Polyoxometalate Multi-Electron-Transfer Catalytic Systems for Water Splitting

Designing a hybrid nanomaterial based on Cr-containing polyoxometalate and graphene oxide as an electrocatalyst for the hydrogen evolution reaction

A new polyoxometalate (POM)-based hybrid nanomaterial (denoted as PMo11-Cr-mGO) was designed via covalent interaction between the Cr(acac)3 complex and [PMo11O39]7- followed by immobilization on the surface of modified graphene oxide (mGO). The prepared nanomaterial was characterized using a series of physicochemical techniques. X-ray diffraction (XRD), Raman analysis, transmission electron microscopy (TEM), and FE-SEM-EDS revealed the preservation of layered GO during the formation of the desired hybrid nanomaterial. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and elemental analysis confirmed the immobilization of POM (PMo11-Cr) on the surface of mGO and the formation of PMo11-Cr-mGO. In order to evaluate the performance of PMo11-Cr-mGO in the hydrogen evolution reaction (HER), electrochemical measurements were also performed. The resulting PMo11-Cr-mGO exhibited excellent HER activities with a low overpotential of 153 mV at 10 mA cm-2 and good durability in acidic media, thus emerging as one of the most efficient POM-based electrocatalysts.

Hydroxylated Polyoxometalate with Cu(II)- and Cu(I)-Aqua Complexes: A Bifunctional Catalyst for Electrocatalytic Water Splitting at Neutral pH

A sole inorganic framework material [Li(H2O)4][{CuI(H2O)1.5} {CuII(H2O)3}2{WVI12O36(OH)6}]·N2·H2S·3H2O (1) consisting of a hydroxylated polyoxometalate (POM) anion, {WVI12O36(OH)6}6-, a mixed-valent Cu(II)- and Cu(I)-aqua cationic complex species, [{CuI(H2O)1.5}{CuII(H2O)3}2]5+, a Li(I)-aqua complex cation, and three solvent molecules, has been synthesized and structurally characterized. During its synthesis, the POM cluster anion gets functionalized with six hydroxyl groups, i.e., six WVI-OH groups per cluster unit. Moreover, structural and spectral analyses have shown the presence of H2S and N2 molecules in the concerned crystal lattice, formed from "sulfate-reducing ammonium oxidation (SRAO)". Compound 1 functions as a bifunctional electrocatalyst exhibiting oxygen evolution reaction (OER) by water oxidation and hydrogen evolution reaction (HER) by water reduction at the neutral pH. We could identify that the hydroxylated POM anion and copper-aqua complex cations are the functional sites for HER and OER, respectively. The overpotential, required to achieve a current density of 1 mA/cm2 in the case of HER (water reduction), is found to be 443 mV with a Faradaic efficiency of 84% and a turnover frequency of 4.66 s-1. In the case of OER (water oxidation), the overpotential needed to achieve a current density of 1 mA/cm2 is obtained to be 418 mV with a Faradaic efficiency of 80% and turnover frequency of 2.81 s-1. Diverse electrochemical controlled experiments have been performed to conclude that the title POM-based material functions as a true bifunctional catalyst for electrocatalytic HER as well as OER at the neutral pH without catalyst reconstruction.

{Cu8} Cluster-Sandwiched Polyoxotungstates and Their Polymers: Syntheses, Structures, and Properties

Four inorganic-organic hybrid octa-Cu cluster sandwiched polyoxotungstates (POTs), [Cu₈(H₂O)₂(en)₄(B-α-H₂SiW₉O₃₄)₂] (1), [Cu₈(H₂O)₂(en)₄(B-α-H₂GeW₉O₃₄)₂] (2), K₂[Cu₈(en)₄(B-α-HSiW₉O₃₄)₂]·6H₂O (3), and K₂[Cu₈(en)₄(B-α-HGeW₉O₃₄)₂]·2H₂O (4) (en = ethylenediamine), were hydrothermally made and characterized by single-crystal X-ray diffraction, infrared spectra, powder X-ray diffraction, and thermogravimetric analysis, respectively. Structure analysis reveals that the polyoxoanion of 1/2 is a discrete dimer built by two trivalent Keggin [B-α-XW₉O₃₄]^10- (X = Si/Ge) fragments and one octa-Cu cluster, whereas 3 and 4 display a two-dimensional network built by octa-Cu-sandwiched POT units via substitution of coordinated water on polyanions of 1 and 2 and further expand into a three-dimensional framework via K cation bridges. Ultraviolet-visible diffuse reflectance spectra reveal that 1-4 are potential semiconductor materials. Moreover, its visible light-driven catalytic H₂ evolution activity, electrochemical properties, catalysis for oxygenation reactions of thioethers, and magnetic behaviors have been investigated in detail.

Design of molecular water oxidation catalysts with earth-abundant metal ions

The four-electron oxidation of water (2H2O → O2 + 4H+ + 4e-) is considered the main bottleneck in artificial photosynthesis. In nature, this reaction is catalysed by a Mn4CaO5 cluster embedded in the oxygen-evolving complex of photosystem II. Ruthenium-based complexes have been successful artificial molecular catalysts for mimicking this reaction. However, for practical and large-scale applications in the future, molecular catalysts that contain earth-abundant first-row transition metal ions are preferred owing to their high natural abundance, low risk of depletion, and low costs. In this review, the frontier of water oxidation reactions mediated by first-row transition metal complexes is described. Special attention is paid towards the design of molecular structures of the catalysts and their reaction mechanisms, and these factors are expected to serve as guiding principles for creating efficient and robust molecular catalysts for water oxidation using ubiquitous elements.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Selective photocatalytic production of CH4 using Zn-based polyoxometalate as a nonconventional CO2 reduction catalyst

Efficient and selective production of CH₄ through the CO₂ reduction reaction (CO2RR) is a challenging task due to the high amount of energy consumption and various reaction pathways. Here, we report the synthesis of Zn-based polyoxometalate (ZnPOM) and its application in the photocatalytic CO2RR. Unlike conventional Zn-based catalysts that produce CO, ZnPOM can selectively catalyze the production of CH₄ in the presence of an Ir-based photosensitizer (TIr3) through the photocatalytic CO2RR. Photophysical and computation analyses suggest that selective photocatalytic production of CH₄ using ZnPOM and TIr3 can be attributed to (1) the exceptionally fast transfer of photogenerated electrons from TIr3 to ZnPOM through the strong molecular interactions between them and (2) effective transfer of electrons from ZnPOM to *CO intermediates due to significant hybridization of their molecular orbitals. This study provides insights into the design of novel CO2RR catalysts for CH₄ production beyond the limitations in conventional studies that focus on Cu-based materials.

Tafel Slope Analyses for Homogeneous Catalytic Reactions

Tafel analysis of electrocatalysts is essential in their characterization. This paper analyzes the application of Tafel-like analysis to the four-electron nonelectrochemical oxidation of water by the stoichiometric homogeneous 1-electron oxidant [Ru(bpy)3]3+ to dioxygen catalyzed by homogeneous catalysts, [Ru4O4(OH)2(H2O)4(γ-SiW10O36)2]10− (Ru4POM) and [Co4(H2O)2(PW9O34)2]10– (Co4POM). These complexes have slow electron exchange rates with electrodes due to the Frumkin effect, which precludes the use of known electrochemical methods to obtain Tafel plots at ionic strengths lower than 0.5 M. The application of an electron transfer catalyst, [Ru(bpy)3]3+/2+, increases the rates between the Ru4POM and electrode, but a traditional Tafel analysis of such a complex system is precluded due to a lack of appropriate theoretical models for 4-electron processes. Here, we develop a theoretical framework and experimental procedures for a Tafel-like analysis of Ru4POM and Co4POM, using a stoichiometric molecular oxidant [Ru(bpy)3]3+. The dependence of turnover frequency (TOF) as a function of electrochemical solution potential created by the [Ru(bpy)3]3+/[Ru(bpy)3]2+ redox couple (an analog of the Tafel plot) was obtained from kinetics data and interpreted based on the suggested reaction mechanism.

The Reactivity and Stability of Polyoxometalate Water Oxidation Electrocatalysts

This review describes major advances in the use of functionalized molecular metal oxides (polyoxometalates, POMs) as water oxidation catalysts under electrochemical conditions. The fundamentals of POM-based water oxidation are described, together with a brief overview of general approaches to designing POM water oxidation catalysts. Next, the use of POMs for homogeneous, solution-phase water oxidation is described together with a summary of theoretical studies shedding light on the POM-WOC mechanism. This is followed by a discussion of heterogenization of POMs on electrically conductive substrates for technologically more relevant application studies. The stability of POM water oxidation catalysts is discussed, using select examples where detailed data is already available. The review finishes with an outlook on future perspectives and emerging themes in electrocatalytic polyoxometalate-based water oxidation research.

Asymmetric Hybrid Polyoxometalates: A Platform for Multifunctional Redox-Active Nanomaterials

Access to asymmetrically functionalized polyoxometalates is a grand challenge as it could lead to new molecular nanomaterials with multiple or modular functionality. Now, a simple one‐pot synthetic approach to the isolation of an asymmetrically functionalized organic–inorganic hybrid Wells–Dawson polyoxometalate in good yield is presented. The cluster bears two organophosphonate moieties with contrasting physical properties: a chelating metal‐binding group, and a long aliphatic chain that facilitates solvent‐dependent self‐assembly into soft nanostructures. The orthogonal properties of the modular system are effectively demonstrated by controlled assembly of POM‐based redox‐active nanoparticles. This simple, high‐yielding synthetic method is a promising new approach to the preparation of multi‐functional hybrid metal oxide clusters, supermolecular systems, and soft‐nanomaterials.

Recent advances of polyoxometalate-catalyzed selective oxidation based on structural classification

The structural diversity and tenability observed in POMs has encouraged extensive investigations into their catalytic activity. Based on the structural classification of POMs, this review summarizes recent advances relating to POM-catalyzed selective oxidation and places most emphasis on dynamic developments from 2015 onwards. Work which contributes to comparing the catalytic performance of POMs with delicate structural differences (e.g. the same type of POM structure with differences of the heteroatom, addenda, protonated state or counter-ion) and in elucidating the origin/distinction of catalytic activity, as well as reasonable mechanisms, are especially highlighted.

Multi-Tasking POM Systems

Polyoxometalate (POM)-based materials of current interest are summarized, and specific types of POM-containing systems are described in which material facilitates multiple complex interactions or catalytic processes. We specifically highlight POM-containing multi-hydrogen-bonding polymers that form gels upon exposure to select organic liquids and simultaneously catalyze hydrolytic or oxidative decontamination, as well as water oxidation catalysts (WOCs) that can be interfaced with light-absorbing photoelectrode materials for photoelectrocatalytic water splitting.

Enhancing Hydrogen Generation Through Nanoconfinement of Sensitizers and Catalysts in a Homogeneous Supramolecular Organic Framework

Enrichment of molecular photosensitizers and catalysts in a confined nanospace is conducive for photocatalytic reactions due to improved photoexcited electron transfer from photosensitizers to catalysts. Herein, the self-assembly of a highly stable 3D supramolecular organic framework from a rigid bipyridine-derived tetrahedral monomer and cucurbit[8]uril in water, and its efficient and simultaneous intake of both [Ru(bpy)₃ ]²⁺ -based photosensitizers and various polyoxometalates, that can take place at very low loading, are reported. The enrichment substantially increases the apparent concentration of both photosensitizer and catalyst in the interior of the framework, which leads to a recyclable, homogeneous, visible light-driven photocatalytic system with 110-fold increase of the turnover number for the hydrogen evolution reaction.

Coexistence of distinct intramolecular electron transfer pathways in polyoxometalate based molecular triads

Polyoxometalate (POM)-associated charge-separated states, formed by the photoinduced oxidation of a covalently attached photosensitizer and reduction of the POM, have attracted much attention due to the remarkable catalytic properties of the reduced POMs. However, short lifetimes of the POM-associated charge-separated state, which in some cases lead to the backward electron transfer being more rapid than the formation of the charge-separated state itself, are generally observed. Recently, we reported on the first example of a relative long-lived (τ = 470 ns) charge-separated state in a Ru(ii) bis(terpyridine)-POM molecular dyad. In this manuscript, further studies on extended molecular structures - two molecular triads - which contain an additional electron donor, phenothiazine (PTZ) or π-extended tetrathiafulvalene (exTTF), are discussed. We show that the excitation of the photosensitizer leads to the population of two distinct MLCT states, which differ in the distribution of excess electron density on the two distinct tpy ligands. These two MLCT states decay separately and, thus, constitute the starting points for distinct intramolecular electron-transfer pathways leading to the simultaneous population of two partially charge-separated states, i.e. PTZ˙+-Ru(tpy)2˙--POM and PTZ-RuIII(tpy)2-POM˙-. These independent decay pathways are unaffected by the choice of the electron donor. Thus, the initial charge distribution within the coordination environment of the photocenter determines the nature of the subsequent (partially) charge separated state that is formed in the triads. These results might open new avenues to design molecular interfaces, in which the directionality of electron transfer can be tuned by the choice of initial excitation.

Direct detection of the photoinduced charge-separated state in a Ru(ii) bis(terpyridine)-polyoxometalate molecular dyad

Observation of photoinduced intramolecular charge-separation is difficult for photosensitizer-POM dyads because of rapid backward electron transfer. We report here for the first time on a long-lived charge-separated state (τ = 470 ns) observed in a Ru(ii) bis(terpyridine)-based dyad. Charge-separation occurs despite virtually no driving force and the short intrinsic excited-state lifetime of the photosensitizer.

Post-functionalization of a photoactive hybrid polyoxotungstate

A new approach to the development of photoactive hybrid polyoxometalates is reported, combining inorganic and organic functionalisation strategies.

Efficient visible light-driven water oxidation catalysts based on B-β-{BiW8O30} and unique 14-nuclear hetero-metal sandwich unit

A 14-nuclear hetero-metal unit was introduced into {BiW₈} systems, which exhibits unusual catalytic activity for water oxidation under visible light irradiation.

Long rigid ligand induced basket-type phosphomolybdate photo-/electro-catalytic materials

Two long rigid ligands are introduced into {P₆Mo₁₈O₇₃} systems, leading to two unique supramolecular hybrid assemblies, which show highly efficient catalytic activity for the degradation of refractory dye AP under UV light and bifunctional electrocatalytic behavior for the oxidation of dopamine (DA) and reduction of H₂O₂.

Effective photocatalytic and bifunctional electrocatalytic materials based on Keggin arsenomolybdates and different transition metal capped assemblies

V, Co, and Cu were introduced into {AsMo₁₂} system to build three Keggin derivatives with different caps, which show excellent photocatalytic activity and bifunctional electrocatalytic behavior.

Synthesis of new photosensitive H2BBQ2+[ZnCl4]2−/[(ZnCl)2(μ-BBH)] complexes, through selective oxidation of H2O to H2O2

A two-electron photosensitive H₂O to H₂O₂ oxidizer, H₂BBQ²⁺[ZnCl₄]²⁻/[(ZnCl)₂(μ-BBH)], has been synthesized. An aqueous {[(ZnCl)₂(μ-BBH)]||H₂O₂} solar rechargeable galvanic cell has been constructed.

Synthesis and photo-/electro-catalytic properties of a 3D POMOF material based on an interpenetrated copper coordination polymer linked by in situ dual ligands and Dawson-type phosphotungstates

A 3D Keggin POMOF based on a unique Cu/pz/pzc MOF was prepared and employed to degradation of typical dyes.

Earth-Abundant Heterogeneous Water Oxidation Catalysts

Water oxidation is a key chemical transformation for the conversion of solar energy into chemical fuels. Our review focuses on recent work on robust earth-abundant heterogeneous catalysts for the oxygen-evolving reaction (OER). We point out that improvements in the performance of OER catalysts will depend critically on the success of work aimed at understanding reaction barriers based on atomic-level mechanisms. We highlight the challenge of obtaining acid-stable OER catalysts, with proposals for elements that could be employed to reach this goal. We suggest that future advances in solar fuels science will be accelerated by the development of new methods for materials synthesis and characterization, along with in-depth investigations of redox mechanisms at catalytic surfaces.

A self-assembled, multicomponent water oxidation device

Langmuir-Blodgett (LB) and drop-cast (DC) films prepared from [Ru(1)3][PF6]2 and Co4POM (1= 4,4'-bis((n)nonyl)-2,2'-bipyridine, Co4POM = K10[Co4(H2O)2(α-PW9O34)2]) have been evaluated as water oxidation catalysts and their electrocatalytic performances are reported; DC films evolve more O2 per unit area than LB films and the catalyst is stable on an FTO surface for ≈500-600 minutes.

Water oxidation using earth-abundant transition metal catalysts: opportunities and challenges

Catalysts for the oxidation of water are a vital component of solar energy to fuel conversion technologies. This Perspective summarizes recent advances in the field of designing homogeneous water oxidation catalysts (WOCs) based on Mn, Fe, Co and Cu.