Human Urine-Fueled Light-Driven NADH Regeneration for Redox Biocatalysis

Solar-Driven Catalytic Urea Oxidation for Environmental Remediation and Energy Recovery

The water-energy nexus is highly related to sustainable societal development. As one of the most abundant biowastes discharged into the environment, mild abatements and green conversions of urea wastewater have been widely investigated. Due to abundant sources, global distribution, and easy control, light-based catalytic strategies have become alternative on-site treatment approaches. After comprehensively surveying the recent progress, recent achievements of urea oxidation under light irradiation are reviewed herein. Several typical light-promoted systems employed in urea conversion, including photocatalysis, photo-electrocatalysis, photo-biocatalysis, and photocatalytic fuel cells, are meticulously introduced and discussed, from catalyst designs and medium conditions to established mechanisms. To realize the goal of sustainability, the chemical energy in urea-rich water could be utilized for the value-added production of hydrogen fuel and electricity. Finally, based on current developments, existing challenges are enumerated and developmental prospects in the future of light-driven urea conversion technologies are proposed.

Digital Pregnancy Test Powered by an Air-Breathing Paper-Based Microfluidic Fuel Cell Stack Using Human Urine as Fuel

The direct integration of paper-based microfluidic fuel cells (μFC's) toward creating autonomous lateral flow assays has attracted attention. Here, we show that an air-breathing paper-based μFC could be used as a power supply in pregnancy tests by oxidizing the human urine used for the diagnosis. We present an air-breathing paper-based μFC connected to a pregnancy test, and for the first time, as far as we know, it is powered by human urine without needing any external electrolyte. It uses TiO2-Ni as anode and Pt/C as cathode; the performance shows a maximum value of voltage and current and power densities of ∼0.96 V, 1.00 mA cm-2, and 0.23 mW cm-2, respectively. Furthermore, we present a simple design of a paper-based μFC's stack powered with urine that shows a maximum voltage and maximum current and power densities of ∼1.89 V, 2.77 mA cm-2 and 1.38 mW cm-2, respectively, which powers the display of a pregnancy test allowing to see the analysis results.

A versatile optofluidic microreactor for artificial photosynthesis induced coenzyme regeneration and L-glutamate synthesis

With the rapid development of modern society, the energy crisis has become a global concern. Solar energy is a good replacement because it is green, unlimited and environment-friendly. Inspired by natural photosynthesis, artificial photosynthesis was developed to convert solar energy to chemical energy by a photocatalyst system. For better utilizing solar energy and improving the conversion efficiency, the design of photoreactors is crucial for the improvement of photocatalysis efficiency. However, most of the reported microreactors hardly satisfy the demands for low cost, easy fabrication, high transparency, being evaporation-proof, ease of scaling up, high surface-to-volume ratio, and photocatalyst immobilization. In this paper, we developed a facile method to build a fully immobilized microreactor (FIM) and a controllable partially immobilized microreactor (PIM), both of which satisfy all the demands mentioned above. In the FIM, the regeneration rate of a coenzyme (nicotinamide adenine dinucleotide, NADH) reached 82.20% in 40 min. Considering the NADH regeneration rate per unit/coating angle of photocatalysts in circular microreactors, the PIM performed much better than the FIM, proving that our partial coating method is a significant and useful improvement. Also, the bioactivity of NADH toward enzyme catalysis was demonstrated by glutamate dehydrogenase-catalyzed synthesis of L-glutamate, and the conversion of α-ketoglutarate reached 99.92%. To test the practicality of the microreactor in a real environment, we performed a test under solar light, achieving a good result of 74.92% in 60 min. Thus, this efficient and versatile microfluidic platform may have good potential for photocatalytic synthesis of versatile valuable products in the future.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

Carbonic anhydrase/formate dehydrogenase bienzymatic system for CO2 capture, utilization and storage

In order to establish carbon capture, utilization, and storage (CCUS) technology, a system consisting of two different biocatalysts (formate dehydrogenase from Candida boidinii; CbFDH and carbonic anhydrase from bovine erythrocytes; CA) is developed.

The challenges of using NAD+-dependent formate dehydrogenases for CO2 conversion

In recent years, CO₂ reduction and utilization have been proposed as an innovative solution for global warming and the ever-growing energy and raw material demands. In contrast to various classical methods, including chemical, electrochemical, and photochemical methods, enzymatic methods offer a green and sustainable option for CO₂ conversion. In addition, enzymatic hydrogenation of CO₂ into platform chemicals could be used to produce economically useful hydrogen storage materials, making it a win-win strategy. The thermodynamic and kinetic stability of the CO₂ molecule makes its utilization a challenging task. However, Nicotine adenine dinucleotide (NAD⁺)-dependent formate dehydrogenases (FDHs), which have high selectivity and specificity, are attractive catalysts to overcome this issue and convert CO₂ into fuels and renewable chemicals. It is necessary to improve the stability, cofactor necessity, and CO₂ conversion efficiency of these enzymes, such as by combining them with appropriate hybrid systems. However, metal-independent, NAD⁺-dependent FDHs, and their CO₂ reduction activity have received limited attention to date. This review outlines the CO₂ reduction ability of these enzymes as well as their properties, reaction mechanisms, immobilization strategies, and integration with electrochemical and photochemical systems for the production of formic acid or formate. The biotechnological applications of FDH, future perspectives, barriers to CO₂ reduction with FDH, and aspects that must be further developed are briefly summarized. We propose that constructing hybrid systems that include NAD⁺-dependent FDHs is a promising approach to convert CO₂ and strengthen the sustainable carbon bio-economy.

Photocatalyst-enzyme hybrid systems for light-driven biotransformation

Enzymes catalyse target reactions under mild conditions with high efficiency, as well as excellent regional-, stereo-, and enantiomeric selectivity. Photocatalysis utilises sustainable and environment-friendly light power to realise efficient chemical conversion. By combining the interdisciplinary advantages of photo- and enzymatic catalysis, the photocatalyst-enzyme hybrid systems have proceeded various light-driven biotransformation with high efficiency under environmentally benign conditions, thus, attracting unparalleled focus during the last decades. It has also been regarded as a promising pathway towards green chemistry utilising ubiquitous solar energy. This systematic review gives insight into this research field by classifying the existing photocatalyst-enzyme hybrid systems into three sections based on different hybridizing modes between photo- and enzymatic catalysis. Furthermore, existing challenges and proposed strategies are discussed within this context. The first system summarised is the cofactor-mediated hybrid system, in which natural/artificial cofactors act as reducing equivalents that connect photocatalysts with enzymes for light-driven enzymatic biotransformation. Second, the direct contact-based photocatalyst-enzyme hybrid systems are described, including two different kinds of electron exchange sites on the enzyme molecules. Third, some cases where photocatalysts and enzymes are integrated into a reaction cascade with specific intermediates will be discussed in the following chapter. Finally, we provide perspective concerning the future of this field.

Visible-light driven reduction of CO2 to formate by a water-soluble zinc porphyrin and formate dehydrogenase system with electron-mediated amino and carbamoyl group-modified viologen

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc porphyrin, formate dehydrogenase from Candida boidinii and 1-amino-1′-carbamoyl-4,4′-bipyridinium salt as an electron mediator in the presence of triethanolamine was developed.

Visible-light-driven CO2 reduction to formate with a system of water-soluble zinc porphyrin and formate dehydrogenase in ionic liquid/aqueous media

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc tetraphenylporphyrin tetrasulfonate (ZnTPPS), formate dehydrogenase from Candida boidinii (CbFDH) and methylviologen (MV) in the presence of triethanolamine (TEOA) as an electron donor in an ionic liquid, 1-ethyl-3-methylimidazolium dimethyl phosphate ([EMlm][Me₂PO₄])/aqueous media was investigated. The catalytic activity of CbFDH for formate oxidation to CO₂ and CO₂ reduction to formate did not decrease significantly even in [EMlm][Me₂PO₄]/aqueous media, compared with that in aqueous media. The visible-light-driven MV reduction by the photosensitization of ZnTPPS in [EMlm][Me₂PO₄]/aqueous media proceeds more efficiently than in the aqueous media system. In the visible-light-driven CO₂ reduction to formate system of ZnTPPS, MV and CbFDH with [EMlm][Me₂PO₄]/aqueous media, moreover, the formate production concentration after 180 min decreased by only 20% as compared with the system in aqueous media.

CO2 -Reductive, Copper Oxide-Based Photobiocathode for Z-Scheme Semi-Artificial Leaf Structure

Green plants convert sunlight into high-energy chemicals by coupling solar-driven water oxidation in the Z-scheme and CO₂ fixation in the Calvin cycle. In this study, formate dehydrogenase from Clostridium ljungdahlii (ClFDH) is interfaced with a TiO₂ -coated CuFeO₂ and CuO mixed (ClFDH-TiO₂ |CFO) electrode. In this biohybrid photocathode, the TiO₂ layer enhances the photoelectrochemical (PEC) stability of the labile CFO photocathode and facilitates the transfer of photoexcited electrons from the CFO to ClFDH. Furthermore, inspired by the natural photosynthetic scheme, the photobiocathode is combined with a water-oxidizing, FeOOH-coated BiVO₄ (FeOOH|BiVO₄ ) photoanode to assemble a wireless Z-scheme biocatalytic PEC device as a semi-artificial leaf. The leaf-like structure effects a bias-free biocatalytic CO₂ -to-formate conversion under visible light. Its rate of formate production is 2.45 times faster than that without ClFDH. This work is the first example of a wireless solar-driven semi-biological PEC system for CO₂ reduction that uses water as an electron feedstock.

"Waste to Wealth": Lignin as a Renewable Building Block for Energy Harvesting/Storage and Environmental Remediation

Lignin is the second most earth-abundant biopolymer having aromatic unit structures, but it has received less attention than other natural biomaterials. Recent advances in the development of lignin-based materials, such as mesoporous carbon, flexible thin films, and fiber matrix, have found their way into applications to photovoltaic devices, energy-storage systems, mechanical energy harvesters, and catalytic components. In this Review, we summarize and suggest another dimension of lignin valorization as a building block for the synthesis of functional materials in the fields of energy and environmental applications. We cover lignin-based materials in the photovoltaic and artificial photosynthesis for solar energy conversion applications. The most recent technological evolution in lignin-based triboelectric nanogenerators is summarized from its fundamental properties to practical implementations. Lignin-derived catalysts for solar-to-heat conversion and oxygen reduction are discussed. For energy-storage applications, we describe the utilization of lignin-based materials in lithium-ion rechargeable batteries and supercapacitors (e.g., electrodes, binders, and separators). We also summarize the use of lignin-based materials as heavy-metal adsorbents for environmental remediation. This Review paves the way to future potentials and opportunities of lignin as a renewable material for energy and environmental applications.

Theoretical study on CO2 reduction catalyzed by formate dehydrogenase using the cation radical of a bipyridinium salt with an ionic substituent as a co-enzyme

Mechanism for formate dehydrogenase from Candida boidinii catalyzed CO₂ reduction to formate with the cation radical of a 4,4′-bipyridinium salt with an ionic substituent as a co-enzyme was clarified by theoretical studies.

Artificial co-enzyme based on carbamoyl-modified viologen derivative cation radical for formate dehydrogenase in the catalytic CO2 reduction to formate

The interaction between the single-electron reduced carbamoyl-modified-4,4-bipyridinium salt and CbFDH in the CO₂ reduction to formate is elucidated by enzymatic kinetic analysis, the docking simulation and density functional theory calculation.

Trivalent metal ions promote the malic enzyme-catalyzed building of carbon–carbon bonds from CO2and pyruvate

ME is an attractive biocatalyst for building carbon–carbon bonds through carboxylation of pyruvate with CO₂. The carboxylation of pyruvate with CO₂was promoted by adding a trivalent metal ion. In particular, Al³⁺accelerates ME-catalyzed carboxylation of pyruvate with CO₂.

Visual distance readout to display the level of energy generation in paper-based biofuel cells: application to enzymatic sensing of glucose

Biofuel cells (BFCs) based on anodic oxidation and cathodic oxygen reduction represent an attractive alternative to self-powered devices. A glucose/oxygen BFC is described for monitoring glucose. It is making use of a piece of paper carrying a glucose oxidase (GOx) based bioanode, and a bilirubin oxidase (BilOx) based biocathode. The performance of the BFC is affected by the generation of H₂O₂, a byproduct of enzymatic glucose oxidation. Therefore, the removal of H₂O₂ is a crucial step in terms of BFC performance and stability. In addition, direct, unambiguous visual read-out is an ideal way to provide quantitative information. The colorimetric readout system described here is based on the consumption of undesired H₂O₂ and to convert the extent of energy generation into recognizable variations in color. As the H₂O₂ travels along the hydrophilic channel by capillary action, the formation of red gold nanoparticles from AuCl₄^- leads to the appearance of a red bar that provides distance-based information that can be read visually. The multiply readable information (maximum power density of BFC or visible distance) provides further choices for quantification. It also enhances reliability. The self-powered system based on the BFC exhibits excellent performance. Glucose can be determined by this method in the 1 to 50 mM concentration range. Graphical abstract Schematic presentation of a paper-supported biofuel cell equipped with a visual distance readout to display the level of energy generation in biofuel cells, and its application in sensing of glucose.

Unbiased biocatalytic solar-to-chemical conversion by FeOOH/BiVO4/perovskite tandem structure

Redox enzymes catalyze fascinating chemical reactions with excellent regio- and stereo-specificity. Nicotinamide adenine dinucleotide cofactor is essential in numerous redox biocatalytic reactions and needs to be regenerated because it is consumed as an equivalent during the enzymatic turnover. Here we report on unbiased photoelectrochemical tandem assembly of a photoanode (FeOOH/BiVO4) and a perovskite photovoltaic to provide sufficient potential for cofactor-dependent biocatalytic reactions. We obtain a high faradaic efficiency of 96.2% and an initial conversion rate of 2.4 mM h-1 without an external applied bias for the photoelectrochemical enzymatic conversion of α-ketoglutarate to L-glutamate via L-glutamate dehydrogenase. In addition, we achieve a total turnover number and a turnover frequency of the enzyme of 108,800 and 6200 h-1, respectively, demonstrating that the tandem configuration facilitates redox biocatalysis using light as the only energy source.

Photobiocatalysis: Activating Redox Enzymes by Direct or Indirect Transfer of Photoinduced Electrons

Biocatalytic transformation has received increasing attention in the green synthesis of chemicals because of the diversity of enzymes, their high catalytic activities and specificities, and mild reaction conditions. The idea of solar energy utilization in chemical synthesis through the combination of photocatalysis and biocatalysis provides an opportunity to make the "green" process greener. Oxidoreductases catalyze redox transformation of substrates by exchanging electrons at the enzyme's active site, often with the aid of electron mediator(s) as a counterpart. Recent progress indicates that photoinduced electron transfer using organic (or inorganic) photosensitizers can activate a wide spectrum of redox enzymes to catalyze fuel-forming reactions (e.g., H₂ evolution, CO₂ reduction) and synthetically useful reductions (e.g., asymmetric reduction, oxygenation, hydroxylation, epoxidation, Baeyer-Villiger oxidation). This Review provides an overview of recent advances in light-driven activation of redox enzymes through direct or indirect transfer of photoinduced electrons.

Solar driven electrochromic photoelectrochemical fuel cells for simultaneous energy conversion, storage and self-powered sensing

One solar-driven electrochromic photoelectrochemical fuel cell (PFC) with highly efficient energy conversion and storage is easily constructed to achieve quantitative self-powered sensing. Layered bismuth oxyiodide-zinc oxide nanorod arrays (ZnO@BiOI NRA) with a core/shell p-n heterostructure are fabricated as the photoanode with electrochromic Prussian blue (PB) as the cathode. The core/shell p-n heterostructure for the ZnO@BiOI photoanode can effectively boost the photoelectrochemical (PEC) performance through the improvement of photon absorption and charge carrier separation. The optimal assembled PFC yields an open-circuit voltage (V_OC) of 0.48 V with the maximum power output density (P_max) as high as 155 μW cm^-2 upon illumination. Benefitting from the interactive color-changing behavior of PB, the cathode not only exhibits cathodic catalytic activity in the PFC but also serves as an electrochromic display for self-powered sensing. The as-constructed PFC possesses multiple readable signal output nanochannels through the maximum power output density (P_max) of the PFC or the color change of PB. Meanwhile, the dual-signal-output makes the as-constructed self-powered sensor highly available in various operations demands with the enhanced reliability. With the advantages of high efficiency of PFCs, unique assay ability, and broad environmental suitability, the constructed self-powered platform shows broad application prospects as an integrated smart analytical device.

The effect of the functional ionic group of the viologen derivative on visible-light driven CO2 reduction to formic acid with the system consisting of water-soluble zinc porphyrin and formate dehydrogenase

The effect of the functional ionic group of 4,4′-bipyridinium salt on the visible-light driven CO₂ conversion to formic acid with the system consisting of zinc porphyrin and formate dehydrogenase was investigated.