Crystalline Copper Selenide as a Reliable Non-Noble Electro(pre)catalyst for Overall Water Splitting

Structural and Electronic Factors behind the Electrochemical Stability of 3D-Metal Tungstates under Oxygen Evolution Reaction Conditions

Transition metal tungstates (TMTs) possess a wolframite-like lattice structure and preferably form via an electrostatic interaction between a divalent transition metal cation (MII) and an oxyanion of tungsten ([WO4]2-). A unit cell of a TMT is primarily composed of two repeating units, [MO6]oh and [WO6]oh, which are held together via several M-μ2-O-W bridging links. The bond character (ionic or covalent) of this bridging unit determines the stability of the lattice and influences the electronic structure of the bulk TMT materials. Recently, TMTs have been successfully employed as an electrode material for various applications, including electrochemical water splitting. Despite the wide electrocatalytic applications of TMTs, the study of the structure-activity correlation and electronic factors responsible for in situ structural evolution to electroactive species during electrochemical reactions is still in its infancy. Herein, a series of TMTs, MIIWVIO4 (M = Mn/Fe/Co/Ni), have been prepared and employed as electrocatalysts to study the oxygen evolution reaction (OER) under alkaline conditions and to scrutinize the role of transition metals in controlling the energetics of the formation of electroactive species. Since the [WO6]oh unit is common in the TMTs considered, the variation of the central atom of the corresponding [MO6]oh unit plays an intriguing role in controlling the electronic structure and stability of the lattice under anodic potential. Under the OER conditions, a potential-dependent structural transformation of MWO4 is noticed, where MnWO4 appears to be the most labile, whereas NiWO4 is stable up to a high anodic potential of ∼1.68 V (vs RHE). Potential-dependent hydrolytic [WO4]2- dissolution to form MOx active species, traced by in situ Raman and various spectro-/microscopic analyses, can directly be related to the electronic factors of the lattice, viz., crystal field splitting energy (CFSE) of MII in [MO6]oh, formation enthalpy (ΔHf), decomposition enthalpy (ΔHd), and Madelung factor associated with the MWO4 ionic lattice. Additionally, the magnitude of the Löwdin and Bader charges on M of the M-μ2-O-W bond is directly related to the degree of ionicity or covalency in the MWO4 lattice, which indirectly influences the electronic structure and activity. The experimental results substantiated by the computational study explain the electrochemical activity of the TMTs with the help of various structural and electronic factors and bonding interactions in the lattice, which has never been realized. Therefore, the study presented here can be taken as a general guideline to correlate the reactivity to the structure of the inorganic materials.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Nickel Nanoparticles Protruding from Molybdenum Carbide Micropillars with Carbon Layer-Protected Biphasic 0D/1D Heterostructures for Efficient Water Splitting

It remains a tremendous challenge to achieve high-efficiency bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) for hydrogen production by water splitting. Herein, a novel hybrid of 0D nickel nanoparticles dispersed on the one-dimensional (1D) molybdenum carbide micropillars embedded in the carbon layers (Ni/Mo2C@C) was successfully prepared on nickel foam by a facile pyrolysis strategy. During the synthesis process, the nickel nanoparticles and molybdenum carbide were simultaneously generated under H2 and C2H2 mixed atmospheres and conformally encapsulated in the carbon layers. Benefiting from the distinctive 0D/1D heterostructure and the synergistic effect of the biphasic Mo2C and Ni together with the protective effect of the carbon layer, the reduced activation energy barriers and fast catalytic reaction kinetics can be achieved, resulting in a small overpotential of 96 mV for the HER and 266 mV for the OER at the current density of 10 mA cm-2 together with excellent durability in 1.0 M KOH electrolyte. In addition, using the developed Ni/Mo2C@C as both the cathode and anode, the constructed electrolyzer exhibits a small voltage of 1.55 V for the overall water splitting. The novel designed Ni/Mo2C@C may give inspiration for the development of efficient bifunctional catalysts with low-cost transition metal elements for water splitting.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Anion-modulated CoP electrode as bifunctional electrocatalyst for anion-exchange membrane hydrazine-assisted water electrolyser

The hydrazine oxidation reaction (HzOR) is considered as a promising alternative process of the oxygen evolution reaction (OER) to realize more energy-efficient hydrogen generation. However, the lack of highly active bifunctional catalysts poses a huge challenge to this strategy. In this work, we report a novel and universal electrodeposition strategy to rationally synthesize a self-supporting electrode. The utilization of ammonium fluoride helps to modulate not only the morphology of CoP, but also the synchronous formation of an anion-modified structure, leading to an excellent bifunctional performance. The optimal F-CoP/CF exhibits small potentials of -90 mV and 41 mV at 1 A cm-2, high stability and low Tafel slopes of 28 mV dec-1 and 3.26 mV dec-1 for the HER and HzOR, respectively. The highly efficient and stable bifunctional activity of F-CoP/CF can be further confirmed in an anion-exchange membrane hydrazine-assisted water electrolyzer (0.49 V at 1 A cm-2). Utilizing the density functional theory calculations, the optimized adsorption energy of water molecules and hydrogen intermediates of the HER as well as the rate-determining step of the HzOR are demonstrated for the F-CoP.

Copper removal and recovery from electroplating effluent with wide pH ranges through hybrid capacitive deionization using CuSe electrode

In modern industry, selective extraction and recovery of Cu from strongly acidic electroplating effluent are crucial to reduce carbon emissions, alleviate resource scarcity, and mitigate water pollution, yielding considerable economic and environmental benefits. This study proposed a high-efficiency CuSe electrode to selectively remove Cu from electroplating effluent via hybrid capacitive deionization (HCDI). The potential of this electrode was thoroughly evaluated to assess its effectiveness. The CuSe electrode exhibited superior deionization performance in terms of Cu adsorption capacity, selectivity, and applicability in various water matrices. Specifically, under strong acid conditions (1 M H⁺), the CuSe electrode maintained an optimal adsorption capacity of 357.36 mg g^-1 toward Cu²⁺. In systems containing salt ions, heavy metals, and actual electroplating wastewater, the CuSe electrode achieved a remarkable removal efficiency of up to 90% for Cu²⁺ with a high distribution coefficient K_d. Notably, the capacitive deionization (CDI) system demonstrated the simultaneous removal of Cu-EDTA. The removal mechanism was further revealed using ex-situ X-ray diffraction and X-ray photoelectron spectroscopy analyses. Overall, this study presents a practical approach that extends the capabilities of CDI platforms for effectively removing and recovering Cu from acidic electroplating effluent.

A Challenge toward Novel Quaternary Sulfides SrLnCuS3 (Ln = La, Nd, Tm): Unraveling Synthetic Pathways, Structures and Properties

We report on the novel heterometallic quaternary sulfides SrLnCuS₃ (Ln = La, Nd, Tm), obtained as both single crystals and powdered samples. The structures of both the single crystal and powdered samples of SrLaCuS₃ and SrNdCuS₃ belong to the orthorhombic space group Pnma but are of different structural types, while both samples of SrTmCuS₃ crystallize in the orthorhombic space group Cmcm with the structural type KZrCuS₃. Three-dimensional crystal structures of SrLaCuS₃ and SrNdCuS₃ are formed from the (Sr/Ln)S₇ capped trigonal prisms and CuS₄ tetrahedra. In SrLaCuS₃, alternating 2D layers are stacked, while the main backbone of the structure of SrNdCuS₃ is a polymeric 3D framework [(Sr/Ln)S₇]_n, strengthened by 1D polymeric chains (CuS₄)_n with 1D channels, filled by the other Sr²⁺/Ln³⁺ cations, which, in turn, form 1D dimeric ribbons. A 3D crystal structure of SrTmCuS₃ is constructed from the SrS₆ trigonal prisms, TmS₆ octahedra and CuS₄ tetrahedra. The latter two polyhedra are packed together into 2D layers, which are separated by 1D chains (SrS₆)_n and 1D free channels. In both crystal structures of SrLaCuS₃ obtained in this work, the crystallographic positions of strontium and lanthanum were partially mixed, while only in the structure of SrNdCuS₃, solved from the powder X-ray diffraction data, were the crystallographic positions of strontium and neodymium partially mixed. Band gaps of SrLnCuS₃ (Ln = La, Nd, Tm) were found to be 1.86, 1.94 and 2.57 eV, respectively. Both SrNdCuS₃ and SrTmCuS₃ were found to be paramagnetic at 20–300 K, with the experimental magnetic characteristics being in good agreement with the corresponding calculated parameters.

Efficient Charge Transfers in Highly Conductive Copper Selenide Quantum Dot-Confined Catalysts for Robust Oxygen Evolution Reaction

Defective quantum dots (QDs) are the emerging materials for catalysis by virtue of their atomic-scale size, high monodispersity, and ultra-high specific surface area. However, the dispersed nature of QDs fundamentally prohibits the efficient charge transfer in various catalytic processes. Here, we report efficient and robust electrocatalytic oxygen evolution based on defective and highly conductive copper selenide (CuSe) QDs confined in an amorphous carbon matrix with good uniformity (average diameter 4.25 nm) and a high areal density (1.8 × 10¹² cm^-2). The CuSe QD-confined catalysts with abundant selenide vacancies were prepared by using a pulsed laser deposition system benefitted by high substrate temperature and ultrahigh vacuum growth conditions, as evidenced by electron paramagnetic resonance characterizations. An ultra-low charge transfer resistance (about 7 Ω) determined by electrochemical impedance spectroscopy measurement indicates the efficient charge transfer of CuSe quantum-confined catalysts, which is guaranteed by its high conductivity (with a low resistivity of 2.33 μΩ·m), as revealed by electrical transport measurements. Our work provides a universal design scheme of the dispersed QD-based composite catalysts and demonstrates the CuSe QD-confined catalysts as an efficient and robust electrocatalyst for oxygen evolution reaction.

Intrinsic Lability of NiMoO4 to Excel the Oxygen Evolution Reaction

Nickel-based bimetallic oxides such as NiMoO₄ and NiWO₄, when deposited on the electrode substrate, show remarkable activity toward the electrocatalytic oxygen evolution reaction (OER). The stability of such nanostructures is nevertheless speculative, and catalytically active species have been less explored. Herein, NiMoO₄ nanorods and NiWO₄ nanoparticles are prepared via a solvothermal route and deposited on nickel foam (NF) (NiMoO₄/NF and NiWO₄/NF). After ensuring the chemical and structural integrity of the catalysts on electrodes, an OER study has been performed in the alkaline medium. After a few cyclic voltammetry (CV) cycles within the potential window of 1.0-1.9 V (vs reversible hydrogen electrode (RHE)), ex situ Raman analysis of the electrodes infers the formation of NiO(OH)_ED (ED: electrochemically derived) from NiMoO₄ precatalyst, while NiWO₄ remains stable. A controlled study, stirring of NiMoO₄/NF in 1 M KOH without applied potential, confirms that NiMoO₄ hydrolyzes to the isolable NiO, which under a potential bias converts into NiO(OH)_ED. Perhaps the more ionic character of the Ni-O-Mo bond in the NiMoO₄ compared to the Ni-O-W bond in NiWO₄ causes the transformation of NiMoO₄ into NiO(OH)_ED. A comparison of the OER performance of electrochemically derived NiO(OH)_ED, NiWO₄, ex-situ-prepared Ni(OH)₂, and NiO(OH) confirmed that in-situ-prepared NiO(OH)_ED remained superior with a substantial potential of 238 (±6) mV at 20 mA cm^-2. The notable electrochemical performance of NiO(OH)_ED can be attributed to its low Tafel slope value (26 mV dec^-1), high double-layer capacitance (C_dl, 1.21 mF cm^-2), and a low charge-transfer resistance (R_ct, 1.76 Ω). The NiO(OH)_ED/NF can further be fabricated as a durable OER anode to deliver a high current density of 25-100 mA cm^-2. Post-characterization of the anode proves the structural integrity of NiO(OH)_ED even after 12 h of chronoamperometry at 1.595 V (vs reversible hydrogen electrode (RHE)). The NiO(OH)_ED/NF can be a compatible anode to construct an overall water splitting (OWS) electrolyzer that can operate at a cell potential of 1.64 V to reach a current density of 10 mA cm^-2. Similar to that on NF, NiMoO₄ deposited on iron foam (IF) and carbon cloth (CC) also electrochemically converts into NiO(OH) to perform a similar OER activity. This work understandably demonstrates monoclinic NiMoO₄ to be an inherently unstable electro(pre)catalyst, and its structural evolution to polycrystalline NiO(OH)_ED succeeding the NiO phase is intrinsic to its superior activity.

Flowery ln2MnSe4 Novel Electrocatalyst Developed via Anion Exchange Strategy for Efficient Water Splitting

Oxygen and hydrogen generated by water electrolysis may be utilized as a clean chemical fuel with high gravimetric energy density and energy conversion efficiency. The hydrogen fuel will be the alternative to traditional fossil fuels in the future, which are near to exhaustion and cause pollution. In the present study, flowery-shaped In₂MnSe₄ nanoelectrocatalyst is fabricated by anion exchange reaction directly grown on nickel foam (NF) in 1.0 M KOH medium for oxygen evolution reaction (OER). The physiochemical and electrical characterization techniques are used to investigate the chemical structure, morphology, and electrical properties of the In₂MnSe₄ material. The electrochemical result indicates that synthesized material exhibits a smaller value of Tafel slope (86 mV/dec), lower overpotential (259 mV), and high stability for 37 h with small deterioration in the current density for a long time. Hence, the fabricated material responds with an extraordinary performance for the OER process and for many other applications in the future.

The Pivotal Role of s-, p-, and f-Block Metals in Water Electrolysis: Status Quo and Perspectives

Transition metals, in particular noble metals, are the most common species in metal-mediated water electrolysis because they serve as highly active catalytic sites. In many cases, the presence of nontransition metals, that is, s-, p-, and f-block metals with high natural abundance in the earth-crust in the catalytic material is indispensable to boost efficiency and durability in water electrolysis. This is why alkali metals, alkaline-earth metals, rare-earth metals, lean metals, and metalloids receive growing interest in this research area. In spite of the pivotal role of these nontransition metals in tuning efficiency of water electrolysis, there is far more room for developments toward a knowledge-based catalyst design. In this review, five classes of nontransition metals species which are successfully utilized in water electrolysis, with special emphasis on electronic structure-catalytic activity relationships and phase stability, are discussed. Moreover, specific fundamental aspects on electrocatalysts for water electrolysis as well as a perspective on this research field are also addressed in this account. It is anticipated that this review can trigger a broader interest in using s-, p-, and f-block metals species toward the discovery of advanced polymetal-containing electrocatalysts for practical water splitting.

Electrochemically Derived Crystalline CuO from Covellite CuS Nanoplates: A Multifunctional Anode Material

In the present era, electrochemical water splitting has been showcased as a reliable solution for alternative and sustainable energy development. The development of a cheap, albeit active, catalyst to split water at a substantial overpotential with long durability is a perdurable challenge. Moreover, understanding the nature of surface-active species under electrochemical conditions remains fundamentally important. A facile hydrothermal approach is herein adapted to prepare covellite (hexagonal) phase CuS nanoplates. In the covellite CuS lattice, copper is present in a mixed-valent state, supported by two different binding energy values (932.10 eV for Cu^I and 933.65 eV for Cu^II) found in X-ray photoelectron spectroscopy analysis, and adopted two different geometries, that is, trigonal planar preferably for Cu^I and tetrahedral preferably for Cu^II. The as-synthesized covellite CuS behaves as an efficient electro(pre)catalyst for alkaline water oxidation while deposited on a glassy carbon and nickel foam (NF) electrodes. Under cyclic voltammetry cycles, covellite CuS electrochemically and irreversibly oxidized to CuO, indicated by a redox feature at 1.2 V (vs the reversible hydrogen electrode) and an ex situ Raman study. Electrochemically activated covellite CuS to the CuO phase (termed as CuS_EA) behaves as a pure copper-based catalyst showing an overpotential (η) of only 349 (±5) mV at a current density of 20 mA cm^-2, and the TOF value obtained at η₃₄₉ (at 349 mV) is 1.1 × 10^-3 s^-1. A low R_ct of 5.90 Ω and a moderate Tafel slope of 82 mV dec^-1 confirm the fair activity of the CuS_EA catalyst compared to the CuS precatalyst, reference CuO, and other reported copper catalysts. Notably, the CuS_EA/NF anode can deliver a constant current of ca. 15 mA cm^-2 over a period of 10 h and even a high current density of 100 mA cm^-2 for 1 h. Post-oxygen evolution reaction (OER)-chronoamperometric characterization of the anode via several spectroscopic and microscopic tools firmly establishes the formation of crystalline CuO as the active material along with some amorphous Cu(OH)₂ via bulk reconstruction of the covellite CuS under electrochemical conditions. Given the promising OER activity, the CuS_EA/NF anode can be fabricated as a water electrolyzer, Pt(-)//(+)CuS_EA/NF, that delivers a j of 10 mA cm^-2 at a cell potential of 1.58 V. The same electrolyzer can further be used for electrochemical transformation of organic feedstocks like ethanol, furfural, and 5-hydroxymethylfurfural to their respective acids. The present study showcases that a highly active CuO/Cu(OH)₂ heterostructure can be constructed in situ on NF from the covellite CuS nanoplate, which is not only a superior pure copper-based electrocatalyst active for OER and overall water splitting but also for the electro-oxidation of industrial feedstocks.

Quaternary Selenides EuLnCuSe3: Synthesis, Structures, Properties and In Silico Studies

In this work, we report on the synthesis, in-depth crystal structure studies as well as optical and magnetic properties of newly synthesized heterometallic quaternary selenides of the Eu⁺²Ln⁺³Cu⁺¹Se₃ composition. Crystal structures of the obtained compounds were refined by the derivative difference minimization (DDM) method from the powder X-ray diffraction data. The structures are found to belong to orthorhombic space groups Pnma (structure type Ba₂MnS₃ for EuLaCuSe₃ and structure type Eu₂CuS₃ for EuLnCuSe₃, where Ln = Sm, Gd, Tb, Dy, Ho and Y) and Cmcm (structure type KZrCuS₃ for EuLnCuSe₃, where Ln = Tm, Yb and Lu). Space groups Pnma and Cmcm were delimited based on the tolerance factor t', and vibrational spectroscopy additionally confirmed the formation of three structural types. With a decrease in the ionic radius of Ln³⁺ in the reported structures, the distortion of the (LnCuSe₃) layers decreases, and a gradual formation of the more symmetric structure occurs in the sequence Ba₂MnS₃ → Eu₂CuS₃ → KZrCuS₃. According to magnetic studies, compounds EuLnCuSe₃ (Ln = Tb, Dy, Ho and Tm) each exhibit ferrimagnetic properties with transition temperatures ranging from 4.7 to 6.3 K. A negative magnetization effect is observed for compound EuHoCuSe₃ at temperatures below 4.8 K. The magnetic properties of the discussed selenides and isostructural sulfides were compared. The direct optical band gaps for EuLnCuSe₃, subtracted from the corresponding diffuse reflectance spectra, were found to be 1.87-2.09 eV. Deviation between experimental and calculated band gaps is ascribed to lower d states of Eu²⁺ in the crystal field of EuLnCuSe₃, while anomalous narrowing of the band gap of EuYbCuSe₃ is explained by the low-lying charge-transfer state. Ab initio calculations of the crystal structures, elastic properties and phonon spectra of the reported compounds were performed.

Efficient pollutant degradation under ultraviolet to near-infrared light irradiation and dark condition using CuSe nanosheets: Mechanistic insight into degradation

The hydrothermally prepared two-dimensional copper selenide nanosheets (2D CuSe NSs) have been employed for the first time to degrade rhodamine B (RhB) in the presence of hydrogen peroxide (H₂O₂) under ultraviolet to near-infrared (NIR) light irradiation and dark condition. The experimental measurements demonstrate that 99.7% RhB is degraded under NIR light irradiation for 120 min. Moreover, the experimental tests clearly demonstrate that the 2D CuSe NSs display excellent ability to degrade RhB under dark condition. The different degradation mechanisms under the light irradiation and dark condition have been revealed by the experimental tests through the investigation of H₂O₂ role and the evaluation of hydroxyl radicals (•OH) and H₂O₂ concentration during the degradation reaction. Under light irradiation, the H₂O₂ traps the photogenerated electrons of the CuSe to generate •OH and hydroxide ion (OH^-), and the holes react with OH^- to produce •OH, making RhB to be degraded efficiently. Under dark conduction, the 2D CuSe NSs react with H₂O₂ to exhibit Fenton-like process to degrade RhB with a degradation rate of 90.0% within 120 min. This work opens a pathway for developing nanostructures with full-solar-responsive and strong near-infrared photocatalytic activity as well as Fenton-like reaction to efficiently degrade pollutants under light irradiation and dark condition.

γ-FeO(OH) with Multi-surface Terminations Intrinsically Active for Electrocatalytic Oxygen Evolution Reaction

Due to poor conductivity, electrocatalytic performance of independently prepared iron oxy-hydroxide (FeO(OH)) is inferior whereas in-situ derived FeO(OH) from the iron based electro(pre)catalyst shows superior oxygen evolution reaction (OER). Use...

Air-Stable Mn doped CuCl/CuO Hybrid Triquetrous Nanoarrays as Bifunctional Electrocatalysts for Overall Water Splitting

The development of highly efficient non-precious metal catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is key for large-scale hydrogen evolution through water splitting technology. Here, we report an air-stable Cu-based nanostructure consisting of Mn doped CuCl and CuO (CuCl/CuO(Mn)-NF) as a dual functional electrocatalyst for water splitting. CuCl is identified as the main active component, together with Mn doping and the synergistic effect between CuCl and CuO are found to make responsibility for the excellent OER and HER catalytic activity and stability. The assembled electrolyzes also exhibit decent water splitting performance. This work not only provides a simple method for preparing Cu-based composite catalyst, but also demonstrates the great potential of Cu-based non-noble metal electrocatalysts for water splitting and other renewable energy conversion technologies.

Bifunctional Catalyst Derived from Sulfur-Doped VMoOx Nanolayer Shelled Co Nanosheets for Efficient Water Splitting

A novel sulfur-doped vanadium-molybdenum oxide nanolayer shelling over two-dimensional cobalt nanosheets (2D Co@S-VMoO_x NSs) was synthesized via a facile approach. The formation of such a unique 2D core@shell structure together with unusual sulfur doping effect increased the electrochemically active surface area and provided excellent electric conductivity, thereby boosting the activities for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). As a result, only low overpotentials of 73 and 274 mV were required to achieve a current response of 10 mA cm^-2 toward HER and OER, respectively. Using the 2D Co@S-VMoO_x NSs on nickel foam as both cathode and anode electrode, the fabricated electrolyzer showed superior performance with a small cell voltage of 1.55 V at 10 mA cm^-2 and excellent stability. These results suggested that the 2D Co@S-VMoO_x NSs material might be a potential bifunctional catalyst for green hydrogen production via electrochemical water splitting.

Strategies and Perspectives to Catch the Missing Pieces in Energy-Efficient Hydrogen Evolution Reaction in Alkaline Media

Transition metal hydroxides (M-OH) and their heterostructures (X|M-OH, where X can be a metal, metal oxide, metal chalcogenide, metal phosphide, etc.) have recently emerged as highly active electrocatalysts for hydrogen evolution reaction (HER) of alkaline water electrolysis. Lattice hydroxide anions in metal hydroxides are primarily responsible for observing such an enhanced HER activity in alkali that facilitate water dissociation and assist the first step, the hydrogen adsorption. Unfortunately, their poor electronic conductivity had been an issue of concern that significantly lowered its activity. Interesting advancements were made when heterostructured hydroxide materials with a metallic and or a semiconducting phase were found to overcome this pitfall. However, in the midst of recently evolving metal chalcogenide and phosphide based HER catalysts, significant developments made in the field of metal hydroxides and their heterostructures catalysed alkaline HER and their superiority have unfortunately been given negligible attention. This review, unlike others, begins with the question of why alkaline HER is difficult and will take the reader through evaluation perspectives, trends in metals hydroxides and their heterostructures catalysed HER, an understanding of how alkaline HER works on different interfaces, what must be the research directions of this field in near future, and eventually summarizes why metal hydroxides and their heterostructures are inevitable for energy-efficient alkaline HER.

Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction

A climax in the development of cost-effective and high-efficiency transition metal-based electrocatalysts has been witnessed recently for sustainable energy and related conversion technologies. In this regard, structure-activity relationships based on several descriptors have already been proposed to rationally design electrocatalysts. However, the dynamic reconstruction of the surface structures and compositions of catalysts during electrocatalytic water oxidation, especially during the anodic oxygen evolution reaction (OER), complicate the streamlined prediction of the catalytic activity. With the achievements in operando and in situ techniques, it has been found that electrocatalysts undergo surface reconstruction to form the actual active species in situ accompanied with an increase in their oxidation state during OER in alkaline solution. Accordingly, a thorough understanding of the surface reconstruction process plays a critical role in establishing unambiguous structure-composition-property relationships in pursuit of high-efficiency electrocatalysts. However, several issues still need to be explored before high electrocatalytic activities can be realized, as follows: (1) the identification of initiators and pathways for surface reconstruction, (2) establishing the relationships between structure, composition, and electrocatalytic activity, and (3) the rational manipulation of in situ catalyst surface reconstruction. In this review, the recent progress in the surface reconstruction of transition metal-based OER catalysts including oxides, non-oxides, hydroxides and alloys is summarized, emphasizing the fundamental understanding of reconstruction behavior from the original precatalysts to the actual catalysts based on operando analysis and theoretical calculations. The state-of-the-art strategies to tailor the surface reconstruction such as substituting/doping with metals, introducing anions, incorporating oxygen vacancies, tuning morphologies and exploiting plasmonic/thermal/photothermal effects are then introduced. Notably, comprehensive operando/in situ characterization together with computational calculations are responsible for unveiling the improvement mechanism for OER. By delivering the progress, strategies, insights, techniques, and perspectives, this review will provide a comprehensive understanding of the surface reconstruction in transition metal-based OER catalysts and future guidelines for their rational development.

Perspective on intermetallics towards efficient electrocatalytic water-splitting

Intermetallic compounds exhibit attractive electronic, physical, and chemical properties, especially in terms of a high density of active sites and enhanced conductivity, making them an ideal class of materials for electrocatalytic applications. Nevertheless, widespread use of intermetallics for such applications is often limited by the complex energy-intensive processes yielding larger particles with decreased surface areas. In this regard, alternative synthetic strategies are now being explored to realize intermetallics with distinct crystal structures, morphology, and chemical composition to achieve high performance and as robust electrode materials. In this perspective, we focus on the recent advances and progress of intermetallics for the reaction of electrochemical water-splitting. We first introduce fundamental principles and the evaluation parameters of water-splitting. Then, we emphasize the various synthetic methodologies adapted for intermetallics and subsequently, discuss their catalytic activities for water-splitting. In particular, importance has been paid to the chemical stability and the structural transformation of the intermetallics as well as their active structure determination under operating water-splitting conditions. Finally, we describe the challenges and future opportunities to develop novel high-performance and stable intermetallic compounds that can hold the key to more green and sustainable economy and rise beyond the horizon of water-splitting application.

NiCo-Layered Double Hydroxide-Derived B-Doped CoP/Ni2P Hollow Nanoprisms as High-Efficiency Electrocatalysts for Hydrogen Evolution Reaction

Rational design and controllable synthesis of multiple metal components according to chemical composition and morphology are essential for obtaining desirable electrochemical performance for efficient hydrogen production because of the morphology and synergistic effects of different components. Herein, we report an approach to facilely fabricate bimetal compounds with a well-defined hollow nanoprism structure using a self-templated strategy to synthesize novel hierarchical NiCo-layered double hydroxide (NiCo-LDH) nanosheets as precursors followed by in situ phosphorization. Among the as-synthesized products of different mole ratios of Ni/Co, the NiCo₂-B-P nanoprisms that integrate the advantages of a hollow structure, an optimal Ni-Co synergistic effect, and a unique B-doped CoP/Ni₂P bimetallic phosphide derived from NiCo-LDH nanosheets exhibit excellent hydrogen evolution reaction (HER) activity in an alkaline solution at 10 mA cm^-2 with the lowest overpotential of 78 mV and long-term stability. This study may offer an appropriate structure and compositional design of bimetallic alkaline HER catalysts.

Facile Access to an Active γ-NiOOH Electrocatalyst for Durable Water Oxidation Derived From an Intermetallic Nickel Germanide Precursor

Identifying novel classes of precatalysts for the oxygen evolution reaction (OER by water oxidation) with enhanced catalytic activity and stability is a key strategy to enable chemical energy conversion. The vast chemical space of intermetallic phases offers plenty of opportunities to discover OER electrocatalysts with improved performance. Herein we report intermetallic nickel germanide (NiGe) acting as a superior activity and durable Ni-based electro(pre)catalyst for OER. It is produced from a molecular bis(germylene)-Ni precursor. The ultra-small NiGe nanocrystals deposited on both nickel foam and fluorinated tin oxide (FTO) electrodes showed lower overpotentials and a durability of over three weeks (505 h) in comparison to the state-of-the-art Ni-, Co-, Fe-, and benchmark NiFe-based electrocatalysts under identical alkaline OER conditions. In contrast to other Ni-based intermetallic precatalysts under alkaline OER conditions, an unexpected electroconversion of NiGe into γ-NiIII OOH with intercalated OH- /CO3 2- transpired that served as a highly active structure as shown by various ex situ methods and quasi in situ Raman spectroscopy.

Boron carbonitride with tunable B/N Lewis acid/base sites for enhanced electrocatalytic overall water splitting

In-depth research on energy storage and conversion is urgently needed; thus, water splitting has become a possible method to achieve sustainable energy utilization. However, traditional carbon material with high graphitization degree exhibits a relatively low electrocatalytic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activity as it is electrochemically inert. In this work, according to the Lewis theory of acids and bases and the density functional theory (DFT) results, which show that the enriched heteroatom of B/N in the boron carbonitride (BCN) system may introduce stronger adsorption strength of OH*/H₂O, respectively, we have designed and synthesized self-supporting BCN materials with different enrichment degrees of B/N (B-BCN/N-BCN) using carbon paper as substrate. Furthermore, by adjusting the contents of B and N, the optimum electrocatalytic performance of overall water splitting was obtained in which the onset voltage of water splitting on B-BCN//N-BCN was lower than 1.60 V. Our strategy of synthesizing materials with different heteroatom enrichment to improve the electronic environment of materials has opened up new opportunities for developing efficient metal-free electrocatalysts.

Investigation on nanostructured Cu-based electrocatalysts for improvising water splitting: a review

In this review, various forms of Cu based nanostructures have been explored in terms of improvise and enhancing their activity and durability with vast investigation for OER, HER and TWS applications.

Surface Atom Regulation on Polyoxometalate Electrocatalyst for Simultaneous Low-Voltage H2 Production and Phenol Degradation

The electrocatalytic hydrogen evolution reaction is an ideal method for H₂ production. To improve the performance of polyoxometalate-based electrocatalyst in the hydrogen evolution reaction, one O^2- in polyoxometalate is replaced by S^2-. This weakens the binding of polyoxometalate to H*, facilitates its desorption, and improves the H₂ generation property. Vulcanized polyoxometalate only requires 55 mV to achieve 10 mA·cm^-2 current in the hydrogen evolution reaction. This electrocatalyst also exhibits promising performance in phenol degradation reaction, which is an ideal substitute for high-energy-consuming oxygen evolution reaction in H₂ production due to low voltage to drive. To acquire 100 and 200 mA·cm^-2 in the phenol degradation reaction, this vulcanized polyoxometalate only consumes 1.38 and 1.41 V. With this electrocatalyst working as a cathode and an anode simultaneously, an electrolyzer is constructed by employing phenol-containing KOH as an electrolyte. To obtain 100 and 200 mA·cm^-2 current, the electrolyzer only requires 1.54 and 1.57 V. Because energy-efficient phenol degradation reaction occurs, these values are obviously lower than the oxygen evolution reaction involved in the overall water-splitting H₂ production. This work provides a universal method to enhance the hydrogen evolution reaction (HER) activity of polyoxometalates. Furthermore, a new method is explored, which achieves energy conservation and phenol degradation simultaneously in H₂ production.

A combined experimental and theoretical approach revealing a direct mechanism for bifunctional water splitting on doped copper phosphide

A cost-effective electrocatalyst should have a high dispersion of active atoms and a controllable surface structure to optimize activity. Additionally, bifunctional characteristics give an added benefit for the overall water splitting. Herein, we report the synthesis and fabrication of Fe-doped Cu/Cu₃P supported on a flexible carbon cloth (CC) with a hydrophilic surface for efficient bifunctional water electrolysis under alkaline conditions. Surface doping of Fe in the hexagonal Cu₃P does not alter the lattice parameters, but it promotes the surface metallicity by stimulating Cu^δ+ and Cu⁰ sites in Cu₃P, resulting in an augmented electroactive surface area. Cu_2.75Fe_0.25P composition exhibits unprecedented OER activity with a low overpotential of 470 mV at 100 mA cm^-2. Under a two electrode electrolyzer system the oxygen and hydrogen gas was evolved with an unprecedented rate at their respective electrode made of same catalyst. Density functional theory further elucidates the role of the Fe center toward electronic state modulation, which eventually alters the entire adsorption behavior of the reaction intermediates and reduces the overpotential on Fe-doped system over pristine Cu₃P.