Bioanalytical application of surface- and tip-enhanced Raman spectroscopy

Portable point-of-care surface enhanced Raman scattering spectroscopy for the quantification of glutathione in whole blood microsamples

Glutathione (GSH) is a non-protein tripeptide thiol that plays a prominent role in oxidative stress defense. GSH concentration is particularly critical in the neonatal period, especially for premature newborns that face increased susceptibility to oxidative stress. Monitoring GSH levels provides valuable insights into newborn health, helping to tailor care to their specific needs. The aim of this study was the development of a sensor specifically targeted for its use in neonatology, enabling GSH determination in only 2 μL of whole blood. The newly developed sensing system simplifies sample processing, addressing a critical need in clinical applications. Unlike current methods that demand fast pre-processing of relatively large sample volumes, expensive equipment, and skilled personnel, the developed approach streamlines the analytical process. By using 2 μL of whole blood, a single syringe filter for sample treatment, a deuterated internal standard (IS) for signal normalization, and Surface Enhanced Raman Scattering (SERS) spectroscopy with a silver colloid substrate for GSH detection, the set-up's characteristics are compatible with point-of-care applications. The analytical procedure was validated and applied to diverse populations including healthy adults (N = 63) and newborns (N = 35), yielding GSH concentration values ranging from 0.6 to 1.8 and 0.8-2.1 mM, respectively. This new optical sensor offers a quick and cost-effective solution to support the assessment of GSH levels in newborns that can greatly benefit not only neonatal care, but also the study of adult populations for health monitoring.

Advancements in Chemical and Biosensors for Point-of-Care Detection of Acrylamide

Acrylamide (AA), an odorless and colorless organic small-molecule compound found generally in thermally processed foods, possesses potential carcinogenic, neurotoxic, reproductive, and developmental toxicity. Compared with conventional methods for AA detection, bio/chemical sensors have attracted much interest in recent years owing to their reliability, sensitivity, selectivity, convenience, and low cost. This paper provides a comprehensive review of bio/chemical sensors utilized for the detection of AA over the past decade. Specifically, the content is concluded and systematically organized from the perspective of the sensing mechanism, state of selectivity, linear range, detection limits, and robustness. Subsequently, an analysis of the strengths and limitations of diverse analytical technologies ensues, contributing to a thorough discussion about the potential developments in point-of-care (POC) for AA detection in thermally processed foods at the conclusion of this review.

SERS immuno- and apta-assays in biosensing/bio-detection: Performance comparison, clinical applications, challenges

Surface Enhanced Raman Spectroscopy is increasingly used as a sensitive bioanalytical tool for detection of variety of analytes ranging from viruses and bacteria to cancer biomarkers and toxins, etc. This comprehensive review describes principles of operation and compares the performance of immunoassays and aptamer assays with Surface Enhanced Raman scattering (SERS) detection to each other and to some other bioassay methods, including ELISA and fluorescence assays. Both immuno- and aptamer-based assays are categorized into assay on solid substrates, assays with magnetic nanoparticles and assays in laminar flow or/and strip assays. The best performing and recent examples of assays in each category are described in the text and illustrated in the figures. The average performance, particularly, limit of detection (LOD) for each of those methods reflected in 9 tables of the manuscript and average LODs are calculated and compared. We found out that, on average, there is some advantage in terms of LOD for SERS immunoassays (0.5 pM median LOD of 88 papers) vs SERS aptamer-based assays (1.7 pM median LOD of 51 papers). We also tabulated and analyzed the clinical performance of SERS immune and aptamer assays, where selectivity, specificity, and accuracy are reported, we summarized the best examples. We also reviewed challenges to SERS bioassay performance and real-life application, including non-specific protein binding, nanoparticle aggregation, limited nanotag stability, sometimes, relatively long time to results, etc. The proposed solutions to those challenges are also discussed in the review. Overall, this review may be interesting not only to bioanalytical chemist, but to medical and life science researchers who are interested in improvement of bioanalyte detection and diagnostics.

Live Cell Poration by Au Nanostars to Probe Intracellular Molecular Composition with SERS

A new type of flat substrate has been used to visualize structures inside living cells by surface-enhanced Raman scattering (SERS) and to study biochemical processes within cells. The SERS substrate is formed by stabilized aggregates of gold nanostars on a glass microscope slide coated with a layer of poly (4-vinyl pyridine) polymer. This type of SERS substrate provides good cell adhesion and viability. Au nanostars' long tips can penetrate the cell membrane, allowing it to receive the SERS signal from biomolecules inside a living cell. The proposed nanostructured surfaces were tested to study, label-free, the distribution of various biomolecules in cell compartments.

Application of centrifugal microfluidics in immunoassay, biochemical analysis and molecular diagnosis

Rapid diagnosis plays a vital role in daily life and is effective in reducing treatment costs and increasing curability, especially in remote areas with limited availability of resources. Among the various common methods of rapid diagnosis, centrifugal microfluidics has many unique advantages, such as less sample consumption, more precise valve control for sequential loading of samples, and accurately separated module design in a microfluidic network to minimize cross-contamination. Therefore, in recent years, centrifugal microfluidics has been extensively researched, and it has been found to play important roles in biology, chemistry, and medicine. Here, we review the latest developments in centrifugal microfluidic platforms in immunoassays, biochemical analyses, and molecular diagnosis, in recent years. In immunoassays, we focus on the application of enzyme-linked immunosorbent assay (ELISA); in biochemical analysis, we introduce the application of plasma and blood cell separation; and in molecular diagnosis, we highlight the application of nucleic acid amplification tests. Additionally, we discuss the characteristics of the methods under each platform as well as the enhancement of the corresponding performance parameters, such as the limit of detection, separation efficiency, etc. Finally, we discuss the limitations associated with the existing applications and potential breakthroughs that can be achieved in this field in the future.

Quantitative Label-Free Imaging of Lipid Domains in Single Bilayers by Hyperspectral Coherent Raman Scattering

Lipid phase separation in cellular membranes is thought to play an important role in many biological functions. This has prompted the development of synthetic membranes to study lipid-lipid interactions in vitro, alongside optical microscopy techniques aimed at directly visualizing phase partitioning. In this context, there is a need to overcome the limitations of fluorescence microscopy, where added fluorophores can significantly perturb lipid packing. Raman-based optical imaging is a promising analytical tool for label-free chemically specific microscopy of lipid bilayers. In this work, we demonstrate the application of hyperspectral coherent Raman scattering microscopy combined with a quantitative unsupervised data analysis methodology developed in-house to visualize lipid partitioning in single planar membrane bilayers exhibiting liquid-ordered and liquid-disordered domains. Two home-built instruments were utilized, featuring coherent anti-Stokes Raman scattering and stimulated Raman scattering modalities. Ternary mixtures of dioleoylphosphatidylcholine, sphingomyelin, and cholesterol were used to form phase-separated domains. We show that domains are consistently resolved, both chemically and spatially, in a completely label-free manner. Quantitative Raman susceptibility spectra of the domains are provided alongside their spatially resolved concentration maps.

Rapid, Quantitative, and Ultrasensitive Point-of-Care Testing: A Portable SERS Reader for Lateral Flow Assays in Clinical Chemistry

The design of a portable Raman/SERS-LFA reader with line illumination using a custom-made fiber optic probe for rapid, quantitative, and ultrasensitive point-of-care testing (POCT) is presented. The pregnancy hormone human chorionic gonadotropin (hCG) is detectable in clinical samples within only 2-5 s down to approximately 1.6 mIU mL-1 . This acquisition time is several orders of magnitude shorter than those of existing approaches requiring expensive Raman instrumentation, and the method is 15-times more sensitive than a commercially available lateral flow assay (LFA) as the gold standard. The SERS-LFA technology paves the way for affordable, quantitative, and ultrasensitive POCT with multiplexing potential in real-world applications, ranging from clinical chemistry to food and environmental analysis as well as drug and biowarfare agent testing.

Nanoparticles and intracellular applications of surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectrocopy (SERS) offers ultrasensitive vibrational fingerprinting at the nanoscale. Its non-destructive nature affords an ideal tool for interrogation of the intracellular environment, detecting the localisation of biomolecules, delivery and monitoring of therapeutics and for characterisation of complex cellular processes at the molecular level. Innovations in nanotechnology have produced a wide selection of novel, purpose-built plasmonic nanostructures capable of high SERS enhancement for intracellular probing while microfluidic technologies are being utilised to reproducibly synthesise nanoparticle (NP) probes at large scale and in high throughput. Sophisticated multivariate analysis techniques unlock the wealth of previously unattainable biomolecular information contained within large and multidimensional SERS datasets. Thus, with suitable combination of experimental techniques and analytics, SERS boasts enormous potential for cell based assays and to expand our understanding of the intracellular environment. In this review we trace the pathway to utilisation of nanomaterials for intracellular SERS. Thus we review and assess nanoparticle synthesis methods, their toxicity and cell interactions before presenting significant developments in intracellular SERS methodologies and how identified challenges can be addressed.

Point-of-care testing in the early diagnosis of acute pesticide intoxication: The example of paraquat

Acute pesticide intoxication is a common method of suicide globally. This article reviews current diagnostic methods and makes suggestions for future development. In the case of paraquat intoxication, it is characterized by multi-organ failure, causing substantial mortality and morbidity. Early diagnosis may save the life of a paraquat intoxication patient. Conventional paraquat intoxication diagnostic methods, such as symptom review and urine sodium dithionite assay, are time-consuming and impractical in resource-scarce areas where most intoxication cases occur. Several experimental and clinical studies have shown the potential of portable Surface Enhanced Raman Scattering (SERS), paper-based devices, and machine learning for paraquat intoxication diagnosis. Portable SERS and new SERS substrates maintain the sensitivity of SERS while being less costly and more convenient than conventional SERS. Paper-based devices provide the advantages of price and portability. Machine learning algorithms can be implemented as a mobile phone application and facilitate diagnosis in resource-limited areas. Although these methods have not yet met all features of an ideal diagnostic method, the combination and development of these methods offer much promise.

Hierarchically-Designed 3D Flower-Like Composite Nanostructures as an Ultrastable, Reproducible, and Sensitive SERS Substrate

Surface-enhanced Raman spectroscopy (SERS) is an attractive tool in the analytical sciences due to its high specificity and sensitivity. Because SERS-active substrates are only available as two-dimensional arrays, the fabrication of three-dimensional (3D) nanostructures allows for an increased number of hot spots in the focus volume, thus further amplifying the SERS signal. Although a great number of fabrication strategies for powerful SERS substrates exist, the generation of 3D nanostructures with high complexity and periodicity is still challenging. For this purpose, we report an easy fabrication technique for 3D nanostructures following a bottom-up preparation protocol. Enzymatically generated silver nanoparticles (EGNPs) are prepared, and the growth of hierarchically-designed 3D flower-like silica-silver composite nanostructures is induced by applying plasma-enhanced atomic layer deposition (PE-ALD) on the EGNPs. The morphology of these nanocomposites can be varied by changes in the PE-ALD cycle number, and a flower height of up to 10 μm is found. Moreover, the metallized (e.g., silver or gold) 3D nanostructures resulting from 135 PE-ALD cycles of silica creation provide highly reproducible SERS signals across the hydrophobic surface. Within this contribution, the morphological studies, optical properties, as well as the SERS response of these metallized silica-silver composite nanostructures applying vitamin B2 as a model analyte are introduced.

Detection of Pseudomonas aeruginosa Metabolite Pyocyanin in Water and Saliva by Employing the SERS Technique

Pyocyanin (PYO) is a metabolite specific for Pseudomonas aeruginosa. In the case of immunocompromised patients, it is currently considered a biomarker for life-threating Pseudomonas infections. In the frame of this study it is shown, that PYO can be detected in aqueous solution by employing surface-enhanced Raman spectroscopy (SERS) combined with a microfluidic platform. The achieved limit of detection is 0.5 μM. This is ~2 orders of magnitude below the concentration of PYO found in clinical samples. Furthermore, as proof of principle, the SERS detection of PYO in the saliva of three volunteers was also investigated. This body fluid can be collected in a non-invasive manner and is highly chemically complex, making the detection of the target molecule challenging. Nevertheless, PYO was successfully detected in two saliva samples down to 10 μM and in one sample at a concentration of 25 μM. This indicates that the molecules present in saliva do not inhibit the efficient adsorption of PYO on the surface of the employed SERS active substrates.

Controlled Veiling of Silver Nanocubes with Graphene Oxide for Improved Surface-Enhanced Raman Scattering Detection

Hybrid graphene oxide (GO)/metal nanocomposites have been recently proposed as novel surface-enhanced Raman scattering (SERS) substrates. Despite an increasing interest in these systems, standardization in their fabrication process is still lacking but urgently required to support their use for real-life applications. In this work we investigate how the assembly of GO should be conducted to control adsorption geometry and optical properties at the interface with plasmonic nanostructures as monolayer assemblies of silver nanocubes, by tuning main experimental parameters including GO concentration and self-assembly time. We finally identified the experimental conditions for building up a close-fitting soft dressing of the plasmonic surface, which shows optimal characteristics for flexible and reliable SERS detection.

Plasmonic nanostructures for surface enhanced spectroscopic methods

The development within the last five years in the field of surface enhanced spectroscopy methods was comprehensively reviewed.

Surface enhanced Raman spectroscopic direct determination of low molecular weight biothiols in umbilical cord whole blood

Biothiols are determined in whole blood samples by Surface Enhanced Raman Spectroscopy (SERS).

Design and fabrication of a microfluidic SERS chip with integrated Ag film@nanoAu

A “sandwich” microfluidic surface enhanced Raman scattering (SERS) chip with Ag film@nanoAu prepared in a microchannel was proposed and fabricated in situ. The detection limit for Rhodamine 6G was 10⁻⁸ M and the enhancement factor was 3.8 × 10⁵.

Raman spectroscopy towards clinical application: drug monitoring and pathogen identification

Raman spectroscopy is a label-free method that measures quickly and contactlessly, providing detailed information from the sample, and has proved to be an ideal tool for medical and life science research. In this review, recent advances of the technique towards drug monitoring and pathogen identification by the Jena Research Groups are reviewed. Surface-enhanced Raman spectroscopy (SERS) and ultraviolet resonance Raman spectroscopy in hollow-core optical fibres enable the detection of drugs at low concentrations as shown for the metabolites of the immunosuppressive drug 6-mercaptopurine as well as antimalarial agents. Furthermore, Raman spectroscopy can be used to characterise pathogenic bacteria in infectious diseases directly from body fluids, making time-consuming cultivation processes dispensable. Using the example of urinary tract infection, it is shown how bacteria can be identified from patients' urine samples within <1 h. The methods cover both single-cell analysis and dielectrophoretic capturing of bacteria in suspension. The latter method could also be used for fast (<3.5 h) identification of antibiotic resistance as shown exemplarily for vancomycin-resistant enterococci.

Vibrational spectroscopic methods for cytology and cellular research

The use of vibrational spectroscopy, FTIR and Raman, for cytology and cellular research has the potential to revolutionise the approach to cellular analysis. Vibrational spectroscopy is non-destructive, simple to operate and provides direct information. Importantly it does not require expensive exogenous labels that may affect the chemistry of the cell under analysis. In addition, the advent of spectroscopic microscopes provides the ability to image cells and acquire spectra with a subcellular resolution. This introductory review focuses on recent developments within this fast paced field and highlights potential for the future use of FTIR and Raman spectroscopy. We particularly focus on the development of live cell research and the new technologies and methodologies that have enabled this.

Sensing using plasmonic nanostructures and nanoparticles

Nanoparticles are widely used in various fields of science and technology as well as in everyday life. In particular, gold and silver nanoparticles display unique optical properties that render them extremely attractive for various applications. In this review, we focus on the use of noble metal nanoparticles as plasmonic nanosensors with extremely high sensitivity, even reaching single molecule detection. Sensors based on plasmon resonance shifts, as well as the use of surface-enhanced Raman scattering and surface-enhanced fluorescence, will be considered in this work.

Isolation and identification of bacteria by means of Raman spectroscopy

Bacterial detection is a highly topical research area, because various fields of application will benefit from the progress being made. Consequently, new and innovative strategies which enable the investigation of complex samples, like body fluids or food stuff, and improvements regarding the limit of detection are of general interest. Within this review the prospects of Raman spectroscopy as a reliable tool for identifying bacteria in complex samples are discussed. The main emphasis of this work is on important aspects of applying Raman spectroscopy for the detection of bacteria like sample preparation and the identification process. Several approaches for a Raman compatible isolation of bacterial cells have been developed and applied to different matrices. Here, an overview of the limitations and possibilities of these methods is provided. Furthermore, the utilization of Raman spectroscopy for diagnostic purposes, food safety and environmental issues is discussed under a critical view.

In situ microfluidic SERS assay for monitoring enzymatic breakdown of organophosphates

In this paper, we report on a method to probe the breakdown of the organophosphate (OP) simulants o,s-diethyl methyl phosphonothioate (OSDMP) and demeton S by the enzyme organophosphorous hydrolase (OPH) in a microfluidic device by surface enhanced Raman spectroscopy (SERS). SERS hotspots were formed on-demand inside the microfluidic device by laser-induced aggregation of injected Ag NPs suspensions. The Ag NP clusters, covering micron-sized areas, were formed within minutes using a conventional confocal Raman laser microscope. These Ag NP clusters were used to enhance the Raman spectra of the thiol products of OP breakdown in the microfluidic device: ethanethiol (EtSH) and (ethylsulfanyl) ethane-1-thiol (2-EET). When the OPH enzyme and its substrates OSDMP and demeton S were introduced, the thiolated breakdown products were generated, resulting in changes in the SERS spectra. With the ability to analyze reaction volumes as low as 20 nL, our approach demonstrates great potential for miniaturization of SERS analytical protocols.

A new calibration concept for a reproducible quantitative detection based on SERS measurements in a microfluidic device demonstrated on the model analyte adenine

This study demonstrates a new concept of calibrating surface enhanced Raman scattering (SERS) intensities without using additional substances as an internal standard and explores factors such as laser fluctuation and different Ag substrates, which affect the results of quantitative analyses based on SERS. To demonstrate the capabilities of the concept, the model analyte adenine has been chosen. A lab-on-a-chip device is applied for the measurements to guarantee consistent data recording. In order to simulate varied measuring conditions, two varying silver colloids (batch 1 and 2) are utilized as a SERS substrate and two different laser power levels (25 or 55 mW) are applied on the sample. A concentration gradient was generated which allows the use of the analyte itself for the correction of the resulting SERS spectra regarding intensity deviations caused by different ambient conditions. In doing so, a vast improvement in the quantification using SERS, especially in view of the comparability, reproducibility and repeatability, is demonstrated.

Towards high-throughput microfluidic Raman-activated cell sorting

Raman-activated cell sorting (RACS) is a promising single-cell analysis technology that is able to identify and isolate individual cells of targeted type, state or environment from an isogenic population or complex consortium of cells, in a label-free and non-invasive manner.

Nanoscale chemical imaging of Bacillus subtilis spores by combining tip-enhanced Raman scattering and advanced statistical tools

Tip-enhanced Raman Scattering (TERS) has recently emerged as a powerful spectroscopic technique capable of providing subdiffraction morphological and chemical information on samples. In this work, we apply TERS spectroscopy for surface analysis of the Bacillus subtilis spore, a very attractive biosystem for a wide range of applications regulated by the spore surface properties. The observed spectra reflect the complex and heterogeneous environment explored by the plasmonic tip, therefore exhibiting significant point-to-point variations at the nanoscale. Herein, we demonstrate that TERS data processing via principal component analysis allows handling such spectral changes, thus enabling an unbiased correlative imaging based on TERS. Our experimental outcomes suggest a denser arrangement of both proteins and carbohydrates on specific spore surface regions simultaneously revealed by AFM phase imaging. Successful TERS analysis of spores' surface is useful for bacterial surface-display systems and drug delivery applications.

The effect of silver thickness on the enhancement of polymer based SERS substrates

We investigated silver-covered polymer based nanogratings as substrates for surface-enhanced Raman spectroscopy (SERS), in particular with respect to the thickness of the plasmonically active silver film. In order to obtain accurate geometrical input data for the simulation process, we inspected cross sections of the gratings prepared by breaking at cryogenic temperature. We noticed a strong dependence of the simulation results on geometrical variations of the structures. Measurements revealed that an increasing silver film thickness on top of the nanogratings leads to a blue shift of the plasmonic resonance, as predicted by numerical simulations, as well as to an increased field enhancement for an excitation at 488 nm. We found a clear deviation of the experimental data compared to the simulated results for very thin silver films due to an island-like growth at a silver thickness below 20 nm. In order to investigate the SERS activity. we carried out measurements with crystal violet as a model analyte at an excitation wavelength of 488 nm. The SERS enhancement increases up to a silver thickness of about 30 nm, whereas it remains nearly constant for thicker silver films.

Analysis of the electrodeposition and surface chemistry of CdTe, CdSe, and CdS thin films through substrate-overlayer surface-enhanced Raman spectroscopy

The substrate-overlayer approach has been used to acquire surface enhanced Raman spectra (SERS) during and after electrochemical atomic layer deposition (ECALD) of CdSe, CdTe, and CdS thin films. The collected data suggest that SERS measurements performed with off-resonance (i.e. far from the surface plasmonic wavelength of the underlying SERS substrate) laser excitation do not introduce perturbations to the ECALD processes. Spectra acquired in this way afford rapid insight on the quality of the semiconductor film during the course of an ECALD process. For example, SERS data are used to highlight ECALD conditions that yield crystalline CdSe and CdS films. In contrast, SERS measurements with short wavelength laser excitation show evidence of photoelectrochemical effects that were not germane to the intended ECALD process. Using the semiconductor films prepared by ECALD, the substrate-overlayer SERS approach also affords analysis of semiconductor surface adsorbates. Specifically, Raman spectra of benzenethiol adsorbed onto CdSe, CdTe, and CdS films are detailed. Spectral shifts in the vibronic features of adsorbate bonding suggest subtle differences in substrate-adsorbate interactions, highlighting the sensitivity of this methodology.

Hyphenating atomic force microscopy

Atomic force microscopy can be readily combined with complementary instrumental techniques ranging from optical to mass-sensitive methods. This Feature highlights recent advances on hyphenated AFM technology, which enables localized studies and mapping of complementary information at surfaces and interfaces.

Surface-enhanced Raman spectroscopy of blood plasma and serum using Ag and Au nanoparticles: a systematic study

Surface-enhanced Raman spectroscopy (SERS) is a good candidate for the development of fast and easy-to-use diagnostic tools, possibly used on biofluids in point-of-care or screening tests. In particular, label-free SERS spectra of blood serum and plasma, two biofluids widely used in diagnostics, could be used as a metabolic fingerprinting approach for biomarker discovery. This study aims at a systematic evaluation of SERS spectra of blood serum and plasma, using various Ag and Au aqueous colloids, as SERS substrates, in combination with three excitation lasers of different wavelengths, ranging from the visible to the near-infrared. The analysis of the SERS spectra collected from 20 healthy subjects under a variety of experimental conditions revealed that intense and repeatable spectra are quickly obtained only if proteins are filtered out from samples, and an excitation in the near-infrared is used in combination with Ag colloids. Moreover, common plasma anticoagulants such as EDTA and citrate are found to interfere with SERS spectra; accordingly, filtered serum or heparin plasma are the samples of choice, having identical SERS spectra. Most bands observed in SERS spectra of these biofluids are assigned to uric acid, a metabolite whose blood concentration depends on factors such as sex, age, therapeutic treatments, and various pathological conditions, suggesting that, even when the right experimental conditions are chosen, great care must be taken in designing studies with the purpose of developing diagnostic tests.

The development of surface-enhanced Raman scattering as a detection modality for portable in vitro diagnostics: progress and challenges

This perspective provides an overview of the diverse surface-enhanced Raman scattering (SERS)-based sensor platforms that have been developed for in vitro diagnostic applications. To provide focus, protein and nucleic acid detection assays based on the principle of extrinsic SERS sensing are emphasized, as well as their potential for translation to fully integrated point-of-care (POC) test platforms. The development of intrinsic SERS sensors, which are predicated on the direct detection of analytes by laser excitation, entails unique opportunities and challenges deserving of their own attention. As the robust sensing of disease pathogens and cancers in both clinical facilities and limited resource settings is the targeted objective of many next-generation biosensors, the majority of the research progress summarized here centers on SERS sensors developed for the rapid, sensitive and selective detection of disease-causing pathogens and biomarkers. In our effort to communicate a realistic assessment of the progress that has been made and the challenges that lie ahead, we avoid an overtly optimistic appraisal of the current status of SERS diagnostics that does not tacitly acknowledge the difficulties inherent in aligning SERS-based technologies alongside ELISA and PCR technologies as a complementary method for bioanalyte detection possessing unique advantages.

Spectroscopic detection and quantification of heme and heme degradation products

Heme and heme degradation products play critical roles in numerous biological phenomena which until now have only been partially understood. One reason for this is the very low concentrations at which free heme, its complexes and the partly unstable degradation products occur in living cells. Therefore, powerful and specific detection methods are needed. In this contribution, the potential of nondestructive Raman spectroscopy for the detection, quantification and discrimination of heme and heme degradation products is investigated. Resonance Raman spectroscopy using different excitation wavelengths (413, 476, 532, and 752 nm) is employed to estimate the limit of detection for hemin, myoglobin, biliverdin, and bilirubin. Concentrations in the low micromolar range (down to 3 μmol/L) could be reliably detected when utilizing the resonance enhancement effect. Furthermore, a systematic study on the surface-enhanced Raman spectroscopy (SERS) detection of hemin in the presence of other cellular components, such as the highly similar cytochrome c, DNA, and the important antioxidant glutathione, is presented. A microfluidic device was used to reproducibly create a segmented flow of aqueous droplets and oil compartments. Those aqueous droplets acted as model chambers where the analytes have to compete for the colloid. With the help of statistical analysis, it was possible to detect and differentiate the pure substances as well as the binary mixtures and gain insights into their interaction.