Interlaboratory comparison of the TransFix®/EDTA Vacuum Blood Collection tube with the 5 mL Cyto-Chex® BCT

Effects of blood sample storage time, temperature, anti-coagulants and blood stabiliser on lymphocyte phenotyping

Medical diagnostic laboratories have come under further scrutiny to ensure quality standards of their service and external quality assurance (EQA) programs involving multiple laboratories have been used to gauge this quality based on a consensus. However, because of the geographical distances within a country or internationally, cell surface marker expressions may change due to time delays and transport temperatures. Attention was given to this issue some decades ago and hence requires a re-evaluation in consideration of updated methods, reagents and instruments for flow cytometry and phenotyping. We have undertaken an extensive study to examine the effects of various conditions on blood storage akin to that experienced by patient samples as well as EQA programs, examining expression of lymphocyte surface markers, CD3, CD4, CD8, CD2, CD19, CD20, CD16/56 and HLA-DR. Assessment of lithium-heparin anticoagulated whole blood showed an increase in percentage of CD3+ and CD8+ T cells and a decrease in CD16/56+ NK cells after storage at room temperature (RT) for 24 and/or 48 h. In comparison, storage at 4°C led to a decrease in percentage of CD4+ and increase in percentage of CD8+ cells. The low temperature also caused an increase in percentage of B cells (CD19+, CD20+). While storage at RT did not alter levels of HLA-DR+ CD3+ T cells, there was a significant increase in percentage of these cells after 48 h. Changes were also seen at both temperatures when EDTA was used as an anti-coagulant. Assessment of blood treated with a stabiliser, normally used in the EQA samples (Streck Cell Preservative), reduced the range of lymphocyte subsets affected, with only CD2+ and CD20+ cells being significantly different at both temperatures, We conclude that 24-48 h storage/transport can affect the percentage of CD3+, CD4+ T cells, CD8+ T cells, B cells, NK cells and HLADR+ T cells which can be minimised by using the blood stabiliser as per EQA programs and we emphasise the need to adopt this in the processing of patients' blood samples.

Measuring antigen expression of cancer cell lines and circulating tumour cells

When evaluating EpCAM-based enrichment technologies for circulating tumour cells (CTCs), the cell lines used should closely resemble real CTCs, meaning the EpCAM expression of CTCs needs to be known, but also the EpCAM expression of cell lines at different institutions and times is important. As the number of CTCs in the blood is low, we enriched CTCs through the depletion of leukocytes from diagnostic leukapheresis products of 13 prostate cancer patients and measured EpCAM expression using quantitative flow cytometry. Antigen expression was compared between multiple institutions by measuring cultures from each institution. Capture efficiency was also measured for one of the used cell lines. Results show CTCs derived from castration-sensitive prostate cancer patients have varying but relatively low EpCAM expression, with median expression per patient ranging from 35 to 89,534 (mean 24,993) molecules per cell. A large variation in the antigen expression of identical cell lines cultured at different institutions was found, resulting in recoveries when using the CellSearch system ranging from 12 up to 83% for the same cell line. We conclude that large differences in capture efficiency can occur while using the same cell line. To closely resemble real CTCs from castration-sensitive prostate cancer patients, a cell line with a relatively low EpCAM expression should be used, and its expression should be monitored frequently.

Implementing microwell slides for detection and isolation of single circulating tumor cells from complex cell suspensions

Cell loss during detection and isolation of circulating tumor cells (CTCs) is a challenge especially when label-free pre-enrichment technologies are used without the aid of magnetic particles. Although microfluidic systems can remove the majority of "contaminating" white blood cells (WBCs), their remaining numbers are still impeding single CTC isolation, thus making additional separation steps needed. This study aimed to develop a workflow from blood-to-single CTC for complex cell suspensions by testing two microwell formats. In the first step, different cell lines were used to compare the performances of Sievewell™ 370 K (TOK, Japan) and CellCelector™ Nanowell U25 (ALS Automated Lab Solutions, Germany) slides for cell labelling and single-cell micromanipulation. Confounding levels of auto-fluorescence inherent to different plastic materials used to cast the microwells, staining recovery rates, and cell isolation rates were determined. In the second step, three different blood preservation tubes were tested for RNA analysis. Lastly, the established workflow was applied to isolate CTCs from peripheral blood samples obtained from metastasized breast cancer (mBC) patients for single-cell DNA and RNA analysis. The detection of CTCs in Sievewell slides profit from better signal-to-noise ratios in the fluorescence channels mainly used for CTC detection. In addition, due to its design, Sievewell supports direct in situ CTC labelling, which minimizes cell loss and leads to single-cell recovery rates after staining of approx. 94%. Detection of PIK3CA mutations in single CTCs verified the applicability of the workflow for the analysis of genomic DNA of CTCs. Furthermore, combined with blood preservation up to 48 h at room temperature in LBguard tubes, panel RT-PCR transcript analysis was successful for single cell line cells and CTCs, respectively. The combined use of Sievewell microwell slides and CellCelector™ automated micromanipulation system improves single CTC detection, labelling and isolation from complex cell suspensions. This approach is especially valuable when samples of high cellular content are processed.

The influence of fixation of biological samples on cell count and marker expression stability in flow cytometric analyses

The most common applications of flow cytometry (FC) include diagnostics of haemato-oncological disorders, based on analysis of bone marrow, peripheral blood (PB), or cerebrospinal fluid (CSF) samples. A proper diagnostic process requires standardisation in setting the optimal time frame between material collection and the assay. Unfortunately, this might be difficult to achieve in daily practice due to unintended shipment delays, which might compromise large-scale multicentre studies. Thus, material fixation should be considered as a solution. The most widely used fixative agents are: paraformaldehyde, TransFix^®, Cyto-Chex^®, and serum-containing media. In this review, we attempted to summarise the literature data on the influence of sample storage under different temperatures and times combined with different fixation conditions on the cell count and marker expression levels. Based on the findings of several extensive studies employing fixed PB samples, it can be concluded that the performance of particular fixative greatly depends on the analysed marker and specific PB cell population expressing a given antigen. Preservation of absolute cell count was usually better in Cyto-Chex^®-fixed PB samples, whereas TransFix^® tended to better stabilise marker expression levels. CSF-based studies reveal that both serum-containing media and TransFix^® can prevent cellular loss and enhance FC-based detection of leptomeningeal localisations of haematological malignancies, the latter being more available and having longer shelf-life. As both cell count and marker expression level are the main determinants of quality of biological samples dedicated to FC analyses, it remains to be addressed by the investigators which is the fixative of choice for their specific research aims.

Circulating stem cells and cardiovascular outcomes: from basic science to the clinic

The cardiovascular and haematopoietic systems have fundamental inter-relationships during development, as well as in health and disease of the adult organism. Although haematopoietic stem cells (HSCs) emerge from a specialized haemogenic endothelium in the embryo, persistence of haemangioblasts in adulthood is debated. Rather, the vast majority of circulating stem cells (CSCs) is composed of bone marrow-derived HSCs and the downstream haematopoietic stem/progenitors (HSPCs). A fraction of these cells, known as endothelial progenitor cells (EPCs), has endothelial specification and vascular tropism. In general, the levels of HSCs, HSPCs, and EPCs are considered indicative of the endogenous regenerative capacity of the organism as a whole and, particularly, of the cardiovascular system. In the last two decades, the research on CSCs has focused on their physiologic role in tissue/organ homoeostasis, their potential application in cell therapies, and their use as clinical biomarkers. In this review, we provide background information on the biology of CSCs and discuss in detail the clinical implications of changing CSC levels in patients with cardiovascular risk factors or established cardiovascular disease. Of particular interest is the mounting evidence available in the literature on the close relationships between reduced levels of CSCs and adverse cardiovascular outcomes in different cohorts of patients. We also discuss potential mechanisms that explain this association. Beyond CSCs' ability to participate in cardiovascular repair, levels of CSCs need to be interpreted in the context of the broader connections between haematopoiesis and cardiovascular function, including the role of clonal haematopoiesis and inflammatory myelopoiesis.

Multicentre Harmonisation of a Six-Colour Flow Cytometry Panel for Naïve/Memory T Cell Immunomonitoring

Background

Personalised medicine in oncology needs standardised immunological assays. Flow cytometry (FCM) methods represent an essential tool for immunomonitoring, and their harmonisation is crucial to obtain comparable data in multicentre clinical trials. The objective of this study was to design a harmonisation workflow able to address the most effective issues contributing to intra- and interoperator variabilities in a multicentre project.

Methods

The Italian National Institute of Health (Istituto Superiore di Sanità, ISS) managed a multiparametric flow cytometric panel harmonisation among thirteen operators belonging to five clinical and research centres of Lazio region (Italy). The panel was based on a backbone mixture of dried antibodies (anti-CD3, anti-CD4, anti-CD8, anti-CD45RA, and anti-CCR7) to detect naïve/memory T cells, recognised as potential prognostic/predictive immunological biomarkers in cancer immunotherapies. The coordinating centre distributed frozen peripheral blood mononuclear cells (PBMCs) and fresh whole blood (WB) samples from healthy donors, reagents, and Standard Operating Procedures (SOPs) to participants who performed experiments by their own equipment, in order to mimic a real-life scenario. Operators returned raw and locally analysed data to ISS for central analysis and statistical elaboration.

Results

Harmonised and reproducible results were obtained by sharing experimental set-up and procedures along with centralising data analysis, leading to a reduction of cross-centre variability for naïve/memory subset frequencies particularly in the whole blood setting.

Conclusion

Our experimental and analytical working process proved to be suitable for the harmonisation of FCM assays in a multicentre setting, where high-quality data are required to evaluate potential immunological markers, which may contribute to select better therapeutic options.