Magnetic particle characterization-magnetophoretic mobility and particle size

Measuring magnetic force field distributions in microfluidic devices: Experimental and numerical approaches

Precisely and accurately determining the magnetic force and its spatial distribution in microfluidic devices is challenging. Typically, magnetic microfluidic devices are designed in a way to both maximize the force within the separation region and to minimize the necessity for knowing such details-such as designing magnetic geometries that create regions of nearly constant magnetic force or that dictate the behavior of the magnetic force to be highly predictable in a specified region. In this work, we present a method to determine the spatial distribution of the magnetic force field in a magnetic microfluidic device by particle tracking magnetophoresis. Polystyrene microparticles were suspended in a paramagnetic fluid, gadolinium, and this suspension was exposed to various magnetic field geometries. Polystyrene particle motion was tracked using a microscope and images processed using Fiji (ImageJ). From a sample with a large spatial distribution of particle tracks, the magnetic force field distribution was calculated. The force field distribution was fitted to nonlinear spatial distribution models. These experimental models are compared to and supported by 3D simulations of the magnetic force field in COMSOL.

Continuous Flow Labeling and In-Line Magnetic Separation of Cells

There is an identified need for point-of-care diagnostic systems for detecting and counting specific rare types of circulating cells in blood. By adequately labeling such cells with immunomagnetic beads and quantum dots, they can be efficiently collected magnetically for quantification using fluorescence methods. Automation of this process requires adequate mixing of the labeling materials with blood samples. A static mixing device can be employed to improve cell labeling efficiency and eliminate error-prone laboratory operations. Computational fluid dynamics (CFD) were utilized to simulate the flow of a labeling-materials/blood mixture through a 20-stage in-line static mixer of the interfacial-surface-generator type. Optimal fluid mixing conditions were identified and tested in a magnetic bead/tumor cell model, and it was found that labeled cells could be produced at 1.0 mL/min flow rate and fed directly into an in-line magnetic trap. The trap design consists of a dual flow channel with three bends and a permanent magnet positioned at the outer curve of each bend. The capture of labeled cells in the device was simulated using CFD, finite-element analysis and magnetophoretic mobility distributions of labeled cells. Testing with cultured CRL14777 human melanoma cells labeled with anti-CD146 1.5 μm diameter beads indicated that 90 ± 10% are captured at the first stage, and these cells can be captured when present in whole blood. Both in-line devices were demonstrated to function separately and together as predicted.

Magnetic characterization of paramagnetic reagents by particle tracking velocimetry

Magnetic particle characterization determines the quality of magnetic particles and is of great importance in particle technology, drug delivery, cell separation, in vivo diagnostics, and other biomedical applications. The quality of the sample depends on the particle size, intrinsic magnetic properties of the particles, and the uniformity of these properties. A commercial particle tracking velocimeter was used to record and capture dark field images of particle trajectories in an applied isodynamic magnetic field. The calibrated particle size, magnetophoretic mobility, and additional image data were collected for each magnetic bead imaged. Using twenty-one different de-identified calibration beads and transmission electron microscopy to validate the vendor-reported particle size enabled the estimation of intrinsic magnetic properties, namely, apparent magnetic susceptibility and saturation magnetization, of individual paramagnetic particles. The distributions of volume magnetic susceptibility based on the magnetophoretic mobility and size of the particle for different magnetic beads were determined and displayed as two-parameter distributions. The measured apparent susceptibility and saturation magnetization were found to be directly proportional to the percentage of iron oxide in the reagent particles.

Multiplex Detection of Different Magnetic Beads Using Frequency Scanning in Magnetic Frequency Mixing Technique

In modern bioanalytical methods, it is often desired to detect several targets in one sample within one measurement. Immunological methods including those that use superparamagnetic beads are an important group of techniques for these applications. The goal of this work is to investigate the feasibility of simultaneously detecting different superparamagnetic beads acting as markers using the magnetic frequency mixing technique. The frequency of the magnetic excitation field is scanned while the lower driving frequency is kept constant. Due to the particles’ nonlinear magnetization, mixing frequencies are generated. To record their amplitude and phase information, a direct digitization of the pickup-coil’s signal with subsequent Fast Fourier Transformation is performed. By synchronizing both magnetic fields, a stable phase information is gained. In this research, it is shown that the amplitude of the dominant mixing component is proportional to the amount of superparamagnetic beads inside a sample. Additionally, it is shown that the phase does not show this behaviour. Excitation frequency scans of different bead types were performed, showing different phases, without correlation to their diverse amplitudes. Two commercially available beads were selected and a determination of their amount in a mixture is performed as a demonstration for multiplex measurements.

Shaping iron oxide nanocrystals for magnetic separation applications

Iron oxide nanostructures are attractive for a variety of bio-related applications given their wide range of magnetic properties. Here, we report on the study of the magnetophoretic mobility of octapod-shaped nanocrystals, which we relate to stoichiometry, quality and elongation in the 111 direction of these cubic structures. This special morphology combines magnetocrystalline anisotropies, increases shape anisotropy and hinders the formation of an epitaxial wüstite-magnetite interface. As a result, one obtains nanocrystals with large magnetic susceptibility and small coercivity, that is, with optimum characteristics for magnetic guidance, separation, and drug delivery, due to the increased magnetophoretic mobility displayed.