The Template‐Free Synthesis of CuO@CeO 2 Nanospheres: Facile Strategy, Structure Optimization, and Enhanced Catalytic Activity toward CO Oxidation

Ultrasonically assisted surface modified CeO2 nanospindle catalysts for conversion of CO2 and methanol to DMC

This study developed a facile and effective approach to engineer the surface properties of cerium oxide (CeO₂) nanospindle catalysts for the direct synthesis of dimethyl carbonate (DMC) from CO₂ and methanol. CeO₂ nanospindles were first prepared by a simple precipitation method followed by wet chemical redox etching with sodium borohydride (NaBH₄) under high intensity ultrasonication (ultrasonic horn, 20 kHz, 150 W/cm²). The ultrasonically assisted surface modification of the CeO₂ nanospindles in NaBH₄ led to particle collisions and surface reduction that resulted in an increase in the number of surface-active sites of exposed Ce³⁺ and oxygen vacancies. The surface modified CeO₂ nanospindles showed an improvement of catalytic activity for DMC formation, yielding 17.90 mmol·g_cat^-1 with 100 % DMC selectivity. This study offers a simple and effective method to modify a CeO₂ surface, and it can further be applied for other chemical activities.

Electrochemical aptasensor based on Ce3NbO7/CeO2@Au hollow nanospheres by using Nb.BbvCI-triggered and bipedal DNA walker amplification strategy for zearalenone detection

Herein, an electrochemical aptasensor combining Nb.BbvCI-triggered bipedal DNA walking strategy was constructed for ultrasensitive assay of zearalenone (ZEN). The aptasensor used Ce₃NbO₇/CeO₂ @Au hollow nanospheres as electrode modification material and PdNi@MnO₂/MB as the signal label. Importantly, the Ce₃NbO₇/CeO₂ synthesized by hydrothermal method were combined with Au nanoparticles and applied to the electrode surface. The as-prepared Ce₃NbO₇/CeO₂ @Au possessed a large surface area, excellent electrical conductivity, stability and more binding sites. PdNi@MnO₂ with high specific surface area and porosity combined with molecule methylene blue (MB) was introduced into electrodes as the signal label. The proposed aptasensor utilized the advantages of specific recognition of aptamers and target molecules to release bipedal DNA walker (w-DNA), and then the w-DNA was triggered by Nb.BbvCI and entered the cycle to release more signal probes. The feasibility of this strategy was recorded by the differential pulse voltammetry (DPV) method. Under the optimized conditions, the electrochemical aptasensor exhibited a wide linear dynamic range from 1 × 10^-4 to 1 × 10³ ng mL^-1 with a low detection limit of 4.57 × 10^-6 ng mL^-1. Moreover, the aptasensor had high selectivity, good stability, excellent repeatability and provided an effective method for the trace detection of ZEN in real samples.

The noble metals M (M = Pd, Ag, Au) decorated CeO2catalysts derived from solution combustion method for efficient low-temperature CO catalytic oxidation: effects of different M loading on catalytic performances

The noble metal nanoparticles have attracted attention due to their excellent catalytic performance for CO oxidation at low temperatures. M-CeO₂(M = Pd, Ag, Au) catalysts with different atomic ratios of M/Ce were deposited via solution combustion method. Among them, 3 at% Pd-CeO₂, 5 at% Ag-CeO₂and 1 at% Au-CeO₂catalysts have better catalytic performances. Especially, 5 at% Ag-CeO₂catalyst shows better low-temperature CO oxidation performance. The catalytic activity for CO oxidation follows the follows the following sequence: 5 at% Ag-CeO₂(T₅₀ = 69 °C) > 3 at% Pd-CeO₂(T₅₀ = 99 °C) >1 at% Au-CeO₂(T₅₀ = 115 °C). Meanwhile, the catalysts are characterized by means of powder x-ray diffraction, scanning electron microscope, transmission electron microscopy, Raman spectroscopy, x-ray photoelectron spectroscopy, Brunauer-Emmett-Teller and H₂-TPR. The characterization results show that the 5 at% Ag-CeO₂catalyst has excellent catalytic activity due to the good dispersion of Ag nanoparticles, the specific surface area of the material, and the reduction catalyst between different valence ions. Moreover, the surface of the catalyst enhances the mutual synergy, effectively promotes the generation of oxygen vacancies, and increases the active oxygen content of the catalyst surface. Finally, the catalytic mechanism of M-CeO₂catalysts is summarized.

Versatile Synthesis of Pd and Cu Co-Doped Porous Carbon Nitride Nanowires for Catalytic CO Oxidation Reaction

Developing efficient catalyst for CO oxidation at low-temperature is crucial in various industrial and environmental remediation applications. Herein, we present a versatile approach for controlled synthesis of carbon nitride nanowires (CN NWs) doped with palladium and copper (Pd/Cu/CN NWs) for CO oxidation reactions. This is based on the polymerization of melamine by nitric acid in the presence of metal-precursors followed by annealing under nitrogen. This intriguingly drove the formation of well-defined, one-dimensional nanowires architecture with a high surface area (120 m2 g−1) and doped atomically with Pd and Cu. The newly-designed Pd/Cu/CN NWs fully converted CO to CO2 at 149 °C, that was substantially more active than that of Pd/CN NWs (283 °C) and Cu/CN NWs (329 °C). Moreover, Pd/Cu/CN NWs fully reserved their initial CO oxidation activity after 20 h. This is mainly attributed to the combination between the unique catalytic properties of Pd/Cu and outstanding physicochemical properties of CN NWs, which tune the adsorption energies of CO reactant and reaction product during the CO oxidation reaction. The as-developed method may open new frontiers on using CN NWs supported various noble metals for CO oxidation reaction.