Hierarchical Layered WS2 /Graphene-Modified CdS Nanorods for Efficient Photocatalytic Hydrogen Evolution

Novel pyrochlore type europium stannate - tungsten disulfide heterostructure for light driven carbon dioxide reduction and nitrogen fixation

The reduction of carbon dioxide (CO2) and nitrogen (N2) to value-added products is a substantial area of research in the fields of sustainable chemistry and renewable energy that aims at reducing greenhouse gas emissions and the production of alternative fuels and chemicals. The current work deals with the synthesis of pyrochlore-type europium stannate (Eu2Sn2O7: EuSnO), tungsten disulfide (WS2:WS), and novel EuSnO/WS heterostructure by a simple and facile co-precipitation-aided hydrothermal method. Using different methods, the morphological and structural analyses of the prepared samples were characterized. It was confirmed that a heterostructure was formed between the cubic EuSnO and the layered WS. Synthesized materials were used for photocatalytic CO2 and N2 reduction under UV and visible light. The amount of CO and CH4 evolved due to CO2 reduction is high in EuSnO/WS (CO = 104, CH4 = 64 μmol h-1 g-1) compared to pure EuSnO (CO = 36, CH4 = 70 μmol h-1 g-1) and WS (CO = 22, CH4 = 1.8 μmol h-1 g-1) under visible light. The same trend was observed even in the N2 fixation reaction under visible light, and the amount of NH4+ produced was found to be 13, 26, and 41 μmol h-1 g-1 in the presence of WS, EuSnO and EuSnO/WS, respectively. Enhanced light-driven activity towards CO2 and N2 reduction reactions in EuSnO/WS is due to the efficient charge separation through the formation of type-II heterostructure, which is in part associated with photocurrent response, photoluminescence, and electrochemical impedence spectroscopic (EIS) results. The EuSnO/WS heterostructure's exceptional stability and reusability may pique the attention of pyrochlore-based composite materials in photocatalytic energy and environmental applications.

Edge-Rich 3D Structuring of Metal Chalcogenide/Graphene with Vertical Nanosheets for Efficient Photocatalytic Hydrogen Production

Constructing pertinent nanoarchitecture with abundant exposed active sites is a valid strategy for boosting photocatalytic hydrogen generation. However, the controllable approach of an ideal architecture comprising vertically standing transition metal chalcogenides (TMDs) nanosheets on a 3D graphene network remains challenging despite the potential for efficient photocatalytic hydrogen production. In this study, we fabricated edge-rich 3D structuring photocatalysts involving vertically grown TMDs nanosheets on a 3D porous graphene framework (referred to as 3D Gr). 2D TMDs (MoS2 and WS2)/3D Gr heterostructures were produced by location-specific photon-pen writing and metal-organic chemical vapor deposition for maximum edge site exposure enabling efficient photocatalytic reactivity. Vertically aligned 2D Mo(W)S2/3D Gr heterostructures exhibited distinctly boosted hydrogen production because of the 3D Gr caused by synergetic impacts associated with the large specific surface area and improved density of exposed active sites in vertically standing Mo(W)S2. The heterostructure involving graphene and TMDs corroborates an optimum charge transport pathway to rapidly separate the photogenerated electron-hole pairs, allowing more electrons to contribute to the photocatalytic hydrogen generation reaction. Consequently, the size-tailored heterostructure showed a superior hydrogen generation rate of 6.51 mmol g-1 h-1 for MoS2/3D graphene and 7.26 mmol g-1 h-1 for WS2/3D graphene, respectively, which were 3.59 and 3.76 times greater than that of MoS2 and WS2 samples. This study offers a promising path for the potential of 3D structuring of vertical TMDs/graphene heterostructure with edge-rich nanosheets for photocatalytic applications.

Evidence for an Interface of Hybrid Cocatalysts Favoring Photocatalytic Hydrogen Evolution Kinetics

Hybrid cocatalysts have great application potential for improving the photocatalytic hydrogen evolution performance of semiconductors. The interfaces between components of hybrid cocatalysts make a great contribution to the improvement, but the associated mechanisms remain unclear. Herein, we prepared and tested three comparative CdS-based photocatalysts with NiS, NiS/Ni9S8, and Ni9S8 as the cocatalysts separately. The emphasis is placed on investigating the effect of the NiS/Ni9S8 interfaces on the photocatalytic hydrogen evolution performance of CdS. NiS/Ni9S8 exhibits a higher ability than NiS and Ni9S8 in making CdS a more active photocatalyst for water splitting. It shows that NiS, NiS/Ni9S8, and Ni9S8 perform similarly in terms of promoting the charge transfer and separation of CdS based on steady-state and time-resolved photoluminescence studies. At the same time, the linear sweep voltammetry and electrochemical impedance spectroscopy tests combined with the density functional theory calculations reveal that the component interfaces of NiS/Ni9S8 enable us to lower the water splitting activation energy, the charge-transfer resistance from the cocatalyst to sacrificial agent, and hydrogen adsorption Gibbs free energy. It is evidenced from this work that component interfaces of hybrid cocatalysts play a vital role in accelerating the dynamics of hydrogen evolution reactions.

Synthesis of Phase Junction Cadmium Sulfide Photocatalyst under Sulfur-Rich Solution System for Efficient Photocatalytic Hydrogen Evolution

Photocatalyst with excellent semiconductor properties is the key point to realize the efficient photocatalytic hydrogen evolution (PHE). As a representative binary metal sulfide (BMS) semiconductor, cadmium sulfide (CdS) possesses suitable bandgap of 2.4 eV and negative conduction band potential, which has a great potential to realize efficient visible-light PHE performance. In this work, CdS with unique cubic/hexagonal phase junction is facilely synthesized through a sulfur-rich butyldithiocarbamate acid (BDCA) solution process. The results illustrate that the phase junction can efficiently enhance the separation and transfer of photogenerated electron-hole pairs, resulting in an excellent PHE performance. In addition, the sulfur-rich property of BDCA solution leads to the absence of additional sulfur sources during the synthesis of CdS photocatalyst, which greatly simplifies the fabrication process. The optimal PHE rate of the BDCA-synthesized phase junction CdS photocatalyst is 7.294 mmol g^-1  h^-1 and exhibits a favorable photostability. Moreover, density function theory calculations indicated that the apparent redistribution of charge density in the cubic/hexagonal phase junction regions gives a suitable hydrogen adsorption capacity, which is responsible for the enhanced PHE activity.

Fabrication of layered In2S3/WS2 heterostructure for enhanced and efficient photocatalytic CO2 reduction and various paraben degradation in water

Because of the excessive use of fossil fuels, CO₂ emissions into the environment are increasing. An efficient method of converting CO₂ to useful carbonaceous products in the presence of light is one way to address the issues associated with energy and environmental remediation. In₂S₃/WS₂ heterostructure has been fabricated using the efficient hydrothermal method. The results of structural, morphological, optical, and photo/electrochemical characterization confirm the formation of a hierarchical, layered heterostructure of type-II. Enhanced photocatalytic activity is observed in InS/WS heterostructure compared to pristine In₂S₃ and WS₂. InS/WS heterostructure exhibit higher photocatalytic activity than pure In₂S₃ and WS₂. For 12 h, photocatalytic CO₂ reduction produces 213.4 and 188.6 μmol of CO and CH₄, respectively. Furthermore, the photocatalytic ability of the synthesized materials to degrade different parabens (Methyl: MPB, Ethyl: EPB, and Benzyl: BPB) under visible radiation was evaluated. Under optimized conditions, the InS/WS heterostructure degraded 88.6, 90.4, and 95.8% of EPB, BPB, and MPB, respectively, in 90 min. The mechanism of photocatalysis was discussed in detail. MCF-7 cell viability was assessed and found to exhibit low mortality in InS/WS treated MPB aqueous solution. InS/WS heterostructure could improve the fabrication of more sulphide-based layered materials to combat environmental pollution.

ReS2 Cocatalyst Improves the Hydrogen Production Performance of the CdS/ZnS Photocatalyst

Photocatalysis provides an exciting solution to the current growing energy challenge. However, the activity and stability of photocatalysts are two important issues in photocatalytic applications. In this work, we have successfully developed an efficient and stable photocatalyst by loading ReS₂ nanoparticles onto a CdS/ZnS heterojunction. After loading ReS₂, there is a strong interaction between the CdS/ZnS heterojunction and ReS₂, which accelerates the photogenerated charge migration and effectively inhibits the recombination of photogenerated electrons and holes. Accordingly, CdS/ZnS-ReS₂ displays excellent photocatalytic activity and stability with the highest hydrogen production rate of 10 722 μmol g^-1 h^-1, which is approximately 178 times higher than that of the pure CdS and 5 times better than that of CdS/ZnS. This work not only facilitates solar energy conversion to improve photocatalytic activity and stability but also broadens the application of ReS₂ as a cocatalyst.

Photo-Induced Holes Initiating Peroxymonosulfate Oxidation for Carbamazepine Degradation via Singlet Oxygen

Peroxymonosulfate (PMS) has been intensively used to enhance the photocatalytic activity of catalysts, which is adopted as an electron acceptor to inhibit the recombination of electrons and holes. However, the effect of holes generated by visible light (VL) on PMS activation is always overlooked. Herein, the VL/Bi2WO6/PMS process was constructed for the efficient removal of organics, in which the degradation rate of carbamazepine (CBZ) increased by over 33.0 times by the introduction of PMS into Bi2WO6 under visible light. The radical quenching and determination experiments confirmed that the photogenerated holes could firstly oxidize PMS to form SO5•− and react with HSO5− to produce 1O2, then inducing the formation of other reactive species to greatly enhance the performance of pollutant removal by the VL/Bi2WO6/PMS process. Density functional theory (DFT) predicted that sites with high Fukui index (f0) on CBZ were more susceptible to being attacked, resulting in hydroxylation, ring closure, and C=C bond cleavage of CBZ. Toxicity estimation indicated that photocatalysis degradation products from CBZ were less toxic compared to the parent compound. This study provides a potential avenue for improving photocatalytic efficiency and widening the application of photocatalytic technology in wastewater purification.

Tailoring Structure: Current Design Strategies and Emerging Trends to Hierarchical Catalysts

Nature mimicking implies the design of nanostructured materials, which can be assembled into a hierarchical structure, thus outperforming the features of the neat components because of their multiple length scale organization. This approach can be effectively exploited for the design of advanced photocatalysts with superior catalytic activity for energy and environment applications with considerable development in the recent six years. In this context, we propose a review on the state of the art for hierarchical photocatalyst production. Particularly, different synthesis strategies are presented, including template-free structuring, and organic, inorganic, and hybrid templating. Furthermore, emerging approaches based on hybrid and bio-waste templating are also highlighted. Finally, a critical comparison among available methods is carried out based on the envisaged application.

Defected tungsten disulfide decorated CdS nanorods with covalent heterointerfaces for boosted photocatalytic H2 generation

Owing to their intrinsic and pronounced charge carrier transport when facing the formidable challenge of inhibiting severe surface charge recombination, one-dimensional (1D) CdS nanostructures are promising for advancing high-yield hydrogen production. We herein demonstrate an efficient strategy of boosting interfacial carrier separation by heterostructuring 1D CdS with defective WS₂. This process yields solid covalent interfaces for high flux carrier transfer that differ distinctively from those reported structures with physical contacts. As a nonnoble cocatalyst, WS₂ can accept photogenerated electrons from CdS, and the sulfur vacancies existing at its edges can effectively trap electrons as active sites for H₂ evolution. Moreover, due to its strong negative property, the H⁺ from the aqueous solution can gather around WS₂. WS₂ possesses a lower reaction barrier than CdS, which expedites the kinetic process for the reaction. The optimized sample exhibits a high photocatalytic H₂ evolution rate of 183.4 µmol/h (10 mg photocatalyst), which is as far as we know among the top in the records for CdS-based photocatalysts. We believe this present work will be inspiring in addressing the interfacial charge carrier transfer by constructing covalent heterointerfaces.

Light-to-Hydrogen Improvement Based on Three-Factored Au@CeO2/Gr Hierarchical Photocatalysts

Recently, various attempts have been made for light-to-fuels conversion, often with limited performance. Herein we report active and lasting three-factored hierarchical photocatalysts consisting of plasmon Au, ceria semiconductor, and graphene conductor for hydrogen production. The Au@CeO₂/Gr_2.0 entity (graphene outer shell thickness of 2.0 nm) under visible-light irradiation exhibits a colossal achievement (8.0 μmol mg_cat^-1 h^-1), which is 2.2- and 14.3-fold higher than those of binary Au@CeO₂ and free-standing CeO₂ species, outperforming the currently available catalysts. Yet, it delivers a high maximum quantum yield efficiency of 38.4% at an incident wavelength of 560 nm. These improvements are unambiguously attributed to three indispensable effects: (1) the plasmon resonant energy is light-excited and transferred to produce hot electrons localizing near the surface of Au@CeO₂, where (2) the high-surface-area Gr conductive shell will capture them to direct hydrogen evolution reactions, and (3) the active graphene hybridized on the defect-rich surface of Au@CeO₂ favorably adsorbs hydrogen atoms, which all bring up thorough insight into the working of a ternary Au@CeO₂/Gr catalyst system in terms of light-to-hydrogen conversion.

Advances in preparation, mechanism and applications of graphene quantum dots/semiconductor composite photocatalysts: A review

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp² carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis.

P=O Functionalized Black Phosphorus/1T-WS2 Nanocomposite High Efficiency Hybrid Photocatalyst for Air/Water Pollutant Degradation

Research on layered two-dimensional (2D) materials is at the forefront of material science. Because 2D materialshave variousplate shapes, there is a great deal of research on the layer-by-layer-type junction structure. In this study, we designed a composite catalyst with a dimension lower than two dimensions and with catalysts that canbe combined so that the band structures can be designed to suit various applications and cover for each other’s disadvantages. Among transition metal dichalcogenides, 1T-WS₂ can be a promising catalytic material because of its unique electrical properties. Black phosphorus with properly controlled surface oxidation can act as a redox functional group. We synthesized black phosphorus that was properly surface oxidized by oxygen plasma treatment and made a catalyst for water quality improvement through composite with 1T-WS₂. This photocatalytic activity was highly efficient such that the reaction rate constant k was 10.31 × 10⁻² min⁻¹. In addition, a high-concentration methylene blue solution (20 ppm) was rapidly decomposed after more than 10 cycles and showed photo stability. Designing and fabricating bandgap energy-matching nanocomposite photocatalysts could provide a fundamental direction in solving the future’s clean energy problem.

Microcystis@TiO2 Nanoparticles for Photocatalytic Reduction Reactions: Nitrogen Fixation and Hydrogen Evolution

Solar-driven photocatalysis has been known as one of the most potential technologies to tackle the energy shortage and environmental pollution issues. Utilizing bio-pollutants to prepare functional materials has been considered as a green option. Herein, we used Microcystis aeruginosa as a bio-template to fabricate a Microcystis@TiO2 photocatalyst using a calcination method. The as-prepared Microcystis@TiO2 showed prominent ability as well as favorable stability for photocatalytic reduction reactions including hydrogen evolution and nitrogen fixation. Under light illumination, Microcystis@TiO2 calcined at 550 °C exhibited optimal photo-reduced activity among all samples, with the highest hydrogen evolution (1.36 mmol·g−1·h−1) and ammonia generation rates (0.97 mmol·g−1·h−1). This work provides a feasible approach to prepare functional materials from disposed pollutants.

Enhanced sunlight driven photocatalytic activity of In2S3 nanosheets functionalized MoS2 nanoflowers heterostructures

Visible light-sensitive 2D-layered based photocatalytic systems have been proven one of the effective recent trends. We report the preparation of a 2D-layered based In₂S₃-MoS₂ nanohybrid system through a facile hydrothermal method, capable of efficiently degrading of organic contaminants with remarkable efficiency. Transmission electron microscopy (TEM) results inferred the attachment of 2D-layered In₂S₃ sheets with the MoS₂ nanoflakes. Field emission SEM studies with chemical mapping confirm the uniform distribution of Mo, In, and S atoms in the heterostructure, affirming sample uniformity. X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy results confirm the appearance of 2H-MoS₂ and β-In₂S₃ in the grown heterostructures. UV-DRS results reveal a significant improvement in the optical absorbance and significant bandgap narrowing (0.43 eV) in In₂S₃-MoS₂ nanohybrid compared to pristine In₂S₃ nanosheets in the visible region. The effective bandgap narrowing facilitates the charge transfer between MoS₂ and In₂S₃ and remarkably improves the synergistic effect. Effective bandgap engineering and improved optical absorption of In₂S₃-MoS₂ nanohybrids are favorable for enhancing their charge separation and photocatalytic ability. The photocatalytic decomposition efficiency of the pristine In₂S₃ nanosheets and In₂S₃-MoS₂ nanohybrids sample is determined by the decomposing of methylene blue and oxytetracycline molecules under natural sunlight. The optimized In₂S₃-MoS₂ nanohybrids can decompose 97.67% of MB and 76.3% of OTC-HCl molecules solution in 8 min and 40 min of exposure of sunlight respectively. 2D-layered In₂S₃-MoS₂ nanohybrids reveal the tremendous remediation performance towards chemical contaminations and pharmaceutical waste, which indicates their applicability in industrial and practical applications.

Tungsten-Based Catalysts for Environmental Applications

This review aims to give a general overview of the recent use of tungsten-based catalysts for wide environmental applications, with first some useful background information about tungsten oxides. Tungsten oxide materials exhibit suitable behaviors for surface reactions and catalysis such as acidic properties (mainly Brønsted sites), redox and adsorption properties (due to the presence of oxygen vacancies) and a photostimulation response under visible light (2.6–2.8 eV bandgap). Depending on the operating condition of the catalytic process, each of these behaviors is tunable by controlling structure and morphology (e.g., nanoplates, nanosheets, nanorods, nanowires, nanomesh, microflowers, hollow nanospheres) and/or interactions with other compounds such as conductors (carbon), semiconductors or other oxides (e.g., TiO2) and precious metals. WOx particles can be also dispersed on high specific surface area supports. Based on these behaviors, WO3-based catalysts were developed for numerous environmental applications. This review is divided into five main parts: structure of tungsten-based catalysts, acidity of supported tungsten oxide catalysts, WO3 catalysts for DeNOx applications, total oxidation of volatile organic compounds in gas phase and gas sensors and pollutant remediation in liquid phase (photocatalysis).

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃ O₄ /polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃ O₄ /PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.

Efficient Charge Migration in Chemically-Bonded Prussian Blue Analogue/CdS with Beaded Structure for Photocatalytic H2 Evolution

The design of a powerful heterojunction structure and the study of the interfacial charge migration pathway at the atomic level are essential to mitigate the photocorrosion and recombination of electron-hole pairs of CdS in photocatalytic hydrogen evolution (PHE). A temperature-induced self-assembly strategy has been proposed for the syntheses of Prussian blue analogue (PBA)/CdS nanocomposites with beaded structure. The specially designed structure had evenly exposed CdS which can efficiently harvest visible light and inhibit photocorrosion; meanwhile, PBA with a large cavity provided channels for mass transfer and photocatalytic reaction centers. Remarkably, PB-Co/CdS-LT-3 exhibits a PHE rate of 57 228 μmol h^-1 g^-1, far exceeding that of CdS or PB-Co and comparable to those of most reported crystalline porous material-based photocatalysts. The high performances are associated with efficient charge migration from CdS to PB-Co through CN-Cd electron bridges, as revealed by the DFT calculations. This work sheds light on the exploration of heterostructure materials in efficient PHE.

Surface plasmon-driven photocatalytic activity of Ni@NiO/NiCO3 core-shell nanostructures

Ni@NiO/NiCO3 core-shell nanostructures have been investigated for surface plasmon driven photocatalytic solar H2 generation without any co-catalyst. Huge variation in the photocatalytic activity has been observed in the pristine vs. post-vacuum annealed samples with the maximum H2 yield (∼110 μmol g-1 h-1) for the vacuum annealed sample (N70-100/2 h) compared to ∼92 μmol g-1 h-1 for the pristine (N70) photocatalyst. Thorough structural (X-ray diffraction) and spectroscopic (X-ray photoelectron spectroscopy and transmission electron microscopy coupled electron energy loss spectroscopy) investigations reveal the core Ni nanoparticle decorated with the shell, a composite of crystalline NiO and amorphous NiCO3. Significant visible light absorption at ∼475 nm in the UV-vis region along with the absence of a peak/edge corresponding to NiO suggest the role of surface plasmons in the observed catalytic activity. As per the proposed mechanism, amorphous NiCO3 in the shell has been suggested to serve as the dielectric medium/interface, which enhances the surface plasmon resonance and boosts the HER activity.

Highly efficient solar-driven photocatalytic hydrogen evolution by a ternary 3D ZnIn2S4–MoS2 microsphere/1D TiO2 nanobelt heterostructure

Herein, a novel ternary three-dimensional (3D) ZnIn₂S₄–MoS₂ microsphere/one-dimensional (1D) TiO₂ nanobelt photocatalyst was created, achieving excellent photocatalytic H₂ evolution performance under visible light irradiation.

Carbon-Graphitic Carbon Nitride Hybrids for Heterogeneous Photocatalysis

Polymeric graphitic carbon nitride (g-C₃ N₄ ) and various carbon materials have experienced a renaissance as viable alternates in photocatalysis due to their captivating metal-free features, favorable photoelectric properties, and economic adaptabilities. Although numerous efforts have focused on the integration of both materials with optimized photocatalytic performance in recent years, the direct parameters for this emerging enhancement are not fully summarized yet. Fully understanding the synergistic effects between g-C₃ N₄ and carbon materials on photocatalytic action is vital to further development of metal-free semiconductors in future studies. Here, recent advances of carbon/g-C₃ N₄ hybrids on various photocatalytic applications are reviewed. The dominant governing factors by inducing carbon into g-C₃ N₄ photocatalysts with involving photocatalytic mechanism are highlighted. Five typical carbon-induced enhancement effects are mainly discussed here, i.e., local electric modification, band structure tailoring, multiple charge carrier activation, chemical group functionalization, and abundant surface-modified engineering. Photocatalytic performance of carbon-induced g-C₃ N₄ photocatalysts for addressing directly both the renewable energy storage and environmental remediation is also summarized. Finally, perspectives and ongoing challenges encountered in the development of metal-free carbon-induced g-C₃ N₄ photocatalysts are presented.

Harnessing photo/electro-catalytic activity via nano-junctions in ternary nanocomposites for clean energy

Though solar energy availability is predicted for centuries, the diurnal and asymmetrical nature of the sun across the globe presents significant challenges in terms of harvesting sunlight. Photo/electro-catalysis, currently believed to be the bottleneck, promises a potential solution to these challenges along with a green and sustainable environment. This review aims to provide the current highlights on the application of inorganic-semiconductor-based ternary nanocomposites for H2 production and pollutant removal. Various engineering strategies employing integration of 2D materials, 1D nanorods, and/or 0D nanoparticles with inorganic semiconductors to create multiple nano-junctions have been developed for the excellent photocatalytic activity. Following a succinct description of the latest progress in photocatalysts, a discussion on the importance of ternary electrocatalysts in the field of next-generation supercapacitors has been included. Finally, the authors' perspectives are considered briefly, including future developments and critical technical challenges in the ever-growing field of photo/electro-catalysis.

Enhanced Light-Driven Charge Separation and H2 Generation Efficiency in WSe2 Nanosheet-Semiconductor Nanocrystal Heterostructures

Semiconductor-catalyst heterostructures have shown promising performances for light-driven H₂ generation, although further development of these materials is hindered by the lack of cost-effective and efficient catalysts. In this paper, we adopt a colloidal method to prepare few-layer WSe₂ nanosheets without exfoliation and apply them as catalysts for forming heterostructures with a wide range of semiconductor absorbers (CdS nanorods, CdSe/CdS dot-in-rods, TiO₂ nanoparticles, g-C₃N₄ nanosheets). These WSe₂-semiconductor heterostructures show enhanced solar-to-hydrogen conversion efficiencies compared to semiconductors without WSe₂. The detailed mechanism of this enhancement has been investigated using WSe₂ nanosheet-decorated CdSe/CdS dot-in-rods as a model system, which display ∼5.5-fold higher hydrogen generation apparent quantum efficiency compared to free CdSe/CdS dot-in-rods. Transient absorption spectroscopic studies reveal efficient charge separation in WSe₂-decorated CdSe/CdS dot-in-rods, suggesting its key role in enhancing the H₂ generation efficiency of WSe₂-semiconductor heterostructures. This work demonstrates the great potentials of WSe₂ nanosheets as catalysts for light-driven hydrogen production and the important effect of forming WSe₂-semiconductor heterostructures in facilitating charge separation and photocatalysis.

Ultrasound-engineered synthesis of WS2@CeO2 heterostructure for sonocatalytic degradation of tylosin

The main aim of the present investigation was the intercalation of WS₂ nanosheets in the structure of ceria (CeO₂) to be used for the efficient catalytic destruction of tylosin (TYL) as a macrolide antibiotic in water. As-synthesized heterostructured catalyst was placed in a sono-reactor (40 kHz and 300 W) in order to degrade TYL through the sonocatalysis. 15 wt% WS₂/CeO₂ was chosen for performing the systematic experiments. Decreasing the concentration of TYL, along with increasing the WS₂/CeO₂ dosage led to reduced degradation efficiency. The water hardness was demonstrated to be a suppressive agent on the sonocatalysis of the target pollutant. As-generated holes, OH, and also O₂^- were responsible for the degradation of TYL. Increasing the ultrasound power and operating temperature enhanced the degradation efficiency. The degradation rate boosted up when the temperature was raised from 10 °C (0.0107 1/min) to 40 °C (0.0165 1/min). Moreover, the lowest activation energy (E_a) for sonocatalytic degradation was obtained as 10.81 kJ/mol. The sonocatalytic activity of WS₂/CeO₂ in the sono-reactor encountered insignificant change within five consecutive operational runs (~15% reduction). The mechanism and pathways of the sonocatalytic decomposition of TYL are also proposed.

Crystalline Carbon Nitride Supported Copper Single Atoms for Photocatalytic CO2 Reduction with Nearly 100% CO Selectivity

Single metal atom photocatalysts have received widespread attention due to the rational use of metal resources and maximum atom utilization efficiency. In particular, N-rich amorphous g-C₃N₄ is always used as a support to anchor single metal atoms. However, the enhancement of photocatalytic activity of g-C₃N₄ by introducing a single atom is limited due to the bulk morphology and the excess defects of amorphous g-C₃N₄. Here, we report crystalline g-C₃N₄ nanorod supported copper single atoms by molten salts and the reflux method. The prepared single Cu atoms/crystalline g-C₃N₄ photocatalyst (Cu-CCN) shows highly selective and efficient photocatalytic reduction of CO₂ under the absence of any cocatalyst or sacrificial agent. The introduction of single Cu atoms can be used as the CO₂ adsorption site, thus increasing the adsorption capacity of Cu-CCN samples to CO₂. Theoretical calculation results show that reducing CO₂ to CH₄ on Cu-CCN samples is an entropy-increasing process, whereas reducing CO₂ to CO is an entropy-decreasing process. As a result, the Cu-CCN samples exhibited enhanced photocatalytic CO₂ reduction with nearly 100% selective photocatalytic CO₂ to CO conversion. The mechanism of photocatalytic CO₂ reduction over Cu-CCN samples was proposed based on in situ Fourier transform infrared spectra, X-ray absorption spectroscopy, and density functional theory calculation. This work provides an in-depth understanding of the design of photocatalysts for enhancing active sites of the reactants.

Facile Preparation of WO3-x Dots with Remarkably Low Toxicity and Uncompromised Activity as Co-reactants for Clinical Diagnosis by Electrochemiluminescence

The exceptional nature of WO_3-x dots has inspired widespread interest, but it is still a significant challenge to synthesize high-quality WO_3-x dots without using unstable reactants, expensive equipment, and complex synthetic processes. Herein, the synthesis of ligand-free WO_3-x dots is reported that are highly dispersible and rich in oxygen vacancies by a simple but straightforward exfoliation of bulk WS₂ and a mild follow-up chemical conversion. Surprisingly, the WO_3-x dots emerged as co-reactants for the electrochemiluminescence (ECL) of Ru(bpy)₃ ²⁺ with a comparable ECL efficiency to the well-known Ru(bpy)₃ ²⁺ /tripropylamine (TPrA) system. Moreover, compared to TPrA, whose toxicity remains a critical issue of concern, the WO_3-x dots were ca. 300-fold less toxic. The potency of WO_3-x dots was further explored in the detection of circulating tumor cells (CTCs) with the most competitive limit of detection so far.

Facile in situ formation of a ternary 3D ZnIn2S4-MoS2 microsphere/1D CdS nanorod heterostructure for high-efficiency visible-light photocatalytic H2 production

To achieve high photocatalytic efficiency, developing heterostructure photocatalysts by integrating two or more semiconductor materials into a well-oriented nanostructure is an effective strategy. Therefore, under visible light irradiation, a novel ternary 3D ZnIn2S4-MoS2 microsphere/1D CdS nanorod (ZIS/MoS2/CdS) photocatalyst with excellent H2 evolution ability was prepared. For this purpose, using the solvothermal method, interfacial contact ZIS/MoS2 microspheres were prepared, and 1D CdS nanorods were closely inserted into the interspace of flower-shaped ZIS/MoS2 microspheres, to generate close contact between ZnIn2S4, MoS2, and CdS. To expedite the production, separation, and transfer of photoinduced electron-hole pairs, this unique ternary heterostructure demonstrated excellent energy level distribution and a dimensional structure. Under the same conditions, the H2 production rate of the component proportion of the 150%-ZIS/10%-MoS2/CdS (150 wt% ZIS and 10 wt% MoS2) photocatalyst reached 7570.4 μmol g-1 h-1, which was ∼39.8 and 69.0 times higher than that achieved using bare ZnIn2S4 and CdS, respectively. Furthermore, the apparent quantum efficiency (AQE) reached 30.38% at 420 nm within 6 h; thus, for designing photocatalysts with a diversiform structure and spatial charge separation, this study provides new tactics.

Smart Assembly of Sulfide Heterojunction Photocatalysts with Well-Defined Interfaces for Direct Z-Scheme Water Splitting under Visible Light

A Z-scheme photocatalytic water-splitting system is an effective approach to integrate the advantages both hydrogen- and oxygen-evolution photocatalysts. The interfacial properties of the heterojunctions have a great influence on the efficiency through the crystal orientation and the charge kinetics. In this study, a general chemical vapor deposition process and a gentle cation-exchange method were combined to assemble Z-scheme photocatalysts between CdS and MnS. As a result of the well-defined heterojunction interfaces and distinctive structural benefits, without cocatalysts, the 1 D CdS/MnS hybrid photocatalyst exhibited a significantly increased photocatalytic H₂ evolution rate of 1595 μmol h^-1  g^-1 (apparent quantum efficiency of 22.6 % at λ=420 nm), which is over 10.5 times higher than that of CdS. Moreover, a better photocatalytic stability is demonstrated over particulate (42 h cycling measurement) and photoelectrochemical (3000 min continuous measurement) systems. Overall, this work provides a unique experimental insight into high-quality heterojunction interface design and new Z-scheme photocatalyst synthesis.

Synthesis of Novel 1T/2H-MoS2 from MoO3 Nanowires with Enhanced Photocatalytic Performance

Metallic 1T-phase MoS₂ is a newly emerging and attractive catalyst since it has more available active sites and high carrier mobility in comparison with its widely used counterpart of semiconducting 2H-MoS₂. Herein, 1T/2H-MoS₂(N) (N: MoO₃ nanowires were used to prepare 1T/2H-MoS₂) was synthesized by using molybdenum trioxide (MoO₃) nanowires as the starting material and applied in the photodegradation of antibiotic residue in water. Enhanced photocatalytic performance was observed on the obtained 1T/2H-MoS₂(N), which was 2.8 and 1.3 times higher than those on 1T/2H-MoS₂(P) (P: commercial MoO₃ powder was used to prepare 1T/2H-MoS₂) and 2H-MoS₂, respectively. The active component responsible for the photodegradation was detected and a reaction mechanism is proposed.

Remarkably efficient charge transfer through a double heterojunction mechanism by a CdS-SnS-SnS2/rGO composite with excellent photocatalytic performance under visible light

In this work, a novel CdS-SnS-SnS₂/rGO photocatalyst with two tin valence states (Ⅱ and IV) was successfully synthesized by a one-pot solvothermal method. For comparison, CdS-SnS₂/rGO (GCS2) with tin in only the IV valence state was made by the same method. Based on a series of characterizations, CdS, SnS and SnS₂ were shown to be successfully loaded onto the rGO surface. The introduction of rGO may increase charge carrier separation. The degradation efficiency increased gradually with increasing rGO loading content, and the optimum photocatalytic activity was observed at 6.0 wt% rGO loading content (GCS1), which achieved the efficient removal (84.46%) of ibuprofen over 60 min. Compared with GCS2, the CdS-SnS-SnS₂/rGO composite exhibited significantly improved photocatalytic performance, which can be ascribed to the formation of a double heterostructure. rGO worked as a transfer mediator to transfer electrons from the conduction band (CB) of SnS to the CB of SnS₂ at the heterointerface, which then flowed to the CB of CdS because of another heterojunction, further enhancing the separation efficiency of photogenerated carriers. Therefore, this study highlights a novel double heterojunction system with a facial preparation method, visible light response and good recyclability, which is beneficial for environmental remediation.

Porous graphitic carbon nitride for solar photocatalytic applications

Photocatalysis is attracting increased attention in solving the energy crisis and environmental pollution. Graphitic carbon nitride (g-C3N4), a non-metal photocatalyst, has been regarded as an ideal photocatalyst to solve these problems because of its chemical stability and unique optical properties. However, traditional g-C3N4 exhibits moderate photocatalytic activity due to its low specific surface area and fast recombination rate of photogenerated electrons. Among the many modified g-C3N4 materials, porous carbon nitride (PCN) can solve the shortcomings of traditional g-C3N4 because of PCN's increased number of surface-active sites, specific surface area, light harvesting, diffusion and adsorption/activation. However, a frontier, comprehensive summary of the development of PCN is less reported. Thus, a review on recent developments in PCN research is urgently needed to further promote its advancement. In this review, the synthesis methods, structures and properties and photocatalytic applications of PCN photocatalysts are described in detail. The current challenges and future development of PCN/PCN-based photocatalysts are discussed. This review may present an up-to-date view of the PCN development to provide an in-depth understanding of PCN-based photocatalysts.

Reduced Turn-On Voltage and Boosted Mobility in Monolayer WS2 Transistors by Mild Ar+ Plasma Treatment

Monolayer two-dimensional transition-metal dichalcogenides, such as tungsten disulfide (WS₂), are regarded as promising candidates for optoelectronic and electronic applications. Although theoretical calculations have predicted outstanding electronic properties of WS₂, the performance of WS₂-based electronic devices is still limited by the relatively high Schottky barrier and low carrier mobility. In this work, low-energy argon (Ar⁺) plasma treatment was used as a nondestructive preconditioning technique to tailor the electrical properties of the WS₂ monolayer grown by chemical vapor deposition. Photoluminescence and Raman spectroscopy were used to monitor the modified optical properties of WS₂ with increasing plasma treatment time. An improved electrical conductivity was observed after a short-time plasma treatment. The physical mechanism was further revealed by a comparative study between top-electrode and bottom-electrode devices and simulation based on the density functional theory. It is concluded that mild Ar⁺ plasma treatment can effectively lower the Schottky barrier height and the effective mass of carriers, which reduces the turn-on voltage and enhances the mobility, respectively. However, if the processing time is too long, the WS₂ lattice structure will be destroyed. This work has provided an effective method for manipulating the Schottky barrier and mobility of monolayer WS₂ transistors and paves the way for developing high-performance electronic devices based on 2D semiconductors.

Novel Architecture Titanium Carbide (Ti3C2Tx) MXene Cocatalysts toward Photocatalytic Hydrogen Production: A Mini-Review

Low dimensional transition metal carbide and nitride (MXenes) have been emerging as frontier materials for energy storage and conversion. Ti3C2Tx was the first MXenes that discovered and soon become the most widely investigated among the MXenes family. Interestingly, Ti3C2Tx exhibits ultrahigh catalytic activity towards the hydrogen evolution reaction. In addition, Ti3C2Tx is electronically conductive, and its optical bandgap is tunable in the visible region, making it become one of the most promising candidates for the photocatalytic hydrogen evolution reaction (HER). In this review, we provide comprehensive strategies for the utilization of Ti3C2Tx as a catalyst for improving solar-driven HER, including surface functional groups engineering, structural modification, and cocatalyst coupling. In addition, the reaming obstacle for using these materials in a practical system is evaluated. Finally, the direction for the future development of these materials featuring high photocatalytic activity toward HER is discussed.

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

On the heels of exacerbating environmental concerns and ever-growing global energy demand, development of high-performance renewable energy-storage and -conversion devices has aroused great interest. The electrode materials, which are the critical components in electrochemical energy storage (EES) devices, largely determine the energy-storage properties, and the development of suitable active electrode materials is crucial to achieve efficient and environmentally friendly EES technologies albeit the challenges. Two-dimensional transition-metal chalcogenides (2D TMDs) are promising electrode materials in alkali metal ion batteries and supercapacitors because of ample interlayer space, large specific surface areas, fast ion-transfer kinetics, and large theoretical capacities achieved through intercalation and conversion reactions. However, they generally suffer from low electronic conductivities as well as substantial volume change and irreversible side reactions during the charge/discharge process, which result in poor cycling stability, poor rate performance, and low round-trip efficiency. In this Review, recent advances of 2D TMDs-based electrode materials for alkali metal-ion energy-storage devices with the focus on lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), potassium-ion batteries (PIBs), high-energy lithium-sulfur (Li-S), and lithium-air (Li-O₂ ) batteries are described. The challenges and future directions of 2D TMDs-based electrode materials for high-performance LIBs, SIBs, PIBs, Li-S, and Li-O₂ batteries as well as emerging alkali metal-ion capacitors are also discussed.

Porous lantern-like MFI zeolites composed of 2D nanosheets for highly efficient visible light-driven photocatalysis

Porous lantern-like MFI zeolites composed of 2D nanosheets were fabricated for highly efficient visible light-driven photocatalysis.

Integration of perovskite type Bi2MoO6 nanosheets onto one dimensional CdS: a type-II heterostructured photocatalytic system for efficient charge separation in the hydrogen evolution reaction

Bi₂MoO₆ nanosheets were assembled onto CdS nanorods and the resultant CdS-Bi₂MoO₆ core–shell heterostructures were utilized for efficient H₂ evolution reaction.