Production of Sophorolipids fromCandida bombicola ATCC 22214 Using Turkish Corn Oil and Honey

Efficient Biosynthesis of Acidic/Lactonic Sophorolipids and Their Application in the Remediation of Cyanobacterial Harmful Algal Blooms

Cyanobacterial harmful algal blooms (CyanoHABs) pose significant threats to human health and natural ecosystems worldwide, primarily caused by water eutrophication, increased surface water temperature, and co-occurring microorganisms. Urgent action is needed to develop an eco-friendly solution to effectively curb the proliferation of CyanoHABs. Sophorolipids (SLs) are fully biodegradable biosurfactants synthesized by Starmerella bombicola. They can be classified into lactone and acid types. The lactone type displays strong antimicrobial activity, while the acid type exhibits good solubility, which make them ideal agents for mitigating CyanoHABs. Nevertheless, the broad utilization of SLs are hindered by their expensive production costs and the absence of effective genetic editing tools in the native host. In this study, we constructed recombinant strains capable of producing either acidic or lactonic SLs using the CRISPR-Cas9 gene editing system. The yields of acidic and lactonic SLs reached 53.64 g/L and 45.32 g/L in a shaking flask, respectively. In a 5 L fermenter, acidic SLs reached 129.7 g/L using low-cost glucose and rapeseed oil as substrates. The addition of 5 mg/L lactonic SLs effectively degraded cyanobacteria within 30 min, and a ratio of 8.25:1.75 of lactonic to acidic SLs showed the highest degradation efficiency. This study offers a safe and promising solution for CyanoHABs treatment.

Sophorolipids: A comprehensive review on properties and applications

Sophorolipids are surface-active glycolipids produced by several non-pathogenic yeast species and are widely used as biosurfactants in several industrial applications. Sophorolipids provide a plethora of benefits over chemically synthesized surfactants for certain applications like bioremediation, oil recovery, and pharmaceuticals. They are, for instance less toxic, more benign and environment friendly in nature, biodegradable, freely adsorb to different surfaces, self-assembly in hydrated solutions, robustness for industrial applications etc. These miraculous properties result in valuable physicochemical attributes such as low critical micelle concentrations (CMCs), reduced interfacial surface tension, and capacity to dissolve non-polar components. Moreover, they exhibit a diverse range of physicochemical, functional, and biological attributes due to their unique molecular composition and structure. In this article, we highlight the physico-chemical properties of sophorolipids, how these properties are exploited by the human community for extensive benefits and the conditions which lead to their unique tailor-made structures and how they entail their interfacial behavior. Besides, we discuss the advantages and disadvantages associated with the use of these sophorolipids. We also review their physiological and functional attributes, along with their potential commercial applications, in real-world scenario. Biosurfactants are compared to their man-made equivalents to show the variations in structure-property correlations and possible benefits. Those attempting to manufacture purported natural or green surfactant with innovative and valuable qualities can benefit from an understanding of biosurfactant features structured along the same principles. The uniqueness of this review article is the detailed physico-chemical study of the sophorolipid biosurfactant and how these properties helps in their usage and detailed explicit study of their applications in the current scenario and also covering their pros and cons.

Optimization of the primary purification process of extracting sphorolipid from the fermentation broth to achieve a higher yield and purity

Sophorolipid (SL) is a surface-active glycolipid biosurfactant with promising industrial applications. It is synthesised by fermentation of hydrophobic and hydrophilic substrates using selected non-pathogenic yeasts. However, its applications are limited by high production costs and ineffective product recovery in downstream purification stages. Natural sophorolipids are produced in six to nine different hydrophobic sophorosides, where the carboxyl end of the fatty acid is either free, which is known as the acidic or open form, or it can be esterified internally to produce the lactonic form. The present study deals with the screening and selection of suitable solvents for the extraction of acidic and lactonic SL from fermentation broth. The optimisation study involves exhaustive extraction with the six different immiscible solvents ethyl acetate, butyl acetate, methylene dichloride, methyl tert.-butyl ether, methyl iso-butyl ketone and methyl ethyl ketone. The partition coefficient (Kd), which is the ratio of the solute concentration in the organic layer compared to the aqueous layer, determines the performance measurement of the extraction process in terms of yield and purity of the desired solute. The factors that influence exhaustive extraction were the broth to solvent ratio and the extraction stages. The optimal extraction conditions for the highest possible yield were a broth to solvent ratio of 1:1 and a number of extraction steps of 2. Methylene dichloride showed better results in terms of yield and selectivity in the extraction of acidic and lactonic SL from the fermentation broth compared to the other solvents investigated. For lactonic SL, the highest Kd value determined was 36.6 and for acidic SL the highest Kd value was 1.14.

Microbial surfactants: A journey from fundamentals to recent advances

Microbial surfactants are amphiphilic surface-active substances aid to reduce surface and interfacial tensions by accumulating between two fluid phases. They can be generically classified as low or high molecular weight biosurfactants based on their molecular weight, whilst overall chemical makeup determines whether they are neutral or anionic molecules. They demonstrate a variety of fundamental characteristics, including the lowering of surface tension, emulsification, adsorption, micelle formation, etc. Microbial genera like Bacillus spp., Pseudomonas spp., Candida spp., and Pseudozyma spp. are studied extensively for their production. The type of biosurfactant produced is reliant on the substrate utilized and the pathway pursued by the generating microorganisms. Some advantages of biosurfactants over synthetic surfactants comprise biodegradability, low toxicity, bioavailability, specificity of action, structural diversity, and effectiveness in harsh environments. Biosurfactants are physiologically crucial molecules for producing microorganisms which help the cells to grasp substrates in adverse conditions and also have antimicrobial, anti-adhesive, and antioxidant properties. Biosurfactants are in high demand as a potential product in industries like petroleum, cosmetics, detergents, agriculture, medicine, and food due to their beneficial properties. Biosurfactants are the significant natural biodegradable substances employed to replace the chemical surfactants on a global scale in order to make a cleaner and more sustainable environment.

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Majority of industries, in order to meet the technological development and consumer demands generate waste. The untreated waste spreads out toxic and harmful substances in the environment which serves as a breeding ground for pathogenic microorganisms thus causing severe health hazards. The three industrial sectors namely food, agriculture, and oil industry are among the primary organic waste producers that affect urban health and economic growth. Conventional treatment generates a significant amount of greenhouse gases which further contributes to global warming. Thus, the use of microbes for utilization of this waste, liberating CO₂ offers an indispensable tool. The simultaneous production of value-added products such as bioplastics, biofuels, and biosurfactants increases the economics of the process and contributes to environmental sustainability. This review comprehensively summarized the composition of organic waste generated from the food, agriculture, and oil industry. The linkages between global health hazards of industrial waste and environmental implications have been uncovered. Stare-of-the-art information on their subsequent utilization as a substrate to produce value-added products through bio-routes has been elaborated. The research gaps, economical perspective(s), and future research directions have been identified and discussed to strengthen environmental sustainability.

Sophorolipids bioproduction in the yeast Starmerella bombicola: Current trends and perspectives

Sophorolipids are highly active green surfactants (glycolipid biosurfactants) getting tremendous appreciation worldwide due to their low toxicity, biodegradability, broad spectrum of applications, and significant biotechnological potential. Sophorolipids are mainly produced by an oleaginous budding yeast Starmerella bombicola using low-cost substrates. Therefore, the recent state-of-art literature information about S. bombicola yeast is hereby provided, especially the underlying production pathways, biosynthetic gene cluster, and regulatory enzymes. Moreover, the S. bombicola offers flexibility for regulating the structural diversity of sophorolipids, either genetically or by varying fermentative conditions. The emergence of advanced technologies like 'Omics and CRISPR/Cas have certainly boosted rational engineering research for designing high-performing platform strains. Therefore, currently available genetic engineering tools in S. bombicola were reviewed, thereby opening up exciting new possibilities for improving the overall bioproduction titers, structural variability, and stability of sophorolipids. Finally, some technical perspectives to address the current challenges were discussed.

Review on classification, physicochemical properties and applications of microbial surfactants

Biosurfactants are amphiphilic microbial compounds synthesized from plants and micro organisms that have both hydrophilic and hydrophobic zones, which are classified into liquid-liquid, liquid-solid and liquid-gas interfaces. Due to their versatile nature, low toxicity, and high reactivity at extreme temperatures, as well as – extremely important – their good biodegradability and environmental compatibility, biobased surfactants provide approaches for use in many environmental industries. Biosurfactants produced by microorganisms have potential applications in bioremediation as well as in the petroleum, agricultural, food, cosmetics and pharmaceutical industries. In this review article, we include a detailed overview of the knowledge obtained over the years, such as factors influencing bio-surfactant production and developments in the incorporation of biomolecules in different industries and future research needs.

From bumblebee to bioeconomy: Recent developments and perspectives for sophorolipid biosynthesis

Sophorolipids are biobased compounds produced by the genera Starmerella and Pseudohyphozyma that gain exponential interest from academic and industrial stakeholders due to their mild and environmental friendly characteristics. Currently, industrially relevant sophorolipid volumetric productivities are reached up to 3.7 g∙L^-1∙h^-1 and sophorolipids are used in the personal care and cleaning industry at small scale. Moreover, applications in crop protection, food, biohydrometallurgy and medical fields are being extensively researched. The research and development of sophorolipids is at a crucial stage. Therefore, this work presents an overview of the state-of-the-art on sophorolipid research and their applications, while providing a critical assessment of scientific techniques and standardisation in reporting. In this review, the genuine sophorolipid producing organisms and the natural role of sophorolipids are discussed. Subsequently, an evaluation is made of innovations in production processes and the relevance of in-situ product recovery for process performance is discussed. Furthermore, a critical assessment of application research and its future perspectives are portrayed with a focus on the self-assembly of sophorolipid molecules. Following, genetic engineering strategies that affect the sophorolipid physiochemical properties are summarised. Finally, the impact of sophorolipids on the bioeconomy are uncovered, along with relevant future perspectives.

Advances in sophorolipid-producing strain performance improvement and fermentation optimization technology

Sophorolipids (SLs), currently one of the most promising biosurfactants, are secondary metabolites produced by many non-pathogenic yeasts, among which Candida bombicola ATCC 22214 is the main sophorolipid-producing strain. SLs have gained much attention since they exhibit anti-tumor, anti-bacterial, anti-inflammatory, and other beneficial biological activities. In addition, as biosurfactants, SLs have a low toxicity level and are easily degradable without polluting the environment. However, the production cost of SLs remains high, which hinders the industrialization process of SL production. This paper describes SL structure and the metabolic pathway of SL synthesis firstly. Furthermore, we analyze factors that contribute to the higher production cost of SLs and summarize current research status on the advancement of SL production based on two aspects: (1) the improvement of strain performance and (2) the optimization of fermentation process. Further prospects of lowering the cost of SL production are also discussed in order to achieve larger-scale SL production with a high yield at a low cost. KEY POINTS: • Review of advances in strain performance improvement and fermentation optimization. • High-throughput screening and metabolic engineering for high-performance strains. • Low-cost substrates and semi-continuous strategies for efficient SL production.

Remediation of Anthracene-Contaminated Soil with Sophorolipids-SDBS-Na2SiO3 and Treatment of Eluting Wastewater

The soil pollution of polycyclic aromatic hydrocarbons (PAHs) is serious in China, which not only affects the living and growing environment of plants and animals but also has a great impact on people’s health. The use of hydrophobic organic compounds to make use of surfactant ectopic elution processing is more convenient and cheaper as a repair scheme and can effectively wash out the polycyclic aromatic hydrocarbons in the soil. Therefore, we mixed sophorolipids:sodium dodecylbenzene sulfonate (SDBS):Na2SiO3 according to the mass ratio of 1:15:150. We explored the influencing factors of high and low concentrations of PAH-contaminated soil using a single factor test and four factors at a two-level factorial design. Then, the elution wastewater was treated by ultrasonic oxidation technology and the alkali-activated sodium persulfate technology. The results showed that: (1) In the single factor test, when the elution time is 8 h, the concentration of the compounded surfactant is 1200 mg/L, the particle size is 60 mesh, the concentration of NaCl is 100 mmol/L, and the concentration of KCl is 50 mmol/L, and the effect of the PAH-contaminated soil eluted by the composite surfactant is the best. Externally added NaCl and KCl salt ions have a more obvious promotion effect on the polycyclic aromatic hydrocarbon-contaminated soil; (2) in the interaction experiment, single factor B (elution time) and D (NaCl concentration) have a significant main effect. There is also a certain interaction between factor A (concentration agent concentration) and factor D, factor B, and factor C (KCl concentration); (3) the treatment of anthracene in the eluate by ultrasonic completely mineralizes the organic pollutants by the thermal and chemical effects produced by the ultrasonic cavitation phenomenon, so that the organic pollutants in the eluate are oxidized and degraded into simple environmentally friendly small molecular substances. When the optimal ultrasonic time is 60 min and the ratio of oxidant to activator is 1:2, the removal rate of contaminants in the eluent can reach 63.7%. At the same time, the turbidity of the eluent is significantly lower than that of the liquid after centrifugal separation, indicating that oxidants can not only remove the pollutants in elution water but also remove the residual soil particulate matter; and (4) by comparing the infrared spectrum of the eluted waste liquid before and after oxidation, it can be seen that during the oxidation process, the inner part of eluent waste liquid underwent a ring-opening reaction, and the ring-opening reaction also occurred in the part of the cyclic ester group of the surfactant, which changed from a ring to non-ring.

Remediation of Aviation Kerosene-Contaminated Soil by Sophorolipids from Candida bombicola CB 2107

Yeast-derived biosurfactants may substitute or complement chemical surfactants as green reagents to extract petroleum hydrocarbons from contaminated soil. The effectiveness of contaminant clean-up by sophorolipids was tested on kerosene-contaminated soil with reference to traditional synthetic surfactants. The sophorolipids produced by the yeast Candida bombicola CB 2107, cultivated with the carbon sources 10 g/L glucose and 10 g/L rapeseed oil, were most effective in contaminant removal. This biosurfactant revealed a critical micelle concentration of 108 mg/L which was close to that of Triton X-100 (103 mg/L), the synthetic surfactant considered as reference. It outperformed Triton X-100 in reducing kerosene concentrations (C10–C40) in contaminated soils. In a soil initially containing 1080 mg/kg of C10–C40, the concentration was reduced to 350 mg/kg using the biosurfactant, and to 670 mg/kg using Triton-X. In the soil with initial concentration of 472 mg/kg, concentrations were reduced to 285 and 300 mg/kg for biosurfactant and Triton X-100, respectively. Sophorolipids have the potential to replace synthetic surfactants. Properties and performance of the biosurfactants, however, strongly differ depending on the yeast and the growing conditions during production.

Biosurfactant: A new frontier for greener technology and environmental sustainability

Petroleum hydrocarbons, oil, heavy metals pollution is becoming additional severe problem due to the growing call for crude oil and crude oil products related products in several fields of application. Such pollution have fascinated much considerations and attractions as it leads to ecological damages in both marines, aquatic and terrestrial ecosystems. Thus, different techniques including chemical surfactants and complex technologies have been proposed for their clean up from the environment, which in turn has detrimental effects on the environment. As of late, biosurfactant compounds have added much deliberation since they are considered as a reasonable option and eco-accommodating materials for remediation technology. The present society is confronting a few difficulties of usage, authorizing ecological protection and environmental change for the next generations. Biosurfactants hold the special property of minimizing and reducing the interfacial tension of liquids. Such features endure biosurfactants to afford a major part in emulsification, de-emulsification, biodegradability, foam formation, washing performance, surface activity, and detergent formulation, which have potential applications in the diverse industrial set-up. Conversations on cost-effective technologies, renewable materials, novel synthesis, downstream, upstream, emerging characterization techniques, molecular, and genetical engineering are substantial to produce biosurfactant of quality and quantity. Therefore, greater attention is being paid to biosurfactant production by identifying their environmental, and biotechnological applications. Be that as it may, the extravagant cost drew in with biosurfactants biotechnological synthesis and recovery can hamper their application in those areas. Notwithstanding these costs, biosurfactants can be used as these parts shows outstandingly high benefits that can at present beat the expenses incurred in the initial purification and downstream processes. Biosurfactant production by microorganisms is relatively considered one of the crucial know-how for improvement, growth, advancement, and environmental sustainability of the 21st century. There is a developing conversation around environmental safety and the significant role that biosurfactants will progressively play soon, for instance, the use of renewable by-products as substrates, potential reduction, re-use and recycling of waste and waste products. The review confers the usefulness of biosurfactants in the removal of environmental contaminants and, consequently, expanding environmental safety and drive towards greener technology.

Lipid-Based Quaternary Ammonium Sophorolipid Amphiphiles with Antimicrobial and Transfection Activities

Twelve new quaternary ammonium sophorolipids with long alkyl chains on the nitrogen atom were synthesized starting from oleic and petroselinic acid-based sophorolipids. These novel derivatives were evaluated for their antimicrobial activity against selected Gram-negative and Gram-positive bacteria and their transfection efficacies on three different eukaryotic cell lines in vitro as good activities were demonstrated for previously synthesized derivatives. Self-assembly properties were also evaluated. All compounds proved to possess antimicrobial and transfection properties, and trends could be observed based on the length of the nitrogen substituent and the total length of the sophorolipid tail. Moreover, all long-chain quaternary ammonium sophorolipids form micelles, which proved to be a prerequisite to induce antimicrobial activity and transfection capacity. These results are promising for future healthcare applications of long-chained quaternary ammonium sophorolipids.

Application of Glycolipid Biosurfactants as Surface Modifiers in Bioplastics

Surface properties of cast films of poly(lactic acid) (PLA) containing 1 wt% of several glycolipid-type biosurfactants (BSs) were investigated. The wettability of PLA films containing a homologue of mannosylerythritol lipids (MEL-B), lactone-form sophorolipid (LSL), or cellobiose lipid (CL) was drastically higher than that of untreated PLA and several synthetic surfactants-containing PLA. Surface wettability was also dependent on the hydrophilicity of the substrate used during solvent casting of the PLA films. The wetting behavior of the opposing sides of MEL-B-containing films prepared on glass substrates differed significantly; the contact angle on the side of the film that had been in contact with the glass surface was significantly lower than that obtained on the side of the film that had been in contact with air. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis results showed that the MEL in MEL-B-containing thin PLA cast films was localized to a thin surface layer. These results suggest self-assembly of MEL-B and micro-phase separation between the PLA matrix and MEL-B domains. This resulted in the localization and orientation of MEL-B at the surface of the cast PLA film, which determined its specific wetting behavior.

Advances in the Study of Candida stellata

Candida stellata is an imperfect yeast of the genus Candida that belongs to the order Saccharomycetales, while phylum Ascomycota. C. stellata was isolated originally from a must overripe in Germany but is widespread in natural and artificial habitats. C. stellata is a yeast with a taxonomic history characterized by numerous changes; it is either a heterogeneous species or easily confused with other yeast species that colonize the same substrates. The strain DBVPG 3827, frequently used to investigate the oenological properties of C. stellata, was recently renamed as Starmerella bombicola, which can be easily confused with C. zemplinina or related species like C. lactis-condensi. Strains of C. stellata have been used in the processing of foods and feeds for thousands of years. This species, which is commonly isolated from grape must, has been found to be competitive and persistent in fermentation in both white and red wine in various wine regions of the world and tolerates a concentration of at least 9% (v/v) ethanol. Although these yeasts can produce spoilage, several studies have been conducted to characterize C. stellata for their ability to produce desirable metabolites for wine flavor, such as acetate esters, or for the presence of enzymatic activities that enhance wine aroma, such as β-glucosidase. This microorganism could also possess many interesting technological properties that could be applied in food processing. Exo and endoglucosidases and polygalactosidase of C. stellata are important in the degradation of β-glucans produced by Botrytis cinerea. In traditional balsamic vinegar production, C. stellata shapes the aromatic profile of traditional vinegar, producing ethanol from fructose and high concentrations of glycerol, succinic acid, ethyl acetate, and acetoin. Chemical characterization of exocellular polysaccharides produced by non-Saccharomyces yeasts revealed them to essentially be mannoproteins with high mannose contents, ranging from 73–74% for Starmerella bombicola. Numerous studies have clearly proven that these macromolecules make multiple positive contributions to wine quality. Recent studies on C. stellata strains in wines made by co-fermentation with Saccharomyces cerevisiae have found that the aroma attributes of the individual strains were apparent when the inoculation protocol permitted the growth and activity of both yeasts. The exploitation of the diversity of biochemical and sensory properties of non-Saccharomyces yeast could be of interest for obtaining new products.

Biomimetic Solid Lipid Nanoparticles of Sophorolipids Designed for Antileprosy Drugs

The objective of the present work was to develop solid lipid nanoparticles (SLNs) as drug-encapsulating structures by the solvent injection method. In this report, for the first time the inherent potential of lactonic sophorolipid (glycolipid) was exploited to formulate SLNs. A range of different Pluronic copolymers were screened by dynamic and static light scattering with the aim of obtaining most stable SLNs. To comprehend the structure of the SLNs, techniques such as transmission electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction were employed. A clear correlation between the type of Pluronic and size and stability of the SLNs could be drawn. The vector properties of the formed SLNs were assessed for both the encapsulated hydrophobic drugs-rifampicin and dapsone. To elucidate the transport mechanism of drug release, kinetic modeling was carried out on the drug release profiles. The promising results of sophorolipid-based SLNs have actually established a new arena beneath the significantly developed field of SLNs.

Sweet sorghum bagasse and corn stover serving as substrates for producing sophorolipids

To make the process of producing sophorolipids by Candida bombicola truly sustainable, we investigated production of these biosurfactants on biomass hydrolysates. This study revealed: (1) yield of sophorolipds on bagasse hydrolysate decreased from 0.56 to 0.54 and to 0.37 g/g carbon source when yellow grease was dosed at 10, 40 and 60 g/L, respectively. In the same order, concentration of sophorolipids was 35.9, 41.9, and 39.3 g/L; (2) under similar conditions, sophorolipid yield was 0.12, 0.05 and 0.04 g/g carbon source when corn stover hydrolysate was mixed with soybean oil at 10, 20 and 40 g/L. Sophorolipid concentration was 11.6, 4.9, and 3.9 g/L for the three oil doses from low to high; and (3) when corn stover hydrolysate and yellow grease served as the substrates for cultivating the yeast in a fermentor, sophorolipid concentration reached 52.1 g/L. Upon further optimization, sophorolipids production from ligocellulose will be indeed sustainable.

Sophorolipids production from rice straw via SO3 micro-thermal explosion by Wickerhamiella domercqiae var. sophorolipid CGMCC 1576

A novel lignocellulose material, holocellulose from rice straw via the pretreatment of SO3 micro-thermal explosion, was developed to produce sophorolipids (SLs) with Wickerhamiella domercqiae var. sophorolipid CGMCC 1576. The influence factors of inoculum dose, yeast extract concentration and pH regulators (chemical regents used for adjusting/influencing pH) was investigated and discussed. Results showed that W. domercqiae can grow in the rice straw holocellulose hydrolysate, and acquire relative high SL yield of 53.70 ± 2.61 g/L in shake flask culture. Inoculum dose, yeast extract concentration and pH regulator made obvious influence on fermentation parameters, especially on final broth pH and SLs production. Furthermore, there is a strong negative linear correlation existing between final broth pH and lactonic SL or ratio of lac SL/tot SL. Additionally, comparison between SL production and non-glucose carbon sources, culture methods, microbes in previous reports was carried out. These results will be benefit for acquiring SL mixture with suitable lac SL/tot SL ratio for specific purpose and scope economically.

Sophorolipids Production by Candida bombicola ATCC 22214 and its Potential Application in Microbial Enhanced Oil Recovery

Biosurfactant production using Candida bombicola ATCC 22214, its characterization and potential applications in enhancing oil recovery were studied at laboratory scale. The seed media and the production media were standardized for optimal growth and biosurfactant production. The production media were tested with different carbon sources: glucose (2%w/v) and corn oil (10%v/v) added separately or concurrently. The samples were collected at 24 h interval up to 120 h and checked for growth (OD660), and biosurfactant production [surface tension (ST) and interfacial tension (IFT)]. The medium with both glucose and corn oil gave better biosurfactant production and reduced both ST and IFT to 28.56 + 0.42mN/m and 2.13 + 0.09mN/m, respectively within 72 h. The produced biosurfactant was quite stable at 13-15% salinity, pH range of 2-12, and at temperature up to 100°C. It also produced stable emulsions (%E24) with different hydrocarbons (pentane, hexane, heptane, tridecane, tetradecane, hexadecane, 1-methylnaphthalene, 2,2,4,4,6,8-heptamethylnonane, light and heavy crude oil). The produced biosurfactant was extracted using ethyl acetate and characterized as a mixture of sophorolipids (SPLs). The potential of SPLs in enhancing oil recovery was tested using core-flooding experiments under reservoir conditions, where additional 27.27% of residual oil (Sor) was recovered. This confirmed the potential of SPLs for applications in microbial enhanced oil recovery.

Biosurfactants in cosmetics and biopharmaceuticals

Biosurfactants are surface-active biomolecules that are produced by various micro-organisms. They show unique properties i.e. lower toxicity, higher biodegradability and environmental compatibility compared to their chemical counterparts. Glycolipids and lipopeptides have prompted application in biotechnology and cosmetics due to their multi-functional profile i.e. detergency, emulsifying, foaming and skin hydrating properties. Additionally, some of them can be served as antimicrobials. In this study the current status of research and development on rhamnolipids, sophorolipids, mannosyloerythritol lipids, trehalipids, xylolipids and lipopeptides particularly their commercial application in cosmetics and biopharmaceuticals, is described.

Cost effective technologies and renewable substrates for biosurfactants' production

Diverse types of microbial surface active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant/bioemulsifier (BS/BE) as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of BS industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates, and fermentation technology in BS/BE production processes and their role in reducing the production cost.

Folding of outer membrane protein A in the anionic biosurfactant rhamnolipid

Folding and stability of bacterial outer membrane proteins (OMPs) are typically studied in vitro using model systems such as phospholipid vesicles or surfactant. OMP folding requires surfactant concentrations above the critical micelle concentration (cmc) and usually only occurs in neutral or zwitterionic surfactants, but not in anionic or cationic surfactants. Various Gram-negative bacteria produce the anionic biosurfactant rhamnolipid. Here we show that the OMP OmpA can be folded in rhamnolipid at concentrations above the cmc, though the thermal stability is reduced compared to the non-ionic surfactant dodecyl maltoside. We discuss implications for possible interactions between OMPs and biosurfactants in vivo.

Biosurfactant gene clusters in eukaryotes: regulation and biotechnological potential

Biosurfactants (BSs) are a class of secondary metabolites representing a wide variety of structures that can be produced from renewable feedstock by a wide variety of micro-organisms. They have (potential) applications in the medical world, personal care sector, mining processes, food industry, cosmetics, crop protection, pharmaceuticals, bio-remediation, household detergents, paper and pulp industry, textiles, paint industries, etc. Especially glycolipid BSs like sophorolipids (SLs), rhamnolipids (RLs), mannosylerythritol lipids (MELs) and cellobioselipids (CBLs) have been described to provide significant opportunities to (partially) replace chemical surfactants. The major two factors currently limiting the penetration of BSs into the market are firstly the limited structural variety and secondly the rather high production price linked with the productivity. One of the keys to resolve the above mentioned bottlenecks can be found in the genetic engineering of natural producers. This could not only result in more efficient (economical) recombinant producers, but also in a diversification of the spectrum of available BSs as such resolving both limiting factors at once. Unraveling the genetics behind the biosynthesis of these interesting biological compounds is indispensable for the tinkering, fine tuning and rearrangement of these biological pathways with the aim of obtaining higher yields and a more extensive structural variety. Therefore, this review focuses on recent developments in the investigation of the biosynthesis, genetics and regulation of some important members of the family of the eukaryotic glycolipid BSs (MELs, CBLs and SLs). Moreover, recent biotechnological achievements and the industrial potential of engineered strains are discussed.

Biosurfactants – Exotic Specialties or Ready for Application?

Surfactants are the most important ingredients in laundry detergents, hand dish washing liquids and shampoos. It is a major challenge for the industry today to identify alternative materials that are biodegradable, based on renewable resources and that show reasonable cost-performance effectiveness. Biosurfactants are an emerging class of surfactants produced by microorganisms in processes usually running at low temperatures and without large amounts of waste or by-products, therefore complying with the rules of green chemistry and potentially resulting in a lower carbon footprint than conventional surfactants.

We show in our work which biosurfactants can meet or even surpass conventional surfactants today when it comes to properties like interfacial tension reduction and wetting. Taking into account that further optimization and tailoring of materials, unique physicochemical properties and efficient production processes are within reach, the future perspectives for the broader use of biosurfactants are bright.

Enzymatic Synthesis of the Flavone Glucosides, Prunin and Isoquercetin, and the Aglycones, Naringenin and Quercetin, with Selective α-L-Rhamnosidase and β-D-Glucosidase Activities of Naringinase

The production of flavonoid glycosides by removing rhamnose from rutinosides can be accomplished through enzymatic catalysis. Naringinase is an enzyme complex, expressing both α-L-rhamnosidase and β-D-glucosidase activities, with application in glycosides hydrolysis. To produce monoglycosylated flavonoids with naringinase, the expression of β-D-glucosidase activity is not desirable leading to the need of expensive methods for α-L-rhamnosidase purification. Therefore, the main purpose of this study was the inactivation of β-D-glucosidase activity expressed by naringinase keeping α-L-rhamnosidase with a high retention activity. Response surface methodology (RSM) was used to evaluate the effects of temperature and pH on β-D-glucosidase inactivation. A selective inactivation of β-D-glucosidase activity of naringinase was achieved at 81.5°C and pH 3.9, keeping a very high residual activity of α-L-rhamnosidase (78%). This was a crucial achievement towards an easy and cheap production method of very expensive flavonoids, like prunin and isoquercetin starting from naringin and rutin, respectively.

Advances in utilization of renewable substrates for biosurfactant production

Biosurfactants are amphiphilic molecules that have both hydrophilic and hydrophobic moieties which partition preferentially at the interfaces such as liquid/liquid, gas/liquid or solid/liquid interfaces. Such characteristics enable emulsifying, foaming, detergency and dispersing properties. Their low toxicity and environmental friendly nature and the wide range of potential industrial applications in bioremediation, health care, oil and food processing industries makes them a highly sought after group of chemical compounds. Interest in them has also been encouraged because of the potential advantages they offer over their synthetic counterparts in many fields spanning environmental, food, biomedical, petrochemical and other industrial applications. Their large scale production and application however are currently restricted by the high cost of production and by the limited understanding of their interactions with cells and with the abiotic environment. In this paper, we review the current knowledge and latest advances in the search for cost effective renewable agro industrial alternative substrates for their production.