Fluoridated Iron-Nickel Layered Double Hydroxide for Enhanced Performance in the Oxygen Evolution Reaction

Fluorine-Induced Lattice Oxygen Participation in 2D Layered Double Hydroxide/MXene Hybrids for Efficient Oxygen Evolution

In oxygen evolution reaction (OER), the participation of lattice oxygen can break the limitation of adsorption evolution mechanism, but the activation of lattice oxygen remains a critical challenge. Herein, a surface fluorinated highly active 2D/2D FeNi layered double hydroxide/MXene (F-LDH/MX) is demonstrated, boosting OER with the enhanced lattice-oxygen-mediated path. The introduction of fluorine promotes the self-evolution of catalyst in an alkaline environment, even without an external current. It further accelerates the formation of active metal oxyhydroxides with abundant oxygen vacancies under the operating potential. The introduced oxygen vacancy activates the lattice oxygen, increasing the proportion of lattice oxygen mechanism in OER. Owing to the synergistic effects of the 2D/2D hierarchical structure and the modulated active surface, F-LDH/MX possesses excellent electrochemical performances, including a low overpotential of 251 mV at 10 mA cm-2, a low Tafel slope of 40.28 mV dec-1, and robust stability. The water electrolyzer system with F-LDH/MX as the anode offers the benchmark current density at a low cell voltage of 1.53 V, while the Zn-air battery with F-LDH/MX as the air electrode exhibits a higher power density of 75.43 mW cm-2. This study presents a promising strategy to design highly active electrocatalysts for energy conversion and storage.

Fluorine-Lodged High-Valent High-Entropy Layered Double Hydroxide for Efficient, Long-Lasting Zinc-Air Batteries

Efficient and stable bifunctional oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts are urgently needed to unlock the full potential of zinc-air batteries (ZABs). High-valence oxides (HVOs) and high entropy oxides (HEOs) are suitable candidates for their optimal electronic structures and stability but suffer from demanding synthesis. Here, a low-cost fluorine-lodged high-valent high-entropy layered double hydroxide (HV-HE-LDH) (FeCoNi2F4(OH)4) is conveniently prepared through multi-ions co-precipitation, where F- are firmly embedded into the individual hydroxide layers. Spectroscopic detections and theoretical simulations reveal high valent metal cations are obtained in FeCoNi2F4(OH)4, which enlarge the energy band overlap between metal 3d and O 2p, enhancing the electronic conductivity and charge transfer, thus affording high intrinsic OER catalytic activity. More importantly, the strengthened metal-oxygen (M-O) bonds and stable octahedral geometry (M-O(F)6) in FeCoNi2F4(OH)4 prevent structural reorganization, rendering long-term catalytic stability. Furthermore, an efficient three-phase reaction interface with fast oxygen transportation was constructed, significantly improving the ORR activity. ZABs assembled with FeCoNi2F4(OH)4@HCC (hydrophobic carbon cloth) cathodes deliver a top performance with high round-trip energy efficiency (61.3 % at 10 mA cm-2) and long-term stability (efficiency remains at 58.8 % after 1050 charge-discharge cycles).

Interfacial Regulation of Rice-Grain-like Iron-Nickel Phosphide Nanorods on Phosphorus-Doped Graphene Architectures as Bifunctional Electrocatalysts for Water Splitting

The design of bimetallic metal-organic frameworks (MOFs) with a hierarchical structure is important to improve the electrocatalytic performance of catalysts due to their synergistic effect on different metal ions. In this work, the catalyst comprises bimetallic iron-nickel MOF-derived FeNi phosphides, intricately integrated with phosphorus-doped reduced graphene oxide architectures (FeNi2P-C/P-rGA) through the hydrothermal and phosphating treatments. The hierarchical architecture of the catalyst is beneficial for exposing active sites and facilitating electron transfer. The FeNi2P-C/P-rGA catalyst exhibits excellent performance in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline electrolytes. Notably, FeNi2P-C/P-rGA requires only the overpotential of 93 and 210 mV to achieve a current density of 10 mA cm-2 for the HER and OER with small values of Tafel slope and charge transfer resistance, respectively. Furthermore, the catalyst exhibits boosted activity for overall water splitting with a low potential of 1.56 V. This work can be considered to extend the design of multilevel catalysts in the application of water splitting.

Hf-Doped CoP Hollow Nanocubes as High-Performance Electrocatalyst for Oxygen Evolution Reaction

Designing and synthesizing hollow frame structures with unique three-dimensional open structures in electrocatalysis remain a challenge. Etching is an effective method to synthesize metal-organic frameworks (MOFs) with a hollow structure and rich function. Herein, we report the design and synthesis of Hf-doped CoP hollow nanocubes by selective etching and ion exchange. Different from the traditional etching method, we used acid xylenol orange solution to etch typically the (211) crystal face of ZIF-67, obtaining the unique bell-like structure, named XO-ZIF-67. Subsequently, Hf-doped CoP hollow nanocubes were formed by Hf4+ doping and simple phosphating treatment. Electrochemical tests showed that the overpotential of the obtained catalyst is only 291 mV at the current density of 10 mA cm-2 when applied in catalyzing the oxygen evolution reaction (OER). Furthermore, the catalyst shows excellent stability when running in 1 M KOH solution for 25 h.

Hierarchically Structured Graphene Aerogel Supported Nickel-Cobalt Oxide Nanowires as an Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design of a heterostructure electrocatalyst is an attractive strategy to produce hydrogen energy by electrochemical water splitting. Herein, we have constructed hierarchically structured architectures by immobilizing nickel-cobalt oxide nanowires on/beneath the surface of reduced graphene aerogels (NiCoO2/rGAs) through solvent-thermal and activation treatments. The morphological structure of NiCoO2/rGAs was characterized by microscopic analysis, and the porous structure not only accelerates the electrolyte ion diffusion but also prevents the agglomeration of NiCoO2 nanowires, which is favorable to expose the large surface area and active sites. As further confirmed by the spectroscopic analysis, the tuned surface chemical state can boost the catalytic active sites to show the improved oxygen evolution reaction performance in alkaline electrolytes. Due to the synergistic effect of morphology and composition effect, NiCoO2/rGAs show the overpotential of 258 mV at the current density of 10 mA cm-2. Meanwhile, the small values of the Tafel slope and charge transfer resistance imply that NiCoO2/rGAs own fast kinetic behavior during the OER test. The overlap of CV curves at the initial and 1001st cycles and almost no change in current density after the chronoamperometric (CA) test for 10 h confirm that NiCoO2/rGAs own exceptional catalytic stability in a 1 M KOH electrolyte. This work provides a promising way to fabricate the hierarchically structured nanomaterials as efficient electrocatalysts for hydrogen production.

Microzone-Acidification-Driven Degradation Mechanism of the NiFe-Based Anode in Seawater Electrolysis

The anode stability is critical for efficient and reliable seawater electrolyzers. Herein, a NiFe-based film catalyst was prepared by anodic oxidation to serve as a model electrode, which exhibited a satisfactory oxygen evolution performance in simulated alkaline seawater (1 M KOH + 0.5 M NaCl) with an overpotential of 348 mV at 100 mA cm-2 and a long-term stability of over 100 h. After that, the effects of the current density and bulk pH of the electrolyte on its stability were evaluated. It was found that the electrode stability was sensitive to electrolysis conditions, failing at 20 mA cm-2 in 0.1 M KOH + 0.5 M NaCl but over 500 mA cm-2 in 0.5 M KOH + 0.5 M NaCl. The electrode dissolved, and some precipitates immediately formed at the region very close to the electrode surface during the electrolysis. This can be ascribed to the pH difference between the electrode/electrolyte interface and the bulk electrolyte under anodic polarization. In other words, the microzone acidification accelerates the corrosion of the electrode by Cl-, thus affecting the electrode stability. The operational performances of the electrode under different electrolysis conditions were classified to further analyze the degradation behavior, which resulted in three regions corresponding to the stable oxygen evolution, violent dissolution-precipitation, and complete passivation processes, respectively. Thereby increasing the bulk pH could alleviate the microzone acidification and improve the stability of the anode at high current densities. Overall, this study provides new insights into understanding the degradation mechanism of NiFe-based catalysts and offers electrolyte engineering strategies for the application of anodes.

Graphene Architecture-Supported Porous Cobalt-Iron Fluoride Nanosheets for Promoting the Oxygen Evolution Reaction

The design of efficient oxygen evolution reaction (OER) electrocatalysts is of great significance for improving the energy efficiency of water electrolysis for hydrogen production. In this work, low-temperature fluorination and the introduction of a conductive substrate strategy greatly improve the OER performance in alkaline solutions. Cobalt-iron fluoride nanosheets supported on reduced graphene architectures are constructed by a one-step solvothermal method and further low-temperature fluorination treatment. The conductive graphene architectures can increase the conductivity of catalysts, and the transition metal ions act as electron acceptors to reduce the Fermi level of graphene, resulting in a low OER overpotential. The surface of the catalyst becomes porous and rough after fluorination, which can expose more active sites and improve the OER performance. Finally, the catalyst exhibits excellent catalytic performance in 1 M KOH, and the overpotential is 245 mV with a Tafel slope of 90 mV dec-1, which is better than the commercially available IrO2 catalyst. The good stability of the catalyst is confirmed with a chronoamperometry (CA) test and the change in surface chemistry is elucidated by comparing the XPS before and after the CA test. This work provides a new strategy to construct transition metal fluoride-based materials for boosted OER catalysts.

High-entropy wire-on-sheet nanoarray catalyst with boosted pre-oxidation for efficient oxygen evolution reaction

Herein, a septenary NiCoZnFeCuMnCe hydroxide nanoarray catalyst with a unique wire-on-sheet morphology and high-entropy feature was fabricated, which exhibits boosted pre-oxidation behavior and synergistically enhanced catalytic activity and durability towards the oxygen evolution reaction.

Engineering Amorphous/Crystalline Rod-like Core-Shell Electrocatalysts for Overall Water Splitting

The design of bifunctional electrocatalysts for hydrogen and oxygen evolution reactions delivering excellent catalytic activity and stability is highly desirable, yet challenged. Herein, we report an amorphous RuO₂-encapsulated crystalline Ni_0.85Se nanorod structure (termed as a/c-RuO₂/Ni_0.85Se) for enhanced HER and OER activities. The as-prepared a/c-RuO₂/Ni_0.85Se nanorods not only demonstrate splendid HER activity (58 mV@10 mA cm^-2 vs RHE), OER activity (233 mV@10 mA cm^-2 vs RHE), and electrolyzer activity (1.488 V@10 mA cm^-2 vs RHE for overall water splitting) but also exhibit long-term stability with negligible performance decay after 50 h continuous test for overall water splitting. In addition, the variation of the d-band center (from the perspective of bonding and antibonding states) is unveiled theoretically by density functional theory calculations upon amorphous RuO₂ layers coupling to clarify the increased hydrogen species adsorption for HER activity enhancement. This work represents a new pathway for the fabrication of bifunctional electrocatalysts toward green hydrogen generation.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Engineering the Electronic Structures of Metal-Organic Framework Nanosheets via Synergistic Doping of Metal Ions and Counteranions for Efficient Water Oxidation

Metal-organic framework (MOF) nanosheets with attractive chemical and structural properties have been considered as prominent oxygen evolution reaction (OER) electrocatalysts, while the insufficient exposed active sites and low electrical conductivity of MOFs limit their electrocatalytic activity and further industrial applications. Herein, a unique strategy to remarkably boost electrocatalytic OER activity of one Ni-based MOF is developed by the simultaneous incorporation of Fe³⁺ ions and BF₄^- anions within its layer structure. The optimized electrocatalyst NiFe-MOF-BF₄^--0.3 NSs shows superior OER activity with a required ultralow overpotential of 237 mV at 10 mA cm^-2, a small Tafel slope of 41 mV dec^-1, and outstanding stability in an alkaline medium. The experimental and density functional theory (DFT) calculation results verify that the interactions between metal (M) ions and BF₄^- anions (defined as M···F, M = Ni or Fe) in this catalyst can adjust the adsorption abilities of oxygen intermediates and lower the free energy barrier of the potential-determining step by tailoring its electronic structure, thereby remarkably boosting its OER activity. This protocol provides new insights into surface and structure engineering of 2D MOFs, leading to greatly enhanced electrocatalytic OER performance.

Function of Doping Ru Element in the Hydrogen Evolution Reaction in Rare-Earth Transition-Metal Intermetallics

Transition metal-based intermetallics are promising electrocatalysts for replacing the commercial Pt metal in the hydrogen evolution reaction (HER). In this work, RENi₂ and RERu_0.25Ni_1.75 (RE = Pr, Tb, and Er) were synthesized and their electrocatalytic HER activities were explored. Among undoped compounds, PrNi₂ exhibits the best performance and requires an overpotential of 55 mV, while partially replacing Ni with Ru element (PrRu_0.25Ni_1.75) can greatly reduce the overpotential to 20 mV at a current density of 10 mA/cm². Such enhancement was recognized that belongs to their extrinsic property, and their intrinsic HER activities were similar after normalizing the electrocatalytic surface area. Further investigation on ScM₂ and ScRu_0.25M_1.75 (M = Co and Ni) suggests that doping Ru element in ScCo₂ will significantly enhance antibonding character around the Fermi level (E_F) and weaken hydrogen adsorption energy. On the other hand, the antibonding population for ScNi₂ and ScRu_0.25Ni_1.75 is similar at E_F, which accounts for their close intrinsic HER activities.

Iron sulphide rice grain nanostructures as potential electrocatalysts for an improved oxygen evolution reaction

Iron based chalcogenides are considered a promising group of electro-active materials for various electrochemical technologies. Herein we demonstrate a facile fabrication of various iron sulphide (FeS) nanostructures, including rice grains (RGS)-, nanoflowers (NFS)- and nanoparticles (NPS)-like surface morphologies via electrochemical, solvothermal and chemical strategies, respectively. The as-developed FeS nanostructures have been employed as electrocatalysts for the oxygen evolution reaction (OER) in an alkaline electrolyte. Among other FeS nanostructures, FeS rice grains (FeS-RGS) exhibited an outstanding OER activity with a low onset potential (∼1.37 V), low overpotential (∼0.20 V), small Tafel slope (∼54.2 mV dec^-1), high mass activity (∼5.4 A g^-1), and high durability, outperforming the commercial state-of-the-art RuO₂ catalyst. The high-performance OER activity of the FeS-RGS is associated not only to the synergistic effect of Fe and S, but also to the direct growth (binder-free) and edges of rice grain structures, offering a large number of electrochemical active sites and ensuring fast-diffusion of OH^- ions of the nanostructures. The present one-step, low-cost and highly scalable preparation of FeS-RGS nanostructures provides new possibilities of morphology and synthetic methodology dependence of OER electrocatalysts for effective hydrogen production.

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm^-2 with a Tafel slope of 27.8 mV dec^-1 in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec^-1 in 0.5 M H₂ SO₄ . The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.

Promoting Oxygen Evolution by Deep Reconstruction via Dynamic Migration of Fluorine Anions

Promoting the reconstruction of electrocatalysts during the oxygen evolution reaction (OER) is generally regarded as a promising strategy for enhanced activity. F anions with strong electronegativity are predicted to enhance this transformation. Herein, a fluorine-anion doping route is proposed to convert the well-latticed NiMoO₄@MNF to amorphous F-NiMoO₄@MNF by a facile and versatile molten salt strategy. The well-defined nanorod arrays guarantee abundant exposed active sites, rapid mass transfer, and fast gas bubble release. Moreover, the emerged loose amorphous structure is conducive to the dynamic migration of F species and effective penetration of the electrolyte; therefore, the resulting exchange between F and hydroxide anions induces the formation of an active oxy(hydroxide) layer, thus finally optimizing the electronic structure and absorption/desorption energy on the surface of F-NiMoO₄@MNF. The boosted OER performance of reconstructed F-NiMoO₄@MNF is reliably confirmed by a low overpotential of 188 mV at 50 mA cm^-2, a small Tafel slope of 33.8 mV dec^-1, and favorable long-term stability. In addition, accelerated hydrogen evolution is observed, which is ascribed to the finely tuned electron distribution. This work would provide a new reconstruction route assisted by F-anion doping to the development of high-performance catalysts.

Transition Metal-Based 2D Layered Double Hydroxide Nanosheets: Design Strategies and Applications in Oxygen Evolution Reaction

Water splitting driven by renewable energy sources is considered a sustainable way of hydrogen production, an ideal fuel to overcome the energy issue and its environmental challenges. The rational design of electrocatalysts serves as a critical point to achieve efficient water splitting. Layered double hydroxides (LDHs) with two-dimensionally (2D) layered structures hold great potential in electrocatalysis owing to their ease of preparation, structural flexibility, and tenability. However, their application in catalysis is limited due to their low activity attributed to structural stacking with irrational electronic structures, and their sluggish mass transfers. To overcome this challenge, attempts have been made toward adjusting the morphological and electronic structure using appropriate design strategies. This review highlights the current progress made on design strategies of transition metal-based LDHs (TM-LDHs) and their application as novel catalysts for oxygen evolution reactions (OERs) in alkaline conditions. We describe various strategies employed to regulate the electronic structure and composition of TM-LDHs and we discuss their influence on OER performance. Finally, significant challenges and potential research directions are put forward to promote the possible future development of these novel TM-LDHs catalysts.

Surface Fluorination Engineering of NiFe Prussian Blue Analogue Derivatives for Highly Efficient Oxygen Evolution Reaction

Surface engineering is of importance to reduce the reaction barrier of oxygen evolution reaction (OER). Herein, the NiFe Prussian blue analogue (NiFe-PBA)-F catalyst with a multilevel structure was obtained from NiFe-PBAs via a fluorination strategy, which presents an ultralow OER overpotential of 190 mV at 10 mA cm^-2 in alkaline solution, with a small Tafel slope of 57 mV dec^-1 and excellent stability. Interestingly, surface fluorination engineering could achieve a controllable removal of ligands of the cyan group, contributing to keep the framework structure of NiFe-PBAs. Particularly, NiFe-PBAs-F undergoes a dramatic reconstruction with the dynamic migration of F ions, which creates more active sites of F-doped NiFeOOH and affords more favorable adsorption of oxygen intermediates. Density functional theory calculations suggest that F doping increases the state density of Ni 3d orbital around the Fermi level, thus improving the conductivity of NiFeOOH. Furthermore, based on our experimental results, the lattice oxygen oxidation mechanism for NiFe-PBAs-F was proposed. Our work not only provides a new pathway to realize the controllable pyrolysis of NiFe-PBAs but also gives more insights into the reconstruction and the mechanism for the OER process.

An Efficient RuTe2 /Graphene Catalyst for Electrochemical Hydrogen Evolution Reaction in Acid Electrolyte

Developing efficient powder catalysts for hydrogen evolution reaction (HER) in the acidic electrolyte is significant for hydrogen generation in the proton exchange membrane (PEM) water electrolysis technique. Herein, we demonstrated an efficient catalyst for HER in the acid media based on the graphene supported ruthenium telluride nanoparticles (RuTe₂ /Gr). The catalysts were easily fabricated by a facile microwave irradiation/thermal annealing approach, and orthorhombic RuTe₂ crystals were found anchored over the graphene surface. The defective structure was demonstrated in the aberration-corrected transmission electron microscopy images for RuTe₂ crystals and graphene support. This catalyst required an overpotential of 72 mV to drive 10 mA cm^-2 for HER when loading on the inert glass carbon electrode; Excellent catalytic stability in acidic media was also observed to offer 10 mA cm^-2 for 10 hours. The Volmer-Tafel mechanism was indicated on RuTe₂ /Gr catalyst by Tafel slope of 33 mV dec^-1 , similar to that of Pt/C catalysts. The high catalytic performance of RuTe₂ /Gr could be attributed to its high dispersion on the graphene surface, high electrical conductivity and low charge transfer resistance. This powder catalyst has potential application in the PEM water electrolysis technique because of its low cost and high stability.

Fluorine-Doped LiNi0.8Mn0.1Co0.1O2 Cathode for High-Performance Lithium-Ion Batteries

For advanced lithium-ion batteries, LiNixCoyMnzO2 (x + y + z = 1) (NCM) cathode materials containing a high nickel content have been attractive because of their high capacity. However, to solve severe problems such as cation mixing, oxygen evolution, and transition metal dissolution in LiNi0.8Co0.1Mn0.1O2 cathodes, in this study, F-doped LiNi0.8Co0.1Mn0.1O2 (NCMF) was synthesized by solid-state reaction of a NCM and ammonium fluoride, followed by heating process. From X-ray diffraction analysis and X-ray photoelectron spectroscopy, the oxygen in NCM can be replaced by F− ions to produce the F-doped NCM structure. The substitution of oxygen with F− ions may produce relatively strong bonds between the transition metal and F and increase the c lattice parameter of the structure. The NCMF cathode exhibits better electrochemical performance and stability in half- and full-cell tests compared to the NCM cathode.

Efficient nanointerface hybridization in a nickel/cobalt oxide nanorod bundle structure for urea electrolysis

Urea electrolysis has received great attention for the energy-relevant applications, and efficient nanostructured catalysts are required to overcome the sluggish urea oxidation kinetics. Herein, we noticed that the valence state of Ni in the hybrid Ni/Co oxide nanorods can be correlated to the catalytic capability for urea oxidation. Crystal lattice hybridization was found in the interface of Ni/Co oxide nanoparticles that assembled as a nanorod bundle structure. The more or the less of Ni2+/Ni3+ generated lower catalytic ability, and Ni/Co oxide with the optimum content of Ni2+/Ni3+ exhibited the highest catalytic ability for urea oxidation because of the efficient synergism, resulting from the formation of high valence state of Ni species and improved kinetics. A low onset potential of 1.29 V was required for the urea oxidation compared with the high onset potential of 1.52 V for water oxidation; high selectivity for urea oxidation was found in the potential below 1.50 V, and as a promising application for urea-assisted water electrolysis about 190 mV less was required to provide 10 mA cm-2 in the two-electrode system, indicating the energy-efficient nature for hydrogen evolution. The study provides some novel insights into the Ni/Co catalyst design and fabrication with efficient catalytic synergism for electrocatalysis.

Ligand-assisted capping growth of self-supporting ultrathin FeNi-LDH nanosheet arrays with atomically dispersed chromium atoms for efficient electrocatalytic water oxidation

Self-supporting ultrathin FeNi-layered double hydroxide nanosheet arrays with atomically dispersed Cr atoms were firstly fabricated from stainless steel mesh by a facile ligand-assisted capping growth approach. Their unique nanostructure and a strong synergetic effect between the atomically dispersed Cr dopants and the active sites afford an exceptional OER activity.

Engineering Active Fe Sites on Nickel-Iron Layered Double Hydroxide through Component Segregation for Oxygen Evolution Reaction

Nickel-iron layered double hydroxide (NiFe LDH) is a promising oxygen evolution reaction (OER) electrocatalyst under alkaline conditions. Much research has been performed to understand the structure-activity relationship of NiFe LDH under OER conditions. However, the specific role of the Fe species remains unclear and under debate. Herein, based on DFT calculations, it was discovered that the edge Fe sites show higher activity towards OER than either the edge Ni sites or lattice sites. Therefore, a facile acid-etching method was proposed to controllably induce the formation of edge Fe sites in NiFe LDH, and the obtained sample exhibited higher OER activity. X-ray absorption near edge structure and extended X-ray absorption fine structure analyses further revealed that the interaction of the edge Fe species with Ni is believed to contribute to the enhancement of the OER performance. This work provides a new understanding of the structure-activity relationship in NiFe LDH and offers a facile method for the design of efficient electrocatalysts in an alkaline environment.

Overall water-splitting reaction efficiently catalyzed by a novel bi-functional Ru/Ni3N–Ni electrode

The Ru/Ni₃N–Ni catalyst was efficient as a novel bi-functional catalyst for hydrogen and oxygen evolution reactions in water-splitting.

Synergistically boosting the oxygen evolution reaction of an Fe-MOF via Ni doping and fluorination

An efficient approach to boost the oxygen evolution activity of Fe-MOF nanorods was demonstrated by a synergistic strategy of Ni doping and fluorination.