Sustainable Synthesis of Nanoscale Zerovalent Iron Particles for Environmental Remediation

Plant-Based Phytochemicals for Synthesis of Z-Scheme In2O3/CdS Heterostructures: DFT Analysis and Photocatalytic CO2 Reduction to HCOOH and CO

Photocatalytic CO2 reduction shows potential for mitigating industrial emissions. Z-scheme In2O3/CdS(bio) heterostructures (25 nm, 217.0 m2 g-1 surface area) with a more negative conduction band synthesized using phytochemicals present in Aegle marmelos with short microwave irradiation inhibit CdS(bio) photocorrosion forming SO42-. In2O3/CdS(bio) increased the photocurrent density (0.82 μA cm-2) and CO2 adsorption (0.431 mmol g-1) significantly compared to CdS(bio) and In2O3(bio) NPs. Heterostructures increased decay time and reduced PL intensity by 46.28 and 61.80% over those of CdS(bio) and In2O3(bio) NPs. Density functional theory (DFT)-optimized geometry, band structure analysis, and density of states (DOS) studies indicate that the DOS of CdS is modified with In2O3 incorporation, enhancing charge separation. Optimal 0.4In2O3/CdS(bio) heterostructures exhibit remarkable CO2 conversion to HCOOH/CO production of 514.4/162 μmol g-1 h-1 (AQY 4.44/2.45%), surpassing CdS(bio) and In2O3(bio) by 9 and 6.5 times, and retain their morphological and structural stability. This study provides valuable insight for developing bio-based CdS heterostructures for photocatalytic CO2 reduction.

Environmental remediation approaches by nanoscale zero valent iron (nZVI) based on its reductivity: a review

The fast rise of organic and metallic pollution has brought significant risks to human health and the ecological environment. Consequently, the remediation of wastewater is in extremely urgent demand and has received increasing attention. Nanoscale zero valent iron (nZVI) possesses a high specific surface area and distinctive reactive interfaces, which offer plentiful active sites for the reduction, oxidation, and adsorption of contaminants. Given these abundant functionalities of nZVI, it has undergone significant and extensive studies on environmental remediation, linking to various mechanisms, such as reduction, oxidation, surface complexation, and coprecipitation, which have shown great promise for application in wastewater treatment. Among these functionalities of nZVI, reductivity is particularly important and widely adopted in dehalogenation, and reduction of nitrate, nitro compounds, and metal ions. The following review comprises a short survey of the most recent reports on the applications of nZVI based on its reductivity. It contains five sections, an introduction to the theme, chemical reduction applications, electrolysis-assisted reduction applications, bacterium-assisted reduction applications, and conclusions about the reported research with perspectives for future developments. Review and elaboration of the recent reductivity-dependent applications of nZVI may not only facilitate the development of more effective and sustainable nZVI materials and the protocols for comprehensive utilization of nZVI, but may also promote the exploration of innovative remediation approaches based on its reductivity.

Pyrite-activated persulfate to degrade 3,5,6-trichloro-2-pyridyl in water: Degradation and Fe release mechanism

TCP (3,5,6-trichloro-2-pyridinol), the main recalcitrant degradation product of chlorpyrifos, poses a high risk to human health and ecological systems. This study provided a comprehensive exploration of the pyrite-activated persulfate (PS) system for the removal of TCP in water and placed particular emphasis on the pyrite oxidation process that releases Fe. The results showed that the pyrite-activated PS system can completely degrade TCP within 300 min at 5.0 mmol/L PS and 1000 mg/L pyrite at 25 °C, wherein small amounts of PS (1 mmol/L) can effectively facilitate TCP removal and the oxidation of pyrite elements, while excessive PS (>20 mmol/L) can lead to competitive inhibitory effects, especially in the Fe release process. Aimed at the dual effects, the evident positive correlation (R2 > 0.90) between TCP degradation (kTCP) and Fe element release (kFe), but the value of k (0.00237) in the pyrite addition variable experiment was less than that in the PS experiment (k = 0.00729), further indicating that the inhibition effect of excessive addition consists of PS but not notably pyrite. Moreover, the predominant free radicals and non-free radicals produced in the pyrite/PS system were tested, with the order of significance being •OH < Fe (Ⅳ) < SO4•- < •O2- < 1O2, wherein 1O2 emerged as the principal player in both TCP degradation and Fe release from the pyrite oxidation process. Additionally, CO32- can finitely activate PS but generally slows TCP degradation and inhibit pyrite oxidation releasing Fe process. This study provides a theoretical basis for the degradation of TCP using pyrite-activated PS.

Synthesis and characterization of iron oxide nanoparticles from Lawsonia inermis and its effect on the biodegradation of crude oil hydrocarbon

Crude oil hydrocarbons are considered major environmental pollutants and pose a significant threat to the environment and humans due to having severe carcinogenic and mutagenic effects. Bioremediation is one of the practical and promising technology that can be applied to treat the hydrocarbon-polluted environment. In this present study, rhamnolipid biosurfactant (BS) produced by Pseudomonas aeruginosa PP4 and green synthesized iron nanoparticles (G-FeNPs) from Lawsonia inermis was used to evaluate the biodegradation efficiency (BE) of crude oil. The surface analysis of G-FeNPs was carried out by using FESEM and HRTEM to confirm the size and shape. Further, the average size of the G-FeNPs was observed around 10 nm by HRTEM analysis. The XRD and Raman spectra strongly confirm the presence of iron nanoparticles with their respective peaks. The BE (%) of mixed degradation system-V (PP4+BS+G-FeNPs) was obtained about 82%. FTIR spectrum confirms the presence of major functional constituents (C=O, -CH3, C-O, and OH) in the residual oil content. Overall, this study illustrates that integrated nano-based bioremediation could be an efficient approach for hydrocarbon-polluted environments. This study is the first attempt to evaluate the G-FeNPs with rhamnolipid biosurfactant on the biodegradation of crude oil.

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Combination effect of cold atmospheric plasma with green synthesized zero-valent iron nanoparticles in the treatment of melanoma cancer model

Green synthesized zero-valent iron nanoparticles (nZVI) have high potential in cancer therapy. Cold atmospheric plasma (CAP) is also an emerging biomedical technique that has great potential to cure cancer. Therefore, the combined effect of CAP and nZVI might be promising in treatment of cancer. In this study, we evaluated the combined effect of CAP and nZVI on the metabolic activity of the surviving cells and induction of apoptosis in malignant melanoma in comparison with normal cells. Therefore, the effect of various time exposure of CAP radiation, different doses of nZVI, and the combined effect of CAP and nZVI were evaluated on the viability of malignant melanoma cells (B16-F10) and normal fibroblast cells (L929) at 24 h after treatment using MTT assay. Then, the effect of appropriate doses of each treatment on apoptosis was evaluated by fluorescence microscopy and flow cytometry with Annexin/PI staining. In addition, the expression of BAX, BCL2 and Caspase 3 (CASP3) was also assayed. The results showed although the combined effect of CAP and nZVI significantly showed cytotoxic effects and apoptotic activity on cancer cells, this treatment had no more effective compared to CAP or nZVI alone. In addition, evaluation of gene expression showed that combination therapy didn't improve expression of apoptotic genes in comparison with CAP or nZVI. In conclusion, combined treatment of CAP and nZVI does not seem to be able to improve the effect of monotherapy of CAP or nZVI. It may be due to the resistance of cancer cells to high ROS uptake or the accumulation of saturated ROS in cells, which prevents the intensification of apoptosis.

A recent update on green synthesized iron and iron oxide nanoparticles for environmental applications

Nanotechnology is considered the budding discipline in various fields of science and technology. In this review, the various synthesis methods of iron and iron oxide nanoparticles were summarised with more emphasis on green synthesis - a sustainable and eco-friendly method. The mechanism of green synthesis of these nanomaterials was reviewed in recent literature. The magnetic properties of these nanomaterials were briefed which makes them unique in the family of nanomaterials. An overview of various removal methods for the pollutants such as dye, heavy metals, and emerging contaminants using green synthesized iron and iron oxide nanoparticles is discussed. The mechanism of pollutant removal methods like Fenton-like degradation, photocatalytic degradation, and adsorption techniques was also detailed. The review is concluded with the challenges and possible future aspects of these nanomaterials for various environmental applications.

Molluscicidal and biochemical effects of green-synthesized F-doped ZnO nanoparticles against land snail Monacha cartusiana under laboratory and field conditions

The glass clover snail, Monacha cartusiana (M. cartusiana) is one of the most seriously impacting economic animal pests spreading across Egypt which inflicts severe damages to the agriculture. A green route is developed by deploying an abundant Rosemary plant leaves aqueous extract to synthesize ZnO and F-doped ZnO (F-ZnO) nanoparticles (NPs) that display high molluscicidal activities against the M. cartusiana land snails via leaf dipping and contact techniques. The effect of lethal concentrations, that kills 50% of exposed snails (LC50) value of the treatments, is examined on the activity of alkaline phosphatase (ALP), aspartate aminotransferase (AST), alanine aminotransferase (ALT), enzymes, total protein (TP), total lipids (TL) and cholesterol level of snails, including the histopathological evaluation of the digestive gland and foot of M. Cartusiana. Their molluscicidal activity as poisonous baits under field conditions is also evaluated and compared to the recommended molluscicide, Neomyl. The results show that F^- doping dramatically improves the snail control capability of ZnO NPs, and promotes a considerable increase in both ALT and AST enzymes with an enhancement of TL and Cholesterol levels, but a significant decrease in TP content and ALP activity in treated snails compared to the control group. The LC₅₀ values are found to be 1381.55 and 2197.59 ppm using the leaf dipping for F-ZnO and ZnO, while 237.51 and 245.90 ppm can be achieved using the contact technique, respectively. The greenly synthesized F-ZnO and ZnO NPs induce severe histological alterations in the digestive gland and foot of M. cartusiana, including a complete destruction of the digestive tubules. The histological evaluation of the foot of M. cartusiana exposed to ZnO, shows a rupture of the epithelial layer of the foot sole, while F- ZnO NPs causes the folds of the foot becoming deeper and the rupture of epithelial layer. Our field experiments further demonstrate that F-ZnO achieves 60.08% reduction, while ZnO attains 56.39% diminution in snail population compared to the commercial, Neomyl (69.55%), exhibiting great potentials in controlling the harmful land snail populations.

Biochar-supported nZVI for the removal of Cr(VI) from soil and water: Advances in experimental research and engineering applications

Over the past decade, biochar-supported nZVI composites (nZVI/biochar) have been developed and applied to treat various pollutants due to their excellent physical and chemical properties, especially in the field of chromium (VI) removal. This paper reviewed the factors influencing the preparation and experiments of nZVI/biochar composites, optimization methods, column experimental studies and the mechanism of Cr(VI) removal. The results showed that the difference in raw materials and preparation temperature led to the difference in functional groups and electron transfer capabilities of nZVI/biochar materials. In the experimental process, pH and test temperature can affect the surface chemical properties of materials and involve the electron transfer efficiency. Elemental doping and microbial coupling can effectively improve the performance of nZVI/biochar composites. In conclusion, biochar can stabilize nZVI and enhance electron transfer in nZVI/biochar materials, enabling the composite materials to remove Cr(VI) efficiently. The study of column experiments provides a theoretical basis for applying nZVI/biochar composites in engineering. Finally, the future work prospects of nZVI/biochar composites for heavy metal removal are introduced, and the main challenges and further research directions are proposed.

Significant Mobility of Novel Heteroaggregates of Montmorillonite Microparticles with Nanoscale Zerovalent Irons in Saturated Porous Media

This study conducted laboratory column experiments to systematically examine the transport of novel heteroaggregates of montmorillonite (Mt) microparticles with nanoscale zerovalent irons (nZVIs) in saturated sand at solution ionic strengths (ISs) ranging from 0.001 to 0.2 M. Spherical nZVIs were synthesized using the liquid phase reduction method and were attached on the plate-shaped Mt surfaces in monolayer. While complete deposition occurred for nZVIs in sand, significant transport was observed for Mt-nZVI heteroaggregates at IS ≤ 0.01 M despite the transport decrease with an increasing loading concentration of nZVIs on Mt. The increased mobility of Mt-nZVI heteroaggregates was because the attractions between nZVIs and sand collectors were reduced by the electrostatic repulsions between the Mt and the collector surfaces, which led to a decreased deposition in the sand columns. Complete deposition occurred for the Mt-nZVI heteroaggregates at IS ≥ 0.1 M due to a favorable deposition at Derjaguin–Landau–Verwey–Overbeek (DLVO) primary energy minima. Interestingly, a large fraction of the deposited heteroaggregates was released by reducing IS because of a monotonic decrease of interaction energy with separation distance for the heteroaggregates at low ISs (resulting in repulsive forces), in contrast to the irreversible deposition of nZVIs. Therefore, the fabricated heteroaggregates could also have high mobility in subsurfaces with saline pore water through continuous capture and release using multiple injections of water with low ISs. Our study was the first to examine the transport of heteroaggregates of a plate-like particle with spherical nanoparticles in porous media; the results have important implications in the use of nanoscale zerovalent iron for in situ soil and groundwater remediation.

α-Hydroxy acids modified β-cyclodextrin capped iron nanocatalyst for rapid reduction of nitroaromatics: A sonochemical approach

This study reports a sonochemical approach for the synthesis and catalytic performance of zerovalent iron nanoparticles (nZVI) capped with two cyclodextrin (CD) crosslinked polymers derived from Lactic acid and Citric acid (CDLA and CDCA respectively). The polymers and the catalysts were characterized by NMR, FTIR, HRTEM, DLS, Zeta potential, FESEM, EDAX, VSM, XRD, XPS, TGA analysis. The catalysts proved to be sustainable and recyclable for rapid sonochemical reduction of nitroaromatics under ambient conditions. The isolated yield of the derivatives was found to be greater than 90%. The results suggest excellent dispersibility, stability, high iron content and smaller size of CDLA polymer capped nZVI compared to CDCA capped nZVI, leading to two-fold higher catalytic activity. The effect of various crucial catalysis parameters was investigated and optimized. The scope of the reaction was extended to other nitroaromatics under the optimized conditions. Being magnetically separable, the cost effective and non-toxic catalysts exhibited high recycling efficiency (~13 cycles), high turnover number (TON) and turnover frequency (TOF). The recyclable catalysts could be low-cost and sustainable options for organic transformation in water via sonochemical approach in aqueous medium.

A convenient green protocol for oxidative esterification of arylaldehydes over Pd NPs decorated polyplex encapsulated Fe3O4 microspheres

A mild, competent and eco-friendly protocol has been developed for oxidative esterification of various aldehydes over a post-synthetically modified and Pd fabricated chitosan-starch dual functionalized Fe₃O₄ microspheres as a magnetically isolable heterogeneous and biocompatible nanocatalyst. Molecular O₂ was used as an oxidant in the reaction. A series of aldehydes was directly esterified with MeOH in excellent yields without any pre-activation and involvement of harsh chemicals/conditions. Structural features of the catalyst were assessed through FT-IR, FE-SEM, TEM, EDX, molecular mapping, XRD, VSM and ICP-OES techniques. Due to magnetic core, the catalyst was easily isolated using an external magnet and reused for 8 times in succession, retaining its morphology and catalytic activity.

From Microenvironment Remediation to Novel Anti-Cancer Strategy: The Emergence of Zero Valent Iron Nanoparticles

Accumulated studies indicate that zero-valent iron (ZVI) nanoparticles demonstrate endogenous cancer-selective cytotoxicity, without any external electric field, lights, or energy, while sparing healthy non-cancerous cells in vitro and in vivo. The anti-cancer activity of ZVI-based nanoparticles was anti-proportional to the oxidative status of the materials, which indicates that the elemental iron is crucial for the observed cancer selectivity. In this thematic article, distinctive endogenous anti-cancer mechanisms of ZVI-related nanomaterials at the cellular and molecular levels are reviewed, including the related gene modulating profile in vitro and in vivo. From a material science perspective, the underlying mechanisms are also analyzed. In summary, ZVI-based nanomaterials demonstrated prominent potential in precision medicine to modulate both programmed cell death of cancer cells, as well as the tumor microenvironment. We believe that this will inspire advanced anti-cancer therapy in the future.

Novel analytical expressions for determining van der Waals interaction between a particle and air-water interface: Unexpected stronger van der Waals force than capillary force

HYPOTHESIS

Analytical expressions for calculating Hamaker constant (HC) and van der Waals (VDW) energy/force for interaction of a particle with a solid water interface has been reported for over eighty years. This work further developed novel analytical expressions and numerical approaches for determining HC and VDW interaction energy/force for the particle approaching and penetrating air-water interface (AWI), respectively.

METHODS

The expressions of HC and VDW interaction energy/force before penetrating were developed through analysis of the variation in free energy of the interaction system with bringing the particle from infinity to the vicinity of the AWI. The surface element integration (SEI) technique was modified to calculate VDW energy/force after penetrating.

FINDINGS

We explain why repulsive VDW energy exists inhibiting the particle from approaching the AWI. We found very significant VDW repulsion for a particle at a concave AWI after penetration, which can even exceed the capillary force and cause strong retention in water films on a solid surface and at air-water-solid interface line. The methods and findings of this work are critical to quantification and understanding of a variety of engineered processes such as particle manipulation (e.g., bubble flotation, Pickering emulsion, and particle laden interfaces).

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Remediation and mineralization processes for per- and polyfluoroalkyl substances (PFAS) in water: A review

Per- and polyfluoroalkyl substances (PFAS) are synthetic organic molecules used to manufacture various consumer and industrials products. In PFAS, the CF bond is stable, which renders these compounds chemically stable and prevents their breakdown. Several PFAS treatment processes such as adsorption, photolysis and photocatalysis, bioremediation, sonolysis, electrochemical oxidation, etc., have been explored and are being developed. The present review article has critically summarized degradative technologies and provides in-depth knowledge of photodegradation, electrochemical degradation, chemical oxidation, and reduction mineralization mechanism. Also, novel non-degradative technologies, including nano-adsorbents, natural and surface-modified clay minerals/zeolites, calixarene-based polymers, and molecularly imprinted polymers and adsorbents derived from biomaterials are discussed in detail. Of these novel approaches photocatalysis combined with membrane filtration or electrochemical oxidation via a treatment train approach shows promising results in removing PFAS in natural waters. The photocatalytic mineralization mechanism of PFOA is discussed, leading to recommendations for future research on novel remediation strategies for removing PFAS from water.

Iron-bearing nanoparticles trigger human umbilical vein endothelial cells ferroptotic responses by promoting intracellular iron level

Iron-bearing nanoparticles (IBNPs) were abundant in particulate matter (PM). Due to their high reactivity, IBNPs were considered hazardous to human health, however, their toxic mode-of-action(s) are highly unclear. Ferroptosis is a novel programmed cell death (PCD) that highly associated with intracellular iron. However, the pro-ferroptotic effect of IBNPs has not been characterized. To this end, we ought to investigate whether and how IBNPs (synthetic γ-Fe₂O₃ and Fe₃O₄ NPs were selected as the model compounds) are involved in ferroptosis. We found that human umbilical vein endothelial cells (HUVECs) phagocytized large qualities of γ-Fe₂O₃ and Fe₃O₄ NPs, resulting in increased intracellular iron level. We further observed the disrupted cystine/glutamate reverse transporter (System X_c^-) and glutathione peroxidase 4 (GPX4) signaling in γ-Fe₂O₃ and Fe₃O₄ NPs-challenged HUVECs. γ-Fe₂O₃ and Fe₃O₄ NPs could also cause mitochondrial fusion and fission dysregulation, activate lipid peroxidation and iron metabolism-related genes in a P53-dependent manner. Together, the ferroptotic activity of IBNPs should be acknowledged for the risk assessment of PM associated health effects.

Preparation of Sepiolite Nanofibers Supported Zero Valent Iron Composite Material for Catalytic Removal of Tetracycline in Aqueous Solution

The heavy use of antibiotics in medicine, stock farming and agriculture production has led to their gradual accumulation in environmental media, which poses a serious threat to ecological environment and human safety. As an efficient and promising catalyst for the degradation of antibiotics, nanoscale zero valent iron (nZVI) has attracted increasing attention in recent years. In this study, sepiolite nanofiber supported zero valent iron (nZVI/SEP) composite was prepared via a facile and environmentally friendly method. The nZVI particles (with size of 20–60 nm) were dispersed evenly on the surface of sepiolite nanofibers, and the catalytic performance for the removal of tetracycline hydrochloride (TC-HCl) in aqueous system was investigated. The effect of nZVI loading amount, catalyst dosage, H₂O₂ concentration and pH on the removal efficiency of TC-HCl were studied. It was revealed that the sepiolite supporter effectively inhibited the agglomeration of nZVI particles and increased the contact area between contaminant and the active sites, resulting in the higher catalytic performance than pure nZVI material. The TC-HCl removal efficiency of nZVI/SEP composite was up to 92.67% when TC-HCl concentration of 20 mg/L, catalyst dosage of 1.0 g/L, H₂O₂ concentration of 1.0 mM, pH value of 7. Therefore, the nZVI/SEP composites possess high catalytic activity for TC-HCl removal and have great application prospects in antibiotic wastewater treatment.

A Survey on Analytical Methods for the Characterization of Green Synthesized Nanomaterials

Nowadays, nanotechnologies are well established and the uses of a great variety of nanomaterials show exponential growth. The development of green synthesis procedures experienced a great development thanks to the contribution of researchers of diverse origins. The versatility of green chemistry allows producing a wide range of organic and inorganic nanomaterials with numerous promising applications. In all cases, it is of paramount importance to carefully characterize the resulting nanomaterials because their properties will determine their correct performance to accomplish the function to which they were synthesized or even their detrimental effects like nanotoxicological behavior. This review provides an overview of frequently employed characterization methods and their applications for green synthesized nanomaterials. However, while several different nanoscale materials and their associated green construction methodology are being developed, other important techniques would be extensively incorporated into this field soon. The aim is to encourage researchers in the field to employ a variety of these techniques for achieving an exhaustive characterization of new nanomaterials and for contributing to the development of validated green synthesis procedures.

Green Synthesis of Iron Oxides and Phosphates via Thermal Treatment of Iron Polyphenols Synthesized by a Camellia sinensis Extract

Iron oxide nanoparticles (FeONPs) prepared with plant extracts have been emerging as green and sustainable materials. FeONPs are usually amorphous due to the chelation of the tea polyphenols (TPs) to the iron, and the real nature of the iron compounds is not completely understood. The main goal of this study was to investigate the behavior of the green FeONPs synthesized from an Fe³⁺ salt and Cammelia sinensis (black tea) extract upon thermal treatment, in order to remove TPs and enable the formation of crystalline materials suitable for a thorough characterization and with the potential for diverse applications. The as-prepared FeONPs were assigned as mixed-valence Fe(III) oxyhydroxides and Fe(II)/Fe(III) ions bound to TPs. A detailed description of the phase transformation upon heating revealed the formation of the rare nano β-Fe₂O₃ phase at 400 °C, followed by a transformation to α-Fe₂O₃ as the temperature increased. Above 600 °C, the unprecedented formation of FePO₄ and Fe₃PO₇ was observed, produced from the reaction of Fe₂O₃ and free phosphate ions present in the black tea leaves, Fe₃PO₇ being the major phase obtained at 900 °C. Finally, the catalytic potential of the FeONPs to treat the azo dye methyl orange through a heterogeneous Fenton-like system was investigated.

Nano-remediation of toxic heavy metal contamination: Hexavalent chromium [Cr(VI)]

The inexorable industrialization and modern agricultural practices to meet the needs of the increasing population have polluted the environment with toxic heavy metals such as Cr(VI), Cu²⁺, Cd²⁺, Pb^2+, and Zn²⁺. Among the hazardous heavy metal(loid)s contamination in agricultural soil, water, and air, hexavalent chromium [Cr(VI)] is the most virulent carcinogen. The metallurgic industries, tanneries, paint manufacturing, petroleum refineries are among various such human activities that discharge Cr(VI) into the environment. Various methods have been employed to reduce the concentration of Cr(VI) contamination with nano and bioremediation being the recent advancement to achieve recovery at low cost and higher efficiency. Bioremediation is the process of using biological sources such as plant extracts, microorganisms, and algae to reduce the heavy metals while the nano-remediation uses nanoparticles to adsorb heavy metals. In this review, we discuss the various activities that liberate Cr(VI). We then discuss the various conventional, nano-remediation, and bioremediation methods to keep Cr(VI) concentration in check and further discuss their efficiencies. We also discuss the mechanism of nano-remediation techniques for better insight into the process.