Facile Synthesis of Dithienobenzothiadiazoles and D18-Cl Polymer via Na2S-Mediated Rapid Thiophene-Annulations for Organic Solar Cells

We present a novel synthetic route for the rapid construction of dithieno[3',2':3,4;2'',3'':5,6]benzo[1,2-c][1,2,5]thiadiazoles via Na2S-promoted thiophene annulation. This method facilitated the synthesis of D18-Cl polymer, known for its efficacy as a polymer donor in bulk-heterojunction polymer solar cells. Starting from commercially available 4,7-dihalo-5,6-difluorobenzo[c][1,2,5]thiadiazole, various 4,7-dialkynylated compounds were obtained through Sonogashira reaction conditions. Subsequent Na2S-promoted thiophene annulations yielded DTBT and its derivatives in excellent yields within 10 minutes. DTBT was then utilized as a precursor for the concise synthesis of D18-Cl, benefiting from reduced synthetic steps, mild reaction conditions, decreased complexity, and high overall yields. In another route, a space group-bridged DTBT was directly constructed via Na2S-promoted thiophene annulations and converted into D18-Cl through a couple of steps. This developed protocol offers a straightforward and reliable synthetic tool, conducive to reducing complexities in the production of DTBT-based organic electronic materials, thereby advancing the potential commercialization of organic solar cells.

Flexible Approach for the Synthesis of Annulated 4H-Pyrans Based on a Cu(I)-Catalyzed C-Allylation/O-Vinylation Reaction of Cyclic 1-Bromoallyl Tosylates with Cyclic and Acyclic 1,3-Dicarbonyls

The Cu(I)-catalyzed reaction between five-, six-, seven-, and eight-membered cyclic 1-bromoallyl tosylates and five- and six-membered cyclic 1,3-dicarbonyls in DMF at 80 °C using Cs₂CO₃ as a base and 2-picolinic acid as an additive selectively delivers a wide array of bisannulated 4H-pyrans in a single step with yields up to 92%. The transformations are considered to proceed as intermolecular C-allylations/intramolecular O-vinylations. With six-membered cyclic 1-bromoallyl tosylates and acyclic β-ketoesters as substrates, the corresponding 5,6,7,8-tetrahydro-4H-chromene-3-carboxylates are obtained with yields up to 59%.

Recent Advances in the Tandem Copper-Catalyzed Ullmann-Goldberg N-Arylation–Cyclization Strategies

N‒Aryl bond formation under copper catalysis has been playing a pivotal role and has been extensively used as a key step in the total syntheses of several therapeutic molecules. The...

Tandem copper catalyzed regioselective N-arylation-amidation: synthesis of angularly fused dihydroimidazoquinazolinones and the anticancer agent TIC10/ONC201

Herein, we present a copper-catalyzed tandem reaction of 2-aminoimidazolines and ortho-halo(hetero)aryl carboxylic acids that causes the regioselective formation of angularly fused tricyclic 1,2-dihydroimidazo[1,2-a]quinazolin-5(4H)-one derivatives. The reaction involved in the construction of the core six-membered pyrimidone moiety proceeded via regioselective N-arylation-condensation. The presented protocol been successfully applied to accomplish the total synthesis of TIC10/ONC201, which is an active angular isomer acting as a tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL): a sought after anticancer clinical agent.

Highly chemoselective deoxygenation of N-heterocyclic N-oxides under transition metal-free conditions

Because their site-selective C-H functionalizations are now considered one of the most useful tools for synthesizing various N-heterocyclic compounds, the highly chemoselective deoxygenation of densely functionalized N-heterocyclic N-oxides has received much attention from the synthetic chemistry community. Here, we provide a protocol for the highly chemoselective deoxygenation of various functionalized N-oxides under visible light-mediated photoredox conditions with Na2-eosin Y as an organophotocatalyst. Mechanistic studies imply that the excited state of the organophotocatalyst is reductively quenched by Hantzsch esters. This operationally simple technique tolerates a wide range of functional groups and allows high-yield, multigram-scale deoxygenation.

Metal and Non-Metal Catalysts in the Synthesis of Five-Membered S-Heterocycles

BACKGROUND

A wide variety of biological activities are exhibited by N, O and S containing heterocycles and recently, many reports appeared for the synthesis of these heterocycles. The synthesis of heterocycles with the help of metal and non-metal catalyst has become a highly rewarding and important method in organic synthesis. This review article concentrated on the synthesis of S-heterocylces in the presence of metal and non-metal catalyst. The synthesis of five-membered S-heterocycles is described here.

OBJECTIVE

There is a need for the development of rapid, efficient and versatile strategy for the synthesis of heterocyclic rings. Metal, non-metal and organocatalysis involving methods have gained prominence because traditional conditions have disadvantages such as long reaction times, harsh conditions and limited substrate scope.

CONCLUSION

The metal-, non-metal-, and organocatalyst assisted organic synthesis is a highly dynamic research field. For ßthe chemoselective and efficient synthesis of heterocyclic molecules, this protocol has emerged as a powerful route. Various methodologies in the past few years have been pointed out to pursue more sustainable, efficient and environmentally benign procedures and products. Among these processes, the development of new protocols (catalysis), which avoided the use of toxic reagents, are the focus of intense research.

Metal-free synthesis of 1,N6-ethenoadenines from N6-propargyl-adenines via NIS mediated radical cascade reaction

In the present paper, an efficient approach for the construction of 1,N⁶-ethenoadenines from conveniently prepared N⁶-propargyl-adenines is developed. This reaction merges N-iodosuccinimide radical initiation and aerobic aminooxygenation in dioxane. This mild, 5-exo-dig, and metal-free cascade reaction could be applied to a wide substrate scope to provide 1,N⁶-ethenoadenines in moderate to good yields. The reaction mechanism was proposed and tested using radical inhibitor (butylated hydroxytoluene) and isotopic labelling (¹⁸O₂) experiments.

An efficient approach for the construction of 1,N⁶-ethenoadenines is developed through the metal-free mediated radical cascade cyclization of conveniently prepared N⁶-propargyl-adenines.

Synthesis and anticholinesterase activity of 2-substituted-N-alkynylindoles

In this paper, we report a protocol for the preparation of 2-substituted-N-alkynylindoles via metalation of N-alkynylindoles followed by the capture of a 2-indolyl lithium intermediate with different electrophiles. The reactivity of the indoles prepared was also demonstrated through the reaction with CBr4/Ph3P for the preparation of 2-gem-dibromovinyl N-alkynylindoles and the hydrotelluration reaction of N-alkynylindoles, which led to vinylic tellurides. Some compounds prepared showed AChE inhibitory potential in the low micromolar range similar to that obtained with donepezil, a commercially available cholinesterase inhibitor.

Intramolecular Nucleophilic Substitution of ω-Haloalkylphosphine Derivatives

ω-Haloalkylphosphine derivatives undergo the intramolecular nucleophilic substitution reaction upon treatment with a strong base, yielding either cycloalkylphosphine derivatives or heterocyclic phosphine derivatives. The selectivity of the cyclization of (ω-haloalkyl)alkylarylphosphine derivatives depends strongly on the distance between the electrophilic and nucleophilic carbon atoms and the structure of the phosphorus moiety. The desymmetrization of dimethylphenylphosphine sulfide followed by haloalkylation and cyclization led to the enantiomerically enriched tertiary phosphine sulfide, possessing a cyclohexyl fragment at the phosphorus.

Racemic hemiacetals as oxygen-centered pronucleophiles triggering cascade 1,4-addition/Michael reaction through dynamic kinetic resolution under iminium catalysis. Development and mechanistic insights

2-Hydroxydihydropyran-5-ones behave as excellent polyfunctional reagents able to react with enals through oxa-Michael/Michael process cascade under the combination of iminium and enamine catalysis. These racemic hemiacetalic compounds are used as unconventional O-pronucleophiles in the initial oxa-Michael reaction, also leading to the formation of a single stereoisomer under a dynamic kinetic resolution (DKR) process. Importantly, by using β-aryl or β-alkyl substituted α,β-unsaturated substrates as initial Michael acceptors either kinetically or thermodynamically controlled diastereoisomers were formed with high stereoselection through the careful selection of the reaction conditions. Finally, a complete experimental and computational study confirmed the initially proposed DKR process during the catalytic oxa-Michael/Michael cascade reaction and also explained the kinetic/thermodynamic pathway operating in each case.

Chemoselective acylation of benzimidazoles with phenylacetic acids under different Cu catalysts to give fused five-membered N-heterocycles or tertiary amides

C-N bond formation via a copper-catalyzed aerobic oxidative decarboxylative tandem protocol was realized. The phenylacetic acids which contain ortho-X (X = F or Br) on the aromatic ring will render a fused five-membered heterocycle via a tandem aromatic nucleophilic substitution and aerobic oxidative decarboxylative acylation at the C(sp(2))-H bond of benzimidazoles under the Cu(OAc)2/K2CO3/BF3·Et2O catalytic system, while with CuBr as the catalyst and pyridine as the base, N-acylation occurred and tertiary amides were obtained.

Auto-Tandem Catalysis in Ionic Liquids: Synthesis of 2-Oxazolidinones by Palladium-Catalyzed Oxidative Carbonylation of Propargylic Amines in EmimEtSO₄

A convenient carbonylative approach to 2-oxazolidinone derivatives carried out using an ionic liquid (1-ethyl-3-methylimidazolium ethyl sulfate, EmimEtSO₄) as the solvent is presented. It is based on the sequential concatenation of two catalytic cycles, both catalyzed by the same metal species (auto-tandem catalysis): the first cycle corresponds to the oxidative monoaminocarbonylation of the triple bond of propargylic amines to give the corresponding 2-ynamide intermediates, while the second one involves the cyclocarbonylation of the latter to yield 2-(2-oxooxazolidin-5-ylidene)-acetamides. Reactions are carried out using a simple catalytic system consisting of PdI₂ in conjunction with an excess of KI, and the catalyst/solvent system could be recycled several times without appreciable loss of activity after extraction of the organic product with Et₂O.

Single-Flask Multicomponent Palladium-Catalyzed α,γ-Coupling of Ketone Enolates: Facile Preparation of Complex Carbon Scaffolds

A three-component palladium-catalyzed reaction sequence has been developed in which γ-substituted α,β-unsaturated products are obtained in a single flask by an α-alkenylation with either a subsequent γ-alkenylation or γ-arylation of a ketone enolate. Coupling of a variety of electronically and structurally different components was achieved in the presence of a Pd/Q-Phos catalyst (2 mol %), usually at 22 °C with yields of up to 85 %. Most importantly, access to these products is obtained in one simple operation in place of employing multiple reactions.

Palladium nanoparticles in glycerol: a clear-cut catalyst for one-pot multi-step processes applied in the synthesis of heterocyclic compounds

Palladium/TPPTS nanoparticles in glycerol represent a versatile catalyst leading to a large variety of heterocycles through domino/sequential one-pot approaches.

Tandem copper (Cu) catalysed N-arylation–vinylogous nitroaldol condensation of 3,5-disubstituted 4-nitropyrazoles

A tandem process involving copper catalysed N-arylation and vinylogous nitroaldol condensation is described.