Synthesis of Monodisperse CdS Nanospheres in an Inverse Microemulsion System Formed with a Dendritic Polyether Copolymer

Aggregation behaviors of PEO-PPO-ph-PPO-PEO and PPO-PEO-ph-PEO-PPO at an air/water interface: experimental study and molecular dynamics simulation

The block polyethers PEO-PPO-ph-PPO-PEO (BPE) and PPO-PEO-ph-PEO-PPO (BEP) are synthesized by anionic polymerization using bisphenol A as initiator. Compared with Pluronic P123, the aggregation behaviors of BPE and BEP at an air/water interface are investigated by the surface tension and dilational viscoelasticity. The molecular construction can influence the efficiency and effectiveness of block polyethers in decreasing surface tension. BPE has the most efficient ability to decrease surface tension of water among the three block polyethers. The maximum surface excess concentration (Γ(max)) of BPE is larger than that of BEP or P123. Moreover, the dilational modulus of BPE is almost the same as that of P123, but much larger than that of BEP. The molecular dynamics simulation provides the conformational variations of block polyethers at the air/water interface.

Enhancing charge-storage capacity of non-volatile memory devices using template-directed assembly of gold nanoparticles

We demonstrate the controlled fabrication of aggregates of gold nanoparticles as a means of enhancing the charge-storage capacity of metal-insulator-semiconductor (MIS) devices by up to 300% at a low biasing voltage of ±4 V. Aggregates of citrate stabilized gold nanoparticles were obtained by directed electrostatic self-assembly onto an underlying nanopattern of positively charged centers. The underlying nanopatterns consist of amine functionalized gold nanoparticle arrays formed using amphiphilic diblock copolymer reverse micelles as templates. The hierarchical self-organization leads to a twelve-fold increase in the number density of the gold nanoparticles and therefore significantly increases the charge storage centers for the MIS device. The MIS structure showed counterclockwise C-V hysteresis curves indicating a good memory effect. A memory window of 1 V was obtained at a low biasing voltage of ±4 V. Furthermore, C-t measurements conducted after applying a charging bias of 4 V showed that the charge was retained beyond 20,000 s. The proposed strategy can be readily adapted for fabricating next generation solution processible non-volatile memory devices.

Effect of alcohols on aggregation behaviors of branched block polyether Tetronic 1107 at an air/liquid surface

The aggregation behaviors of branched block polyether Tetronic 1107 (T1107) at an air/liquid surface was investigated in mixed solvents consisting of water and one of the following polar cosolvents: ethanol, n-propanol, ethylene glycol (EG), or glycerol (GLY). Surface tension measurements provide information about the effects of cosolvents on the critical micellization concentration (cmc), the standard Gibbs energy (ΔG°(mic)), the maximum surface excess concentration (Γ(max)), the minimum area per polyether molecule at the air/liquid surface (A(min)), and the standard free energy of adsorption (ΔG°(ads)). The addition of ethanol and n-propanol to water disfavors the micellization and progressively increases the cmc of T1107, whereas the cmc decreases with the addition of EG and GLY. The values of ΔG°(mic) of T1107 are all negative in mixed solvents, and their absolute values become smaller as the ethanol or n-propanol content increases but become larger as the EG or GLY content increases. The cosolvents have a significant effect on the surface adsorption and cmc, and the order is as follows: n-propanol-water > ethanol-water > water > EG-water > GLY-water. The octanol/water partition coefficient (log P) of the cosolvent is used to correlate the effects, and it could capture the effect of cosolvents on the cmc qualitatively. The surface dilational rheological properties of T1107 in water and water-alcohol mixtures were also studied by surface dilational viscoelasticity and surface tension relaxation measurements. The dilational elasticity decreases monotonously in the presence of ethanol or n-propanol. With the increasing concentration of EG and GLY, the dilational elasticity of T1107 passes through a maximum that coincides with the change in Γ(max).

Facile covalent immobilization of cadmium sulfide quantum dots on graphene oxide nanosheets: preparation, characterization, and optical properties

A facile approach for the preparation of a novel hybrid material containing graphene and an inorganic semiconducting material, cadmium sulfide quantum dots (CdS QDs), is demonstrated for the first time. First, amino-functionalized CdS QDs were prepared by modifications of the kinetic trapping method. Then, pristine graphite was oxidized and exfoliated to obtain graphene oxide nanosheets (GONS), which were then acylated with thionyl chloride to introduce acyl chloride groups on their surface. Subsequently, immobilization of the CdS QDs on the GONS surface was achieved through an amidation reaction between the amino groups located on the CdS QDs surface and the acyl chloride groups bound to the GONS surface. Fourier transform infrared spectroscopy (FT-IR), (1)H nuclear magnetic resonance ((1)H-NMR), x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and energy dispersive x-ray (EDX) spectroscopy were employed to investigate the changes in the surface functionalities, while high resolution transmission electron microscopy (HR-TEM) and field emission scanning electronic microscopy (FE-SEM) were used to study the morphologies and distribution of the CdS QDs on the GONS surface. Thermogravimetric analysis (TGA) was employed to characterize the weight loss of the samples on heating. Photoluminescence (PL) measurements were used to study the optical properties of the prepared CdS QDs and the CdS-graphene hybrid material.

Single Crystalline Cadmium Sulfide Nanowires with Branched Structure

In this article, we report the synthesis of branched single crystal CdS nanowires. This branched CdS nanostructure is prepared by a simple surfactant-directing method, which is of particular interest as it uses readily available reagents and provides a convenient route to high-yield single crystal nanowires but with branched shape. These branched nanowires have an average diameter of about 40 nm and length up to several micrometers. A possible mechanism has been proposed and the addition of surfactant dodecylthiol into the two mixed-solvents would play an importance effect on the structure of the product. Based on the mechanism, by controlling the synthesis conditions, such as the ratios between the surfactant, inorganic solvent, and organic solvent, other kinds of nanostructures based on CdS nanowires were also prepared. Photoluminescence (PL) measurement reveals that the branched CdS nanowires have a strong emission at about 700 nm which might be due to its special structure.

Surface modification of CdS quantum dots using thiols-structural and photophysical studies

This study is aimed at identifying a suitable organic thiol for CdS by studying its structural, thermal and photophysical characteristics. Quantum dots of the II-VI semiconductor CdS, in the size regime of 2.0-3.3 nm, were prepared in the cubic phase by a wet chemical method. Five organic thiols were used for capping: (i) 1,4-dithiothreitol (DTT), (ii) 2-mercaptoethanol (ME), (iii) cysteine (Cys), (iv) methionine (Meth), and (v) glutathione (GSH). Structural studies were carried out by x-ray diffraction (XRD) and transmission electron microscopy (TEM), which revealed the cubic phase of CdS. Optical properties were studied by FT-IR, UV-visible and fluorescence spectroscopic techniques, and a comparison was made between uncapped and capped CdS. FT-IR studies suggested two different bonding mechanisms of the capping agents with the CdS. GSH and DTT capped CdS showed significant decrease in absorption wavelengths. An increase in band gap was observed in two cases: when (i) capped and (ii) decreased in size. The band gap was increased from 2.50 eV for the uncapped to 2.77 eV for the DTT capped CdS. DTT was found to be the best capping agent for CdS among these five organic thiols in two aspects: (i) yielding lower grain size in cubic phase, and (ii) good fluorescence properties with efficient quenching of the surface traps.