Capillary electrophoresis of proteins 2005–2007

Size-based characterization of dendrigraft poly(L-lysine) by free solution capillary electrophoresis using polyelectrolyte multilayer coatings

Dendrigraft poly(L-lysine) (DGL) constitutes a promising dendritic-like drug vehicle with high biocompatibility and straightforward access via ring-opening polymerization of N-carboxyanhydride in water. The characterization of the different generations of DGL is however challenging due to their heterogeneity in molar mass and branching ratio. In this work, free solution capillary electrophoresis was used to perform selective separation of the three first generations of DGL, and optimized conditions were developed to maximize inter-generation resolution. To reduce solute adsorption on the capillary wall, successive multiple ionic polymer layer coatings terminated with a polycation were deposited onto the inner wall surface. PEGylated polycation was also used as the last layer for the control of the electroosmotic flow (EOF), depending on the PEGylation degree and the methyl-polyethylene glycol (mPEG) chain length. 1 kDa mPEG chains and low grafting densities were found to be the best experimental conditions for a fine tuning of the EOF leading to high peak resolution. Molar mass polydispersity and polydispersity in effective electrophoretic mobility were successfully determined for the three first generations of DGL.

Chitosan derivatives as dynamic coatings for transferrin glycoform separation in capillary electrophoresis

Chitosan and its derivatives are interesting biopolymers for different field of analytical chemistry, especially in separation techniques. The present study was aimed at testing chitosan water soluble derivatives as dynamic coating agents for application to capillary electrophoresis. In particular, chitosan was modified following three different chemical reactions (nucleophilic substitution, reductive amination, and condensation) to introduce differences in charge and steric hindrance, and to assess the effect of these physico-chemical properties in capillary electrophoresis. The effects were tested on the capillary electrophoretic separation of the glycoforms of human transferrin, an important iron-transporting serum protein, one of which, namely disialo-transferrin (CDT), is a biomarker of alcohol abuse. Chitosan derivatives were characterized by using NMR and 1H NMR, HP-SEC-TDA, DLS, and rheology. The use of these compounds as dynamic coatings in the electrolyte running buffer in capillary electrophoresis was tested assessing the peak resolution of the main glycoforms of human transferrin and particularly of disialo-transferrin. The results showed distinct changes of the peak resolution produced by the different derivatives. The best results in terms of peak resolution were achieved using polyethylene glycol (PEG)-modified chitosan, which, in comparison to a reference analytical approach, provided an almost baseline resolution of disialo-transferrin from the adjacent peaks.

Modifying last layer in polyelectrolyte multilayer coatings for capillary electrophoresis of proteins

Protein adsorption on the inner wall of the fused silica capillary wall is an important concern for capillary electrophoresis (CE) analysis since it is mainly responsible for separation efficiency reduction. Successive Multiple Ionic-polymer Layers (SMIL) are used as capillary coatings to limit protein adsorption, but even low residual adsorption strongly impacts the separation efficiency, especially at high separation voltages. In this work, the influence of the chemical nature and the PEGylation of the polyelectrolyte deposited in the last layer of the SMIL coating was investigated on the separation performances of a mixture of four model intact proteins (myoglobin (Myo), trypsin inhibitor (TI), ribonuclease a (RNAse A) and lysozyme (Lyz)). Poly(allylamine hydrochloride) (PAH), polyethyleneimine (PEI), ε-poly(L-lysine) (εPLL) and α-poly(L-lysine) (αPLL) were compared before and after chemical modification with polyethyleneglycol (PEG) of different chain lengths. The experimental results obtained by performing electrophoretic separations at different separation voltages allowed determining the residual retention factor of the proteins onto the capillary wall via the determination of the plate height at different solute velocities and demonstrated a strong impact of the polycationic last layer on the electroosmotic mobility, the separation efficiency and the overall resolution. Properties of SMIL coatings were also characterized by quartz microbalance and atomic force microscopy, demonstrating a glassy structure of the films.

Preparation of photosensitive diazotized poly (vinyl alcohol-b-styrene) covalent capillary coatings for capillary electrophoresis separation of proteins

In this paper, we have developed a novel method for the preparation of covalently connected capillary coatings in which diazotized poly (vinyl alcohol-b-styrene) (diazo-P(VA-b-St)) was used as a photosensitive coating agent. Firstly, the diazo-P(VA-b-St) coating was self-assembled on the inner surface of the capillary, and then irradiated by ultraviolet (UV) light to convert the ionic bonding into covalent bonding through the unique photochemical reaction of diazo groups. The covalently connected coatings inhibited the protein adsorption on the inner surface of the capillary, as a result, the baseline protein separation of ribonuclease A (RNase A), lysozyme (Lyz) and bovine serum albumin (BSA) were attained by utilizing the capillary electrophoresis (CE). The covalently connected diazo-P(VA-b-St) capillary coatings have greater CE separation performance with magnificent repeatability and enhanced stability, when compared with non-covalently coated or bare capillaries. This strategy to synthesize photosensitive diazo-P(VA-b-St) capillary coatings for their use in capillary electrophoresis separation of proteins is highly environment-friendly as it does not involve the use of extremely noxious and moisture penetrating coatings of silane.

The Use of a 3D-Printed Microfluidic Device and Pressure Mobilization for Integrating Capillary Electrophoresis with Electrochemical Detection

Capillary electrophoresis coupled with electrochemical detection can be a powerful analysis tool; however, previous methods developed to integrate these two techniques can often times be fragile and have alignment issues such that there are no commercially available approaches. In this paper, we present the use of a 3D-printed Wall-Jet Electrode device for integrating capillary electrophoresis with electrochemical detection. A pressure mobilization step was also utilized to further reduce noise by allowing the electrophoresis separation step to continue only until the first analyte was close to elution. Then, the separation voltage was terminated and pressure-based flow was used for elution of the analyte bands onto the electrode surface with a wall-jet configuration. It is shown that the pressure-based elution is beneficial for the reduction of baseline noise and elimination of field effects. A mixture of catecholamines were separated to demonstrate effectiveness of the system. In addition, the system was coupled with a Beckman Coulter commercial capillary electrophoresis instrument in a straightforward manner. The system was also shown to be effective in separations done with a high ionic strength physiological buffer. This 3D printing approach can be used by researchers to utilize electrochemical detection on commercial capillary electrophoresis systems by downloading the provided STL and/or CAD files.

Recent advances in protein analysis by capillary and microchip electrophoresis

This review article describes the significant recent advances in the analysis of proteins by capillary and microchip electrophoresis during the period from mid-2014 to early 2017. This review highlights the progressions, new methodologies, innovative instrumental modifications, and challenges for efficient protein analysis in human specimens, animal tissues, and plant samples. The protein analysis fields covered in this review include analysis of native, reduced, and denatured proteins in addition to Western blotting, protein therapeutics and proteomics.

Screening of Small Intact Proteins by Capillary Electrophoresis Electrospray Ionization-Mass Spectrometry (CE-ESI-MS)

Capillary electrophoresis (CE) has been shown to be a suitable separation technique for complex samples. Combined with electrospray ionization-mass spectrometry (ESI-MS), it is a powerful tool offering the opportunity of high selectivity and sensitivity combined with the possibility to identify and characterize intact proteins. In this protocol, we demonstrate a screening method for intact proteins based on capillary zone electrophoresis (CZE) separation coupled with online mass spectrometric detection. In order to avoid protein-wall interactions, a neutral coated capillary is used to create a universal method for proteins with both low and high electrophoretic mobilities. In addition, we show the successful validation and application of this screening method for a set of eight standard proteins and the glycoprotein erythropoietin.

Evaluation of fritless solid-phase extraction coupled on-line with capillary electrophoresis-mass spectrometry for the analysis of opioid peptides in cerebrospinal fluid

Fritless SPE on-line coupled to CE with UV and MS detection (SPE-CE-UV and SPE-CE-MS) was evaluated for the analysis of opioid peptides. A microcartridge of 150 μm id was packed with a C18 sorbent (particle size > 50 μm), which was retained between a short inlet capillary and a separation capillary (50 μm id). Several experimental parameters were optimized by SPE-CE-UV using solutions of dynorphin A (DynA), endomorphin 1 (End1), and methionine-enkephaline (Met). A microcartridge length of 4 mm was selected, sample was loaded for 10 min at 930 mbar and the retained peptides were eluted with 67 nL of an acidic hydro-organic solution. Using SPE-CE-MS, peak area and migration time repeatabilities for the three opioid peptides were 12-27% and 4-5%, respectively. SPE recovery was lower for the less hydrophobic DynA (22%) than for End1 (66%) and Met (78%) and linearity was satisfactory in all cases between 5 and 60 ng/mL. The LODs varied between 0.5 and 1.0 ng/mL which represent an enhancement of two orders of magnitude when compared with CE-MS. Cerebrospinal fluid (CSF) samples spiked with the opioid peptides were analyzed to demonstrate the applicability to biological samples. Peak area and migration time repeatabilities were similar to the standard solutions and the opioid peptides could be detected down to 1.0 ng/mL.

Influence of polyelectrolyte shape on its sedimentation behavior: effect of relaxation electric field

The sedimentation of an isolated, charged polyelectrolyte (PE) subjected to an applied field is modeled theoretically, taking into account the variation of its shape. In particular, the effects of double-layer relaxation, effective charge density, and strength of the induced relaxation electric field are examined. We show that the interaction of these effects yields complex and interesting sedimentation behaviors. For example, the behavior of the electric force acting on a loosely structured PE can be different from that on a compactly structured one; the former is dominated mainly by the convective fluid flow. For thick double layers, electric force has a local maximum as the Reynolds number varies, but tends to increase monotonically with increasing Reynolds number if the layer is thin. The drag factor is found to behave differently from literature results. The shape of a PE significantly influences its sedimentation behavior by affecting the amount of counterions attracted to its interior and the associated local electric field. Interestingly, a more stretched PE has a higher effective charge density but experiences a weaker electric force.

Simulation of polyelectrolyte electrophoresis: effects of the aspect ratio, double-layer polarization, effective charge, and electroosmotic flow

The electrophoresis of a deformable polyelectrolyte (PE) is studied theoretically by considering a Poisson-Nernst-Planck model coupled with modified Navier-Stokes equations, taking account of the effects of double-layer polarization, counterion condensation, and electroosmotic flow. The influences of the local electric field and the effective PE charge on the PE mobility are discussed, thereby providing a complete picture for the phenomenon under consideration. Our model explains successfully the presence of a local minimum in the mobility of a highly charged PE as the bulk salt concentration varies, as observed experimentally. Numerical simulation also reveals several interesting and important results. For example, the more a PE is stretched in the direction of electrophoresis, the larger is its mobility. As the double layer becomes thin, the local electric field becomes independent of the PE shape, and its behavior mainly depends upon its effective charge. We show that the force that stretches a PE is maximal when it is spherical and decreases with an increasing aspect ratio, which has not been reported previously.

Optimization of the enantioseparation of a diaryl-pyrazole sulfonamide derivative by capillary electrophoresis in a dual CD mode using experimental design

A CE method using dual cationic and neutral cyclodextrins (CD) was optimized for the enantiomeric separation of a compound presenting a diaryl sulfonamide group. Preliminary studies were made to select the optimal CDs and pH of the BGE. Two CDs (amino-β-CD and β-CD) were selected to separate the enantiomers in a 67 mM phosphate buffer at pH 7.4. However, the repeatability of the analyses obtained on bare-fused silica capillary was not acceptable owing to the adsorption of the amino-β-CD to the capillary. To prevent this, a dynamic coating of the capillary was used employing five layers of ionic-polymer (poly(diallyldimethylammonium) chloride (PDADMAC) and poly(sodium 4-styrenesulfonate). The efficiency of the coating was assessed by measuring the EOF stability. Repeatability of the injections was obtained when intermediate coating with PDADMAC was performed between each run. Secondly, this enantioseparation method was optimized using a central composite circumscribed design including three factors: amino-β-CD and β-CD concentrations and the percentage of methanol. Under the optimal conditions (i.e. 16.6 mM of amino-β-CD, 2.6 mM of β-CD, 0% MeOH in 67 mM phosphate buffer (pH 7.4) as BGE, cathodic injection 0.5 psi, 5 s, separation voltage 15 kV and a temperature of 15°C), complete enantioresolution of the analyte was obtained. It is worth mentioning that the design of experiments (DOE) protocol employed showed a significant interaction between CDs, highlighting the utility of DOE in method development. Finally, small variations in the ionic-polymer concentrations did not significantly influence the EOF, confirming the robustness of the coating method.

Highly charged polyelectrolyte coatings to prevent adsorption during protein and peptide analysis in capillary electrophoresis

Capillary electrophoresis (CE) is an interesting technique for protein and peptide analysis. However, one of the major problems concerns sample adsorption on the internal capillary wall. The use of non-covalent coatings using highly charged polyelectrolytes is an efficient, simple, and fast approach to reduce peptide and protein adsorption phenomena. We have studied in a systematic manner the effect of coating conditions on the stability and efficiency of multilayer coatings using poly(diallyldimethylammonium) chloride (PDADMAC) as polycation and polystyrene sulfonate (PSS) as polyanion. When optimal conditions defined in the protocols are used, very stable coatings are obtained and adsorption phenomena are eliminated. The coatings are stable over a large range of pH buffer (2-10) and in the presence of organic solvent. Hundreds of analyses can be performed without coating regeneration. Coated capillaries can be easily stored and reused.

Capillary electrophoresis/mass spectrometry relevant to pharmaceutical and biotechnological applications

Advanced analytical techniques play a crucial role in the pharmaceutical and biotechnological field. In this context, capillary electrophoresis/mass spectrometry (CE/MS) has attracted attention due to efficient and selective separation in combination with powerful detection allowing identification and detailed characterization. Method developments and applications of CE/MS have been focused on questions not easily accessible by liquid chromatography/mass spectrometry (LC/MS) as the analysis of intact proteins, carbohydrates, and various small molecules, including peptides. Here, recent approaches and applications of CE/MS relevant to (bio)pharmaceuticals are reviewed and discussed to show actual developments and future prospects. Based on other reviews on related subjects covering large parts of previous works, the paper is focused on general ideas and contributions of the last 2 years; for the analysis of glycans, the period is extended back to 2006.

A novel PEG coating immobilized onto capillary through polydopamine coating for separation of proteins in CE

The antifouling PEG-immobilized capillary was introduced for the protein separation in CE through mussel adhesive protein inspired polydopamine coating for the first time. The polydopamine, formed by spontaneous oxidative polymerization of dopamine at alkaline in the inner surface of capillary, was exploited to immobilize amine-functionalized PEG onto the capillary surface. During the process, polydopamine-graft-PEG copolymer was formed via Michael addition or Schiff base reactions. The polymer coating was observed using X-ray photoelectron spectroscopy and SEM. And both of them indicated the formation of the polymer coating. A comparative study of EOF showed that the novel coating could provide effective suppression of EOF and minimized adsorption of proteins. As a consequence, fast and efficient separations of three proteins such as lysozyme, cytochrome c, and ribonuclease A were obtained within a broad pH range. Furthermore, the long-term stability of polydopamine-graft-PEG coating in consecutive protein separation runs and the high separation efficiency proved that this novel coating was capable of minimizing protein adsorption during the capillary separation. The successful capillary performance also was demonstrated in the separation of protein mixture and milk powder samples at acidic pH.

Size separation of proteins by capillary zone electrophoresis with cationic hitchhiking

The paper describes a method of size separation of proteins by capillary sieving electrophoresis with cationic surfactant. Proteins are separated within 12 min with repeatability of migration times better than 0.2%. Some proteins achieve the separation efficiency of 200,000 theoretical plates. The method can be used for determination of protein relative molecular masses. The accuracy of the determined relative molecular masses and the limitation of the method were investigated by the analysis of more than 60 proteins. The method also allows separation of protein oligomers. Proteins can be quantitated after the electrokinetic injection in the concentration range 0.07-0.43 g/L. The average detection limit is about 2 mg/L.

Detection and identification of a serine to arginine sequence variant in a therapeutic monoclonal antibody

Sequence variants, also known as unintended amino acid substitutions in the protein primary structure, are one of the critical quality attributes needed to be monitored during process development of monoclonal antibodies (mAbs). Here we report on analytical methods for detection and identification of a sequence variant in an IgG1 mAb expressed in Chinese hamster ovary (CHO) cells. The presence of the sequence variant was detected by an imaged capillary isoelectric focusing (ICIEF) assay, showing a new basic species in mAb charge variant profile. The new basic variant was fractionated and enriched by ion-exchange chromatography, analyzed by reduced light and heavy chain mass determination, and characterized by HPLC-UV/MS/MS of tryptic and endoproteinase Lys-C peptide maps. A Serine to Arginine sequence variant was identified at the heavy chain 441 position (S441R), and confirmed by using synthetic peptides. The relative level of the S441R variant was estimated to be in the range of 0.3-0.6% for several mAb batches analyzed via extracted ion chromatogram (EIC). This work demonstrates the effectiveness of using integrated analytical methods to detect and identify protein heterogeneity and the importance of monitoring product quality during mAb bioprocess development.