Modeling Time-Dependent Aquatic Toxicity of Hydrocarbons: Role of Organism Weight, Temperature, and Substance Hydrophobicity

Environmental hazard and preliminary risk assessment of herding agents used in next generation oil spill response

Herding agents offer a significant advance in oil spill response by overcoming past barriers limiting effectiveness of in-situ burning. This paper reviews the use, environmental fate and effects of two commercial herders, Siltech OP-40 and ThickSlick 6535. A conceptual model is proposed to describe herder fate followed by a screening exposure analysis. Hazard concentrations intended to protect aquatic life are derived using empirical toxicity data, interspecies correlation estimation and group target site models. Using exposure and hazard evaluations, a preliminary risk assessment is performed demonstrating acceptable risk to aquatic life. Hazards posed to wildlife are also reviewed. Potential harm to wildlife can be avoided or minimized by adopting best management application practices. This synthesis is intended to provide a valuable resource describing the rationale for herder use, evaluating environmental risk trade-offs and informing future oil spill response planning and decision-making. Priorities for further research are identified.

A Review of Mechanistic Models for Predicting Adverse Effects in Sediment Toxicity Testing

Since recognizing the importance of bioavailability for understanding the toxicity of chemicals in sediments, mechanistic modeling has advanced over the last 40 years by building better tools for estimating exposure and making predictions of probable adverse effects. Our review provides an up-to-date survey of the status of mechanistic modeling in contaminated sediment toxicity assessments. Relative to exposure, advances have been most substantial for non-ionic organic contaminants (NOCs) and divalent cationic metals, with several equilibrium partitioning-based (Eq-P) models having been developed. This has included the use of Abraham equations to estimate partition coefficients for environmental media. As a result of the complexity of their partitioning behavior, progress has been less substantial for ionic/polar organic contaminants. When the EqP-based estimates of exposure and bioavailability are combined with water-only effects measurements, predictions of sediment toxicity can be successfully made for NOCs and selected metals. Both species sensitivity distributions and toxicokinetic and toxicodynamic models are increasingly being applied to better predict contaminated sediment toxicity. Furthermore, for some classes of contaminants, such as polycyclic aromatic hydrocarbons, adverse effects can be modeled as mixtures, making the models useful in real-world applications, where contaminants seldomly occur individually. Despite the impressive advances in the development and application of mechanistic models to predict sediment toxicity, several critical research needs remain to be addressed. These needs and others represent the next frontier in the continuing development and application of mechanistic models for informing environmental scientists, managers, and decisions makers of the risks associated with contaminated sediments. Environ Toxicol Chem 2024;43:1778-1794. © 2023 SETAC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.

The lethal and sublethal impacts of two tire rubber-derived chemicals on brook trout (Salvelinus fontinalis) fry and fingerlings

Recent toxicity studies of stormwater runoff implicated N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone) as the contaminant responsible for the mass mortality of coho salmon (Oncorhynchus kisutch). In the wake of this discovery, 6PPD-quinone has been measured in waterways around urban centers, along with other tire wear leachates like hexamethoxymethylmelamine (HMMM). The limited data available for 6PPD-quinone have shown toxicity can vary depending on the species. In this study we compared the acute toxicity of 6PPD-quinone and HMMM to Brook trout (Salvelinus fontinalis) fry and fingerlings. Our results show that fry are ∼3 times more sensitive to 6PPD-quinone than fingerlings. Exposure to HMMM ≤6.6 mg/L had no impact on fry survival. These results highlight the importance of conducting toxicity tests on multiple life stages of fish species, and that relying on fingerling life stages for species-based risk assessment may underestimate the impacts of exposure. 6PPD-quinone also had many sublethal effects on Brook trout fingerlings, such as increased interlamellar cell mass (ILCM) size, hematocrit, blood glucose, total CO2, and decreased blood sodium and chloride concentrations. Linear relationships between ILCM size and select blood parameters support the conclusion that 6PPD-quinone toxicity is an outcome of osmorespiratory challenges imposed by gill impairment.

Temperate Versus Arctic: Unraveling the Effects of Temperature on Oil Toxicity in Gammarids

Shipping activities are increasing with sea ice receding in the Arctic, leading to higher risks of accidents and oil spills. Because Arctic toxicity data are limited, oil spill risk assessments for the Arctic are challenging to conduct. In the present study, we tested if acute oil toxicity metrics obtained at temperate conditions reflect those at Arctic conditions. The effects of temperature (4 °C, 12 °C, and 20 °C) on the median lethal concentration (LC50) and the critical body residue (CBR) of the temperate invertebrate Gammarus locusta exposed to water accommodated fractions of a fuel oil were determined. Both toxicity metrics decreased with increasing temperature. In addition, data for the temperate G. locusta were compared to data obtained for Arctic Gammarus species at 4 °C. The LC50 for the Arctic Gammarus sp. was a factor of 3 higher than that for the temperate G. locusta at 4 °C, but its CBR was similar, although both the exposure time and concentration were extended to reach lethality. Probably, this was a result of the larger size and higher weight and total lipid content of Arctic gammarids compared to the temperate gammarids. Taken together, the present data support the use of temperate acute oil toxicity data as a basis for assessing risks in the Arctic region, provided that the effects of temperature on oil fate and functional traits (e.g., body size and lipid content) of test species are considered. As such, using the CBR as a toxicity metric is beneficial because it is independent of functional traits, despite its temperature dependency. To the best of our knowledge, the present study is the first to report CBRs for oil. Environ Toxicol Chem 2024;43:1627-1637. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Parsing the toxicity paradox: Composition and duration of exposure alter predicted oil spill effects by orders of magnitude

Oil spilled into an aquatic environment produces oil droplet and dissolved component concentrations and compositions that are highly variable in space and time. Toxic effects on aquatic biota vary with sensitivity of the organism, concentration, composition, environmental conditions, and frequency and duration of exposure to the mixture of oil-derived dissolved compounds. For a range of spill (surface, subsea, blowout) and oil types under different environmental conditions, modeling of oil transport, fate, and organism behavior was used to quantify expected exposures over time for planktonic, motile, and stationary organisms. Different toxicity models were applied to these exposure time histories to characterize the influential roles of composition, concentration, and duration of exposure on aquatic toxicity. Misrepresenting these roles and exposures can affect results by orders of magnitude. Well-characterized laboratory studies for <24-hour exposures are needed to improve toxicity predictions of the typically short-term exposures that characterize spills.

Mind the gap - Relevant design for laboratory oil exposure of fish as informed by a numerical impact assessment model

Laboratory experiments provide knowledge of species-specific effects thresholds that are used to parameterize impact assessment models of oil contamination on marine ecosystems. Such experiments typically place individuals of species and life stages in tanks with different contaminant concentrations. Exposure concentrations are usually fixed, and the individuals experience a shock treatment being moved from clean water directly into contaminated water and then back to clean water. In this study, we use a coupled numerical model that simulates ocean currents and state, oil dispersal and fate, and early life stages of fish to quantify oil exposure histories, specifically addressing oil spill scenarios of high rates and long durations. By including uptake modelling we also investigate the potential of buffering transient high peaks in exposure. Our simulation results are the basis for a recommendation on the design of laboratory experiments to improve impact assessment model development and parameterization. We recommend an exposure profile with three main phases: i) a gradual increase in concentration, ii) a transient peak that is well above the subsequent level, and iii) a plateau of fixed concentration lasting ∼3 days. In addition, a fourth phase with a slow decrease may be added.

Changes in Temperature Alter the Toxicity of Polycyclic Aromatic Compounds to American Lobster (Homarus americanus) Larvae

Polycyclic aromatic compounds (PACs) present in the water column are considered to be one of the primary contaminant groups contributing to the toxicity of a crude oil spill. Because crude oil is a complex mixture composed of thousands of different compounds, oil spill models rely on quantitative structure-activity relationships like the target lipid model to predict the effects of crude oil exposure on aquatic life. These models rely on input provided by single species toxicity studies, which remain insufficient. Although the toxicity of select PACs has been well studied, there is little data available for many, including transformation products such as oxidized hydrocarbons. In addition, the effect of environmental influencing factors such as temperature on PAC toxicity is a wide data gap. In response to these needs, in the present study, Stage I lobster larvae were exposed to six different understudied PACs (naphthalene, fluorenone, methylnaphthalene, phenanthrene, dibenzothiophene, and fluoranthene) at three different relevant temperatures (10, 15, and 20 °C) all within the biological norms for the species during summer when larval releases occur. Lobster larvae were assessed for immobilization as a sublethal effect and mortality following 3, 6, 12, 24, and 48 h of exposure. Higher temperatures increased the rate at which immobilization and mortality were observed for each of the compounds tested and also altered the predicted critical target lipid body burden, incipient median lethal concentration, and elimination rate. Our results demonstrate that temperature has an important influence on PAC toxicity for this species and provides critical data for oil spill modeling. More studies are needed so oil spill models can be appropriately calibrated and to improve their predictive ability. Environ Toxicol Chem 2023;42:2389-2399. © 2023 SETAC.

Sensitivity of the Indo-Pacific coral Acropora millepora to aromatic hydrocarbons

The risks posed by petroleum spills to coral reefs are poorly understood and quantifying acute toxicity thresholds for aromatic hydrocarbons to reef-building corals is required to assess their sensitivity relative to other taxa. In this study, we exposed Acropora millepora to toluene, naphthalene and 1-methylnaphthalene (1-MN) in a flow-through system and assessed survivorship and sublethal responses including growth, colour and the photosynthetic performance of symbionts. Median 50% lethal concentrations (LC50s) decreased over the 7-d exposure period, reaching asymptotic values of 22,921, 5,268, 1167 μg L^-1 for toluene, naphthalene and 1-MN, respectively. Corresponding toxicokinetic parameters (ε_LC50) defining the time progression of toxicity were 0.830, 0.692, and 0.256 d^-1, respectively. Latent effects after an additional 7-d recovery in uncontaminated seawater were not observed. Effect concentrations (EC50s) for 50% growth inhibition were 1.9- to 3.6-fold lower than the LC50s for each aromatic hydrocarbon. There were no observed effects of aromatic hydrocarbon exposure on colour score (a proxy for bleaching) or photosynthetic efficiency. Acute and chronic critical target lipid body burdens (CTLBBs) of 70.3 ± 16.3 and 13.6 ± 18.4 μmol g^-1 octanol (± standard error) were calculated for survival and growth inhibition based on 7-d LC50 and EC10 values, respectively. These species-specific constants indicate adult A. millepora is more sensitive than other corals reported so far but is of average sensitivity in comparison with other aquatic taxa in the target lipid model database. These results advance our understanding of acute hazards of petroleum contaminants to key habitat-building tropical coral reef species.

Adopting a toxic unit model paradigm in design, analysis and interpretation of oil toxicity testing

The lack of a conceptual understanding and unifying quantitative framework to guide conduct and interpretation of laboratory oil toxicity tests, has led investigators to divergent conclusions that can confuse stakeholders and impede sound decision-making. While a plethora of oil toxicity studies are available and continue to be published, due to differences in experimental design, results between studies often cannot be compared. Furthermore, much resulting data fails to advance quantitative effect models that are critically needed for oil spill risk and impact assessments. This paper discusses the challenges posed when evaluating oil toxicity test data based on traditional, total concentration-based exposure metrics and offers solutions for improving the state of practice by adopting a unifying toxic unit (TU) model framework. Key advantages of a TU framework is that differences in test oil composition, sensitivity of the test organism/endpoint, and toxicity test design (i.e., type of test) can be taken into quantitative account in predicting aquatic toxicity. This paradigm shift is intended to bridge the utility of laboratory oil toxicity tests with improved assessment of effects in the field. To illustrate these advantages, results from literature studies are reassessed and contrasted with conclusions obtained based on past practice. Using instructive examples, model results are presented to explain how dissolved oil composition and concentrations and resulting TUs vary in WAFs prepared using variable loading or dilution test designs and the important role that unmeasured oil components contribute to predicted oil toxicity. Model results are used to highlight how the TU framework can serve as a valuable aid in designing and interpreting empirical toxicity tests and provide the data required to validate/refine predictive toxicity models. To further promote consistent exposure and hazard assessment of physically and chemically dispersed oil toxicity tests recommendations for advancing the TU framework are presented.