GNP-CeO2- polyaniline hybrid hydrogel for electrochemical detection of peroxynitrite anion and its integration in a microfluidic platform

Peroxynitrite anion (ONOO^-) is an important in vivo oxidative stress biomarker whose aberrant levels have pathophysiological implications. In this study, an electrochemical sensor for ONOO^- detection was developed based on graphene nanoplatelets-cerium oxide nanocomposite (GNP-CeO₂) incorporated polyaniline (PANI) conducting hydrogels. The nanocomposite-hydrogel platform exhibited distinct synergistic advantages in terms of large electroactive surface coverage and providing a conductive pathway for electron transfer. Besides, the 3D porous structure of hydrogel integrated the GNP-CeO₂ nanocomposite to provide hybrid materials for the evolution of catalytic activity towards electrochemical oxidation of ONOO^-. Various microscopic and spectroscopic characterization techniques endorsed the successful formation of GNP-CeO₂-PANI hydrogel. Cyclic voltammetry (CV) measurements of GNP-CeO₂-PANI hydrogel modified screen-printed electrodes (SPE) were carried out to record the current changes influenced by ONOO^-. The prepared sensor demonstrated a significant dose-dependent increase in CV peak current within a linear range of 5-100 µM (at a potential of 1.12 V), and a detection limit of 0.14 with a sensitivity of 29.35 ± 1.4 μA μM^-1. Further, a customized microfluidic flow system was integrated with the GNP-CeO₂-PANI hydrogel modified SPE to enable continuous electrochemical detection of ONOO^- at low sample volumes. The developed microfluidic electrochemical device demonstrated an excellent sensitivity towards ONOO^- under optimal experimental conditions. Overall, the fabricated microfluidic device with hybrid hydrogels as electrochemical interfaces provides a reliable assessment of ONOO^- levels. This work offers considerable potential for understanding the oxidative stress-related disease mechanisms through determination of ONOO^- in biological samples.

The Scavenging Effect of Myoglobin from Meat Extracts toward Peroxynitrite Studied with a Flow Injection System Based on Electrochemical Reduction over a Screen-Printed Carbon Electrode Modified with Cobalt Phthalocyanine: Quantification and Kinetics

The scavenging activity of myoglobin toward peroxynitrite (PON) was studied in meat extracts, using a new developed electrochemical method (based on cobalt phthalocyanine-modified screen-printed carbon electrode, SPCE/CoPc) and calculating kinetic parameters of PON decay (such as half-time and apparent rate constants). As reactive oxygen/nitrogen species (ROS/RNS) affect the food quality, the consumers can be negatively influenced. The discoloration, rancidity, and flavor of meat are altered in the presence of these species, such as PON. Our new highly thermically stable, cost-effective, rapid, and simple electrocatalytical method was combined with a flow injection analysis system to achieve high sensitivity (10.843 nA µM⁻¹) at a nanomolar level LoD (400 nM), within a linear range of 3–180 µM. The proposed biosensor was fully characterized using SEM, FTIR, Raman spectroscopy, Cyclic Voltammetry (CV), Differential Pulse Voltammetry (DPV), and Linear Sweep Voltammetry (LSV). These achievements were obtained due to the CoPc-mediated reduction of PON at very low potentials (around 0.1 V vs. Ag/AgCl pseudoreference). We also proposed a redox mechanism involving two electrons in the reduction of peroxynitrite to nitrite and studied some important interfering species (nitrite, nitrate, hydrogen peroxide, dopamine, ascorbic acid), which showed that our method is highly selective. These features make our work relevant, as it could be further applied to study the kinetics of important oxidative processes in vivo or in vitro, as PON is usually present in the nanomolar or micromolar range in physiological conditions, and our method is sensitive enough to be applied.

A novel electrochemical sensor based on microporous polymeric nanospheres for measuring peroxynitrite anion released by living cells and studying the synergistic effect of antioxidants

Peroxynitrite anion (ONOO-) is a crucial reactive nitrogen species (RNS), which has aroused immense research interest in the biological and biomedical fields because aberrant expression levels of ONOO- are related to many diseases. In this work, a novel electrochemical sensor is described for the detection of peroxynitrite anion (ONOO-) released from living cells. It is constructed with a glassy carbon electrode (GCE) decorated with a nanocomposite (CTS-MPNS) synthesized from chitosan (CTS) functionalized microporous polymeric nanospheres (MPNS). The prepared CTS-MPNS/GCE sensor shows a supernormal manifestation in measuring ONOO- in a wide range of concentrations from 3.83 nM to 0.104 mM, and the detection limit is as low as 1.28 nM (S/N = 3), which makes it possible to detect trace amounts of ONOO- released from U87 cells. Significantly, the synergistic effect of different antioxidants on scavenging ONOO- in biological systems is further studied by an electrochemical method for the first time, which provides an efficient strategy for protecting cells against oxidative stress. The developed platform and the efficient strategy may pave the way for their future applications in the field of biomedicine and the treatment of cancer diseases.

Peroxynitrite Sensor Based on a Screen Printed Carbon Electrode Modified with a Poly(2,6-dihydroxynaphthalene) Film

For the first time the electropolymerization of 2,6-dihydroxynaphthalene (2,6-DHN) on a screen printed carbon electrode (SPCE) was investigated and evaluated for peroxynitrite (PON) detection. Cyclic voltammetry was used to electrodeposit the poly(2,6-DHN) on the carbon electrode surface. The surface morphology and structure of poly(2,6-DHN) film were investigated by SEM and FTIR analysis, and the electrochemical features by cyclic voltammetry. The poly(2,6-DHN)/SPCE sensor showed excellent electrocatalytic activity for PON oxidation in alkaline solutions at very low potentials (0-100 mV vs. Ag/AgCl pseudoreference). An amperometric FIA (flow injection analysis) system based on the developed sensor was optimized for PON measurements and a linear concentration range from 2 to 300 μM PON, with a LOD of 0.2 μM, was achieved. The optimized sensor inserted in the FIA system exhibited good sensitivity (4.12 nA·μM^-1), selectivity, stability and intra-/inter-electrode reproducibility for PON determination.

Electrochemical detection of peroxynitrite using hemin-PEDOT functionalized boron-doped diamond microelectrode

Peroxynitrite is a potent nitroxidation agent and highly reactive metabolite, clinically correlated with a rich pathophysiology. Its sensitive and selective detection is challenging due to its high reactivity and short sub-second lifetime. Boron-doped diamond (BDD) microelectrodes have attracted interest because of their outstanding electroanalytical properties that include a wide working potential window and enhanced signal-to-noise ratio. Herein, we report on the modification of a BDD microelectrode with an electro-polymerized film of hemin and polyethylenedioxythiophene (PEDOT) for the purpose of selectively quantifying peroxynitrite. The nanostructured modified polymer layer was characterized by Raman spectroscopy and scanning electron microscopy (SEM). The electrochemical response to peroxynitrite was studied by voltammetry and time-based amperometry. The measured detection limit was 10 ± 0.5 nM (S/N = 3), the sensitivity was 4.5 ± 0.5 nA nM(-1) and the response time was 3.5 ± 1 s. The hemin-PEDOT BDD sensors exhibited a response variability of 5% or less (RSD). The stability of the sensors after a 20-day storage in 0.1 M PB (pH 7.4) at 4 °C was excellent as at least 93% of the initial response to 50 nM PON was maintained. The presence of PEDOT was correlated with a sensitivity increase.

Cobalt phthalocyanine tetracarboxylic acid modified reduced graphene oxide: a sensitive matrix for the electrocatalytic detection of peroxynitrite and hydrogen peroxide

The electrocatalytic properties of cobalt phthalocyanine modified reduced graphene oxide for peroxynitrite and hydrogen peroxide are investigated.

Peroxynitrite activity of hemin-functionalized reduced graphene oxide

Conducting interfaces modified with reduced graphene oxide (rGO) have shown improved electrochemical response for different analytes. The efficient formation of functionalized rGO based materials is thus of current interest for the development of sensitive and selective biosensors. Herein, we report a simple and environmentally friendly method for the formation of a hemin-functionalized rGO hybrid nanomaterial that exhibits remarkable sensitivity to peroxynitrite (ONOO(-)) in solution. The hemin-functionalized rGO hybrid nanomaterial was formed by mixing an aqueous solution of graphene oxide (GO) with hemin and sonicating the suspension for 5 h at room temperature. In addition to playing a key role in biochemical and electrocatalytic reactions, hemin has been proven to be a good reducing agent for GO. The sensitivity of the peroxynitrite sensor is ≈7.5 ± 1.5 nA mM(-1) with a detection limit of 5 ± 1.5 nM.

Reactive nitrogen species reactivities with nitrones: theoretical and experimental studies

Reactive nitrogen species (RNS) such as nitrogen dioxide ((•)NO(2)), peroxynitrite (ONOO(-)), and nitrosoperoxycarbonate (ONOOCO(2)(-)) are among the most damaging species present in biological systems due to their ability to cause modification of key biomolecular systems through oxidation, nitrosylation, and nitration. Nitrone spin traps are known to react with free radicals and nonradicals via electrophilic and nucleophilic addition reactions and have been employed as reagents to detect radicals using electron paramagnetic resonance (EPR) spectroscopy and as pharmacological agents against oxidative stress-mediated injury. This study examines the reactivity of cyclic nitrones such as 5,5-dimethylpyrroline N-oxide (DMPO) with (•)NO(2), ONOO(-), ONOOCO(2)(-), SNAP, and SIN-1 using EPR. The thermochemistries of nitrone reactivity with RNS and isotropic hfsc's of the addition products were also calculated at the PCM(water)/B3LYP/6-31+G**//B3LYP/6-31G* level of theory with and without explicit water molecules to rationalize the nature of the observed EPR spectra. Spin trapping of other RNS such as azide ((•)N(3)), nitrogen trioxide ((•)NO(3)), amino ((•)NH(2)) radicals and nitroxyl (HNO) were also theoretically and experimentally investigated by EPR spin trapping and mass spectrometry. This study also shows that other spin traps such as 5-carbamoyl-5-methyl-pyrroline N-oxide, 5-ethoxycarbonyl-5-methyl-pyrroline N-oxide, and 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline N-oxide can react with radical and nonradical RNS, thus making spin traps suitable probes as well as antioxidants against RNS-mediated oxidative damage.

Metallophthalocyanines and metalloporphyrins as electrocatalysts: a case of hydrogen peroxide and glucose detection

This review summarizes the applications of metallophthalocyanine (MPc) and metallo-porphyrin (MP) complexes as electrocatalysts immobilized onto various electrodes for the detection of hydrogen peroxide and glucose. The uses of MPc and MP complexes as electron mediators for the detection of glucose at glucose oxidase modified surfaces are discussed.

Applications of polymerized metal tetra-amino phthalocyanines towards hydrogen peroxide detection

This work reports the use of metallo tetra-amino phthalocyanines ( MTAPc, M = Co and Mn ) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide ( H2O2 ). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.

On-chip multi-electrochemical sensor array platform for simultaneous screening of nitric oxide and peroxynitrite

In this work we report on the design, microfabrication and analytical performances of a new electrochemical sensor array (ESA) which allows for the first time the simultaneous amperometric detection of nitric oxide (NO) and peroxynitrite (ONOO(-)), two biologically relevant molecules. The on-chip device includes individually addressable sets of gold ultramicroelectrodes (UMEs) of 50 µm diameter, Ag/AgCl reference electrode and gold counter electrode. The electrodes are separated into two groups; each has one reference electrode, one counter electrode and 110 UMEs specifically tailored to detect a specific analyte. The ESA is incorporated on a custom interface with a cell culture well and spring contact pins that can be easily interconnected to an external multichannel potentiostat. Each UME of the network dedicated to the detection of NO is electrochemically modified by electrodepositing thin layers of poly(eugenol) and poly(phenol). The detection of NO is performed amperometrically at 0.8 V vs. Ag/AgCl in phosphate buffer solution (PBS, pH = 7.4) and other buffers adapted to biological cell culture, using a NO-donor. The network of UMEs dedicated to the detection of ONOO(-) is used without further chemical modification of the surface and the uncoated gold electrodes operate at -0.1 V vs. Ag/AgCl to detect the reduction of ONOOH in PBS. The selectivity issue of both sensors against major biologically relevant interfering analytes is examined. Simultaneous detection of NO and ONOO(-) in PBS is also achieved.