Electrochemical Detection of Tetracycline on Highly Sensitive Benzene Sourced CVD Graphene‐Gold Nanoparticles Nanointerfaces

Monitoring Antibiotic Pollutants in Water Using Electrochemical Techniques: A Detailed Review

This review article examines the application of electrochemical methods for detecting four prevalent antibiotics - azithromycin (AZM), amoxicillin (AMX), tetracycline (TC), and ciprofloxacin (CIP) - in environmental monitoring. Although, antibiotics are essential to contemporary treatment, their widespread usage has contaminated the environment and given rise to antibiotic resistance. Electrochemical techniques offer sensitive, rapid, and cost-effective solutions for monitoring these antibiotics, addressing the limitations of traditional methods. The review provides a comprehensive analysis of various electrochemical approaches, including voltammetry, amperometry, photoelectrochemical and so on, highlighting their principles, advantages, and limitations. Key findings underscore the effectiveness of these methods in detecting antibiotics at trace levels in complex environmental matrices. Implications for environmental health and policy are discussed, emphasizing the importance of reliable detection techniques in mitigating antibiotic resistance and safeguarding ecosystems. Lastly, the article outlines future research directions aimed at enhancing the sensitivity, selectivity, and field-applicability of electrochemical sensors, thus advancing their utility in environmental monitoring and public health protection.

Preparation of a Carbon paste electrode with Active materials for the detection of Tetracycline

The Electrochemical sensor based on carbon-clay paste electrode (CCPE) was constructed for sensitive determination of Tetracycline (Tc). The mineralogical composition, morphology, structure and performance of CCPE were characterized using X-ray diffraction powder, Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Cyclic Voltammetry analysis. The CCPE is constituted of two types of clay having the ratio 1/1 and 2/1 characteristic of kaolinite and montmorillonite clay respectively. Its porous structure is ascribed to the presence of graphite. The CCPE exhibited a good electrocatalytic activity towards the oxidation of Tc. The electrochemical kinetics and mechanism of Tc were proposed, showing that Tc electrocatalytic oxidation reaction was controlled by diffusion process and took place in three steps. A low concentration of Tc was detected by amperometry with the linear ranges of 0.5μM-0.8 μM (R2 = 0.98), the sensitivity was 8.01 μA/μM.cm2, the limit of detection and quantification were 5.16x10-3μM(S/N = 3) and 1.72x10-2μM respectively. Thus, the proposed electrode provides a promising and prospective CCPE sensing platform for the detection of Tc in the environment.

Aggregation enhanced emissive orange carbon dots for information encryption and detection of Fe3+ and tetracycline

In this study, N-doped fluorescent carbon dots with aggregation enhanced emission (N-CDs) were synthesized by a simple and rapid microwave-assisted method using o-phenylenediamine (OPD) and urea as raw materials and water as solvent. The fluorescence quantum yield of N-CDs was 20.64 %. N-CDs can be applied as invisible inks for message encryption. Furthermore, the fluorescence intensity of N-CDs can be quenched by Fe3+ and enhanced by tetracycline (TC). Therefore, two fluorescent probes were simultaneously designed in this study. Namely, "turn-off" fluorescence probe for Fe3+ and "turn-on" fluorescence probe for TC. The linear detection range of Fe3+ is from 1 to 70 μM, and detection limit is 0.1011 μM; the linear detection range of TC is from 0.1 to 10 μM, and the detection limit can be as low as 0.0555 μM. In this paper, the mutual interference between Fe3+ and TC was investigated for the first time. The detection of Fe3+ and TC was made more accurate by optimizing pH conditions and adding masking agent.

Pure and doped carbon quantum dots as fluorescent probes for the detection of phenol compounds and antibiotics in aquariums

The resulting antibiotic residue and organic chemicals from continuous climatic change, urbanization and increasing food demand have a detrimental impact on environmental and human health protection. So, we created a unique B, N-CQDs (Boron, Nitrogen doping carbon quantum dots) based fluorescent nanosensor to investigate novel sensing methodologies for the precise and concentrated identification of antibiotics and phenol derivatives substances to ensure that they are included in the permitted percentages. The as-prepared highly fluorescent B, N-CQDs had a limited range of sizes between 1 and 6 nm and average sizes of 2.5 nm in our study. The novel B, N-CQDs showed high sensitivity and selectivity for phenolic derivatives such as hydroquinone, resorcinol, and para aminophenol, as well as organic solvents such as hexane, with low detection limits of 0.05, 0.024, 0.032 and 0.013 µM respectively in an aqueous medium. The high fluorescence B, N-CQDs probes were examined using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and UV/VIS spectroscopy. The outcomes were compared to carbon quantum dots (CQDs) previously generated from Urea.

3D rhombohedral microcrystals metal-organic frameworks for electrochemical and fluorescence sensing of tetracycline

Zirconium-based metal-organic frameworks (MOF) exhibiting 3D rhombohedral microcrystals were synthesized by the solvothermal method. The structure, morphology, composition, and optical properties of the synthesized MOF were carried out using different spectroscopic, microscopic, and diffraction techniques. Synthesized MOF was rhombohedral in shape and the cage structure of these crystalline molecules was the active binding site of the analyte, tetracycline (TET). The electronic property and size of the cages are chosen such that a specific interaction with TET was observed. Sensing of the analyte was demonstrated by both the electrochemical and fluorescent techniques. The MOF had significant luminescent properties and exhibited excellent electro-catalytic activity due to embedded zirconium metal ions. An electrochemical and fluorescence sensor was fabricated towards TET where TET binds via hydrogen bond to MOF, and causes fluorescence quenching due to the transfer of electrons. Both approaches exhibited high selectivity and good stability in the presence of interfering molecules such as antibiotics, biomolecules, and ions; and showed excellent reliability in tap water and wastewater sample analysis.

Recent advances on rapid detection and remediation of environmental pollutants utilizing nanomaterials-based (bio)sensors

Environmental safety has become a significant issue for the safety of living species, humans, and the ecosystem as a consequence of the harmful and detrimental consequences of various pollutants such as pesticides, heavy metals, dyes, etc., emitted into the surroundings. To resolve this issue, various efforts, legal acts, scientific and technological perspectives have been embraced, but still remain a global concern. Furthermore, due to non-portability, complex detection, and inappropriate on-site recognition of sophisticated laboratory tools, the real-time analysis of these environmental contaminants has been limited. As a result of innovative nano bioconjugation and nanofabrication techniques, nanotechnology enables enhanced nanomaterials (NMs) based (bio)sensors demonstrating ultra-sensitivity and a short detection time in real-time analysis, as well as superior sensitivity, reliability, and selectivity have been developed. Several researchers have demonstrated the potent detection of pollutants such as Hg²⁺ ion by the usage of AgNP-MD in electronic and optoelectronic methods with a detection limit of 5-45 μM which is quite significant. Taking into consideration of such tremendous research, herein, the authors have highlighted 21st-century strategies towards NMs based biosensor technology for pollutants detection, including nano biosensors, enzyme-based biosensors, electrochemical-based biosensors, carbon-based biosensors and optical biosensors for on-site identification and detection of target analytes. This article will provide a brief overview of the significance of utilizing NMs-based biosensors for the detection of a diverse array of hazardous pollutants, and a thorough understanding of the detection processes of NMs-based biosensors, as well as the limit of quantification (LOQ) and limit of detection (LOD) values, rendering researchers to focus on the world's need for a sustainable earth.

Colorimetric assay for tetracyclines based on europium ion-induced aggregation of gold nanoparticles

Oxytetracycline-capped gold nanoparticles (OTC-Au NPs) were prepared using sodium borohydride as the reductant and OTC as the capping agent, respectively. The prepared OTC-Au NPs with a size of 6 nm have a maximum surface plasma resonance (SPR) absorption located at 514 nm. The OTC on the surface of Au NPs still can coordinate with Eu³⁺ ions. Due to the property that OTC has multivalent binding sites with Eu³⁺ ions, Eu³⁺ ions can induce the aggregation of OTC-Au NPs. Based on the Eu³⁺ ions-aggregated OTC-Au NPs, a simple aptamer-free colorimetric sensing method for TCs was developed. Briefly, free TCs compete with OTC on the surface of Au NPs resulting in the change of OTC-Au NPs from an aggregation state to a dispersed state. The whole process takes only 5 min, and as low as 20 nM OTC, 14 nM tetracycline (TC), and 20 nM doxycycline (DC) could be sensitively detected, respectively. The proposed method was also featured as good repeatability and specificity, and was applied to the detection of OTC in lake water with satisfactory recovery.

Graphene-based electrochemical sensors for antibiotic detection in water, food and soil: A scientometric analysis in CiteSpace (2011-2021)

The residues of antibiotics in the environment pose a potential health hazard, so highly sensitive detection of antibiotics has always appealed to analytical chemists. With the widespread use of new low-dimensional materials, graphene-modified electrochemical sensors have emerged as an excellent candidate for highly sensitive detection of antibiotics. Graphene, its derivatives and its composites have been used in this field of exploration in the last decade. In this review, we have not only described the field using traditional summaries, but also used bibliometrics to quantify the development of the field. The literature between 2011 and 2021 was included in the analysis. Also, the sensing performance and detection targets of different sensors were compared. We were able to trace not only the flow of research themes, but also the future areas of development. Graphene is a material that has a high potential to be used on a large scale in the preparation of electrochemical sensors. How to design a sensor with selectivity and low cost is the key to bring this material from the laboratory to practical applications.

Ilies) S, Orha C, Manea F. Graphene Oxide Electroreduced onto Boron-Doped Diamond and Electrodecorated with Silver (Ag/GO/BDD) Electrode for Tetracycline Detection in Aqueous Solution

A new electrochemical sensor designed by modifying the commercial boron-doped diamond (BDD) electrode with graphene oxide (GO) reduced electrochemically and further electrodecorated with silver (Ag), named the Ag/GO/BDD electrode, was selected among a series of the BDD, GOelectroreduced onto BDD (GO/BDD) and silver electrodeposited onto BDD (Ag/BDD) electrodes for the detection of tetracycline (TC) in aqueous solution. The best results regarding the sensitivity of 46.6 µA·µM-1·cm-2 and the lowest limit of detection of 5 nM was achieved using square-wave voltammetry (SWV) operated at the step potential of 5 mV, modulation amplitude of 200 mV and the frequency of 10 Hz in alkaline medium. The application of the alkaline supporting electrolyte-based procedure is limited for water monitoring due to the presence of chloride that interferes with TC detection; however, it can be applied for quantitative determination of pharmaceutical formulations. 0.1 M Na2SO4 supporting electrolyte eliminated chloride interference and can be used for the application of Ag/GO/BDD in practical detection of TC in water.