Photocatalytic hydrogen production using models of the iron-iron hydrogenase active site dispersed in micellar solution

Rational design and performance prediction of organic photosensitizer based on TATA+ dye for hydrogen production by photocatalytic decomposition of water

In comparison to metal complexes, organic photosensitive dyes employed in photocatalytic hydrogen production exhibit promising developmental prospects. Utilizing the organic dye molecule TA+0 as the foundational structure, a series of innovative organic dyes, denoted as TA1-1 to TA2-6, were systematically designed. Employing first-principles calculations, we methodically explored the modifying effects of diverse electron-donating groups on the R1 and R2 positions to assess their application potential. Our findings reveal that, relative to the experimentally synthesized TATA+03, the TA2-6 molecule boasts a spatial structure conducive to intramolecular electron transfer, showcasing the most negative reduction potential (Ered = -2.11 eV) and the maximum reaction driving force (△G0 2 = -1.26 eV). This configuration enhances its compatibility with the reduction catalyst, thereby facilitating efficient hydrogen evolution. The TA2-6 dye demonstrates outstanding photophysical properties and a robust solar energy capture capacity. Its maximum molar extinction coefficient (ε) stands at 2.616 × 104 M-1·cm-1, representing a remarkable 292.8% improvement over TATA+03. In conclusion, this research underscores the promising potential of the TA2-6 dye as an innovative organic photosensitizer, positioning it as an efficacious component in homogeneous photocatalytic systems.

Mechanistic Insights into the Charge Transfer Dynamics of Photocatalytic Water Oxidation at the Lipid Bilayer-Water Interface

Photosystem II, the natural water-oxidizing system, is a large protein complex embedded in a phospholipid membrane. A much simpler system for photocatalytic water oxidation consists of liposomes functionalized with amphiphilic ruthenium(II)-tris-bipyridine photosensitizer (PS) and 6,6'-dicarboxylato-2,2'-bipyridine-ruthenium(II) catalysts (Cat) with a water-soluble sacrificial electron acceptor (Na₂S₂O₈). However, the effect of embedding this photocatalytic system in liposome membranes on the mechanism of photocatalytic water oxidation was not well understood. Here, several phenomena have been identified by spectroscopic tools, which explain the drastically different kinetics of water photo-oxidizing liposomes, compared with analogous homogeneous systems. First, the oxidative quenching of photoexcited PS* by S₂O₈^2- at the liposome surface occurs solely via static quenching, while dynamic quenching is observed for the homogeneous system. Moreover, the charge separation efficiency after the quenching reaction is much smaller than unity, in contrast to the quantitative generation of PS⁺ in homogeneous solution. In parallel, the high local concentration of the membrane-bound PS induces self-quenching at 10:1-40:1 molar lipid-PS ratios. Finally, while the hole transfer from PS⁺ to catalyst is rather fast in homogeneous solution (k_obs > 1 × 10⁴ s^-1 at [catalyst] > 50 μM), in liposomes at pH = 4, the reaction is rather slow (k_obs ≈ 17 s^-1 for 5 μM catalyst in 100 μM DMPC lipid). Overall, the better understanding of these productive and unproductive pathways explains what limits the rate of photocatalytic water oxidation in liposomal vs homogeneous systems, which is required for future optimization of light-driven catalysis within self-assembled lipid interfaces.

Influence of QD photosensitizers in the photocatalytic production of hydrogen with biomimetic [FeFe]-hydrogenase. Comparative performance of CdSe and CdTe

Photocatalytic systems comprising a hydrogenase-type catalyst and CdX (X = S, Se, Te) chalcogenide quantum dot (QD) photosensitizers show extraordinary hydrogen production rates under visible light excitation. What remains unknown is the mechanism of energy conversion in these systems. Here, we have explored this question by comparing the performance of two QD sensitizers, CdSe and CdTe, in photocatalytic systems featuring aqueous suspensions of a [Fe₂ (μ-1,2-benzenedithiolate) CO₆] catalyst and an ascorbic acid sacrificial agent. Overall, the hydrogen production yield for CdSe-sensitized reactions QDs was found to be 13 times greater than that of CdTe counterparts. According to emission quenching experiments, an enhanced performance of CdSe sensitizers reflected a greater rate of electron transfer from the ascorbic acid (k_Asc). The observed difference in the QD-ascorbic acid charge transfer rates between the two QD materials was consistent with respective driving forces for these systems.

Radiative analysis of luminescence in photoreactive systems: Application to photosensitizers for solar fuel production

Most chemical reactions promoted by light and using a photosensitizer (a dye) are subject to the phenomenon of luminescence. Redistribution of light in all directions (isotropic luminescence emission) and in a new spectral range (luminescence emission spectrum) makes experimental and theoretical studies much more complex compared to a situation with a purely absorbing reaction volume. This has a significant impact on the engineering of photoreactors for industrial applications. Future developments associated with photoreactive system optimization are therefore extremely challenging, and require an in-depth description and quantitative analysis of luminescence. In this study, a radiative model describing the effect of luminescence radiation on the calculation of absorptance is presented and analyzed with the multiple inelastic-scattering approach, using Monte Carlo simulations. The formalism of successive orders of scattering expansion is used as a sophisticated analysis tool which provides, when combined with relevant physical approximations, convenient analytical approximate solutions. Its application to four photosensitizers that are representative of renewable hydrogen production via artificial photosynthesis indicates that luminescence has a significant impact on absorptance and on overall quantum yield estimation, with the contribution of multiple scattering and important spectral effects due to inelastic scattering. We show that luminescence cannot be totally neglected in that case, since photon absorption lies at the root of the chemical reaction. We propose two coupled simple and appropriate analytical approximations enabling the estimation of absorptance with a relative error below 6% in every tested situation: the zero-order scattering approximation and the gray single-scattering approximation. Finally, this theoretical approach is used to determine and discuss the overall quantum yield of a bio-inspired photoreactive system with Eosin Y as a photosensitizer, implemented in an experimental setup comprising a photoreactor dedicated to hydrogen production.

[FeFe]-Hydrogenases: maturation and reactivity of enzymatic systems and overview of biomimetic models

[FeFe]-hydrogenases recieved increasing interest in the last decades. This review summarises important findings regarding their enzymatic reactivity as well as inorganic models applied as electro- and photochemical catalysts.

Supramolecular strategies in artificial photosynthesis

Artificial photosynthesis is a major scientific endeavor aimed at converting solar power into a chemical fuel as a viable approach to sustainable energy production and storage. Photosynthesis requires three fundamental actions performed in order; light harvesting, charge-separation and redox catalysis. These actions span different timescales and require the integration of functional architectures developed in different fields of study. The development of artificial photosynthetic devices is therefore inherently complex and requires an interdisciplinary approach. Supramolecular chemistry has evolved to a mature scientific field in which programmed molecular components form larger functional structures by self-assembly processes. Supramolecular chemistry could provide important tools in preparing, integrating and optimizing artificial photosynthetic devices as it allows precise control over molecular components within such a device. This is illustrated in this perspective by discussing state-of-the-art devices and the current limiting factors - such as recombination and low stability of reactive intermediates - and providing exemplary supramolecular approaches to alleviate some of those problems. Inspiring supramolecular solutions such as those discussed herein will incite expansion of the supramolecular toolbox, which eventually may be needed for the development of applied artificial photosynthesis.

Unraveling the mechanism of biomimetic hydrogen fuel production – a first principles molecular dynamics study

The Fe₂(bdt)(CO)₆ [bdt = benzenedithiolato] complex, a synthetic mimic of the [FeFe] hydrogenase enzyme can electrochemically convert protons into molecular hydrogen. The free energy landscape reveals a different mechanism for the biomimetic cycle.

A DFT study of structure and electrochemical properties of diiron-hydrogenase models with benzenedithiolato and benzenediselenato ligands

The chalcogen atom substitution in the Fe₂(bdt)(CO)₆ complex results in higher and lower proton affinities of iron and chalcogen atoms, respectively.

Photocatalytic Hydrogen Generation by Vesicle-Embedded [FeFe]Hydrogenase Mimics: A Mechanistic Study

Artificial photosynthesis—the direct photochemical generation of hydrogen from water—is a promising but scientifically challenging future technology. Because nature employs membranes for photodriven reactions, the aim of this work is to elucidate the effect of membranes on artificial photocatalysis. To do so, a combination of electrochemistry, photocatalysis, and time‐resolved spectroscopy on vesicle‐embedded [FeFe]hydrogenase mimics, driven by a ruthenium tris‐2,2′‐bipyridine photosensitizer, is reported. The membrane effects encountered can be summarized as follows: the presence of vesicles steers the reactivity of the [FeFe]‐benzodithiolate catalyst towards disproportionation, instead of protonation, due to membrane characteristics, such as providing a constant local effective pH, and concentrating and organizing species inside the membrane. The maximum turnover number is limited by photodegradation of the resting state in the catalytic cycle. Understanding these fundamental productive and destructive pathways in complex photochemical systems allows progress towards the development of efficient artificial leaves.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Iron sulfur clusters in protein nanocages for photocatalytic hydrogen generation in acidic aqueous solutions

We took advantage of the iron binding affinity of apoferritin to immobilize iron-sulfur clusters into apoferritin up to 312 moieties per protein, with a loading rate as high as 25 wt%. The photocatalytic hydrogen generation activity in acidic aqueous solutions was achieved with TONs up to 31 (based on a single catalyst moiety) or 8.3 × 103 (based on a single protein) upon 3 h of visible light irradiation. The present study provides a versatile strategy to construct uniform protein/photocatalyst supramolecular systems with FeFe-H2ase activity.

From protein engineering to artificial enzymes - biological and biomimetic approaches towards sustainable hydrogen production

Hydrogen gas is used extensively in industry today and is often put forward as a suitable energy carrier due its high energy density. Currently, the main source of molecular hydrogen is fossil fuels via steam reforming. Consequently, novel production methods are required to improve the sustainability of hydrogen gas for industrial processes, as well as paving the way for its implementation as a future solar fuel. Nature has already developed an elaborate hydrogen economy, where the production and consumption of hydrogen gas is catalysed by hydrogenase enzymes. In this review we summarize efforts on engineering and optimizing these enzymes for biological hydrogen gas production, with an emphasis on their inorganic cofactors. Moreover, we will describe how our understanding of these enzymes has been applied for the preparation of bio-inspired/-mimetic systems for efficient and sustainable hydrogen production.

Catalyst accessibility to chemical reductants in metal-organic frameworks

This study of catalyst accessibility inside metal–organic frameworks demonstrates that pore dimensions, catalyst loadings, concentration of reductant, and reaction times all influence the proportion of catalysts within MOFs that engage in redox chemistry.

A molecular H₂-evolving catalyst, [Fe₂(cbdt)(CO)₆] ([FeFe], cbdt = 3-carboxybenzene-1,2-dithiolate), has been attached covalently to an amino-functionalized MIL-101(Cr) through an amide bond. Chemical reduction experiments reveal that the MOF channels can be clogged by ion pairs that are formed between the oxidized reductant and the reduced catalyst. This effect is lessened in MIL-101-NH-[FeFe] with lower [FeFe] loadings. On longer timescales, it is shown that large proportions of the [FeFe] catalysts within the MOF engage in photochemical hydrogen production and the amount of produced hydrogen is proportional to the catalyst loading.

Iron Polypyridyl Complexes for Photocatalytic Hydrogen Generation

A series of Fe(III) complexes were recently reported that are stable and active electrocatalysts for reducing protons into hydrogen gas. Herein, we report the incorporation of these electrocatalysts into a photocatalytic system for hydrogen production. Hydrogen evolution is observed when these catalysts are paired with fluorescein (chromophore) and triethylamine (sacrificial electron source) in a 1:1 ethanol:water mixture. The photocatalytic system is highly active and stable, achieving TONs > 2100 (with respect to catalyst) after 24 h. Catalysis proceeds through a reductive quenching pathway with a quantum yield of over 3%.

Mechanistic studies of the photo-electrochemical hydrogen evolution reaction on poly(2,2′-bithiophene)

The realisation of poly(2,2′-bithiophene) (PBTh) as an effective photo-electrocatalyst for the hydrogen evolution reaction is a novel discovery [Ng et al., Int. J. Hydrogen Energy, 2014, 39, 18230]; however, the underlying mechanism for this catalysis remains unknown.

Electrochemistry of Simple Organometallic Models of Iron-Iron Hydrogenases in Organic Solvent and Water

Synthetic models of the active site of iron-iron hydrogenases are currently the subjects of numerous studies aimed at developing H2-production catalysts based on cheap and abundant materials. In this context, the present report offers an electrochemist's view of the catalysis of proton reduction by simple binuclear iron(I) thiolate complexes. Although these complexes probably do not follow a biocatalytic pathway, we analyze and discuss the interplay between the reduction potential and basicity and how these antagonist properties impact the mechanisms of proton-coupled electron transfer to the metal centers. This question is central to any consideration of the activity at the molecular level of hydrogenases and related enzymes. In a second part, special attention is paid to iron thiolate complexes holding rigid and unsaturated bridging ligands. The complexes that enjoy mild reduction potentials and stabilized reduced forms are promising iron-based catalysts for the photodriven evolution of H2 in organic solvents and, more importantly, in water.

A computational mechanistic investigation of hydrogen production in water using the [RhIII(dmbpy)2Cl2]+/[RuII(bpy)3]2+/ascorbic acid photocatalytic system

The involvement of the Rh^III(H) and Rh^II(H) hydride species in the mechanism of H₂ production could explain the high efficiency of the photocatalytic system.

Direct observation of key catalytic intermediates in a photoinduced proton reduction cycle with a diiron carbonyl complex

The structure and reactivity of intermediates in the photocatalytic cycle of a proton reduction catalyst, [Fe2(bdt)(CO)6] (bdt = benzenedithiolate), were investigated by time-resolved spectroscopy. The singly reduced catalyst [Fe2(bdt)(CO)6](-), a key intermediate in photocatalytic H2 formation, was generated by reaction with one-electron reductants in laser flash-quench experiments and could be observed spectroscopically on the nanoseconds to microseconds time scale. From UV/vis and IR spectroscopy, [Fe2(bdt)(CO)6](-) is readily distinguished from the two-electron reduced catalyst [Fe2(bdt)(CO)6](2-) that is obtained inevitably in the electrochemical reduction of [Fe2(bdt)(CO)6]. For the disproportionation rate constant of [Fe2(bdt)(CO)6](-), an upper limit on the order of 10(7) M(-1) s(-1) was estimated, which precludes a major role of [Fe2(bdt)(CO)6](2-) in photoinduced proton reduction cycles. Structurally [Fe2(bdt)(CO)6](-) is characterized by a rather asymmetrically distorted geometry with one broken Fe-S bond and six terminal CO ligands. Acids with pK(a) ≤ 12.7 protonate [Fe2(bdt)(CO)6](-) with bimolecular rate constants of 4 × 10(6), 7 × 10(6), and 2 × 10(8) M(-1) s(-1) (trichloroacetic, trifluoroacetic, and toluenesulfonic acids, respectively). The resulting hydride complex [Fe2(bdt)(CO)6H] is therefore likely to be an intermediate in photocatalytic cycles. This intermediate resembles structurally and electronically the parent complex [Fe2(bdt)(CO)6], with very similar carbonyl stretching frequencies.

Nickel complex with internal bases as efficient molecular catalyst for photochemical H2 production

A Ni complex with internal bases that contain bipyridine-derived ligands, [Ni(L)2 (H2 O)2 ](BF4 )2 ([1](BF4 )2 , L=2-(2-pyridyl)-1,8-naphthyridine), and a reference complex that bears analogous bipyridine-derived ligands but without an internal base, [Ni(L')3 ](BF4 )2 ([2](BF4 )2 , L'=2-(2-pyridyl)quinoline), were synthesized and characterized. The electrochemical properties of these complexes were studied in CH3 CN, H2 O, and a mixture of EtOH/H2 O. The fluorescence spectroscopic studies suggest that both dynamic and the sphere-of-action static quenching exist in the fluorescein Fl(2-) /[1](2+) and Fl(2-) /[2](2+) systems. These noble-metal-free molecular systems were studied for photocatalytic H2 generation. Under optimal conditions, the turnover number of H2 evolution reaches 3230 based on [1](2+) , whereas [2](2+) displays only approximately one third of the turnover of [1](2+) . A plausible mechanism for the catalytic H2 generation by [1](2+) is presented based on DFT calculations.

Protein secondary-shell interactions enhance the photoinduced hydrogen production of cobalt protoporphyrin IX

An efficient molecular catalyst for hydrogen production is generated by incorporating Co-protoporphyrin IX into myoglobin. The activity is modulated by engineered mutations.