Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review

Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

Antimalarial analysis of pharmaceutical formulations and biological samples by capillary electrophoresis: the state of the art and applications

Malaria is a serious public health problem, being an endemic disease in 84 countries, mainly in Africa. This review explores the application of capillary electrophoresis (CE) techniques for analyzing antimalarial drugs, highlighting methods from 2000 to 2023 for the analysis of pharmaceutical formulations and human biological samples. The versatility, selectivity, high efficiency, cost-effectiveness, and high analytical frequency of CE techniques have become attractive choices for pharmaceutical analysis, focusing on quality control and impurity analysis applications. The evolution of achiral and chiral electromigration methods has been described based on the features of each mode of separation: capillary zone electrophoresis (CZE), micellar electrokinetic chromatography, microemulsion electrokinetic chromatography, and capillary electrochromatography. As expected, CZE is reported in most articles owing to its compatibility with drug properties and separation mode. However, it is necessary to perform other separation modes for a few drugs that are present in neutral form. After exhaustive research using different databases and statistical analyses, 27 articles using CE techniques for antimalarial drug analysis were found and are mentioned in this review.

Rapid enantiomeric separation of indacaterol by electrokinetic chromatography

The first chiral methodology enabling the separation of indacaterol enantiomers was developed in this work by cyclodextrin-electrokinetic chromatography. Indacaterol (IND) is a chiral drug marketed as a pure enantiomer. Then, the separation and quantification of each enantiomer is of great importance for the quality control of pharmaceutical formulations. After selecting the most suitable chiral selector and background electrolyte, two Box-Behnken designs were achieved to optimize the electrophoretic conditions using two different approaches to shorten analysis times: i) decreasing the capillary length, or ii) performing a short-end injection. Indacaterol enantiomers were separated in less than 5 min with a resolution value of 3.6 under the optimal separation conditions: 0.7% (m/v) carboxymethyl-α-cyclodextrin in 50 mM sodium formate buffer (pH 4.0) and using a short-end injection. Then, the analytical characteristics of the method were evaluated and LODs of 0.05 mg/L for S-IND and 0.04 mg/L for R-IND were achieved. Also, the method allowed the detection of a 0.1% enantiomeric impurity (S-IND) in the R-IND-based pharmaceutical formulations. The developed method was applied to the analysis of two pharmaceutical formulations. Percentages of 97 ± 3% and 103 ± 6% of R-IND with respect to the labeled amounts were found.

Simultaneous separation and analysis of multiple doxorubicin hydrochloride liposomes forms in serum by circular nonuniform electric field gel electrophoresis

BACKGROUND

Liposomal formulations have traditionally been considered the most therapeutically effective drug delivery systems (DDS). However, their pharmacokinetics study and efficacy assessment are still challenging given size heterogeneity and unknown forms in vivo. The pharmacodynamic evaluation that solely analyzes total drug concentration is unfit for the liposomal formulation study. Hence, it is crucial to develop effective strategies for the separation and analysis of different forms of liposomal formulations in order to contribute to the study of pharmacokinetic profiles associated with both liposome-incorporated and non-liposomal drugs. (84) RESULTS: A laboratory-built circular nonuniform electric field gel electrophoresis (CNEFGE) system was developed in this study for simultaneous separation and analysis of various forms of doxorubicin hydrochloride (DOX•HCl) liposomes. Liposomes were effectively fractionized based on their size and higher concentration in situ in the concentration zone, obtaining liposome recovery >95 % and a 3.04 concentration factor. It was found that the technique could be used to evaluate not only the size distribution of liposomes but also the drug loading capacity related to size. The charge-to-size-based separation mechanism has also allowed the simultaneous separation of liposome-entrapped drugs, protein-bound drugs, and free drugs in various forms, and the technique has been successfully employed in serum. Moreover, the quantification analysis of liposomes incubated with serum for 72 h showed that the proportion of the ratio of DOX•HCl in liposome-entrapped drugs, protein-bound drugs, and free drugs is approximately 97:2:1. (143) SIGNIFICANCE: Using the separation principle of gel electrophoresis and the electrification characteristics of drug carriers, this study developed and implemented an efficient approach for the simultaneous separation and concentration of multiple forms of drug liposomes in vivo. This approach offers a wide range of applications in the pharmacokinetics, efficacy, and safety evaluation of drug carriers and liposomes. (56).

Recent developments in capillary and microchip electroseparations of peptides (2021-mid-2023)

This review article brings a comprehensive survey of developments and applications of high-performance capillary and microchip electromigration methods (zone electrophoresis in a free solution or in sieving media, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, micropreparation, and physicochemical characterization of peptides in the period from 2021 up to ca. the middle of 2023. Progress in the study of electromigration properties of peptides and various aspects of their analysis, such as sample preparation, adsorption suppression, electroosmotic flow regulation, and detection, are presented. New developments in the particular capillary electromigration methods are demonstrated, and several types of their applications are reported. They cover qualitative and quantitative analysis of synthetic or isolated peptides and determination of peptides in complex biomatrices, peptide profiling of biofluids and tissues, and monitoring of chemical and enzymatic reactions and physicochemical changes of peptides. They include also amino acid and sequence analysis of peptides, peptide mapping of proteins, separation of stereoisomers of peptides, and their chiral analyses. In addition, micropreparative separations and physicochemical characterization of peptides and their interactions with other (bio)molecules by the above CE methods are described.

Applications of electrophoresis for small enantiomeric drugs in real-world samples: Recent trends and future perspectives

Separation and identification of chiral molecules is a topic widely discussed in the literature and of fundamental importance, especially in the pharmaceutical and food fields, both from industrial and laboratory points of view. Several techniques are used to carry out these analyses, but high-performance liquid chromatography is often the "gold standard." The high costs of chiral columns, necessary for this technique, led researchers to look for an alternative, and capillary electrophoresis (CE) is a technique capable of overcoming some of the disadvantages of liquid chromatography, often providing comparable results in terms of sensitivity and robustness. We addressed this topic, already widely discussed in the literature, providing an overview of the last 6 years of the most frequent and recent applications of CE. To make the manuscript more effective, we decided to divide it into paragraphs that represent the main field of application, from enantioseparation in complex matrices (pharmacokinetic studies or toxicological dosage of drugs, analysis of environmental pollutants, and analyses of foods) to quality control analyses on pharmaceutical formulas. About these, which are the fields of most meaningful use, we mentioned some of the most innovative and performing methods, with a look to the future on the application of new materials used, such as chiral selectors, that can make these types of analyses accessible to all, reducing cost, time, and excessive use of toxic solvents.

Application of the HPLC-ELSD technique for the determination of major metabolites of ibuprofen and creatinine in human urine

The report presents robust and high throughput methods, based on liquid chromatography coupled with evaporative light scattering detection (HPLC-ELSD), for the simultaneous determination of major metabolites of ibuprofen (IBU), namely 2-hydroxyibuprofen and carboxyibuprofen (method A) as well as creatinine (Crn) (method B) in human urine. The assays primarily involve straightforward sample purification. For both methods, the chromatographic separation of the analytes is achieved within 8 min at room temperature on Poroshell 120 SB-C18 (75 × 4.6 mm, 2.7 µm) column using gradient elution. The eluents consisted of 0.1% formic acid in water and acetonitrile (method A) or water and methanol (method B) delivered at a flow rate of 1 or 0.5 mL/min, respectively. In relation to metabolites of IBU, the assay linearity was observed within 0.06-0.5 g/L in urine, while the Crn assay linearity was demonstrated within 0.5-30 mmol/L in urine. The limit of quantification for IBU metabolites was determined to be 0.06 g/L, and 0.5 mmol/L for Crn. These methods were successfully applied to urine samples delivered by ten apparently healthy donors showing that the HPLC-ELSD assays are suitable for human urine screening.

Simultaneous Separation and Determination of Nine Active Ingredients in Sanyetangzhiqing by Cyclodextrin-Modified Micellar Electrokinetic Capillary Electrophoresis-Diode Array Detector

A simple and sensitive strategy using cyclodextrin-modified micellar electrokinetic chromatography with diode array detector was developed and applied for the simultaneous separation and determination of nine components in Sanyetangzhiqing (SYTZQ), a hypoglycemic and hypolipidemic agent. Several important parameters affecting separation performance were evaluated and optimized using single variable methods. Under the optimal conditions, baseline separation of the nine components, including four flavonoids (hyperoside, isoquercitrin, quercetin-3-O-glucuronoside, and astragalin), four phenolic acids (chlorogenic acid, rosmarinic acid, salvianolic acid B, and lithospermic acid), and a monoterpenoids (paeoniflorin), were achieved in less than 16 min. The correlation coefficients of the calibration curves were over 0.9996 for all the analytes. Intraday and interday precisions ranged from 0.4% to 4.8% and 1.7% to 5.0%, respectively. Recoveries of analytes varied from 95.3% to 105%. Validation results as well as the application to analyse SYTZQ samples demonstrated the applicability of the proposed method and thus provided an effective tool for the quality control of SYTZQ. Moreover, with the advantages of short time consuming, low energy consumption, high efficiency, and low cost, this method has laid a foundation for the determination and quality evaluation of multicomponents in Chinese herbal compounds.

Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-β-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21-26 mM phosphate-borate buffer pH 9.50-9.77; 65.0 mM sodium dodecyl sulfate; 0.25-1.29% v/v n-butanol; 21-26 mM dimethyl-β-cyclodextrin; temperature, 22 °C; voltage, 23-29 kV. The method was validated and applied to ampoules drug products.

Applications of Capillary Electrophoresis for the Determination of Cannabinoids in Different Matrices

Cannabinoids, terpenophenolic chemicals found only in cannabis, are primarily responsible for cannabis pharmacologic effects; nearly 150 distinct cannabinoids have been identified thus far. Among these, the main psychoactive molecule, tetrahydrocannabinol (THC), and the non-psychoactive counterpart, cannabidiol (CBD) are distinguishable. In the past decade, a CBD-containing pharmaceutical preparation was approved by Food and Drug Administration (FDA) for the treatment of drug-resistant epileptic seizures in children, and research trials for a variety of additional medical conditions for which CBD has been suggested as a therapy are being conducted. Additionally, the number of "CBD-containing" dietary supplements, largely available online, is increasing rapidly. Consequently, the necessity for the development of qualitative and quantitative methodologies for the analysis of the bioactive components of Cannabis is rising because of the increase in the production of therapeutic cannabis products. One of the analytical methods with good potential in cannabinoids analysis is capillary electrophoresis (CE). It has advantages related to high separation efficiency, relatively short analysis time, and the small consumption of analytes and reagents which generates relatively lower operational costs than other methods. This review focuses on the use of CE techniques to examine biological matrices and plant materials for the presence of cannabinoids and other bioactive compounds found in cannabis. The advantages, drawbacks, and applicability of the various electromigration approaches are also assessed. The article provides an overview of the "state of the art" and the latest trends in CE-based methods for the determination of cannabinoids.

Design of experiment techniques for the optimization of chromatographic analysis conditions: A review

Design of experiment (DoE) techniques have been widely used in the field of chromatographic parameters optimization as a valuable tool. A systematic literature review of the available DoE techniques applied to the development of a chromatographic analysis method is presented in this paper. First, the most common available designs and the implementation steps of DoE are comprehensively introduced. Then the studies in recent 10 years for the application of DoE techniques in various chromatographic techniques are discussed, such as capillary electrophoresis, liquid chromatography, gas chromatography, thin-layer chromatography, and high-speed countercurrent chromatography. Current problems and future outlooks are finally given to provide a certain inspiration of research in the application of DoE techniques to the different chromatographic techniques field. This review contributes to a better understanding of the DoE techniques for the efficient optimization of chromatographic analysis conditions, especially for the analysis of complex systems, such as multicomponent drugs and natural products.

Nanoflow Sheath Voltage-Free Interfacing of Capillary Electrophoresis and Mass Spectrometry for the Detection of Small Molecules

Coupling capillary electrophoresis (CE) to mass spectrometry (MS) is a powerful strategy to leverage a high separation efficiency with structural identification. Traditional CE-MS interfacing relies upon voltage to drive this process. Additionally, sheathless interfacing requires that the electrophoresis generates a sufficient volumetric flow to sustain the ionization process. Vibrating sharp-edge spray ionization (VSSI) is a new method to interface capillary electrophoresis to mass analyzers. In contrast to traditional interfacing, VSSI is voltage-free, making it straightforward for CE and MS. New nanoflow sheath CE-VSSI-MS is introduced in this work to reduce the reliance on the separation flow rate to facilitate the transfer of analyte to the MS. The nanoflow sheath VSSI spray ionization functions from 400 to 900 nL/min. Using the new nanoflow sheath reported here, volumetric flow rate through the separation capillary is less critical, allowing the use of a small (i.e., 20 to 25 μm) inner diameter separation capillary and enabling the use of higher separation voltages and faster analysis. Moreover, the use of a nanoflow sheath enables greater flexibility in the separation conditions. The nanoflow sheath is operated using aqueous solutions in the background electrolyte and in the sheath, demonstrating the separation can be performed under normal and reversed polarity in the presence or absence of electroosmotic flow. This includes the use of a wider pH range as well. The versatility of nanoflow sheath CE-VSSI-MS is demonstrated by separating cationic, anionic, and zwitterionic molecules under a variety of separation conditions. The detection sensitivity observed with nanoflow sheath CE-VSSI-MS is comparable to that obtained with sheathless CE-VSSI-MS as well as CE-MS separations with electrospray ionization interfacing. A bare fused silica capillary is used to separate cationic β-blockers with a near-neutral background electrolyte at concentrations ranging from 1.0 nM to 1.0 μM. Under acidic conditions, 13 amino acids are separated with normal polarity at a concentration ranging from 0.25 to 5 μM. Finally, separations of anionic compounds are demonstrated using reversed polarity under conditions of suppressed electroosmotic flow through the use of a semipermanent surface coating. With a near-neutral separation electrolyte, anionic nonsteroidal anti-inflammatory drugs are detected over a concentration range of 0.1 to 5.0 μM.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Simultaneous Separation and Analysis of Five Compounds in Cibotium barometz by Micellar Electrokinetic Chromatography with Large-Volume Sample Stacking

A large volume sample stacking (LVSS) method in micellar electrokinetic chromatography (MEKC) with diode array detector was developed for the simultaneous separation and analysis of five compounds: protocatechuic acid, protocatechuic aldehyde, caffeic acid, syringetin and vanillin in Cibotium barometz. The electrophoretic separation was performed in a 10 mM sodium dodecyl sulfate (SDS) and 50 mM sodium borax-sodium dihydrogen phosphate system (pH = 8.5) with 10% methanol at a separation voltage of 30 kV after optimizing the typical parameters. The detection limits were from 32 pg to 65 pg, which were around 12–27 times lower than MEKC, and 500 times less than reported methods. Finally, the established method was validated to be applicable for the determination of protocatechuic acid and caffeic acid in Cibotium barometz. This proposed method is expected to facilitate the quality control of Cibotium barometz.

Potential of microchip electrophoresis in pharmaceutical analysis: Development of a universal method for frequently prescribed nonsteroidal anti-inflammatory drugs

A novel microchip electrophoresis method with conductivity detection for the determination of nonsteroidal anti-inflammatory drugs (NSAIDs) in several pharmaceutical formulations was developed. The three frequently used NSAIDs - acetylsalicylic acid, diclofenac and ibuprofen were baseline separated on a poly(methyl methacrylate) microchip with coupled separation channels. Elimination of matrix components such as excipients, was realized through online combination of isotachophoresis (ITP) with zone electrophoresis (ZE). ITP-ZE hyphenation can also facilitate preconcentration of target analytes. ITP was carried out in the first separation channel at pH 6.5, while the second channel of the microchip was used for ZE separation and detection of the analytes at pH 7.0. The developed ITP-ZE method was demonstrated to be applicable for direct and reliable determination of NSAIDs in eleven pharmaceutical formulations. The noticeable advantage of this approach is that only simple sample pretreatment (filtration and dilution) is necessary. The method performance parameters, such as linearity (20-250% of nominal concentration of studied NSAIDs in the test samples), accuracy (98-102%) and precision (less than 2% RSD) were obtained. This universal approach is suitable for the determination of frequently used NSAIDs in a single analysis in less than 15 min. In addition to simple sample pretreatment, low running costs and minimal environmental impact could make this method attractive for the analysis of pharmaceutical preparations.

Rapid and simple CZE-UV method for quality control of B1 and B6 vitamins in drugs and dietary supplements

The application of hydrodynamically closed capillary zone electrophoresis combined with convenient ultraviolet (UV) detection allows fast, simple, environmentally friendly and cost-effective analysis of ions or ionisable molecules. This technique has been used to determine two selected B vitamins (thiamine, pyridoxine) in various drug formulations. The developed method was characterised by excellent validation parameters, such as linearity, precision, accuracy, limit of detection and limit of quantification. The total time of analysis was lower than 13.5 min. The results indicate that the method is suitable for implementation in routine quality control of selected B vitamins in pharmaceutical and food samples.

Capillary Electrophoresis Instruments for Medical Applications and Falsified Drug Analysis/Quality Control in Developing Countries

The implementation of integrated analytical techniques to meet stringent requirements in the life sciences requires a well-developed analytical capacity. New technology in analytical equipment for the analysis of large and small molecules is continuously being developed. However, developing countries frequently struggle to keep pace with technological advancements. Hence, it is of utmost importance to better invest in optimizing existing and proven methodologies to tackle life-saving challenges in developing countries. In this regard, capillary electrophoresis is a promising candidate for solving multiple analytical problems compared to its chromatographic and spectroscopic counterparts due to its fast analytical response time and notable cost efficiency. In the following, we summarize various issues and opportunities for capillary electrophoresis to be the technique of choice for the unresolved bottlenecks in analytical equipment in developing countries for drug quality control. This perspective demonstrates that the ongoing quest for the design of new, impactful analytical techniques is a dynamic and rapidly developing research area and mentions some directions and opportunities that have arisen during the recent pandemic.

The Use of Dual Cyclodextrin Chiral Selector Systems in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: An Overview

Cyclodextrin (CD) derivatives are the most efficient and frequently used chiral selectors (CSs) in capillary electrophoresis (CE). There are situations when the use of a single CD as CS is not enough to obtain efficient chiral discrimination of the enantiomers; in these cases, sometimes this problem can be resolved using a dual CD system. The use of dual CD systems can often dramatically enhance enantioseparation selectivity and can be applied for the separation of many analytes of pharmaceutical interest for which enantioseparation by CE with another CS systems can be problematic. Usually in a dual CD system an anionic CD is used together with a neutral one, but there are situations when the use of a cationic CD with a neutral one or the use of two neutral CDs or even two ionized CDs can be an efficient solution. In the current review we present general aspects of the use of dual CD systems in the analysis of pharmaceutical substances. Several examples of applications of the use of dual CD systems in the analysis of pharmaceuticals are selected and discussed. Theoretical aspects regarding the separation of enantiomers through simultaneous interaction with the two CSs are also explained. Finally, advantages, disadvantages, potential and new direction in this chiral analysis field are highlighted.

Application of capillary electrophoresis-nano-electrospray ionization-mass spectrometry for the determination of N-nitrosodimethylamine in pharmaceuticals

After a presence of highly hepatotoxic and potentially carcinogenic N-nitrosodimethylamine was detected in certain lots of sartan, ranitidine, metformin, and other pharmaceuticals, local regulatory authorities issued recalls of suspected products, and concerns of the pharmacotherapy safety were widely discussed. Since then, testing of a representative sample of each produced lot of these pharmaceuticals is required as a part of quality control processes. Hence, an interface-free CE-nanoESI system coupled with MS detection was employed for the development of a simple and economical method for quantitative detection of this contaminant in the valsartan drug substances and finished formulations used as model matrices. In this arrangement, a fused-silica capillary was used as both a separation column and a nanoESI emitter providing high ionization efficiency and sensitivity. The optimized procedure was found to have sufficient selectivity, linearity, accuracy, and precision. The established LOD and LOQ values were 0.3 and 1.0 ng/mL, respectively. The practical applicability of the method was tested by analyses of commercially available Valsacor^® tablets. The results obtained prove that the developed procedure represents a promising alternative to currently available GC- and LC-based methods. Furthermore, after an adjustment of the separation conditions, the CE-nanoESI/MS system can be conceptually used for the determination of NDMA in other suspected pharmaceuticals.