Chiral Carborane Acids Decorated with Binol-Based Phosphonates: Synthesis, Characterization, and Application

The syntheses of hexabrominated closo-carborates decorated with different chiral Binol-derived phosphonates and their conjugate acids are described. X-ray diffraction analysis reveals a polymeric structure for the sodium salt with the anionic units connected by [B-Br-Na-O═P]+ linkages. For the acid, coordination of the proton to the phosphonate's P═O oxygen atom is assumed. The pKa value was estimated by combining experiments and computations. Application of these Brønsted acids as chiral catalysts in an imino-ene and a Mukaiyama-Mannich reaction was moderately successful.

Na2B11H13 and Na11(B11H14)3(B11H13)4 as potential solid-state electrolytes for Na-ion batteries

Solid-state sodium batteries have attracted great attention owing to their improved safety, high energy density, large abundance and low cost of sodium compared to the current Li-ion batteries. Sodium-boranes have been studied as potential solid-state electrolytes and the search for new materials is necessary for future battery applications. Here, a facile and cost-effective solution-based synthesis of Na₂B₁₁H₁₃ and Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄ is demonstrated. Na₂B₁₁H₁₃ presents an ionic conductivity in the order of 10^-7 S cm^-1 at 30 °C, but undergoes an order-disorder phase transition and reaches 10^-3 S cm^-1 at 100 °C, close to that of liquids and the solid-state electrolyte Na-β-Al₂O₃. The formation of a mixed-anion solid-solution, Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄, partially stabilises the high temperature structural polymorph observed for Na₂B₁₁H₁₃ at room temperature and it exhibits Na⁺ conductivity higher than its constituents (4.7 × 10^-5 S cm^-1 at 30 °C). Na₂B₁₁H₁₃ and Na₁₁(B₁₁H₁₄)₃(B₁₁H₁₃)₄ exhibit an oxidative stability limit of 2.1 V vs. Na⁺/Na.

Zinc Ammonio-dodecaborates: Synthesis, Lewis Acid Strength, and Reactivity

Two series of zinc salts, [EtZn][A] and Zn[A]₂, with weakly coordinating anions [A]^- as counterions have been prepared, and their activities as catalysts for hydrosilylation reactions of 1-hexene, benzophenone, and acetophenone have been investigated. The counterions and per- and partially chlorinated 1-ammonio-closo-dodecaborate anions [Me₃NB₁₂Cl₁₁]^- [1]^-, [Pr₃NB₁₂H₅Cl₆]^- [2]^-, [Bu₃NB₁₂H₄Cl₇]^- [3]^-, and [Hex₃NB₁₂H₅Cl₆]^- [4]^- were chosen as potential and more readily available alternatives to carborate anions such as [CHB₁₁Cl₁₁]^- and [HexCB₁₁Cl₁₁]^-. The basicity of anion [4]^- was determined as being close to that of the triflimide anion [N(SO₂CF₃)₂]^-, and the fluoride ion affinities (FIAs) of compounds [EtZn][2] and Zn[2]₂ are lower than those of the Lewis acids B(C₆F₅)₃ and Zn[HexCB₁₁Cl₁₁]₂. The higher anion basicity and the resulting lower Lewis acidity of the zinc centers result in low activity in 1-hexene hydrosilylation catalysis and only moderate activity in the hydrosilylation catalysis of benzophenone and acetophenone.

Synthesis of closo-CB11H12- Salts Using Common Laboratory Reagents

Lithium and sodium salts of the closo-carbadodecaborate anion [CB₁₁H₁₂]^- have been shown to form stable solid-state electrolytes with excellent ionic conductivity for all-solid-state batteries (ASSB). However, potential commercial application is currently hindered by the difficult, low-yielding, and expensive synthetic pathways. We report a novel and cost-effective method to synthesize the [CB₁₁H₁₂]^- anion in a 40% yield from [B₁₁H₁₄]^-, which can be synthesized using common laboratory reagents. The method avoids the use of expensive and dangerous reagents such as NaH, decaborane, and CF₃SiMe₃ and shows excellent reproducibility in product yield and purity.

Silylium Ions: From Elusive Reactive Intermediates to Potent Catalysts

The history of silyl cations has all the makings of a drama but with a happy ending. Being considered reactive intermediates impossible to isolate in the condensed phase for decades, their actual characterization in solution and later in solid state did only fuel the discussion about their existence and initially created a lot of controversy. This perception has completely changed today, and silyl cations and their donor-stabilized congeners are now widely accepted compounds with promising use in synthetic chemistry. This review provides a comprehensive summary of the fundamental facts and principles of the chemistry of silyl cations, including reliable ways of their preparation as well as their physical and chemical properties. The striking features of silyl cations are their enormous electrophilicity and as such reactivity as super Lewis acids as well as fluorophilicity. Known applications rely on silyl cations as reactants, stoichiometric reagents, and promoters where the reaction success is based on their steady regeneration over the course of the reaction. Silyl cations can even be discrete catalysts, thereby opening the next chapter of their way into the toolbox of synthetic methodology.

Synthesis of a Counteranion-Stabilized Bis(silylium) Ion

The preparation of a molecule with two alkyl‐tethered silylium‐ion sites from the corresponding bis(hydrosilanes) by two‐fold hydride abstraction is reported. The length of the conformationally flexible alkyl bridge is crucial as otherwise the hydride abstraction stops at the stage of a cyclic bissilylated hydronium ion. With an ethylene tether, the open form of the hydronium‐ion intermediate is energetically accessible and engages in another hydride abstraction. The resulting bis(silylium) ion has been NMR spectroscopically and structurally characterized. Related systems based on rigid naphthalen‐n,m‐diyl platforms can only be converted into the dications when the positively charged silylium‐ion units are remote from each other (1,8 versus 1,5 and 2,6).

On Silylated Oxonium and Sulfonium Ions and Their Interaction with Weakly Coordinating Borate Anions

Attempts have been made to prepare salts with the labile tris(trimethylsilyl)chalconium ions, [(Me3 Si)3 E]+ (E=O, S), by reacting [Me3 Si-H-SiMe3 ][B(C6 F5 )4 ] and Me3 Si[CB] (CB- =carborate=[CHB11 H5 Cl6 ]- , [CHB11 Cl11 ]- ) with Me3 Si-E-SiMe3 . In the reaction of Me3 Si-O-SiMe3 with [Me3 Si-H-SiMe3 ][B(C6 F5 )4 ], a ligand exchange was observed in the [Me3 Si-H-SiMe3 ]+ cation leading to the surprising formation of the persilylated [(Me3 Si)2 (Me2 (H)Si)O]+ oxonium ion in a formal [Me2 (H)Si]+ instead of the desired [Me3 Si]+ transfer reaction. In contrast, the expected homoleptic persilylated [(Me3 Si)3 S]+ ion was formed and isolated as [B(C6 F5 )4 ]- and [CB]- salt, when Me3 Si-S-SiMe3 was treated with either [Me3 Si-H-SiMe3 ][B(C6 F5 )4 ] or Me3 Si[CB]. However, the addition of Me3 Si[CB] to Me3 Si-O-SiMe3 unexpectedly led to the release of Me4 Si with simultaneous formation of a cyclic dioxonium dication of the type [Me3 Si-μO-SiMe2 ]2 [CB]2 in an anion-mediated reaction. DFT studies on structure, bonding and thermodynamics of the [(Me3 Si)3 E]+ and [(Me3 Si)2 (Me2 (H)Si)E]+ ion formation are presented as well as mechanistic investigations on the template-driven transformation of the [(Me3 Si)3 E]+ ion into a cyclic dichalconium dication [Me3 Si-μE-SiMe2 ]2 2+ .

Simple and scalable synthesis of the carborane anion CB11H12. Dalton Trans 2019;48:7499-7502. [PMID: 30912562 DOI: 10.1039/c9dt01062a]

We report a method to obtain carba-closo-dodecaborate anion CB₁₁H₁₂^- from boron cluster B₁₁H₁₄^- in up to 95% yield using difluorocarbene to complete the carborane cluster. Difluorocarbene itself comes from readily available Ruppert-Prakash reagent CF₃SiMe₃. The synthesis is straightforward to carry out in heavy wall glass pressure tubes without the need for a glove-box and is easily scalable to 15 g scale.

Synthesis and Characterization of Silylated Phosphonium [P(OSiMe3)4]+ and Phosphate [O2P(OSiMe3)2]- Salts

Starting from an optimized synthesis of silylated phosphoric acid, OP(OSiMe₃)₃, a borate salt bearing the [P(OSiMe₃)₄]⁺ cation was generated in the reaction of OP(OSiMe₃)₃ with [Me₃Si-H-SiMe₃][B(C₆F₅)₄], isolated, and fully characterized. Analogously to the protonated species, phosphoric acid (H₃PO₄) reaction of OP(OSiMe₃)₃ with a base led to the formation of the unknown [O₂P(OSiMe₃)₂]^- anion, which could be crystallized as potassium salt and structurally characterized, too. Both [P(OSiMe₃)₄]⁺ and [O₂P(OSiMe₃)₂]^- can be regarded as the formal autoprotolysis products of OP(OSiMe₃)₃.