Poly(para toluene sulphonic acid) and gold nanoparticles modified glassy carbon electrode for simultaneous voltammetric sensing of xanthine and hypoxanthine

A voltammetric sensor has been developed for the individual as well as simultaneous determination of xanthine (XA) and hypoxanthine (HX) based on an electroactive-polymerised layer of para toluene sulphonic acid and gold nanoparticles composite modified glassy carbon electrode ([p(PTSA)]/AuNPs/GCE)]. Under optimized conditions, an enhancement in the oxidation currents with well-separated and well-resolved peak position and a lower shift in the peak potentials were observed. By square wave voltammetry, the simultaneous determinations of XA and HX were achieved in the linear ranges 6.00 × 10-4 M to 3.00 × 10-6 M and 5.00 × 10-4 M to 1.00 × 10-5 M with detection limits of 4.09 × 10-7 M and 4.10 × 10-7 M, respectively. The mechanistic aspects were unveiled from linear sweep voltammetric studies and found that the electrode processes were diffusion-controlled. Finally, the sensor was successfully employed for the simultaneous determination of spiked amount of XA and HX in synthetic urine and serum samples.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Voltammetric picomolar determination of mercury, copper and cadmium using modified pencil graphite electrode with poly-L-cysteine and Fe3O4 nanoparticles

Cost-effective simultaneous determination of mercury, copper and cadmium ions was performed by differential pulse anodic stripping voltammetry (DPASV) using a pencil graphite electrode (PGE) modified with poly-L-cysteine (P-L-Cys) and Fe₃O₄ nanoparticles. Electropolymerization of L-cysteine was performed by cyclic voltammetry (CV) through applying different cycles. Also, Fe₃O₄ was deposited in a single step by applying a constant potential on the electrode surface in the presence of ferric nitrate. To enhance the sensitivity of measurement, several parameters such as monomer concentration, scan rate, number of cycles in electropolymerization, ferric nitrate concentration, Fe₃O₄ electrodeposition potential and time, and pH of the sample solution were optimized. The surface morphology of the modified electrode was examined by SEM and FTIR. Electrochemical impedance spectroscopy was conducted to investigate the impedance of the electrode surface. The linear ranges for cadmium, copper and mercury were 0.001‒2500, 0.0002‒3600 and 0.0001‒2500 nM with detection limits of 6.4 × 10^-13, 1.0 × 10^-13 and 9.0 × 10^-14 M, respectively. The stability and reproducibility of the electrode were investigated. Finally, the modified electrode was applied to determine mercury, copper and cadmium in real samples such as the groundwater, Caspian Sea and Tajan River water.

Decoration of titanium dioxide nanotubes with silver nanoparticles using the photochemical deposition method and their application as an electrocatalyst to determine tinidazole

In this study, titanium nanotube electrodes were decorated with silver nanoparticles (AgNPs/TiO₂NTs) and used as an electrocatalyst for the reduction of tinidazole. AgNPs/TiO₂NTs are constructed by anodization of titanium sheet metal and photochemical deposition of AgNPs on TiO₂NTs. The structural and elemental analysis characteristics of the AgNPs/TiO₂NT electrode have been studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) methods. Based on the cyclic voltammetric data, it has been confirmed that the AgNPs/TiO₂NT electrode has good electrocatalytic activity to reduce tinidazole. Two liner concentration ranges of 0.2-55.0 μM and 55.0-111.2 μM were obtained by amperometric method. A detection limit of 60.9 nM was obtained for measuring tinidazole at the AgNPs/TiO₂NT electrode surface. In addition, the designed sensor has been successfully used for quantitative measurement of tinidazole in pharmaceutical and human urine samples.

A cucurbit[7]uril-based supramolecular fluorescent probe for the detection of metronidazole with high sensitivity and strong anti-interference capacity

We propose a new method for the selective detection of the antibiotic metronidazole (MNZ) using CB[7]-JAT (cucurbit[7]uril = CB[7] and JAT = jatrorrhizine) as a fluorescent probe, which is based on the competitive reaction between MNZ and JAT for the occupancy of the CB[7] cavity. The proposed method gives a good calibration curve in the concentration range of 0.38–60 μM, and the limit of detection for MNZ is 65 ng mL−1 with those obtained by the standard curve method. Moreover, the proposed method was successfully applied for the determination of MNZ in liquid milk. Most importantly, due to the high binding affinity between CB[7] and MNZ, the proposed method shows great anti-interference capacity to accurately detect MNZ in the presence of other antibiotics.

A sensitive electrochemical detection of metronidazole in synthetic serum and urine samples using low-cost screen-printed electrodes modified with reduced graphene oxide and C60

Monitoring the concentration of antibiotics in body fluids is essential to optimizing the therapy and minimizing the risk of bacteria resistance, which can be made with electrochemical sensors tailored with appropriate materials. In this paper, we report on sensors made with screen-printed electrodes (SPE) coated with fullerene (C60), reduced graphene oxide (rGO) and Nafion (NF) (C60-rGO-NF/SPE) to determine the antibiotic metronidazole (MTZ). Under optimized conditions, the C60-rGO-NF/SPE sensor exhibited a linear response in square wave voltammetry for MTZ concentrations from 2.5 × 10-7 to 34 × 10-6 mol/L, with a detection limit of 2.1 × 10-7 mol/L. This sensor was also capable of detecting MTZ in serum and urine, with recovery between 94% and 100%, which are similar to those of the standard chromatographic method (HPLC-UV). Because the C60-rGO-NF/SPE sensor is amenable to mass production and allows for MTZ determination with simple principles of detection, it fulfills the requirements of therapeutic drug monitoring programs.

Electrochemical determination of chloramphenicol and metronidazole by using a glassy carbon electrode modified with iron, nitrogen co-doped nanoporous carbon derived from a metal-organic framework (type Fe/ZIF-8)

In this study, an iron-doped metal-organic framework (MOF) Fe/ZIF-8 was synthesized from ZIF-8 at room temperature. Direct carbonization of Fe/ZIF-8 under a nitrogen atmosphere produced nanoporous nitrogen doped carbon nanoparticles decorated with Fe component (Fe/NC). The Fe/NC exhibited a large surface area (1221.185 m² g^-1) and narrow pore-size distribution (3-5 nm). The nanoporous Fe/NC components along with Nafion were used to modify a glassy carbon electrode for the electrochemical determination of chloramphenicol and metronidazole via linear sweep voltammetry. Under optimal conditions, the reduction peak currents (observed at -0.237 V and -0.071 V vs. Ag/AgCl) of these analytes increased linearly with increasing chloramphenicol and metronidazole concentrations in the range of 0.1-100 μM and 0.5-30 μM, with the detection limits estimated to be 31 nM and 165 nM, respectively. This result was attributed to the large surface area, porous structure, high nitrogen content, and as well as the electrocatalytic effect of Fe atoms embeded in the carbon support. The proposed sensor was used for chloramphenicol and metronidazole analysis in samples, providing satisfactory results.

Layered double hydroxide nanoparticles embedded in a biopolymer: a novel platform for electroanalytical determination of diazepam

A Co–Al layered double hydroxide/poly(tyrosine) modified glassy carbon electrode was prepared and used for electrocatalytic determination of diazepam in real samples.

Synthesis and Application of Aurophilic Poly(Cysteine) and Poly(Cysteine)-Containing Copolymers

The redox capacity, as well as the aurophilicity of the terminal thiol side groups, in poly(Cysteine) lend a unique characteristic to this poly(amino acid) or polypeptide. There are two major application fields for this polymer: (i) biomedical applications in drug delivery and surface modification of biomedical devices and (ii) as coating for electrodes to enhance their electrochemical sensitivity. The intended application determines the synthetic route for p(Cysteine). Polymers to be used in biomedical applications are typically polymerized from the cysteine N-carboxyanhydride by a ring-opening polymerization, where the thiol group needs to be protected during the polymerization. Advances in this methodology have led to conditions under which the polymerization progresses as living polymerization, which allows for a strict control of the molecular architecture, molecular weight and polydispersity and the formation of block copolymers, which eventually could display polyphilic properties. Poly(Cysteine) used as electrode coating is typically polymerized onto the electrode by cyclic voltammetry, which actually produces a continuous, pinhole-free film on the electrode via the formation of covalent bonds between the amino group of Cysteine and the carbon of the electrode. This resulting coating is chemically very different from the well-defined poly(Cysteine) obtained by ring-opening polymerizations. Based on the structure of cysteine a significant degree of cross-linking within the coating deposited by cyclic voltammetry can be assumed. This manuscript provides a detailed discussion of the ring-opening polymerization of cysteine, a brief consideration of the role of glutathione, a key cysteine-containing tripeptide, and examples for the utilization of poly(Cysteine) and poly(Cysteine)-containing copolymers, in both, the biomedical as well as electrochemical realm.

An innovative immunosensor for detection of tumor suppressor protein p53 in unprocessed human plasma and cancer cell lysates

An innovative mediator-free electrochemical immunosensor for quantitation of p53 tumor suppressor protein based on signal amplification strategy was fabricated. In this work, biotin conjugated p53-antibody (anti-p53) was immobilized onto a green and biocompatible nanocomposite containing poly l-cysteine (P-Cys) as conductive matrix and 3D gold nanoparticles (GNPs) as signal amplification element. Therefore, a novel nanocomposite film based on P-Cys and GNPs was exploited to develop a highly sensitive immunosensor for detection of p53 protein. Importantly, GNPs prepared by sonoelectrodeposition method which lead to compact morphology. Fully electrochemical methodology was used to prepare a new transducer on a gold surface which provided a high surface area to immobilize a high amount of the anti-p53. The surface morphology of electrode was characterized by high-resolution field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDX). The immunosensor was employed for the detection of p53 in physiological pH using square wav voltammetry and differential pulse voltammetry (DPVs) techniques. Under optimized condition the calibration curve for p53 concentration by SWV and DPV was linear in 0.0369-50pM and 0.018-2.5pM with lower limit of quantification of 48fM and 18fM, respectively. The method was successfully applied assay of the p53 in unprocessed human plasma samples. Also, the method was applied to the assay of p53 in human plasma sample and normal and malignant cell line lysates such as (L929 normal cell Line from mouse C3H (L929), colon cancer cell-HCT, prostate cancer cell line PC-3, and human breast adenocarcinoma cell line-MCF7).

Highly sensitive amperometric biosensor for determination of NADH and ethanol based on Au-Ag nanoparticles/poly(L-Cysteine)/reduced graphene oxide nanocomposite

This work presents the fabrication of a novel nicotinamide adenine dinucleotide (NADH) sensor using gold-silver bimetallic nanoparticles (Au-AgNPs), poly(L-Cysteine) (P(L-Cys)) and electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode (GCE/Au-AgNPs/P(L-Cys)-ERGO). The composite electrode exhibited an excellent electrocatalytic response towards NADH at a low oxidation potential (+ 0.35V) and minimization of surface contamination due to the synergistic effects of the Au-AgNPs, polymer and ERGO. Under optimum conditions, modified sensors allowed the detection of NADH with a wide linear range from 0.083µM to 1.05mM with a low detection limit of 9.0nM (S/N = 3). Moreover, this modified electrode was also used as a sensitive ethanol biosensor, which was prepared with alcohol dehydrogenase (ADH) via glutaraldehyde, bovin serum albumin and nafion (Naf). There was a linear response for ethanol in the concentration range from 0.017 to 1.845mM with a low detection limit of 5.0µM (S/N = 3). The GCE/Au-AgNPs/P(L-Cys)-ERGO/ADH/Naf electrode can be successfully used for the determination of ethanol in different commercial beverages.

Highly sensitive immunosensing of prostate specific antigen using poly cysteine caped by graphene quantum dots and gold nanoparticle: A novel signal amplification strategy

A mediator-free electrochemical immunosensor for quantitation of prostate specific antigen (PSA) based on dual signal amplification strategy was fabricated. In this work, PSA-antibody (anti-PSA) was immobilized onto a green and biocompatible nanocomposite containing poly l-cysteine (P-Cys) as conductive matrix and graphene quantum dots (GQDs)/gold nanoparticles (GNPs) as dual signal amplification elements. Therefore, a novel multilayer film based on P-Cys, GQDs, and GNPs was exploited to develop a highly sensitive amperometric immunosensor for detection of PSA. Fully electrochemical methodology was used to prepare a new transducer on a gold surface which provided a high surface area to immobilize a high amount of the anti-PSA. Importantly, GNPs prepared by soft template synthesized method lead to compact morphology was achieved. The surface morphology of electrode surface was characterized by high-resolution field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDX). Chemical compositions of the gold nanoparticles were analysed by an EDX. The immunosensor was employed for the detection of PSA in physiological pH. Under optimized condition the calibration curve for PSA concentration was linear up to 2-9pgmL^-1 with lower limit of quantification of 1.8pgmL^-1.

A highly sensitive metronidazole sensor based on a Pt nanospheres/polyfurfural film modified electrode

A sensitively electrochemical metronidazole sensor basing on a Pt nanospheres/polyfurfural modified glassy carbon electrode.

Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles

This review summarizes recent progress in surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles.

Metal nanoparticles and supramolecular macrocycles: a tale of synergy

In this minireview, we summarize current research dealing with the combination of noble-metal nanoparticles and different families of supramolecular macrocycles (cyclodextrins, cucurbit[n]urils, calixarenes, and pillar[n]arenes). We intended to select relevant publications on the synthesis of noble-metal nanoparticles with macrocycles acting as capping agents or/and reducing agents, as well as on the post-synthetic metal-nanoparticle modification with macrocycles. We also discuss strategies in which supramolecular chemistry is applied to direct the self-assembly of nanoparticles and formation of polymer composites. We finally describe the main applications of these materials in various fields.