Structure and physical properties of oleogels containing peanut oil and saturated fatty alcohols

Effect of Cooling Rate on Properties of Beeswax and Stearic Acid Oleogel Based on Rice Bran Oil and Sesame Oil

This study aimed to investigate how varying cooling rate impacts the characteristics of oleogels prepared using a sesame oil and rice bran oil blend (5:6, w/w) using a combination of beeswax and stearic acid (3:1, w/w at 12%, w/w) as the oleogelators. The study assessed three different cooling rates-0.5, 1.5, and 5 °C/min-with a focus on the attributes of the oleogels. The study revealed that the cooling rate had a substantial impact on the strength of the gel network. The cooling rate of 0.5 °C/min resulted in a higher oil-binding capacity and a stronger gel structure than fast cooling. The thermal properties and molecular interactions of the oleogels were not influenced by the cooling rate. The findings of this study indicated that the characteristics of beeswax and stearic acid oleogel prepared using sesame oil and rice bran oil blend could be tailored by manipulating the cooling rate.

Interfacial crystallized oleogel emulsion with improved freeze-thaw stability and tribological properties: Influence of cooling rate

In this study, the influence of cooling rate on the freeze-thaw stability, rheological and tribological properties of interfacial crystalized oleogel emulsion was investigated. Results showed that slower cooling rate could promote formation of larger crystals and stronger network in oleogels. Additionally, oleogel emulsions showed higher freeze-thaw stability than those stabilized solely by emulsifiers. The slower cooling rate resulted in larger crystals adsorbed at the droplet surface. This led to greater steric hindrance that prevented the migration of oil droplets with higher resistance to disruption by ice crystals. The rheological and tribological measurements suggested that with appropriate amount of crystals, the tribological properties were better maintained for emulsions prepared at slow cooling rate after freeze-thaw treatment. This strategy greatly enriched oleogel emulsion formulations and provided important clues for potential applications in food products involved with freeze-thaw treatment.

Oleo-foams and emulsion-foams as lipid-based foam systems: a review of their formulation, characterization, and applications

Lipid-based foam systems (LBFs) have grown in popularity recently because of their effectiveness and potential uses. As a result, in order to stabilize them, considerable work has been put into developing more biodegradable and environmentally friendly materials. However, the use of natural stabilizing agents has been constrained due to a lack of thorough knowledge of them. This review offers insightful data that will encourage more studies into the development and use of LBFs. Emulsifiers or gelling agents, as well as new preparation and characterization methods, can be used to increase or prolong the functional performance of LBFs. Special emphasis has been given on the connections between their structures and properties and expanding the range of industries in which they can be applied. In conclusion, it is crucial to gain a deeper understanding of the preparation mechanisms and influencing factors in order to improve the quality of foam products and create novel LBFs.

Optimization of Hazelnut Spread Based on Total or Partial Substitution of Palm Oil

Palm oil is widely used in the manufacturing of hazelnut-based spreads due to its unique fatty acid and triacylglycerol profile and, thus, its crystallization behaviour, which makes it suitable for use in fat-based spreadable products. An interesting solution that enables the replacement of palm oil is given by oleogels made with high nutritional quality oil. In this study, the influence of the replacement of palm oil with different glycerol monostearate/olive oil-based oleogels, as well as the influence of the different amounts of GMS employed in oleogel preparation, on the oil binding capacity, spreadability, and rheological and sensory parameters of hazelnut cocoa spreads was investigated. A design of experiment (DoE) approach, with the adoption of the D-optimal design, was used to plan the cocoa hazelnut spread formulations, with the aim being to identify the optimal formulation with desirable quality parameters in terms of Casson's viscosity, spreadability, and oil binding capacity. The resulting optimized formulation was identified in a spread characterized by a total replacement of palm oil with an oleogel made of 95% olive oil and 5% GMS.

Oleofoams stabilized by monoacylglycerides: Impact of chain length and concentration

Oleofoams are plant oil based whipped systems which have drawn academic and industry attention in recent years. The aim of this study was to determine the effect of fatty acid chain length and monoacylglyceride (MAG) concentration on the performance and structural properties of MAG-based oleofoams. Four different MAGs (monolaurin, monomyrystin, monopalmitin, and monostearin) were studied at three concentration levels (5, 10, and 15 wt%). The fatty acid chain length had a statistically significant impact on the size and shape of crystals formed, while higher MAG concentrations led to higher numbers of crystals in the continuous oil phase. These differences affected the performance and physical properties of the oleofoams: compared to other MAGs, monostearin based oleofoams were harder and exhibited higher values of G' and G″, had higher overrun and showed better stability. Lastly, through microscopy techniques it was successfully proved that monostearin-based oleofoams are stabilized by both bulk and Pickering stabilization.

Role of the polyphenol content on the structuring behavior of liposoluble gelators in extra virgin olive oil

The role of polyphenols in affecting the structural and rheological properties of oleogels was investigated. Polyphenols were selectively removed from extra virgin olive oil (EVOO), and the resulting oils at three different polyphenol levels were gelled by using 10% (w/w) of monoglycerides (MG), rice wax (RW), sunflower wax (SW), and a mixture of β-sitosterol/γ-oryzanol (PS). The structural characteristics of oleogels were assessed by visual appearance, rheology, polarized light microscopy, calorimetry, XRD, and FTIR. Polyphenol content differently affected oleogel characteristics depending on network features. While EVOO-polyphenols did not influence PS- and SW-based oleogels, they reinforced MG- and RW-based oleogel network. As polyphenol content increased, the critical stress and melting temperature also increased, concomitantly with changes in crystal morphology. This was attributed to the capacity of polyphenols to form additional junction points in the crystalline network.

Practical scale modification of oleogels by ultrasonic standing waves

Lipid-based materials, such as substitutes for saturated fats (oleogels) structurally modified with ultrasonic standing waves (USW), have been developed by our group. To enable their potential application in food products, pharmaceuticals, and cosmetics, practical and economical production methods are needed. Here, we report scale-up of our procedure of structurally modifying oleogels via the use of USW by a factor of 200 compared to our previous microfluidic chamber. To this end, we compared three different USW chamber prototypes through finite element simulations (FEM) and experimental work. Imaging of the internal structure of USW-treated oleogels was used as feedback for successful development of chambers, i.e., the formation of band-like structures was the guiding factor in chamber development. We then studied the bulk mechanical properties by a uniaxial compression test of the sonicated oleogels obtained with the most promising USW chamber, and sampled local mechanical properties using scanning acoustic microscopy. The results were interpreted using a hyperelastic foam model. The stability of the sonicated oleogels was compared to control samples using automated image analysis oil-release tests. This work enabled the effective mechanical-structural manipulation of oleogels in volumes of 10-100 mL, thus paving the way for USW treatments of large-scale lipid-based materials.

Oleogels prepared with low molecular weight gelators: Texture, rheology and sensory properties, a review

There is a growing need for healthier foods with no trans and reduced saturated fat. However, solid fats play critical roles in texture and sensory attributes of food products, making it challenging to eliminate them in foods. Recently, the concept of oleogelation as a novel oil structuring technique has received numerous attentions owing to their great potential to mimic the properties of solid fats. Understanding textural, rheological and sensory properties of oleogels helps predict the techno-functionalities of oleogels to replace solid fats in food products. This research critically reviews the textural and rheological properties of oleogels prepared by low molecular weight oleogelators (LMWGs) and functional characteristics of foods formulated by these oleogels. The mechanical properties of LMWG-containing oleogels are comprehensively discussed against conventional solid fats. The interactions between the oleogel and its surrounding food matrix are explained, and the sensory attributes of oleogel containing reformulated products are highlighted. Scientific insights into the texture and rheological properties of oleogels manufactured with a wide range of low molecular gelators and their related products are provided in order to boost their implication for creating healthier foods with high consumer acceptability. Future research opportunities on low molecular weight gelators are also discussed.

Controlling oleogel crystallization using ultrasonic standing waves

Oleogels are lipid-based soft materials composed of large fractions of oil (> 85%) developed as saturated and hydrogenated fat substitutes to reduce cardiovascular diseases caused by obesity. Promising oleogels are unstable during storage, and to improve their stability careful control of the crystalline network is necessary. However, this is unattainable with state-of-the-art technologies. We employ ultrasonic standing wave (USSW) fields to modify oleogel structure. During crystallization, the growing crystals move towards the US-SW nodal planes. Homogeneous, dense bands of microcrystals form independently of oleogelator type, concentration, and cooling rate. The thickness of these bands is proportional to the USSW wavelength. These new structures act as physical barriers in reducing the migration kinetics of a liposoluble colorant compared to statically crystallized oleogels. These results may extend beyond oleogels to potentially be used wherever careful control of the crystallization process and final structure of a system is needed, such as in the cosmetics, pharmaceutical, chemical, and food industries.

Structuring of sunflower oil by stearic acid derivatives: Experimental and molecular modelling studies

Structuring of vegetable oils has potential application in food, pharmaceutical and cosmetic products. In this study, structuring effects of stearic acid derivatives on sunflower seed oil were systematically investigated by experimental and molecular simulation methods. Stearic acid (SA), 12-hydroxy stearic acid (HSA) and 2-hydroxyethyl stearate (HES) were able to structure sunflower seed oil, among which the structuring ability of HES was reported for the first time. The oleogel formed with HSA exhibited good mechanical properties (such as hardness, fracturability, adhesiveness, chewiness and storage modulus), which coincided with its highest solid fat content and degree of crystallinity. Oleogels containing SA and HES showed similar mechanical properties. Both the molecular dynamics (MD) simulation and independent gradient model (IGM) confirmed that the HSA dimer possessed the strongest interaction during the self-assembly process while the dimers of HES and SA had similar interactions, which could explain their structuring performance.

Tailoring Properties of Mixed-Component Oleogels: Wax and Monoglyceride Interactions Towards Flaxseed Oil Structuring

The combination of oleogelators in oil structuring has an untapped potential, since effective pairs have usually been found by serendipity. The aim of this work was to evaluate the combination of berry (BEW) or sunflower wax (SHW) with glycerol monostearate (GMS) in flaxseed oil (FXO) at 5 and 25 °C. The thermal and mechanical properties, microstructure, and stability of oleogels were investigated. Self-standing and translucent gels were obtained from BEW in FXO. However, the mixture BEW:GMS resulted in a decrease of dynamic moduli. Moreover, changes in the crystal network and a reduction of oil binding capacity were noticed. Thus, the GMS prevented the complete organization of BEW in polyunsaturated chains of FXO. Conversely, a positive interaction was found for GMS:SHW, since both alone were not able to impart the structure in FXO. Interestingly, gel was formed with improved properties, even with a small addition of GMS, although an ideal ratio of 1:1 (GMS50:50SHW) was found. Oxidative stability analysis showed that all gels resembled the behavior of liquid oil (~12.00 meqO₂/kg) over 30 days storage. Therefore, semi-solid systems with nutritional and techno-functional claims were created by using waxes and fatty-acid derivative oleogelator in a rational fashion; this opened the opportunity to tailor oleogel properties.

Effect of the ratio between behenyl alcohol and behenic acid on the oleogel properties

HYPOTHESIS

In oleogel food systems (based on the mixture between stearic acid and stearyl alcohol) the strong effect of the weight ratio (R) between these two components on the textural and structural properties is well described. The effect of R for other fatty acids and fatty alcohols is less explored. Moreover, they do not show an enhancement of the oleogel properties for specific R. The effect of R on the oleogel properties, for a mixture of fatty acid and fatty alcohol with longer alkyl chains (behenyl alcohol and behenic acid) in sunflower and soybean oils, which are raw materials widely used in cosmetic and pharmaceutical industries, was investigated.

EXPERIMENTS

We characterized the oleogel properties as a function of R in terms of structuring potential: hardness, oil loss and gel stability. This information was correlated with microstructural data obtained at different length scales by coupling optical microscopy, DSC, SFC, SAXS and WAXS experiments.

FINDINGS

Our results highlight that R tunes the oleogel properties in a comparable manner to previous results obtained for stearic acid and stearyl alcohol-based oleogels. Two specific R (8:2 and 7:3) close to the 3:1 molecular ratio gave oleogels with both the highest hardness and stability. The morphology and size of the mixed crystals obtained for these R cannot solely explain why they are stronger gels with low oil loss in comparison to the other R. The almost complete crystallization for these two R is one of the key parameters controlling the oleogel properties. As described in the literature, we also suggest that the differences in oleogel properties come from the spatial distribution of the crystalline mass. In this study, we confirm that the effect of the 3:1 molecular ratio in mixed surfactant systems described more than 50 years ago for foams, emulsions and Langmuir monolayers occurs also on the crystallization of mixed fatty alcohol and fatty acid in oils leading to better oleogels properties.