A weight of evidence approach for bioaccumulation assessment

Advancing exposure assessment approaches to improve wildlife risk assessment

The exposure assessment component of a Wildlife Ecological Risk Assessment aims to estimate the magnitude, frequency, and duration of exposure to a chemical or environmental contaminant, along with characteristics of the exposed population. This can be challenging in wildlife as there is often high uncertainty and error caused by broad-based, interspecific extrapolation and assumptions often because of a lack of data. Both the US Environmental Protection Agency (USEPA) and European Food Safety Authority (EFSA) have broadly directed exposure assessments to include estimates of the quantity (dose or concentration), frequency, and duration of exposure to a contaminant of interest while considering "all relevant factors." This ambiguity in the inclusion or exclusion of specific factors (e.g., individual and species-specific biology, diet, or proportion time in treated or contaminated area) can significantly influence the overall risk characterization. In this review, we identify four discrete categories of complexity that should be considered in an exposure assessment-chemical, environmental, organismal, and ecological. These may require more data, but a degree of inclusion at all stages of the risk assessment is critical to moving beyond screening-level methods that have a high degree of uncertainty and suffer from conservatism and a lack of realism. We demonstrate that there are many existing and emerging scientific tools and cross-cutting solutions for tackling exposure complexity. To foster greater application of these methods in wildlife exposure assessments, we present a new framework for risk assessors to construct an "exposure matrix." Using three case studies, we illustrate how the matrix can better inform, integrate, and more transparently communicate the important elements of complexity and realism in exposure assessments for wildlife. Modernizing wildlife exposure assessments is long overdue and will require improved collaboration, data sharing, application of standardized exposure scenarios, better communication of assumptions and uncertainty, and postregulatory tracking. Integr Environ Assess Manag 2024;20:674-698. © 2023 SETAC.

Predicting the Accumulation of Ionizable Pharmaceuticals and Personal Care Products in Aquatic and Terrestrial Organisms

The extent to which chemicals bioaccumulate in aquatic and terrestrial organisms represents a fundamental consideration for chemicals management efforts intended to protect public health and the environment from pollution and waste. Many chemicals, including most pharmaceuticals and personal care products (PPCPs), are ionizable across environmentally relevant pH gradients, which can affect their fate in aquatic and terrestrial systems. Existing mathematical models describe the accumulation of neutral organic chemicals and weak acids and bases in both fish and plants. Further model development is hampered, however, by a lack of mechanistic insights for PPCPs that are predominantly or permanently ionized. Targeted experiments across environmentally realistic conditions are needed to address the following questions: (1) What are the partitioning and sorption behaviors of strongly ionizing chemicals among species? (2) How does membrane permeability of ions influence bioaccumulation of PPCPs? (3) To what extent are salts and associated complexes with PPCPs influencing bioaccumulation? (4) How do biotransformation and other elimination processes vary within and among species? (5) Are bioaccumulation modeling efforts currently focused on chemicals and species with key data gaps and risk profiles? Answering these questions promises to address key sources of uncertainty for bioaccumulation modeling of ionizable PPCPs and related contaminants. Environ Toxicol Chem 2024;43:502-512. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Are current regulatory log Kow cut-off values fit-for-purpose as a screening tool for bioaccumulation potential in aquatic organisms?

Persistent, Bioaccumulative and Toxic (PBT) and very Persistent and very Bioaccumulative (vPvB) are regulatory hazard categories that have been set to manage the possible risks to humans and the environment from these chemicals. In industrial chemicals regulations, their aquatic Bioaccumulation potential is usually assessed first with a screening based on the octanol/water partition coefficient (Kow). However, current log Kow cut-off values triggering classification, categorisation and/or further fish bioconcentration testing are not harmonised worldwide, and they have never been assessed for their regulatory relevance. In this study, the experimentally determined log Kow and fish bioconcentration factors (BCF) of 532 chemicals were compared. While the analysis underlined the robustness of using log Kow as a screening tool (5/532 were false negatives; log Kow: non-bioaccumulative, but BCF: bioaccumulative), it also demonstrated the conservatism of the cut-offs used worldwide. Indeed, many chemicals were deemed potentially Bioaccumulative based on log Kow when a fish bioaccumulation test showed no concern (false positives), therefore, leading to unnecessary use of vertebrate animals. Our analysis shows that the log Kow cut-off could be increased to 4.5 in all regions for all purposes without leading to a reduced protection of humans and the environment.

Statistical Post-Processing Method for Evaluating Bioaccumulation in Fish Due to Dietary Exposure in Japan

In 2018, the dietary exposure bioaccumulation fish test of the Organization for Economic Co-operation and Development Test Guideline No. 305 was introduced into Japan's Chemical Substances Control Law. The Japanese government has adopted a single definitive testing criterion for the absence of high bioaccumulation: the growth-corrected kinetic dietary magnification factor (BMFKg) must be less than 0.007. The aim of this study was to decrease regulatory restrictions in order to increase newly developed chemical substances and their subsequent approval of their manufacture and import, i.e., the present study was motivated by concerns over the criterion being too restrictive, rather than scientific concerns, such as uncertainty in criterion. We used statistical post-processing to assess the possibility of expanding the criteria for not being highly bioaccumulative. Based on our results, we proposed the criterion that the test substance should be considered not highly bioaccumulative if the following two conditions are met: (1) The ratio of the maximum to the minimum measured 5% lipid-standardized biomagnification factor at the end of the uptake phase (BMF5%, n = 5) for the test substance and reference substance should be less than 3.0, and (2) For the measured BMF5% of the test substance (n = 5), the probability that the next (the sixth) BMF5% is below 0.0334 should exceed 95% based on statistical post-processing. It is worth noting that the BMF5% values should only be applied for non-ionizable lipid soluble compounds. Application of our suggested approach to Japan implies that the criterion for chemical substances that are not highly bioaccumulative in the dietary exposure bioaccumulation fish test would be increased from 0.007 to 0.0149.

Advancing the weight of evidence approach to enable chemical environmental risk assessment for decision-making and achieving protection goals

The weight of evidence (WoE) approach conflates the aspects of quality, reliability, relevance, and consistency of data and information to systematically strengthen the body of evidence and enable credible communication and decision-making on chemical risk assessment. Between 2015 and 2019, the Society of Environmental Toxicology and Chemistry (SETAC) held several workshops in all the geographical units with scientists and managers from academia, government, and business sectors focusing on the chemical risk-assessment approach. This article summarizes the knowledge that informs the needs concerning application of WoE, especially in the context of developing countries. This effort supports the use of existing data and test strategies for assessing chemical toxicity, exposure, and risk, and highlights the critical process for risk assessors to convey and discuss information sufficiency and uncertainty mitigation strategy with risk managers. This article complements the four articles in the special series that provide a critical review of existing frameworks for chemical risk screening and management, and applications of the WoE approach for assessing exposure in the aquatic environment, prediction of fish toxicity, and bioaccumulation. Collectively, the articles exemplify the use of WoE approaches to evaluate chemicals that are data rich and/or data poor for decision-making. They integrate the WoE concepts and approaches into practical considerations and guidance, and help to scale the value of WoE in supporting sound chemical risk assessment and science-based policy implementation. Integr Environ Assess Manag 2023;19:1188-1191. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Weight of evidence tools in the prediction of acute fish toxicity

Acute fish toxicity (AFT) is a key endpoint in nearly all regulatory implementations of environmental hazard assessments of chemicals globally. Although it is an early tier assay, the AFT assay is complex and uses many juvenile fish each year for the registration and assessment of chemicals. Thus, it is imperative to seek animal alternative approaches to replace or reduce animal use for environmental hazard assessments. A Bayesian Network (BN) model has been developed that brings together a suite of lines of evidence (LoEs) to produce a probabilistic estimate of AFT without the testing of additional juvenile fish. Lines of evidence include chemical descriptors, mode of action (MoA) assignment, knowledge of algal and daphnid acute toxicity, and animal alternative assays such as fish embryo tests and in vitro fish assays (e.g., gill cytotoxicity). The effort also includes retrieval, assessment, and curation of quality acute fish toxicity data because these act as the baseline of comparison with model outputs. An ideal outcome of this effort would be to have global applicability, acceptance and uptake, relevance to predominant fish species used in chemical assessments, be expandable to allow incorporation of future knowledge, and data to be publicly available. The BN model can be conceived as having incorporated principles of tiered assessment and whose outcomes will be directed by the available evidence in combination with prior information. We demonstrate that, as additional evidence is included in the prediction of a given chemical's ecotoxicity profile, both the accuracy and the precision of the predicted AFT can increase. Ultimately an improved environmental hazard assessment will be achieved. Integr Environ Assess Manag 2023;19:1220-1234. © 2022 SETAC.

Cross-Species Evaluation of Bioaccumulation Thresholds for Air-Breathing Animals

In air-breathing organisms, an organic chemical's susceptibility to elimination via urinary excretion and respiratory exhalation can be judged on the basis of the octanol-water partition ratio (K_OW) and the octanol-air partition ratio (K_OA), respectively. Current regulations specify that chemicals with K_OW values of <10² and K_OA values of <10⁵ may be screened as non-bioaccumulative in air breathers. Here we used a model-based approach to evaluate whether these thresholds are consistent with a biomagnification factor of 1 for 141 different mammals, birds, and reptiles. Animals with lower rates of respiration (e.g., manatees and sloths) and those ingesting high-lipid diets (e.g., polar bears and carnivorous birds) were predicted to be able to biomagnify persistent chemicals with K_OA values of <10⁵. This was also observed for several temperate reptiles due to their lower respiration rates and internal temperatures. Protective K_OA thresholds were determined to be <10^4.85 for mammals, <10^4.60 for birds, <10^4.60 for reptiles at >25 °C, and <10^3.95 for reptiles at ≤25 °C. For all animals, urination alone was not efficient to prevent the biomagnification of any organic chemical. For chemicals with K_OW values of <10¹, we found that biomagnification of persistent chemicals was constrained by the water-air partition ratio (K_WA) rather than K_OA. Differences in physiology may need to be considered in bioaccumulation assessments of air-breathing species.

Category-Based Toxicokinetic Evaluations of Data-Poor Per- and Polyfluoroalkyl Substances (PFAS) using Gas Chromatography Coupled with Mass Spectrometry

Concern over per- and polyfluoroalkyl substances (PFAS) has increased as more is learned about their environmental presence, persistence, and bioaccumulative potential. The limited monitoring, toxicokinetic (TK), and toxicologic data available are inadequate to inform risk across this diverse domain. Here, 73 PFAS were selected for in vitro TK evaluation to expand knowledge across lesser-studied PFAS alcohols, amides, and acrylates. Targeted methods developed using gas chromatography-tandem mass spectrometry (GC-MS/MS) were used to measure human plasma protein binding and hepatocyte clearance. Forty-three PFAS were successfully evaluated in plasma, with fraction unbound (f_up) values ranging from 0.004 to 1. With a median f_up of 0.09 (i.e., 91% bound), these PFAS are highly bound but exhibit 10-fold lower binding than legacy perfluoroalkyl acids recently evaluated. Thirty PFAS evaluated in the hepatocyte clearance assay showed abiotic loss, with many exceeding 60% loss within 60 min. Metabolic clearance was noted for 11 of the 13 that were successfully evaluated, with rates up to 49.9 μL/(min × million cells). The chemical transformation simulator revealed potential (bio)transformation products to consider. This effort provides critical information to evaluate PFAS for which volatility, metabolism, and other routes of transformation are likely to modulate their environmental fates.

How error-prone bioaccumulation experiments affect the risk assessment of hydrophobic chemicals and what could be improved

Bioaccumulation is one of the three criteria for the PBT assessment of chemicals, where P stands for persistence, B for bioaccumulation, and T for toxicity, which is a cornerstone for the "Registration, Evaluation, Authorization, and Restriction of Chemicals" (REACH) in the EU. Registrants are required by REACH to submit data on bioaccumulation if the chemical is manufactured in and/or imported to the European Economic Area at more than 100 t/year. Most of the experimental bioaccumulation studies submitted were on the bioconcentration factor (BCF) and were conducted prior to 2012, before the OECD Test Guideline 305 on Bioaccumulation in Fish was updated. An analysis of the submitted data revealed that many of the experimental data, but also the data from QSARs and other calculation methods, underestimate the actual bioaccumulation potential of hydrophobic substances considerably. One of the main reasons in the nonexperimental studies is that the BCF is related there to the total concentration of the chemical in water and not to the dissolved chemical concentration. There is therefore an urgent need to reassess the bioaccumulation potential of the hydrophobic substances registered under REACH. Based on the model calculations in the present study, between 332 and 584 substances that are registered under REACH are likely to bioaccumulate in the aquatic environment-many more than have so far been identified in the B assessment. Integr Environ Assess Manag 2023;19:792-803. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

QSAR Models for the Prediction of Dietary Biomagnification Factor in Fish

Xenobiotics released in the environment can be taken up by aquatic and terrestrial organisms and can accumulate at higher concentrations through the trophic chain. Bioaccumulation is therefore one of the PBT properties that authorities require to assess for the evaluation of the risks that chemicals may pose to humans and the environment. The use of an integrated testing strategy (ITS) and the use of multiple sources of information are strongly encouraged by authorities in order to maximize the information available and reduce testing costs. Moreover, considering the increasing demand for development and the application of new approaches and alternatives to animal testing, the development of in silico cost-effective tools such as QSAR models becomes increasingly important. In this study, a large and curated literature database of fish laboratory-based values of dietary biomagnification factor (BMF) was used to create externally validated QSARs. The quality categories (high, medium, low) available in the database were used to extract reliable data to train and validate the models, and to further address the uncertainty in low-quality data. This procedure was useful for highlighting problematic compounds for which additional experimental effort would be required, such as siloxanes, highly brominated and chlorinated compounds. Two models were suggested as final outputs in this study, one based on good-quality data and the other developed on a larger dataset of consistent Log BMF_L values, which included lower-quality data. The models had similar predictive ability; however, the second model had a larger applicability domain. These QSARs were based on simple MLR equations that could easily be applied for the predictions of dietary BMF_L in fish, and support bioaccumulation assessment procedures at the regulatory level. To ease the application and dissemination of these QSARs, they were included with technical documentation (as QMRF Reports) in the QSAR-ME Profiler software for QSAR predictions available online.

Bisphenol A and its substitutes in the aquatic environment: Occurrence and toxicity assessment

Bisphenol A is classified as a high production volume chemical commonly used in the manufacture of polycarbonate plastics, epoxy resins and thermal paper. The endocrine disrupting properties of this xenobiotic have led to the restriction and prohibition of its use in many consumer products. To date, many chemical compounds with a chemical structure similar to bisphenol A have been used in consumer products as its replacement. The ubiquitous occurrence of bisphenol A and its substitutes in the environment and their endocrine activity as well as adverse effects on aquatic organisms is a global concern, especially because many available literature reports show that many substitutes (e.g. bisphenol AF, bisphenol AP, bisphenol B, bisphenol C, bisphenol F, bisphenol G, bisphenol FL, tetrabromobisphenol A) exert adverse effects on aquatic organisms, similar to, or even stronger than bisphenol A. Therefore, the objective of this paper is to provide a comprehensive overview of the production, sources, occurrence and associated toxicity, as well as the endocrine activity of bisphenol A and its substitutes on aquatic species. The environmental levels and ecotoxicological data presented in this review allowed for a preliminary assessment and prediction of the risk of bisphenol A and its substitutes for aquatic organisms. Furthermore, the data collected in this paper highlight that several compounds applied in bisphenol A-free products are not safe alternatives and regulations regarding their use should be introduced.

Developing an internal threshold of toxicological concern (iTTC)

BACKGROUND

Threshold of Toxicological Concern (TTC) approaches are used for chemical safety assessment and risk-based priority setting for data poor chemicals. TTCs are derived from in vivo No Observed Effect Level (NOEL) datasets involving an external administered dose from a single exposure route, e.g., oral intake rate. Thus, a route-specific TTC can only be compared to a route-specific exposure estimate and such TTCs cannot be used for other exposure scenarios such as aggregate exposures.

OBJECTIVE

Develop and apply a method for deriving internal TTCs (iTTCs) that can be used in chemical assessments for multiple route-specific exposures (e.g., oral, inhalation or dermal) or aggregate exposures.

METHODS

Chemical-specific toxicokinetics (TK) data and models are applied to calculate internal concentrations (whole-body and blood) from the reported administered oral dose NOELs used to derive the Munro TTCs. The new iTTCs are calculated from the 5th percentile of cumulative distributions of internal NOELs and the commonly applied uncertainty factor of 100 to extrapolate animal testing data for applications in human health assessment.

RESULTS

The new iTTCs for whole-body and blood are 0.5 nmol/kg and 0.1 nmol/L, respectively. Because the iTTCs are expressed on a molar basis they are readily converted to chemical mass iTTCs using the molar mass of the chemical of interest. For example, the median molar mass in the dataset is 220 g/mol corresponding to an iTTC of 22 ng/L-blood (22 pg/mL-blood). The iTTCs are considered broadly applicable for many organic chemicals except those that are genotoxic or acetylcholinesterase inhibitors. The new iTTCs can be compared with measured or estimated whole-body or blood exposure concentrations for chemical safety screening and priority-setting.

SIGNIFICANCE

Existing Threshold of Toxicological Concern (TTC) approaches are limited in their applications for route-specific exposure scenarios only and are not suitable for chemical risk and safety assessments under conditions of aggregate exposure. New internal Threshold of Toxicological Concern (iTTC) values are developed to address data gaps in chemical safety estimation for multi-route and aggregate exposures.