Impact of Flue Gas Compounds on Microalgae and Mechanisms for Carbon Assimilation and Utilization

Microalgae are not an umbrella solution for power industry waste abatement but could play a role in their valorization

Microalgae have long been regarded as a promising solution for biological carbon abatement from the power industry, offering renewable biomass without competing for land or water resources used for food crops. In this study, we extensively examined the application of photosynthetic microorganisms for closing carbon, nitrogen, and micronutrient loops in the power industry. Subsequently, we explored the bottom-up integration of algal biorefineries into power industry waste streams for increased economic benefits and reduced environmental impacts. Analysis of the available data indicated that microalgae integration with the power industry is primarily performed using flue-gas-assisted cultivation. This approach allows for carbon sequestration typically below one gram per liter per day, too low to significantly impact carbon abatement at achievable scales of microalgae cultivation. Alternative approaches are also being explored. For example, soluble bicarbonate platforms allow for higher biomass productivity and temporary carbon storage. Meanwhile, the use of ashes and waste heat and thermophilic strains can result in lower cultivation costs and better control of cultivation conditions. These approaches offer further incremental improvement to microalgae-based carbon abatement systems in the power industry but are unlikely to be an umbrella solution for carbon reduction. Consequently, in the near term, microalgae-based carbon valorization systems are likely to be limited to niche applications involving the synthesis of high-value products. For microalgae to truly transform carbon abatement processes radical improvements in both biology and engineering approaches are urgently needed.

Nuclear mutagenesis and adaptive evolution improved photoautotrophic growth of Euglena gracilis with flue-gas CO2 fixation

To effectively improve biomass growth and flue-gas CO2 fixation of microalgae, acid-tolerant Euglena gracilis was modified with cobalt-60 γ-ray irradiation and polyethylene glycol (PEG) adaptive screening to obtain the mutant strain M800. The biomass dry weight and maximum CO2 fixation rate of M800 were both 1.47 times higher than that of wild strain, which was attributed to a substantial increase in key carbon fixation enzyme RuBisCO activity and photosynthetic pigment content. The high charge separation quantum efficiency in PSII reaction center, efficient light utilization and energy regulation that favors light conversion, were the underlying drivers of efficient photosynthetic carbon fixation in M800. M800 had stronger antioxidant capacity in sufficient high-carbon environment, alleviating lipid peroxidation damage. After adding 1 mM PEG, biomass dry weight of M800 reached 2.31 g/L, which was 79.1 % higher than that of wild strain. Cell proliferation of M800 was promoted, the apoptosis and necrosis rates decreased.

Economic co-production of cellulosic ethanol and microalgal biomass through efficient fixation of fermentation carbon dioxide

An integrated process for the co-production of cellulosic ethanol and microalgal biomass by fixing CO2 generated from bioethanol fermentation is proposed. Specifically, over one-fifth of the fermentative carbon was converted into high-purity CO2 during ethanol production. The optimal concentration of 4 % CO2 was identified for the growth and metabolism of Chlorella sp. BWY-1. A multiple short-term intermittent CO2 supply system was established to efficiently fix and recycle the waste CO2. Using this system, economical co-production of cellulosic ethanol by Zymomonas mobilis and microalgal biomass in biogas slurry wastewater was achieved, resulting in the production of ethanol at a rate of 0.4 g/L/h and a fixed fermentation CO2 of 3.1 g/L/d. Moreover, the amounts of algal biomass and chlorophyll a increased by over 50 % and two-fold, respectively. Through techno-economic analysis, the integrated process demonstrated its cost-effectiveness for cellulosic ethanol production. This study presents an innovative approach to a low-carbon circular bioeconomy.

Development of dual strain microalgae cultivation system for the direct carbon dioxide utilization of power plant flue gas

This study aims to propose a biological system that allows for direct utilization of flue gas for carbon dioxide capture and utilization by microalgae. The strain Chlorella sp. ABC-001 is employed for its high growth rate as well as lipid and carbohydrate content. Toxicity tests showed that cell growth was unaffected by NO, but the presence of SO2 showed critical damage on cell growth. Hence, an extremophile alga, Galdieria sulphuraria 5587.1 was applied to build a dual-strain cultivation system to mitigate the effect of SO2 toxicity and increase CO2 capture efficiency. All SO2 was removed by Galdieria culture and the system exhibited stable growth from a simulated flue gas stream containing CO2, NO and SO2. Combined CO2 biofixation rate of 793 mg/L/d and lipid productivity of 113 mg/L/d was achieved. The results showed that this new cultivation system is a promising alternative for reducing CO2 emissions from power plants.

Cytoprotective Metal-Phenolic Network Sporulation to Modulate Microalgal Mobility and Division

Synthetic cell exoskeletons created from abiotic materials have attracted interest in materials science and biotechnology, as they can regulate cell behavior and create new functionalities. Here, a facile strategy is reported to mimic microalgal sporulation with on-demand germination and locomotion via responsive metal-phenolic networks (MPNs). Specifically, MPNs with tunable thickness and composition are deposited on the surface of microalgae cells via one-step coordination, without any loss of cell viability or intrinsic cell photosynthetic properties. The MPN coating keeps the cells in a dormant state, but can be disassembled on-demand in response to environmental pH or chemical stimulus, thereby reviving the microalgae within 1 min. Moreover, the artificial sporulation of microalgae resulted in resistance to environmental stresses (e.g., metal ions and antibiotics) akin to the function of natural sporulation. This strategy can regulate the life cycle of complex cells, providing a synthetic strategy for designing hybrid microorganisms.

Effects of phytohormone on Chlorella vulgaris grown in wastewater-flue gas: C/N/S fixation, wastewater treatment and metabolome analysis

Chlorella vulgaris (C. vulgaris) can provide the means to fix CO2 from complicated flue gas, treat wastewater and reach a sustainable production of petrochemical substitutes simultaneously. However, a prerequisite to achieving this goal is to promote C. vulgaris growth and improve the CO2-to-fatty acids conversion efficiency under different conditions of flue gas and wastewater. Thus, the addition of indole-3-acetic acid (IAA) in C. vulgaris cultivation was proposed. Results showed that C. vulgaris were more easily inhibited by 100 ppm NO and 200 ppm SO2 under low nitrogen (N) condition. NO and SO2 decreased the carbon (C) fixation; but increased N and sulfur (S) fixation. IAA adjusted the content of superoxide dismutase (SOD) and malondialdehyde (MDA), improved the expression of psbA, rbcL, and accD, attenuated the toxicity of NO and SO2 on C. vulgaris, and ultimately improved cell growth (2014.64-2458.16 mgdw·L-1) and restored CO2 fixation rate (170.98-220.92 mg CO2·L-1·d-1). Moreover, wastewater was found to have a high treatment efficiency because C. vulgaris grew well in all treatments, and the maximal removal rates of both N and phosphorus (P) reached 100%. Metabonomic analysis showed that IAA, "NO and SO2" were involved in the down-regulated and up-regulated expression of multiple metabolites, such as fatty acids, amino acids, and carbohydrates. IAA was beneficial for improving lipid accumulation with 24584.21-27634.23 μg g-1, especially monounsaturated fatty acids (MUFAs) dominated by 16-18 C fatty acids, in C. vulgaris cells. It was concluded that IAA enhanced the CO2 fixation, fatty acids production of C. vulgaris and its nutrients removal rate.

Microalgal and Nitrogen-Fixing Bacterial Consortia: From Interaction to Biotechnological Potential

Microalgae are used in various biotechnological processes, such as biofuel production due to their high biomass yields, agriculture as biofertilizers, production of high-value-added products, decontamination of wastewater, or as biological models for carbon sequestration. The number of these biotechnological applications is increasing, and as such, any advances that contribute to reducing costs and increasing economic profitability can have a significant impact. Nitrogen fixing organisms, often called diazotroph, also have great biotechnological potential, mainly in agriculture as an alternative to chemical fertilizers. Microbial consortia typically perform more complex tasks than monocultures and can execute functions that are challenging or even impossible for individual strains or species. Interestingly, microalgae and diazotrophic organisms are capable to embrace different types of symbiotic associations. Certain corals and lichens exhibit this symbiotic relationship in nature, which enhances their fitness. However, this relationship can also be artificially created in laboratory conditions with the objective of enhancing some of the biotechnological processes that each organism carries out independently. As a result, the utilization of microalgae and diazotrophic organisms in consortia is garnering significant interest as a potential alternative for reducing production costs and increasing yields of microalgae biomass, as well as for producing derived products and serving biotechnological purposes. This review makes an effort to examine the associations of microalgae and diazotrophic organisms, with the aim of highlighting the potential of these associations in improving various biotechnological processes.

CO2 gradient domestication improved high-concentration CO2 tolerance and photoautotrophic growth of Euglena gracilis

In order to improve CO₂ biofixation efficiency of microalgae cultivated with coal-chemical flue gas, CO₂ gradient domestication was employed to improve high-concentration CO₂ tolerance and photoautotrophic growth of acid-tolerant Euglena gracilis. The dried biomass yield of photoautotrophic growth of E.gracilis increased from 1.09 g/L (wild-type strain) by 21 % to 1.32 g/L with CO₂ gradient domestication to 15 % CO₂. The RuBisCO activity and biomass production of E.gracilis strain domesticated to 99 % CO₂ were 2.63 and 3.4 times higher, respectively, than those of wild-type strain. The chlorophyll a and b contents were 2.52 and 1.79 times higher, respectively, than those of wild-type strain. Superoxide dismutase and catalase activities of 99 % CO₂-domesticated strain increased to 1.24 and 6 times, which reduced peroxide damage under high carbon stress and resulted in lower apoptotic and necrotic rates of domesticated strain. Thus, this work provides valuable guidance for CO₂ fixation and adaptive evolution of E. gracilis in industrial flue gas.

Realizing algae value chains in arid environments: an Arabian Peninsula perspective

Algae are a promising feedstock for the sustainable production of feed, fuels, and chemicals. Especially in arid regions such as the Arabian Peninsula, algae could play a significant role in enhancing food security, economic diversification, and decarbonization. Within this context, the regional potential of algae commercialization is discussed, exploring opportunities and challenges across technical, societal, and political aspects. Climate, availability of process inputs, and funding opportunities are identified as essential strengths that increase the global competitiveness of regional algae production. Implementation challenges include climate change, securing human resources, and the vital transitioning from research to commercial scales. With balanced management, however, the region's efforts could be the push that is necessary for algal technologies to take off globally.

Overview of recent progress in exogenous hydrogen supply biogas upgrading and future perspective

With the rapid development of renewable and sustainable energy, biogas upgrading for producing high-quality biomethane as an alternative to natural gas has attracted worldwide attention. This paper comprehensively reviews the current state of biogas upgrading technologies. The advances in physicochemical, photosynthetic autotrophic, and chemical autotrophic biogas upgrading technologies are briefly described with particular attention to the key challenges. New chemical autotrophic biogas upgrading strategies, such as direct and indirect exogenous hydrogen supply, for overcoming barriers to biogas upgrading and realizing highly efficient bioconversion of carbon dioxide are summarized. For each approach to exogenous hydrogen supply for biogas upgrading, the key findings and technical limitations are summarized and critically analyzed. Finally, future developments are also discussed to provide a reference for the development of biogas upgrading technology that can address the global energy crisis and climate change issues related to the application of biogas.

Microalgae-driven swine wastewater biotreatment: Nutrient recovery, key microbial community and current challenges

As a promising technology, the microalgae-driven strategy can achieve environmentally sustainable and economically viable swine wastewater treatment. Currently, most microalgae-based research focuses on remediation improvement and biomass accumulation, while information on the removal mechanisms and dominant microorganisms is emerging but still limited. In this review, the major removal mechanisms of pollutants and pathogenic bacteria are systematically discussed. In addition, the bacterial and microalgal community during the swine wastewater treatment process are summarized. In general, Blastomonas, Flavobacterium, Skermanella, Calothrix and Sedimentibacter exhibit a high relative abundance. In contrast to the bacterial community, the microalgal community does not change much during swine wastewater treatment. Additionally, the effects of various parameters (characteristics of swine wastewater and cultivation conditions) on microalgal growth and current challenges in the microalgae-driven biotreatment process are comprehensively introduced. This review stresses the need to integrate bacterial and microalgal ecology information into the conventional design of full-scale swine wastewater treatment systems and operations. Herein, future research needs are also proposed, which will facilitate the development and operation of a more efficient microalgae-based swine wastewater treatment process.

Mass transfer characteristics and effect of flue gas used in microalgae culture

Flue gas not only contains carbon dioxide (CO₂) but also air pollutants (sulfur oxides (SO_x) and nitrogen oxides (NO_x)). The effective utilization of flue gas could help us to reduce the cost of microalgal biomass production. This study assessed and explored the utilization of flue gas for the absorption characteristics of different components and their biological effect in microalgal culture systems. In abiotic absorption experiments, the absorptivity of CO₂ was reduced by a maximum of 3.1%, and the concentration of the available carbon source in the culture medium was decreased by 6.7% when sulfur dioxide (SO₂, at 100 mg/m³) was presented in the flue gas. Meanwhile, the presence of oxygen (O₂, at 4%) in the flue gas improved the absorptivity of nitric oxide (NO). When Scenedesmus dimorphus was cultured using bisulfites and nitrites (at 10 mmol/L and 8 mmol/L, respectively) as the sulfur and nitrogen sources, SO_x and NO_x in the flue gas did not significantly affect growth of microalgal cells and the carbohydrate, lipid, and protein content. The consumption rates of nutrient elements were calculated, which could provide an adjustment strategy for the initial gas source when culturing microalgae with the flue gas. This study indicates that the flue gas used for microalgal culture should be partially desulfurized, so that the SO_x and CO₂ concentrations can optimize growth of microalgal cells, while the denitrification might not be needed since the flue gas can be oxidized to utilize the NO. KEY POINTS: • The concentration of the available carbon source in the culture medium was decreased when SO₂ was presented in the flue gas, and the presence of O₂ in the flue gas improved the absorptivity of NO. • An adjustment strategy for the initial gas source when culturing microalgae with the flue gas was firstly proposed. • For flue gas containing 10% CO₂ and 60 mg/m³ of SO₂, growth of Scenedesmus dimorphus showed no difference in cell growth in normal culture conditions.

Microalgae potential in the capture of CO2 emission

In a perspective projected to reduce the atmospheric concentration of greenhouse gases, in which carbon dioxide is the master, the use of microalgae is an effective and decisive response. The review describes the bio circularity of the process of abatement of carbon dioxide through biofixation in algal biomass, highlighting the potential of its reuse in the production of high value-added products.

Role of Microalgae in Global CO2 Sequestration: Physiological Mechanism, Recent Development, Challenges, and Future Prospective

The rising concentration of global atmospheric carbon dioxide (CO2) has severely affected our planet’s homeostasis. Efforts are being made worldwide to curb carbon dioxide emissions, but there is still no strategy or technology available to date that is widely accepted. Two basic strategies are employed for reducing CO2 emissions, viz. (i) a decrease in fossil fuel use, and increased use of renewable energy sources; and (ii) carbon sequestration by various biological, chemical, or physical methods. This review has explored microalgae’s role in carbon sequestration, the physiological apparatus, with special emphasis on the carbon concentration mechanism (CCM). A CCM is a specialized mechanism of microalgae. In this process, a sub-cellular organelle known as pyrenoid, containing a high concentration of Ribulose-1,5-bisphosphate carboxylase-oxygenase (Rubisco), helps in the fixation of CO2. One type of carbon concentration mechanism in Chlamydomonas reinhardtii and the association of pyrenoid tubules with thylakoids membrane is represented through a typical graphical model. Various environmental factors influencing carbon sequestration in microalgae and associated techno-economic challenges are analyzed critically.

Process Engineering Aspects for the Microbial Conversion of C1 Gases

Industrially applied bioprocesses for the reduction of C1 gases (CO₂ and/or CO) are based in particular on (syn)gas fermentation with acetogenic bacteria and on photobioprocesses with microalgae. In each case, process engineering characteristics of the autotrophic microorganisms are specified and process engineering aspects for improving gas and electron supply are summarized before suitable bioreactor configurations are discussed for the production of organic products under given economic constraints. Additionally, requirements for the purity of C1 gases are summarized briefly. Finally, similarities and differences in microbial CO₂ valorization are depicted comparing gas fermentations with acetogenic bacteria and photobioprocesses with microalgae.

Metabolic pathways of Chlorella sp. cells induced by exogenous spermidine against nitric oxide damage from coal-fired flue gas

To protect microalgae that are used for photosynthetic CO₂ fixation against high NO concentrations from coal-fired flue gas, 500 μM exogenous spermidine was added into Chlorella sp. solution resulting in an elevation of biomass yield by 30.5% under 327 ppm NO. Metabolomics, proteomics and enzyme activities were analyzed, revealing three effects of spermidine on Chlorella sp. resistance to NO stress. First, spermidine induced NO fixation in amino acids and their metabolites, mainly in form of 5-oxoproline (1.51-fold), which occurred through intracellular conversion reactions between citrulline and arginine. Accordingly, cellular respiration was strengthened along with a weakened NO inhibition, which enhanced active transport with ATP consumption. Second, spermidine guarded Chlorella sp. against peroxidation damage by improving activity of antioxidant enzymes. Finally, it protected the photosynthetic system of Chlorella sp. by increasing abundance of related enzymes to enhance carbon fixation. Thus exogenous spermidine improved biomass production against NO environment.

Capture and Reuse of Carbon Dioxide (CO2) for a Plastics Circular Economy: A Review

Plastic production has been increasing at enormous rates. Particularly, the socioenvironmental problems resulting from the linear economy model have been widely discussed, especially regarding plastic pieces intended for single use and disposed improperly in the environment. Nonetheless, greenhouse gas emissions caused by inappropriate disposal or recycling and by the many production stages have not been discussed thoroughly. Regarding the manufacturing processes, carbon dioxide is produced mainly through heating of process streams and intrinsic chemical transformations, explaining why first-generation petrochemical industries are among the top five most greenhouse gas (GHG)-polluting businesses. Consequently, the plastics market must pursue full integration with the circular economy approach, promoting the simultaneous recycling of plastic wastes and sequestration and reuse of CO2 through carbon capture and utilization (CCU) strategies, which can be employed for the manufacture of olefins (among other process streams) and reduction of fossil-fuel demands and environmental impacts. Considering the previous remarks, the present manuscript’s purpose is to provide a review regarding CO2 emissions, capture, and utilization in the plastics industry. A detailed bibliometric review of both the scientific and the patent literature available is presented, including the description of key players and critical discussions and suggestions about the main technologies. As shown throughout the text, the number of documents has grown steadily, illustrating the increasing importance of CCU strategies in the field of plastics manufacture.

Revisiting carbon, nitrogen, and phosphorus metabolisms in microalgae for wastewater treatment

Threats posed to humans - including environmental pollution, water scarcity, food shortages, and resource crises drive a new concept to think about wastewater and its treatment. Wastewater is not only a waste but also a source of energy, renewable and/or non-renewable resources, including water itself. The nutrient in wastewater should not only be removed but also need to be upcycled. Microalgae based wastewater treatment has attracted considerable interests because algae have the potential to efficiently redirect nutrients from wastewater to the accumulated algal biomass. Additionally, microalgae are commercialized in human consumption and animal feed owing to their high content of essential amino and fatty acids, vitamins, and pigments. The whole process establishes a circular economy, totally relying on the ability of microalgae to uptake and store nutrients in wastewater, such as carbon (C), nitrogen (N), and phosphorus (P). It makes the study of the mechanisms underlying the uptake and storage of nutrients in microalgae of great interest. This review specifically aims to summarize C, N, and P metabolisms in microalgae for a better understanding of the microalgae-based wastewater treatment from the nutrient uptake pathway, and examine the key physiological factors or the operating conditions related to nutrient metabolisms that may affect the treatment efficiency. At last, I discuss the potential approaches to enhance the overall treatment performance by adjusting the critical parameters for C, N, and P metabolisms.

Investigating algae for CO2 capture and accumulation and simultaneous production of biomass for biodiesel production

Carbon capture and sequestration technologies are used to reduce carbon emissions. Membranes, solvents, and adsorbents are the three major methods of CO₂ capture. One of the promising methods is the use of algae to absorb CO₂ from flue gases and convert it into biomass. Algae have great potential as renewable fuel sources and CO₂ capture using photosynthesis for carbon fixation has also attracted much attention. This paper presents an extensive and in-depth report on the utilization of algae for carbon capture and accumulation. This is done in conjunction with cultivating the algae for the production of biomass for biodiesel production. Different systems are investigated for algae cultivation as well as carbon capture to effectively mitigate carbon emissions. The performance and productivity of these biosystems depend on various conditions including algae type, light sources, nutrients, pH, temperature, and mass transfer. Macroalgae and microalgae species were explored to determine their suitability for carbon capture and sequestration, along with the production of biodiesel. The steps for producing biodiesel were comprehensively reviewed, which are harvesting, dehydrating, oil extraction, oil refining, and transesterification. This technology combines active carbon capture with the potential of biodiesel production.

Technical insights into the production of green fuel from CO2 sequestered algal biomass: A conceptual review on green energy

Algae a promising energy reserve due to its adaptability, cheap source, sustainability and it's growth ability in wastewater with efficient sequestration of industrial carbon dioxide. This review summarizes the pathways available for biofuel production from carbon sequestered algae biomass. In this regard, this review focuses on microalgae and its cultivation in wastewater with CO₂ sequestration. Conversion of carbon sequestered biomass into bio-fuels via thermo-chemical routes and its engine emission properties. Energy perspective of green gaseous biofuels in near future. This review revealed that algae was the pre-dominant CO₂ sequester than terrestrial plants in an eco-friendly and economical way with simultaneous wastewater remediation. Hydrothermal liquefaction of algae biomass was the most preferred mode for biofuel generation than pyrolysis due to high moisture content. The algae based fuels exhibit less greenhouse gases emission and higher energy value. This review helps the researchers, environmentalists and industrialists to evaluate the impact of algae based bio-energy towards green energy and environment.

Using seawater-based Na2CO3 medium for scrubbing the CO2 released from Bio-CNG plant for enhanced biomass production of Pseudanabaena limnetica

The concentration of CO2, one of the most important greenhouse gases (GHG), has reached to 409.8 ± 0.1 ppm in 2019. Although there are many carbon capture and storage (CCS) methods, they are very costly and their long term use raises concern about environmental safety. Alternatively, bio-sequestration of CO2 using microalgal cell factories has emerged as a promising way of recycling CO2 into biomass via photosynthesis. In the present study, Indigenous algal strain Pseudanabaena limnetica was cultivated in pneumatically agitated 60-L flat-panel photobioreactor system. The gas was released from Bio-CNG plant as by-product into Na2CO3-rich medium and cultivated in semicontinuous mode of operation. It was observed that when CO2 was sparged in seawater-based 0.02 M Na2CO3 solution, maximum CO2 was dissolved in the system and was used for algal cultivation. Control system produced 0.64 ± 0.035 g/L of biomass at the end of 15 days, whereas CO2 sparged Na2CO3 medium produced 0.81 ± 0.046 g/L of biomass. When CO2 from Bio-CNG station was fed, it resulted in biomass production of 1.62 ± 0.070 g/L at the end of 18 days compared to 1.46 ± 0.066 g/L of biomass produced in control system which was not fed with gas released from Bio-CNG plant as by-product. Thus, feeding CO2 directly into Na2CO3 medium and operating the system semicontinuously would be efficient for scrubbing CO2 from commercial Bio-CNG plant. This study proves that feeding CO2 gas from Bio-CNG plant into Na2CO3-rich alkaline system can be used to feed algae for enhanced biomass production.

Critical processes and variables in microalgae biomass production coupled with bioremediation of nutrients and CO2 from livestock farms: A review

Development of renewable and clean energy as well as bio-based fine chemicals technologies are the keys to overcome the problems such as fossil depletion, global warming, and environment pollution. To date, cultivation of microalgae using wastewater is regarded as a promising approach for simultaneous nutrients bioremediation and biofuels production due to their high photosynthesis efficiency and environmental benefits. However, the efficiency of nutrients removal and biomass production strongly depends on wastewater properties and microalgae species. Moreover, the high production cost is still the largest limitation to the commercialization of microalgae biofuels. In this review paper, the state-of-the-art algae species employed in livestock farm wastes have been summarized. Further, microalgae cultivation systems and impact factors in livestock wastewater to microalgae growth have been thoroughly discussed. In addition, technologies reported for microalgal biomass harvesting and CO₂ mass transfer enhancement in the coupling process were presented and discussed. Finally, this article discusses the potential benefits and challenges of coupling nutrient bioremediation, CO₂ capture, and microalgal production. Possible engineering measures for cost-effective nutrients removal, carbon fixation, microalgal biofuels and bioproducts production are also proposed.

Enhancement of biofuel production by microalgae using cement flue gas as substrate

The cement industry generates a substantial amount of gaseous pollutants that cannot be treated efficiently and economically using standard techniques. Microalgae, a promising bioremediation and biodegradation agent used as feedstock for biofuel production, can be used for the biotreatment of cement flue gas. In specific, components of cement flue gas such as carbon dioxide, nitrogen, and sulfur oxides are shown to serve as nutrients for microalgae. Microalgae also have the capacity to sequestrate heavy metals present in cement kiln dust, adding further benefits. This work provides an extensive overview of multiple approaches taken in the inclusion of microalgae biofuel production in the cement sector. In addition, factors influencing the production of microalgal biomass are also described in such an integrated plant. In addition, process limitations such as the adverse impact of flue gas on medium pH, exhaust gas toxicity, and efficient delivery of carbon dioxide to media are also discussed. Finally, the article concludes by proposing the future potential for incorporating the microalgae biofuel plant into the cement sector.

Influence of temperature on enhancement of volatile fatty acids fermentation from organic fraction of municipal solid waste: Synergism between food and paper components

This study explores individual contributions and synergistic effects of food and paper, main components of organic fraction of municipal solid waste (OFMSW) towards volatile fatty acids (VFA) fermentation under different temperatures (25, 37, 42 and 52 °C). Thanks to the synergism of food and paper component (FC & PC), the results revealed that OFMSW is suitable for VFA production. Maximum VFA production was noticed to be 21.5 mg/L at 42 °C, ~2.1, and 1.42 times higher than fermentation of PC and FC. Enhanced hydrolysis of PC occurred at >37 °C, increasing alkalinity in leachate to 6.7 g/L at 42 °C, thus maintaining a stable pH (5.4-5.6) during acidogenic fermentation. Additionally, 74% of COD is hydrolyzed, of which 79% is converted to VFA based on biodegradable carbon at 42 °C. It is suggested that co-existence of FC and PC can enhance VFA production of OFMSW, and targeted VFA production can be maximized through process optimization.

Algal biorefinery models with self-sustainable closed loop approach: Trends and prospective for blue-bioeconomy

Microalgae due to its metabolic versatility have received a focal attention in the biorefinery and bioeconomy context. Microalgae products have broad and promising application potential in the domain of renewable fuels/energy, nutraceutical, pharmaceuticals and cosmetics. Biorefining of microalgal biomass in a circular loop with an aim to maximize resource recovery is being considered as one of the sustainable option that will have both economical and environmental viability. The expansive scope of microalgae cultivation with self-sustainability approach was discussed in this communication in the framework of blue-bioeconomy. Microalgae based primary products, cultivation strategies, valorization of microalgae biomass for secondary products and integrated biorefinery models for the production of multi-based products were discussed. The need and prospect of self-sustainable models in closed loop format was also elaborated.

Enhanced biomass productivity of Arthrospira platensis using zeolitic imidazolate framework-8 as carbon dioxide adsorbents

In order to improve CO₂ diffusion in algae solution and conversion into dissolved HCO₃^-, zeolitic imidazolate framework-8 (ZIF-8) with zinc cores as unsaturated metal sites was first used as CO₂ adsorbents. Flue gas CO₂ from coal-chemical industry can be adsorbed and can be made available throughout cultivation to promote biomass productivity of Arthrospira platensis. The ZIF-8 adsorbent with particle size of 719 nm performed the largest pore area of 351.8 m²/g, which promoted CO₂ conversion into HCO₃^- by 72.9% compared to control condition without ZIF-8. The increased HCO₃^- concentration enhanced thylakoid membrane proportion in cell cross-sectional area by 1.3 times to 78.3%, which resulted in enhancement of photosynthesis in A. platensis cells. Relative electron transport rate increased by 9.4% accordingly, which was attributed to the improvement of chlorophyll a concentration by 110%. The biomass productivity using ZIF-8 adsorbent with particle size of 719 nm markedly increased by 64.0%.

Biological removal of nitrogen oxides by microalgae, a promising strategy from nitrogen oxides to protein production

Nitrogen oxides (NO_x) are the components of fossil flue gases that give rise to serious environmental and health hazards. Among the available techniques for NO_x removal, microalgae-based biological removal of NO_x (BioDeNO_x) is a promising and competent technology with eco-friendly path of low energy and low-cost solution for the pollution. In this review article, current biological technologies including bacteria-based and microalgae-related BioDeNO_x are discussed. Comparing to direct BioDeNO_x approach, indirect BioDeNO_x by microalgae is more promising since it is more stable, reliable and efficient. By transforming inorganic nitrogen nutrients to organic nitrogen, microalgae can potentially play an important role in converting NO_x into high-value added products. The microalgae-based BioDeNO_x process displays an attractive prospect for flue gas treatment to reduce environmental NO_x pollution and potentially supply protein products, establishing an efficient circular-economy strategy.

Modification and improvement of microalgae strains for strengthening CO2 fixation from coal-fired flue gas in power plants

Biological CO₂ capture using microalgae is a promising new method for reducing CO₂ emission of coal-fired flue gas. The strain of microalgae used in this process plays a vital role in determining the rate of CO₂ fixation and characteristics of biomass production. High requirements are put forward for algae strains due to high CO₂ concentration and diverse pollutants in flue gas. CO₂ can directly diffuse into the cytoplasm of cells by extra- and intracellular CO₂ osmotic pressure under high CO₂ concentrations. The flue gas pollutants, such as SO_x, NO_x and fly ashes, have negative effects on the growth of microalgae. This work reviewed the state-of-the-art advances on microalgae strains used for CO₂ fixation, focusing on the modification and improvement of strains that are used for coal-fired flue gas. Methods such as genetic engineering, random mutagenesis, and adaptive evolution have the potential to facilitate photosynthesis, improve growth rate and reduce CO₂ emission.

Application of a microalga, Scenedesmus obliquus PF3, for the biological removal of nitric oxide (NO) and carbon dioxide

Nitrogen oxide (NOx) emissions from flue gas lead to a series of environmental problems. Biological removal of Nitrogen oxide (NOx) from flue gas by microalgae is a potential approach for reducing the problems caused by these emissions. However, few microalgal strains are reported to remove NOx from flue gas. Here, a microalga strain PF3 (identified as Scenedesmus obliquus), which can remove NOx and fix CO₂ from flue gas is isolated. The tolerance of Scenedesmus obliquus PF3 to CO₂, NO, SO₂ and its adaptabilities to environmental factors (pH and temperature), and its performance in the removal of NO and CO₂ are investigated. Scenedesmus obliquus PF3 showed biomass accumulation when sparged with 15% CO₂ or 500 ppm NO or 50 ppm SO₂, and bisulfite less than 2 mM showed no toxicity to Scenedesmus obliquus PF3. Additionally, PF3 grew well in a wide range of pH and temperatures from 4.5 to 10.5 and 15 °C-30 °C, respectively. When sparged with simulated flue gas (100 ppm NO, 10% CO₂, (N₂ as balance gas)), the microalgae culture system removed NO and CO₂ at a rate of 2.86 ± 0.23 mg L^-1 d^-1 and 1.48 ± 0.12 g L^-1 d^-1, respectively, where up to 96.9 ± 0.03% (2.77 ± 0.08 mg L^-1 d^-1) and 87.7 ± 6.22% (1.29 ± 0.01 mg L^-1 d^-1) of the removed NO and CO₂, respectively, were assimilated in algal biomass. These results suggest that Scenedesmus obliquus PF3 is a promising candidate for NOx removal and carbon fixation of flue gas.

Thermogravimetric and kinetic analysis to discern synergy during the co-pyrolysis of microalgae and swine manure digestate

BACKGROUND

Co-pyrolysis of wastes with other feedstock can synergistically improve the rate of biomass decomposition and also help to resolve the issues related to limited availability feedstock. In this regards, synergistic interaction between feedstock during co-pyrolysis is an important aspect of research. As the constituents of aquatic and lignocellulosic biomass are different, and the decomposition pattern of aquatic biomass is dissimilar when compared to lignocellulosic biomass, it is important to understand whether these two biomasses interact during co-pyrolysis.

RESULTS

Synergism in the co-pyrolysis of microalgae (MA), swine manure digestate (SWD), and their blends (MA/SWD) (w/w %), 2.5/7.5 (MD-1), 5/5 (MD-2), and 7.5/2.5 (MD-3), was evaluated based on decomposition behavior, gas yields, extent of thermal degradation, and kinetics. Extractives and volatiles in biomass enhanced the reaction kinetics and products yields, as indicated by the reduction in apparent activation energy of the blends, accompanied by an increase in H2, total gas yield, and extent in degradation. Thermogravimetric data, via isoconversional methods, were interpreted to achieve the apparent activation energies for the thermal degradation of the MA, SWD, and their blends. The best fit reaction models were identified using compensation effect and generalized master plots methods. Semi-quantitative method was used to quantify the evolved gas species. H2, CO, and CO2 were noted to be the dominant gases, implying that tar cracking and reforming reactions were predominant.

CONCLUSIONS

Overall, synergy was noticed with respect to the pyrolysis of SWD biomass to gas products in the presence of MA biomass, whereas synergy was witnessed up to 50 w/w % MA in view of kinetic parameters as evaluation criteria.

Adaptive evolution and carbon dioxide fixation of Chlorella sp. in simulated flue gas

Carbon dioxide and other greenhouse gas emissions leads to global warming. Biological capture through microalgae is a potential approach for solving this environmental problem. It is still a technical challenge to enhance the tolerance of microalgae to flue gas if CO₂ is fixed from flue gas directly. A new strain, Chlorella sp. Cv was obtained through adaptive evolution (46 cycles) against simulated flue gas (10% CO₂, 200 ppm NO_x and 100 ppm SO_x). It was confirmed that Chlorella sp. Cv could tolerate simulated flue gas conditions and the maximum CO₂ fixation rate was 1.2 g L^-1 d^-1. In a two-stage process, the biomass concentration was 2.7 g L^-1 and the carbohydrate content was 68.4%. Comparative transcriptomic analysis was performed for Chlorella sp. Cv under simulated flue gas and control conditions (10% CO₂). These responses against simulated flue gas uncovered the significant difference between the evolved strain and the original strain. The metabolic responses to flue gas were explored with focus on various specific genes. Upregulation of several genes related to photosynthesis, oxidative phosphorylation, CO₂ fixation, sulfur metabolism and nitrogen metabolism was beneficial for the evolved strain to tolerate the simulated flue gas. The upregulation of genes related to extracellular sulfur transport and nitrate reductase was essential to utilize the sulfate and nitrate from dissolved SO_x and NO_x. The results in this study are helpful to establish a new process for CO₂ capture directly from industrial flue gas.

Bioethanol production from agarophyte red seaweed, Gelidium elegans, using a novel sample preparation method for analysing bioethanol content by gas chromatography

In this study, Gelidium elegans is investigated for ethanol production. A combination of factors including different temperatures, acid concentration and incubation time was evaluated to determine the suitable saccharification conditions. The combination of 2.5% (w/v) H₂SO₄ at 120 °C for 40 min was selected for hydrolysis of the seaweed biomass, followed by purification, and fermentation to yield ethanol. The galactose and glucose were dominant reducing sugars in the G. elegans hydrolysate and under optimum condition of dilute acid hydrolysis, 39.42% of reducing sugars was produced and fermentation resulted in ethanol concentration of 13.27 ± 0.47 g/L. A modified method was evaluated for sample preparation for gas chromatography (GC) analysis of the ethanol content. A solvent mixture of acetonitrile and iso-butanol precipitated dissolved organic residues and reduced water content in GC samples at least by 90%. Results showed that this method could be successfully used for bioethanol production from seaweed.

Sustainability Analysis of Microalgae Production Systems: A Review on Resource with Unexploited High-Value Reserves

Sustainability, at present, is a prominent component in the development of production systems that aim to provide the future energy and material resources. Microalgae are a promising feedstock; however, the sustainability of algae-based production systems is still under debate. Commercial market volumes of algae-derived products are still narrow. The extraction and conversion of primary metabolites to biofuels requires cultivation at large scales; cost-effective methods are therefore highly desirable. This work presents a complete and up to date review on sustainability analysis of various microalgae production scenarios, including techno-economic, environmental, and social impacts, both in large-scale plants for bioenergy production and in medium-scale cultivars intended for the production of high added-value chemicals. The results show that further efforts in algal-based research should be directed to improving the productivity, the development of multi product scenarios, a better valorization of coproducts, the integration with current industrial facilities to provide sustainable nutrient resources from waste streams, and the integration of renewable technologies such as wind energy in algae cultivars.

Engineering isoprene synthesis in cyanobacteria

The renewable production of isoprene (Isp) hydrocarbons, to serve as fuel and synthetic chemistry feedstock, has attracted interest in the field recently. Isp (C₅ H₈ ) is naturally produced from sunlight, CO₂ and H₂ O photosynthetically in terrestrial plant chloroplasts via the terpenoid biosynthetic pathway and emitted in the atmosphere as a response to heat stress. Efforts to institute a high capacity continuous and renewable process have included heterologous expression of the Isp synthesis pathway in photosynthetic microorganisms. This review examines the premise and promise emanating from this relatively new research effort. Also examined are the metabolic engineering approaches applied in the quest of renewable Isp hydrocarbons production, the progress achieved so far, and barriers encountered along the way.