Chitosan: An Upgraded Polysaccharide Waste for Organocatalysis

Biomedical applications of aptamer-modified chitosan nanomaterials: An updated review

Among polysaccharides of environmental and economic interest, chitosan (CS) is receiving much attention, particularly in the food and biotechnology industries to encapsulate active food ingredients and immobilize enzymes. CS nanoparticles (CS NPs) combine the intrinsic beneficial properties of both natural polymers and nanoscale particles such as quantum size effect, biocompatibility, biodegradability, and ease of modification, and have great potential for bioimaging, drug delivery, and biosensing applications. Aptamers are single-stranded oligonucleotides that can fold into predetermined structures and bind to the corresponding biomolecules. They are mainly used as targeting ligands in biosensors, disease diagnostic kits and treatment strategies. They can deliver contrast agents and drugs into cancer cells and tissues, control microorganism growth and precisely target pathogens. Aptamer-conjugated CS NPs can significantly improve the efficacy of conventional therapies, minimize their side effects on normal tissues, and overcome the enhanced permeability retention (EPR) effect. Further, aptamer-conjugated carbohydrate-based nanobiopolymers have shown excellent antibacterial and antiviral properties and can be used to develop novel biosensors for the efficient detection of antibiotics, toxins, and other biomolecules. This updated review aims to provide a comprehensive overview of the bioapplications of aptamer-conjugated CS NPs used as innovative diagnostic and therapeutic platforms, their limitations, and potential future directions.

Ionic Liquid Modified SPION@Chitosan as a Novel and Reusable Superparamagnetic Catalyst for Green One-Pot Synthesis of Pyrido[2,3-d]pyrimidine-dione Derivatives in Water

In this paper, the chitosan-functionalized ionic liquid is modified with superparamagnetic iron oxide nanoparticles to form a novel and reusable catalyst (SPION@CS-IL), which was carried out using an ultrasonic promoted approach. Transmission electron microscopy (TEM), vibrating-sample magnetometer (VSM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and thermogravimetric analysis (TGA) are some of the techniques that are used to fully characterize SPION@CS-IL. The created nanoparticles were discovered to be a reusable heterogeneous superparamagnetic catalyst for the environmentally friendly one-pot synthesis of pyrido[2,3-d]pyrimidine derivatives using a simple three-component reaction approach involving thiobarbituric acid, 4-hydroxy coumarin, and various aromatic aldehydes. The method is studied by performing the reaction under ultrasonic irradiation, while the approach is a “green” method, it uses water as the solvent. The isolated yields of the synthesized products are very advantageous. The catalyst has outstanding reusability and is easily removed from the products via filtration (5 runs). Short reaction times, low catalyst loadings, the nanocatalyst’s capacity to be recycled five times, and the absence of harmful chemical reagents are all significant benefits of this environmentally benign process.

An Overview of Metal-free Sustainable Nitrogen-based Catalytic Knoevenagel Condensation Reaction ‎

Knoevenagel condensation reaction counts as a vital condensation in organic chemistry due to the synthesis of valuable intermediates, ‎heterocycles, and fine chemicals from commercially available reactants through forming new C=C...

Synthesis and Applications of Carbohydrate-Based Organocatalysts

Organocatalysis is a very useful tool for the asymmetric synthesis of biologically or pharmacologically active compounds because it avoids the use of noxious metals, which are difficult to eliminate from the target products. Moreover, in many cases, the organocatalysed reactions can be performed in benign solvents and do not require anhydrous conditions. It is well-known that most of the above-mentioned reactions are promoted by a simple aminoacid, l-proline, or, to a lesser extent, by the more complex cinchona alkaloids. However, during the past three decades, other enantiopure natural compounds, the carbohydrates, have been employed as organocatalysts. In the present exhaustive review, the detailed preparation of all the sugar-based organocatalysts as well as their catalytic properties are described.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Chitosan as a chiral ligand and organocatalyst: preparation conditions–property–catalytic performance relationships

Properties of chitosan prepared by alkaline deacetylation of chitin under various conditions were correlated with their performance as ligands or organocatalysts in asymmetric catalytic reactions.

Valorization of Waste: Sustainable Organocatalysts from Renewable Resources

One of the greatest challenges facing our society is to reconcile our need to develop efficient and sophisticated chemical processes with the limited resources of our planet and its restricted ability to adsorb pollution. Organocatalysis has allowed many issues to be addressed in the development of sophisticated, but less polluting, processes. However, minimizing waste also means an efficient utilization of raw and renewable materials. Waste biomass represents an alternative to conventional petroleum-based chemical manufacturing and is a highly attractive renewable resource for the production of chemicals and high-value-added organocatalysts. Recent achievements in the use of renewable biomass feedstocks for the synthesis of organocatalysts are presented. Their application in synthetic methodologies, including multicomponent reactions, which are performed under solvent-free conditions or in eco-friendly reaction media, as well as recycling and reusing the organocatalysts, is illustrated. A few pioneering examples that demonstrate the potential of these promoters in asymmetric synthesis have also been documented. In particular, this review covers examples on the use of hetero- and homogeneous organocatalysts derived from 1) waste biopolymers, such as chitosan, alginic acid, and cellulose; ii) renewable platform molecules, such as levoglucosenone, isosorbide, mannose, d-glucosamine, and lecithin; 3) terpenes and rosin, such as pinane, isosteviol, and abietic acid; and iv) natural proteins (gelatin, bovine tendons, silk fibroin proteins).

Chitosan nanofiber-catalyzed highly selective Knoevenagel condensation in aqueous methanol

A chitosan nanofiber (CsNF)-catalyzed Knoevenagel reaction in green solvent, namely aqueous methanol, was investigated. CsNFs solely catalyzed the desired C–C bond formations in high yield with high selectivity, while conventional small-molecule amines, such as n-hexylamine and triethylamine, inevitably promoted transesterification to produce a large amount of solvolysis byproducts. Structural and chemical analyses of CsNFs suggested that the unique nanoarchitecture, in which chitosan molecules were bundled to ensure the high accessibility of substrates to catalytic sites, was critical to the highly efficient Knoevenagel condensation. The products were obtained in high purity without solvent-consuming purification, and the CsNF catalyst was easily removed and recycled. This study highlights a novel and promising function of CsNFs in green catalysis as emerging polysaccharide-based nanofibers.

Chitosan nanofibers bearing abundant and accessible amines exposed on the solid surface catalyze a highly selective Knoevenagel condensation in green solvent, which completely avoids the formation of solvolysis byproducts.

Chitosan: A Natural and Sustainable Polymeric Organocatalyst for C-C Bond Formation During the Synthesis of 5-amino-2,3-dihydrobenzo[d] thiazole-4,6-dicarbonitriles

Background:

A green, recyclable and reusable chitosan catalyst has been utilized for the synthesis of 5-amino-2,3-dihydrobenzo[d]thiazole-4,6-dicarbonitrile and its derivatives.

Methods and Results:

Three-component reaction protocol incorporates the reaction of aldehydes, malononitrile and rhodanine derivatives. This is examined as an efficient route for the synthesis of dicarbonitriles utilizing a green, biodegradable, environmentally benign, and easily available chitosan catalyst. In the reported protocol, catalyst can be recycled and not any substantial dropping in its catalytic activity during the recycling steps was obtained.

Conclusion:

A green and environmentally benign, one pot three-component protocol has been illustrated for the synthesis of 5-amino-2,3-dihydrobenzo[d]thiazole-4,6-dicarbonitrile derivatives. Adequately yield products were gained via the natural catalytic approach with the recyclability of the catalyst. The use of chitosan represents this procedure as an attractive substitute for the synthesis of biaryls complex by multicomponent reaction condition.

Kinetic evaluation of chitosan-derived catalysts for the aldol reaction in water

The reaction rate and stability of chitosan as heterogeneous amine catalyst is quantified in a batch and continuous-flow aldol reaction.

Interfacial Hydrolysis of Acetals on Protonated TEMPO-oxidized Cellulose Nanofibers

2,2,6,6-Tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNs), which have a high-density of exposed carboxylic acid groups on their crystalline surfaces, effectively act as acid catalysts in acetal hydrolysis. Carboxy-free cellulose nanofibers, polymeric carboxylic acids, and homogeneous acetic acid do not show significant catalytic activity under the same reaction conditions. Mercerized TOCNs differing from the original TOCNs in a crystalline structure were also ineffective, which suggests that the unique nanoarchitectural features of TOCNs, such as regularly aligned carboxylic acid groups, large specific surface areas, and structural rigidity, must be major factors in the acceleration of acetal hydrolysis. Kinetic analysis suggested that substrates and/or acid catalyst species were concentrated on the TOCN crystalline surfaces, which significantly enhanced the catalytic activity.

3D-macroporous chitosan-based scaffolds with in situ formed Pd and Pt nanoparticles for nitrophenol reduction

3D-macroporous chitosan-based scaffolds (cryogels) were produced via growth of metal-polymer coordinated complexes and electrostatic interactions between oppositely charged groups of chitosan and metal ions under subzero temperatures. A mechanism of reduction of noble metal complexes inside the cryogel walls by glutaraldehyde is proposed, which produces discrete and dispersed noble metal nanoparticles. 3D-macroporous scaffolds prepared under different conditions were characterised using TGA, FTIR, nitrogen adsorption, SEM, EDX and TEM, and the distribution of platinum nanoparticles (PtNPs) and palladium nanoparticles (PdNPs) in the material assessed. The catalytic activity of the in situ synthesised PdNPs, at 2.6, 12.5 and 21.0 μg total mass, respectively, was studied utilising a model system of 4-nitrophenol reduction. The kinetics of the reaction under different conditions (temperature, concentration of catalyst) were examined, and a decrease of catalytic activity was not observed over 17 treatment cycles. Increasing the temperature of the catalytic reaction from 10 to 22 and 35 °C by PdNPs supported within the cryogel increased the kinetic rate by 44 and 126%, respectively. Turnover number and turnover frequency of the PdNPs catalysts at room temperature were in the range 0.20-0.53 h^-1. The conversion degree of 4-nitrophenol at room temperature reached 98.9% (21.0 μg PdNPs). Significantly less mass of palladium nanoparticles (by 30-40 times) was needed compared to published data to obtain comparable rates of reduction of 4-nitrophenol.

Homochiral metal–organic frameworks as heterogeneous catalysts

Homochiral metal–organic frameworks (HMOFs) are attractive materials for asymmetric catalysis because they possess high surface area and uniform active sites.

New Developments in Chiral Cooperative Ion Pairing Organocatalysis by Means of Ammonium Oxyanions and Fluorides: From Protonation to Deprotonation Reactions

This personal account summarizes our contribution to the ion pairing organocatalysis mainly by use of chiral quaternary or tertiary ammonium fluorides, aryloxides and carboxylates. Starting from an experimental observation, we were able to develop several approaches for the enantioselective protonation of silyl enolates and enol esters giving rise to chiral carbonyl compounds bearing a stereogenic center at the α-position. Moving from protonation to deprotonation reactions, chiral ammonium ion pair catalysts were successfully applied to several asymmetric transformations such as an Henry reaction or a direct vinylogous aldol reaction to cite a few. An outlook of further possible developments in this field of research will also be discussed.

Shell Biorefinery: Dream or Reality?

Shell biorefinery, referring to the fractionation of crustacean shells into their major components and the transformation of each component into value-added chemicals and materials, has attracted growing attention in recent years. Since the large quantities of waste shells remain underexploited, their valorization can potentially bring both ecological and economic benefits. This Review provides an overview of the current status of shell biorefinery. It first describes the structural features of crustacean shells, including their composition and their interactions. Then, various fractionation methods for the shells are introduced. The last section is dedicated to the valorization of chitin and its derivatives for chemicals, porous carbon materials and functional polymers.

Harvesting of microalgae cell using oxidized dye wastewater

In this study, oxidized dye wastewaters were tested for their potential to be used as a cheap coagulant for microalgae harvesting. Two dyes (methylene blue (MB) and methyl orange (MO)) were selected as model dyes, and the Fenton-like reaction under high temperature (90 °C, 1 min) employed as an oxidative treatment option. A maximum harvesting efficiency over 90% was obtained with both MB and MO at a dilution ratio of 5:1 (dye wastewater: cell culture), when the optimal oxidation condition was 20 mg/L of dye, 1 mM of FeCl3, and 0.5% of H2O2 concentration. This phenomenon could be explained by the possibility that amine groups are formed and exposed in oxidized dyes, which act as a kind of amine-based coagulant just like chitosan. This study clearly showed that dye wastewater, when properly oxidized, could serve as a potent coagulant for microalgae harvesting, potentially rendering the harvesting cost reduced to a substantial degree.