Validation of dye-binding/high-resolution thermal denaturation for the identification of mutations in the SLC22A5 gene

Inflammation and Organic Cation Transporters Novel (OCTNs)

Inflammation is a physiological condition characterized by a complex interplay between different cells handled by metabolites and specific inflammatory-related molecules. In some pathological situations, inflammation persists underlying and worsening the pathological state. Over the years, two membrane transporters namely OCTN1 (SLC22A4) and OCTN2 (SLC22A5) have been shown to play specific roles in inflammation. These transporters form the OCTN subfamily within the larger SLC22 family. The link between these proteins and inflammation has been proposed based on their link to some chronic inflammatory diseases such as asthma, Crohn's disease (CD), and rheumatoid arthritis (RA). Moreover, the two transporters show the ability to mediate the transport of several compounds including carnitine, carnitine derivatives, acetylcholine, ergothioneine, and gut microbiota by-products, which have been specifically associated with inflammation for their anti- or proinflammatory action. Therefore, the absorption and distribution of these molecules rely on the presence of OCTN1 and OCTN2, whose expression is modulated by inflammatory cytokines and transcription factors typically activated by inflammation. In the present review, we wish to provide a state of the art on OCTN1 and OCTN2 transport function and regulation in relationships with inflammation and inflammatory diseases focusing on the metabolic signature collected in different body districts and gene polymorphisms related to inflammatory diseases.

A novel pathogenic variant in the carnitine transporter gene, SLC22A5, in association with metabolic carnitine deficiency and cardiomyopathy features

BACKGROUND

Primary carnitine deficiency (PCD) denotes low carnitine levels with an autosomal recessive pattern of inheritance. Cardiomyopathy is the most common cardiac symptom in patients with PCD, and early diagnosis can prevent complications. Next-generation sequencing can identify genetic variants attributable to PCD efficiently.

OBJECTIVE

We aimed to detect the genetic cause of the early manifestations of hypertrophic cardiomyopathy and metabolic abnormalities in an Iranian family.

METHODS

We herein describe an 8-year-old boy with symptoms of weakness and lethargy diagnosed with PCD through clinical evaluations, lab tests, echocardiography, and cardiac magnetic resonance imaging. The candidate variant was confirmed through whole-exome sequencing, polymerase chain reaction, and direct Sanger sequencing. The binding efficacy of normal and mutant protein-ligand complexes were evaluated via structural modeling and docking studies.

RESULTS

Clinical evaluations, echocardiography, and cardiac magnetic resonance imaging findings revealed hypertrophic cardiomyopathy as a clinical presentation of PCD. Whole-exome sequencing identified a new homozygous variant, SLC22A5 (NM_003060.4), c.821G > A: p.Trp274Ter, associated with carnitine transport. Docking analysis highlighted the impact of the variant on carnitine transport, further indicating its potential role in PCD development.

CONCLUSIONS

The c.821G > A: p.Trp274Ter variant in SLC22A5 potentially acted as a pathogenic factor by reducing the binding affinity of organic carnitine transporter type 2 proteins for carnitine. So, the c.821G > A variant may be associated with carnitine deficiency, metabolic abnormalities, and cardiomyopathic characteristics.

Clinical characteristics of primary carnitine deficiency: A structured review using a case-by-case approach

A broad spectrum of signs and symptoms has been attributed to primary carnitine deficiency (PCD) since its first description in 1973. Advances in diagnostic procedures have improved diagnostic accuracy and the introduction of PCD in newborn screening (NBS) programs has led to the identification of an increasing number of PCD patients, including mothers of screened newborns, who may show a different phenotype compared to clinically diagnosed patients. To elucidate the spectrum of signs and symptoms in PCD patients, we performed a structured literature review. Using a case-by-case approach, clinical characteristics, diagnostic data, and mode of patient identification were recorded. Signs and symptoms were categorized by organ involvement. In total, 166 articles were included, reporting data on 757 individual patients. In almost 20% (N = 136) of the cases, the diagnosis was based solely on low carnitine concentration which we considered an uncertain diagnosis of PCD. The remaining 621 cases had a diagnosis based on genetic and/or functional (ie, carnitine transporter activity) test results. In these 621 cases, cardiac symptoms (predominantly cardiomyopathy) were the most prevalent (23.8%). Neurological (7.1%), hepatic (8.4%), and metabolic (9.2%) symptoms occurred mainly in early childhood. Adult onset of symptoms occurred in 16 of 194 adult patients, of whom 6 (3.1%) patients suffered a severe event without any preceding symptom (five cardiac events and one coma). In conclusion, symptoms in PCD predominantly develop in early childhood. Most newborns and mothers of newborns detected through NBS remain asymptomatic. However, though rarely, severe complications do occur in both groups.

Increased detection of primary carnitine deficiency through second-tier newborn genetic screening

BACKGROUND

Newborn screening for primary carnitine deficiency (NBS) is commonly implemented worldwide; however, it has poor sensitivity. This study aimed to evaluate the feasibility of improving screening by including a second-tier genetic assay.

RESULTS

An Agena iPLEX assay was developed to identify 17 common SLC22A5 mutations in Chinese populations and was applied in NBS as a second-tier screening. From January 2017 to December 2018, 204,777 newborns were screened for PCD using tandem mass spectrometry. A total of 316 (0.15%) residual NBS-positive specimens with low free carnitine (C0) levels were subjected to this second-tier screening. The screening identified 20 screen-positive newborns who harboured biallelic mutations in theSLC22A5 gene, 99 carriers with one mutation, and 197 screen-negative newborns with no mutations. Among the 99 carriers, four newborns were found to have a second disease-causing SLC22A5mutation by further genetic analysis. Among the 197 screen-negatives were four newborns with persistently low C0 levels, and further genetic analysis revealed that one newborn had two novel SLC22A5 pathogenic variants. In total, 25 newborns were diagnosed with PCD, for a positive predictive value of 7.91% (25/316). Based on these data, we estimate the incidence of PCD in Quanzhou is estimated to be 1:8191.Thirteen distinct SLC22A5 variants were identified, and the most common was c.760C > T, with an allelic frequency of 32% (16/50), followed by c.1400C > G (7/50, 14%), and c.51C > G (7/50, 14%).

CONCLUSION

Data from this study revealed that 24% (6/25) of PCD cases would have been missed by conventional NBS. This high-throughput iPLEX assay is a powerful tool for PCD genotyping. The addition of this second-tier genetic screening to the current NBS program could identify missed PCD cases, thereby increasing PCD detection. However, further studies are needed to optimise the workflow of the new screening algorithm and to evaluate the cost-effectiveness of this screening approach.

Screening 3.4 million newborns for primary carnitine deficiency in Zhejiang Province, China

Testing for primary carnitine deficiency (PCD) has been implemented in many newborn screening (NBS) programs, but few large-scale studies on NBS for PCD have been reported in China. This study aimed to assess the incidence and biochemical, clinical, and genetic characteristics of PCD discovered by NBS. Dried blood spots from newborns were analyzed by tandem mass spectrometry (MS/MS) and suspected positive patients were further tested using molecular genetic analysis. Infants who carried two variants in SLC22A5 or those with extremely low free carnitine levels during recall were referred for follow-up and treatment. Over 3.4 million newborns were screened and 113 newborns were diagnosed with PCD, yielding a positive predictive value of 1.93%. In addition, 63 mothers with PCD were identified. The incidence of PCD in newborns and mothers in Zhejiang was 1:30,182 and 1:54,137, respectively. Thirty-seven distinct variants were identified in SLC22A5 of which 10 were novel. c.1400C > G (p.S467C) was the most prevalent variant in both newborns and mothers with PCD, while c.760C > T (p.R254*), which is reportedly common in other Chinese regions, was rarely detected in maternal PCD patients. This study reports the largest series of patients with PCD detected by NBS and identifies 10 novel variants, expanding the variant spectrum of SLC22A5.

Functional and molecular studies in primary carnitine deficiency

Primary carnitine deficiency is caused by a defect in the OCTN2 carnitine transporter encoded by the SLC22A5 gene. It can cause hypoketotic hypoglycemia or cardiomyopathy in children, and sudden death in children and adults. Fibroblasts from affected patients have reduced carnitine transport. We evaluated carnitine transport in fibroblasts from 358 subjects referred for possible carnitine deficiency. Carnitine transport was reduced to 20% or less of normal in fibroblasts of 140 out of 358 subjects. Sequencing of the 10 exons and flanking regions of the SLC22A5 gene in 95 out of 140 subjects identified causative variants in 84% of the alleles. The missense variants identified in our patients and others previously reported (n = 92) were expressed in CHO cells. Carnitine transport was impaired by 73 out of 92 variants expressed. Prediction algorithms (Polyphen-2, SIFT) correctly predicted the functional effects of expressed variants in about 80% of cases. These results indicate that mutations in the coding region of the SLC22A5 gene cannot be identified in about 16% of the alleles causing primary carnitine deficiency. Prediction algorithms failed to determine the functional effects of amino acid substitutions in this transmembrane protein in about 20% of cases. Therefore, functional studies in fibroblasts remain the best strategy to confirm or exclude a diagnosis of primary carnitine deficiency.

Carnitine transport and fatty acid oxidation

Carnitine is essential for the transfer of long-chain fatty acids across the inner mitochondrial membrane for subsequent β-oxidation. It can be synthesized by the body or assumed with the diet from meat and dairy products. Defects in carnitine biosynthesis do not routinely result in low plasma carnitine levels. Carnitine is accumulated by the cells and retained by kidneys using OCTN2, a high affinity organic cation transporter specific for carnitine. Defects in the OCTN2 carnitine transporter results in autosomal recessive primary carnitine deficiency characterized by decreased intracellular carnitine accumulation, increased losses of carnitine in the urine, and low serum carnitine levels. Patients can present early in life with hypoketotic hypoglycemia and hepatic encephalopathy, or later in life with skeletal and cardiac myopathy or sudden death from cardiac arrhythmia, usually triggered by fasting or catabolic state. This disease responds to oral carnitine that, in pharmacological doses, enters cells using the amino acid transporter B(0,+). Primary carnitine deficiency can be suspected from the clinical presentation or identified by low levels of free carnitine (C0) in the newborn screening. Some adult patients have been diagnosed following the birth of an unaffected child with very low carnitine levels in the newborn screening. The diagnosis is confirmed by measuring low carnitine uptake in the patients' fibroblasts or by DNA sequencing of the SLC22A5 gene encoding the OCTN2 carnitine transporter. Some mutations are specific for certain ethnic backgrounds, but the majority are private and identified only in individual families. Although the genotype usually does not correlate with metabolic or cardiac involvement in primary carnitine deficiency, patients presenting as adults tend to have at least one missense mutation retaining residual activity. This article is part of a Special Issue entitled: Mitochondrial Channels edited by Pierre Sonveaux, Pierre Maechler and Jean-Claude Martinou.

High-resolution melting (HRM) assay for the detection of recurrent BRCA1/BRCA2 germline mutations in Tunisian breast/ovarian cancer families

Germline deleterious mutations in the BRCA1/BRCA2 genes are associated with an increased risk for the development of breast and ovarian cancer. Given the large size of these genes the detection of such mutations represents a considerable technical challenge. Therefore, the development of cost-effective and rapid methods to identify these mutations became a necessity. High resolution melting analysis (HRM) is a rapid and efficient technique extensively employed as high-throughput mutation scanning method. The purpose of our study was to assess the specificity and sensitivity of HRM for BRCA1 and BRCA2 genes scanning. As a first step we estimate the ability of HRM for detection mutations in a set of 21 heterozygous samples harboring 8 different known BRCA1/BRCA2 variations, all samples had been preliminarily investigated by direct sequencing, and then we performed a blinded analysis by HRM in a set of 68 further sporadic samples of unknown genotype. All tested heterozygous BRCA1/BRCA2 variants were easily identified. However the HRM assay revealed further alteration that we initially had not searched (one unclassified variant). Furthermore, sequencing confirmed all the HRM detected mutations in the set of unknown samples, including homozygous changes, indicating that in this cohort, with the optimized assays, the mutations detections sensitivity and specificity were 100 %. HRM is a simple, rapid and efficient scanning method for known and unknown BRCA1/BRCA2 germline mutations. Consequently the method will allow for the economical screening of recurrent mutations in Tunisian population.

Primary carnitine deficiency: novel mutations and insights into the cardiac phenotype

Solute carrier family 22 member 5 (SLC22A5) encodes a sodium-dependent ion transporter responsible for shuffling carnitine across the plasma membrane. This process provides energy for the heart, among other organs allowing beta-oxidation of fatty acids. Mutations in SLC22A5 result in primary carnitine deficiency (PCD), a disorder that manifests with cardiac, skeletal, or metabolic symptoms. We hereby describe two novel mutations in SLC22A5 in two Lebanese families associated exclusively with a cardiac phenotype. The frequency of the cardiac, metabolic and skeletal symptoms in PCD patients remains undefined. All the reported eight PCD patients belonging to five different Lebanese families have an exclusive cardiac phenotype. Carnitine levels appear to be directly linked to the type and position of the mutation and the severity of the phenotypic presentation does not seem to be associated with serum carnitine levels. A comprehensive review of 61 literature-reported PCD cases revealed an exclusive cardiac manifestation frequency at 62.3% with a very low likelihood of simultaneous occurrence of cardiac and metabolic manifestation.

Determination of RET Sequence Variation in an MEN2 Unaffected Cohort Using Multiple-Sample Pooling and Next-Generation Sequencing

Multisample, nonindexed pooling combined with next-generation sequencing (NGS) was used to discover RET proto-oncogene sequence variation within a cohort known to be unaffected by multiple endocrine neoplasia type 2 (MEN2). DNA samples (113 Caucasians, 23 persons of other ethnicities) were amplified for RET intron 9 to intron 16 and then divided into 5 pools of <30 samples each before library prep and NGS. Two controls were included in this study, a single sample and a pool of 50 samples that had been previously sequenced by the same NGS methods. All 59 variants previously detected in the 50-pool control were present. Of the 61 variants detected in the unaffected cohort, 20 variants were novel changes. Several variants were validated by high-resolution melting analysis and Sanger sequencing, and their allelic frequencies correlated well with those determined by NGS. The results from this unaffected cohort will be added to the RET MEN2 database.

Genotype-phenotype correlation in primary carnitine deficiency

Primary carnitine deficiency is caused by defective OCTN2 carnitine transporters encoded by the SLC22A5 gene. Lack of carnitine impairs fatty acid oxidation resulting in hypoketotic hypoglycemia, hepatic encephalopathy, skeletal and cardiac myopathy. Recently, asymptomatic mothers with primary carnitine deficiency were identified by low carnitine levels in their infant by newborn screening. Here, we evaluate mutations in the SLC22A5 gene and carnitine transport in fibroblasts from symptomatic patients and asymptomatic women. Carnitine transport was significantly reduced in fibroblasts obtained from all patients with primary carnitine deficiency, but was significantly higher in the asymptomatic women's than in the symptomatic patients' fibroblasts (P < 0.01). By contrast, ergothioneine transport (a selective substrate of the OCTN1 transporter, tested here as a control) was similar in cells from controls and patients with carnitine deficiency. DNA sequencing indicated an increased frequency of nonsense mutations in symptomatic patients (P < 0.001). Expression of the missense mutations in Chinese hamster ovary (CHO) cells indicated that many mutations retained residual carnitine transport activity, with no difference in the average activity of missense mutations identified in symptomatic versus asymptomatic patients. These results indicate that cells from asymptomatic women have on average higher levels of residual carnitine transport activity as compared to that of symptomatic patients due to the presence of at least one missense mutation.

Identification of mutations and evaluation of cardiomyopathy in Turkish patients with primary carnitine deficiency

Primary systemic carnitine deficiency (SCD) is an autosomal recessive disorder caused by defective cellular carnitine transport. Patients usually present with predominant metabolic or cardiac manifestations. SCD is caused by mutations in the organic cation/carnitine transporter OCTN2 (SLC22A5) gene. Mutation analysis of SLC22A5 gene was carried out in eight Turkish patients from six families. Six patients presented with signs and symptoms of heart failure, cardiomyopathy, and low plasma carnitine levels, five of them with concurrent anemia. A patient with dilated cardiomyopathy had also facial dysmorphia, microcephaly, and developmental delay. Tandem MS analyses in siblings of the patients revealed two more cases with low plasma carnitine levels. SCD diagnosis was confirmed in these two cases by mutation screening. These two cases were asymptomatic but echocardiography revealed left ventricular dilatation in one of them. Carnitine treatment was started before the systemic signs and symptoms developed in these patients. Mean value of serum carnitine levels of the patients was 2.63±1.92μmol/L at the time of diagnosis. After 1year of treatment, carnitine values increased to 16.62±5.11 (p<0.001) and all responded to carnitine supplementation clinically. Mutation screening of the OCTN2 gene study in the patients revealed two novel (p.G411V, p.G152R), and four previously identified mutations (p.R254X, p.R282X, p.R289X, p.T337Pfs12X). Early recognition and carnitine supplementation can be lifesaving in this inborn error of fatty acid oxidation.

High resolution melting analysis for a rapid identification of heterozygous and homozygous sequence changes in the MUTYH gene

Background

MUTYH-associated polyposis (MAP) is an autosomal recessive form of intestinal polyposis predisposing to colorectal carcinoma. High resolution melting analysis (HRMA) is a mutation scanning method that allows detection of heterozygous sequence changes with high sensitivity, whereas homozygosity for a nucleotide change may not lead to significant curve shape or melting temperature changes compared to homozygous wild-type samples. Therefore, HRMA has been mainly applied to the detection of mutations associated with autosomal dominant or X-linked disorders, while applications to autosomal recessive conditions are less common.

Methods

MUTYH coding sequence and UTRs were analyzed by both HRMA and sequencing on 88 leukocyte genomic DNA samples. Twenty-six samples were also examined by SSCP. Experiments were performed both with and without mixing the test samples with wild-type DNA.

Results

The results show that all MUTYH sequence variations, including G > C and A > T homozygous changes, can be reliably identified by HRMA when a condition of artificial heterozygosity is created by mixing test and reference DNA. HRMA had a sensitivity comparable to sequencing and higher than SSCP.

Conclusions

The availability of a rapid and inexpensive method for the identification of MUTYH sequence variants is relevant for the diagnosis of colorectal cancer susceptibility, since the MAP phenotype is highly variable.

Whole-genome amplified DNA from stored dried blood spots is reliable in high resolution melting curve and sequencing analysis

Background

The use of dried blood spots (DBS) samples in genomic workup has been limited by the relative low amounts of genomic DNA (gDNA) they contain. It remains to be proven that whole genome amplified DNA (wgaDNA) from stored DBS samples, constitutes a reliable alternative to gDNA.

We wanted to compare melting curves and sequencing results from wgaDNA derived from DBS samples with gDNA derived from whole blood.

Methods

gDNA was extracted from whole blood obtained from 10 patients with lone atrial fibrillation (mean age 22.3 years). From their newborn DBS samples, stored at -24°C, genomic DNA was extracted and whole-genome amplified in triplicates. Using high resolution melting curve analysis and direct sequencing in both wgaDNA and gDNA samples, all coding regions and adjacent intron regions of the genes SCN5A and KCNA5 were investigated.

Results

Altered melting curves was present in 85 of wgaDNA samples and 81 of gDNA samples. Sequence analysis identified a total of 31 variants in the 10 wgaDNA samples. The same 31 variants were found in the exact same pattern of samples in the gDNA group. There was no false positive or negative sequence variation in the wgaDNA group.

Conclusions

The use of DNA amplified in triplicates from DBS samples is reliable and can be used both for high resolution curve melting analysis as well as direct sequence analysis. DBS samples therefore can serve as an alternative to whole blood in sequence analysis.

Detection of somatic mutations by high-resolution DNA melting (HRM) analysis in multiple cancers

Identification of somatic mutations in cancer is a major goal for understanding and monitoring the events related to cancer initiation and progression. High resolution melting (HRM) curve analysis represents a fast, post-PCR high-throughput method for scanning somatic sequence alterations in target genes. The aim of this study was to assess the sensitivity and specificity of HRM analysis for tumor mutation screening in a range of tumor samples, which included 216 frozen pediatric small rounded blue-cell tumors as well as 180 paraffin-embedded tumors from breast, endometrial and ovarian cancers (60 of each). HRM analysis was performed in exons of the following candidate genes known to harbor established commonly observed mutations: PIK3CA, ERBB2, KRAS, TP53, EGFR, BRAF, GATA3, and FGFR3. Bi-directional sequencing analysis was used to determine the accuracy of the HRM analysis. For the 39 mutations observed in frozen samples, the sensitivity and specificity of HRM analysis were 97% and 87%, respectively. There were 67 mutation/variants in the paraffin-embedded samples, and the sensitivity and specificity for the HRM analysis were 88% and 80%, respectively. Paraffin-embedded samples require higher quantity of purified DNA for high performance. In summary, HRM analysis is a promising moderate-throughput screening test for mutations among known candidate genomic regions. Although the overall accuracy appears to be better in frozen specimens, somatic alterations were detected in DNA extracted from paraffin-embedded samples.

High-resolution DNA melting analysis in clinical research and diagnostics

Among nucleic acid analytical methods, high-resolution melting analysis is gaining more and more attention. High-resolution melting provides simple, homogeneous solutions for variant scanning and genotyping, addressing the needs of today's overburdened laboratories with rapid turnaround times and minimal cost. The flexibility of the technique has allowed it to be adopted by a wide range of disciplines for a variety of applications. In this review we examine the broad use of high-resolution melting analysis, including gene scanning, genotyping (including small amplicon, unlabeled probe and snapback primers), sequence matching and methylation analysis. Four major application arenas are examined to demonstrate the methods and approaches commonly used in particular fields. The appropriate usage of high-resolution melting analysis is discussed in the context of known constraints, such as sample quality and quantity, with a particular focus placed on proper experimental design in order to produce successful results.

High-resolution melting analysis, a simple and effective method for reliable mutation scanning and frequency studies in the ACADVL gene

Expanded newborn screening uses tandem mass spectrometry (MS/MS) to identify patients affected with fatty acid oxidation defects by the presence of pathological acylcarnitine esters. A caveat to MS/MS assessment is that cut-off values for disease-specific acylcarnitines does not always clearly discriminate affected patients from carriers and healthy individuals. Diagnostic evaluation of screening-positive samples is required to confirm a metabolic deficiency. With MS/MS newborn screening becoming established in a growing number of countries, streamlined means for time- and -effective follow-on diagnostic evaluation is essential. Moreover, studies to evaluate the diagnostic accuracy of MS/MS newborn screening are needed for determination and adjustment of precise cut-off values for the disease-specific acylcarnitines. In the current study, we use the fatty acid oxidation disorder very-long-chain acyl-CoA dehydrogenase deficiency (VLCADD), the second most common fatty acid oxidation disorder detected by expanded newborn screening, to demonstrate accurate and fast diagnostic evaluation of the ACADVL gene utilizing DNA extracted from the newborn screening dried blood spot and high resolution melt (HRM) profiling. We also demonstrate that HRM is a very effective means to determine carrier frequency of prevalent ACADVL mutations in the general population. Based on estimates of the expected disease incidence, we discuss the diagnostic accuracy of MS/MS-based newborn screening to identify VLCADD in Denmark.

Mutation screening of the DTNBP1 exonic sequence in 669 schizophrenics and 710 controls using high-resolution melting analysis

A large number of independent studies have reported evidence for association between the dysbindin gene (DTNBP1) and schizophrenia; however, specific risk alleles have been not been implicated as causal. In this study we set out to perform a comprehensive assessment of DNA variation within the exonic sequence of DTNBP1. To achieve this we optimized a high-resolution melting analysis (HRMA) protocol and applied it to screen all 11 DTNBP1 exons for DNA variants in a sample of 669 cases and 710 controls from the UK. Despite identifying seven exonic variants with a minor allele frequency (MAF) >0.01, none was significantly associated with schizophrenia (minimum P = 0.054), showing that the strong association we previously reported in this sample is not the result of association to a common functional variant located within the exonic sequence of any of the three major DTNBP1 transcripts. We also sought additional support for DTNBP1 as a susceptibility gene for schizophrenia by testing the hypothesis that rare exonic highly penetrant variants exist at the DTNBP1 locus. Our analysis failed to identify an enrichment of rare functional variants in the patients compared to the controls. Taken as a whole, this data demonstrate that if DTNBP1 is a risk gene for schizophrenia then risk is not conferred by mutations that affect the structure of the dysbindin protein.

Maternal systemic primary carnitine deficiency uncovered by newborn screening: clinical, biochemical, and molecular aspects

BACKGROUND

Systemic primary carnitine deficiency is an autosomal recessive disorder of the carnitine cycle caused by mutations in the SLC22A5 gene that encodes the carnitine transporter, organic cation transporter. Systemic primary carnitine deficiency typically presents in childhood with either metabolic decompensation or cardiomyopathy. We report five families in which low free carnitine levels in the infants' newborn screening have led to the diagnosis of maternal systemic primary carnitine deficiency.

METHODS

Blood samples from the infants and /or their family members were used to extract the DNA. The entire coding regions of the SLC22A5 gene were sequenced. The clinical data were obtained from the referring metabolic specialists.

RESULT

Sequencing the SLC22A5 gene allowed molecular confirmation with identification of three novel mutations: c.1195C>T (p.R399W), c.1324_1325GC>AT (p.A442I), and c.43G>T (p.G15W). All infants were asymptomatic at the time of diagnosis, and one was found to have systemic primary carnitine deficiency. Three mothers are asymptomatic, one had decreased stamina during pregnancy, and one has mild fatigability and developed preeclampsia.

DISCUSSION

These findings provide further evidence that systemic primary carnitine deficiency presents with a broad clinical spectrum from a metabolic decompensation in infancy to an asymptomatic adult. The maternal systemic primary carnitine deficiency was uncovered by the newborn screening results supporting the previous notion that newborn screening can identify some of the maternal inborn errors of metabolism. It also emphasizes the importance of maternal evaluation after identification of a low free carnitine level in the newborn screening.

Identifying sequence variants in the human mitochondrial genome using high-resolution melt (HRM) profiling

Identifying mitochondrial DNA (mtDNA) sequence variants in human diseases is complicated. Many pathological mutations are heteroplasmic, with the mutant allele represented at highly variable percentages. High-resolution melt (HRM or HRMA) profiling was applied to comprehensive assessment of the mitochondrial genome and targeted assessment of recognized pathological mutations. The assay panel providing comprehensive coverage of the mitochondrial genome utilizes 36 overlapping fragments (301-658 bp) that employ a common PCR protocol. The comprehensive assay identified heteroplasmic mutation in 33 out of 33 patient specimens tested. Allele fraction among the specimens ranged from 1 to 100%. The comprehensive assay panel was also used to assess 125 mtDNA specimens from healthy donors, which identified 431 unique sequence variants. Utilizing the comprehensive mtDNA panel, the mitochondrial genome of a patient specimen may be assessed in less than 1 day using a single 384-well plate or two 96-well plates. Specific assays were used to identify the myopathy, encephalopathy, lactic acidosis and stroke-like episodes (MELAS) mutation m.3243A>G, myoclonus epilepsy, ragged red fibers (MERRF) mutation m.8344A>G, and m.1555A>G associated with aminoglycoside hearing loss. These assays employ a calibrated, amplicon-based strategy that is exceedingly simple in design, utilization, and interpretation, yet provides sensitivity to detect variants at and below 10% heteroplasmy. Turnaround time for the genotyping tests is about 1 hr.

Assessing high-resolution melt curve analysis for accurate detection of gene variants in complex DNA fragments

Mutation detection has, until recently, relied heavily on the use of gel-based methods that can be both time consuming and difficult to design. Nongel-based systems are therefore important to increase simplicity and improve turn around time without compromising assay sensitivity and accuracy, especially in the diagnostic/clinical setting. In this study, we assessed the latest of the nongel-based methods, namely high-resolution melt (HRM) curve analysis. HRM is a closed-tube method that incorporates a saturating dye during DNA amplification followed by a monitoring of the change in fluorescence as the DNA duplex is denatured by an increasing temperature. We assessed 10 amplicons derived from eight genes, namely SERPINA1, CXCR7, MBL, VDR, NKX3A, NPY, TP53, and HRAS using two platforms, the LightScanner System using LC Green PLUS DNA binding dye (Idaho Technology, Salt Lake City, UT, USA) and the LightCycler 480 using the HRM Master dye (Roche Diagnostics, Indianapolis, IN, USA). DNA variants (mutations or polymorphims) were previously identified using denaturing gradient gel electrophoresis (DGGE) a method, similarly to HRM, based upon the different melting properties of double-stranded DNA. Fragments were selected based on variant and fragment complexity. This included the presence of multiple sequence variants, variants in alternate orientations, and single or multiple variants (constitutional or somatic) in GC-rich fragments. We demonstrate current limitations of the HRM method for the analysis of complex DNA regions and call for caution when using HRM as the sole method to make a clinical diagnosis based on genetic analysis.

Mutation scanning using high-resolution melting

Mutation scanning techniques are used to detect sequence variants without the need for prior knowledge of the identity or precise location of the variant, in contrast with genotyping techniques, which determine the status of a specific variant. High-resolution melting is a recently developed method that shows great potential as a mutation scanning technique. Sensitivity and specificity for mutation detection are extremely high and the technique also has advantages of cost and throughput. Practical considerations for successful mutation scanning by high-resolution melting are also discussed in this review.

Genetic variation in the urea cycle: a model resource for investigating key candidate genes for common diseases

The urea cycle is the primary means of nitrogen metabolism in humans and other ureotelic organisms. There are five key enzymes in the urea cycle: carbamoyl-phosphate synthetase 1 (CPS1), ornithine transcarbamylase (OTC), argininosuccinate synthetase (ASS1), argininosuccinate lyase (ASL), and arginase 1 (ARG1). Additionally, a sixth enzyme, N-acetylglutamate synthase (NAGS), is critical for urea cycle function, providing CPS1 with its necessary cofactor. Deficiencies in any of these enzymes result in elevated blood ammonia concentrations, which can have detrimental effects, including central nervous system dysfunction, brain damage, coma, and death. Functional variants, which confer susceptibility for disease or dysfunction, have been described for enzymes within the cycle; however, a comprehensive screen of all the urea cycle enzymes has not been performed. We examined the exons and intron/exon boundaries of the five key urea cycle enzymes, NAGS, and two solute carrier transporter genes (SLC25A13 and SLC25A15) for sequence alterations using single-stranded conformational polymorphism (SSCP) analysis and high-resolution melt profiling. SSCP was performed on a set of DNA from 47 unrelated North American individuals with a mixture of ethnic backgrounds. High-resolution melt profiling was performed on a nonoverlapping DNA set of either 47 or 100 unrelated individuals with a mixture of backgrounds. We identified 33 unarchived polymorphisms in this screen that potentially play a role in the variation observed in urea cycle function. Screening all the genes in the pathway provides a catalog of variants that can be used in investigating candidate diseases.

High-Resolution Melting Curve Analysis of Genomic and Whole-Genome Amplified DNA

Background: High-resolution melting curve analysis is an accurate method for mutation detection in genomic DNA. Few studies have compared the performance of high-resolution DNA melting curve analysis (HRM) in genomic and whole-genome amplified (WGA) DNA.

Methods: In 39 paired genomic and WGA samples, 23 amplicons from 9 genes were PCR amplified and analyzed by high-resolution melting curve analysis using the 96-well LightScanner (Idaho Technology). We used genotyping and bidirectional resequencing to verify melting curve results.

Results: Melting patterns were concordant between the genomic and WGA samples in 823 of 863 (95%) analyzed sample pairs. Of the discordant patterns, there was an overrepresentation of alternate melting curve patterns in the WGA samples, suggesting the presence of a mutation (false positives). Targeted resequencing in 135 genomic and 136 WGA samples revealed 43 single nucleotide polymorphisms (SNPs). All SNPs detected in genomic samples were also detected in WGA. Additional genotyping and sequencing allowed the classification of 628 genomic and 614 WGA amplicon samples. Heterozygous variants were identified by non–wild-type melting pattern in 98% of genomic and 97% of WGA samples (P = 0.11). Wild types were correctly classified in 99% of genomic and 91% of WGA samples (P &lt; 0.001).

Conclusions: In WGA DNA, high-resolution DNA melting curve analysis is a sensitive tool for SNP discovery through detection of heterozygote variants; however, it may misclassify a greater number of wild-type samples.

Validation of high-resolution DNA melting analysis for mutation scanning of the cystic fibrosis transmembrane conductance regulator (CFTR) gene

High-resolution melting analysis of polymerase chain reaction products for mutation scanning, which began in the early 2000s, is based on monitoring of the fluorescence released during the melting of double-stranded DNA labeled with specifically developed saturation dye, such as LC-Green. We report here the validation of this method to scan 98% of the coding sequence of the cystic fibrosis transmembrane conductance regulator (CFTR) gene. We designed 32 pairs of primers to amplify and analyze the 27 exons of the gene. Thanks to the addition of a small GC-clamp at the 5' ends of the primers, one single melting domain and one identical annealing temperature were obtained to co-amplify all of the fragments. A total of 307 DNA samples, extracted by the salt precipitation method, carrying 221 mutations and 21 polymorphisms, plus 20 control samples free from variations (confirmed by denaturing high-performance liquid chromatography analysis), was used. With the conditions described in this study, 100% of samples that carry heterozygous mutations and 60% of those with homozygous mutations were identified. The study of a cohort of 136 idiopathic chronic pancreatitis patients enabled us to prospectively evaluate this technique. Thus, high-resolution melting analysis is a robust and sensitive single-tube technique for screening mutations in a gene and promises to become the gold standard over denaturing high-performance liquid chromatography, particularly for highly mutated genes such as CFTR, and appears suitable for use in reference diagnostic laboratories.

Cardiomyopathy and carnitine deficiency

Carnitine is essential for the transfer of long-chain fatty acids across the mitochondrial membrane for subsequent beta-oxidation. A defect in the high-affinity carnitine transporter OCTN2 causes autosomal recessive primary carnitine deficiency that can present with hypoketotic hypoglycemia, mainly in infancy or cardiomyopathy. Heterozygotes for primary carnitine deficiency can have mildly reduced plasma carnitine levels and can develop benign cardiac hypertrophy. In animal models, heterozygotes for this disease have a higher incidence of cardiomyopathy with aging. This study tested whether heterozygosity for primary carnitine deficiency was associated with cardiomyopathy. The frequency of mutations in the SLC22A5 gene encoding the OCTN2 carnitine transporter was determined in 324 patients with cardiomyopathy and compared to that described in the normal population. Missense variations identified in normal controls and patients with cardiomyopathy were expressed in Chinese Hamster Ovary cells to confirm a functional effect. Exons 2-10 of the SLC22A5 gene were amplified by PCR in the presence of LCGreen I and analyzed by dye-binding/high-resolution thermal denaturation. Exon 1 of the gene was sequenced in all patients. Heterozygosity for a few variants (L144F, T264M, I312V, E317K, and R488H) was found in 6/324 patients with cardiomyopathy. Expression of these variants in CHO cells indicated that T264M decreased, E317K increased, while L144F, I312V, and R488H did not significantly affect carnitine transport. Expression in CHO cells of all the variants identified in a normal population indicated that only two had a functional effect (L17F and Y449D), while L144F, V481I, V481F, M530V, and P549S did not change significantly carnitine transport. The frequency of variants affecting carnitine transport was 2/324 patients with cardiomyopathy (0.61%) not significantly different from frequency of 3/270 (1.11%) in the general population. These results indicate that heterozygosity for primary carnitine deficiency is not more frequent in patients with unselected types of cardiomyopathy and is unlikely to be an important cause of cardiomyopathy in humans.

Base-pair neutral homozygotes can be discriminated by calibrated high-resolution melting of small amplicons

Genotyping by high-resolution melting analysis of small amplicons is homogeneous and simple. However, this approach can be limited by physical and chemical components of the system that contribute to intersample melting variation. It is challenging for this method to distinguish homozygous G::C from C::G or A::T from T::A base-pair neutral variants, which comprise ∼16% of all human single nucleotide polymorphisms (SNPs). We used internal oligonucleotide calibrators and custom analysis software to improve small amplicon (42–86 bp) genotyping on the LightScanner®. Three G/C (PAH c.1155C>G, CHK2 c.1-3850G>C and candidate gene BX647987 c.261+22,290C>G) and three T/A (CPS1 c.3405-29A>T, OTC c.299-8T>A and MSH2 c.1511-9A>T) human single nucleotide variants were analyzed. Calibration improved homozygote genotyping accuracy from 91.7 to 99.7% across 1105 amplicons from 141 samples for five of the six targets. The average T_m standard deviations of these targets decreased from 0.067°C before calibration to 0.022°C after calibration. We were unable to generate a small amplicon that could discriminate the BX647987 c.261+22,290C>G (rs1869458) SNP, despite reducing standard deviations from 0.086°C to 0.032°C. Two of the sites contained symmetric nearest neighbors adjacent to the SNPs. Unexpectedly, we were able to distinguish these homozygotes by T_m even though current nearest neighbor models predict that the two homozygous alleles would be identical.

High resolution melting applications for clinical laboratory medicine

Separation of the two strands of DNA with heat (melting) is a fundamental property of DNA that is conveniently monitored with fluorescence. Conventional melting is performed after PCR on any real-time instrument to monitor product purity (dsDNA dyes) and sequence (hybridization probes). Recent advances include high resolution instruments and saturating DNA dyes that distinguish many different species. For example, mutation scanning (identifying heterozygotes) by melting is closed-tube and has similar or superior sensitivity and specificity compared to methods that require physical separation. With high resolution melting, SNPs can be genotyped without probes and more complex regions can be typed with unlabeled hybridization probes. Highly polymorphic HLA loci can be melted to establish sequence identity for transplantation matching. Simultaneous genotyping with one or more unlabeled probes and mutation scanning of the entire amplicon can be performed at the same time in the same tube, vastly decreasing or eliminating the need for re-sequencing in genetic analysis. High resolution PCR product melting is homogeneous, closed-tube, rapid (1-5 min), non-destructive and does not require covalently-labeled fluorescent probes. In the clinical laboratory, it is an ideal format for in-house testing, with minimal cost and time requirements for new assay development.

High-resolution DNA melting analysis for simple and efficient molecular diagnostics

High-resolution melting of DNA is a simple solution for genotyping, mutation scanning and sequence matching. The melting profile of a PCR product depends on its GC content, length, sequence and heterozygosity and is best monitored with saturating dyes that fluoresce in the presence of double-stranded DNA. Genotyping of most variants is possible by the melting temperature of the PCR products, while all variants can be genotyped with unlabeled probes. Mutation scanning and sequence matching depend on sequence differences that result in heteroduplexes that change the shape of the melting curve. High-resolution DNA melting has several advantages over other genotyping and scanning methods, including an inexpensive closed tube format that is homogenous, accurate and rapid. Owing to its simplicity and speed, the method is a good fit for personalized medicine as a rapid, inexpensive method to predict therapeutic response.

Quadruplex Genotyping of F5, F2, and MTHFR Variants in a Single Closed Tube by High-Resolution Amplicon Melting

Background: Multiplexed amplicon melting is a closed-tube method for genotyping that does not require probes, real-time analysis, asymmetric PCR, or allele-specific PCR; however, correct differentiation of homozygous mutant and wild-type samples by melting temperature (Tm) analysis requires high-resolution melting analysis and controlled reaction conditions.

Methods: We designed 4 amplicons bracketing the F5 [coagulation factor V (proaccelerin, labile factor)] 1691G&gt;A, MTHFR (NADPH) 1298A&gt;C, MTHFR 677C&gt;T, and F2 [coagulation factor II (thrombin)] 20210G&gt;A gene variants to melt at different temperatures by varying amplicon length and adding GC- or AT-rich 5′ tails to selected primers. We used rapid-cycle PCRs with cycles of 19–23 s in the presence of a saturating DNA dye and temperature-correction controls and then conducted a high-resolution melting analysis. Heterozygotes were identified at each locus by curve shape, and homozygous genotypes were assigned by Tm. We blinded samples previously genotyped by other methods before analysis with the multiplex melting assay (n = 110).

Results: All samples were correctly genotyped with the exception of 7 MTHFR 1298 samples with atypical melting profiles that could not be assigned. Sequencing revealed that these 5 heterozygotes and 2 homozygotes contained the unexpected sequence variant MTHFR 1317T&gt;C. The use of temperature-correction controls decreased the Tm SD within homozygotes by a mean of 38%.

Conclusion: Rapid-cycle PCR with high-resolution melting analysis allows simple and accurate multiplex genotyping to at least a factor of 4.

Streamlined assessment of gene variants by high resolution melt profiling utilizing the ornithine transcarbamylase gene as a model system

Ornithine transcarbamylase (OTC) deficiency is an X-linked, semidominant genetic disorder and the most prevalent inherited defect of the urea cycle. Molecular genetic testing of the OTC gene is critically important for clinical diagnosis, carrier testing, and prenatal diagnosis. Private mutations are observed throughout the OTC gene with more than 340 reported disease-causing mutations. High-resolution melt profiling was adapted to perform homogeneous analysis of the 10 coding regions and their intronic flanks in a 96-well plate format. The 10 DNA fragments ranging from 146 bp to 266 bp are amplified in a PCR run. A common analysis condition simultaneously generates melting profiles from all 10 fragments. To streamline analysis, deviant profiles resulting from common polymorphic variants are triaged using redundant assessment with melt profile controls in selected whole-exon assays and a separate multiplex genotyping assay. The test is further streamlined by recovering dye-stained amplification product from the melt profiling plate to serve as DNA sequencing template. Described herein is the comprehensive analysis of the OTC gene in 23 OTC-deficient patients. This system provides a rapid means to localize sequence variants, markedly reducing the need for DNA sequencing, and is applicable to other genes and disorders.

Closed-tube genotyping of apolipoprotein E by isolated-probe PCR with multiple unlabeled probes and high-resolution DNA melting analysis

Isolated-probe PCR (IP-PCR) is a method that combines asymmetric PCR, unlabeled probes, and high-resolution DNA melting while maintaining a closed tube system. A double-stranded DNA (dsDNA) dye LCGreen I was used to detect the unlabeled probes. LCGreen I is also used to detect the 277-base pair PCR product peak as an internal amplification control. To accomplish this, IP-PCR separates the asymmetric PCR amplification step and the detection step of the unlabeled probes. This prevents the probes from interfering with the amplification of the DNA target. The samples are then melted using a high-resolution DNA melting instrument: the HR-1. The closed tube system virtually eliminates PCR product contamination or sample carryover The target apolipoprotein E (APOE) was chosen to test the IP-PCR technique. APOE contains two single nucleotide polymorphisms (SNPs) located 139 base pairs apart in a GC-rich region of the human genome. The results from this study show that the IP-PCR technique was able to determine the correct APOE genotype for each of the 101 samples. The IP-PCR technique should also be useful in detecting SNPs in other high-GC regions of the human genome.

CDKN2A and CDK4 variants in Latvian melanoma patients: analysis of a clinic-based population

Germline mutations of the CDKN2A and CDK4 genes explain a significant proportion of familial melanoma. To date, there have been few published estimations of the prevalence of such mutations in sporadic melanoma patients. In this study, we investigated CDKN2A and CDK4 exon 2 for germline mutations in 125 consecutive cutaneous malignant melanoma patients recruited through the Latvian Oncological Center, using amplicon melting analysis and sequencing. No disease-related CDKN2A germline mutations were identified in any of the melanoma patients analysed but the previously described CDK4 mutation, Arg24His, was found in one patient with a family history of melanoma. CDKN2A polymorphisms were studied as putative low penetrance susceptibility genes. The proportion of cases with polymorphisms in this Latvian melanoma population was Ala148Thr (c.442G>A) (6%), 500 C/G (c.*29C>G) (18%), and 540 C/T (c.*69C>T) (20%); however, only the frequency of the Ala148Thr polymorphism was higher in melanoma patients than in 203 controls (6 versus 1%, P=0.03). Ala148Thr has also been reported in association with melanoma in a Polish series but not in an English series. We therefore examined the Ala148Thr carrier's haplotype in 10 Latvian and 39 Polish samples. No significant difference was seen between these populations and the predominant haplotype observed in English samples, giving no indication that the discrepancy could be explained by population differences in linkage disequilibrium. In summary, our results show that germline mutations at the CDKN2A locus are rare in sporadic melanoma in Latvia. The study does, however, provide some additional evidence for a role for the CDKN2A polymorphism Ala148Thr as a low penetrance susceptibility gene. The detected CDK4 exon 2 mutation was found in only the seventh family identified worldwide with a germline CDK4 mutation.

Mutations in the phenylalanine hydroxylase gene identified in 95 patients with phenylketonuria using novel systems of mutation scanning and specific genotyping based upon thermal melt profiles

Phenylketonuria (PKU, MIM 261600; EC 1.14.16.1) results from mutations in the phenylalanine hydroxylase (PAH) gene. Newborn metabolic disease screening uses blood dried on filter paper (DBS) to prospectively identify candidate newborns affected with PKU via an elevated concentration of phenylalanine. However, it is then important to confirm the specific category of PKU since classical PKU requires a stringent diet while milder categories may not require diet and a very important BH4-responsive category may be treated with the PAH cofactor 6R-tetrahydrobiopterin (BH4). Since there is a close genotype-phenotype correlation in PKU, determining the PAH genotype can be extremely important for therapy as well as prognosis. A simple and rapid method of accurately determining the PAH genotype would be a valuable addition to the diagnosis of PKU. Described herein is a means to identify variants in the PAH gene using high-resolution melt profiling, which compares the thermal denaturation profile of a patient sample to that of a control. Regions where the patient and control samples produce a common profile were not further evaluated, while those regions where the patient profile deviates from the control were assessed by DNA sequencing. Additionally described is a scheme utilizing redundant analysis with melt profile controls and a novel multiplex genotyping assay to triage deviation owing to known polymorphisms. Two mutations were identified in 93 of the 95 patients assessed and in the remaining two patients a single mutation was identified. Melt profiling provided 99% sensitivity to identify sequence variants in the PAH gene.

Identifying Common Genetic Variants by High-Resolution Melting

Background: Heteroduplex scanning techniques usually detect all heterozygotes, including common variants not of clinical interest.

Methods: We conducted high-resolution melting analysis on the 24 exons of the ACVRL1 and ENG genes implicated in hereditary hemorrhagic telangiectasia (HHT). DNA in samples from 13 controls and 19 patients was PCR amplified in the presence of LCGreen® I, and all 768 exons melted in an HR-1® instrument. We used 10 wild-type controls to identify common variants, and the remaining samples were blinded, amplified, and analyzed by melting curve normalization and overlay. Unlabeled probes characterized the sequence of common variants.

Results: Eleven common variants were associated with 8 of the 24 HHT exons, and 96% of normal samples contained at least 1 variant. As a result, the positive predictive value (PPV) of a heterozygous exon was low (31%), even in a population of predominantly HHT patients. However, all common variants produced unique amplicon melting curves that, when considered and eliminated, resulted in a PPV of 100%. In our blinded study, 3 of 19 heterozygous disease-causing variants were missed; however, 2 were clerical errors, and the remaining false negative would have been identified by difference analysis.

Conclusions: High-resolution melting analysis is a highly accurate heteroduplex scanning technique. With many exons, however, use of single-sample instruments may lead to clerical errors, and routine use of difference analysis is recommended. Common variants can be identified by their melting curve profiles and genotyped with unlabeled probes, greatly reducing the false-positive results common with scanning techniques.

Detection of EGFR mutations in archived cytologic specimens of non-small cell lung cancer using high-resolution melting analysis

Mutations of the epidermal growth factor receptor (EGFR), particularly deletional mutations (DEL) in exon 19 and L858R in exon 21, are reportedly correlated with clinical outcome in patients with non-small cell lung cancer (NSCLC) receiving the EGFR tyrosine kinase inhibitors gefitinib and erlotinib, suggesting that detection of EGFR mutations would have an important role in clinical decision making. We established and validated an easy, inexpensive, and rapid method for detecting DEL and L858R from cytologic material by high-resolution melting analysis (HRMA). Dilution for sensitivity studies revealed that DEL and L858R were detectable in the presence of at least 10% and 0.1% EGFR-mutant cells, respectively. We analyzed 37 archived cytological slides of specimens from 29 patients with advanced NSCLC and compared the results with direct sequencing data obtained previously. Of 37 samples, 34 (92%) yielded consistent results with direct sequencing, 2 were false negative, and 1 was indeterminate. The sensitivity of this analysis was 90% (19/21) and specificity, 100% (15/15). These results suggest that HRMA of archived cytologic specimens of advanced NSCLC is useful for detecting EGFR mutations in clinical practice.

High-resolution characterization of linkage disequilibrium structure and selection of tagging single nucleotide polymorphisms: application to the cholesteryl ester transfer protein gene

Full characterization of intragenic variation may improve candidate gene associations. This study selected tagging (t) single nucleotide polymorphisms (SNPs) to comprehensively represent genetic variability in the cholesteryl ester transfer protein (CETP) gene. Nineteen SNPs were identified in 50 unrelated individuals in the SNP discovery phase, and 13 intronic SNPs were added from the literature. These 32 SNPs were genotyped in 339 apparently healthy individuals and 190 coronary artery disease (CAD) patients. Using phased haplotypes, linkage disequilibrium (LD) structure was characterized and tSNPs selected using a principal component analysis (PCA) method. In healthy individuals, seven LD groups were identified that accounted for 93.4% of the observed genetic variation. These LD groups highlighted a complex LD structure for CETP, including both recombination and mutation, and eleven tSNPs were selected. Among CAD patients the results were essentially the same. Results from PCA using diploid genotype data were reasonably comparable. Finally, the selected tSNPs successfully represented the association evidence discovered for all of the other SNPs studied. This study provides an optimal set of tSNPs for association analyses of CETP. The observed complexity of LD structure highlights the importance of using methods, such as PCA, that allow for multiple dynamics in intragenic LD structure.

Pharmacological rescue of carnitine transport in primary carnitine deficiency

Primary carnitine deficiency is a recessive disorder caused by heterogeneous mutations in the SLC22A5 gene encoding the OCTN2 carnitine transporter. Here we extend mutational analysis to eight new families with this disorder. To determine the mechanism by which missense mutations impaired carnitine transport, the OCTN2 transporter was tagged with the green fluorescent protein and expressed in CHO cells. Analysis by confocal microscopy indicated that several missense mutants (M1I, R169W, T232 M, G242 V, S280F, R282Q, W283R, A301D, W351R, R399Q, T440 M, E452 K, and T468R) matured normally to the plasma membrane. By contrast, other mutations (including R19P, DeltaF22, R83L, S280F, P398L, Y447C, and A142S/R488 H) caused significant retention of the mutant OCTN2 transporter in the cytoplasm. Failed maturation to the plasma membrane is a common mechanism in disorders affecting membrane transporters/ion channels, including cystic fibrosis. To correct this defect, we tested whether drugs reducing the efficiency of protein degradation in the endoplasmic reticulum (ER) (phenylbutyrate, curcumin) or capable of binding the OCTN2 carnitine transporter (verapamil, quinidine) could improve carnitine transport. Prolonged incubation with phenylbutyrate, quinidine, and verapamil partially stimulated carnitine transport, while curcumin was ineffective. These results indicate that OCTN2 mutations can affect carnitine transport by impairing maturation of transporters to the plasma membrane. Pharmacological therapy can be effective in partially restoring activity of mutant transporters.

Disorders of carnitine transport and the carnitine cycle

Carnitine plays an essential role in the transfer of long-chain fatty acids across the inner mitochondrial membrane. This transfer requires enzymes and transporters that accumulate carnitine within the cell (OCTN2 carnitine transporter), conjugate it with long chain fatty acids (carnitine palmitoyl transferase 1, CPT1), transfer the acylcarnitine across the inner plasma membrane (carnitine-acylcarnitine translocase, CACT), and conjugate the fatty acid back to Coenzyme A for subsequent beta oxidation (carnitine palmitoyl transferase 2, CPT2). Deficiency of the OCTN2 carnitine transporter causes primary carnitine deficiency, characterized by increased losses of carnitine in the urine and decreased carnitine accumulation in tissues. Patients can present with hypoketotic hypoglycemia and hepatic encephalopathy, or with skeletal and cardiac myopathy. This disease responds to carnitine supplementation. Defects in the liver isoform of CPT1 present with recurrent attacks of fasting hypoketotic hypoglycemia. The heart and the muscle, which express a genetically distinct form of CPT1, are usually unaffected. These patients can have elevated levels of plasma carnitine. CACT deficiency presents in most cases in the neonatal period with hypoglycemia, hyperammonemia, and cardiomyopathy with arrhythmia leading to cardiac arrest. Plasma carnitine levels are extremely low. Deficiency of CPT2 present more frequently in adults with rhabdomyolysis triggered by prolonged exercise. More severe variants of CPT2 deficiency present in the neonatal period similarly to CACT deficiency associated or not with multiple congenital anomalies. Treatment for deficiency of CPT1, CPT2, and CACT consists in a low-fat diet supplemented with medium chain triglycerides that can be metabolized by mitochondria independently from carnitine, carnitine supplements, and avoidance of fasting and sustained exercise.

Mutation scanning of the RET protooncogene using high-resolution melting analysis

BACKGROUND

Single-base pair missense mutations in exons 10, 11, 13, 14, 15, and 16 of the RET protooncogene are associated with the autosomal dominant multiple endocrine neoplasia type 2 (MEN2) syndromes: MEN2A, MEN2B, and familial medullary thyroid carcinoma. The current widely used approach for RET mutation detection is sequencing of the exons.

METHODS

Because RET mutations are rare and the majority are heterozygous mutations, we investigated RET mutation detection by high-resolution amplicon melting analysis. This mutation scanning technique uses a saturating double-stranded nucleic acid binding dye, LCGreen, and the high-resolution melter, HR-1, to detect heterozygous and homozygous sequence variations. Mutant genotypes are distinguished from the wild-type genotype by an altered amplicon melting curve shape or position.

RESULTS

Samples of 26 unique RET mutations, 4 nonpathogenic polymorphisms, or the wild-type genotype were available for this study. The developed RET mutation-scanning assay differentiated RET sequence variations from the wild-type genotype by altered derivative melting curve shape or position. A blinded study of 80 samples (derived from the 35 mutant, polymorphism, or wild-type samples) demonstrated that 100% of RET sequence variations were differentiated from wild-type samples. For exons 11 and 13, the nonpathogenic polymorphisms could be distinguished from the pathogenic RET mutations. Some RET mutations could be directly genotyped by the mutation scanning assay because of unique derivative melting curve shapes.

CONCLUSION

RET high-resolution amplicon melting analysis is a sensitive, closed-tube assay that can detect RET protooncogene sequence variations.

Quantitative heteroduplex analysis for single nucleotide polymorphism genotyping

High-resolution melting of polymerase chain reaction (PCR) products can detect heterozygous mutations and most homozygous mutations without electrophoretic or chromatographic separations. However, some homozygous single nucleotide polymorphism (SNPs) have melting curves identical to that of the wild-type, as predicted by nearest neighbor thermodynamic models. In these cases, if DNA of a known reference genotype is added to each unknown before PCR, quantitative heteroduplex analysis can differentiate heterozygous, homozygous, and wild-type genotypes if the fraction of reference DNA is chosen carefully. Theoretical calculations suggest that melting curve separation is proportional to heteroduplex content difference and that the addition of reference homozygous DNA at one seventh of total DNA results in the best discrimination between the three genotypes of biallelic SNPs. This theory was verified experimentally by quantitative analysis of both high-resolution melting and temperature-gradient capillary electrophoresis data. Reference genotype proportions other than one seventh of total DNA were suboptimal and failed to distinguish some genotypes. Optimal mixing before PCR followed by high-resolution melting analysis permits genotyping of all SNPs with a single closed-tube analysis.

High-Resolution DNA Melting Analysis for Simultaneous Mutation Scanning and Genotyping in Solution

Background: High-resolution DNA melting analysis with saturation dyes for either mutation scanning of PCR products or genotyping with unlabeled probes has been reported. However, simultaneous PCR product scanning and probe genotyping in the same reaction has not been described.

Methods: Asymmetric PCR was performed in the presence of unlabeled oligonucleotide probes and a saturating fluorescent DNA dye. High-resolution melting curves for samples in either capillaries (0.3 °C/s) or microtiter format (0.1 °C/s) were generated in the same containers used for amplification. Melting curves of the factor V Leiden single-nucleotide polymorphism (SNP) and several mutations in exons 10 and 11 of the cystic fibrosis transconductance regulator gene were analyzed for both PCR product and probe melting transitions.

Results: Independent verification of genotype for simple SNPs was achieved by either PCR product or probe melting transitions. Two unlabeled probes in one reaction could genotype many sequence variants with simultaneous scanning of the entire PCR product. For example, analysis of both product and probe melting transitions genotyped ΔF508, ΔI507, Q493X, I506V, and F508C variants in exon 10 and G551D, G542X, and R553X variants in exon 11. Unbiased hierarchal clustering of the melting transitions identified the specific sequence variants.

Conclusions: When DNA melting is performed rapidly and observed at high resolution with saturating DNA dyes, it is possible to scan for mutations and genotype at the same time within a few minutes after amplification. The method is no more complex than PCR and may reduce the need for resequencing.