Copper Iodide as a Recyclable Catalyst for Buchwald N-Arylation

Copper-catalyzed N-arylation of indoles

Abstract:

Over the past decades, the N-arylation of indoles has gained an inevitable role in the fields of material science, pharmaceuticals, and agrochemical industries. They are the basic core skeleton of many natural products. Their synthesis by Ullmann-type C–N coupling reaction of indole derivatives with aryl halides through various catalytic protocols is well explored. Transition metal catalysis was the best method for synthesizing 1-aryl indoles, and copper catalysis is the leading among them. This review comprehends the recent developments in the copper-catalyzed C–N cross-coupling of indoles with aryl halides from 2010 to 2022.

Copper-catalyzed Goldberg-type C-N coupling in deep eutectic solvents (DESs) and water under aerobic conditions

An efficient and selective N-functionalization of amides is first reported via a CuI-catalyzed Goldberg-type C-N coupling reaction between aryl iodides and primary/secondary amides run either in Deep Eutectic Solvents (DESs) or water as sustainable reaction media, under mild and bench-type reaction conditions (absence of protecting atmosphere). Higher activities were observed in an aqueous medium, though the employment of DESs expanded and improved the scope of the reaction to include also aliphatic amides. Additional valuable features of the reported protocol include: (i) the possibility to scale up the reaction without any erosion of the yield/reaction time; (ii) the recyclability of both the catalyst and the eutectic solvent up to 4 consecutive runs; and (iii) the feasibility of the proposed catalytic system for the synthesis of biologically active molecules.

Copper-catalyzed N-arylation of pyrroles: an overview

The copper-catalyzed N-arylation of pyrroles has attracted great attention in organic synthesis due to its wide applications in medicinal chemistry, natural products, etc. Here, we summarize the overall advances in the copper-catalyzed C–N cross-coupling of pyrroles with aryl halides.

Cu(i) based catalysts derived from bidentate ligands and studies on the effect of substituents for N-arylation of benzimidazoles and indoles

Four Cu(i) complexes [Cu(L^1–4)(Cl)(PPh₃)] (C1–C4) were synthesized, characterized and crystal structure of C1 was determined. Complexes were utilized as catalysts for N-arylation reaction. Probable mechanism for N-arylation reaction was proposed.

Hydrochloric Acid-Promoted Intermolecular 1,2-Thiofunctionalization of Aromatic Alkenes

An efficient method for making 1,2-thiofunctionalized products via the difunctionalization of aromatic alkenes was developed. In this method, cheap and readily available hydrochloric acid was used to promote 1,2-thiofunctionalization of aryl alkenes with N-arylsulfenylphthalimide and different types of nucleophiles. Importantly, extension of nucleophiles can reach aryl ethers, indoles, and carboxylic acids with good reactivity. This practical and convenient method has broad substrate scope and high yields under metal-free and mild conditions. Furthermore, we achieved conversion and application for making sulfoxide and sulfone by oxidation.

A efficient protocol for the synthesis of thioamides in [DBUH][OAc] at room temperature

A novel, simple and eco-friendly method to synthesize thioamides from aryl nitriles and sodium sulfide (Na₂S·9H₂O) catalyzed by 1,8-diazabicyclo[5,4,0]undec-7-enium acetate ([DBUH][OAc]) ionic liquid (IL) at room temperature was developed in this paper.

Room-temperature Cu-catalyzed N-arylation of aliphatic amines in neat water

A room-temperature copper-catalyzed N-arylation of aliphatic amines with great selectivity and substrate scope tolerance in neat water has been developed.

d-Glucose: An Efficient Reducing Agent for a Copper(II)-Mediated Arylation of Primary Amines in Water

A copper-catalyzed Ullmann-type amination with primary amines in water with a combination of copper(II) triflate [Cu(OTf)₂ ], dipivaloylmethane, and d-glucose is reported. The mild conditions and the use of an inexpensive catalyst as well as a renewable feedstock (d-glucose and the surfactant TPGS-750-M, which is derived from vitamin E) make this protocol a safe and convenient strategy for efficient C-N bond formation. This easy-to-handle procedure is extremely competitive compared to palladium-based reactions and may be used to synthesize N-containing molecules, such as drugs or organic light-emitting diodes (OLEDs).

A new synthetic approach to the imidazo[1,5-a]imidazole-2-one scaffold and effective functionalization through Suzuki–Miyaura cross coupling reactions

A pathway to new 7-bromo-1-(4-methoxybenzyl)-5-methyl-imidazo[1,5-a]imidazole-2-one was reported. The synthetic potential of this scaffold was demonstrated by displacing bromine by Suzuki–Miyaura cross-coupling reactions.

Synthesis of indole-annulated sulfur heterocycles using copper-catalysed C–N coupling and palladium-catalysed direct arylation

A simple and efficient method for the synthesis of biologically relevant 5H-benzo[4,5][1,3]thiazino[3,2-a]indoles and 5,7-dihydroisothiochromeno[3,4-b]indoles has been developed via intramolecular copper catalysed Ullmann-type C–N coupling and palladium catalysed direct arylation.

N-(1-Oxy-2-picolyl)oxalamic acids as a new type of O,O-ligands for the Cu-catalyzed N-arylation of azoles with aryl halides in water or organic solvent

A new type of chelators was identified as efficient ligands for promoting Cu-catalyzed N-arylation of azoles with applicability to different solvents.

Exploration of C-H and N-H-bond functionalization towards 1-(1,2-diarylindol-3-yl)tetrahydroisoquinolines

The synthesis of 1,2,3-trisubstituted indoles was investigated. More specifically, straightforward synthetic routes towards 1-(1,2-diarylindol-3-yl)-N-PG-THIQs (PG = protecting group, THIQ = tetrahydroisoquinoline) employing transition metal-catalyzed C-H and N-H-bond functionalization were explored. It was found that the synthesis of the target compounds is strongly dependent on the order of events. Hence, depending on the requirements of a synthetic problem the most suitable and promising pathway can be chosen. Additionally, a new synthetic approach towards 1,2-diarylindoles starting from 1-arylindole could be established in the course of our investigation by using a palladium-catalyzed protocol. Such 1,2-diarylindoles were successfully reacted with N-Boc-THIQ to furnish 1,2,3-trisubstituted indoles as target compounds. Furthermore, regioselective N-arylation of protected and unprotected 1-(indol-3-yl)-THIQs was successfully conducted using either simple iron or copper salts as catalysts.

Synthesis of indole-based functional polymers with well-defined structures via a catalyst-free C–N coupling reaction

Poly(N-arylene diindolylmethane)s with high molecular weights have been synthesized by a catalyst-free C–N coupling reaction, which exhibit outstanding fluorescence and promising cross-linked film-forming ability.

A convenient eco-friendly system for the synthesis of 5-sulfenyl tetrazole derivatives of indoles and pyrroles employing CeCl3·7H2O in PEG-400

The use of CeCl₃·7H₂O in PEG-400 for the convenient synthesis of 5-sulfenyl tetrazoles derived from indoles and pyrroles, is reported. The scope and limitations of the transformation were also studied.

Copper(I) complexes with trispyrazolylmethane ligands: synthesis, characterization, and catalytic activity in cross-coupling reactions

Three novel Cu(I) complexes bearing tris(pyrazolyl)methane ligands, Tpm(x), have been prepared from reactions of equimolar amounts of CuI and the ligands Tpm, (HC(pz)(3)), Tpm*, (HC(3,5-Me(2)-pz)(3)), and Tpm(Ms), (HC(3-Ms-pz)(3)). X-ray diffraction studies have shown that the Tpm and Tpm(Ms) derivatives exhibit a 2:1 Cu:ligand ratio, whereas the Tpm* complex is a mononuclear species in nature. The latter has been employed as a precatalyst in the arylation of amides and aromatic thiols with good activity. The synthesis of a Tpm*Cu(I)-phthalimidate, a feasible intermediate in this catalytic process, has also been performed. Low temperature (1)H NMR studies in CDCl(3) have indicated that this complex exists in solution as a mixture of two, neutral and ionic forms. Conductivity measurements have reinforced this proposal, the ionic form predominating in a very polar solvent such as DMSO. The reaction of Tpm*Cu(I)-phthalimidate with iodobenzene afforded the expected C-N coupling product in 76% yield accounting for its role as an intermediate in this transformation.

Nano-CuFe2O4 as a magnetically separable and reusable catalyst for the synthesis of diaryl/aryl alkyl sulfides via cross-coupling process under ligand-free conditions

An efficient protocol was developed for the CuFe(2)O(4) nanopowder-catalyzed aryl-sulfur bond formation between aryl halide and thiol/disulfide. A variety of aryl sulfides were synthesized in impressive yields with good chemoselectivity and functional group tolerance in the presence of a catalytic amount of CuFe(2)O(4), Cs(2)CO(3) as base, in nitrogen atmosphere, under ligand-free conditions, in DMSO as solvent at 100 °C. The catalyst is air-stable, inexpensive, magnetically separable and recyclable up to four cycles.

Recyclable heterogeneous copper oxide on alumina catalyzed coupling of phenols and alcohols with aryl halides under ligand-free conditions

An efficient alumina-supported CuO-catalyzed O-arylation of phenols and aliphatic alcohols with various aryl as well as heteroaryl halides under ligand-free conditions are reported. This protocol provides a variety of diaryl ether and bis-diaryl ether motifs by reacting different aryl/aliphatic halides with differently substituted phenols and saturated alcohols in the presence of a catalytic amount of CuO on alumina and KOH as a base at moderate temperature under nitrogen atmosphere. The described methodology is simple, straightforward and efficient to afford the cross-coupled products in high yields under ligand-free conditions. The explored catalyst is inexpensive, air-stable and recyclable up to three cycles.