Cobalt-Tannin-Framework-Derived Amorphous Co-P/Co-N-C on N, P Co-Doped Porous Carbon with Abundant Active Moieties for Efficient Oxygen Reactions and Water Splitting

In Situ Construction of a Co2P/CoP Heterojunction Embedded on N-Doped Carbon as an Efficient Electrocatalyst for a Hydrogen Evolution Reaction

Noble metal-free electrocatalysts have received widespread attention in a hydrogen evolution reaction (HER) due to the importance of renewable energy development. Herein, a Co2P/CoP heterojunction embedded on an N-doped carbon (Co2P/CoP/NC) electrocatalyst was prepared via an in situ pyrolysis method. The as-prepared electrocatalyst exhibited efficient electrocatalytic activity for HER in an acidic solution. The Co2P/CoP/NC catalyst displayed an overpotential of 184 mV at 10 mA cm-2 and a low Tafel slope of 82 mV dec-1, which could be attributed to the tight Co2P/CoP heterojunction and the synergetic effect of Co2P/CoP and N-doped carbon. In addition, the electrochemical active surface area of Co2P/CoP/NC was 75.2 m2 g-1, which indicated that more active regions can be applied for the HER process. This report may pave a new way for the design of efficient and low-cost N-doped-carbon-supported 3d transition metal phosphide electrocatalysts.

Amorphous Co-Mo-P film on nickel foam: a superior bifunctional electrocatalyst for alkaline seawater splitting

Seawater splitting is a compelling avenue to produce abundant hydrogen, which requires high-performance and cost-effective catalysts. Constructing bimetallic transition metal phosphides is a feasible strategy to meet the challenge. Here, an amorphous Co-Mo-P film supported on nickel foam (Co-Mo-P/NF) electrode is developed with bifunctional properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline seawater. Corresponding results indicate that the introduction of Mo can improve the active sites and regulate the intrinsic activity. Such a Co-Mo-P/NF behaves with prominent electrocatalytic activity towards both HER and OER, demanding low overpotentials of 193 and 352 mV at 100 mA cm‒2in alkaline seawater, respectively. Furthermore, the assembled electrolyzer demands a pronounced overall seawater splitting activity with a low cell voltage of 1.76 V to deliver 100 mA cm-2presenting excellent durability without obvious attenuation after 24 h continuous stability test. This work expands the horizon to develop transition metal-phosphorus electrocatalysts with robust and efficient activity for overall seawater splitting.

Facile Synthesis of Co Nanoparticles Embedded in N-Doped Carbon Nanotubes/Graphitic Nanosheets as Bifunctional Electrocatalysts for Electrocatalytic Water Splitting

Developing robust and cost-effective electrocatalysts to boost hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs) is crucially important to electrocatalytic water splitting. Herein, bifunctional electrocatalysts, by coupling Co nanoparticles and N-doped carbon nanotubes/graphitic nanosheets (Co@NCNTs/NG), were successfully synthesized via facile high-temperature pyrolysis and evaluated for water splitting. The morphology and particle size of products were influenced by the precursor type of the cobalt source (cobalt oxide or cobalt nitrate). The pyrolysis product prepared using cobalt oxide as a cobalt source (Co@NCNTs/NG-1) exhibited the smaller particle size and higher specific surface area than that of the pyrolysis products prepared using cobalt nitrate as a cobalt source (Co@NCNTs/NG-2). Notably, Co@NCNTs/NG-1 displayed much lower potential -0.222 V vs. RHE for HER and 1.547 V vs. RHE for OER at the benchmark current density of 10 mA cm-2 than that of Co@NCNTs/NG-2, which indicates the higher bifunctional catalytic activities of Co@NCNTs/NG-1. The water-splitting device using Co@NCNTs/NG-1 as both an anode and cathode demonstrated a potential of 1.92 V to attain 10 mA cm-2 with outstanding stability for 100 h. This work provides a facile pyrolysis strategy to explore highly efficient and stable bifunctional electrocatalysts for water splitting.

One-Dimensional Selenidostannates Based on an Infrequent Tetrameric Cluster [Sn4Se12] Exhibiting Electro-Catalytic Properties

The discovery of low-cost and efficient electro-catalytic materials for hydrogen evolution reaction (HER) is very desirable in hydrogen energy technology. Here, a new type of one-dimensional (1-D) organic hybrid selenidostannate [Ni(en)₃]_n[Sn₂Se₅]_n (SnSe-1, en = ethylenediamine) with an in situ [Ni(en)₃]²⁺ complex was achieved by the solvothermal reaction of Sn, Se, and NiCl₂·6H₂O in a mixed solvent of en and triethanolamine at 160 °C for 10 days. The crystal structure of SnSe-1 contains a unique 1-D [Sn₂Se₅^2-]_n chain built up from the sharing-edge connection of a hitherto-unknown tetrameric [Sn₄Se₁₂] cluster, which is separated by discrete [Ni(en)₃]²⁺ complexes. SnSe-1 is first combined with Ni nanoparticles supported on conductive porous Ni foam (NF) to constitute a Ni/SnSe-1/NF electrode as the HER electro-catalyst, displaying superior electro-catalytic activity in near-neutral conditions.

Synthesis of amorphous trimetallic PdCuNiP nanoparticles for enhanced OER

Metal phosphides with multi-element components and amorphous structure represent a novel kind of electrocatalysts for promising activity and durability towards the oxygen evolution reaction (OER). In this work, a two-step strategy, including alloying and phosphating processes, is reported to synthesize trimetallic amorphous PdCuNiP phosphide nanoparticles for efficient OER under alkaline conditions. The synergistic effect between Pd, Cu, Ni, and P elements, as well as the amorphous structure of the obtained PdCuNiP phosphide nanoparticles, would boost the intrinsic catalytic activity of Pd nanoparticles towards a wide range of reactions. These obtained trimetallic amorphous PdCuNiP phosphide nanoparticles exhibit long-term stability, nearly a 20-fold increase in mass activity toward OER compared with the initial Pd nanoparticles, and 223 mV lower in overpotential at 10 mA cm^-2. This work not only provides a reliable synthetic strategy for multi-metallic phosphide nanoparticles, but also expands the potential applications of this promising class of multi-metallic amorphous phosphides.

Coupling Plant Polyphenol Coordination Assembly with Co(OH)2 to Enhance Electrocatalytic Performance towards Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is kinetically sluggish due to the limitation of the four-electron transfer pathway, so it is imperative to explore advanced catalysts with a superior structure and catalytic output under facile synthetic conditions. In the present work, an easily accessible strategy was proposed to implement the plant-polyphenol-involved coordination assembly on Co(OH)₂ nanosheets. A TA-Fe (TA = tannic acid) coordination assembly growing on Co(OH)₂ resulted in the heterostructure of Co(OH)₂@TA-Fe as an electrocatalyst for OER. It could significantly decrease the overpotential to 297 mV at a current density of 10 mA cm^-2. The heterostructure Co(OH)₂@TA-Fe also possessed favorable reaction kinetics with a low Tafel slope of 64.8 mV dec^-1 and facilitated a charge-transfer ability. The enhanced electrocatalytic performance was further unraveled to be related to the confined growth of the coordination assembly on Co(OH)₂ to expose more active sites, the modulated surface properties and their synergistic effect. This study demonstrated a simple and feasible strategy to utilize inexpensive biomass-derived substances as novel modifiers to enhance the performance of energy-conversion electrocatalysis.

Self-assembly of bimetallic polyoxometalates and dicyandiamide to form Co/WC@NC for efficient electrochemical hydrogen generation

Graphene carbon-coated and N-doped WC and cobalt (Co) nanoparticles (Co/WC@NC) were synthesized via a one-step straightforward high-temperature calcination. The resultant Co/WC@NC manifests excellent hydrogen evolution activity.

Catalytic oxidative dehydrogenation of N-heterocycles with nitrogen/phosphorus co-doped porous carbon materials

A metal-free oxidative dehydrogenation of N-heterocycles utilizing a nitrogen/phosphorus co-doped porous carbon (NPCH) catalyst is reported. The optimal material is robust against traditional poisoning agents and shows high antioxidant resistance. It exhibits good catalytic performance for the synthesis of various quinoline, indole, isoquinoline, and quinoxaline ‘on-water’ under air atmosphere. The active sites in the NPCH catalyst are proposed to be phosphorus and nitrogen centers within the porous carbon network.

Green oxidations made easy. Metal-free dehydrogenation of N-heterocycles are possible in using N,P-co-doped porous carbon materials “on” water using air.

Cobalt coordination controlled carbon nanospheres formation and inclusion of amorphous Co3O4 and AuNPs: strongly enhanced oxygen evolution reaction with excellent mass activity

Carbon nanospheres integrated with AuNPs and amorphous Co3O4 were fabricated by making use of cobalt coordination with AuNP surface ligands, which exhibited an enhanced oxygen evolution reaction (OER) with excellent mass activity. Co2+ coordination with AuNP surface functional molecules significantly influenced the nanostructure formation and OER activity. Nanospheres of carbon with an optimum concentration of AuNPs and Co3O4 (2) showed strong OER activity. 2 exhibited a high current density (358 mA cm-2 at an applied potential of 1.59 V) and required a low overpotential (256 mV) to generate a geometric current density (10 mA cm-2) compared to commercial RuO2 (363 mV). Importantly, 2 showed high mass activity (1352.5 mA mg-1), 14 times higher than RuO2 (93.87 mA mg-1). The low Tafel slope (52.4 mV dec-1) and charge transfer resistance along with large double layer capacitance (Cdl = 20.1) of 2 suggest strong electronic communication between the catalyst and the electrode surface and facilitated fast charge transport. Chronoamperometric studies confirmed the excellent stability of the catalyst. The present work demonstrates that the electrocatalytic activity of earth-abundant amorphous metal oxides can be strongly enhanced by integrating metallic nanoparticles (NPs) and optimizing nanostructures.

N-Doped carbon-coated Co2P-supported Au nanocomposite as the anode catalyst for borohydride electrooxidation

Au₍₅₀₎Co₂P@NC₍₅₀₎/C nanoparticle composite electrocatalyst combines the lower content of noble metal and much higher catalytic activity for BH₄⁻ electrooxidation.

Novel Bifunctional V2O3 Nanosheets Coupled with N-Doped-Carbon Encapsulated Ni Heterostructure for Enhanced Electrocatalytic Oxidation of Urea-Rich Wastewater

Developing high performance bifunctional transition metal catalysts would be significantly beneficial for electrocatalytic oxidation of urea-rich wastewater. Herein, we synthesize a V₂O₃ nanosheet anchored N-doped-carbon encapsulated Ni heterostructure (Ni@C-V₂O₃/NF) for the reactions of urea oxidation (UOR) and hydrogen evolution (HER). Electrochemical results indicate that it exhibits small potentials of 1.32, 1.39, and 1.43 V for UOR and low overpotentials of 36, 254, and 355 mV for HER at ±10, ± 500 and ±1000 mA cm^-2, respectively. It can work at 100 mA cm^-2 for over 72 h as cathode and anode electrode without obvious attenuation, suggesting an outstanding durability. The reason for this behavior could be ascribed to the N-doped-carbon coating structure, the synergetic effects between Ni and V₂O₃, and the nano/micro nanosheets architecture self-supported on nickel foam. This work could provide a promising, inexpensive, and green method for the degradation of urea-rich wastewater and hydrogen production.

Activating Titanium Dioxide as a New Efficient Electrocatalyst: From Theory to Experiment

Though transition-metal-based materials have emerged as the most promising alternatives to Pt-based electrocatalysts in hydrogen evolution reaction (HER), only a few of them (Fe-, Co-, Ni-, W-, and Mo-based materials) are used as efficient HER electrocatalysts, while others are generally considered as HER-inactive materials with poor activities. Here, a theory-guided experiment is carried out to activate titanium dioxide as a new efficient HER electrocatalyst. First-principles simulations indicate that the hydrogen adsorption free energy could be optimized through tuning the structural and electronic properties of TiO₂. Then Cu-doped amorphous TiO₂ is successfully prepared based on the theoretical results. The activated TiO₂ expectedly shows excellent HER performance with a low overpotential of 92 mV at 10 mA cm^-2 in alkaline media, which is far superior to that of the crystalline TiO₂ (over 400 mV). The origin of HER activity is further investigated in detail. The corrugation of the amorphous surface helps stabilize the adsorbed water molecule, crucial for the water dissociation of the Volmer step. The Cu doping can strengthen the orbital hybridization of H1s and O2p favoring the hydrogen adsorption/desorption and improve the electrical conductivity. Our work highlights the great potential of traditionally inactive materials in HER electrocatalysis and helps deepen our understanding of the catalytic mechanism.

Features of electron beam deposition of polymer coatings with the prolonged release of the drug component

The first part of the paper provides a comprehensive analysis of the features of electron beam formation of polymer coatings with the prolonged release of the drug compound using ciprofloxacin and clotrimazole as an example. The influence features of the low-energy electron beam on the molecular structure of medicinal chemical preparations have been established. The impossibility of producing the coatings based on medicinal compounds with a complex molecular structure (vancomycin, micafungin, etc.) by a low-energy electron beam has been justified. The second part of the paper introduces a fundamentally new vacuum method for the formation of the composite coatings based on antibiotics and antifungal drugs, accompanied by the prolonged release of the drug component. This method allows the formation of composite coatings based on medicinal compounds with a complex molecular structure. It is effective for modifying implants to prevent the risk of implant-associated infectious complications which are the result of the occurrence of mixed biofilms. The method can be used to form composite layers based on topical antitumor drugs for cancer control.

Sulfate-Functionalized Nickel Hydroxide Nanobelts for Sustained Oxygen Evolution

Nickel hydroxide (Ni(OH)₂)-based electrocatalysts are promising for the oxygen evolution reaction (OER) due to their low cost, but their activity and durability still need substantial improvement to meet practical application. Here, we report a sulfate-functionalized Ni(OH)₂ nanobelt (S-Ni(OH)₂) electrocatalyst, which exhibited self-enhanced OER activity due to its self-renewed surface during anodic oxidation. The S-Ni(OH)₂ was in situ grown on the nickel foam (NF) surface in potassium peroxydisulfate solution through one-step hydrothermal treatment. This material outperformed all the existing electrocatalysts in the intensity and duration of the OER activity enhancement. An overpotential drop of 70 mV is shown by the S-Ni(OH)₂/NF electrode during 110 h reaction at a current density of 100 mA cm^-2, and the overpotential remains as low as 358 mV at a current density of 200 mA cm^-2. Such activity enhancement during OER is mainly ascribed to the formation of a highly active NiOOH/Ni(SO₄)_0.3(OH)_1.4 composite on the S-Ni(OH)₂ surface as a result of gradual sulfate release. Given the facile and environmentally benign fabrication process (without external addition of a Ni source and surfactant) and good electrochemical properties (high activity and long lifetime), the S-Ni(OH)₂ holds great potential for practical OER application. The surface self-renewal strategy developed here might also be expanded to other electrocatalysts and electrochemical processes.

Iron Sulfide Nanoparticles Embedded Into a Nitrogen and Sulfur Co-doped Carbon Sphere as a Highly Active Oxygen Reduction Electrocatalyst

The unique micro/mesoporous spherical nanostructure composed of non-noble metal nanoparticles encapsulated within a heteroatom-doped carbon matrix provides great advantages for constructing advanced non-precious oxygen reduction (ORR) electrocatalysts. Herein, a promising oxygen electrocatalyst comprising iron sulfide (Fe_1−xS) nanoparticles embedded into a nitrogen and sulfur co-doped carbon sphere (Fe_1−xS/NS-CS) is successfully explored through a simple and fast polymerization between methylolmelamines (MMA) and ammonium ferric citrate (AFC) as well as a high-temperature vulcanization process. Moreover, the proposed polymerization reaction can be finished completely within a very short time, which is useful for large-scale manufacturing. Impressively, the developed Fe_1−xS/NS-MCS catalyst demonstrates outstanding ORR catalytic activity in terms of a more positive onset and half-wave potential as well, as much a better methanol tolerance and stability, in comparison with that of Pt/C benchmarked catalyst. The remarkable ORR electrocatalytic properties are strongly associated with the favorable characteristic spherical N, the S co-doped porous graphitic carbon nanoskeleton incorporated with the Fe_1−xS nanoparticle-encapsulation structure.

MOF-derived two-dimensional N-doped carbon nanosheets coupled with Co-Fe-P-Se as efficient bifunctional OER/ORR catalysts

Developing highly efficient, low-cost and bifunctional electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) plays a pivotal role in the scalable applications of zinc-air (Zn-air) batteries. Herein, Co-Fe-P-Se nanoparticles supported on two-dimensional nitrogen-doped carbon (Co-Fe-P-Se/NC) to construct a three-dimensional nanostructure were obtained under the assistance of metal-organic frameworks (MOFs). The two-dimensional nanosheet facilitated the electron transfer rate and exposed abundant active sites. The three-dimensional morphology composed of nanosheets was favorable for electrolyte transport and provided abundant channels for gas diffusion during the catalytic process. Moreover, the coexistence of Co and Fe had important effects on promoting the catalytic performances. Lastly, the catalytic performances for OER and ORR could be promoted effectively after the introduction of selenium and phosphorous in the designed electrocatalyst. Benefiting from the above merits, the prepared Co-Fe-P-Se/NC exhibited excellent catalytic performances for OER (overpotential of 0.27 V at 10 mA cm^-2), ORR (half-wave potential of 0.76 V) and rechargeable batteries (a low voltage gap of 0.719 V, high power density of 104 mW cm^-2 at 200 mA cm^-2 and high energy density of 805 W h Kg_Zn^-1). Moreover, the prepared electrocatalyst possessed more stable long-term stability in all the conducted experiments. This work provides a novel approach to develop and construct high-performance bifunctional nanocatalysts for metal-air batteries.

Controlled synthesis of single cobalt atom catalysts via a facile one-pot pyrolysis for efficient oxygen reduction and hydrogen evolution reactions

Metal-nitrogen doped carbon catalysts (M-N/C) with abundantly accessible M-N_x sites, particularly single metal atom M-N/C (SAM-N/C), have been developed as a substitute for expensive Pt-based catalysts. These catalysts are used to increase the efficiency of otherwise sluggish oxygen reduction reactions (ORR) and hydrogen evolution reactions (HER). However, although the agglomerated metal nanoparticles are usually easy to form, they are very difficult to remove due to the protective surface-coating carbon layers, a factor that significantly hampers SAM-N/C fabrication. Herein, we report a one-step pyrolysis approach to successfully fabricate single cobalt atom Co-N/C (SACo-N/C) by using a Co²⁺-SCN^- coordination compound as the metal precursor. Thanks to the decomposition of Co²⁺-SCN^- compound at lower temperature than that of carbon layer deposition, Co-rich particles grow up to larger ones before carbon layers formation. Even though encapsulated by the carbon layers, it is difficult for the large Co-rich particle to be completely sealed. And thus, it makes the Co atoms possible to escape from incomplete carbon layer, to coordinate with nitrogen atoms, and to form SACo-N/C catalysts. This SACo-N/C exhibits excellent performances for both ORR (half-wave potential of 0.878 V) and HER (overpotential at 10 mA/cm² of 178 mV), and is thus a potential replacement for Pt-based catalysts. When SACo-N/C is integrated into a Zn-O₂ battery, battery with high open-circuit voltage (1.536 V) has high peak power density (266 mW/cm²) and large gravimetric energy density (755 mA h/g_Zn) at current densities of 100 mA/cm². Thus, we believe that this strategy may offer a new direction for the effective generation of SAM-N/C catalysts.