrogen production, bioactive materials, separation purposes and others. Pros, cons, current and future status were also reviewed.

Hydrothermal synthesis of delafossite CuFeO2 crystals at 100 °C

We report the CuFeO₂ crystals with submicron-sized could be prepared through hydrothermal reaction at 100 °C for the first time.

Boosting the photocurrent density of p-type solar cells based on organometal halide perovskite-sensitized mesoporous NiO photocathodes

The p-n tandem design of a sensitized solar cell is a novel concept holding the potential to overcome the efficiency limitation of conventional single-junction sensitized solar cells. Significant improvement of the photocurrent density (Jsc) of the p-type half-cell is a prerequisite for the realization of a highly efficient p-n tandem cell in the future. This study has demonstrated effective photocathodes based on novel organometal halide perovskite-sensitized mesoporous NiO in liquid-electrolyte-based p-type solar cells. An acceptably high Jsc up to 9.47 mA cm(-2) and efficiency up to 0.71% have been achieved on the basis of the CH3NH3PbI3/NiO solar cell at 100 mW cm(-2) light intensity, which are significantly higher than those of any previously reported liquid-electrolyte-based p-type solar cells based on sensitizers of organic dyes or inorganic quantum dots. The dense blocking layer made by spray pyrolysis of nickel acetylacetonate holds the key to determining the current flow direction of the solar cells. High hole injection efficiency at the perovskite/NiO interface and high hole collection efficiency through the mesoporous NiO network have been proved by time-resolved photoluminescence and transient photocurrent/photovoltage decay measurements. The limitation of these p-type solar cells primarily rests with the adverse light absorption by the NiO mesoporous film; the secondary limitation arises from the highly viscous ethyl acetate-based electrolyte, which is helpful for the solar cell stability but hinders fluent diffusion into the pore channels, giving rise to a nonlinear dependence of Jsc on the light intensity.

Enhanced performance of p-type dye sensitized solar cells based on mesoporous Ni1−xMgxO ternary oxide films

Mesoporous Ni_1−xMg_xO ternary oxides are used as highly efficient photocathodes in p type dye-sensitized solar cells.