Light-Harvesting Organic Nanocrystals Capable of Photon Upconversion

Multiple Force-Triggered Downconverted and Upconverted Emission in Polymers Containing Diels-Alder Adducts

Fluorescent mechanophores can indicate the deformation or damage in polymers. The development of mechanophores with multi-triggered response is of great interest. Herein, Diels-Alder (DA) adducts are incorporated into linear poly(methyl acrylate) PMA-BA and network poly(hexyl methacrylate) (PHMA) as mechanophores to detect the stress caused by ultrasound, freezing, and compression. The DA mechanophores undergo retro-DA reaction to release 9-styrylanthracene chromophore upon applying force, resulting in cyan fluorescence. The dissociation ratio of the DA mechanophore after pulsed ultrasonication of PMA-BA solution for 240 minutes is estimated to be 52 % by absorption spectra and 1H NMR. Additionally, the rate constant of mechanical cleavage is calculated to be 1.2×10-4 min-1⋅kDa-1 with the decrease in molecular weight from 69 to 22 kDa measured by gel permeation chromatography. Freezing of PHMA gels as well as compression of PHMA bulk samples turn-on the DA mechanophores, revealing the microscale fracture. Photon upconversion responses toward various force stimuli are also achieved in both polymer solutions and bulk samples by doping platinum octaethylporphyrin (PtOEP) or palladium meso-tetraphenyltetrabenzoporphyrin (PdTPTBP) sensitizers with multiple excitation wavelengths.

Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic-organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet-triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic-inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications.

Self-assembled supramolecular artificial light-harvesting nanosystems: construction, modulation, and applications

Artificial light-harvesting systems, an elegant way to capture, transfer and utilize solar energy, have attracted great attention in recent years. As the primary step of natural photosynthesis, the principle of light-harvesting systems has been intensively investigated, which is further employed for artificial construction of such systems. Supramolecular self-assembly is one of the feasible methods for building artificial light-harvesting systems, which also offers an advantageous pathway for improving light-harvesting efficiency. Many artificial light-harvesting systems based on supramolecular self-assembly have been successfully constructed at the nanoscale with extremely high donor/acceptor ratios, energy transfer efficiency and the antenna effect, which manifests that self-assembled supramolecular nanosystems are indeed a viable way for constructing efficient light-harvesting systems. Non-covalent interactions of supramolecular self-assembly provide diverse approaches to improve the efficiency of artificial light-harvesting systems. In this review, we summarize the recent advances in artificial light-harvesting systems based on self-assembled supramolecular nanosystems. The construction, modulation, and applications of self-assembled supramolecular light-harvesting systems are presented, and the corresponding mechanisms, research prospects and challenges are also briefly highlighted and discussed.

AIEgens in Solar Energy Utilization: Advances and Opportunities

Solar energy is the most abundant energy resource on earth. Unfortunately, only a very small portion of the solar radiation can be utilized by current light-harvesting materials, thus leading to the poor utilization efficiency of solar energy. In this regard, aggregation-induced emission luminogens (AIEgens) have demonstrated versatile properties that can enhance energy conversion and potentially revolutionize solar utilization systems. AIEgens with great processability can selectively absorb radiation across multiple spectral regions and transform solar energy into longer-wavelength light, heat, or alternative forms of energy. These processes can considerably enhance the solar energy utilization performance by either developing light-harvesting systems based on AIEgens or hybridizing modern light-harvesting systems with AIE technology. In this Perspective, based on material properties, we highlight different functions of AIEgens related to solar light utilization, including sunlight transformation, chemical conversion, and thermal conversion.

Coupling Red-to-blue Upconversion Organic Microcrystals with Cd0.5 Zn0.5 S for Efficient and Durable Photocatalytic Hydrogen Production

For semiconductor photocatalysts with excellent performance in solar H₂ production, broadening the utilization of solar irradiation is highly necessary to further improve the solar conversion efficiency. Herein, we combined a Cd_0.5 Zn_0.5 S photocatalyst with DPA/PdTPTBP microcrystals capable of red-to-blue photon upconversion, realizing substantial performance enhancement and an apparent quantum yield of 0.16% for H₂ production driven by sub-bandgap photons (600∼650 nm). Meanwhile, this system could smoothly work with H₂ production rate of 1.40 mmol g^-1  h^-1 for as long as 40 hours under 200 mW/cm² irradiation with only 3% attenuation of photocatalytic activity. Moreover, the O₂ -barrier property of DPA/PdTPTBP microcrystals assures that photocatalytic H₂ production remains effective in the presence of 10% O₂ by volume, which offers an opportunity for the photocatalytic application in O₂ -enriched environments. The combination of O₂ -resistant upconversion microcrystals and semiconductor catalysts is the most successful solution for the construction of TTA-UC-based photocatalytic H₂ production system so far. The present study provides a clear guideline for designing new TTA-UC-based photocatalytic systems.

Application of Triplet-Triplet Annihilation Upconversion in Organic Optoelectronic Devices: Advances and Perspectives

Organic semiconductor materials have been widely used in various optoelectronic devices due to their rich optical and/or electrical properties, which are highly related to their excited states. Therefore, how to manage and utilize the excited states in organic semiconductors is essential for the realization of high-performance optoelectronic devices. Triplet-triplet annihilation (TTA) upconversion is a unique process of converting two non-emissive triplet excitons to one singlet exciton with higher energy. Efficient optical-to-electrical devices can be realized by harvesting sub-bandgap photons through TTA-based upconversion. In electrical-to-optical devices, triplets generated after the combination of electrons and holes also can be efficiently utilized via TTA, which resulted in a high internal conversion efficiency of 62.5%. Currently, many interesting explorations and significant advances have been demonstrated in these fields. In this review, a comprehensive summary of these intriguing advances on developing efficient TTA upconversion materials and their application in optoelectronic devices is systematically given along with some discussions. Finally, the key challenges and perspectives of TTA upconversion systems for further improvement for optoelectronic devices and other related research directions are provided. This review hopes to provide valuable guidelines for future related research and advancement in organic optoelectronics.

Funneling and Enhancing Upconversion Emission by Light-Harvesting Molecular Wires

Triplet-triplet annihilation (TTA) upconversion has shown promising potentials in the augmentation of solar energy conversion. However, challenging issues exist in improving TTA upconversion efficiencies in solid-states, one of which is the back energy transfer from upconverted singlet annihilators to sensitizers, resulting in decreasing upconversion emission. Here we present a light-harvesting molecular wire consisting of dendrons with 9,10-diphenylanthracene derivatives (DPAEH) at the periphery and p-phenylene ethynylene oligomers (PPE) as the wire core. The peripheral DPAEH antenna funnels singlet excitonic energy to the wire on a 12 ps time scale. Incorporating the molecular wire into the TTA upconversion solid consisting of the DPAEH annihilator and the porphyrin sensitizer evidently improves the upconversion quantum yield from 1.5% to 2.7% upon 532 nm excitation by suppressing the back energy transfer from the singlet annihilator to the sensitizer. This finding offers a potential route to use a singlet energy light-harvesting architecture for enhancing TTA upconversion.

Aggregation induced emission in one easy step: pyridinium AIEgens and counter ion effect

Protonation of pyridines with a strong acid is a general and straightforward approach to achieve efficient aggregation induced emission (AIE) in structurally remarkably simple organic molecules that lack any of the conventional luminophores. The relationship between the nature of counter ion and the AIE efficiency is demonstrated. The superiority of the perchlorate counter ion is attributed to efficient stabilization of the key intermolecular π+-π interactions between neighboring luminophore molecules in the crystal lattice.

Triplet fusion upconversion using sterically protected 9,10-diphenylanthracene as the emitter

Improving the efficiency of triplet fusion upconversion (TF-UC) in the solid-state is still challenging due to the aggregation and phase separation of chromophores. In this work, two 9,10-diphenylanthracene (DPA) derivatives based on the modification of the 9,10-phenyl rings with bulky isopropyl groups (bDPA-1 and bDPA-2) were used as emitters. By using platinum octaethylporphyrin (PtOEP) as the sensitizer, TF-UC performance was comprehensively investigated in 3 media: toluene solution, polyurethane thin film and nano/micro-crystals in a polyvinyl alcohol matrix. Only a small difference in upconversion efficiency between the bulky DPAs and the DPA reference was observed in toluene solution and polyurethane thin film. However, a large improvement of TF-UC quantum yield was achieved in bDPA-2/PtOEP crystals (ΦUC = (0.92 ± 0.05)%) with a low excitation intensity threshold (52 mW cm-2) compared to that of DPA/PtOEP crystals (ΦUC = (0.09 ± 0.03)%). This difference was largely attributed to improved dispersibility of the PtOEP sensitizer in the bDPA-2 emitter crystals. The bulky DPAs also show excellent stability under UV irradiation with exposure to oxygen compared to DPA. These results provide a strategy for developing efficient solid-state TF-UC systems based on nano/micro-particles of emitter-sensitizer mixtures.

Thermally Activated Delayed Fluorescence via Triplet Fusion

Manipulating triplet states is technically intriguing for organic semiconductors and photochemical conversion. Sensitized photon upconversion that converts low-energy photons into higher-energy ones via triplet fusion holds great potential in augmentation of photovoltaic devices and photocatalysis. Conventional requirement of exothermic triplet-triplet energy transfer in sensitized upconversion constrains the development of upconversion donor-acceptor pairs. We demonstrate an upconversion system by utilizing a triplet energy-deficient donor within a triplet acceptor matrix, in which efficient thermally activated triplet-triplet energy transfer overcoming an energy barrier of up to 180 meV and an over 5% upconversion quantum yield in the solid state are achieved upon 635 nm irradiation at 195 mW/cm². The effective solid-state upconversion through thermally activated triplet-triplet energy transfer establishes a new pathway to extract triplet energy from low-lying sensitizers, transcending traditional restriction in matching components energy level.

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low-Power Photon Upconversion by Triplet Fusion

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength-shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid-state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures. These emitting porous aromatic framework (ePAF) nanoparticles allow intimate interaction with the included metallo-porphyrin as triplet sensitizers. Remarkably, the high concentration of framed chromophores ensures hopping-mediated triplet diffusion required for TTA, yet the low density of the framework promotes their high optical features without quenching effects, typical of the solid state. A green-to-blue photon upconversion yield as high as 15% is achieved: a record performance among annihilators in a condensed phase. Furthermore, the engineered ePAF architecture containing covalently linked sensitizers produces full-fledge solid-state bicomponent particles that behave as autonomous nanodevices.

Solid-State, Near-Infrared to Visible Photon Upconversion via Triplet-Triplet Annihilation of a Binary System Fabricated by Solution Casting

Herein, triplet-triplet annihilation upconversion (TTA-UC) from near-infrared (NIR, 785 nm) to visible (yellow, centered at 570 nm) regions has been demonstrated in the binary solid of condensed chromophores. Microparticles of the binary solid comprising rubrene as a matrix (emitter) and π-extended Pd-porphyrin as a dopant (sensitizer) in a mole ratio of 1000:1 were obtained by solution casting. Excitation intensity dependence and quantum yield (QY) of the upconverted emission were characterized for individual particles under a microscope and revealed a low threshold intensity (∼100 mW/cm²) as compared to the solution and moderate UC-QY (∼0.5%) in the NIR range. The factors contributing to the UC-QY were investigated by time-resolved and steady-state spectroscopies. It was found that the intersystem crossing of the sensitizer, triplet energy transfer, and TTA occurred efficiently in the binary solid, and the fluorescence QY of the emitter governed the UC-QY.

Preparation and application of solid-state upconversion materials based on sodium polyacrylate

By loading a microemulsion containing both sensitizer and emitter into porous sodium polyacrylate (PAAS), a water-absorbent resin (WAR) upconversion (UC) material was fabricated for photocatalysis applications. This WAR UC material showed a highly efficient UC process in the ambient environment owing to its liquid/solid encapsulation structure. In the application measurement, the UC emission from WAR UC materials can excite the catalyst Pt/WO3 to produce hydroxyl radicals, yielding 7-hydroxycoumarin by reacting with coumarin. In another case, since the band gap of ZnCdS matches the energy of UC emission, hole-electron pairs can be obtained under the UC irradiation and capture electrons from rhodamine B, leading to the degradation of rhodamine B. The maximum of the photocatalysis efficiency can be up to 97%. This work solves the oxygen quenching problem by preparing a triplet-triplet annihilation upconversion (TTA-UC) O/W microemulsion and loading it into PAAS WAR, and opens a new avenue to solid-state devices for TTA-UC. The applications of photocatalytic synthesis and photocatalytic degradation lay a foundation for future practical applications for TTA-UC materials.

Tetraphenylethene 9,10-Diphenylanthracene Derivatives - Synthesis and Photophysical Properties

A series of tetraphenylethene 9,10-diphenylanthracene (TPE-DPA) derivatives have been synthesized, and their photophysical properties studied. Photoluminescence measurements in PMMA, neat films and nanoparticle dispersions reveal that different aggregation states are formed, which leads to different photophysical behavior. The triplet excited state properties were studied using Pt(II) octaethylporphyrin (PtOEP) as triplet sensitizer. Upconverted emission from the DPA moiety is observed in nanoparticle dispersions of each derivative. A higher upconverted emission intensity is observed in aerated (compared to deaerated) solutions of the derivatives following irradiation, which is attributed to oxidation of the TPE moiety. These results provide valuable insight for the design of AIE luminogens for triplet-triplet annihilation upconversion (TTA-UC).

Cation–π interactions secure aggregation induced emission of planar organic luminophores

The use of non-covalent intermolecular π⁺–π interactions between quaternary pyridinium or imidazolium cations and aromatic π systems is an efficient approach to achieve AIE in planar purely organic luminophores.