Mechanochemical Solvent-Free Conditions for the Synthesis of Pillar[5]arene-Containing [2]Rotaxanes

Diastereoselective Polypseudorotaxane Formation with Planar Chiral Pillar[5]arenes via Co-crystallization Processes

As the number of chiral ring molecules in chiral polyrotaxane increases, the number of possible stereoisomers exponentially increases. Consequently, the selective synthesis of a specific stereoisomer becomes much more challenging. To address this problem, we co-crystallized poly(ethylene glycol) and a diastereomeric ring molecule, pillar[5]arene, in the solid state. The co-crystallization formed polypseudorotaxanes with a high diastereomeric excess (ca. 88 % de), meaning that polypseudorotaxanes containing (S, pS) stereoisomer pillar[5]arene rings were synthesized selectively. By contrast, in solution and evaporation systems, the selectivity remained low (ca. 10 % de). The results suggested that the packing effect by the co-crystallization contributed to the denser assembly of ring molecules on the polymeric chain, resulting in the diastereoselective formation. High diastereoselectivity was also observed even in higher-molecular-weight poly(ethylene glycol)s. These selectivities arose from the cooperative effects of the ring molecules on the polymeric chain, which were supported by calculating the stabilization energy.

Exciplex Formation by Complexation of an Electron-Accepting Guest in an Electron-Donating Pillar[5]arene Host Liquid

We present a novel system, a liquid-state pillar[5]arene decorated with tri(ethylene oxide) chains, that brings electron-donor and electron-acceptor molecules into proximity for efficient exciplex formation. The electron-accepting guests exhibit a blue-purple emission from a localized excited state upon excitation in common solvents. However, directly dissolving the guests in the electron-donating pillar[5]arene liquid (a bulk system) results in visible green emission from the formed exciplexes. In the bulk system, the guest molecules are always surrounded by excess pillar[5]arene molecules, resulting in the formation of mainly inclusion-type exciplexes. In the bulk system, energy migration occurs between the pillar[5]arene molecules. Excitation of the pillar[5]arenes results in a more intense green exciplex emission than that observed upon direct excitation of the guests. In summary, the pillar[5]arene liquid is a novel system for achieving efficient exciplex formation and energy migration that is different from typical solvent and solid systems.

Solution and Solvent-Free Stopper Exchange Reactions for the Preparation of Pillar[5]arene-containing [2] and [3]Rotaxanes

Diamine reagents have been used to functionalize a [2]rotaxane building block bearing an activated pentafluorophenyl ester stopper. Upon a first acylation, an intermediate host-guest complex with a terminal amine function is obtained. Dissociation of the intermediate occurs in solution and acylation of the released axle generates a [2]rotaxane with an elongated axle subunit. In contrast, the corresponding [3]rotaxane can be obtained if the reaction conditions are appropriate to stabilize the inclusion complex of the mono-amine intermediate and the pillar[5]arene. This is the case when the stopper exchange is performed under mechanochemical solvent-free conditions. Alternatively, if the newly introduced terminal amide group is large enough to prevent the dissociation, the second acylation provides exclusively a [3]rotaxane. On the other hand, detailed conformational analysis has been also carried out by variable temperature NMR investigations. A complete understanding of the shuttling motions of the pillar[5]arene subunit along the axles of the rotaxanes reported therein has been achieved with the help of density functional theory calculations.

Stepwise Functionalization of a Pillar[5]arene-Containing [2]Rotaxane with Pentafluorophenyl Ester Stoppers

Detailed investigations into the stepwise bis-functionalization of a pillar[5]arene-containing rotaxane building block have been carried out. Upon a first stopper exchange, the pillar[5]arene moiety of the mono-acylated product is preferentially located close to its reactive pentafluorophenyl ester stopper, thus limiting the accessibility to the reactive carbonyl group by the nucleophilic reagents. Selective mono-functionalization is thus very efficient. Introduction of a second stopper is then possible to generate dissymmetrical rotaxanes with different amide stoppers. Moreover, when dethreading is possible upon the second acylation, the pillar[5]arene plays the role of a protecting group allowing the synthesis of dissymmetrical axles that are particularly difficult to prepare under statistical conditions. Finally, detailed conformation analysis of the rotaxanes revealed that the position of the pillar[5]arene moiety on its axle subunit is mainly governed by polar interactions in nonpolar organic solvents, whereas solvophobic effects play a major role in polar solvents.

Diastereoselective Rotaxane Synthesis with Pillar[5]arenes via Co-crystallization and Solid-State Mechanochemical Processes

Chiral rotaxanes have attracted much attention in recent decades for their unique chirality based on their interlocked structures. Thus, selective synthesis methods of chiral rotaxanes have been developed. The introduction of substituents with chiral centers to produce diastereomers is a powerful strategy for the construction of chiral rotaxanes. However, in case of a small energy difference between the diastereomers, diastereoselective synthesis is extremely difficult. Herein, we report a new diastereoselective rotaxane synthesis method using solid-phase diastereoselective [3]pseudorotaxane formation and mechanochemical solid-phase end-capping reactions of the [3]pseudorotaxanes. By co-crystallization of stereodynamic planar chiral pillar[5]arene with stereogenic carbons at both rims and axles with suitable end groups and lengths, the [3]pseudorotaxane with a high diastereomeric excess (ca. 92% de) was generated in the solid state because of higher effective molarity with aid by packing effects and significant energy differences between [3]pseudorotaxane diastereomers. In contrast, the de of the pillar[5]arene was low in solution (ca. 10% de) because of a small energy difference between diastereomers. Subsequent end-capping reactions of the polycrystalline [3]pseudorotaxane with high de in solvent-free conditions successfully yielded rotaxanes while maintaining the high de generated by the co-crystallization.

Recent applications of mechanochemistry in synthetic organic chemistry

The promotion of chemical reactions by an unconventional energy source, mechanical energy (mechanochemistry) has increasing number of applications in organic synthesis. The advantages of mechanochemistry are versatile, from reduction of solvent use, increase of reaction efficiency to better environmental sustainability. This paper gives a short review on the recent developments in the fast growing field of organic mechanochemistry which are illustrated by selected examples.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2019-2020

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2020. Also included are papers that describe methods appropriate to analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. The review is basically divided into three sections: (1) general aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, fragmentation, quantification and the use of arrays. (2) Applications to various structural types such as oligo- and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals, and (3) other areas such as medicine, industrial processes and glycan synthesis where MALDI is extensively used. Much of the material relating to applications is presented in tabular form. The reported work shows increasing use of incorporation of new techniques such as ion mobility and the enormous impact that MALDI imaging is having. MALDI, although invented nearly 40 years ago is still an ideal technique for carbohydrate analysis and advancements in the technique and range of applications show little sign of diminishing.

Mechanochemical Enhancement of the Structural Stability of Pseudorotaxane Intermediates in the Synthesis of Rotaxanes

Mechanochemical syntheses of rotaxanes have attracted considerable attention of late because of the superior reaction rates and higher yields associated with their production compared with analogous reactions carried out in solution. Previous investigators, however, have focused on the demonstration of the mechanochemical syntheses of rotaxanes per se, rather than on studying the solid-phase host-guest molecular interplay related to their rapid formation and high yields. In this investigation, we attribute the lower yields of rotaxanes prepared in solution to the limited concentration and a desolvation energy penalty that must be compensated for by host-guest interactions during complexation that precedes the templation leading to rotaxane formation. It follows that, if the desolvation energy can be removed and higher concentrations can be attained, even weak host-guest interactions can drive the complexation of host and guest molecules efficiently. In order to test this hypothesis, we chose two host-guest pairs of permethylated pillar[5]arene/1,6-diaminohexane and permethylated pillar[5]arene/2,2'-(ethylenedioxy)bis(ethylamine) for the simple reason that they exhibit extremely low binding constants (2.7 ± 0.4 M^-1 when 1,6-diaminohexane is the guest and <0.1 M^-1 when 2,2'-(ethylenedioxy)bis(ethylamine) is the guest in CDCl₃; i.e., ostensibly no pseudorotaxane formation is observed). We argue that the amount of pseudorotaxanes formed in the solid state is responsive to mechanical treatments or otherwise and changes in temperature during stoppering reactions. Compared to the amount of pseudorotaxanes that can be obtained in solution, large quantities of pseudorotaxanes are formed in the solid state because of concentration and desolvation effects. This mechanochemical enhancement of pseudorotaxane formation is referred to as a self-correction in the current investigation. Rotaxanes based on permethylated pillar[5]arene/1,6-diaminohexane and permethylated pillar[5]arene/2,2'-(ethylenedioxy)bis(ethylamine) have been synthesized in much higher yields compared to those obtained in solution, aided and abetted by self-correction effects during mechanical treatments and heating at a mild temperature of 50 °C.

Noncovalently bound and mechanically interlocked systems using pillar[n]arenes

Pillar[n]arenes are pillar-shaped macrocyclic compounds owing to the methylene bridges linking the para-positions of the units. Owing to their unique pillar-shaped structures, these compounds exhibit various excellent properties compared with other cyclic host molecules, such as versatile functionality using various organic synthesis techniques, substituent-dependent solubility, cavity-size-dependent host-guest properties in organic media, and unit rotation along with planar chiral inversion. These advantages have enabled the high-yield synthesis and rational design of pillar[n]arene-based mechanically interlocked molecules (MIMs). In particular, new types of pillar[n]arene-based MIMs that can dynamically convert between interlocked and unlocked states through unit rotation have been produced. The highly symmetrical pillar-shaped structures of pillar[n]arenes result in simple NMR spectra, which are useful for studying the motion of pillar[n]arene wheels in MIMs and creating sophisticated MIMs with higher-order structures. The creation and application of polymeric MIMs based on pillar[n]arenes is also discussed.

Selective Monofunctionalization Enabled by Reaction-History-Dependent Communication in Catalytic Rotaxanes

Selective monofunctionalization of substrates with distant, yet equally reactive functional groups is difficult to achieve, as it requires the second functional group to selectively modulate its reactivity once the first functional group has reacted. We now show that mechanically interlocked catalytic rings can effectively regulate the reactivity of stoppering groups in rotaxanes over a distance of about 2 nm. Our mechanism of communication is enabled by a unique interlocked design, which effectively removes the catalytic rings from the substrates by fast dethreading as soon as the first reaction has taken place. Our method not only led to a rare example of selective monofunctionalization, but also to a "molecular if function". Overall, the study presents a way to get distant functional groups to communicate with each other in a reaction-history-dependent manner by creating linkers that can ultimately perform logical operations at the molecular level.

Aliphatic polyketones as classic yet new molecular ropes for structural diversity in organic synthesis

Polyketone compounds play an important role in organic chemistry as a prominent source of reactivity and functionality. Their chemical properties vary widely depending on the ketone sequence in carbon chains. Although vicinal and β-polyketones have been used for more than 150 years, the recent development of new ketone sequences composed of alternating 1,3- and 1,4-diketones has demonstrated the further potential of polyketones as structurally flexible molecular ropes capable of derivatization to π-conjugated chromophores and molecular assemblies. In this Feature Article, we review the synthetic strategies and reactivities of polyketones with respect to their ketone sequence. Furthermore, recent research on polyketones with hybrid ketone sequences is also discussed, focussing on their structural diversity in chemical transformations including intramolecular cyclization and stereoselective oxidation.

Diversity Oriented Preparation of Pillar[5]arene-Containing [2]Rotaxanes by a Stopper Exchange Strategy

Rotaxane building blocks bearing 3,5-bis(trifluoromethyl) benzenesulfonate (BTBS) stoppers have been efficiently prepared from a pillar[5]arene derivative, 3,5-bis(trifluoromethyl) benzenesulfonyl chloride (BTBSCl) and different diols, namely 1,10-decanediol and 1,12-dodecanediol. The BTBS moieties of these compounds are good leaving groups and stopper exchange reactions could be achieved by treatment with different nucleophiles thus affording rotaxanes with ester, thioether or ether stoppers.

Mechanochemistry of supramolecules

The urge to use alternative energy sources has gained significant attention in the eye of chemists in recent years. Solution-based traditional syntheses are extremely useful, although they are often associated with certain disadvantages like generation of waste as by-products, use of large quantities of solvents which causes environmental hazard, etc. Contrastingly, achieving syntheses through mechanochemical methods are generally time-saving, environmentally friendly and more economical. This review is written to shed some light on supramolecular chemistry and the synthesis of various supramolecules through mechanochemistry.

Recent advances in the development of rotaxanes and pseudorotaxanes based on pillar[n]arenes: from construction to application

This article summarizes recent advances in the development of rotaxanes and pseudorotaxanes based on pillar[n]arenes: from construction to application.

Association of liquid-assisted grinding with aging accelerates the inherently slow slipping-on of a dibenzo-24-crown-8 over the N-hydroxysuccinimide ester of an ammonium-containing thread

Very efficient slipping-on of the dibenzo-24-crown-8 over the NHS end of an ammonium-containing molecular axle was carried out through a solvent-less procedure.