Acceptorless Alcohol Dehydrogenation Catalysed by Pd/C

A Phosphine-Free Air-Stable Mn(II)-Catalyst for Sustainable Synthesis of Quinazolin-4(3H)-ones, Quinolines, and Quinoxalines in Water

The synthesis, characterization, and catalytic application of a new phosphine-free, well-defined, water-soluble, and air-stable Mn(II)-catalyst [Mn(L)(H2O)2Cl](Cl) ([1]Cl) featuring a 1,10-phenanthroline based tridentate pincer ligand, 2-(1H-pyrazol-1-yl)-1,10-phenanthroline (L), in dehydrogenative functionalization of alcohols to various N-heterocycles such as quinazolin-4(3H)-ones, quinolines, and quinoxalines are reported here. A wide array of multisubstituted quinazolin-4(3H)-ones were prepared in water under air following two pathways via the dehydrogenative coupling of alcohols with 2-aminobenzamides and 2-aminobenzonitriles, respectively. 2-Aminobenzyl alcohol and ketones bearing active methylene group were used as coupling partners for synthesizing quinoline derivatives, and various quinoxaline derivatives were prepared by coupling vicinal diols and 1,2-diamines. In all cases, the reaction proceeded smoothly using our Mn(II)-catalyst [1]Cl in water under air, affording the desired N-heterocycles in satisfactory yields starting from cheap and readily accessible precursors. Gram-scale synthesis of the compounds indicates the industrial relevance of our synthetic strategy. Control experiments were performed to understand and unveil the plausible reaction mechanism.

Catalytically Active SiO2 Aerogels Comprising Chelate Complexes of Palladium

A series of silica-based aerogels comprising novel bifunctional chelating ligands was prepared. To produce target aerogels, two aminosilanes, namely (3-aminopropyl)trimethoxysilane (APTMS) and N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTMS), were acylated by natural amino acids ((S)-(+)-2-phenylglycine or L-phenylalanine), followed by gelation and supercritical drying (SCD). Lithium tetrachloropalladate was used as the metal ion source to prepare strong complexes of Pd2+ with amino acids covalently bonded to a silica matrix. Aerogels bearing chelate complexes retain the Pd2+ oxidation state after supercritical drying in CO2, but the Pd ion is reduced to Pd metal after SCD in isopropanol. Depending on the structure of amino complexes, Pd-containing aerogels showed catalytic activity and selectivity in the hydrogenation reactions of C=C, C≡C and C=O bonds.

Creation of a Highly Active Small Cu-Based Catalyst Derived from Copper Aluminium Layered Double Hydroxide Supported on α-Al2 O3 for Acceptorless Alcohol Dehydrogenation

A highly dispersed carbonate-intercalated Cu2+ -Al3+ layered double hydroxide (CuAl LDH) was created on an unreactive α-Al2 O3 surface (CuAl LDH@α-Al2 O3 ) via a simple coprecipitation method of Cu2+ and Al3+ under alkaline conditions in the presence of α-Al2 O3 . A highly reducible CuO nanoparticles was generated, accompanied by the formation of CuAl2 O4 on the surface of α-Al2 O3 (CuAlO@α-Al2 O3 ) after calcination at 1073 K in air, as confirmed by powder X-ray diffraction (XRD) and Cu K-edge X-ray absorption near edge structure (XANES). The structural changes during the progressive heating process were monitored by using in-situ temperature-programmed synchrotron XRD (tp-SXRD). The layered structure of CuAl LDH@α-Al2 O3 completely disappeared at 473 K, and CuO or CuAl2 O4 phases began to appear at 823 K or 1023 K, respectively. Our synthesised CuAlO@α-Al2 O3 catalyst was highly active for the acceptorless dehydrogenation of benzylic, aliphatic, or cyclic aliphatic alcohols; the TON based on the amount of Cu increased to 163 from 3.3 of unsupported CuAlO catalyst in 1-phenylethanol dehydrogenation. The results suggested that Cu0 was obtained from the reduction of CuO in the catalyst matrix during the reaction without separate reduction procedure and acted as a catalytically active species.

Catalytic Acceptorless Dehydrogenation (CAD) of Secondary Benzylic Alcohols into Value-Added Ketones Using Pd(II)-NHC Complexes

For the creation of adaptable carbonyl compounds in organic synthesis, the oxidation of alcohols is a crucial step. As a sustainable alternative to the harmful traditional oxidation processes, transition-metal catalysts have recently attracted a lot of interest in acceptorless dehydrogenation reactions of alcohols. Here, using well-defined, air-stable palladium(II)-NHC catalysts (A-F), we demonstrate an effective method for the catalytic acceptorless dehydrogenation (CAD) reaction of secondary benzylic alcohols to produce the corresponding ketones and molecular hydrogen (H2). Catalytic acceptorless dehydrogenation (CAD) has been successfully used to convert a variety of alcohols, including electron-rich/electron-poor aromatic secondary alcohols, heteroaromatic secondary alcohols, and aliphatic cyclic alcohols, into their corresponding value-added ketones while only releasing molecular hydrogen as a byproduct.

Acceptorless dehydrogenation of alcohols to carboxylic acids by palladium nanoparticles supported on NiO: delving into metal-support cooperation in catalysis

In this work, we have developed a simple NiO-supported Pd nanocatalyst (Pd@NiO) for oxidant-free dehydrogenative oxidation of primary alcohols to carboxylic acids along with hydrogen gas as a byproduct. The catalyst has been characterized by techniques like XRD, HRTEM, SEM-EDX, XPS and ICP-AES. The nanostructured Pd@NiO material showed excellent dehydrogenative oxidation activity and outperformed the activity of free NiO or Pd nanoparticles supported on silica/carbon as a catalyst, which could be attributed to synergistic effect of Pd and NiO. A diverse range of aromatic and aliphatic primary alcohols could be efficiently converted to their corresponding carboxylates in high yields with a catalyst loading as low as 0.08 mol%. Notably, highly challenging biomass derived heterocyclic alcohols such as furfuryl alcohol and piperonyl alcohol can also be efficiently converted to their corresponding acids. Moreover, our catalyst can convert benzyl alcohol to benzoic acid on a gram scale with 89% yield. Interestingly, the H₂ gas liberated in the reaction can also be used as a substrate for the hydrogenation of 3a to 4a in 65% yield. The nanostructured catalyst is highly reusable and no significant decrease in activity was observed after six reaction cycles. A kinetic study revealed that the reaction followed first-order kinetics with a rate constant of k = 1.47 × 10^-4 s^-1, under optimized conditions. The extent of reactivity of different functionalities towards dehydrogenation was also investigated using a Hammett plot showing good linearity.

Iridium-Catalyzed Dehydrogenation in a Continuous Flow Reactor for Practical On-Board Hydrogen Generation From Liquid Organic Hydrogen Carriers

To enable the large-scale use of hydrogen fuel cells for mobility applications, convenient methods for on-board hydrogen storage and release are required. A promising approach is liquid organic hydrogen carriers (LOHCs), since these are safe, available on a large scale, and compatible with existing refueling infrastructure. Usually, LOHC dehydrogenation is carried out in batch-type reactors by transition metals and their complexes and suffers from slow H2 release kinetics and/or inability to reach high energy density by weight, owing to low conversion or the need to dilute the reaction mixture. In this study, a continuous flow reactor is used in combination with a heterogenized iridium pincer complex, which enables a tremendous increase in LOHC dehydrogenation rates. Thus, dehydrogenation of isopropanol is performed in a regime that, in terms of gravimetric energy density, hydrogen generation rate, and precious metal content, is potentially compatible with applications in a fuel-cell powered car.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO₂(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO₂(111). Moreover, two different pathways for the dehydrogenation of CH₃OH to HCHO on the Pd-doped CeO₂(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH₃OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH₃OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd⁴⁺ to Pd²⁺ through the transfer of two electrons can outperform the separated Ce⁴⁺ to Ce³⁺ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.

Atomically Dispersed Co Clusters Anchored on N-doped Carbon Nanotubes for Efficient Dehydrogenation of Alcohols and Subsequent Conversion to Carboxylic Acids

The catalytic dehydrogenation of readily available alcohols to high value-added carbonyl compounds is a research hotspot with scientific significance. Most of the current research about this reaction is performed with noble metal-based homogeneous catalysts of high price and poor reusability. Herein, highly dispersed Co-cluster-decorated N-doped carbon nanotubes (Co/N-CNTs) were fabricated via a facile strategy and used for the dehydrogenation of alcohols with high efficiency. Various characterization techniques confirmed the presence of metallic Co clusters with almost atomic dispersion, and the N-doped carbon supports also enhanced the catalytic activity of Co clusters in the dehydrogenation reaction. Aldehydes as dehydrogenation products were further transformed in situ to carboxylic acids through a Cannizzaro-type pathway under alkaline conditions. The reaction pathway of the dehydrogenation of alcohols was clearly confirmed by theoretical calculations. This work should provide an effective and simple approach for the accurate design and synthesis of small Co-clusters catalysts for the efficient dehydrogenation-based transformation of alcohols to carboxylic acids under mild reaction conditions.

Identification of active catalysts for the acceptorless dehydrogenation of alcohols to carbonyls

Acceptorless dehydrogenation into carbonyls and molecular hydrogen is an attractive strategy to valorize (biobased) alcohols. Using 2-octanol dehydrogenation as benchmark reaction in a continuous reactor, a library of metal-supported catalysts is tested to validate the predictive level of catalytic activity for combined DFT and micro-kinetic modeling. Based on a series of transition metals, scaling relations are determined as a function of two descriptors, i.e. the surface binding energies of atomic carbon and oxygen. Then, a volcano-shape relation based on both descriptors is derived, paving the way to further optimization of active catalysts. Evaluation of 294 diluted alloys but also a series of carbides and nitrides with the volcano map identified 12 promising candidates with potentially improved activity for alcohol dehydrogenation, which provides useful guidance for experimental catalyst design. Further screening identifies β-Mo2N and γ-Mo2N exposing mostly (001) and (100) facets as potential candidates for alcohol dehydrogenation.

Selective oxidation of alcohol-d 1 to aldehyde-d 1 using MnO2

The selective oxidation of alcohol-d₁ to prepare aldehyde-d₁ was newly developed by means of NaBD₄ reduction/activated MnO₂ oxidation. Various aldehyde-d₁ derivatives including aromatic and unsaturated aldehyde-d₁ can be prepared with a high deuterium incorporation ratio (up to 98% D). Halogens (chloride, bromide, and iodide), alkene, alkyne, ester, nitro, and cyano groups in the substrates are tolerated under the mild conditions.

A facile method for deutrium incorporation into aldehydes by mild reduction of NaBD₄ of aldehydes and MnO₂ oxidation (98% D) is disclosed.

Light-Driven Alcohol Splitting by Heterogeneous Photocatalysis: Recent Advances, Mechanism and Prospects

Splitting of alcohols into hydrogen and corresponding carbonyl compounds, also called acceptorless alcohol dehydrogenation, is of great significance for both synthetic chemistry and hydrogen production. Light-Driven Alcohol Splitting (LDAS) by heterogeneous photocatalysis is a promising route to achieve such transformations, and it possesses advantages including high selectivity of the carbonyl compounds, extremely mild reaction conditions (room temperature and irradiation of visible light) and easy separation of the photocatalysts from the reaction mixtures. Because a variety of alcohols can be derived from biomass, LDAS can also be regarded as one of the most sustainable approaches for hydrogen production. In this Review, recent advances in the LDAS catalyzed by the heterogeneous photocatalysts are summarized, focusing on the mechanistic insights for the LDAS and aspects that influence the performance of the photocatalysts from viewpoints of metallic co-catalysts, semiconductors, and metal/semiconductor interfaces. In addition, challenges and prospects have been discussed in order to present a complete picture of this field.

Supported Cobalt Catalysts for Acceptorless Alcohol Dehydrogenation

The acceptor-less dehydrogenation of 2-octanol was tested over cobalt supported on Al₂ O₃ , C, ZnO, ZrO₂ and various TiO₂ substrates. The catalysts were characterized by ICP, XRD and TGA-H₂ . For Co/TiO₂ P25, the effects of passivation, aging (storage at room temperature), and in situ activation under H₂ were investigated. The catalysts must be tested shortly after synthesis in order to prevent deactivation. Cobalt supported on TiO₂ P25 was the most active and 69 % yield of 2-octanone was obtained, using decane as a solvent. Selectivities for 2-octanone were observed in the range of 90 % to 99.9 %. Small amounts of C16 compounds were also formed due to aldol condensation/dehydration reactions. The catalysts exhibited higher conversion in the dehydrogenation of secondary alcohols (65-69 %), in comparison to primary alcohols (2-10 %). The dehydrogenation of 1,2-octanediol led to 1-hydroxy-2-octanone, with a selectivity of 90 % and 69 % for Co/TiO₂ P25 and Co/TiO₂ P90, respectively.

Importance of the decoration in shaped cobalt nanoparticles in the acceptor-less secondary alcohol dehydrogenation

Ligands matter for shaped decorated Co nanoparticles, at the frontier between homogeneous and heterogeneous catalysis.