Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Novel ammonia-sensitive sodium alginate-based films containing Co-Imd microcrystals for smart packaging application

Currently, there is an urgent requirement for the fabrication of smart packaging materials that can be applied for the real-time visual monitoring of food freshness. In this research, cubic Co-MOF (Co-Imd) microcrystal with ammonia-sensitivity and antibacterial activity was manufactured and then anchored within sodium alginate (NaAlg) matrix to construct smart packaging materials. The structure, physical and functional performances of NaAlg-based films with different content of Co-Imd (0.5, 1.0 and 2.0 wt% on NaAlg basis) were then evaluated in detail. Results reveal that the incorporated Co-Imd fillers are equally anchored within the NaAlg matrix due to the generation of new hydrogen-bonding interaction, which make an obvious improvement in mechanical strength, toughness, oxygen/water barrier, and UV-blocking ability of the NaAlg film. Moreover, the constructed NaAlg/Co-Imd blend films show superior antibacterial capability, ammonia-sensitivity function as well as color stability. Ultimately, the NaAlg/Co-Imd blend films were successfully utilized for indicating the deterioration of shrimp based on noticeable color alteration, suggesting their tremendous prospects for utilization in smart active packaging. This work offers a facile and efficient method for fabricating novel ammonia-sensitive and long-term color-stable NaAlg-based film materials with improved mechanical strength, toughness, oxygen/water barrier, UV-blocking, and antibacterial performances for smart active packaging application.

A sonochemical synthesis of SrTiO3 supported N-doped graphene oxide as a highly efficient electrocatalyst for electrochemical reduction of a chemotherapeutic drug

A sonochemical based green synthesis method playa powerful role in nanomaterials and composite development. In this work, we developed a perovskite type of strontium titanate via sonochemical process. SrTiO₃ particles were incorporated with nitrogen doped graphene oxide through simple ultrasonic irradiation method. The SrTiO₃/NGO was characterized by various analytical methods. The nanocomposite of SrTiO₃/NGO was modified with laser-induced graphene electrode (LIGE). The SrTiO₃/NGO/LIGE was applied for electrochemical sensor towards chemotherapeutic drug detection (nilutamide). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques have been used to examine the electrochemical performance of nilutamide (anti-cancer drug). DPV was found to be more sensitive and found to exhibit a sensitivity 8.627 µA µM^-1 cm^-2 for SrTiO₃/NGO/LIGE with a wide linear range (0.02-892 µM) and low Limit of detection (LOD: 1.16 µM). SrTiO₃/NGO/LIGE has been examined for the detection of nilutamide in blood serum and urine samples and obtained a good recovery in the range of 97.2-99.72 %. The enhanced stability and selectivity and practical application results indicates the suitability of SrTiO₃/NGO/LIGE towards the detection of nilutamide drug in pharmaceutical industries.

Sonochemical construction of hierarchical strontium doped lanthanum trisulfide electrocatalyst: An efficient electrode for highly sensitive detection of ecological pollutant in food and water

Herbicides are used constantly in agriculture to enhance productivity across the globe. This herbicide monitoring requires utmost importance since its high dose leads to ecological imbalance and a negative impact on the environment. Moreover, a quantification of toxic herbicide is one of the important problems in the food analysis. In this work, deals with the development of a simple, and facile one-pot sonochemical synthesis of strontium doped La₂S₃ (Sr@La₂S₃). Morphological and structural characterization confirms the doping of Sr@La₂S₃ to generate a hierarchical layered structure. The electrochemical performance of modified with rotating disk electrode (RDE) using Sr@La₂S₃ composite is high, compared to La₂S₃ and bare electrodes towards the quantitative detection of mesotrione (MTO) in phosphate buffer. Sr@La₂S₃/RDE showed good sensitivity for MTO detection and it exhibit a range of 0.01-307.01 μM and limit of detection of 2.4 nM. Besides, the selectivity of fabricated electrode is high as it can electrochemically reduce MTO particularly, even in the presence of other chemicals, biological molecules and inorganic ions. The repeatability of MTO detection is high even after 30 days with a lower RSD values. Hence, simple fabrication of Sr@La₂S₃/RDE could be a novel electrode for the sensitive, selective, and reproducible determination of herbicides in real-time applications.

Fast and Ultrasensitive Electrochemical Detection for Antiviral Drug Tenofovir Disoproxil Fumarate in Biological Matrices

Tenofovir disoproxil fumarate (TDF) is an antiretroviral medication with significant curative effects, so its quantitative detection is important for human health. At present, there are few studies on the detection of TDF by electrochemical sensors. This work can be a supplement to the electrochemical detection of TDF. Moreover, bare electrodes are susceptible to pollution, and have high overvoltage and low sensitivity, so it is crucial to find a suitable electrode material. In this work, zirconium oxide (ZrO₂) that has a certain selectivity to phosphoric acid groups was synthesized by a hydrothermal method with zirconyl chloride octahydrate as the precursor. A composite modified glassy carbon electrode for zirconium oxide-chitosan-multiwalled carbon nanotubes (ZrO₂-CS-MWCNTs/GCE) was used for the first time to detect the TDF, and achieved rapid, sensitive detection of TDF with a detection limit of sub-micron content. The ZrO₂-CS-MWCNTs composite was created using sonication of a mixture of ZrO₂ and CS-MWCNTs solution. The composite was characterized using scanning electron microscopy (SEM) and cyclic voltammetry (CV). Electrochemical analysis was performed using differential pulse voltammetry (DPV). Compared with single-material electrodes, the ZrO₂-CS-MWCNTs/GCE significantly improves the electrochemical sensing of TDF due to the synergistic effect of the composite. Under optimal conditions, the proposed method has achieved good results in linear range (0.3~30 μM; 30~100 μM) and detection limit (0.0625 μM). Moreover, the sensor has the merits of simple preparation, good reproducibility and good repeatability. The ZrO₂-CS-MWCNTs/GCE has been applied to the determination of TDF in serum and urine, and it may be helpful for potential applications of other substances with similar structures.

GNP-CeO2- polyaniline hybrid hydrogel for electrochemical detection of peroxynitrite anion and its integration in a microfluidic platform

Peroxynitrite anion (ONOO^-) is an important in vivo oxidative stress biomarker whose aberrant levels have pathophysiological implications. In this study, an electrochemical sensor for ONOO^- detection was developed based on graphene nanoplatelets-cerium oxide nanocomposite (GNP-CeO₂) incorporated polyaniline (PANI) conducting hydrogels. The nanocomposite-hydrogel platform exhibited distinct synergistic advantages in terms of large electroactive surface coverage and providing a conductive pathway for electron transfer. Besides, the 3D porous structure of hydrogel integrated the GNP-CeO₂ nanocomposite to provide hybrid materials for the evolution of catalytic activity towards electrochemical oxidation of ONOO^-. Various microscopic and spectroscopic characterization techniques endorsed the successful formation of GNP-CeO₂-PANI hydrogel. Cyclic voltammetry (CV) measurements of GNP-CeO₂-PANI hydrogel modified screen-printed electrodes (SPE) were carried out to record the current changes influenced by ONOO^-. The prepared sensor demonstrated a significant dose-dependent increase in CV peak current within a linear range of 5-100 µM (at a potential of 1.12 V), and a detection limit of 0.14 with a sensitivity of 29.35 ± 1.4 μA μM^-1. Further, a customized microfluidic flow system was integrated with the GNP-CeO₂-PANI hydrogel modified SPE to enable continuous electrochemical detection of ONOO^- at low sample volumes. The developed microfluidic electrochemical device demonstrated an excellent sensitivity towards ONOO^- under optimal experimental conditions. Overall, the fabricated microfluidic device with hybrid hydrogels as electrochemical interfaces provides a reliable assessment of ONOO^- levels. This work offers considerable potential for understanding the oxidative stress-related disease mechanisms through determination of ONOO^- in biological samples.

Facile one pot sonochemical synthesis of layered nanostructure of ZnS NPs/rGO nanosheets for simultaneous analysis of daclatasvir and hydroxychloroquine

In this study, zinc sulfide nanoparticles were loaded on reduced graphene oxide (ZnS NPs/rGO) using simple sonochemical method. The nanocomposite was characterized using different morphological and electrochemical techniques such as TEM, SEM, PXRD, EDX, Raman spectroscopy, FTIR, N₂-adsorption-desorption, CV, and EIS. The ZnS NPs/rGO modified glassy carbon electrode (GCE) was used to simultaneously estimate hydroxychloroquine (HCQ) and daclatasvir (DAC) in a binary mixture for the first time. The modified nanocomposite exhibited good catalytic activity towards HCQ and DAC detection. In addition, it showed higher sensitivity, good selectivity and stability; and high reproducibility towards HCQ and DAC analysis. The activity of the modified electrode was noticeably improved due to synergism between ZnS NPs and rGO. Under optimum conditions of DPV measurements, the anodic peak currents (Ipa) were obviously increased with the increase of HCQ and DAC amounts with linear ranges of 5.0-65.0 and 7.0-65.0 nM with LODs of 0.456 and 0.498 nM for HCQ and DAC, respectively. The ZnS NPs/ rGO modified GCE was used to quantify HCQ and DAC in biological fluids with recoveries of 98.7-102.7% and 96.9-104.5% and RSDs of 1.89-3.57% and 1.91-3.70%, respectively.

Synthesis and characterization of bipyridine cobalt(ii) complex modified graphite screen printed electrode: an electrochemical sensor for simultaneous detection of acetaminophen and naproxen

The new Co(ii) compound [Co(5,5'-dmbpy)2(NCS)2] (a1) was prepared by reacting Co(NO3)2·6H2O, 5,5'-dimethyl-2,2'-bipyridine ligand, and Na(SCN). The nano-scale size of [Co(5,5'-dmbpy)2(NCS)2] (a1) was synthesized using sonochemical process. The size of the nanoparticles (a2) was ∼13 ± 2 nm. We have also provided a new platform of electrochemical sensing for simultaneous detection of acetaminophen and naproxen using (a2) surface modified graphite screen printed electrode (SPE) in 0.1 M phosphate buffer solution (PBS, pH 7.0). In contrast to bare SPE, the modified SPE could significantly improve the electrooxidation activity of acetaminophen along with the rise in the current of an anodic peak. The peak currents acquired using differential pulse voltammetry (DPV) raised linearly with the raising of acetaminophen concentration and the sensor had a detection range over the concentration range of 0.009-325.0 μM, with a detection limit of 5.0 nM (S/N = 3). In the case of naproxen peak, currents of naproxen oxidation at the modified SPE were linearly dependent on the naproxen amounts in the range of 1.0-500.0 μM. The detection limit (S/N = 3) was calculated to be 0.03 μM. The DPV responses show that the peaks of acetaminophen and naproxen oxidation were vividly separated from one other with a potential difference of 410 mV between them. The low detection limit, high sensitivity, and stability made the relevant electrode applicable for the analysis of acetaminophen and naproxen in real samples. Further, its practical applicability was reliable and desirable in the analysis of pharmaceutical compounds and biological fluids. The benefits of using this modified electrode for the determination of analytes are compared with other works in the manuscript.

A disposable electrode modified with metal orthovanadate and sulfur-reduced graphene oxide for electrochemical detection of

CVO@SRG composite was prepared by a hydrothermal method and the voltammetric measurement of an organic compound.

Electrochemical detection of methyl parathion via a novel biosensor tailored on highly biocompatible electrochemically reduced graphene oxide-chitosan-hemoglobin coatings

A quick electrochemical sensing tool by utilizing novel bioelectrode based on redox active protein hemoglobin (Hb) has been offered here for the determination of methylparathion (MP). The bioelectrode has been designed by immobilizing Hb on electrochemically reduced graphene oxide-chitosan (ERGO-CS/Hb/FTO) based biocompatible coatings. Fourier transform-infrared analyses (FTIR), field emission scanning electron microscopy (FESEM), UV-visible and electrochemical characterization reveal the successful grafting of ERGO-CS/Hb/FTO. A detailed impedimetric analysis shows low charge transfer resistance (R_CT) and solution resistance (Rs) for the fabricated biosensor, thus pointing towards improved electrochemical performance and sensitivity. In-depth elucidation of redox analysis has been presented in terms of surface concentration of redox moiety (2.92 × 10^-9 mol cm^-2) and heterogeneous electron transfer rate constant (0.0032 s^-1) which indicate enhanced surface coverage and better charge transfer properties of the proposed electrochemical biosensor. The sensor is equipped with a low limit of detection of 79.77 nM and a high sensitivity of 45.77 Acm^-2 μM^-1 with excellent reproducibility. The modified biosensor also offered its credibility towards detection of MP in vegetable samples with recovery (%) ranging from 94% to 101%. The designed biosensor hereby, evolves as a promising approach for the recognition of MP.

Sonochemical synthesis and fabrication of neodymium sesquioxide entrapped with graphene oxide based hierarchical nanocomposite for highly sensitive electrochemical sensor of anti-cancer (raloxifene) drug

The ultrasound-assisted synthesis of a novel neodymium sesquioxide nanoparticles (Nd₂O₅ NPs) decorated graphene oxide (GO) nanocomposite under ultrasonic probe (Ultrasonic processor model-PR 1000; frequency-30 kHz; power of 100 W/cm²) has been reported. After then, SEM, TEM, XRD, EDX and electrochemical impedance spectroscopy characterized was analyzed using Nd₂O₅ NPs@GO nanomaterial. Furthermore, the nanomaterial modified GCE (glassy carbon electrode) shows excellent electrochemical sensing performance towards anti-cancer drug. Raloxifene is one of the important anti-cancer drug. Moreover, the fabricated electrochemical sensor has showed a wide linear range for raloxifene between 0.03 and 472.5 µM and nanomolar detection limit (18.43 nM). In addition, the Nd₂O₅ NPs@GO modified sensor has been applied to the determination of raloxifene in human blood and urine samples.

Facile sonochemical synthesis of rutile-type titanium dioxide microspheres decorated graphene oxide composite for efficient electrochemical sensor

In this reports the facile and green synthesis of rutile-type titanium dioxide nanoparticles decorated graphene oxide nanocomposite via the ultrasonication process (frequency: 50 kHz, Power: 100 W/cm² and Ultrasonic type: Ti-horn). Because, the sonochemical synthesis method is simple, non-explosive and harmless method than other conventional technique. Furthermore, the synthesized material was characterized by various analytical techniques including FESEM, EDX, XRD, EIS and electrochemical methods. Then, the synthesized TiO₂ MPs@GOS composite was applied for the electrocatalytic detection of theophylline (TPL) using CV and amperometric (current-time) techniques. Captivatingly, the modified sensor has excellent electrocatalytic performance with the wider linear range from 0.02 to 209.6 µM towards the determination of theophylline and the LOD and sensitivity of the modified sensor was calculated as 13.26 nM and 1.183 μA·µM^-1·cm^-2, respectively. In addition, a selectivity, reproducibility and stability of the TiO₂ MPs@GOS modified GCE were analyzed towards the determination of theophylline molecule. Finally, the real time application of TiO₂ MPs@GOS modified theophylline sensor was established in serum and drug samples.

Sonochemical synthesis and fabrication of honeycomb like zirconium dioxide with chitosan modified electrode for sensitive electrochemical determination of anti-tuberculosis (TB) drug

Herein, novel honeycomb like zirconium dioxide with chitosan (ZrO₂@chitosan) nanocomposite have been designed through a facile ultrasound-assisted method and followed by a simple sonication process (bath-type ultrasound washer; Honda Electronics-W-118T; 100 W/cm² and 300 kHz frequency). After then, as-synthesized ZrO₂@chitosan was characterized by FESEM, XRD and EIS. The ZrO₂@chitosan nanocomposite modified glassy carbon electrode shows excellent electrochemical sensing performance towards anti-tuberculosis drug (rifampicin). Furthermore, the ZrO₂@chitosan modified and fabricated electrochemical sensor showed a wide linear range between 0.015 µM and 547.4 µM and nanomolar detection limit (7.5 nM). Moreover, the ZrO₂@chitosan modified electrode showed selectivity towards the detection of anti-tuberculosis drug (rifampicin). The ZrO₂@chitosan nanocomposite film modified non-enzymatic sensor has high stable and good reproducible towards the detection of rifampicin. In addition, the as-synthesized ZrO₂@chitosan nanocomposite modified electrode has been applied to the determination of rifampicin in biological samples such as human serum and urine samples.

A sensitive electrochemical determination of chemotherapy agent using graphitic carbon nitride covered vanadium oxide nanocomposite; sonochemical approach

We have developed a graphitic carbon nitride covered vanadium oxide nanocomposite (V₂O₅@g-C₃N₄) by a simple sonochemical approach (50 kHz and 150 W/cm²). Furthermore, the morphology and chemical composition of the V₂O₅@g-C₃N₄ nanocomposite was carried out by X-rays diffractometry (XRD), transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS). Furthermore, the V₂O₅@g-C₃N₄ nanocomposite modified electrode was investigate electrochemical behavior of the anticancer drug. Compared with bare SPCE, V₂O₅/SPCE and g-C₃N₄/SPCE, V₂O₅@g-C₃N₄ modified SPCE showed highest current response towards anti-cancer drug (methotrexate). Furthermore, the modified sensor exhibits with a sharp peaks and wide linear range (0.025-273.15 μM) by using DPV with the sensitivity of 7.122 μA μM^-1 cm^-2. Notably, we have achieved a nanomolar detection limit (13.26 nM) for the DPV detection of methotrexate. Further, the practicability of the V₂O₅@g-C₃N₄ nanocomposite modified sensor can be used for real time sensing of methotrexate in drug and blood serum samples with good recover ranges. It has potential applications in routine analysis with high specificity, excellent reproducibility and good stability.

Facile sonochemical synthesis of porous and hierarchical manganese(III) oxide tiny nanostructures for super sensitive electrocatalytic detection of antibiotic (chloramphenicol) in fresh milk

We report the preparation of a porous and hierarchical manganese(III) oxide tiny nanostructures (Mn₂O₃ TNS) by a simple sonochemical approach. The nanocatalyst was synthesized by a bath-type ultrasound washer (Honda Electronics, W-118T) at 700 W and 300 kHz frequency. The morphology and chemical composition of the nanocatalyst were characterized by X-rays diffractometry (XRD), transmission electron microscopy (TEM), energy dispersive x-rays (EDX), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrocatalytic activity (ECA) was monitored by detection of toxic antibiotic drug (chloramphenicol) under phosphate buffer (pH 7.0). A facile sonochemical route was employed to prepare Mn₂O₃ TNS modified electrode. The screen-printed carbon electrode (SPCE) modified with Mn₂O₃ TNS was fabricated and applied for the electrochemical determination of chloramphenicol. Compared with bare SPCE, Mn₂O₃ TNS modified SPCE showed highest current response towards chloramphenicol. Furthermore, the modified sensor exhibits with a sharp peak and two linear ranges by using DPV (i) 0.015-1.28 μM with the sensitivity of 4.167 μA μM^-1 cm^-2 and (ii) 1.35-566.3 μM with the sensitivity of 7.205 μA μM^-1 cm^-2. Notably, we achieved a very low-level detection limit of 4.26 nM for the DPV detection of chloramphenicol. Further, the superior practicability of the nanosheets modified sensor can be used for real time sensing of chloramphenicol with good recover ranges.

Developing green sonochemical approaches towards the synthesis of highly integrated and interconnected carbon nanofiber decorated with Sm2O3 nanoparticles and their use in the electrochemical detection of toxic 4-nitrophenol

Highly integrated and interconnected carbon nanofiber hybrid nanofibers decorated with samarium(III) oxide (Sm₂O₃ NPs) nanoparticles was synthesized by ultrasound assisted method and characterized using X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), energy dispersive x-rays (EDX), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrocatalytic activity (ECA) was monitored by detection of toxic 4-nitrophenol under phosphate buffer (pH 7.0). The sonochemical route employed was efficient to prepare Sm₂O₃ NPs modified electrode and this class of catalysts might be active electrocatalyst for the detection of 4-nitrophenol in drinking water. The screen-printed carbon electrode (SPCE) modified with Sm₂O₃ NPs@f-CNFs was fabricated in a facile way for the sensitively electrochemical determination of 4-nitrophenol. Under optimized preparation conditions, the electrochemical testing (differential pulse voltammetry) of 4-nitrophenol exhibited a reduction peak at -0.64 V. Compared with bare SPCE, Sm₂O₃ NPs, f-CNFs, Sm₂O₃ NPs@f-CNFs modified SPCE showed highest current response. The reduction peaks current vs the concentration of 4-nitrophenol exhibits a linear relation with the concentration range from 0.02 to 387.2 μM and the limit of detection was determined to be M (S/N = 3). In addition, Sm₂O₃ NPs@f-CNFs was contributed to detecting 4-nitrophenol in drinking water and river water samples with the recover ranging from 95.6% to 98.2%.

Ultrasound-assisted synthesis of α-MnS (alabandite) nanoparticles decorated reduced graphene oxide hybrids: Enhanced electrocatalyst for electrochemical detection of Parkinson's disease biomarker

Herein, novel manganese sulfide nanoparticles (MnS NPs) decorated reduced graphene oxide (rGOS) nanocomposite have been designed through a facile ultrasound-assisted method and followed by a sonication process. After then, as-synthesized α-MnS@rGOS was characterized by HRTEM, FESEM, XPS, XRD and EIS. Furthermore, the α-MnS@rGOS nanocomposite modified SPCE (screen-printed carbon electrode) shows excellent electrochemical sensing performance towards Parkinson's disease biomarker of dopamine (DA). Moreover, the fabricated sensor showed a wide linear range for dopamine between 0.02 and 438.6 µM and nanomolar detection limit (3.5 nM). In addition, the α-MnS@rGOS modified SPCE showed selectivity towards the detection of dopamine in presence of a 10-fold higher concentration of other important biomolecules. The nanocomposite film modified SPCE sensor was good stable and reproducible towards the detection of Parkinson's disease biomarker. Furthermore, the as-synthesized α-MnS@rGOS nanocomposite modified SPCE has been applied to the determination of dopamine in human serum, rat serum and pharmaceutical samples with acceptable recoveries.

Facile sonochemical synthesis of perovskite-type SrTiO3 nanocubes with reduced graphene oxide nanocatalyst for an enhanced electrochemical detection of α-amino acid (tryptophan)

In this paper, perovskite-type SrTiO₃ nanocubes decorated reduced graphene oxide is synthesized by sonochemical method. The as-synthesized SrTiO₃@RGO nanocomposite was confirmed by XRD, TEM, SEM, elemental mapping and electrochemical technique. Furthermore, surface morphological and X-ray diffraction studies revealed the formation and high loading of SrTiO₃ nanocubes on reduced graphene oxide matrix. The SrTiO₃@RGO nanocomposite modified electrode shows an excellent electrochemical detection towards of amino acid (tryptophan). The developed sensor was showed a wide linear range from 30 nM to 917.3 µM and detection limit is 7.15 nM. Furthermore, the sensitivity was calculated to be 9.11 µA µM^-1 cm². In addition, the proposed modified sensor is exhibited good selectivity, stability, reproducibility and repeatability. The SrTiO₃@RGO catalyst modified electrode was successfully applied to tryptophan analysis in biological samples.

Ultrasound-assisted synthesis of tungsten trioxide entrapped with graphene nanosheets for developing nanomolar electrochemical (hormone) sensor and enhanced sensitivity of the catalytic performance

Herein, we have reported a simple sonochemical synthesis of multi-layer graphene covered tungsten trioxide nanoballs (WO₃ NBs) and the nanocomposite was characterized by FESEM, HRTEM, XRD, XPS, CV and EIS. Furthermore, progesterone (PGT) is a preferred marker for various biological problems like pregnancy problem, mood swings, anxiety, depression, nervousness and body pain. Therefore, its selective and sensitive determination in various biological fluids is beneficial for the evaluation of malformation problems. We describe the fabrication of an amperometric and non-enzymatic biosensor based on WO₃ NBs@GR nanocomposite modified electrode for nanomolar detection of PGT. The results showed that the nanocomposite modified electrode exhibit well-defined electro-oxidation peak compared to bare and control electrodes, demonstrating the superior electrocatalytic ability and performances. The fabricated modified sensor was facilitates the analysis of PGT in the concentration ranges of 0.025-1792.5 µM with a low detection limit of 4.28 nM. Further, the as-prepared WO₃ NBs@GR electrode has been applied to determination of PGT in human blood samples with outstanding recovery results and more importantly, the facile and environment-friendly sonochemical construction strategy extended here, may be open a cost-effective way for setting up the nanocomposites based (bio) sensing platform.

Facile synthesis of mesoporous WS2 nanorods decorated N-doped RGO network modified electrode as portable electrochemical sensing platform for sensitive detection of toxic antibiotic in biological and pharmaceutical samples

We report a facile and ultrasound assisted sonochemical synthesis of a Tungsten disulfide nanorods decorated nitrogen-doped reduced graphene oxide based nanocomposite. The WS₂ NRs/N-rGOs nanocomposite was characterized by FESEM, HRTEM, XRD, XPS and electrochemical methods and its application towards the electrochemical detection of organo-arsenic drug (coccidiostat). The WS₂ NRs/N-rGOs modified SPCE was used for the electrochemical reduction of roxarsone (ROX) and it showed superior electrocatalytic performance in terms of reduction peak current and shift in overpotential when compared to those of WS₂ NRs/SPCE, N-rGOs/SPCE and based SPCE. The WS₂ NRs/N-rGOs modified SPCE showed an excellent sensing ability towards ROX in nitrogen saturated phosphate buffer (PB) then the other controlled modified and unmodified electrodes. The WS₂ NRs/N-rGOs/SPCE displays high sensitive response towards ROX and gives wide linearity in the range of 0.1-442.6 µM ROX in neutral phosphate buffer (pH 7.0) and the sensitivity of the sensor is calculated as 14.733 µA µM^-1 cm^-2. The WS₂ NRs/N-rGOs nanocomposite modified sensor also exhibits valuable ability of anti-interference to electroactive analytes. Furthermore, the as-prepared WS₂ NRs/N-rGOs/SPCE has been applied to the determination of ROX in biological and pharmaceutical samples.

Electrochemical co-deposition synthesis of Au-ZrO2-graphene nanocomposite for a nonenzymatic methyl parathion sensor

For the first time, a simple electrochemical co-deposition was utilized to synthesis the gold and zirconia nanocomposites modified graphene nanosheets on glassy carbon electrode (Au-ZrO₂-GNs/GCE) for electrocatalytic analysis of methyl parathion (MP). According to Field-Emission Scanning Electron Microscopy (FE-SEM), Transmission Electronic Microscopy (TEM) and X-Ray Diffraction (XRD), the gold nanoparticles were uniformly distributed on the surface of graphene-based nanocomposite. The Au-ZrO₂-GNs/GCE based sensor exhibited superior capacity for MP detection, ascribed to the strong affinity of zirconia towards the phosphoric group, as well as the high catalytic activity and good conductivity of Au-GNs. The best fabrication and work conditions were then obtained by systematically optimization of the electrodeposition process, pH value and enrichment time. Compared to the gold nanoparticles, zirconia or graphene modified electrodes, AuZrO₂-GNs/GCE sensor displayed superior electro-catalytic response toward MP oxidation. The sensor response current of square wave voltammetry was highly linearly correlated with the MP concentrations range of 1-100 ng mL^-1 and 100-2400 ng mL^-1 with the detection limit of 1 ng mL^-1. The Au-ZrO₂-GNs/GCE nanocomposite sensor showed excellent accuracy and reproducibility for detection of MP in Chinese cabbage samples, providing a new method for efficient pesticide detection in practical applications.

Sonochemical synthesis of bismuth(III) oxide decorated reduced graphene oxide nanocomposite for detection of hormone (epinephrine) in human and rat serum

Herein, we report an efficient electrochemical sensor strategy for determination of epinephrine based on Bi₂O₃ nanoparticle decorated reduced graphene oxide nanocomposite (Bi₂O₃@RGO). The Bi₂O₃@RGO was prepared by simple ultrasonic method and then it's morphological and crystal structure aspects were well characterized by physiological instruments. The electrode-electrolyte interfacial properties were examined to ensure the catalytic ability of composite sensing towards EP. The composite was deposited on the multi-conventional screen-printed electrode and was found to be desirable performance toward EP oxidation. The amperometric EP sensing exhibited good reproducible and sensitive which able to detect as low as concentration of 2.14 nM. Furthermore, good reproducibility, long-term stability and repeatability were obtained from the electrode in experiment. Moreover, the EP sensing method was successfully applied in human and rat blood serum, the recoveries were validated by HPLC method. It indicates the reliability of the method in practical analysis.

Determination of the antioxidant propyl gallate in meat by using a screen-printed electrode modified with CoSe2 nanoparticles and reduced graphene oxide

A voltammetric sensor is described for the quantitation of propyl gallate (PG). A screen-printed carbon electrode (SPCE) was modified with reduced graphene sheets that were decorated with cobalt diselenide nanoparticles (CoSe₂@rGO). The material was hydrothermally prepared and characterized by several spectroscopic techniques. The modified SPCE displays excellent electrocatalytic ability towards PG. Differential pulse voltammetry, with a peak voltage at 0.34 V (vs. Ag/AgCl) has a sensitivity of 12.84 μA·μM^-1·cm^-2 and a detection limit as low as 16 nM. The method is reproducible, selective, and practical. This method was applied to the determination of PG in spiked meat samples, and the result showed an adequate recovery. Graphical abstract Schematic of a new method for fast and sensitive electrochemical determination of the food additive propyl gallate in meat.

Fabricating and regulating peroxidase-like activity of eggshell membrane-templated gold nanoclusters for colorimetric detection of staphylococcal enterotoxin B

Fluorescent eggshell membrane-templated gold nanoclusters (Au-ESM) can be obtained in a facile and low-cost manner in this study. The fluorescence of the Au-ESM may be significantly quenched by mercapto-compounds and peroxidase-like activity of Au-ESM could be regulated by the reaction process with glutathione. Moreover, the catalytic activity of the mimetic enzyme membrane could be modulated by immunoreactions. An immunoassay for colorimetric determination of staphylococcal enterotoxins B (SE-B) using colored gold nanoparticles was established based on the catalytic activity adjusted by the target molecules. This colorimetric assay can detect SE-B at the concentration range of 0.4-20 ng/mL and the limit of detection (LOD) is 0.12 ng/mL. As a practical application, the proposed colorimetric assay was further utilized to detect SE-B in food samples such as flour, corn and rice, requiring very low volume of sample and exhibiting great sensitivity and high accuracy, which provides promising platform for development of point-of-care diagnostic devices with biomedical and food safety applications.

Hexammine cobalt(iii) coordination complex grafted reduced graphene oxide composite for sensitive and selective electrochemical determination of morin in fruit samples

The RGO/[Co(NH₃)₆]³⁺/GCE modified GCE was potentially applied for the electrochemical detection of MR.