Electroreductive 5-Hydroxymethylfurfural Dimerization on Carbon Electrodes

An alternative to petrochemicals: biomass electrovalorization

Replacing petrochemicals with refined waste biomass as a sustainable chemical source has become an attractive option to lower global carbon emissions. Popular methods of refining lignocellulosic waste biomass use thermochemical processes, which have significant environmental downsides. Using electrochemistry instead would overcome many of these downsides, directly driving chemical reactions with renewable electricity and revolutionizing the way many chemicals are produced today. This review mainly focuses on two furanic platform chemicals that are produced from the dehydration of cellulose, 5-hydroxymethylfurfural and furfural, which can be electrochemically reduced or oxidized to replace fuels and monomers that today are obtained from petrochemicals. Critical parameters such as electrode materials and electrolyte pH are discussed in relation to their influence on conversion efficiency and product distribution.This article is part of the discussion meeting issue 'Green carbon for the chemical industry of the future'.

The Role of Alkali Cations on the Selectivity of 5-Hydroxymethylfurfural Electroreduction on Glassy Carbon

In the past decade, organic electrosynthesis has emerged as an atom- and energy-efficient strategy for harvesting renewable electricity that provides exceptional control over the reaction parameters. A profound and fundamental understanding of electrochemical interfaces becomes imperative to advance the knowledge-based development of electrochemical processes. The major strategy toward an efficient electrochemical system is based on the advancement in material science for electrocatalysis. Studies on the complex interplay among electrode surface, electrolyte, and transformation intermediates have only recently started to emerge. It involves acquiring atomic-scale insights into the electrochemical double layer, for which the identity and concentration of composing ions play a crucial role. In this study, we present how the identity and concentration of alkali cations impact the selectivity of aldehyde functionality electroreduction. As a case-study transformation, we set the electrochemical conversion of 5-hydroxymethylfurfural (HMF), a promising biomass-derived feedstock for the sustainable production of polymer or fuel precursors. Our findings reveal a consistent trend of the selectivity shift towards 2,5-bis(hydroxymethyl)furan (BHMF) as a function of cation size and concentration, rationalized by specific cation adsorption at the glassy carbon (GC), followed by the increase in the electrode surface charge density.

Rational Design of Transition-Metal-Based Catalysts for the Electrochemical 5-Hydroxymethylfurfural Reduction Reaction

The electrochemical reduction reaction (HMFRR) of 5-hydroxymethylfurfural (HMF) has emerged as a promising avenue for the utilization and refinement of the biomass-derived platform molecule HMF into high-value chemicals, addressing energy sustainability challenges. Transition metal electrocatalysts (TMCs) have recently garnered attention as promising candidates for catalyzing HMFRR, capitalizing on the presence of vacant d orbitals and unpaired d electrons. TMCs play a pivotal role in facilitating the generation of intermediates through interactions with HMF, thereby lowering the activation energy of intricate reactions and significantly augmenting the catalytic reaction rate. In the absence of comprehensive and guiding reviews in this domain, this paper aims to comprehensively summarize the key advancements in the design of transition metal catalysts for HMFRR. It elucidates the mechanisms and pH dependency of various products generated during the electrochemical reduction of HMF, with a specific emphasis on the bond-cleavage angle. Additionally, it offers a detailed introduction to typical in-situ characterization techniques. Finally, the review explores engineering strategies and principles to enhance HMFRR activity using TMCs, particularly focusing on multiphase interface control, crystal face control, and defect engineering control. This review introduces novel concepts to guide the design of HMFRR electrocatalysts, especially TMCs, thus promoting advancements in biomass conversion.

Reduction of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)Furan at High Current Density using a Ga-Doped AgCu:Cationomer Hybrid Electrocatalyst

Hydrogenation of biomass-derived chemicals is of interest for the production of biofuels and valorized chemicals. Thermochemical processes for biomass reduction typically employ hydrogen as the reductant at elevated temperatures and pressures. Here, the authors investigate the direct electrified reduction of 5-hydroxymethylfurfural (HMF) to a precursor to bio-polymers, 2,5-bis(hydroxymethyl)furan (BHMF). Noting a limited current density in prior reports of this transformation, a hybrid catalyst consisting of ternary metal nanodendrites mixed with a cationic ionomer, the latter purposed to increase local pH and facilitate surface proton diffusion, is investigated. This approach, when implemented using Ga-doped Ag-Cu electrocatalysts designed for p-d orbital hybridization, steered selectivity to BHMF, achieving a faradaic efficiency (FE) of 58% at 100 mA cm-2 and a production rate of 1 mmol cm-2 h-1, the latter a doubling in rate compared to the best prior reports.

Stability of Bimetallic PtxRuy - From Model Surfaces to Nanoparticulate Electrocatalysts

Fundamental research campaigns in electrocatalysis often involve the use of model systems, such as single crystals or magnetron-sputtered thin films (single metals or metal alloys). The downsides of these approaches are that oftentimes only a limited number of compositions are picked and tested (guided by chemical intuition) and that the validity of trends is not verified under operating conditions typically present in real devices. These together can lead to deficient conclusions, hampering the direct application of newly discovered systems in real devices. In this contribution, the stability of magnetron-sputtered bimetallic PtxRuy thin film electrocatalysts (0 at. % to 100 at. % Ru content) along with three commercially available carbon-supported counterparts (50-67 at. % Ru content) was mapped under electrocatalytic conditions in acidic electrolytes using online ICP-MS. We found several differences between the two systems in the amount of metals dissolved along with the development of the morphology and composition. While the Pt-rich PtxRuy compositions remained unchanged, 30-50 nm diameter surface pits were detected in the case of the Ru-rich sputtered thin films. Contrastingly, the surface of the carbon-supported NPs enriched in Pt accompanied by the leaching of a significant amount of Ru from the alloy structure was observed. Change in morphology was accompanied by a mass loss reaching around 1-2 wt % in the case of the sputtered samples and almost 10 wt % for the NPs. Since PtxRuy has prime importance in driving alcohol oxidation reactions, the stability of all investigated alloys was screened in the presence of isopropanol. While Pt dissolution was marginally affected by the presence of isopropanol, several times higher Ru dissolution was detected, especially in the case of the Ru-rich compositions. Our results underline that trends in terms of electrocatalytic activity and stability cannot always be transferred from model samples to systems that are closer to the ones applied in real devices.

Hydrogenation versus hydrogenolysis during alkaline electrochemical valorization of 5-hydroxymethylfurfural over oxide-derived Cu-bimetallics

The electrochemical conversion of 5-Hydroxymethylfurfural, especially its reduction, is an attractive green production pathway for carbonaceous e-chemicals. We demonstrate the reduction of 5-Hydroxymethylfurfural to 5-Methylfurfurylalcohol under strongly alkaline reaction environments over oxide-derived Cu bimetallic electrocatalysts. We investigate whether and how the surface catalysis of the MOx phases tune the catalytic selectivity of oxide-derived Cu with respect to the 2-electron hydrogenation to 2.5-Bishydroxymethylfuran and the (2 + 2)-electron hydrogenation/hydrogenolysis to 5-Methylfurfurylalcohol. We provide evidence for a kinetic competition between the evolution of H2 and the 2-electron hydrogenolysis of 2.5-Bishydroxymethylfuran to 5-Methylfurfurylalcohol and discuss its mechanistic implications. Finally, we demonstrate that the ability to conduct 5-Hydroxymethylfurfural reduction to 5-Methylfurfurylalcohol in alkaline conditions over oxide-derived Cu/MOx Cu foam electrodes enable an efficiently operating alkaline exchange membranes electrolyzer, in which the cathodic 5-Hydroxymethylfurfural valorization is coupled to either alkaline oxygen evolution anode or to oxidative 5-Hydroxymethylfurfural valorization.

Bipolar Verdazyl Radicals for Symmetrical Batteries: Properties and Stability in All States of Charge

Redox flow batteries based on organic electrolytes are promising energy storage devices, but stable long-term cycling is often difficult to achieve. Bipolar organic charge-storage materials allow the construction of symmetrical flow batteries (i. e., with identical electrolyte composition on both sides), which is a strategy to mitigate crossover-induced degradation. One such class of bipolar compounds are verdazyl radicals, but little is known on their stability/reactivity either as the neutral radical, or in the charged states. Here, we study the chemical properties of a Kuhn-type verdazyl radical (1) and the oxidized/reduced form (1^+/- ). Chemical synthesis of the three redox-states provides spectroscopic characterization data, which are used as reference for evaluating the composition of the electrolyte solutions of an H-cell battery during/after cycling. Our data suggest that, rather than the charged states, the decomposition of the parent verdazyl radical is responsible for capacity fade. Kinetic experiments and DFT calculations provide insight in the decomposition mechanism, which is shown to occur by bimolecular disproportionation to form two closed-shell products (leuco-verdazyl 1H and triazole derivative 2).

Recent Progress in Electrochemical Upgrading of Bio-Oil Model Compounds and Bio-Oils to Renewable Fuels and Platform Chemicals

Sustainable production of renewable carbon-based fuels and chemicals remains a necessary but immense challenge in the fight against climate change. Bio-oil derived from lignocellulosic biomass requires energy-intense upgrading to produce usable fuels or chemicals. Traditional upgrading methods such as hydrodeoxygenation (HDO) require high temperatures (200−400 °C) and 200 bar of external hydrogen. Electrochemical hydrogenation (ECH), on the other hand, operates at low temperatures (<80 °C), ambient pressure, and does not require an external hydrogen source. These environmental and economically favorable conditions make ECH a promising alternative to conventional thermochemical upgrading processes. ECH combines renewable electricity with biomass conversion and harnesses intermediately generated electricity to produce drop-in biofuels. This review aims to summarize recent studies on bio-oil upgrading using ECH focusing on the development of novel catalytic materials and factors impacting ECH efficiency and products. Here, electrode design, reaction temperature, applied overpotential, and electrolytes are analyzed for their impacts on overall ECH performance. We find that through careful reaction optimization and electrode design, ECH reactions can be tailored to be efficient and selective for the production of renewable fuels and chemicals. Preliminary economic and environmental assessments have shown that ECH can be viable alternative to convention upgrading technologies with the potential to reduce CO2 emissions by 3 times compared to thermochemical upgrading. While the field of electrochemical upgrading of bio-oil has additional challenges before commercialization, this review finds ECH a promising avenue to produce renewable carbon-based drop-in biofuels. Finally, based on the analyses presented in this review, directions for future research areas and optimization are suggested.

A Review on the Critical Role of H2 Donor in the Selective Hydrogenation of 5-Hydroxymethylfurfural

The selective hydrogenation of 5-hydroxymethylfurfural (HMF) has been of great interest to many scientists and researchers. However, conventional hydrogenation inevitably requires the use of gaseous hydrogen as a reducing agent, which is detrimental to its storage and transport. In this regard, other economical and environmentally friendly strategies, such as catalytic transfer hydrogenation/hydrogenolysis without external molecular H₂ , become more and more attractive. This Review provides the status and insight into the current research of hydrogenating HMF to high-value chemicals, using formic acid, alcohols, polymethylhydrosiloxane, water, and sodium borohydride as hydrogen donors and explains the hydrogenation mechanisms and the related hydrogenation characteristics of different hydrogen donors in the catalytic systems.

Insights into the Electrochemical Reduction of 5-Hydroxymethylfurfural at High Current Densities

The electrocatalytic reduction of 5-hydroxymethylfurfural (HMF) is highly selective to 2,5-bishydroxymethylfuran (BHMF) at pH=9.2, diluted HMF solutions, and low current densities. In this work, the electrochemical reduction of 0.05 m HMF solutions was investigated in the 5-50 mA cm^-2 current density range over an AgCu foam electrocatalyst. The selectivity towards the formation of BHMF or the dimerization depended on the current density, likely due to differences in the electrode potential, and on the reaction time. Operating at current densities of 40-50 mA cm^-2 allowed to find a trade-off between HMF and H₂ O activation, achieving 85 % BHMF selectivity and fostering the productivity (0.567 mmol cm^-2  h^-1 ), though co-producing H₂ . The electrochemical characterization by Tafel slopes and electrochemical impedance spectroscopy indicated that the HMF reduction was kinetically favored in comparison to the hydrogen evolution reaction and that the process was limited by charge transfer.