A Ruthenium(II)-Complexed Rotaxane Whose Ring Incorporates a 6,6′-Diphenyl-2,2′-bipyridine: Synthesis and Light-Driven Motions

Enhanced Light-Harvesting Efficiency and Adaptation: A Review on Visible-Light-Driven Micro/Nanomotors

As visible light accounts for a larger proportion of solar energy and is harmless to living organisms, it has the potential to be the energy source of micro/nanomotors, which transform visible-light energy into mechanical motion, for different applications, especially in environmental remediation. However, how to precisely control the motion of visible-light-driven micro/nanomotors (VLD-MNMs) and efficiently utilize the weak visible-light photon energy to acquire rapid motion are significant challenges. This review summarizes the most critical aspects, involving photoactive materials, propulsion mechanisms, control methods, and applications of VLD-MNMs, and discusses strategies to systematically enhance the energy-harvesting efficiency and adaptation. At first, the photoactive materials have been divided into inorganic and organic photoactive materials and comprehensively discussed. Then, different propulsion mechanisms of the current VLD-MNMs are presented to explain the improvement in the actuation force, speed, and environmental adaptability. In addition, considering the characteristics of easy control of VLD-MNMs, we summarized the direction, speed, and cluster control methods of VLD-MNMs for different application requirements. Subsequently, the potential applications of VLD-MNMs, e.g., in environmental remediation, micropumps, cargo delivery, and sensing in microscale, are presented. Finally, discussions and suggestions for future directions to enhance the energy-harvesting efficiency and adaptation of VLD-MNMs are provided.

Synthesis and Light-Induced Actuation of Photo-Labile 2-Pyridyl-1,2,3-Triazole Ru(bis-bipyridyl) Appended Ferrocene Rotors

To realise useful control over molecular motion in the future an extensive toolbox of both actionable molecules and stimuli-responsive units must be developed. Previously, our laboratory has reported 1,1'-disubstituted ferrocene (Fc) rotor units which assume a contracted/π-stacked conformation until complexation of cationic metal ions causes rotation about the Ferrocene (Fc) molecular 'ball-bearing'. Herein, we explore the potential of using the photochemical ejection of [Ru(2,2'-bipyridyl)₂]2+ units as a stimulus for the rotational contraction of new ferrocene rotor units. Fc rotors with both 'regular' and 'inverse' 2-pyridyl-1,2,3-triazole binding pockets and their corresponding [Ru(2,2'-bipyridyl)₂]2+ complexes were synthesised. The rotors and complexes were characterised using nuclear magnetic resonance (NMR) and ultraviolet (UV)-visible spectroscopies, Electro-Spray Ionisation Mass Spectrometry (ESI⁻MS), and electrochemistry. The 1,1'-disubstituted Fc ligands were shown to π-stack both in solution and solid state. Density Functional Theory (DFT) calculations (CAM-B3LYP/6-31G(d)) support the notion that complexation to [Ru(2,2'-bipyridyl)₂]2+ caused a rotation from the syn- to the anti-conformation. Upon photo-irradiation with UV light (254 nm), photo-ejection of the [Ru(2,2'-bipyridyl)₂(CH₃CN)₂]2+ units in acetonitrile was observed. The re-complexation of the [Ru(2,2'-bipyridyl)₂]2+ units could be achieved using acetone as the reaction solvent. However, the process was exceedingly slowly. Additionally, the Fc ligands slowly decomposed when exposed to UV irradiation meaning that only one extension and contraction cycle could be completed.

Photo-Induced Assembly of a Luminescent Tetraruthenium Square

Self-assembly is a powerful synthetic tool that has led to the development of one-, two- and three-dimensional architectures. From MOFs to molecular flasks, self-assembled materials have proven to be of great interest to the scientific community. Here we describe a strategy for the construction and de-construction of a supramolecular structure through unprecedented photo-induced assembly and dis-assembly. The combination of two approaches, a [n×1]-directional bonding strategy and a ligand photo-dissociation strategy, allows the photo-induced assembly of a polypyridyl Ru^II precursor into a discrete molecular square. Diffusion-ordered NMR spectroscopy confirmed the synthesis of a higher volume species, while the identity of the species was established by high-resolution mass spectrometry and single-crystal X-ray diffraction studies. The self-assembled square is not obtained by classical thermal techniques in similar conditions, but is obtained only by light-irradiation. The tetraruthenium square has an excited-state lifetime (135 ns), 40 times that of its mononuclear precursor and its luminescence quantum yield (1.0 %) is three orders of magnitude higher. These remarkable luminescence properties are closely related to the relatively rigid square structure of the tetraruthenium assembly, as suggested by slow radiationless decay and transient absorption spectroscopy. The results described herein are a rare example of photo-induced assembly and dis-assembly processes, and can open the way to a new avenue in supramolecular chemistry, leading to the preparation of structurally organized supermolecules by photochemical techniques.

Ruthenium polypyridyl complexes hopping at anionic lipid bilayers through a supramolecular bond sensitive to visible light

The new ruthenium complex [Ru(terpy)(dcbpy)(Hmte)](PF(6))(2) ([2](PF(6))(2); dcbpy=6,6'-dichloro-2,2'-bipyridine, terpy=2,2';6',2"-terpyridine, Hmte=2-(methylthio)ethanol) was synthesized. In the crystal structure, this complex is highly distorted, revealing steric congestion between dcbpy and Hmte. In water, [2](2+) forms spontaneously by reacting Hmte and the aqua complex [Ru(terpy)(dcbpy)(OH(2))](2+) ([1](2+)), with a second-order rate constant of 0.025 s(-1) M(-1) at 25 °C. In the dark, the Ru-S bond of [2](2+) is thermally unstable and partially hydrolyzes; in fact, [1](2+) and [2](2+) are in an equilibrium characterized by an equilibrium constant K of 151 M(-1). When exposed to visible light, the Ru-S bond is selectively broken to release [1](2+), that is, the equilibrium is shifted by visible-light irradiation. The light-induced equilibrium shifts were repeated four times without major signs of degradation; the Ru-S coordination bond in [2](2+) can be described as a robust, light-sensitive, supramolecular bond in water. To demonstrate the potential of this system in supramolecular chemistry, a new thioether-cholesterol conjugate (4), which inserts into lipid bilayers through its cholesterol moiety and coordinates to ruthenium through its sulfur atom, was synthesized. Thioether-functionalized, anionic, dimyristoylphosphatidylglycerol (DMPG), lipid vesicles, to which aqua complex [1](2+) efficiently coordinates, were prepared. Upon exposure of the Ru-decorated vesicles to visible light, the Ru-S bond is selectively broken, thus releasing [1](2+) that stays at the water-bilayer interface. When the light is switched off, the metal complex spontaneously coordinates back to the membrane-embedded thioether ligands without a need to heat the system. This process was repeated four times at 35 °C, thus achieving light-triggered hopping of the metal complex at the water-bilayer interface.

[2]Catenanes built around octahedral transition-metal complexes that contain two intertwined endocyclic but non-sterically hindering tridentate ligands

Sterically hindering bidentate chelates, such as 2,9-diphenyl-1,10-phenanthroline, form entwined complexes with copper(I) and other tetrahedrally coordinated transition-metal centres. To prepare octahedral complexes containing two entwined tridentate ligands and thus apply a strategy similar to that used for making catenanes with tetrahedral metal centres, the use of the classical terpy ligand (terpy=2,2':6',2''-terpyridine) appears to be attractive. In fact, 6,6''-diphenyl-2,2':6',2''-terpyridine (dp-terpy) is not appropriate due to strong "pinching" of the organic backbone by coordination to the metal and thus stable entwined complexes with this ligand cannot be obtained. Herein, we report the synthesis and coordination properties of a new family of tridentate ligands, the main features of which are their endocyclic nature and non-sterically hindering character. The coordinating fragment consists of two 8'-phenylisoquinolin-3'-yl groups attached at the 2 and 6 positions of a pyridine nucleus. Octahedral complexes containing two such entangled ligands around an octahedral metal centre, such as Fe(II) , Ru(II) or Co(III) , are highly stable, with no steric congestion around the metal. By using functionalised ligands bearing terminal olefins, double ring-closing metathesis leads to [2]catenanes in good yield with Fe(II) or Co(III) as the templating metal centre. The X-ray crystallography structures of the Fe(II) precursor and the Fe(II) catenane are also reported. These show that although significant pinching of the ligand is observed in both Fe(II) complexes, the system is very open and no steric constraints can be detected.

Strategies and tactics for the metal-directed synthesis of rotaxanes, knots, catenanes, and higher order links

More than a quarter of a century after the first metal template synthesis of a [2]catenane in Strasbourg, there now exists a plethora of strategies available for the construction of mechanically bonded and entwined molecular level structures. Catenanes, rotaxanes, knots and Borromean rings have all been successfully accessed by methods in which metal ions play a pivotal role. Originally metal ions were used solely for their coordination chemistry; acting either to gather and position the building blocks such that subsequent reactions generated the interlocked products or by being an integral part of the rings or "stoppers" of the interlocked assembly. Recently the role of the metal has evolved to encompass catalysis: the metal ions not only organize the building blocks in an entwined or threaded arrangement but also actively promote the reaction that covalently captures the interlocked structure. This Review outlines the diverse strategies that currently exist for forming mechanically bonded molecular structures with metal ions and details the tactics that the chemist can utilize for creating cross-over points, maximizing the yield of interlocked over non-interlocked products, and the reactions-of-choice for the covalent capture of threaded and entwined intermediates.

Redox control of molecular motion in switchable artificial nanoscale devices

The design, synthesis, and operation of molecular-scale systems that exhibit controllable motions of their component parts is a topic of great interest in nanoscience and a fascinating challenge of nanotechnology. The development of this kind of species constitutes the premise to the construction of molecular machines and motors, which in a not-too-distant future could find applications in fields such as materials science, information technology, energy conversion, diagnostics, and medicine. In the past 25 years the development of supramolecular chemistry has enabled the construction of an interesting variety of artificial molecular machines. These devices operate via electronic and molecular rearrangements and, like the macroscopic counterparts, they need energy to work as well as signals to communicate with the operator. Here we outline the design principles at the basis of redox switching of molecular motion in artificial nanodevices. Redox processes, chemically, electrically, or photochemically induced, can indeed supply the energy to bring about molecular motions. Moreover, in the case of electrically and photochemically induced processes, electrochemical and photochemical techniques can be used to read the state of the system, and thus to control and monitor the operation of the device. Some selected examples are also reported to describe the most representative achievements in this research area.

Getting harder: cobalt(III)-template synthesis of catenanes and rotaxanes

The synthesis of catenanes and rotaxanes using the hard trivalent transition metal ion cobalt(III) as a template is reported. Tridentate dianionic pyridine-2,6-dicarboxamido ligands, each with two terminal alkene groups, coordinate Co(III) in a mutually orthogonal arrangement such that entwined or interlocked molecular architectures are produced by ring-closing olefin metathesis. Double macrocyclization of two such ligands bound to Co(III) afford a non-interlocked "figure-of-eight" complex in 42% yield, the structure determined by X-ray crystallography. Preforming one macrocycle and carrying out a single macrocyclization of the second bis-olefin with both ligands attached to the Co(III) template led to the isomeric [2]catenate in 69% yield. The mechanically interlocked structure was confirmed by X-ray crystallography of both the Co(III) catenate and the metal-free catenand. A Co(III)-template [2]rotaxane was assembled in 61% yield by macrocyclization of the bis-olefin ligand about an appropriate dianionic thread. For both catenanes and rotaxanes, removal of the metal ion via reduction under acidic conditions to the more labile Co(II) gave neutral interlocked molecules with well-defined co-conformations stabilized by intercomponent hydrogen bonding.

Synthesis and Photochemistry of a Two-Position Ru(terpy)(phen)(L)2+ Scorpionate Complex

A dissymmetric 1,10-phenanthroline chelate (N-phen-S) bearing two polyether chains terminated by two monodentate ligands of the benzonitrile (N) and dialkylesulfoxide (S) types was synthesized, characterized, and coordinated to ruthenium. The corresponding Ru(terpy)(N-phen-S)2+ complexes (terpy = 4'-(3,5-ditertiobutylphenyl)-2,2';6',2' '-terpyridine) were fully characterized as being two coordination isomers of the scorpionate type with one of the two tails occupying the sixth position on the coordination sphere. Photoexpulsion of the coordinated tail led to opening of the ruthena-macrocycle and subsequent rearrangement of the bidentate chelate. This rearrangement consisted of a 90 degrees rotation of the phenanthroline around the ruthenium atom. Selective irradiation of one isomer in a mixture of the two was undertaken using band-pass filters; this resulted in an enrichment of the nonirradiated isomer in the mixture. Thermal back-coordination of the tail was investigated in the dark. It took place quantitatively from the corresponding ruthenium chloride complex by trapping of the anion with silver salts.

Artificial nanomachines based on interlocked molecular species: recent advances

The bottom-up construction and operation of nanoscale machines and motors, that is, supramolecular systems wherein the molecular components can be set in motion in a controlled manner for ultimately accomplishing a function, is a topic of great interest in nanoscience and a fascinating challenge of nanotechnology. The field of artificial molecular machines and motors is growing at an astonishing rate and is attracting a great deal of interest. Research in the last decade has shown that species made of interlocked molecular components like rotaxanes, catenanes and related systems are most attractive candidates. In recent times, the evolution of the structural and functional design of such systems has led to the construction and operation of complex molecular machines that, in some cases, are able to do specific tasks. This tutorial review is intended to discuss the design principles for nanomachines based on interlocked molecules, and to provide a timely overview on representative prototype systems.

Artificial Molecular Motors Powered by Light

The bottom-up construction and operation of machines and motors of molecular size is a topic of great interest in nanoscience, and a fascinating challenge of nanotechnology. The problem of the energy supply to make molecular motors work is of the greatest importance. Research in the last ten years has demonstrated that light energy can indeed be used to power artificial nanomotors by exploiting photochemical processes in appropriately designed systems. More recently, it has become clear that under many aspects light is the best choice to power molecular motors; for example, systems that show autonomous operation and do not generate waste products can be obtained. This review is intended to discuss the design principles at the basis of light-driven artificial nanomotors, and provide an up-to-date overview on the prototype systems that have been developed.

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.