Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2008-2010)

Isotachophoresis: Theory and Microfluidic Applications

Isotachophoresis (ITP) is a versatile electrophoretic technique that can be used for sample preconcentration, separation, purification, and mixing, and to control and accelerate chemical reactions. Although the basic technique is nearly a century old and widely used, there is a persistent need for an easily approachable, succinct, and rigorous review of ITP theory and analysis. This is important because the interest and adoption of the technique has grown over the last two decades, especially with its implementation in microfluidics and integration with on-chip chemical and biochemical assays. We here provide a review of ITP theory starting from physicochemical first-principles, including conservation of species, conservation of current, approximation of charge neutrality, pH equilibrium of weak electrolytes, and so-called regulating functions that govern transport dynamics, with a strong emphasis on steady and unsteady transport. We combine these generally applicable (to all types of ITP) theoretical discussions with applications of ITP in the field of microfluidic systems, particularly on-chip biochemical analyses. Our discussion includes principles that govern the ITP focusing of weak and strong electrolytes; ITP dynamics in peak and plateau modes; a review of simulation tools, experimental tools, and detection methods; applications of ITP for on-chip separations and trace analyte manipulation; and design considerations and challenges for microfluidic ITP systems. We conclude with remarks on possible future research directions. The intent of this review is to help make ITP analysis and design principles more accessible to the scientific and engineering communities and to provide a rigorous basis for the increased adoption of ITP in microfluidics.

Large volume sample stacking of antiepileptic drugs in counter current electrophoresis performed in PAMAPTAC coated capillary

Electrophoretic stacking is developed for sensitive determination of three zwitterionic antiepileptics, namely vigabatrin, pregabalin and gabapentin, in human serum. CE separation is performed in a 25 μm fused silica capillary covalently coated with the copolymer of acrylamide with 5% content of permanently charged 3-acrylamidopropyl trimethylammonium chloride (PAMAPTAC). In background electrolyte of 500 mM acetic acid, the 5% PAMAPTAC generates an anodic electro-osmotic flow with a magnitude of (-18.6 ± 0.5) · 10^-9 m²V^-1s^-1, which acts against the direction of the electrophoretic migration of the analytes. A sample of the antiepileptic prepared in a 25% v/v infusion solution and 75% v/v acetonitrile is injected into the capillary in a large volume attaining a zone length of up to 270 mm. After turning on the separation voltage, the antiepileptics are isotachophoretically focussed behind the zone of Na⁺ ions with a sensitivity enhancement factor of 78. For the clinical determination of antiepileptics, the human serum is diluted with acetonitrile in a ratio of 1:3 v/v and a zone with a length of 90 mm is injected into the capillary. The method is linear in the 0.025-2.5 μg/mL concentration range; the attained limit of quantification is in the range 18.3-22.8 nmol/L; the within-day precision for the migration time is 0.8-1.2% and for the peak area 1.5-2.4%.

Field-amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE-ultraviolet (UV) detection based on the on-line preconcentration strategy of field-amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4-chlorophenol (4-CP), 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and 2,6-dichlorophenol (2,6-DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP, and 2,6-DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI-CZE-UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018-0.019 µg/mL and 0.0089-0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006-0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6-TCP, 2,4-DCP, and 2-CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0-119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37-8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.

Quantitative analysis of microcystin variants by capillary electrophoresis mass spectrometry with dynamic pH barrage junction focusing

Dynamic pH junction is an online focusing method in CE based on the electrophoretic mobility difference of analytes in the sample matrix and the background electrolyte. An advantage of this method over the conventional CE is that the sensitivity can be significantly improved. By injecting a long sample plug in the capillary and focusing the analytes at the pH boundary between the background electrolyte and sample matrix, the LOD can be improved by 10-100 folds. The dynamic pH junction method can be easily coupled with ESI-MS. In this work, we used this method for the analysis of microcystins (MCs). The detection limits and dynamic ranges were studied. The separation was optimized by adjusting the injection time, and concentrations and pH values of the background electrolyte. The optimization of analyte focusing leads to enhanced detection response compared to conventional injections, achieving 200-400 fold higher averaged peak heights for four microcystin (MC) variants. More importantly, this method was successfully used for the quantitative analysis of microcystins (MCs) in crude algae samples from natural water bodies, making it promising for practical applications.

On-line sample preconcentration by polarity switching in floating electrode-integrated microchannel

In this study, we found that the polarity switching was effective to enrich and separate fluorescent analytes which have weakly-dissociated groups in a floating platinum electrode (width, 50 µm; thickness, 2.5 µm)-integrated straight-channel in microchip electrophoresis (MCE). In the straight channel filled with an Alexa Flour 488 (AF488) solution, a sharp peak was observed after the polarity inversion with a 530-fold enhancement of the sensitivity relative to the conventional MCE analysis. By using a fluorescent pH indicator, we verified that a sharp high-pH zone was generated nearby the floating electrode and moved toward the anode with maintaining the high pH, which induced the sample enrichment like a dynamic pH junction mechanism. In the floating electrode-embedded channel, the mixture of AF488-labeled proteins was also well concentrated and separated within 100 s.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Capture efficiency of dynamic pH junction focusing in capillary electrophoresis

Dynamic pH junction is one of the techniques used to overcome the issue of poor concentration sensitivity in CE. By introducing a long sample plug in the capillary and focusing the target molecules at the pH boundary between the sample plug and background electrolyte, this focusing technique can achieve a detection limit that is one to two orders of magnitude better than conventional CE. For quantification purposes, the capturing efficiency of the injected molecules should be scrutinized. Focusing of all target molecules inside the sample plug is desired to ensure good linearity across the whole dynamic range. To test the theoretical prediction with a real experiment, nicotine is used as the test molecule for two types of dynamic pH junctions. The first one is with acidic background electrolyte, and can accommodate both optical detection methods and positive-ion mode mass spectrometric detection, while the other is suitable for optical detection only due to the use of basic separation background electrolyte. With a theoretical simulation study, it is demonstrated that, for either of these dynamic pH junctions, focusing of at least 95% of target molecule injected into the capillary was easily achievable. More importantly, a longer sample plug could generate a high percentage of molecules captured by dynamic pH junction focusing. Sharp, symmetrical peaks and good linearity for calibration curve can be obtained. Real samples with complex matrixes were also used to demonstrate that nicotine can be selectively focused and quantified using CE-MS.

Trace determination of tetracyclines in water samples by capillary zone electrophoresis combining off-line and on-line sample preconcentration

In this work, a sensitive and reliable method using capillary zone electrophoresis with UV detection has been developed for trace determination of tetracycline antibiotics in river, spring, and ground waters. A solid-phase extraction method using Oasis HLB was applied for off-line preconcentration and cleanup of water samples, in combination with an on-line preconcentration methodology named large volume sample stacking with polarity switching. Different parameters were optimized in order to obtain an adequate separation combined with the highest sensitivity, using 75 mM sodium carbonate (pH 10) and 1 mM EDTA as separation buffer, applying a voltage of 25 kV at 25°C. The samples were injected in water at 1 bar for 1 min, applying then -25 kV and starting the sample stacking. Sample matrix removal from the capillary was controlled by monitoring the electric current (when the 95% of the separation current is reached the stacking process is completed). The applied voltage was then switched from negative to a positive value of 25 kV in order to separate the compounds. Under optimum conditions, sensitivity enhancement factors ranged from 303 to 428 for the studied compounds. The combination of both off-line and on-line preconcentration procedures provided a total sensitivity enhancement factor about 20 000, obtaining detection limits from 67 to 167 ng/L. The precision (intra- and interday), expressed as %RSD was below 12%. Recoveries obtained from river, spring, and ground waters ranged from 87 to 96%. Thus, this procedure is suitable for monitoring these compounds in water samples.

On-Line Solid-Phase Extraction Capillary Electrophoresis Mass Spectrometry for Preconcentration and Clean-Up of Peptides and Proteins

One of the major drawbacks of capillary electrophoresis (CE) and other microscale separation techniques, for the analysis of low abundant peptides and proteins in complex samples, are the poor concentration limits of detection. Several strategies have been developed to improve CE sensitivity. Here, we describe an on-line solid-phase extraction capillary electrophoresis mass spectrometry method with a commercial C18 sorbent for clean-up and preconcentration of neuropeptides from highly diluted biological samples.

Novel and simple headspace in-tube microextraction coupled with capillary electrophoresis

In liquid phase microextraction, high enrichment factors can be obtained using an acceptor phase of small volume. By hanging an acceptor drop at the separation capillary tip, single drop microextraction (SDME) can be in-line coupled with capillary electrophoresis (CE). The small surface-to-volume ratio of the drop enables high enrichment factors to be obtained in a short time. One practical issue in SDME is how to keep the drop attached to the capillary stable. Here, we present novel but extremely simple in-tube microextraction (ITME) using the liquid inside the capillary as an acceptor phase, without forming a drop at the capillary tip. As a first example, ITME has been combined with headspace (HS) extraction. Simply by placing a capillary filled with a basic run buffer in the HS above an acidic donor solution, volatile acidic analytes were extracted into the acceptor phase in the capillary. After extraction, electrophoresis of the extracts in the capillary was carried out. Owing to the robust nature of the acceptor phase, the extraction temperature and time ranges of HS-ITME can be extended significantly, compared to HS-SDME. The enrichment factors for chlorophenols in a standard solution were up to 1100 under an optimal HS-ITME condition of 80°C for 15min and the limits of detections (LODs) obtained by monitoring the absorbance at 214nm were about 4nM. The whole procedures of HS-ITME-CE were carried out automatically using built-in programs of a commercial CE instrument.

Exploitation of surface acoustic waves to drive nanoparticle concentration within an electrification-dependent droplet

When SSAW propagates into microlitre droplets, two forces act on the particles. We obtain patterned particles by changing the DEP force.

Recent developments in capillary and microchip electroseparations of peptides (2011-2013)

The review presents a comprehensive survey of recent developments and applications of capillary and microchip electroseparation methods (zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography) for analysis, isolation, purification, and physicochemical and biochemical characterization of peptides. Advances in the investigation of electromigration properties of peptides, in the methodology of their analysis, including sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, as well as in detection of peptides, are presented. New developments in particular CE and CEC modes are reported and several types of their applications to peptide analysis are described: conventional qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC techniques to provide relevant physicochemical characteristics of peptides are demonstrated.

The potential of electrophoretic sample pretreatment techniques and new instrumentation for bioanalysis, with a focus on peptidomics and metabolomics

This Review highlights the potential of new electromigration-based sample pretreatment techniques for bioanalysis. Sample pretreatment is a challenging part of the analytical workflow, especially in the fields of peptidomics and metabolomics, where the analytes are very diverse, both in physicochemical properties and in endogenous concentration. Electromigration-based techniques have several strengths, such as fast selective analyte concentration and that complementary information on the content of a sample can be obtained when compared with more conventional (chromatography-based) techniques. In the past decade, various new electromigration-based sample pretreatment techniques have been developed, and importantly, new instrumental setups. In this Review, we provide an introduction on electromigration and its strengths. Then, selected examples of electromigration-based sample pretreatment techniques and instrumentation are discussed, namely free-flow electrophoresis, isoelectric focusing, isotachophoresis, electrodialysis, electromembrane extraction and electroextraction. Finally, the promising perspectives of electromigration-based sample pretreatment techniques are outlined.

Large-volume sample stacking for in vivo monitoring of trace levels of γ-aminobutyric acid, glycine and glutamate in microdialysates of periaqueductal gray matter by capillary electrophoresis with contactless conductivity detection

A new variant of large-volume sample stacking injection (LVSS) was used in the capillary electrophoresis with capacitively coupled contactless conductivity detection (CE/C(4)D) determination of the neurotransmitters γ-aminobutyric acid (GABA), glycine (Gly) and glutamate (Glu) in microdialysates of periaqueductal gray matter (PAG). The separation capillary was filled to 98% from the injection side with a sample of microdialysate in acetonitrile. Simultaneously with turning on the separation voltage, the sample zone was forced out by the background electrolyte by increasing the pressure in the terminal capillary outlet vessel. As a consequence of the stacking effect, the analyte was concentrated from the large sample volume into a narrow zone at the sample/background electrolyte boundary close to the injection end of the capillary. Under these conditions, LOD values of 9, 10 and 15nM were determined in the model samples for GABA, Gly and Glu, respectively; RSD equalled 0.5% for the migration times and 1.0-1.9% for the peak areas, respectively. In analysis of microdialysates of PAG, LOD values of 29, 29 and 37nM were determined for GABA, Gly and Glu, respectively; RSD equalled 0.5-0.7% for the migration times and 2.6-8.2% for the peak areas, respectively. The determined basal levels of the neurotransmitters in PAG microdialysates are 0.08, 4.7 and 0.8μM for GABA, Gly and Glu, respectively. Carrageenan-induced hyperalgesia increases the Gly and Glu levels and reduces GABA in PAG microdialysate. Peroral administration of paracetamol in hyperalgesia effectively reduces the Gly value and has no effect on Glu and GABA.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2010-2012)

CE has been alive for over two decades now, yet its sensitivity is still regarded as being inferior to that of more traditional methods of separation such as HPLC. As such, it is unsurprising that overcoming this issue still generates much scientific interest. This review continues to update this series of reviews, first published in Electrophoresis in 2007, with updates published in 2009 and 2011 and covers material published through to June 2012. It includes developments in the field of stacking, covering all methods from field amplified sample stacking and large volume sample stacking, through to isotachophoresis, dynamic pH junction and sweeping. Attention is also given to online or inline extraction methods that have been used for electrophoresis.