Conversion of cellulose into isosorbide over bifunctional ruthenium nanoparticles supported on niobium phosphate

Ionic Liquids for the Chemical Recycling of Polymeric Materials and Control of Their Solubility

Plastics are wonderful materials that have modernized our daily life; however, importance of effective recycling of plastics is gradually recognized widely. In this account, we describe our discovery of new and efficient methods for the chemical recycling of plastics using ionic liquids (ILs). Since the chemical recycling usually requires high temperature conditions to breakdown chemical bonds in polymeric materials, we thought that less-flammability and non-volatility of ionic liquids are the most suitable physical properties for this purpose. Ionic liquids successfully depolymerized polyamides and unsaturated polyesters smoothly and corresponding monomeric materials were obtained in good yields. To the best of our knowledge, this was the first use of Ionic liquids for such reactions. However, we encountered another difficult problem-separation. To solve the problem, we developed solubility-switchable ionic liquids, a new type of ionic liquids in which solubility is readily changed using the chemistry of protective groups. Conversion between hydrophilic and lipophilic forms was readily achieved using a simple chemical treatment under mild conditions, and the complete separation of products was achieved by liquid-liquid-extraction. The robustness of either form unlocks their wide use as reaction solvents.

Niobium: The Focus on Catalytic Application in the Conversion of Biomass and Biomass Derivatives

The world scenario regarding consumption and demand for products based on fossil fuels has demonstrated the imperative need to develop new technologies capable of using renewable resources. In this context, the use of biomass to obtain chemical intermediates and fuels has emerged as an important area of research in recent years, since it is a renewable source of carbon in great abundance. It has the benefit of not contributing to the additional emission of greenhouse gases since the CO2 released during the energy conversion process is consumed by it through photosynthesis. In the presented review, the authors provide an update of the literature in the field of biomass transformation with the use of niobium-containing catalysts, emphasizing the versatility of niobium compounds for the conversion of different types of biomass.

Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview

As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.

Size effect of Ru particles on the self-reforming-driven hydrogenolysis of lignin model compound

Particle size always has a great influence on catalytic performance. In this work, we investigated the size effect of Ru colloids on the self-reforming-driven hydrogenolysis of lignin model compound by...

Biomass-derived chemical substitutes for bisphenol A: recent advancements in catalytic synthesis

Bisphenol A is an oil-derived, large market volume chemical with a wide spectrum of applications in plastics, adhesives and thermal papers. However, bisphenol A is not considered safe due to its endocrine disrupting properties and reproductive toxicity. Several functional substitutes of bisphenol A have been proposed in the literature, produced from plant biomass. Unless otherwise specified, the present review covers the most significant contributions that appeared in the time span January 2015-August 2019, describing the sustainable catalytic synthesis of rigid diols from biomass derivatives. The focus is thereupon on heterogeneous catalysis, use of green solvents and mild conditions, cascade processes in one-pot, and continuous flow setups. More than 500 up-to-date references describe the various substitutes proposed and the catalytic methods for their manufacture, broken down according to the main biomass types from which they originate.

One-pot conversion of alginic acid into furfural using Amberlyst-15 as a solid acid catalyst in γ-butyrolactone/water co-solvent system

One-pot conversion of alginic acid, which was derived from brown algae, to furfural was investigated using various solid acid catalysts. Among the solid acid catalysts tested, Amberlyst-15 showed the highest activity in furfural production in aqueous media. When the effect of reaction media was examined by applying various organic solvent mixtures, it was found that γ-butyrolactone/water co-solvent system was selected as the most appropriate system for the reaction. Maximum furfural yield of 32.2% was obtained using Amberlyst-15 in the γ-butyrolactone/H₂O at 210 °C for 20 min. Catalyst showed gradual deactivation behavior as the reaction proceeded, although the catalyst recovered its activity upon the simple treatment with sulfuric acid. N₂ adsorption-desorption experiments, Fourier-transform infrared spectroscopy (FT-IR), back titration, and CHNS analysis were applied to investigate the physicochemical property of post-reaction samples, confirming that the leaching of the active sulfonic acid group and decrease in acid density was the major cause of deactivation.

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

The catalytic conversion of (ligno)cellulose is currently subject of intense research. Isosorbide is one of the interesting products that can be produced from (ligno)cellulose as it can be used for the synthesis of a wide range of pharmaceuticals, chemicals, and polymers. Isosorbide is obtained after the hydrolysis of cellulose to glucose, followed by the hydrogenation of glucose to sorbitol that is then dehydrated to isosorbide. The one-pot process requires an acid and a hydrogenation catalyst. Several parameters are of importance during the direct conversion of (ligno)cellulose such as the acidity, the crystallinity and the particle size of cellulose as well as the nature of the feedstocks. This review highlights all these parameters and all the strategies employed to produce isosorbide from (ligno)cellulose in a one-pot process.

Direct conversion of cellulose into isosorbide over Ni doped NbOPO4 catalysts in water

Ni doped NbOPO₄ catalysts were used efficiently for the one-pot conversion of cellulose to isosorbide under aqueous conditions.

Ru nanoparticles dispersed on magnetic yolk-shell nanoarchitectures with Fe3O4 core and sulfoacid-containing periodic mesoporous organosilica shell as bifunctional catalysts for direct conversion of cellulose to isosorbide

A green and sustainable approach for biorefining involves the development of bifunctional catalysts for the one-pot conversion of cellulosic biomass to isosorbide. This requires highly efficient, easily separated and versatile metal-acid catalysts for hydrolysis-hydrogenation-dehydration cascade reactions. Herein, we report a new type of metal-acid bifunctional catalyst by dispersing Ru nanoparticles (NPs) on magnetic yolk-shell nanoarchitectures comprising an Fe₃O₄ core and a sulfoacid (SO₃H)-containing periodic mesoporous organosilica shell. The resultant magnetic Ru-SO₃H nanoreactors are highly porous and have large surface areas (>350 m² g^-1), uniform mesopores (∼3.8 nm), well-dispersed Ru NPs (<1.5 wt%) and superior magnetization. Tailoring the size of the Ru NPs and the amount of SO₃H moieties produced a highly efficient Ru-SO₃H nanocatalyst, which delivered a high yield of isosorbide of 58.1% with almost complete conversion of cellulose in 2 h and achieved maximum productivity of 2.19 mol_Isosor h^-1 g_Ru^-1, which was one order of magnitude higher than that achieved using other Ru-containing acidic catalysts. Moreover, the elaborately fabricated Ru-SO₃H nanocatalyst can be easily separated by applying an external magnetic field and can be cycled four times. This work reveals new possibilities for the fabrication of highly efficient, easily separated metal-acid catalysts in virtue of the concept of nanoreactor design.

Size-dependent catalytic performance of ruthenium nanoparticles in the hydrogenolysis of a β-O-4 lignin model compound

One-pot depolymerization of lignin to well-defined chemicals and their further deoxygenation to arenes are extremely attractive.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Hydrophilic sulfonic acid-functionalized micro-bead silica for dehydration of sorbitol to isosorbide

The large pore diameter and hydrophilic surface of SA-SiO₂-60.5 are beneficial to sorbitol adsorption and isosorbide desorption, and inhibit the deposition of coke.

Critical design of heterogeneous catalysts for biomass valorization: current thrust and emerging prospects

Catalysis in the heterogeneous phase plays a crucial role in the valorization of biorenewable substrates with controlled reactivity, efficient mechanical process separation, greater recyclability and minimization of environmental effects.

Production of renewable hexanols from mechanocatalytically depolymerized cellulose by using Ir-ReOx /SiO2 catalyst

Hexanols were produced in high yield by conversion of cellulose over Ir-ReOx /SiO2 (molar ratio Re/Ir=2) catalyst in biphasic reaction system (n-decane+H2 O). The cellulose was depolymerized by mechanocatalysis with the aid of H2 SO4 . The influence of solvent amount, reaction temperature and hydrogen pressure was systematically investigated and the highest yield of hexanols reached 60 % under the conditions of n-decane/water ∼2 (v/v), 413 K, 10 MPa H2 for 24 h. Mechanocatalytic depolymerization of cellulose with the aid of H2 SO4 or HCl and the use of sufficient n-decane were very crucial for the production of hexanols. H2 SO4 not only catalyzed cellulose to water-soluble oligosaccharides but also promoted the hydrogenolysis activity of Ir-ReOx /SiO2 catalyst. The role of n-decane was to extract hexanols and to suppress over-hydrogenolysis of hexanols to n-hexane.

Selective dehydration of sorbitol to 1,4-anhydro-d-sorbitol catalyzed by a polymer-supported acid catalyst

Novel polymer-supported Brønsted acid polymer catalysts have been employed for highly selective dehydration of sorbitol to 1,4-anhydro-D-sorbitol.

Sustainable conversion of cellulosic biomass to chemicals under visible-light irradiation

Plasmonic nanostructure: a high conversion (>60%) of crystalline cellulose to chemicals was achieved with enhanced electromagnetic fields, E/E₀ = 10³ to 10⁶ times.

Rapid conversion of sorbitol to isosorbide in hydrophobic ionic liquids under microwave irradiation

Sorbitol was effectively converted to isosorbide by treatment with [TMPA][NTf2 ] in the presence of catalytic amounts of TsOH under microwave heating at 180 °C. The reaction completed within 10 min and isosorbide was isolated to about 60%. Ionic liquids were readily recovered by an extraction treatment and reused several times.

Intercalation-controlled cyclodehydration of sorbitol in water over layered-niobium-molybdate solid acid

Layered niobium molybdate (HNbMoO6 ) was used in the aqueous-phase dehydration of sorbitol and was found to exhibit remarkable selectivity toward its monomolecular-dehydrated intermediate 1,4-sorbitan. This was attributed to the selective intercalation of sorbitol within the interlayers with strong Brønsted acid sites.

Top chemical opportunities from carbohydrate biomass: a chemist's view of the Biorefinery

Cheap fossil oil resources are becoming depleted and crude oil prices are rising. In this context, alternatives to fossil fuel-derived carbon are examined in an effort to improve the security of carbon resources through the development of novel technologies for the production of chemicals, fuels, and materials from renewable feedstocks such as biomass. The general concept unifying the conversion processes for raw biomass is that of the biorefinery, which integrates biofuels with a selection of pivot points towards value-added chemical end products via so-called "platform chemicals". While the concept of biorefining is not new, now more than ever there is the motivation to investigate its true potential for the production of carbon-based products. A variety of renewable chemicals have been proposed by many research groups, many of them being categorized as drop-ins, while others are novel chemicals with the potential to displace petrochemicals across several markets. To be competitive with petrochemicals, carbohydrate-derived products should have advantageous chemical properties that can be profitably exploited, and/or their production should offer cost-effective benefits. The production of drop-ins will likely proceed in short term since the markets are familiar, while the commercial introduction of novel chemicals takes longer and demands more technological and marketing effort.Rather than describing elaborate catalytic routes and giving exhaustive lists of reactions, a large part of this review is devoted to creating a guideline for the selection of the most promising (platform) chemicals derived via chemical-catalytic reaction routes from lignocellulosic biomass. The major rationale behind our recommendations is a maximum conservation of functionality, alongside a high atom economy. Nature provides us with complex molecules like cellulose and hemicellulose, and it should be possible to transform them into chemical products while maintaining aspects of their original structure, rather than taking them completely apart only to put them back together again in a different order, or turning them into metabolites and CO2. Thus, rather than merely pursuing energy content as in the case of biofuels, the chemist sees atom efficiency, functional versatility, and reactivity as the key criteria for the successful valorization of biomass into chemicals.To guide the choice of renewable chemicals and their production, this review adopts the original van Krevelen plots and develops alternative diagrams by introducing a functionality parameter F and a functionality index F:C (rather than O:C). This index is more powerful than the O index to describe the importance of functional groups. Such plots are ideal to assess the effect of several reaction types on the overall functionality in biomass conversion. The atom economy is an additional arbitrator in the evaluation of the reaction types. The assessment is illustrated in detail for the case of carbohydrate resources, and about 25 chemicals, including drop-ins as well as novel chemicals, are selected.Most of these chemicals would be difficult to synthesize from petrochemicals feeds, and this highlights the unique potential of carbohydrates as feedstocks, but, importantly, the products should have a strong applied dimension in existing or rising markets. Ultimately, the production scales of those markets must be harmonized to the biomass availability and its collection and storage logistics.