Failure characteristics of multiple-component fibrin-based adhesives

Recent Advances in Antimicrobial Peptide Hydrogels

Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.

Technological advances in fibrin for tissue engineering

Fibrin is a promising natural polymer that is widely used for diverse applications, such as hemostatic glue, carrier for drug and cell delivery, and matrix for tissue engineering. Despite the significant advances in the use of fibrin for bioengineering and biomedical applications, some of its characteristics must be improved for suitability for general use. For example, fibrin hydrogels tend to shrink and degrade quickly after polymerization, particularly when they contain embedded cells. In addition, their poor mechanical properties and batch-to-batch variability affect their handling, long-term stability, standardization, and reliability. One of the most widely used approaches to improve their properties has been modification of the structure and composition of fibrin hydrogels. In this review, recent advances in composite fibrin scaffolds, chemically modified fibrin hydrogels, interpenetrated polymer network (IPN) hydrogels composed of fibrin and other synthetic or natural polymers are critically reviewed, focusing on their use for tissue engineering.

Composition, host responses and clinical applications of bioadhesives

Bioadhesives are medical devices used to join or seal tissues that have been injured or incised. They have been classified into tissue adhesives, sealants, and hemostatic agents. Bioadhesives such as FloSeal®, CoSeal®, BioGlue®, Evicel®, Tisseel®, Progel™ PALS, and TissuGlu® have been commercialized and used in clinical setting. They can be formulated with natural or synthetic components or a combination of both including albumin, glutaraldehyde, chitosan, cyanoacrylate, fibrin and thrombin, gelatin, polyethylene glycol (PEG), along with urethanes. Each formulation has intrinsic properties and has been developed and validated for a specific application. This review article briefs the mechanisms by which bioadhesives forms adhesion to tissues and highlights the correlation between bioadhesives composition and their potential host responses. Furthermore, clinical applications of bioadhesives and their application-driven requirements are outlined.

Engineered Hemostatic Biomaterials for Sealing Wounds

Hemostatic biomaterials show great promise in wound control for the treatment of uncontrolled bleeding associated with damaged tissues, traumatic wounds, and surgical incisions. A surge of interest has been directed at boosting hemostatic properties of bioactive materials via mechanisms triggering the coagulation cascade. A wide variety of biocompatible and biodegradable materials has been applied to the design of hemostatic platforms for rapid blood coagulation. Recent trends in the design of hemostatic agents emphasize chemical conjugation of charged moieties to biomacromolecules, physical incorporation of blood-coagulating agents in biomaterials systems, and superabsorbing materials in either dry (foams) or wet (hydrogel) states. In addition, tough bioadhesives are emerging for efficient and physical sealing of incisions. In this Review, we highlight the biomacromolecular design approaches adopted to develop hemostatic bioactive materials. We discuss the mechanistic pathways of hemostasis along with the current standard experimental procedures for characterization of the hemostasis efficacy. Finally, we discuss the potential for clinical translation of hemostatic technologies, future trends, and research opportunities for the development of next-generation surgical materials with hemostatic properties for wound management.

Biodegradable and Biocompatible Adhesives for the Effective Stabilisation, Repair and Regeneration of Bone

Bone defects and complex fractures present significant challenges for orthopaedic surgeons. Current surgical procedures involve the reconstruction and mechanical stabilisation of complex fractures using metal hardware (i.e., wires, plates and screws). However, these procedures often result in poor healing. An injectable, biocompatible, biodegradable bone adhesive that could glue bone fragments back together would present a highly attractive solution. A bone adhesive that meets the many clinical requirements for such an application has yet to be developed. While synthetic and biological polymer-based adhesives (e.g., cyanoacrylates, PMMA, fibrin, etc.) have been used effectively as bone void fillers, these materials lack biomechanical integrity and demonstrate poor injectability, which limits the clinical effectiveness and potential for minimally invasive delivery. This systematic review summarises conventional approaches and recent developments in the area of bone adhesives for orthopaedic applications. The required properties for successful bone repair adhesives, which include suitable injectability, setting characteristics, mechanical properties, biocompatibility and an ability to promote new bone formation, are highlighted. Finally, the potential to achieve repair of challenging bone voids and fractures as well as the potential of new bioinspired adhesives and the future directions relating to their clinical development are discussed.

Bioactive hydrogels based on polysaccharides and peptides for soft tissue wound management

Due to their inherent and tunable biomechanical and biochemical performances, bioactive hydrogels based on polysaccharides and peptides have shown attractive potential for wound management. In this review, the recent progress of bioactive hydrogels prepared by polysaccharides and peptides for soft tissue wound management is overviewed. Meanwhile, we focus on the elaboration of the relationship between chemical structures and inherent bioactive functions of polysaccharides and peptides, as well as the strategies that are taken for achieving multiple wound repairing effects including hemostasis, adhesion, wound contraction and closure, anti-bacteria, anti-oxidation, immunomodulation, molecule delivery, etc. Some innovative and important works are well introduced as well. In the end, current study limitations, clinical unmet needs, and future directions are discussed.

Sutureless Transplantation of Amniotic Membrane Using a Visible Light-Curable Protein Bioadhesive for Ocular Surface Reconstruction

The conjunctiva is a thin mucous membrane of the eye. Pterygium, a commonly appearing disease on the ocular surface, requires surgery to excise the conjunctiva to prevent visual deterioration. Recently, transplantation of the amniotic membrane (AM), which is the innermost membrane of the placenta, has been highlighted as an efficient method to cure conjunctiva defects because of its advantages of no side effects compared to mitomycin C treatment and not leaving additional scars on donor site compared to conjunctival autografting. However, to minimize additional damage to the ocular surface by suturing, AM transplantation (AMT) needs to be simplified by using a less invasive, time-saving method. In this work, a visible light-curable protein bioadhesive (named FixLight) for efficient sutureless AMT is applied. FixLight, which is based on bioengineered mussel adhesive protein (MAP), is easily applied between damaged ocular surfaces and transplanted AM, and rapidly cured by harmless blue light activation. Through in vivo evaluation using a rabbit model, the authors demonstrated that FixLight enabled facile, fast, and strong attachment of AM on sclera and promoted ocular surface reconstruction with good biocompatibility. Thus, FixLight can be successfully used as a promising clinical bioadhesive in opthalmological surgeries that require sutureless and rapid operation.

Antimicrobial laser-activated sealants for combating surgical site infections

Surgical-site infections (SSIs) occur in 2-5% of patients undergoing surgery in the US alone, impacting 300 000-500 000 lives each year, and presenting up to 11 times greater risk of death compared to patients without SSIs. The most common cause of SSI is Staphylococcus aureus, and methicillin-resistant S. aureus (MRSA) is the most common pathogen in community hospitals. Current clinical devices used for approximating incisions and traumatic lacerations include sutures, adhesives, tapes, or staples with or without antimicrobial incorporation. However, current closure technologies may not provide adequate protection against infection, are susceptible to wound dehiscence, and can result in delayed biomechanical recoveries. Laser-activated tissue repair is a sutureless technique in which chromophore-loaded sealants convert laser light energy to heat in order to induce rapid tissue sealing. Here, we describe the generation and evaluation of laser-activated sealant (LASE) biomaterials, in which, indocyanine green (ICG), an FDA-approved dye, was embedded in a silk fibroin matrix and cast into films as wound sealants. Silk-ICG films were subjected to different near-infrared (NIR) laser powers to identify temperatures optimal for laser sealing of soft tissues. A mathematical model was developed in order to determine the photothermal conversion efficiency of LASEs following laser irradiation. NIR laser activation of silk-ICG LASEs increased the recovery of skin biomechanical strength compared to sutured skin in full-thickness incisional wounds in immunocompetent mice, and live animal imaging indicated persistence of silk-ICG LASEs over several days. LASEs loaded with the antibiotic vancomycin demonstrated higher efficacies for combating MRSA infections in a mouse model of surgical site infection compared to antibacterial sutures. Our results demonstrate that LASEs can be loaded with antimicrobial drugs and may serve as new multifunctional biomaterials for rapid tissue sealing, repair and surgical site protection following surgery.

Hyperbranched polymer with dynamic thiol-aldehyde crosslinking and its application as a self-healable bioadhesive

Bioadhesives crosslinked with dynamic bonds exhibit shear-thinning, self-healing, and on-demand detachment properties, but generally show a weak bonding performance due to their poor bulk strength. Obtaining a strong bioadhesive with reversible crosslinking remains a challenge. To address this issue, herein we engineered a dynamic thiol-aldehyde crosslinked solvent-free adhesive based on hyperbranched polymer. The adhesive was obtained by directly mixing a liquid hyperbranched polymer with thiol end groups (HBPTE) and benzaldehyde-terminated polyethylene glycol (PEGCHO) without any additional catalyst or solvent. The solvent-free strategy yielded a dense crosslinking structure with many aldehyde groups, so this HBPTE-PEGCHO adhesive can strongly bond to tissue and various non-biological substrates. In addition, the HBPTE-PEGCHO adhesive has self-healing and thermo-reversible bonding properties due to the dynamic thiol-aldehyde crosslinking matrix. In vivo wound healing experiments show that this HBPTE-PEGCHO adhesive is tissue-benign, suggesting it can be applied in clinical practice. Combining the hyperbranched polymer-based solvent-free strategy and dynamic thiol-aldehyde crosslinking chemistry provides a simple but effective way to engineer a multifunctional bioadhesive with the desired bonding performance.

The adhesion of clots in wounds contributes to hemostasis and can be enhanced by coagulation factor XIII

The adhesion of blood clots to wounds is necessary to seal injured vasculature and achieve hemostasis. However, it has not been specifically tested if adhesive failure of clots is a major contributor to rebleeding and what mechanisms prevent clot delamination. Here, we quantified the contribution of adhesive and cohesive failure to rebleeding in a rat model of femoral artery injury, and identified mechanisms that contribute to the adhesive strength of bulk clots in a lap-shear test in vitro. In the rat bleeding model, the frequency of clot failures correlated positively with blood loss (R = 0.81, p = 0.014) and negatively with survival time (R =  - 0.89, p = 0.0030), with adhesive failures accounting for 51 ± 14% of rebleeds. In vitro, adhesion depended on fibrinogen and coagulation factor XIII (FXIII), and supraphysiological FXIII improved adhesive strength. Furthermore, when exogenous FXIII was topically applied into the wound pocket of rats, eleven adhesive failures occurred between eight rats, compared to seventeen adhesive failures between eight untreated rats, whereas the number of cohesive failures remained the same at sixteen in both groups. In conclusion, rebleeding from both adhesive and cohesive failure of clots decreases survival from hemorrhage in vivo. Both endogenous and exogenous FXIII improves the adhesive strength of clots.

Gelatin Methacryloyl Bioadhesive Improves Survival and Reduces Scar Burden in a Mouse Model of Myocardial Infarction

Background Delivery of hydrogels to the heart is a promising strategy for mitigating the detrimental impact of myocardial infarction (MI). Challenges associated with the in vivo delivery of currently available hydrogels have limited clinical translation of this technology. Gelatin methacryloyl (GelMA) bioadhesive hydrogel could address many of the limitations of available hydrogels. The goal of this proof-of-concept study was to evaluate the cardioprotective potential of GelMA in a mouse model of MI. Methods and Results The physical properties of GelMA bioadhesive hydrogel were optimized in vitro. Impact of GelMA bioadhesive hydrogel on post-MI recovery was then assessed in vivo. In 20 mice, GelMA bioadhesive hydrogel was applied to the epicardial surface of the heart at the time of experimental MI. An additional 20 mice underwent MI but received no GelMA bioadhesive hydrogel. Survival rates were compared for GelMA-treated and untreated mice. Left ventricular function was assessed 3 weeks after experimental MI with transthoracic echocardiography. Left ventricular scar burden was measured with postmortem morphometric analysis. Survival rates at 3 weeks post-MI were 89% for GelMA-treated mice and 50% for untreated mice (P=0.011). Left ventricular contractile function was better in GelMA-treated than untreated mice (fractional shortening 37% versus 26%, P<0.001). Average scar burden in GelMA-treated mice was lower than in untreated mice (6% versus 22%, P=0.017). Conclusions Epicardial GelMA bioadhesive application at the time of experimental MI was performed safely and was associated with significantly improved post-MI survival compared with control animals. In addition, GelMA treatment was associated with significantly better preservation of left ventricular function and reduced scar burden.

Horseradish Peroxidase-Catalyzed Crosslinking of Fibrin Microthread Scaffolds

Horseradish peroxidase (HRP) has been investigated as a catalyst to crosslink tissue-engineered hydrogels because of its mild reaction conditions and ability to modulate the mechanical properties of the matrix. Here, we report the results of the first study investigating the use of HRP to crosslink fibrin scaffolds. We examined the effect of varying HRP and hydrogen peroxide (H2O2) incorporation strategies on the resulting crosslink density and structural properties of fibrin in a microthread scaffold format. Primary (1°) and secondary (2°) scaffold modification techniques were evaluated to crosslink fibrin microthread scaffolds. A primary scaffold modification technique was defined as incorporating crosslinking agents into the microthread precursor solutions during extrusion. A secondary scaffold modification technique was defined as incubating the microthreads in a postprocessing crosslinker bath. Fibrin microthreads were enzymatically crosslinked through primary, secondary, or a combination of both approaches. All fibrin microthread scaffolds crosslinked with HRP and H2O2 via primary and/or secondary methods exhibited an increase in dityrosine crosslink density compared with uncrosslinked control microthreads, demonstrated by scaffold fluorescence. Fourier transform infrared spectroscopy indicated the formation of isodityrosine bonds in 1° HRP crosslinked microthreads. Characterization of tensile mechanical properties revealed that all HRP crosslinked microthreads were significantly stronger than control microthreads. Primary (1°) HRP crosslinked microthreads also demonstrated significantly slower degradation than control microthreads, suggesting that incorporating HRP and H2O2 during extrusion yields scaffolds with increased resistance to proteolytic degradation. Finally, cells seeded on HRP crosslinked microthreads retained a high degree of viability, demonstrating that HRP crosslinking yields biocompatible scaffolds that are suitable for tissue engineering. The goal of this work was to facilitate the logical design of enzymatically crosslinked fibrin microthreads with tunable structural properties, enabling their application for engineered tissue constructs with varied mechanical and structural properties.

Recent Advances in Tissue Adhesives for Clinical Medicine

Tissue adhesives have attracted more attention to the applications of non-invasive wound closure. The purpose of this review article is to summarize the recent progress of developing tissue adhesives, which may inspire researchers to develop more outstanding tissue adhesives. It begins with a brief introduction to the emerging potential use of tissue adhesives in the clinic. Next, several critical mechanisms for adhesion are discussed, including van der Waals forces, capillary forces, hydrogen bonding, static electric forces, and chemical bonds. This article further details the measurement methods of adhesion and highlights the different types of adhesive, including natural or biological, synthetic and semisynthetic, and biomimetic adhesives. Finally, this review article concludes with remarks on the challenges and future directions for design, fabrication, and application of tissue adhesives in the clinic. This review article has promising potential to provide novel creative design principles for the generation of future tissue adhesives.

Entanglement-Driven Adhesion, Self-Healing, and High Stretchability of Double-Network PEG-Based Hydrogels

Hydrogels that are capable of wet adhesion and self-healing can enable major advances in a variety of biomedical applications such as tissue regeneration, wound dressings, wearable/implantable devices, and drug delivery. We hereby developed an innovative but simple strategy to achieve adhesive, self-healing, and highly stretchable double-network hydrogels, which were composed of a primary covalent polyethylene glycol diacrylate (PEGDA) network in combination with a noncovalent network of highly diffusive, giant PEG chains. The adhesion to substrates including tissue matrices was instant and repeatable due to the diffusive PEG chains that can spontaneously penetrate and entangle with the substrate network. Combining the intrinsic biocompatibility of PEG and rational design for tuning the hydrogel network properties, we exemplarily demonstrated that this hydrogel can be used as a three-dimensional matrix for cell culture or as a tissue adhesive for wound healing. The in vivo study showed that the hydrogel is capable of effectively triggering skin wound healing with a significantly lower immune response in comparison to commercial tissue adhesives currently used in clinics. Therefore, our study provides new and critical insights into the design strategy to achieve adhesion and rehealability by taking advantages of the entanglement effect from double-network hydrogels and opens up a new avenue for the application of entanglement-driven hydrogels in regenerative medicine.

Bio-inspired swellable hydrogel-forming double-layered adhesive microneedle protein patch for regenerative internal/external surgical closure

Significant tissue damage, scarring, and an intense inflammatory response remain the greatest concerns for conventional wound closure options, including sutures and staples. In particular, wound closure in internal organs poses major clinical challenges due to air/fluid leakage, local ischemia, and subsequent impairment of healing. Herein, to overcome these limitations, inspired by endoparasites that swell their proboscis to anchor to host's intestines, we developed a hydrogel-forming double-layered adhesive microneedle (MN) patch consisting of a swellable mussel adhesive protein (MAP)-based shell and a non-swellable silk fibroin (SF)-based core. By possessing tissue insertion capability (7-times greater than the force for porcine skin penetration), MAP-derived surface adhesion, and selective swelling-mediated physical entanglement, our hydrogel-forming adhesive MN patch achieved ex vivo superior wound sealing capacity against luminal leaks (139.7 ± 14.1 mmHg), which was comparable to suture (151.0 ± 23.3 mmHg), as well as in vivo excellent performance for wet and/or dynamic external and internal tissues. Collectively, our bioinspired adhesive MN patch can be successfully used in diverse practical applications ranging from vascular and gastrointestinal wound healing to transdermal delivery for pro-regenerative or anti-inflammatory agents to target tissues.

Self-assembled Collagen-Fibrin Hydrogel Reinforces Tissue Engineered Adventitia Vessels Seeded with Human Fibroblasts

Efforts for tissue engineering vascular grafts focuses on the tunica media and intima, although the tunica adventitia serves as the primary structural support for blood vessels. In surgery, during endarterectomies, surgeons can strip the vessel, leaving the adventitia as the main strength layer to close the vessel. Here, we adapted our recently developed technique of forming vascular tissue rings then stacking the rings into a tubular structure, to accommodate human fibroblasts to create adventitia vessels in 8 days. Collagen production and fibril cross-linking was augmented with TGF-β and ascorbic acid, significantly increasing tensile strength to 57.8 ± 3.07 kPa (p = 0.008). Collagen type I gel was added to the base fibrin hydrogel to further increase strength. Groups were: Fibrin only; 0.7 mg/ml COL; 1.7 mg/ml COL; and 2.2 mg/ml COL. The 0.7 mg/ml collagen rings resulted in the highest tensile strength at 77.0 ± 18.1 kPa (p = 0.015). Culture periods of 1–2 weeks resulted in an increase in extracellular matrix deposition and significantly higher failure strength but not ultimate tensile strength. Histological analysis showed the 0.7 mg/ml COL group had significantly more, mature collagen. Thus, a hydrogel of 0.7 mg/ml collagen in fibrin was ideal for creating and strengthening engineered adventitia vessels.

Engineering a highly elastic human protein-based sealant for surgical applications

Surgical sealants have been used for sealing or reconnecting ruptured tissues but often have low adhesion, inappropriate mechanical strength, cytotoxicity concerns, and poor performance in biological environments. To address these challenges, we engineered a biocompatible and highly elastic hydrogel sealant with tunable adhesion properties by photocrosslinking the recombinant human protein tropoelastin. The subcutaneous implantation of the methacryloyl-substituted tropoelastin (MeTro) sealant in rodents demonstrated low toxicity and controlled degradation. All animals survived surgical procedures with adequate blood circulation by using MeTro in an incisional model of artery sealing in rats, and animals showed normal breathing and lung function in a model of surgically induced rat lung leakage. In vivo experiments in a porcine model demonstrated complete sealing of severely leaking lung tissue in the absence of sutures or staples, with no clinical or sonographic signs of pneumothorax during 14 days of follow-up. The engineered MeTro sealant has high potential for clinical applications because of superior adhesion and mechanical properties compared to commercially available sealants, as well as opportunity for further optimization of the degradation rate to fit desired surgical applications on different tissues.

Engineering a sprayable and elastic hydrogel adhesive with antimicrobial properties for wound healing

Hydrogel-based bioadhesives have emerged as alternatives for sutureless wound closure, since they can mimic the composition and physicochemical properties of the extracellular matrix. However, they are often associated with poor mechanical properties, low adhesion to native tissues, and lack of antimicrobial properties. Herein, a new sprayable, elastic, and biocompatible composite hydrogel, with broad-spectrum antimicrobial activity, for the treatment of chronic wounds is reported. The composite hydrogels were engineered using two ECM-derived biopolymers, gelatin methacryloyl (GelMA) and methacryloyl-substituted recombinant human tropoelastin (MeTro). MeTro/GelMA composite hydrogel adhesives were formed via visible light-induced crosslinking. Additionally, the antimicrobial peptide Tet213 was conjugated to the hydrogels, instilling antimicrobial activity against Gram (+) and (-) bacteria. The physical properties (e.g. porosity, degradability, swellability, mechanical, and adhesive properties) of the engineered hydrogel could be fine-tuned by varying the ratio of MeTro/GelMA and the final polymer concentration. The hydrogels supported in vitro mammalian cellular growth in both two-dimensional and three dimensional cultures. The subcutaneous implantation of the hydrogels in rats confirmed their biocompatibility and biodegradation in vivo. The engineered MeTro/GelMA-Tet213 hydrogels can be used for sutureless wound closure strategies to prevent infection and promote healing of chronic wounds.

Structuring of composite hydrogel bioadhesives and its effect on properties and bonding mechanism

Bioadhesives are polymeric hydrogels that can adhere to a tissue after crosslinking and are an essential element in nearly all surgeries worldwide. Several bioadhesives are commercially available. However, none of them are ideal. The main limitation of current tissue adhesives is the tradeoff between biocompatibility and mechanical strength, especially in wet hemorrhagic environments. Our novel bioadhesives are based on the natural polymers gelatin (coldwater fish) and alginate, crosslinked by carbodiimide (EDC). Two types of hemostatic agents with a layered silicate structure, montmorillonite (MMT) and kaolin, were loaded in order to improve the sealing ability in a hemorrhagic environment. The effect of the adhesive's components on its mechanical strength was studied by three different methods - burst strength, lap shear and compression. The viscosity, gelation time and structural features of the adhesive were also studied. A qualitative model that describes the effect of the bioadhesive's parameters on the cohesive and adhesive strength was developed. A formulation based on 400mg/mL gelatin, 10mg/mL alginate and 20mg/mL EDC was found as optimal, enabling a burst strength of 387mmHg. Incorporation of kaolin increased the burst strength by 25% due to microcomposite structuring, whereas MMT increased the burst strength by 50% although loaded in a smaller concentration, due to nano-structuring effects. This research clearly shows that the incorporation of kaolin and MMT in gelatin-alginate surgical sealants is a very promising novel approach for improving the bonding strength and physical properties of surgical sealants for use in hemorrhagic environments.

STATEMENT OF SIGNIFICANCE

The current manuscript focuses on novel bioadhesives, based on natural polymers and loaded with hemostatic agents with a layered silicate structure, in order to improve the sealing ability in hemorrhagic environment. Such composite bioadhesives have not been developed and studied before. The effect of the adhesive's components on its mechanical strength was studied by three different methods, as well as the physical properties and structural features. Thorough understanding of these unique biomaterials resulted in a qualitative model which describes the effect of the bioadhesive's parameters on the cohesive and adhesive strength. Thus, structure-property-function relationships are presented. Structuring of the composite bioadhesives and its effect of the properties and bonding mechanism, are expected to be of high interest to Acta readership.

An in vitro investigation to assess procedure parameters for injecting therapeutic hydrogels into the myocardium

Localized delivery of stem cells is potentially a promising therapeutic strategy for regenerating damaged myocardium. Many studies focus on limiting the biologic component of cell loss, but few address the contribution of mechanical factors. This study investigates optimal parameters for retaining the largest volume of cell loaded hydrogels post intramyocardial injection, without compromising cell viability. In vitro, hydrogel was injected into porcine hearts using various needle designs. Hydrogel retention and distribution pattern was then determined. The two most promising needles were then investigated to understand the effect of needle geometry on stem cell viability. The needle to best impact cell viability was then used to investigate the effect of differing hydrogels on retention and distribution. Three-dimensional experimental modeling revealed needles with smaller diameter's to have greater poloxamer 407 hydrogel retention. No difference in retention existed among various needle designs of similar gauge, despite differences in bolus geometries. When hMSC's, embedded in fibrin hydrogel, were injected through helical and 26G bevel needles no difference in the percent of live cells was seen at 48 h. However, the helical group had almost half the metabolic activity of the 26G bevel group at both time points, and had a significant decline in the percent of live cells from 24 to 48 h. Varying gel type resulted in significantly more alginate being retained in the tissue in comparison to fibrin or poloxamer hydrogels. In conclusion, mechanical properties of injected hydrogels, and the diameter of the needle used, highly influences the volume of hydrogel retained. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2618-2629, 2017.

Customizable engineered blood vessels using 3D printed inserts

Current techniques for tissue engineering blood vessels are not customizable for vascular size variation and vessel wall thickness. These critical parameters vary widely between the different arteries in the human body, and the ability to engineer vessels of varying sizes could increase capabilities for disease modeling and treatment options. We present an innovative method for producing customizable, tissue engineered, self-organizing vascular constructs by replicating a major structural component of blood vessels - the smooth muscle layer, or tunica media. We utilize a unique system combining 3D printed plate inserts to control construct size and shape, and cell sheets supported by a temporary fibrin hydrogel to encourage cellular self-organization into a tubular form resembling a natural artery. To form the vascular construct, 3D printed inserts are adhered to tissue culture plates, fibrin hydrogel is deposited around the inserts, and human aortic smooth muscle cells are then seeded atop the fibrin hydrogel. The gel, aided by the innate contractile properties of the smooth muscle cells, aggregates towards the center post insert, creating a tissue ring of smooth muscle cells. These rings are then stacked into the final tubular construct. Our methodology is robust, easily repeatable and allows for customization of cellular composition, vessel wall thickness, and length of the vessel construct merely by varying the size of the 3D printed inserts. This platform has potential for facilitating more accurate modeling of vascular pathology, serving as a drug discovery tool, or for vessel repair in disease treatment.

Rapidly light-activated surgical protein glue inspired by mussel adhesion and insect structural crosslinking

Currently approved surgical tissue glues do not satisfy the requirements for ideal bioadhesives due to limited adhesion in wet conditions and severe cytotoxicity. Herein, we report a new light-activated, mussel protein-based bioadhesive (LAMBA) inspired by mussel adhesion and insect dityrosine crosslinking chemistry. LAMBA exhibited substantially stronger bulk wet tissue adhesion than commercially available fibrin glue and good biocompatibility in both in vitro and in vivo studies. Besides, the easily tunable, light-activated crosslinking enabled an effective on-demand wound closure and facilitated wound healing. Based on these outstanding properties, LAMBA holds great potential as an ideal surgical tissue glue for diverse medical applications, including sutureless wound closures of skin and internal organs.

Surgical Materials: Current Challenges and Nano-enabled Solutions

Surgical adhesive biomaterials have emerged as substitutes to sutures and staples in many clinical applications. Nano-enabled materials containing nanoparticles or having a distinct nanotopography have been utilized for generation of a new class of surgical materials with enhanced functionality. In this review, the state of the art in the development of conventional surgical adhesive biomaterials is critically reviewed and their shortcomings are outlined. Recent advancements in generation of nano-enabled surgical materials with their potential future applications are discussed. This review will open new avenues for the innovative development of the next generation of tissue adhesives, hemostats, and sealants with enhanced functionality for various surgical applications.

Current state and use of biological adhesives in orthopedic surgery

Bone and tissue adhesives are common and beneficial supplements to standard methods of musculoskeletal tissue suture repair. Knowledge and development of biologically derived or inspired adhesives useful in orthopedic surgery are rapidly advancing. Recent literature demonstrates the increased adjunct or primary use of biological adhesives in the repair of musculoskeletal soft tissues, chondral fractures, and osteochondral fractures. Adhesives offer more benefits and enhancements to tissue healing than current fixation methods afford, including improved biocompatibility, resorbability, and non-immunogenicity. Further investigation is required to determine the extent of the role that these bioadhesives can play in orthopedic surgery. The largest group of biologically derived adhesives and sealants is fibrin sealants, which include first- and second-generation commercially available fibrin sealants, autologous fibrin sealants, and variants. Other groups include gelatin-resorcin aldehydes, protein-aldehyde systems, collagen-based adhesives, polysaccharide- based adhesives, mussel adhesive proteins, and various biologically inspired or biomimetic glues. Potential uses include applications in orthopedic-related blood conservation, arthroplasty, articular cartilage disorders, sports medicine, spine surgery, trauma, and tumors. The development of an adhesive with universal application is likely unfeasible, given the unique characteristics of various musculoskeletal tissues. However, the literature demonstrates the overall underuse of adhesives and indicates the rising probability of the development of a successful variety of bioadhesives for use in orthopedic surgery. As a result of reading this article, physicians should be able to: 1. Describe the difference between adhesives and sealants. 2. Recognize fibrin adhesives commonly used in practice today and identify other biological adhesives with rising potential. 3. Analyze how fibrin sealants work relative to fibrin and fibrinogen. 4. Identify anatomical areas and techniques in which fibrin sealants are used.

Development of poly(trimethylene carbonate) network implants for annulus fibrosus tissue engineering

PURPOSE

Intervertebral disk degeneration is the main cause of chronic back pain. Disk degeneration often leads to tearing of the annulus fibrosus (AF) and extrusion of the nucleus pulposus (NP), which compresses the nerves. Current treatment involves removing the herniated NP and suturing the damaged AF tissue. This surgical approach has several drawbacks. In this study, we designed a biodegradable AF closure system comprising a tissue engineering scaffold, a supporting membrane and an adhesive material, to not only restore the function of the herniated disc but also to promote tissue regeneration.

MATERIALS AND METHODS

Porous scaffolds with precisely defined architectures were built by stereolithography using resins based on poly(trimethylene carbonate) (PTMC) macromers functionalized with methacrylate endgroups. In addition, a porous photo-cross-linked PTMC membrane was developed that can be used to keep the scaffold in place in the AF tissue.

RESULTS

After synthesis and characterization, the components of the implant are glued together and to the AF tissue using a diisocyanate glue based on polyethylene glycol-PTMC triblock copolymers. The adhesion strengths of the materials to each other and to AF tissue were determined in lap-shear tests.

CONCLUSIONS

This study showed that a device for AF tissue engineering can be prepared from PTMC-based scaffolds, membranes and glues.

Induced collagen cross-links enhance cartilage integration

Articular cartilage does not integrate due primarily to a scarcity of cross-links and viable cells at the interface. The objective of this study was to test the hypothesis that lysyl-oxidase, a metalloenzyme that forms collagen cross-links, would be effective in improving integration between native-to-native, as well as tissue engineered-to-native cartilage surfaces. To examine these hypotheses, engineered cartilage constructs, synthesized via the self-assembling process, as well as native cartilage, were implanted into native cartilage rings and treated with lysyl-oxidase for varying amounts of time. For both groups, lysyl-oxidase application resulted in greater apparent stiffness across the cartilage interface 2–2.2 times greater than control. The construct-to-native lysyl-oxidase group also exhibited a statistically significant increase in the apparent strength, here defined as the highest observed peak stress during tensile testing. Histology indicated a narrowing gap at the cartilage interface in lysyl-oxidase treated groups, though this alone is not sufficient to indicate annealing. However, when the morphological and mechanical data are taken together, the longer the duration of lysyl-oxidase treatment, the more integrated the interface appeared. Though further data are needed to confirm the mechanism of action, the enhancement of integration may be due to lysyl-oxidase-induced pyridinoline cross-links. This study demonstrates that lysyl-oxidase is a potent agent for enhancing integration between both native-to-native and native-to-engineered cartilages. The fact that interfacial strength increased manifold suggests that cross-linking agents should play a significant role in solving the difficult problem of cartilage integration. Future studies must examine dose, dosing regimen, and cellular responses to lysyl-oxidase to optimize its application.

Computational Investigation of Fibrin Mechanical and Damage Properties at the Interface Between Native Cartilage and Implant

Scaffold-based tissue-engineered constructs as well as cell-free implants offer promising solutions to focal cartilage lesions. However, adequate mechanical stability of these implants in the lesion is required for successful repair. Fibrin is the most common clinically available adhesive for cartilage implant fixation, but fixation quality using fibrin is not well understood. The objectives of this study were to investigate the conditions leading to damage in the fibrin adhesive and to determine which adhesive properties are important in preventing delamination at the interface. An idealized finite element model of the medial compartment of the knee was created, including a circular defect and an osteochondral implant. Damage and failure of fibrin at the interface was represented by a cohesive zone model with coefficients determined from an inverse finite element method and previously published experimental data. Our results demonstrated that fibrin glue alone may not be strong enough to withstand physiologic loads in vivo while fibrin glue combined with chondrocytes more effectively prevents damage at the interface. The results of this study suggest that fibrin fails mainly in shear during off-axis loading and that adhesive materials that are stronger or more compliant than fibrin may be good alternatives due to decreased failure at the interface. The present model may be used to improve design and testing protocols of bioadhesives and give insight into the failure mechanisms of cartilage implant fixation in the knee joint.

A method to screen and evaluate tissue adhesives for joint repair applications

BACKGROUND

Tissue adhesives are useful means for various medical procedures. Since varying requirements cause that a single adhesive cannot meet all needs, bond strength testing remains one of the key applications used to screen for new products and study the influence of experimental variables. This study was conducted to develop an easy to use method to screen and evaluate tissue adhesives for tissue engineering applications.

METHOD

Tissue grips were designed to facilitate the reproducible production of substrate tissue and adhesive strength measurements in universal testing machines. Porcine femoral condyles were used to generate osteochondral test tissue cylinders (substrates) of different shapes. Viability of substrates was tested using PI/FDA staining. Self-bonding properties were determined to examine reusability of substrates (n = 3). Serial measurements (n = 5) in different operation modes (OM) were performed to analyze the bonding strength of tissue adhesives in bone (OM-1) and cartilage tissue either in isolation (OM-2) or under specific requirements in joint repair such as filling cartilage defects with clinical applied fibrin/PLGA-cell-transplants (OM-3) or tissues (OM-4). The efficiency of the method was determined on the basis of adhesive properties of fibrin glue for different assembly times (30 s, 60 s). Seven randomly generated collagen formulations were analyzed to examine the potential of method to identify new tissue adhesives.

RESULTS

Viability analysis of test tissue cylinders revealed vital cells (>80%) in cartilage components even 48 h post preparation. Reuse (n = 10) of test substrate did not significantly change adhesive characteristics. Adhesive strength of fibrin varied in different test settings (OM-1: 7.1 kPa, OM-2: 2.6 kPa, OM-3: 32.7 kPa, OM-4: 30.1 kPa) and was increasing with assembly time on average (2.4-fold). The screening of the different collagen formulations revealed a substance with significant higher adhesive strength on cartilage (14.8 kPa) and bone tissue (11.8 kPa) compared to fibrin and also considerable adhesive properties when filling defects with cartilage tissue (23.2 kPa).

CONCLUSION

The method confirmed adhesive properties of fibrin and demonstrated the dependence of adhesive properties and applied settings. Furthermore the method was suitable to screen for potential adhesives and to identify a promising candidate for cartilage and bone applications. The method can offer simple, replicable and efficient evaluation of adhesive properties in ex vivo specimens and may be a useful supplement to existing methods in clinical relevant settings.

Cohesive behavior of soft biological adhesives: experiments and modeling

Extracellular proteins play a key role in generating and maintaining cohesion and adhesion in biological tissues. These "natural glues" are involved in vital biological processes such as blood clotting, wound healing and maintaining the structural integrity of tissues. Macromolecular assemblies of proteins can be functionally stabilized in a variety of ways in situ that include ionic interactions as well as covalent crosslinking to form protein networks that can extend both within and between tissues. Within tissues, myriad cohesive forces are required to preserve tissue integrity and function, as are additional appropriate adhesive forces at interfaces both within and between tissues of differing composition. While the mechanics of some key structural adhesive proteins have been characterized in tensile experiments at both the macroscopic and single protein levels, the fracture toughness of thin proteinaceous interfaces has never been directly measured. Here, we describe a novel and simple approach to measure the cohesive behavior and toughness of thin layers of proteinaceous adhesives. The test is based on the standard double-cantilever beam test used for engineering adhesives, which was adapted to take into account the high compliance of the interface compared with the beams. This new "rigid double-cantilever beam" method enables stable crack propagation through an interfacial protein layer, and provides a direct way to measure its full traction-separation curve. The method does not require any assumption of the shape of the cohesive law, and the results provide abundant information contributing to understanding the structural, chemical and molecular mechanisms acting in biological adhesion. As an example, results are presented using this method for thin films of fibrin-a protein involved in blood clotting and used clinically as a tissue bio-adhesive after surgery-with the effects of calcium and crosslinking by Factor XIII being examined. Finally, a simple model is proposed, demonstrating how a bell-shaped cohesive law forms during the failure of the fibrin interface based on an eight-chain model whose structure degrades and changes configuration with stress.

Injectable acellular hydrogels for cardiac repair

Injectable hydrogels are being developed as potential translatable materials to influence the cascade of events that occur after myocardial infarction. These hydrogels, consisting of both synthetic and natural materials, form through numerous chemical crosslinking and assembly mechanisms and can be used as bulking agents or for the delivery of biological molecules. Specifically, a range of materials are being applied that alter the resulting mechanical and biological signals after infarction and have shown success in reducing stresses in the myocardium and limiting the resulting adverse left ventricular (LV) remodeling. Additionally, the delivery of molecules from injectable hydrogels can influence cellular processes such as apoptosis and angiogenesis in cardiac tissue or can be used to recruit stem cells for repair. There is still considerable work to be performed to elucidate the mechanisms of these injectable hydrogels and to optimize their various properties (e.g., mechanics and degradation profiles). Furthermore, although the experimental findings completed to date in small animals are promising, future work needs to focus on the use of large animal models in clinically relevant scenarios. Interest in this therapeutic approach is high due to the potential for developing percutaneous therapies to limit LV remodeling and to prevent the onset of congestive heart failure that occurs with loss of global LV function. This review focuses on recent efforts to develop these injectable and acellular hydrogels to aid in cardiac repair.

Intra-myocardial biomaterial injection therapy in the treatment of heart failure: Materials, outcomes and challenges

Heart failure initiated by coronary artery disease and myocardial infarction (MI) is a widespread, debilitating condition for which there are a limited number of options to prevent disease progression. Intra-myocardial biomaterial injection following MI theoretically provides a means to reduce the stresses experienced by the infarcted ventricular wall, which may alter the pathological remodeling process in a positive manner. Furthermore, biomaterial injection provides an opportunity to concurrently introduce cellular components and depots of bioactive agents. Biologically derived, synthetic and hybrid materials have been applied, as well as materials designed expressly for this purpose, although optimal design parameters, including degradation rate and profile, injectability, elastic modulus and various possible bioactivities, largely remain to be elucidated. This review seeks to summarize the current body of growing literature where biomaterial injection, with and without concurrent pharmaceutical or cellular delivery, has been pursued to improve functional outcomes following MI. The literature to date generally demonstrates acute functional benefits associated with biomaterial injection therapy across a broad variety of animal models and material compositions. Further functional improvements have been reported when cellular or pharmaceutical agents have been incorporated into the delivery system. Despite these encouraging early results, the specific mechanisms behind the observed functional improvements remain to be fully explored and future studies employing hypothesis-driven material design and selection may increase the potential of this approach to alleviate the morbidity and mortality of heart failure.

Fibrin as a delivery system for therapeutic drugs and biomolecules

Fibrin is a natural biopolymer involved in the coagulation cascade. It acts as a reservoir for growth factors, cells, and enzymes during wound healing and provides a scaffold for the synthesis of extracellular matrix. Thus, the use of fibrin has expanded in recent years from traditional use as a sealant for surgical applications, to a tissue engineering scaffold capable of providing nature's cues for tissue regeneration. This paper reviews the advantageous biological aspects of fibrin, the history of the scaffold material, and its present role in the delivery of drugs, growth factors, cells, and gene vectors. Examples are given of studies where the structure and form of the scaffold have been manipulated for optimal release of the therapeutic agent, optimal cellular activity, and investigation into stem cell differentiation. It is evident from the body of literature presented that the benefits of fibrin are being exploited for a vast range of tissue engineering applications and that fibrin remains a key scaffold material for the delivery of drugs and biomolecules.

Evaluation of photo-crosslinked fibrinogen as a rapid and strong tissue adhesive

Tissue adhesives and sealants are commonly used in surgery either as an adjunct to, or replacement for, sutures. Previously, we have shown that fibrinogen can be crosslinked rapidly to give a high-strength bond in the presence of a ruthenium(II) complex, a persulfate and irradiation with visible light, and that the crosslinked fibrinogen is nontoxic to cells in vitro. This approach addresses limitations to current fibrin sealants that typically have relatively slow curing times and low bond strengths. In the present study, we have evaluated the efficacy and safety of this new biological scaffold sealant in various animal models. When placed as solid implants into rats, the crosslinked fibrinogen persisted for at least 8 weeks but was fully resorbed by 18 weeks with minimal inflammatory responses. When used as a tissue adhesive for repair of skin incisions in rats or as an arterial haemostat in pig, the photo-crosslinked fibrinogen sealed tissue or arrested bleeding within 20 s of application. For the skin incisions, the fibrinogen sealant promoted rapid tissue vascularization and cellular infiltration with no adverse foreign body cell generation. New collagen deposition occurred and with time the matrix had remodelled to acquire large mature collagen fiber bundles which were accompanied by maximum regenerated tensile strength. This biomaterial system may find useful applications in surgical procedures where rapid curing and/or high strength tissue sealing is required.

Glubran2 surgical glue: in vitro evaluation of adhesive and mechanical properties

BACKGROUND

In surgical and endoscopic procedures, tissue adhesives are commonly used as reinforcement of sutures or as bonding and hemostatic agents. Fibrin glues do not guarantee adequate properties for many clinical applications; on the contrary, cyanoacrylate glues guarantee high bonding strength between biologic tissues. The aim of this study was to provide evidence regarding adhesive and strength properties of a widely used cyanoacrylate glue, Glubran2, GEM s.r.l., Viareggio, Italy. Comparative tests were also carried out on a commercial fibrin glue.

MATERIAL AND METHODS

Glubran2 is a modified n-butyl-2-cyanoacrylate glue approved for internal and external use, in Europe. The glue, on contact with living tissues polymerizes rapidly, generating a film that guarantees firm adherence of tissues. In this study, adhesive properties on biologic substrates, both of Glubran2 and of fibrin glue, were investigated according to American Society for Testing and Materials (ASTM) standards, while their strength, after polymerization on an inert substrate, was investigated according to Deutsches Institut Für Normung (DIN) standards.

RESULTS

All tests evidenced a strong bonding capability of Glubran2 on biologic tissues and high tensile strength of polymerized film; high breaking strength of polymerized glue was highlighted by tensile tests.

CONCLUSION

The present study fills the gap concerning Glubran2 adhesive and tensile properties. All tests showed the intrinsic tensile strength of polymerized Glubran2 and its capability to realize a higher-resistance bonding among biologic tissues, in comparison with fibrin glue, giving strong indication of its usefulness in surgical and endoscopic practice, especially in a wet environment.

The development of photochemically crosslinked native fibrinogen as a rapidly formed and mechanically strong surgical tissue sealant

We recently reported the generation of a highly elastic, crosslinked protein biomaterial via a rapid photochemical process using visible light illumination. In light of these findings, we predicted that other unmodified, tyrosine-rich, self-associating proteins might also be susceptible to this covalent crosslinking method. Here we show that unmodified native fibrinogen can also be photochemically crosslinked into an elastic hydrogel biomaterial through the rapid formation of intermolecular dityrosine. Photochemically crosslinked fibrinogen forms tissue sealant bonds at least 5-fold stronger than commercial fibrin glue and is capable of producing maximum bond strength within 20s. In vitro studies showed that components of the photochemical crosslinking reaction are non-toxic to cells. This material will find useful application in various surgical procedures where rapid curing for high strength tissue sealing is required.

Blockade of thrombospondin-1-CD47 interactions prevents necrosis of full thickness skin grafts

BACKGROUND

Skin graft survival and healing requires rapid restoration of blood flow to the avascular graft. Failure or delay in the process of graft vascularization is a significant source of morbidity and mortality. One of the primary regulators of blood flow and vessel growth is nitric oxide (NO). The secreted protein thrombospondin-1 (TSP1) limits NO-stimulated blood flow and growth and composite tissue survival to ischemia. We herein demonstrate a role for TSP1 in regulating full thickness skin graft (FTSG) survival.

METHODS AND RESULTS

FTSG consistently fail in wild type C57BL/6 mice but survive in mice lacking TSP1 or its receptor CD47. Ablation of the TSP1 receptor CD36, however, did not improve FTSG survival. Remarkably, wild type FTSG survived on TSP1 null or CD47 null mice, indicating that TSP1 expression in the wound bed is the primary determinant of graft survival. FTSG survival in wild type mice could be moderately improved by increasing NO flux, but graft survival was increased significantly through antibody blocking of TSP1 binding to CD47 or antisense morpholino oligonucleotide suppression of CD47.

CONCLUSIONS

TSP1 through CD47 limits skin graft survival. Blocking TSP1 binding or suppressing CD47 expression drastically increases graft survival. The therapeutic applications of this approach could include burn patients and the broader group of people requiring grafts or tissue flaps for closure and reconstruction of complex wounds of diverse etiologies.

Development of a reinforced porcine elastin composite vascular scaffold

Elastin, a principal structural component of native arteries, has distinct biological and mechanical advantages when used as a biomaterial; however, its low ultimate tensile strength has limited its use as an arterial conduit. We have developed a scaffold, consisting of a purified elastin tubular conduit strengthened with fibrin bonded layers of acellular small intestinal submucosa (aSIS) for potential use as a small diameter vascular graft. The addition of aSIS increased the ultimate tensile strength of the elastin conduits nine-fold. Burst pressures for the elastin composite vascular scaffold (1,396 +/- 309 mmHg) were significantly higher than pure elastin conduits (162 +/- 36 mmHg) and comparable to native saphenous veins. The average suture pullout strength of the elastin composite vascular scaffolds was 14.612 +/- 3.677 N, significantly higher than the pure elastin conduit (0.402 +/- 0.098 N), but comparable to native porcine carotid arteries (13.994 +/- 4.344 N). Cyclic circumferential strain testing indicated that the composite scaffolds were capable of withstanding physiological loading conditions for at least 83 h. Implantation of the elastin composites as carotid interposition grafts in swine demonstrated its superiority to clinically acceptable ePTFE with significantly longer average patency times of 5.23 h compared to 4.15 h. We have developed a biologically based elastin scaffold with suitable mechanical properties and low thrombogenicity for in vivo implantation, and with the potential for cellular repopulation and host integration reestablishing an appropriate elastic artery.

A fibrinogen-based precision microporous scaffold for tissue engineering

Fibrin has been long used as an effective scaffolding material to grow a variety of cells and tissue constructs. It has been utilized mainly as a hydrogel in varying concentrations to provide an environment in which suspended cells work to rearrange the fibers and lay down their own extracellular matrix. For these fibrin hydrogels to be useful in many tissue-engineering applications, the gels must be cultured for long periods of time in order to increase their mechanical strength to the levels of native tissues. High concentrations of fibrinogen increase the mechanical strength of fibrin hydrogels, but at the same time reduce the ability of cells within the scaffold to spread and survive. We present a method to create a microporous, nanofibriliar fibrin scaffold that has controllable pore size, porosity, and microstructure for applications in tissue engineering. Fibrin has numerous advantages as a scaffolding material as it is normally used by the body as temporary scaffolding for tissue regeneration and healing, and can be autologously sourced. We present here a scaffolding process which enhances the mechanical properties of the fibrin hydrogel by forming it surrounding poly(methyl-methacrylate) beads, then removing the beads with acetone to form an interconnected microporous network. The acetone serves the dual purpose of precipitating and fixing the fibrinogen-based scaffolds as well as adding strength to the network during polymer bead removal. Effects of fibrinogen concentration and time in acetone were examined as well as polymerization with thrombin. A natural crosslinker, genipin, was also used to add strength to the scaffolds, producing a Young's modulus of up to 184+/-5 kPa after 36 h of reaction. Using these methods we were able to produce microporous fibrin scaffolds that support cell growth and have mechanical properties similar to many native tissues.