The glycerin glut: Options for the value-added conversion of crude glycerol resulting from biodiesel production

Improving Glycerol Electrooxidation Performance on Nanocubic PtCo Catalysts

As glycerol (GLY) has emerged as a highly functional and cheap platform molecule and as an abundant biodiesel production byproduct, possible conversion methods have been investigated. One of the promising approaches is the glycerol electrooxidation (GEOR) on noble metal-based catalysts. Although noble metals, especially Pt, are generally very stable at different pH and highly selective toward three-carbon (C3) products, their electrocatalytic performance can be further improved by morphology tuning and alloying with non-noble metals like Co. In the present study, cubic PtxCo100-x (x = 100, 80, and 60) nanoparticles were investigated in an alkaline medium at 20 and 40 °C. The effect of the composition and reaction conditions on the selectivity of the GEOR toward C3 products like lactate and glycerate was studied, and the reaction mechanism was discussed. The highest mass activity was found for Pt80Co20, although when the specific activity, glycerol conversion, and GEOR selectivity were compared, Pt60Co40 was the superior catalyst overall. In general, all catalysts, even those that are Co-rich, exhibited a high C3 product selectivity up to 95% at 0.67 V vs RHE. The low applied potential of 0.67 V vs RHE at 40 °C facilitated lactate formation with selectivity up to 72%. At the same time, the glycerate formation with a selectivity of up to 40%, as well as C-C bond cleavage, was more favored at 0.87 V vs RHE.

Optimization of 1,3-propanediol production from fermentation of crude glycerol by immobilized Bacillus pumilus

This study investigates the application of crude glycerol to the production of 1,3-propanediol by immobilized cells of Bacillus pumilus. This is a novel application of a naturally occurring producer obtained from a wastewater storage pond in Thailand. Crude glycerol was obtained through the methanolysis of palm oil, which was catalyzed using rice bran lipase. Ten components of the fermentation medium were screened using a Plackett-Burman design. The statistical significance of the results was determined using multiple linear regression with a backward elimination approach. The significance level was set to 5 % (p < 0.05). Only crude glycerol, (NH4)2SO4, MgSO4, and CaCl2 significantly affected 1,3-propanediol production by immobilized B. pumilus. Furthermore, preliminary screenings of environmental conditions used for 1,3-propanediol production were conducted using a Plackett-Burman design. The results showed that the temperature, time, and quantity of immobilized cells were factors that significantly affected 1,3-propanediol yield. Therefore, the quantities of crude glycerol, (NH4)2SO4, MgSO4, and CaCl2 and the temperature, time, and quantity of immobilized cells were optimized using response surface methodology based on a Box-Behnken design. The model predicted a maximum 1,3-propanediol yield of 45.68 g/L with the following conditions: 60 g/L crude glycerol, 5 g/L (NH4)2SO4, 0.55 g/L MgSO4, 0.05 g/L CaCl2, a fermentation duration of 101 h, and a temperature of 25 °C, with 250 g of immobilized cells. The validation trials confirmed a production level of 44.12 ± 1.81 g/L, indicating a 2.86-fold production increase relative to the control group. Overall, this study demonstrates the potential of using crude glycerol as a substrate to improve the yields of 1,3-propanediol produced by B. pumilus.

Identification and characterization of a potential strain for the production of polyhydroxyalkanoate from glycerol

While poly (3-hydroxybutyrate) (PHB) holds promise as a bioplastic, its commercial utilization has been hampered by the high cost of raw materials. However, glycerol emerges as a viable feedstock for PHB production, offering a sustainable production approach and substantial cost reduction potential. Glycerol stands out as a promising feedstock for PHB production, offering a pathway toward sustainable manufacturing and considerable cost savings. The identification and characterization of strains capable of converting glycerol into PHB represent a pivotal strategy in advancing PHB production research. In this study, we isolated a strain, Ralstonia sp. RRA (RRA). The strain exhibits remarkable proficiency in synthesizing PHB from glycerol. With glycerol as the carbon source, RRA achieved a specific growth rate of 0.19 h-1, attaining a PHB content of approximately 50% within 30 h. Through third-generation genome and transcriptome sequencing, we elucidated the genome composition and identified a total of eight genes (glpR, glpD, glpS, glpT, glpP, glpQ, glpV, and glpK) involved in the glycerol metabolism pathway. Leveraging these findings, the strain RRA demonstrates significant promise in producing PHB from low-cost renewable carbon sources.

From waste management to circular economy: Leveraging thermophiles for sustainable growth and global resource optimization

Waste of any origin is one of the most serious global and man-made concerns of our day. It causes climate change, environmental degradation, and human health problems. Proper waste management practices, including waste reduction, safe handling, and appropriate treatment, are essential to mitigate these consequences. It is thus essential to implement effective waste management strategies that reduce waste at the source, promote recycling and reuse, and safely dispose of waste. Transitioning to a circular economy with policies involving governments, industries, and individuals is essential for sustainable growth and waste management. The review focuses on diverse kinds of environmental waste sources around the world, such as residential, industrial, commercial, municipal services, electronic wastes, wastewater sewerage, and agricultural wastes, and their challenges in efficiently valorizing them into useful products. It highlights the need for rational waste management, circularity, and sustainable growth, and the potential of a circular economy to address these challenges. The article has explored the role of thermophilic microbes in the bioremediation of waste. Thermophiles known for their thermostability and thermostable enzymes, have emerged to have diverse applications in biotechnology and various industrial processes. Several approaches have been explored to unlock the potential of thermophiles in achieving the objective of establishing a zero-carbon sustainable bio-economy and minimizing waste generation. Various thermophiles have demonstrated substantial potential in addressing different waste challenges. The review findings affirm that thermophilic microbes have emerged as pivotal and indispensable candidates for harnessing and valorizing a range of environmental wastes into valuable products, thereby fostering the bio-circular economy.

Production of arabitol from glycerol by immobilized cells of Wickerhamomyces anomalus WC 1501

Polyalcohols such as arabitol are among the main targets of biorefineries aiming to upcycle wastes and cheap substrates. In previous works Wickerhamomyces anomalus WC 1501 emerged as an excellent arabitol producer utilizing glycerol. Arabitol production by this strain is not growth associated, therefore, in this study, pre-grown cells were entrapped in calcium alginate beads (AB) and utilized for glycerol transformation to arabitol. Flasks experiments aimed to assess the medium composition (i.e., the concentration of inorganic and organic nitrogen sources and phosphates) and to establish the appropriate carrier-to-medium proportion. In flasks, under the best conditions of ammonium limitation and the carrier:medium ratio of 1:3 (w/v), 82.7 g/L glycerol were consumed in 168 h, yielding 31.2 g/L arabitol, with a conversion of 38% and volumetric productivity of 186 mg/mL/h. The process with immobilized cells was transferred to laboratory scale bioreactors with different configurations: stirred tank (STR), packed bed (PBR), fluidized bed (FBR), and airlift (ALR) bioreactors. The STR experienced oxygen limitation due to the need to maintain low stirring to preserve AB integrity and performed worse than flasks. Limitations in diffusion and mass transfer of oxygen and/or nutrients characterized also the PBR and the FBR and were partially relieved only in ALR, where 89.4 g/L glycerol were consumed in 168 h, yielding 38.1 g/L arabitol, with a conversion of 42% and volumetric productivity of 227 mg/mL/h. When the ALR was supplied with successive pulses of concentrated glycerol to replenish the glycerol as it was being consumed, 117 g/L arabitol were generated in 500 h, consuming a total of 285 g/L glycerol, with a 41% and 234 mg/L/h. The study strongly supports the potential of W. anomalus WC 1501 for efficient glycerol-to-arabitol conversion using immobilized cells. While the yeast shows promise by remaining viable and active for extended periods, further optimization is required, especially regarding mixing and oxygenation. Improving the stability of the immobilization process is also crucial for reusing pre-grown cells in multiple cycles, reducing dead times, biomass production costs, and enhancing the economic feasibility of the process.

Nanostructured Solid/Liquid Acid Catalysts for Glycerol Esterification: The Key to Convert Liability into Assets

Owing to the growing concerns about the dwindling fossil fuel reserves, increasing energy demand, and climate emergency, it is imperative to develop and deploy sustainable energy technologies to ensure future energy supply and to transition to the net-zero world. In this context, there is great potential in the biorefinery concept for supplying drop in biofuels in the form of biodiesel. Biodiesel as a fuel can certainly bridge the gap where electrification or the use of hydrogen is not feasible, for instance, in heavy vehicles and in the farm and marine transportation sectors. However, the biodiesel industry also generates a large amount of crude glycerol as the by-product. Due to the presence of several impurities, crude glycerol may not be a suitable feedstock for all high-value products derived from glycerol, but it fits well with glycerol esterification for producing glycerol acetins, which have numerous applications. This review critically looks at the processes using nanostructured solid/liquid acid catalysts for glycerol esterification, including the economic viability of the scale-up. The homogeneous catalysts reviewed herein include mineral acids and Brønsted acidic ionic liquids, such as SO3H-functionalized and heteropoly acid based ionic liquids. The heterogeneous catalysts reviewed herein include solid acid catalysts such as metal oxides, ion-exchange resins, zeolites, and supported heteropoly acid-based catalysts. Furthermore, the techno-economic analysis studies have shown the process to be highly profitable, confirming the viability of glycerol esterification as a potential tool for economic value addition to the biorefinery industry.

Effects of Assisting Solvents on Purification Efficiency in the Layer Melt Crystallization of Glycerol

The efficiency of layer melt crystallization for the selective separation of glycerol from a glycerol-diethylene glycol mixture containing 4 wt % of diethylene glycol was evaluated using solvent-free and solvent-aided approaches. The effect of 1-butanol and the binary solvent of 1-butanol and acetone with a total molar composition of 25 mol % on the crystal growth kinetics and the purity of the final product was studied at different undercooling degrees and crystallization yields. The melting point temperature of the mixtures was predicted by using the modified UNIFAC Dortmund model. The addition of both a single and binary solvents significantly increased the crystal growth rate and purity of the final product compared to crystallization from the solvent-free mixture. Additionally, higher crystal growth rates and product purity were observed in the binary solvent system compared to those in the single solvent system at the same degree of undercooling. The second stage of solvent-aided crystallization resulted in glycerol with a purity above 99.5 wt %, depending on the type of solvent used and the rate of crystal growth.

A systematic review on utilization of biodiesel-derived crude glycerol in sustainable polymers preparation

With the rapid development of biodiesel, biodiesel-derived glycerol has become a promising renewable bioresource. The key to utilizing this bioresource lies in the value-added conversion of crude glycerol. While purifying crude glycerol into a pure form allows for diverse applications, the intricate nature of this process renders it costly and environmentally stressful. Consequently, technology facilitating the direct utilization of unpurified crude glycerol holds significant importance. It has been reported that crude glycerol can be bio-transformed or chemically converted into high-value polymers. These technologies provide cost-effective alternatives for polymer production while contributing to a more sustainable biodiesel industry. This review article describes the global production and quality characteristics of biodiesel-derived glycerol and investigates the influencing factors and treatment of the composition of crude glycerol including water, methanol, soap, matter organic non-glycerol, and ash. Additionally, this review also focused on the advantages and challenges of various technologies for converting crude glycerol into polymers, considering factors such as the compatibility of crude glycerol and the control of unfavorable factors. Lastly, the application prospect and value of crude glycerol conversion were discussed from the aspects of economy and environmental protection. The development of new technologies for the increased use of crude glycerol as a renewable feedstock for polymer production will be facilitated by the findings of this review, while promoting mass market applications.

Type I CRISPR-Cas-mediated microbial gene editing and regulation

There are six major types of CRISPR-Cas systems that provide adaptive immunity in bacteria and archaea against invasive genetic elements. The discovery of CRISPR-Cas systems has revolutionized the field of genetics in many organisms. In the past few years, exploitations of the most abundant class 1 type I CRISPR-Cas systems have revealed their great potential and distinct advantages to achieve gene editing and regulation in diverse microorganisms in spite of their complicated structures. The widespread and diversified type I CRISPR-Cas systems are becoming increasingly attractive for the development of new biotechnological tools, especially in genetically recalcitrant microbial strains. In this review article, we comprehensively summarize recent advancements in microbial gene editing and regulation by utilizing type I CRISPR-Cas systems. Importantly, to expand the microbial host range of type I CRISPR-Cas-based applications, these structurally complicated systems have been improved as transferable gene-editing tools with efficient delivery methods for stable expression of CRISPR-Cas elements, as well as convenient gene-regulation tools with the prevention of DNA cleavage by obviating deletion or mutation of the Cas3 nuclease. We envision that type I CRISPR-Cas systems will largely expand the biotechnological toolbox for microbes with medical, environmental and industrial importance.

Kinetic Analysis of Glycerol Esterification Using Tin Exchanged Tungstophosphoric Acid on K-10

Glycerol acetins (mono-, di-, and tri) are produced via esterification with acetic acid. The acetins are commercially important industrial chemicals including their application as fuel additives, thus significant to environmental sustainability and economic viability of the biorefinery industry. Glycerol esterification with acetic acid was studied using partial tin exchanged tungstophosphoric acid supported on montmorillonite K-10 as catalysts. Partially exchanging the H+ ion of DTP with Sn (x = 1) increased the acidity of the catalyst and showed an increase in the catalytic activity as compared to the DTP/K-10 catalyst. A series of tin exchanged tungstophosphoric acid (20% w/w) supported on montmorillonite K-10 clay (Snx-DTP/K-10, where x = 0.5-1.5) were synthesized and thoroughly characterized by using BET, XRD, FT-IR, UV-vis, and titration techniques. Among various catalysts, Sn1-DTP/K-10 was found to be the most active catalyst for glycerol esterification. Effects of different reaction parameters were studied and optimized to get high yields of glycerol triacetin. A suitable kinetic model of the reaction was fitted, and the Langmuir-Hinshelwood (L-H) dual-site model was able to describe the experimental data with high agreement between the experimental and calculated results. The prepared catalyst could be recycled at least four times without significant loss of activity. The overall process is green and environment friendly.

Structural characterization of the type I-B CRISPR Cas7 from Thermobaculum terrenum

Clustered regularly interspaced short palindromic repeats (CRISPR) in many prokaryotes functions as an adaptive immune system against mobile genetic elements. A heterologous ribonucleoprotein silencing complex composed of CRISPR-associated (Cas) proteins and a CRISPR RNA (crRNA) neutralizes the incoming mobile genetic elements. The type I and III silencing complexes commonly include a protein-helical backbone of several copies of identical subunits, for example, Cas7 in the type I silencing complex. In this study, we structurally characterized type I-B Cas7 (Csh2 from Thermobaculum terrenum; TterCsh2). The revealed crystal structure of TterCsh2 shows a typical glove-like architecture of Cas7, which consists of a palm, a thumb, and a finger domain. Csh2 proteins have 5 conserved sequence motifs that are arranged to form a presumable crRNA-binding site in the TterCsh2 structure. This crRNA binding site of TterCsh2 is structurally and potentially comparable to those observed in helix-forming Cas7 structures in other sub-types. Analysis of the reported Cas7 structures and their sequences suggests that Cas7s can be divided into at least two sub-classes. These data will broaden our understanding on the Cascade complex of CRISPR/Cas systems.

Metabolic Engineering of Microorganisms to Produce Pyruvate and Derived Compounds

Pyruvate is a hub of various endogenous metabolic pathways, including glycolysis, TCA cycle, amino acid, and fatty acid biosynthesis. It has also been used as a precursor for pyruvate-derived compounds such as acetoin, 2,3-butanediol (2,3-BD), butanol, butyrate, and L-alanine biosynthesis. Pyruvate and derivatives are widely utilized in food, pharmaceuticals, pesticides, feed additives, and bioenergy industries. However, compounds such as pyruvate, acetoin, and butanol are often chemically synthesized from fossil feedstocks, resulting in declining fossil fuels and increasing environmental pollution. Metabolic engineering is a powerful tool for producing eco-friendly chemicals from renewable biomass resources through microbial fermentation. Here, we review and systematically summarize recent advances in the biosynthesis pathways, regulatory mechanisms, and metabolic engineering strategies for pyruvate and derivatives. Furthermore, the establishment of sustainable industrial synthesis platforms based on alternative substrates and new tools to produce these compounds is elaborated. Finally, we discuss the potential difficulties in the current metabolic engineering of pyruvate and derivatives and promising strategies for constructing efficient producers.

A concise review of glycerol derivatives for use as fuel additives

Due to renewable fuel mandates worldwide, the increase in biodiesel production has caused an oversupply of low-cost glycerol on the markets, which can negatively affect the sustainability of the biodiesel industry as a whole. In order to avoid that scenario, the transformation of glycerol into value-added products has been investigated, and the production of additives for internal combustion engine fuels is one good example of glycerol valorization. The present work presents a summary of the literature describing the most important chemical pathways through which glycerol can be converted into fuel additives, to be subsequently mixed with either gasoline, biodiesel, or diesel fuel. The focus is on the three major categories, namely glycerol acetals/ketals, ethers, and esters (acetates). Moreover, the effectiveness of the different glycerol-derived compounds is illustrated through several examples from the literature. Finally, a few research gaps on the topic are identified and suggestions for future work are described.

Recovery and utilization of crude glycerol, a biodiesel byproduct

Biodiesel production has increased significantly in the past decade because it has been demonstrated to be a viable alternative and renewable fuel. Consequently, the production of crude glycerol, the main byproduct of the transesterification of lipids to biodiesel, has risen as well. Therefore, the effective recovery and utilization of crude glycerol can provide biodiesel with additional value. In this review, we first summarized the state-of-the-art progress on crude glycerol recovery and purification. Subsequently, numerous approaches have been reviewed for the utilization of crude glycerol, including use as animal feeds, for combustion, anaerobic fermentation, and chemical conversion. Finally, an extensive discussion and outlook is presented in relation to the techniques and processes in the chemical conversion of crude glycerol.

The microbial production of kynurenic acid using Yarrowia lipolytica yeast growing on crude glycerol and soybean molasses

Yarrowia lipolytica yeast are able to produce kynurenic acid—a very valuable compound acting as a neuroprotective and antioxidant agent in humans. The recent data proved the existence of the kynurenine biosynthesis pathway in this yeast cells. Due to this fact, the aim of this work was to enhance kynurenic acid production using crude glycerol and soybean molasses as cheap and renewable carbon and nitrogen sources. The obtained results showed that Y. lipolytica GUT1 mutants are able to produce kynurenic acid in higher concentrations (from 4.5 mg dm⁻³ to 14.1 mg dm⁻³) than the parental strain (3.6 mg dm⁻³) in the supernatant in a medium with crude glycerol. Moreover, the addition of soybean molasses increased kynurenic acid production by using wild type and transformant strains. The A-101.1.31 GUT1/1 mutant strain produced 17.7 mg dm⁻³ of kynurenic acid in the supernatant during 150 h of the process and 576.7 mg kg⁻¹ of kynurenic acid in dry yeast biomass. The presented work proves the great potential of microbial kynurenic acid production using waste feedstock. Yeast biomass obtained in this work is rich in protein, with a low content of lipid, and can be a healthy ingredient of animal and human diet.

Closing the Carbon Loop in the Circular Plastics Economy

Today, plastics are ubiquitous in everyday life, problem solvers of modern technologies, and crucial for sustainable development. Yet the surge in global demand for plastics of the growing world population has triggered a tidal wave of plastic debris in the environment. Moving from a linear to a zero-waste and carbon-neutral circular plastic economy is vital for the future of the planet. Taming the plastic waste flood requires closing the carbon loop through plastic reuse, mechanical and molecular recycling, carbon capture, and use of the greenhouse gas carbon dioxide. In the quest for eco-friendly products, plastics do not need to be reinvented but tuned for reuse and recycling. Their full potential must be exploited regarding energy, resource, and eco efficiency, waste prevention, circular economy, climate change mitigation, and lowering environmental pollution. Biodegradation holds promise for composting and bio-feedstock recovery, but it is neither the Holy Grail of circular plastics economy nor a panacea for plastic littering. As an alternative to mechanical downcycling, molecular recycling enables both closed-loop recovery of virgin plastics and open-loop valorization, producing hydrogen, fuels, refinery feeds, lubricants, chemicals, and carbonaceous materials. Closing the carbon loop does not create a Perpetuum Mobile and requires renewable energy to achieve sustainability. This article is protected by copyright. All rights reserved.

Investigating and modelling the effect of light intensity on Rhodopseudomonas palustris growth

Photosynthetic bacteria can be useful biotechnological tools - they produce a variety of valuable products, including high purity hydrogen, and can simultaneously treat recalcitrant wastewaters. However, while photobioreactors have been designed and modelled for photosynthetic algae and cyanobacteria, there has been less work on understanding the effect of light in photosynthetic bacterial fermentations. In order to design photobioreactors, and processes using these organisms, robust models of light penetration, utilisation and conversion are needed. This article uses experimental data from a tubular photobioreactor designed to focus in on light intensity effects, to model the effect of light intensity on the growth of Rhodopseudomonas palustris, a model photosynthetic bacterium. The work demonstrates that growth is controlled by light intensity, and that this organism does experience photolimitation below 200 W/m2 and photoinhibition above 600 W/m2. This has implications for outdoor applications, as there will be low growth during the periods of limited light, and growth may be inhibited during the light intensive hours of mid-day. Further, the work presents a model for light penetration in cylindrical photobioreactors, which tends to be the most common geometry. The model developed showed good fit to the experimental data for each light intensity investigated, with high R2 values and NRMSE values all below 20%. The work extends the modelling tools for these organisms, and will allow for better photobioreactor design, and the integration of modelling tools in designing processes which use photosynthetic bacteria. This article is protected by copyright. All rights reserved.

High value-added products derived from crude glycerol via microbial fermentation using Yarrowia clade yeast

BACKGROUND

Contemporary biotechnology focuses on many problems related to the functioning of developed societies. Many of these problems are related to health, especially with the rapidly rising numbers of people suffering from civilization diseases, such as obesity or diabetes. One factor contributing to the development of these diseases is the high consumption of sucrose. A very promising substitute for this sugar has emerged: the polyhydroxy alcohols, characterized by low caloric value and sufficient sweetness to replace table sugar in food production.

RESULTS

In the current study, yeast belonging to the Yarrowia clade were tested for erythritol, mannitol and arabitol production using crude glycerol from the biodiesel and soap industries as carbon sources. Out of the 13 tested species, Yarrowia divulgata and Candida oslonensis turned out to be particularly efficient polyol producers. Both species produced large amounts of these compounds from both soap-derived glycerol (59.8-62.7 g dm-3) and biodiesel-derived glycerol (76.8-79.5 g dm-3). However, it is equally important that the protein and lipid content of the biomass (around 30% protein and 12% lipid) obtained after the processes is high enough to use this yeast in the production of animal feed.

CONCLUSIONS

The use of waste glycerol for the production of polyols as well as utilization of the biomass obtained after the process for the production of feed are part of the development of modern waste-free technologies.

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

The effect of dietary inclusion of crude glycerin on performance, ruminal fermentation, meat quality and fatty acid profile of beef cattle: Meta-analysis

This meta-analysis was carried to evaluate the effect of the use of crude glycerin in diets for beef cattle on the ruminal fermentation, animal performance, physical and chemical characteristics, and fatty acid profile of meat through meta-analysis. Data from forty-eight peer-reviewed publications with 170 treatments means was included in the data set. The effect glycerin in diet were evaluated by examining the weighted mean differences (WMD) between glycerin treatment (diets with crude glycerin) and control diet (without crude glycerin). Heterogeneity was explored by meta-regression and subgroup analysis using genetic type, treatment period, crude glycerin in the diet (g/kg DM), feed systems (pasture or total mixed ration), and concentrate in the diet (g/kg DM). The inclusion of crude glycerin had no effect on the average daily gain, but increased feed efficiency by 3.15% while reducing subcutaneous fat thickness by 3.13%. Inclusion of crude glycerin reduced meat cholesterol by 9.13%, and total saturated fatty acids by 1.05%, and increased total unsaturated (2.02%), monounsaturated (3.17%) fatty acids. However, it did not affect the concentrations of conjugated linoleic acid and omega-3. Crude glycerin inclusions up to 200 g/kg DM did not promote a negative effect on animal performance, carcass and physical-chemical characteristics of meat, and supported an increase in total monounsaturated (1.73%), oleic acid (12.29 mg) and palmitoleic acid (1.24 mg), while reducing myristic acid (3.08 mg), stearic acid (12.00 mg) in beef cattle meat.

A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway

Over the past decades, research efforts are being devoted into utilizing the biomass waste as a major source of green energy to maintain the economic, environmental, and social sustainability. Specifically, there is an emerging consensus on the significance of glycerol (an underutilised waste from biodiesel industry) as a cheap, non-toxic, and renewable source for valuable chemicals synthesis. There are numerous methods enacted to convert this glycerol waste to tartronic acid, mesoxalic acid, glyceraldehyde, dihydroxyacetone, oxalic acid and so on. Among these, the green electro-oxidation technique is one of the techniques that possesses potential for industrial application due to advantages such as non-toxicity process, fast response, and lower energy consumption. The current review covers the general understanding on commonly used techniques for alcohol (C₁ & C₂) conversion, with a specific insight on glycerol (C₃) electro-oxidation (GOR). Since catalysts are the backbone of chemical reaction, they are responsible for the overall economy prospect of any processes. To this end, a comprehensive review on catalysts, which include noble metals, non-noble metals, and non-metals anchored over various supports are incorporated in this review. Moreover, a fundamental insight into the development of future electrocatalysts for glycerol oxidation along with products analysis is also presented.

From crude industrial waste glycerol to biopropene via Ru-mediated hydrodeoxygenation in ionic liquids

The catalytic conversion of crude glycerol to biopropene was investigated. A bifunctional Ru-ionic liquid system showed a high tolerance for common crude glycerol impurities like water, salts and methanol. After optimizing both dehydration and olefin selectivity, a 82% biopropene yield (94% selectivity) was obtained directly from industrial waste glycerol.

Gas Phase Glycerol Valorization over Ceria Nanostructures with Well-Defined Morphologies

Glycerol solutions were vaporized and reacted over ceria catalysts with different morphologies to investigate the relationship of product distribution to the surface facets exposed, particularly, the yield of bio-renewable methanol. Ceria was prepared with cubic, rodlike, and polyhedral morphologies via hydrothermal synthesis by altering the concentration of the precipitating agent or synthesis temperature. Glycerol conversion was found to be low over the ceria with a cubic morphology, and this was ascribed to both a low surface area and relatively high acidity. Density functional theory calculations also showed that the (100) surface is likely to be hydroxylated under reaction conditions which could limit the availability of basic sites. Methanol space-time-yields over the polyhedral ceria samples were more than four times that for the cubic material at 400 °C, where 201 g of methanol was produced per hour per kilogram of the catalyst. Under comparable glycerol conversions, we show that the rodlike and polyhedral catalysts produce a major intermediate to methanol, hydroxyacetone (HA), with a selectivity of ca. 45%, but that over the cubic sample, this was found to be 15%. This equates to a 13-fold increase in the space-time-yield of HA over the polyhedral samples compared to the cubes at 320 °C. The implications of this difference are discussed with respect to the reaction mechanism, suggesting that a different mechanism dominates over the cubic catalysts to that for rodlike and polyhedral catalysts. The strong association between exposed surface facets of ceria to high methanol yields is an important consideration for future catalyst design in this area.

Catalytic methods for chemical recycling or upcycling of commercial polymers

Polymers (plastics) have transformed our lives by providing access to inexpensive and versatile materials with a variety of useful properties. While polymers have improved our lives in many ways, their longevity has created some unintended consequences. The extreme stability and durability of most commercial polymers, combined with the lack of equivalent degradable alternatives and ineffective collection and recycling policies, have led to an accumulation of polymers in landfills and oceans. This problem is reaching a critical threat to the environment, creating a demand for immediate action. Chemical recycling and upcycling involve the conversion of polymer materials into their original monomers, fuels or chemical precursors for value-added products. These approaches are the most promising for value-recovery of post-consumer polymer products; however, they are often cost-prohibitive in comparison to current recycling and disposal methods. Catalysts can be used to accelerate and improve product selectivity for chemical recycling and upcycling of polymers. This review aims to not only highlight and describe the tremendous efforts towards the development of improved catalysts for well-known chemical recycling processes, but also identify new promising methods for catalytic recycling or upcycling of the most abundant commercial polymers.

Meta-analysis of the effect of glycerin inclusion in dairy cattle diet on milk fatty acid profile

The use of glycerin in diets for dairy cows initially emerged as an alternative for the prevention and control of ketosis. However, despite some controversy, there are still several studies associating glycerin with increases in daily milk yield, with possible changes in its constituents. Therefore, the objective of this study was to evaluate, using a meta-analysis approach, the effect of glycerin inclusion in dairy cow diets on milk fatty acid. Twenty-two peer-reviewed publications with 66 treatment means were included in data set. The effect of glycerin inclusion in diet (treatment) were evaluated using random-effect models to examine the weighted mean differences (WMD) between a control diet (without glycerin in the diet) and the treatment diet. Heterogeneity was explored by meta-regression and subgroup analysis performed for: genetic type; days in milk; experimental period; glycerin in diet; glycerin type and concentrate in diet. Inclusion of glycerin in the diet increased the digestibility of dry matter and protein, as well as ruminal propionate. It did not affect dry matter intake (P = 0.351) and milk yield (P = 0.730). The effect of glycerin inclusion on the milk fat yield is dependent on the genetic group, in which Holstein (WMD = −0.04 kg/d; P = 0.010) and Holstein-crossbreed (WMD = −0.10 kg/d; P < 0.0001) cows produced less fat in milk compared to Jersey cows, when glycerin was included in the diets. Glycine inclusions of up to 100 g/kg in the diet of dairy cows did not negatively affect milk production and composition. However, inclusions above 150 g/kg of glycerin in the diet reduced the concentration of fat, and of unsaturated, monounsaturated, polyunsaturated fatty acids and conjugated linoleic acid (CLA C18: 2 cis-9 and trans-11) in milk. The results reported in our meta-analysis does not demonstrate the effectiveness of glycerin in improving the composition of milk and a group of fatty acids of importance for human health such as C18: 2 cis-9, trans-11 CLA.

A Focus on the Transformation Processes for the Valorization of Glycerol Derived from the Production Cycle of Biofuels

Glycerol is a valuable by-product in the biodiesel industries. However, the increase in biodiesel production resulted in an excess production of glycerol, with a limited market compared to its availability. Precisely because glycerol became a waste to be disposed of, the costs of biodiesel production have reduced. From an environmental point of view, identifying reactions that can convert glycerol into new products that can be reused in different applications has become a real necessity. According to the unique structural characteristics of glycerol, transformation processes can lead to different chemical functionalities through redox reactions, dehydration, esterification, and etherification, with the formation of products that can be applied both at the finest chemical level and to bulk chemistry.

Acetalization of glycerol and benzaldehyde to synthesize biofuel additives using SO4 2-/CeO2-ZrO2 catalyst

Synthesis of 1,3- dioxane and 1,3-dioxolane, using sulfated CeO₂–ZrO₂ catalyst for acetalization of glycerol with benzaldehyde, is the focus of present work. SO₄^2-/CeO₂–ZrO₂ catalyst was synthesized using combustion method. Experiments were carried out to analyze the effect of various solvents (n-hexane, toluene, tert-butyl alcohol, pentanol), molar ratios (1:3, 1:5, 1:7), catalyst loadings (3 wt%, 5 wt%, 9 wt %) and temperatures (80 °C, 90 °C, 100 °C) on glycerol conversion and selectivity of the products. Selectivity of 87.20% dioxolane and 12.80% dioxane was obtained at molar ratio of 1:3, 9 wt% catalyst loading and temperature of 100 °C.Strong NH₃ desorption peak from NH₃-TPD study indicated the high acidic strength of sulphated catalyst. Strong surface acidity and surface porosity (observed from TEM and SEM analysis) contributed to an enhanced activity of the catalyst for glycerol acetalization reaction. The kinetics of the reaction was studied using an elementary kinetic law. A correlation coefficient of 0.98 from the selected kinetic model proved that the rate of acetalization reaction was dependent on glycerol concentration and acetal formation was instantaneous. The study demonstrated the application of an environmentally benign, inexpensive, thermally stable, active SO₄^2-/CeO₂–ZrO₂ catalyst for glycerol acetalization reaction to synthesize 1,3-dioxolane as the desired product.

Current developments and future trends in photocatalytic glycerol valorization: process analysis

Challenges and opportunities in photocatalytic glycerol valorization to hydrogen and value-added liquid products: process analysis and parametric study.

In vivo evaluation of the toxicity, genotoxicity, histopathological, and anti-inflammatory effects of the purified bioglycerol byproduct in biodiesel industry

BACKGROUND

Biodiesel has gained an increased popularity as a good alternative for fossil fuel because of its unusual qualities as a biodegradable, nontoxic, and renewable diesel fuel. Hence, the economic utilization of the accumulated bioglycerol byproduct became critically important for the sustainability of biodiesel industry. The purified bioglycerol might be used as a valuable industrial stock in cosmetic, medical, and food industries. However, if the purified product is going to be used in food, drug, or any industry that involves its ingestion or skin contact by human or animals, the product should be thoroughly tested on animal models.

RESULTS

The present study investigated the acute toxicity, anti-inflammatory, histopathological, and genotoxic effects of zeolite-purified biogylcerol on different animal models. All the previous tests proved the ability of the purification process to improve the qualities of the crude bioglycerol to a degree comparable to the pharmaceutical grade glycerol.

CONCLUSION

In other words, it could be concluded that zeolite-purified bioglycerol can be used in different industries that involves products consumed by human or animals.

Influence of Heterogeneous Catalysts and Reaction Parameters on the Acetylation of Glycerol to Acetin: A Review

Glycerol, a polyhydric alcohol, is currently receiving greater attention worldwide in view of its glut in the market occasioned by the recent upsurge in biodiesel production. The acetylation of glycerol to acetin (acetyl glycerol) is one of the many pathways of upgrading glycerol to fine chemicals. Acetin, which could be mono, di, and or triacetin, has versatile applications in the cosmetics, medicines, food, polymer, and fuel industries as a humectant, emulsifier, plasticizer, and fuel additive and so it is of high economic value. Given the critical role of catalysts in green chemistry, this paper reports the influence of the different heterogeneous catalysts used in glycerol acetylation. It also reviewed the influence of catalyst load, temperature, molar ratio, and the time on the reaction.

Construction of Recombinant Klebsiella pneumoniae to Increase Ethanol Production on Residual Glycerol Fed-Batch Cultivations

K. pneumoniae BLh-1 strain was genetically modified aiming at obtaining high ethanol productivity in cultivations using residual glycerol from biodiesel synthesis as substrate. The recombinant strain K. pneumoniae Kp17 was obtained by inserting the multicopy plasmid pTOPOBL17 containing the AdhE gene, and its own promoter, from K. pneumoniae BLh-1. Influence of Fe²⁺ supplementation and initial glycerol concentration on culture conditions were analyzed, both in rotatory shaker and in batch bioreactors. In the bioreactor cultures, K. pneumoniae Kp17 strain produced 4.5 g L^-1 of ethanol (productivity of 0.50 g L^-1 h^-1 and yields of 0.15 g g^-1) after 24-h cultivation, corresponding to an increase of approximately 40% in ethanol concentration compared to wild strain, K. pneumoniae BLh-1. Best conditions were then applied in exponential fed-batch bioreactors, with final ethanol concentration of 17.30 g L^-1 (productivity of 0.59 g L^-1 h^-1 and yields of 0.16 g g^-1) after 30 h of feeding, representing 11.5% of increment in titer of ethanol compared to the wild strain. Mutant cells kept 92.5% of the plasmids under batch in 24 h, and 71.9% under fed-batch after 27 h of exponential feeding. The findings in this work show the possibility of using a simple approach to genetically modify K. pneumoniae to be employed this versatile bacterium for the bioconversion of residual glycerol into ethanol.

Preparation and Uses of Chlorinated Glycerol Derivatives

Crude glycerol (C3H8O3) is a major by-product of biodiesel production from vegetable oils and animal fats. The increased biodiesel production in the last two decades has forced glycerol production up and prices down. However, crude glycerol from biodiesel production is not of adequate purity for industrial uses, including food, cosmetics and pharmaceuticals. The purification process of crude glycerol to reach the quality standards required by industry is expensive and dificult. Novel uses for crude glycerol can reduce the price of biodiesel and make it an economical alternative to diesel. Moreover, novel uses may improve environmental impact, since crude glycerol disposal is expensive and dificult. Glycerol is a versatile molecule with many potential applications in fermentation processes and synthetic chemistry. It serves as a glucose substitute in microbial growth media and as a precursor in the synthesis of a number of commercial intermediates or fine chemicals. Chlorinated derivatives of glycerol are an important class of such chemicals. The main focus of this review is the conversion of glycerol to chlorinated derivatives, such as epichlorohydrin and chlorohydrins, and their further use in the synthesis of additional downstream products. Downstream products include non-cyclic compounds with allyl, nitrile, azide and other functional groups, as well as oxazolidinones and triazoles, which are cyclic compounds derived from ephichlorohydrin and chlorohydrins. The polymers and ionic liquids, which use glycerol as an initial building block, are highlighted, as well.