Further Investigation of a Nickel-Based Homogeneous Water Oxidation Catalyst with Two cis Labile Sites

Electrochemical Water Oxidation and CO2 Reduction with a Nickel Molecular Catalyst

Mimicking the photosynthesis of green plants to combine water oxidation with CO2 reduction is of great significance for solving energy and environmental crises. In this context, a trinuclear nickel complex, [NiII3(paoH)6(PhPO3)2]·2ClO4 (1), with a novel structure has been constructed with PhPO32- (phenylphosphonate) and paoH (2-pyridine formaldehyde oxime) ligands and possesses a reflection symmetry with a mirror plane revealed by single-crystal X-ray diffraction. Bulk electrocatalysis demonstrates that complex 1 can homogeneously catalyze water oxidation and CO2 reduction simultaneously. It can catalyze water oxidation at a near-neutral condition of pH = 7.45 with a high TOF of 12.2 s-1, and the Faraday efficiency is as high as 95%. Meanwhile, it also exhibits high electrocatalytic activity for CO2 reduction towards CO with a TOF of 7.84 s-1 in DMF solution. The excellent electrocatalytic performance of the water oxidation and CO2 reduction of complex 1 could be attributed to the two unique µ3-PhPO32- bridges as the crucial factor for stabilizing the trinuclear molecule as well as the proton transformation during the catalytic process, while the oxime groups modulate the electronic structure of the metal centers via π back-bonding. Therefore, apart from the cooperation effect of the three Ni centers for catalysis, simultaneously, the two kinds of ligands in complex 1 can also synergistically coordinate the central metal, thereby significantly promoting its catalytic performance. Complex 1 represents the first nickel molecular electrocatalyst for both water oxidation and CO2 reduction. The findings in this work open an avenue for designing efficient molecular electrocatalysts with peculiar ligands.

In situ assembly of nickel-based ultrathin catalyst film for water oxidation

A nickel-based ultrathin catalyst film is assembled in situ from a solution of Ni(OAc)2 and a Schiff-base ligand L. The resulting ultrathin catalyst film shows a low overpotential of 330 mV, a steady current of 7 mA cm-2 for water oxidation over 10 h.

Artificial Small Molecules as Cofactors and Biomacromolecular Building Blocks in Synthetic Biology: Design, Synthesis, Applications, and Challenges

Enzymes are essential catalysts for various chemical reactions in biological systems and often rely on metal ions or cofactors to stabilize their structure or perform functions. Improving enzyme performance has always been an important direction of protein engineering. In recent years, various artificial small molecules have been successfully used in enzyme engineering. The types of enzymatic reactions and metabolic pathways in cells can be expanded by the incorporation of these artificial small molecules either as cofactors or as building blocks of proteins and nucleic acids, which greatly promotes the development and application of biotechnology. In this review, we summarized research on artificial small molecules including biological metal cluster mimics, coenzyme analogs (mNADs), designer cofactors, non-natural nucleotides (XNAs), and non-natural amino acids (nnAAs), focusing on their design, synthesis, and applications as well as the current challenges in synthetic biology.

Nickel(II) Complexes of Tripodal Ligands as Catalysts for Fixation of Atmospheric CO2 as Organic Carbonates

The fixation of atmospheric CO₂ into value-added products is a promising methodology. A series of novel nickel(II) complexes of the type [Ni(L)(CH₃ CN)₂ ](BPh₄ )₂ 1-5, where L=N,N-bis(2-pyridylmethyl)-N', N'-dimethylpropane-1,3-diamine (L1), N,N-dimethyl-N'-(2-(pyridin-2-yl)ethyl)-N'-(pyridin-2-ylmethyl) propane-1,3-diamine (L2), N,N-bis((4-methoxy-3,5-dimethylpyridin-2-ylmethyl)-N',N'-dimethylpropane-1,3-diamine (L3), N-(2-(dimethylamino) benzyl)-N',N'-dimethyl-N-(pyridin-2-ylmethyl) propane-1,3-diamine (L4) and N,N-bis(2-(dimethylamino)benzyl)-N', N'-dimethylpropane-1,3-diamine (L5) have been synthesized and characterized as the catalysts for the conversion of atmospheric CO₂ into organic cyclic carbonates. The single-crystal X-ray structure of 2 was determined and exhibited distorted octahedral coordination geometry with cis-α configuration. The complexes have been used as a catalyst for converting CO₂ and epoxides into five-membered cyclic carbonates under 1 atmospheric (atm) pressure at room temperature in the presence of Bu₄ NBr. The catalyst containing electron-releasing -Me and -OMe groups afforded the maximum yield of cyclic carbonates, 34% (TON, 680) under 1 atm air. It was drastically enhanced to 89% (TON, 1780) under pure CO₂ gas at 1 atm. It is the highest catalytic efficiency known for CO₂ fixation using nickel-based catalysts at room temperature and 1 atm pressure. The electronic and steric factors of the ligands strongly influence the catalytic efficiency. Furthermore, all the catalysts can convert a wide range of epoxides (ten examples) into corresponding cyclic carbonate with excellent selectivity (>99%) under this mild condition.

A theoretical study of the role of the non-innocent phenolate ligand of a nickel complex in water oxidation

Water oxidation is the bottleneck of artificial photosynthesis. A novel nickel phenolate complex with a redox-active ligand has been designed to manage multiple electron transfers during water oxidation (D. Wang and C. O. Bruner, Inorg. Chem., 2017, 56, 13638). However, the mechanism of the reaction is not well understood and verified from a theoretical aspect. Density functional theory calculations were conducted to investigate the mechanism of water oxidation catalyzed by the nickel(II)-phenolate complex. Because only two cyclic voltammogram (CV) peaks were observed and the phenolate ligand is redox-active, the active species was proposed to be Ni^III-OH by the experiment. Based on the calculated results, the first CV peak is phenolate ligand-centered and the second peak is a single two-proton-coupled-two-electron process. In addition, the activation barrier of O-O bond formation of Ni^III-OH is higher than that of Ni^IV-2OH by 15.3 kcal mol^-1. Thus, the redox-active phenolate ligand does not lower the oxidation state of Ni in the active species to Ni^III. The oxidation state of the active species is still Ni^IV, the same as other Ni complexes for WOCs. As the phenolate ligand and the hydroxyl ligand can act as an internal base, three pathways are compared for O-O bond formation: normal WNA, phenolate-involving single electron transfer (SET)-WNA, and OH-involving SET-WNA. The OH-involving SET-WNA pathway is the most favorable because the hydroxyl ligand is more nucleophilic than the oxygen radical of the phenolate ligand. Based on the experimental observation and theoretical results, the phenolate ligand is not stable and easily oxidized because of the hydrogen at the benzyl position. Thus, WOC candidates should not have the presence of hydrogen at the benzyl position near the active center.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Homogeneous or heterogeneous electrocatalysis: reinvestigation of a cobalt coordination compound for water oxidation

A cobalt coordination compound with azo-ligand linkers combined with linked bisulfonate moieties has been argued to be an efficient catalyst for the oxygen-evolution reaction (OER) (H.-T. Shi, X.-X. Li, F.-H. Wu and W.-B. Yu, Dalton Trans., 2017, 46, 16321.). In the previously published report, this cobalt compound (compound 1) was believed to display a high turnover frequency (5 s^-1) at η = 720 mV at pH 9. Herein, the OER in the presence of compound 1 is reinvestigated. The nanosized oxide-based particles formed after the OER in the presence of compound 1 were tracked by electrochemical methods, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), X-ray diffraction studies (XRD), (High-resolution) transmission electron microscopy ((HR)TEM), Raman spectroscopy, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). Based on these experiments, it is proposed that a candidate for the true catalyst of the OER in the presence of compound 1 is cobalt oxide. During the OER and using chronoamperometry, the oxidation state of Co ions for the formed Co oxide is (III), but after consecutive CVs the oxidation states of Co ions for the formed Co oxide are (II) and (III). The results shed new light on the role of Co oxide nanoparticles formed in the presence of this Co coordination compound during the OER. Our experimental data also show that for the OER in the presence of a homogeneous (pre)catalyst, careful analyses to find the role of metal oxides are necessary for informed progress. The present findings also might help to find the mechanism of the OER in the presence of coordination compounds.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Design of molecular water oxidation catalysts with earth-abundant metal ions

The four-electron oxidation of water (2H2O → O2 + 4H+ + 4e-) is considered the main bottleneck in artificial photosynthesis. In nature, this reaction is catalysed by a Mn4CaO5 cluster embedded in the oxygen-evolving complex of photosystem II. Ruthenium-based complexes have been successful artificial molecular catalysts for mimicking this reaction. However, for practical and large-scale applications in the future, molecular catalysts that contain earth-abundant first-row transition metal ions are preferred owing to their high natural abundance, low risk of depletion, and low costs. In this review, the frontier of water oxidation reactions mediated by first-row transition metal complexes is described. Special attention is paid towards the design of molecular structures of the catalysts and their reaction mechanisms, and these factors are expected to serve as guiding principles for creating efficient and robust molecular catalysts for water oxidation using ubiquitous elements.

Fixation of atmospheric CO2 as C1-feedstock by nickel(ii) complexes

The development of molecular catalysts for the activation and conversion of atmospheric carbon dioxide (CO₂) into a value-added product is a great challenge. A series of nickel(ii) complexes, [Ni(L)(CH₃CN)₃](BPh₄)₂, 1-4 of diazepane based ligands, 4-methyl-1-[(pyridin-2-yl-methyl)]-1,4-diazepane (L1), 4-methyl-1-[2-(pyridine-2-yl)ethyl]-1,4-diazepane (L2), 4-methyl-1-[(quinoline-2-yl)-methyl]-1,4-diazepane (L3) and 1-[(4-methoxy-3,5-dimethyl-pyridin-2-yl)methyl]-4-methyl-1,4-diazepane (L4), have been synthesized and characterized as catalysts for the activation of atmospheric CO₂. The single-crystal X-ray structure of 1 shows a distorted octahedral geometry with a cis-β configuration around the NiN₆ coordination sphere. All the complexes are used as catalysts for the conversion of atmospheric CO₂ and epoxides into cyclic carbonates at 1 atmosphere (atm) pressure and in the presence of Et₃N. Catalyst 4 was found to be the most efficient catalyst and showed a 31% formation of cyclic carbonates with a TON of 620 under 1 atm air as the CO₂ source. This yield was enhanced to 94% with a TON of 1880 under 1 atm pure CO₂ gas and it is the highest catalytic efficiency known for nickel(ii)-based catalysts. Catalyst 4 enabled the transformation of a wide range of epoxides (eight examples) into corresponding cyclic carbonates with excellent selectivity (>99%) and yields of 59-94% and 11-31% under pure CO₂ and atmospheric CO₂, respectively. The catalytic efficiency is strongly influenced by the electronic nature of the complexes. The CO₂ fixation reactions without an epoxide substrate led to the formation of the carbonate bridged dinuclear nickel(ii) complexes [(LNi^II)₂CO₃](BPh₄)₂1a-4a, which are speculated as catalytically active intermediates. The formation of these species was accompanied by the formation of new absorption bands around 592-681 nm and was further confirmed by the ESI-MS and IR spectral studies. The molecular structures of these carbonate-bridged key intermediates were determined by X-ray analysis. The structures contain two Ni²⁺-centers bridged via a carbonate ion that originated from CO₂. Distorted square pyramidal geometries are adopted around each Ni(ii) center. All these results support that CO₂ fixation reactions occur via CO₂-bound nickel key intermediates.

Two biologically inspired tetranuclear nickel(II) catalysts: effect of the geometry of Ni4 core on electrocatalytic water oxidation

Two biologically inspired tetranuclear nickel complexes [Ni4(L-H)4(CH3COO)3]·Cl (1) and [Ni4(L-H)4(CH3COO)4]·2CH3OH (2) (L = di(pyridin-2-yl)methanediol) have been synthesized and investigated by a combination of X-ray crystallography, PXRD, electrochemistry, in-situ UV-Vis spectroelectrochemistry and DLS. Both of the two complexes feature a core composed of four Ni(II) ions with the same peripheral ligation provided by the anionic di(pyridin-2-yl)methanediol and MeCOO- ligands. Whereas, complex 1 possesses one distorted cubane-like [Ni4(µ3-O)4] core, while 2 has one extended butterfly-like [Ni4(µ3-O)2] core. The homogeneous electrocatalytic reactivity of the two water-soluble complexes for water oxidation have been thoroughly studied, which demonstrates that both of them can efficiently electrocatalyze water oxidation with high stability under alkaline conditions, at relatively low over-potentials (η) of 420-790 mV for 1 and 390-780 mV for 2, both in the pH range of 7.67-12.32, with the high TOF of about 139 s-1 (1) and 69 s-1 (2) at pH = 12.32, respectively. By a series of comparative experiments for complexes 1 and 2, we proposed that their crystal geometries play an important role in their electrocatalytic reactivity for water oxidation. We verified that biomimetic cubane geometry could promote OER catalysis with two very similar compounds for the first time. Compared with 2, the biomimetic cubane topology of 1 could promote OER catalysis by facilitating efficient charge delocalization and electron-transfer.

Homogeneous Catalysts Based on First-Row Transition-Metals for Electrochemical Water Oxidation

Strategies that enable the renewable production of storable fuels (i. e. hydrogen or hydrocarbons) through electrocatalysis continue to generate interest in the scientific community. Of central importance to this pursuit is obtaining the requisite chemical (H+ ) and electronic (e- ) inputs for fuel-forming reduction reactions, which can be met sustainably by water oxidation catalysis. Further possibility exists to couple these redox transformations to renewable energy sources (i. e. solar), thus creating a carbon neutral solution for long-term energy storage. Nature uses a Mn-Ca cluster for water oxidation catalysis via multiple proton-coupled electron-transfers (PCETs) with a photogenerated bias to perform this process with TOF 100∼300 s-1 . Synthetic molecular catalysts that efficiently perform this conversion commonly utilize rare metals (e. g., Ru, Ir), whose low abundance are associated to higher costs and scalability limitations. Inspired by nature's use of 1st row transition metal (TM) complexes for water oxidation catalysts (WOCs), attempts to use these abundant metals have been intensively explored but met with limited success. The smaller atomic size of 1st row TM ions lowers its ability to accommodate the oxidative equivalents required in the 4e- /4H+ water oxidation catalysis process, unlike noble metal catalysts that perform single-site electrocatalysis at lower overpotentials (η). Overcoming the limitations of 1st row TMs requires developing molecular catalysts that exploit biomimetic phenomena - multiple-metal redox-cooperativity, PCET and second-sphere interactions - to lower the overpotential, preorganize substrates and maintain stability. Thus, the ultimate goal of developing efficient, robust and scalable WOCs remains a challenge. This Review provides a summary of previous research works highlighting 1st row TM-based homogeneous WOCs, catalytic mechanisms, followed by strategies for catalytic activity improvements, before closing with a future outlook for this field.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Nickel is a Different Pickle: Trends in Water Oxidation Catalysis for Molecular Nickel Complexes

The development of novel water oxidation catalysts is important in the context of renewable fuels production. Ligand design is one of the key tools to improve the activity and stability of molecular catalysts. The establishment of ligand design rules can facilitate the development of improved molecular catalysts. In this paper it is shown that chemical oxidants can be used to probe oxygen evolution activity for nickel-based systems, and trends are reported that can improve future ligand design. Interestingly, different ligand effects were observed in comparison to other first-row transition metal complexes. For example, nickel complexes with secondary amine donors were more active than with tertiary amine donors, which is the opposite for iron complexes. The incorporation of imine donor groups in a cyclam ligand resulted in the fastest and most durable nickel catalyst of our series, achieving oxygen evolution turnover numbers up to 380 and turnover frequencies up to 68 min-1 in a pH 5.0 acetate buffer using Oxone as oxidant. Initial kinetic experiments with this catalyst revealed a first order in chemical oxidant and a half order in catalyst. This implies a rate-determining oxidation step from a dimeric species that needs to break up to generate the active catalyst. These findings lay the foundation for the rational design of molecular nickel catalysts for water oxidation and highlight that catalyst design rules are not generally applicable for different metals.

Potential- and Buffer-Dependent Catalyst Decomposition during Nickel-Based Water Oxidation Catalysis

The production of hydrogen by water electrolysis benefits from the development of water oxidation catalysts. This development process can be aided by the postulation of design rules for catalytic systems. The analysis of the reactivity of molecular complexes can be complicated by their decomposition under catalytic conditions into nanoparticles that may also be active. Such a misinterpretation can lead to incorrect design rules. In this study, the nickel-based water oxidation catalyst [NiII (meso-L)](ClO4 )2 , which was previously thought to operate as a molecular catalyst, is found to decompose to form a NiOx layer in a pH 7.0 phosphate buffer under prolonged catalytic conditions, as indicated by controlled potential electrolysis, electrochemical quartz crystal microbalance, and X-ray photoelectron spectroscopy measurements. Interestingly, the formed NiOx layer desorbs from the surface of the electrode under less anodic potentials. Therefore, no nickel species can be detected on the electrode after electrolysis. Catalyst decomposition is strongly dependent on the pH and buffer, as there is no indication of NiOx layer formation at pH 6.5 in phosphate buffer nor in a pH 7.0 acetate buffer. Under these conditions, the activity stems from a molecular species, but currents are much lower. This study demonstrates the importance of in situ characterization methods for catalyst decomposition and metal oxide layer formation, and previously proposed design elements for nickel-based catalysts need to be revised.

Dicopper(ii) tetrapyridyl complexes incorporated with ancillary ligands for effective water oxidation

Water oxidation catalysis of dicopper(ii) tetrapyridyl complexes under alkaline conditions was improved by diamine ligands.

An unusual partial occupancy of labile chloride and aqua ligands in cocrystallized isomers of a nickel(II) complex bearing a tripodal N4-donor ligand

A novel Ni²⁺ complex with the N₄-donor tripodal ligand bis[(1-methyl-1H-imidazol-2-yl)methyl][2-(pyridin-2-yl)ethyl]amine (L), namely, aqua{bis[(1-methyl-1H-imidazol-2-yl-κN³)methyl][2-(pyridin-2-yl-κN)ethyl]amine-κN}chloridonickel(II) perchlorate, [NiCl(C₁₇H₂₂N₆)(H₂O)]ClO₄ or [NiCl(H₂O)(L)Cl]ClO₄ (1), was synthesized and characterized by spectroscopic and spectrometric methods. The crystal structure of 1 reveals an interesting and unusual cocrystallization of isomeric complexes, which are crystallographically disordered with partial occupancy of the labile cis aqua and chloride ligands. The Ni²⁺ centre exhibits a distorted octahedral environment, with similar bond lengths for the two Ni-N(imidazole) bonds. The bond length increases for Ni-N(pyridine) and Ni-N(amine), which is in agreement with literature examples. The bond lengths of the disordered labile sites are also in the expected range and the Ni-Cl and Ni-O bond lengths are comparable with similar compounds. The electronic, redox and solution stability behaviour of 1 were also evaluated, and the data obtained suggest the maintenance of structural integrity, with no sign of demetalation or decomposition under the studied conditions.

Electrocatalytic water oxidation by a Ni(ii) salophen-type complex

A new mononuclear Ni(ii) complex, NiL (1), was synthesized from the reaction of Ni(OAc)2·4H2O and salophen-type N2O2-donor ligand, H2L (where H2L = 2,2'-((1E,1'E)-((4-chloro-5-methyl-1,2-phenylene)bis(azanylylidene))bis(methanylylidene))diphenol), in ethanol. The obtained complex was characterized by elemental analysis, spectroscopic techniques and single crystal X-ray analysis. The complex was studied as a water oxidizing catalyst and its electrocatalytic activity in the water oxidation reaction was tested in 0.5 M of borate buffer at pH = 3, 7 and 11 in a typical three-electrode setup with a carbon paste electrode modified by complex 1 as a working electrode. The linear sweep voltammetry (LSV) curves indicated that complex 1 has a much superior activity and only needs 21 mV vs. Ag/AgCl overvoltage to reach a geometrical catalytic current density of 2.0 mA cm-2 at pH = 11. The onset potential decreased from 1.15 V to 0.67 V vs. Ag/AgCl with an increase of pH from 3 to 13 under a constant current density of 1.0 mA cm-2. Then, to determine the true catalyst for the water oxidation reaction in the presence of complex 1 at pH = 3, 7 and 11, cyclic voltammetry was also performed. The continuous CVs for complex 1 at neutral and alkaline solutions showed significant progress for the water oxidation reaction. In addition, the amperometry tests exhibited excellent stability and high constant current density for water oxidation by CPE-complex 1 under electrochemical conditions at pH = 11 and 7. Although X-ray powder diffraction analysis did not show a pure and crystalline structure for NiO x , the scanning electron microscopy images showed that nickel oxide at pH = 11 and nickel oxide or other Ni-based compounds at pH = 7 are true water oxidizing catalysts on the surface of a CPE electrode. Moreover at pH = 3, no clear water oxidation or NiO x formation was observed.

Mono-/Multinuclear Water Oxidation Catalysts

Water splitting, in which water molecules can be transformed into hydrogen and oxygen, is an appealing energy conversion and transformation strategy to address the environmental and energy crisis. The oxygen evolution reaction (OER) is dynamically slow, which limits energy conversion efficiency during the water-splitting process and requires high-efficiency water oxidation catalysts (WOCs) to overcome the OER energy barrier. It is generally accepted that multinuclear WOCs possess superior OER performances, as demonstrated by the CaMn₄ O₅ cluster in photosystem II (PSII), which can catalyze the OER efficiently with a very low overpotential. Inspired by the CaMn₄ O₅ cluster in PSII, some multinuclear WOCs were synthesized that could catalyze water oxidation. In addition, some mononuclear molecular WOCs also show high water oxidation activity. However, it cannot be excluded that the high activity arises from the formation of dimeric species. Recently, some mononuclear heterogeneous WOCs showed a high water oxidation activity, which testified that mononuclear active sites with suitable coordination surroundings could also catalyze water oxidation efficiently. This Review focuses on recent progress in the development of mono-/multinuclear homo- and heterogeneous catalysts for water oxidation. The active sites and possible catalytic mechanisms for water oxidation on the mono-/multinuclear WOCs are provided.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Recent Advances in the Development of Water Oxidation Electrocatalysts at Mild pH

Developing anodic oxygen evolution reaction (OER) electrocatalysts with high catalytic activities is of great importance for effective water splitting. Compared with the water-oxidation electrocatalysts that are commonly utilized in alkaline conditions, the ones operating efficiently under neutral or near neutral conditions are more environmentally friendly with less corrosion issues. This review starts with a brief introduction of OER, the importance of OER in mild-pH media, as well as the fundamentals and performance parameters of OER electrocatalysts. Then, recent progress of the rational design of electrocatalysts for OER in mild-pH conditions is discussed. The chemical structures or components, synthetic approaches, and catalytic performances of the OER catalysts will be reviewed. Some interesting insights into the catalytic mechanism are also included and discussed. It concludes with a brief outlook on the possible remaining challenges and future trends of neutral or near-neutral OER electrocatalysts. It hopefully provides the readers with a distinct perspective of the history, present, and future of OER electrocatalysts at mild conditions.

Recent advances in metalloporphyrins for environmental and energy applications

Porphyrin-based chemistry has reached an unprecedented period of rapid development after decades of study. Due to attractive multifunctional properties, porphyrins and their analogues have emerged as multifunctional organometals for environmental and energy purposes. In particular, pioneer works have been conducted to explore their application in pollution abatement, energy conversion and storage and molecule recognition. This review summarizes recent advances of porphyrins chemistry, focusing on elucidating the nature of catalytic process. The Fenton-like redox chemistry and photo-excitability of porphyrins and their analogues are discussed, highlighting the generation of high-valent iron oxo porphyrin species. Finally, challenges in current research are identified and perspectives for future development in this area are presented.

Homogenous electrochemical water oxidation by a nickel(ii) complex based on a macrocyclic N-heterocyclic carbene/pyridine hybrid ligand

Electrochemical water oxidation catalyzed by a homogeneous Ni–NHC/pyridine complex demonstrated electrolyte-dependent catalytic performances. The catalyst displayed a stable catalytic current of oxygen evolution in long-term bulk electrolysis.

A nickel(ii) complex under water-oxidation reaction: what is the true catalyst?

A Ni(ii) complex as a water-oxidizing catalyst under electrochemical conditions was studied and the role of Ni oxide as a true catalyst was investigated.

Base-enhanced electrochemical water oxidation by a nickel complex in neutral aqueous solution

Electrochemical water oxidation catalyzed by a homogeneous Ni complex at low overpotential in neutral media.

The role of carbonate in electro-catalytic water oxidation by using Ni(1,4,8,11-tetraazacyclotetradecane)2

NiL_i²⁺ are good electro-catalysts for water oxidation in phosphate or carbonate buffers. The results point out that the active oxidizing agents are L(X)Ni^IVOH^{4-(3-n+1)/(2-n+1)}, where X = PO₄H_n^(3-n)- or CO₃H_n^(2-n)- formed from LNi^IVX₂via a mechanism involving an acid catalyzed O-P or O-C bond heterolysis. Carbonate behaves differently from phosphate as it is a non-innocent ligand and it can be oxidized.

Water oxidation catalyzed by two cobalt complexes: new challenges and questions

Herein, two cobalt complexes as true catalysts for water oxidation were investigated.

The application of a nickel(ii) Schiff base complex in water oxidation: the importance of nanosized materials

The role of Ni oxide in the electrocatalytic water oxidation of a nickel(ii) Schiff base (N,N′-bis (salicylidene) ethylenediamino nickel(ii)) is investigated.

Influence of the backbone of N5-pentadentate ligands on the catalytic performance of Ni(ii) complexes for electrochemical water oxidation in neutral aqueous solutions

A positive influence of the rigid backbone of N₅-chelating ligands was demonstrated on the activity of nickel catalysts for electrochemical water oxidation.

Catalytic Water Oxidation by a Bio-inspired Nickel Complex with a Redox-Active Ligand

The oxidation of water (H2O) to dioxygen (O2) is important in natural photosynthesis. One of nature's strategies for managing such multi-electron transfer reactions is to employ redox-active metal-organic cofactor arrays. One prototype example is the copper tyrosinate active site found in galactose oxidase. In this work, we have implemented such a strategy to develop a bio-inspired nickel phenolate complex capable of catalyzing the oxidation of H2O to O2 electrochemically at neutral pH with a modest overpotential. Employment of the redox-active ligand turned out to be a useful strategy to avoid the formation of high-valent nickel intermediates while a reasonable turnover rate (0.15 s-1) is retained.

Electrocatalytic water oxidation by Cu(ii) ions in a neutral borate buffer solution

Herein we report that a Cu(ii) salt can efficiently catalyze water oxidation in a neutral borate buffer.

Novel nickel(ii) complexes of sterically modified linear N4 ligands: effect of ligand stereoelectronic factors and solvent of coordination on nickel(ii) spin-state and catalytic alkane hydroxylation

The donor atom type and diazacyclo backbone of the ligands and solvent of coordination dictate the Ni(ii) spin state (4, LS; 1–3, 5, HS) and catalytic activity of complexes.