1
|
Accolla RP, Deller M, Lansberry TR, Simmons A, Liang JP, Patel SN, Jiang K, Stabler CL. 3D printed elastomeric biomaterial mitigates compaction during in vitro vasculogenesis. Acta Biomater 2023; 171:363-377. [PMID: 37739251 PMCID: PMC11146342 DOI: 10.1016/j.actbio.2023.09.026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2023] [Revised: 09/11/2023] [Accepted: 09/15/2023] [Indexed: 09/24/2023]
Abstract
A key parameter for the success of most cellular implants is the formation of a complete and comprehensive intra-implant vessel network. Pre-vascularization, the generation of vessel structures in vitro prior to transplantation, provides accelerated implant perfusion via anastomosis, but scalability and ease of integration hinder clinical translation. For fibrin-based vasculogenesis approaches, the remodeling and degradation of the fragile, hydrogel matrix during the formation of vessel-like structures results in rapid, cell-mediated construct compaction leading to dense, capillary-like structures with ineffective network coverage. To resolve these challenges, vasculogenic hydrogels were embedded within a highly porous, biostable three-dimensional (3D) polydimethylsiloxane (PDMS) scaffold. Using reverse-casting of 3D-printed molds, scaffolds exhibited highly interconnected and reproducible pore structures. Pore size was optimized via in vivo screening of intra-device angiogenesis. The inclusion of the PDMS frame with vasculogenic hydrogels significantly reduced fibrin compaction in vitro, resulting in easily manipulated constructs with predictable dimensionality and increased surface area compared to fibrin hydrogel alone. Globally, vascular morphogenesis was altered by the PDMS frame, with significantly larger and less dense network structures. Vasculogenic proteomic evaluation showed a temporal impact of the addition of the PDMS frame, indicating altered cellular proliferation and migration signaling. This work establishes a platform for improving the generation of translational pre-vascularized networks for greater flexibility to meet the needs of clinically scaled, engineered tissues. STATEMENT OF SIGNIFICANCE: Competent intra-implant vascularization is a significant issue hindering the success of engineered tissues. Pre-vascularization approaches, whereby a vascular network is formed in vitro and subsequently implanted into the host to anastomose, is a promising approach but it is limited by the compacted, dense, and poorly functional microcapillary structures typically formed using soft hydrogels. Herein, we have uniquely addressed this challenge by adding a 3D printed PDMS-based open framework structure that serves to prevent hydrogel compaction. Globally, we observed distinct differences in overall construct geometry, vascular network density, compaction, and morphogenesis, indicating that this PDMS framework lead to elevated maturity of this in vitro network while retaining its global dimensions. Overall, this novel approach elevates the translational potential of pre-vascularized constructs.
Collapse
Affiliation(s)
- Robert P Accolla
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Madison Deller
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Taylor R Lansberry
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Amberlyn Simmons
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Jia-Pu Liang
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Smit N Patel
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Kaiyuan Jiang
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA
| | - Cherie L Stabler
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, FL, USA; Department of Immunology and Pathology, College of Medicine, University of Florida, Gainesville, FL, USA; University of Florida Diabetes Institute, Gainesville, FL, USA.
| |
Collapse
|
2
|
Paddillaya N, Ingale K, Gaikwad C, Saini DK, Pullarkat P, Kondaiah P, Menon GI, Gundiah N. Cell adhesion strength and tractions are mechano-diagnostic features of cellular invasiveness. SOFT MATTER 2022; 18:4378-4388. [PMID: 35611829 DOI: 10.1039/d2sm00015f] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The adhesion of cells to substrates occurs via integrin clustering and binding to the actin cytoskeleton. Oncogenes modify anchorage-dependent mechanisms in cells during cancer progression. Fluid shear devices provide a label-free way to characterize cell-substrate interactions and heterogeneities in cell populations. We quantified the critical adhesion strengths of MCF-7, MDAMB-231, A549, HPL1D, HeLa, and NIH3T3 cells using a custom fluid shear device. The detachment response was sigmoidal for each cell type. A549 and MDAMB-231 cells had significantly lower critical adhesion strengths (τ50) than their non-invasive counterparts, HPL1D and MCF-7. Detachment dynamics inversely correlated with cell invasion potentials. A theoretical model, based on τ50 values and the distribution of cell areas on substrates, provided good fits to results from de-adhesion experiments. Quantification of cell tractions, using the Reg-FTTC method on 10 kPa polyacrylamide gels, showed highest values for invasive, MDAMB-231 and A549, cells compared to non-invasive cells. Immunofluorescence studies show differences in vinculin distributions; non-invasive cells have distinct vinculin puncta, whereas invasive cells have more dispersed distributions. The cytoskeleton in non-invasive cells was devoid of well-developed stress fibers, and had thicker cortical actin bundles in the boundary. Fluorescence intensity of actin was significantly lower in invasive cells as compared to non invasive cells. These correlations in adhesion strengths and traction stresses with cell invasiveness may be useful in cancer diagnostics and other pathologies featuring mis-regulation in adhesion.
Collapse
Affiliation(s)
- Neha Paddillaya
- Centre for Biosystems Science and Engineering, Indian Institute of Science, Bangalore, India
| | - Kalyani Ingale
- Biological Sciences, Indian Institute of Science, Bangalore, India.
| | - Chaitanya Gaikwad
- Department of Mechanical Engineering, Indian Institute of Science, Bangalore, India
| | - Deepak Kumar Saini
- Centre for Biosystems Science and Engineering, Indian Institute of Science, Bangalore, India
- Department of Molecular Reproduction, Development and Genetics, Indian Institute of Science, Bangalore, India
| | - Pramod Pullarkat
- Soft Condensed Matter Group, Raman Research Institute, Bangalore, India
| | - Paturu Kondaiah
- Department of Molecular Reproduction, Development and Genetics, Indian Institute of Science, Bangalore, India
| | - Gautam I Menon
- The Institute of Mathematical Sciences, Chennai, India
- Departments of Physics and Biology, Ashoka University, Sonepat, India
| | - Namrata Gundiah
- Centre for Biosystems Science and Engineering, Indian Institute of Science, Bangalore, India
- Department of Mechanical Engineering, Indian Institute of Science, Bangalore, India
| |
Collapse
|
3
|
Ungai-Salánki R, Peter B, Gerecsei T, Orgovan N, Horvath R, Szabó B. A practical review on the measurement tools for cellular adhesion force. Adv Colloid Interface Sci 2019; 269:309-333. [PMID: 31128462 DOI: 10.1016/j.cis.2019.05.005] [Citation(s) in RCA: 49] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2019] [Revised: 05/05/2019] [Accepted: 05/06/2019] [Indexed: 01/03/2023]
Abstract
Cell-cell and cell-matrix adhesions are fundamental in all multicellular organisms. They play a key role in cellular growth, differentiation, pattern formation and migration. Cell-cell adhesion is substantial in the immune response, pathogen-host interactions, and tumor development. The success of tissue engineering and stem cell implantations strongly depends on the fine control of live cell adhesion on the surface of natural or biomimetic scaffolds. Therefore, the quantitative and precise measurement of the adhesion strength of living cells is critical, not only in basic research but in modern technologies, too. Several techniques have been developed or are under development to quantify cell adhesion. All of them have their pros and cons, which has to be carefully considered before the experiments and interpretation of the recorded data. Current review provides a guide to choose the appropriate technique to answer a specific biological question or to complete a biomedical test by measuring cell adhesion.
Collapse
|
4
|
Kim HW, Han S, Kim W, Lim J, Kim DS. Modulating wall shear stress gradient via equilateral triangular channel for in situ cellular adhesion assay. BIOMICROFLUIDICS 2016; 10:054119. [PMID: 27822327 PMCID: PMC5074993 DOI: 10.1063/1.4965822] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2016] [Accepted: 10/08/2016] [Indexed: 06/06/2023]
Abstract
This study introduces an equilateral triangular channel (ETRIC), a novel microfluidic channel with an equilateral triangular cross-section, for cell adhesion assay by modulating the wall shear stress (WSS) gradient. The channel can generate a parabolic WSS gradient perpendicular to the flow direction at a single flow rate, and cell detachment can be in situ screened in response to spatially different levels of WSS. The existence of a simple form of exact solution for the velocity field inside the entire ETRIC region enables the easy design and modulation of the WSS levels at the bottom surface; therefore, the detachment of the cells can be investigated at the pre-defined observation window in real time. The exact solution for the velocity field was validated by comparing the analytical velocity profile with those obtained from both numerical simulation and experimental particle image velocimetry. The parabolic WSS gradient can be generated stably and consistently over time at a steady-state condition and easily modulated by changing the flow rate for the given ETRIC geometry. The WSS gradient in the ETRIC is in a symmetric parabolic form, and this symmetry feature doubles the experimental data, thereby efficiently minimizing the number of experiments. Finally, a WSS gradient ranging from 0 to 160 dyn/cm2 was generated through the present ETRIC, which enables not only to measure the adhesion strength but also to investigate the time-dependent detachment of NIH-3T3 cells attached on the glass.
Collapse
Affiliation(s)
- Hyung Woo Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) , 77 Cheongam-ro, Nam-gu, Pohang 37673, South Korea
| | - Seonjin Han
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) , 77 Cheongam-ro, Nam-gu, Pohang 37673, South Korea
| | - Wonkyoung Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) , 77 Cheongam-ro, Nam-gu, Pohang 37673, South Korea
| | - Jiwon Lim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) , 77 Cheongam-ro, Nam-gu, Pohang 37673, South Korea
| | - Dong Sung Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) , 77 Cheongam-ro, Nam-gu, Pohang 37673, South Korea
| |
Collapse
|
5
|
Kushiro K, Lee CH, Takai M. Simultaneous characterization of protein–material and cell–protein interactions using dynamic QCM-D analysis on SAM surfaces. Biomater Sci 2016; 4:989-97. [DOI: 10.1039/c5bm00613a] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
QCM-D signal patterns can serve as rules of thumb for biomaterial development by simultaneously characterizing different protein–material and cell–protein interactions.
Collapse
Affiliation(s)
- Keiichiro Kushiro
- Department of Bioengineering
- School of Engineering
- The University of Tokyo
- Tokyo 113-8656
- Japan
| | - Chih-Hao Lee
- Department of Bioengineering
- School of Engineering
- The University of Tokyo
- Tokyo 113-8656
- Japan
| | - Madoka Takai
- Department of Bioengineering
- School of Engineering
- The University of Tokyo
- Tokyo 113-8656
- Japan
| |
Collapse
|
6
|
A Review of Cell Adhesion Studies for Biomedical and Biological Applications. Int J Mol Sci 2015; 16:18149-84. [PMID: 26251901 PMCID: PMC4581240 DOI: 10.3390/ijms160818149] [Citation(s) in RCA: 523] [Impact Index Per Article: 58.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2015] [Revised: 06/21/2015] [Accepted: 06/24/2015] [Indexed: 01/13/2023] Open
Abstract
Cell adhesion is essential in cell communication and regulation, and is of fundamental importance in the development and maintenance of tissues. The mechanical interactions between a cell and its extracellular matrix (ECM) can influence and control cell behavior and function. The essential function of cell adhesion has created tremendous interests in developing methods for measuring and studying cell adhesion properties. The study of cell adhesion could be categorized into cell adhesion attachment and detachment events. The study of cell adhesion has been widely explored via both events for many important purposes in cellular biology, biomedical, and engineering fields. Cell adhesion attachment and detachment events could be further grouped into the cell population and single cell approach. Various techniques to measure cell adhesion have been applied to many fields of study in order to gain understanding of cell signaling pathways, biomaterial studies for implantable sensors, artificial bone and tooth replacement, the development of tissue-on-a-chip and organ-on-a-chip in tissue engineering, the effects of biochemical treatments and environmental stimuli to the cell adhesion, the potential of drug treatments, cancer metastasis study, and the determination of the adhesion properties of normal and cancerous cells. This review discussed the overview of the available methods to study cell adhesion through attachment and detachment events.
Collapse
|
7
|
Cell detachment: Post-isolation challenges. Biotechnol Adv 2013; 31:1664-75. [DOI: 10.1016/j.biotechadv.2013.08.013] [Citation(s) in RCA: 39] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2013] [Revised: 08/17/2013] [Accepted: 08/17/2013] [Indexed: 12/16/2022]
|
8
|
Warrick JW, Young EWK, Schmuck EG, Saupe KW, Beebe DJ. High-content adhesion assay to address limited cell samples. Integr Biol (Camb) 2013; 5:720-7. [PMID: 23426645 PMCID: PMC3832292 DOI: 10.1039/c3ib20224k] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Cell adhesion is a broad topic in cell biology that involves physical interactions between cells and other cells or the surrounding extracellular matrix, and is implicated in major research areas including cancer, development, tissue engineering, and regenerative medicine. While current methods have contributed significantly to our understanding of cell adhesion, these methods are unsuitable for tackling many biological questions requiring intermediate numbers of cells (10(2)-10(5)), including small animal biopsies, clinical samples, and rare cell isolates. To overcome this fundamental limitation, we developed a new assay to quantify the adhesion of ~10(2)-10(3) cells at a time on engineered substrates, and examined the adhesion strength and population heterogeneity via distribution-based modeling. We validated the platform by testing adhesion strength of cancer cells from three different cancer types (breast, prostate, and multiple myeloma) on both IL-1β activated and non-activated endothelial monolayers, and observed significantly increased adhesion for each cancer cell type upon endothelial activation, while identifying and quantifying distinct subpopulations of cell-substrate interactions. We then applied the assay to characterize adhesion of primary bone marrow stromal cells to different cardiac fibroblast-derived matrix substrates to demonstrate the ability to study limited cell populations in the context of cardiac cell-based therapies. Overall, these results demonstrate the sensitivity and robustness of the assay as well as its ability to enable extraction of high content, functional data from limited and potentially rare primary samples. We anticipate this method will enable a new class of biological studies with potential impact in basic and translational research.
Collapse
Affiliation(s)
- Jay W. Warrick
- University of Wisconsin, Biomedical Engineering, Madison, WI. Fax: XX XXXX XXXX; Tel: XX XXXX XXXX
| | - Edmond W. K. Young
- University of Wisconsin, Biomedical Engineering, Madison, WI. Fax: XX XXXX XXXX; Tel: XX XXXX XXXX
| | - Eric G. Schmuck
- University of Wisconsin, School of Medicine and Public Health, Madison, WI
| | - Kurt W. Saupe
- University of Wisconsin, School of Medicine and Public Health, Madison, WI
| | - David J. Beebe
- University of Wisconsin, Biomedical Engineering, Madison, WI. Fax: XX XXXX XXXX; Tel: XX XXXX XXXX
| |
Collapse
|
9
|
Zhou X, Shi J, Hu J, Chen Y. Cells cultured on microgrooves with or without surface coating: correlation between cell alignment, spreading and local membrane deformation. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2012; 33:855-63. [PMID: 25427498 DOI: 10.1016/j.msec.2012.11.011] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/02/2012] [Revised: 10/16/2012] [Accepted: 11/08/2012] [Indexed: 01/18/2023]
Abstract
The behaviors of cells cultured on patterned substrates vary with the material stiffness, the geometry and the biochemical properties of the pattern. By using a reversed cell imprinting (RCI) technique, together with phase contrast microscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM), we have exploited reversed side cellular morphology on patterned microgrooves of different geometries with or without surface coating of adhesion molecules. We have shown a close correlation between the effect of contact guidance and penetration of cellular membrane. Without surface coating, roughly 80% of HeLa cells were aligned along the groove direction regardless of the groove spacing. When the microgrooves were coated with fibronectin, the area of cell spreading was increased but the percentage of aligned cells was significantly decreased. In both cases, the deformation of cell membrane at the cell-pattern interfaces could be measured. We found that the local penetration of the cellular membrane into the grooves was correlated to the cellular alignment for both HeLa and NIH 3T3 cells, and that such a correlation was cell-type dependent.
Collapse
Affiliation(s)
- Xiongtu Zhou
- Ecole Normale Supérieure, CNRS-ENS-UPMC UMR 8640, 24 rue Lhomond, 75231 Paris, France; College of physics and information engineering, Fuzhou University, 350002 Fuzhou, China
| | - Jian Shi
- Ecole Normale Supérieure, CNRS-ENS-UPMC UMR 8640, 24 rue Lhomond, 75231 Paris, France
| | - Jie Hu
- Ecole Normale Supérieure, CNRS-ENS-UPMC UMR 8640, 24 rue Lhomond, 75231 Paris, France
| | - Yong Chen
- Ecole Normale Supérieure, CNRS-ENS-UPMC UMR 8640, 24 rue Lhomond, 75231 Paris, France; Institute for Integrated Cell-Material Science, Kyoto University, Kyoto 606-8507, Japan.
| |
Collapse
|
10
|
Mekala NK, Baadhe RR, Parcha SR, Prameela DY. Osteoblast differentiation of umbilical cord blood-derived mesenchymal stem cells and enhanced cell adhesion by fibronectin. Tissue Eng Regen Med 2012. [DOI: 10.1007/s13770-012-0359-z] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022] Open
|
11
|
Yoon SH, Chang J, Lin L, Mofrad MRK. A biological breadboard platform for cell adhesion and detachment studies. LAB ON A CHIP 2011; 11:3555-3562. [PMID: 21874200 DOI: 10.1039/c1lc20369j] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
The dynamic nature of cell adhesion and detachment, which plays a critical role in a variety of physiological and pathological phenomena, still remains unclear. This motivates the pursuit of controllable manipulation of cell adhesion and detachment for a better understanding of cellular dynamics. Here we present an addressable, multifunctional, and reusable platform, termed the biological breadboard (BBB), for spatiotemporal manipulation of cell adhesion and detachment at cellular and subcellular levels. The BBB, composed of multiple gold electrodes patterned on a Pyrex substrate, is surface-modified with arginine-glycine-aspartic acid terminated thiol (RTT) and polyethylene glycol (PEG) to achieve a cell-adhesive surface on the gold electrodes and a cell-resistive surface on the Pyrex substrate, respectively. Cell adhesion is regulated by the steric repulsion of PEG chains, while cell detachment is controlled by the reductive desorption of a gold-thiol self-assembled monolayer (SAM) at an activation potential of -0.90 to -1.65 V. Experimental characterizations using NIH 3T3 fibroblasts are presented to demonstrate the utility of our device.
Collapse
Affiliation(s)
- Sang-Hee Yoon
- Molecular Cell Biomechanics Laboratory, Department of Bioengineering, University of California, Berkeley, California 94720, USA
| | | | | | | |
Collapse
|
12
|
Cell adhesion and detachment on gold surfaces modified with a thiol-functionalized RGD peptide. Biomaterials 2011; 32:7286-96. [DOI: 10.1016/j.biomaterials.2011.05.077] [Citation(s) in RCA: 42] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2011] [Accepted: 05/26/2011] [Indexed: 01/16/2023]
|
13
|
Sharma RI, Schwarzbauer JE, Moghe PV. Nanomaterials can dynamically steer cell responses to biological ligands. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2011; 7:242-51. [PMID: 21213389 PMCID: PMC3335745 DOI: 10.1002/smll.201001518] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2010] [Indexed: 05/30/2023]
Abstract
Traditional tissue regeneration approaches to activate cell behaviors on biomaterials rely on the use of extracellular-matrix-based or soluble growth-factor cues. In this article, a novel approach is highlighted to dynamically steer cellular phenomena such as cell motility based on nanoscale substratum features of biological ligands. Albumin-derived nanocarriers (ANCs) with variable nanoscale-size features are functionalized with fibronectin III9-10 matrix ligands, and their effects on primary human keratinocyte activation are investigated. The presentation of fibronectin fragments from ANCs significantly enhances cell migration as compared to free ligands at equivalent concentrations. Notably, cell migration is influenced by the size of the underlying ANCs even for variably sized ANCs covered in comparable levels of fibronectin fragment. For equivalent ligand concentrations, cell migration on the smaller-sized ANCs (30 and 50 nm) is significantly enhanced as compared to that on larger-sized ANCs (75 and 100 nm). In contrast, the enhancement of cell migration on nanocarriers is abolished by the use of immobilized, biofunctionalized ANCs, indicating that "dynamic" nanocarrier internalization events underlie the role of nanocarrier geometry on the differential regulation of cell migration kinetics. Uptake studies using fluorescent ANCs indicate that larger-sized ANCs cause delayed endocytic kinetics and hence could present barriers for internalization during the cell adhesion and motility processes. Motile cells exhibit diminished migration upon exposure to clathrin inhibitors, but not caveolin inhibitors, suggesting the role of clathrin-mediated endocytosis in facilitating cell migratory responsiveness to the nanocarriers. Overall, a monotonic relationship is found between the nanocarrier cytointernalization rate and the cell migration rate, suggesting the possibility of designing biointerfacial features for the dynamic control of cell migration. Thus, the functionalization of a mobile nanocarrier by a biorelevant ligand can be used to sensitize cellular motility activation to the adhesion ligands, and such nanocarrier interfaces can dynamically attune cell migration kinetics by modulating the uptake of the ligand-nanocarrier complex via nanocarrier size.
Collapse
Affiliation(s)
- Ram I. Sharma
- Department of Chemical & Biochemical Engineering, Rutgers University, 98 Brett Road, NJ 08854 (USA)
| | - Jean E. Schwarzbauer
- Department of Molecular Biology, Princeton University, Schultz Lab, Princeton, NJ 08544 (USA)
| | - Prabhas V. Moghe
- Department of Chemical & Biochemical Engineering, Rutgers University, 98 Brett Road, NJ 08854 (USA), Department of Biomedical Engineering, Rutgers University, 599 Taylor Road, Piscataway, NJ 08854 (USA)
| |
Collapse
|
14
|
Ribeiro N, Sousa SR, Monteiro FJ. Influence of crystallite size of nanophased hydroxyapatite on fibronectin and osteonectin adsorption and on MC3T3-E1 osteoblast adhesion and morphology. J Colloid Interface Sci 2010; 351:398-406. [PMID: 20810127 DOI: 10.1016/j.jcis.2010.08.013] [Citation(s) in RCA: 67] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2010] [Revised: 07/29/2010] [Accepted: 08/03/2010] [Indexed: 01/14/2023]
Abstract
The characteristic topographical features (crystallite dimensions, surface morphology and roughness) of bioceramics may influence the adsorption of proteins relevant to bone regeneration. This work aims at analyzing the influence of two distinct nanophased hydroxyapatite (HA) ceramics, HA725 and HA1000 on fibronectin (FN) and osteonectin (ON) adsorption and MC3T3-E1 osteoblast adhesion and morphology. Both substrates were obtained using the same hydroxyapatite nanocrystals aggregates and applying the sintering temperatures of 725°C and 1000°C, respectively. The two proteins used in this work, FN as an adhesive glycoprotein and ON as a counter-adhesive protein, are known to be involved in the early stages of osteogenesis (cell adhesion, mobility and proliferation). The properties of the nanoHA substrates had an important role in the adsorption behavior of the two studied proteins and clearly affected the MC3T3-E1 morphology, distribution and metabolic activity. HA1000 surfaces presenting slightly larger grain size, higher root-mean-square roughness (Rq), lower surface area and porosity, allowed for higher amounts of both proteins adsorbed. These substrates also revealed increased number of exposed FN cell-binding domains as well as higher affinity for osteonectin. Regarding the osteoblast adhesion results, improved viability and cell number were found for HA1000 surfaces as compared to HA725 ones, independently of the presence or type of adsorbed protein. Therefore the osteoblast adhesion and metabolic activity seemed to be more sensitive to surfaces morphology and roughness than to the type of adsorbed proteins.
Collapse
Affiliation(s)
- N Ribeiro
- INEB-Instituto de Engenharia Biomédica, Divisão de Biomateriais, Universidade do Porto, Rua do Campo Alegre, 823, 4150-180 Porto, Portugal.
| | | | | |
Collapse
|
15
|
Dan L, Chua CK, Leong KF. Fibroblast response to interstitial flow: A state-of-the-art review. Biotechnol Bioeng 2010; 107:1-10. [DOI: 10.1002/bit.22826] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
16
|
Pendegrass CJ, Middleton CA, Gordon D, Jacob J, Blunn GW. Measuring the strength of dermal fibroblast attachment to functionalized titanium alloys in vitro. J Biomed Mater Res A 2010; 92:1028-37. [PMID: 19296546 DOI: 10.1002/jbm.a.32450] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
The success of intraosseous transcutaneous amputation prostheses (ITAP) relies on soft tissue attachment to prevent infection which leads to implant failure. Fibronectin (Fn) has been shown to enhance dermal fibroblast attachment in vitro, however measurement of cell attachment strength has been indirect; using cell area and immunolocalization of focal adhesion components. In this study, we have developed a flow apparatus to assess the biophysical strength of cell attachment to biomaterials used in ITAP. We have demonstrated that dermal fibroblast attachment strength increases significantly up to 96 h and that data from direct and indirect methods of assessing cell attachment strength have a significant positive correlation. Additionally, we have used direct and indirect assessment methods to demonstrate that dermal fibroblast attachment strength is significantly greater on fibronectin-coated titanium alloy compared with uncoated controls at 1, 4, and 24 hours.
Collapse
Affiliation(s)
- Catherine J Pendegrass
- The Centre for Biomedical Engineering, Institute of Orthopaedics and Musculoskeletal Science, University College London, Stanmore, Middlesex, United Kingdom.
| | | | | | | | | |
Collapse
|
17
|
Chemical and Physical Modifications of Biomaterial Surfaces to Control Adhesion of Cells. ACTA ACUST UNITED AC 2010. [DOI: 10.1007/978-90-481-8790-4_13] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
|
18
|
Young EWK, Simmons CA. Macro- and microscale fluid flow systems for endothelial cell biology. LAB ON A CHIP 2010; 10:143-60. [PMID: 20066241 DOI: 10.1039/b913390a] [Citation(s) in RCA: 147] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
Recent advances in microfluidics have brought forth new tools for studying flow-induced effects on mammalian cells, with important applications in cardiovascular, bone and cancer biology. The plethora of microscale systems developed to date demonstrate the flexibility of microfluidic designs, and showcase advantages of the microscale that are simply not available at the macroscale. However, the majority of these systems will likely not achieve widespread use in the biological laboratory due to their complexity and lack of user-friendliness. To gain widespread acceptance in the biological research community, microfluidics engineers must understand the needs of cell biologists, while biologists must be made aware of available technology. This review provides a critical evaluation of cell culture flow (CCF) systems used to study the effects of mechanical forces on endothelial cells (ECs) in vitro. To help understand the need for various designs of CCF systems, we first briefly summarize main properties of ECs and their native environments. Basic principles of various macro- and microscale systems are described and evaluated. New opportunities are uncovered for developing technologies that have potential to both improve efficiency of experimentation as well as answer important biological questions that otherwise cannot be tackled with existing systems. Finally, we discuss some of the unresolved issues related to microfluidic cell culture, suggest possible avenues of investigation that could resolve these issues, and provide an outlook for the future of microfluidics in biological research.
Collapse
Affiliation(s)
- Edmond W K Young
- Department of Biomedical Engineering, Wisconsin Institutes for Medical Research, University of Wisconsin-Madison, 1111 Highland Avenue, Madison, WI 53705, USA.
| | | |
Collapse
|
19
|
Shim J, Hagerman E, Wu B, Gupta V. Measurement of the tensile strength of cell-biomaterial interface using the laser spallation technique. Acta Biomater 2008; 4:1657-68. [PMID: 18640086 DOI: 10.1016/j.actbio.2008.06.001] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2007] [Revised: 05/26/2008] [Accepted: 06/06/2008] [Indexed: 11/24/2022]
Abstract
A previously developed laser spallation technique to determine the tensile strength of thin film interfaces was successfully adopted to determine the tensile strength of interfaces between three different live mammalian cells (osteoblast, chondrocyte and fibroblast) and polystyrene (untreated and fibronectin coated) and titanium surfaces. No noticeable differences in the interfacial tensile strength values were found across the three cell types on the same substrate although osteoblasts showed slightly lower adhesion strength when cultured on untreated polystyrene surfaces. Significant differences were, however, measured for cells treated on different surfaces. Use of fibronectin increased the interfacial tensile strength for all cell types, and cells bonded much better to titanium than to untreated polystyrene surfaces. Cell interfacial strength was higher when cultured with serum than in a serum-free environment. The results demonstrate the remarkable sensitivity of the laser spallation experiment in determining the effects of local interfacial microstructure and chemistry on cell adhesion.
Collapse
|
20
|
Marcotte L, Tabrizian M. Sensing surfaces: Challenges in studying the cell adhesion process and the cell adhesion forces on biomaterials. Ing Rech Biomed 2008. [DOI: 10.1016/j.rbmret.2007.11.019] [Citation(s) in RCA: 34] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
21
|
Vu HN, Li Y, Casali M, Irimia D, Megeed Z, Yarmush ML. A microfluidic bioreactor for increased active retrovirus output. LAB ON A CHIP 2008; 8:75-80. [PMID: 18094764 DOI: 10.1039/b711577f] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
Retroviruses are one of the most commonly used vectors in ongoing gene therapy clinical trials. To evaluate and advance virus production on the microscale platform, we have created a novel microfluidic bioreactor for continuous retrovirus production. We investigated the growth kinetics of a retroviral packaging cell line in microfluidic bioreactors for several compartment sizes, and packaging cells perfused in the microdevices showed similar growth kinetics to those cultured in conventional static conditions. To evaluate the efficiency of retrovirus production, virus titers from the microdevices were compared to those obtained from static tissue culture. When retrovirus production and collection were maintained at 37 degrees C, virus production levels were comparable for the microdevices and static tissue culture conditions. However, immediate cold storage downstream of the packaging cells in the microdevices resulted in 1.4- to 3.7-fold greater active virus production levels with the microdevices compared to the conventional static conditions over a 5 day period. Lastly, the use of microfluidics for virus production provides a continuous supply of virus supernatant for immediate infection of target cells or for preservation and storage. Such devices will be valuable for the optimization of production and evaluation of retroviruses and other viral vectors for gene therapy applications.
Collapse
Affiliation(s)
- Halong N Vu
- Center for Engineering in Medicine and Department of Surgery, BioMEMS Resource Center, Massachusetts General Hospital, Shriners Hospital for Children, and Harvard Medical School, 51 Blossom Street, Rm. 406, Boston, MA 02114, USA
| | | | | | | | | | | |
Collapse
|
22
|
Hagerman E, Shim J, Gupta V, Wu B. Evaluation of laser spallation as a technique for measurement of cell adhesion strength. J Biomed Mater Res A 2007; 82:852-60. [PMID: 17335015 DOI: 10.1002/jbm.a.31011] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Cell adhesion to material surfaces is one of the fundamental phenomena of cellular response to implanted devices. Controlling the strength, dynamics, and mechanics of cell adhesion offer opportunities for designing novel biomaterials for tissue engineering and biotechnology. Many techniques have been developed for the purpose of quantifying various types of cell-biomaterial interaction. One method to evaluate cell affinity for a biomaterial is to measure the stress required to remove adherent cells from the material. This study investigates the possibility of using laser spallation, a technique previously developed for measuring the tensile strength of thin film interfaces, for evaluation of initial cell attachment strength. MC3T3-E1 preosteoblasts were cultured on fibronectin-coated polystyrene, a surface known to engage cells in receptor mediated adhesion, and untreated polystyrene, which elicit nonspecific adhesion mechanisms during early stages of cell attachment. The laser spallation technique effectively detached cells from polymer substrates and also distinguished relative cell adhesion strengths to surfaces with known differences in cell binding affinities. Scanning electron micrographs determined that cell detachment resulting from laser spallation left a cleaner surface than jet impingement, possibly suggesting a more complete detachment mechanism. Absolute values of adhesion strengths determined by laser spallation were significantly higher than those found using jet impingement, a previously reported hydrodynamic technique.
Collapse
Affiliation(s)
- Elizabeth Hagerman
- Department of Bioengineering, University of California, Los Angeles, California, USA
| | | | | | | |
Collapse
|
23
|
Soumetz FC, Pastorino L, Ruggiero C. Human osteoblast-like cells response to nanofunctionalized surfaces for tissue engineering. J Biomed Mater Res B Appl Biomater 2007; 84:249-55. [PMID: 17514672 DOI: 10.1002/jbm.b.30867] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Cells are sensitive both to the micro/nanotopographic and chemical features of their surrounding environment. The engineering of the surface properties of biomaterials is then critical to develop bioactive devices with which to elicit appropriate cellular responses. To this regard, the layer by layer (LBL) self assembly technique represents a simple and versatile method to modify surface properties by the deposition of ultrathin films with specific and predetermined properties. In this work biomimetic coatings containing fibronectin, an adhesive glycoprotein of the extracellular matrix, were assembled by means of the LBL technique, and tested for the growth of MG63 human osteoblast-like cells, in order to evaluate their potential for the treatment of materials employed in bone-tissue engineering. As a first step the assembly process was optimized by quartz crystal microbalance measurements and subsequently was repeated on nickel/titanium, silicon and glass samples. The results obtained from the investigation of cell response to the modified surfaces, put in evidence that the deposited nanostructured ultrathin films are effective in promoting cell proliferation. Our results show the high potential of the developed bioactive coatings for the engineering of biomimetic implants and for the optimization of their integration with the surrounding tissues.
Collapse
Affiliation(s)
- Federico Caneva Soumetz
- Department of Communication, Computer and System Sciences, University of Genova, Via Opera Pia, 13-16145 Genova, Italy.
| | | | | |
Collapse
|
24
|
Jedlicka SS, Little KM, Nivens DE, Zemlyanov D, Rickus JL. Peptide ormosils as cellular substrates. ACTA ACUST UNITED AC 2007. [DOI: 10.1039/b705393b] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
|
25
|
Bae YH, Johnson PA, Florek CA, Kohn J, Moghe PV. Minute changes in composition of polymer substrates produce amplified differences in cell adhesion and motility via optimal ligand conditioning. Acta Biomater 2006; 2:473-82. [PMID: 16793356 DOI: 10.1016/j.actbio.2006.04.001] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2005] [Revised: 03/15/2006] [Accepted: 04/17/2006] [Indexed: 01/12/2023]
Abstract
We explored the interplay between substratum chemistry of polymeric materials and surface-adsorbed ligand concentration (human plasma fibronectin) in the control of cell adhesion and cell motility. We found that small changes in the chemical composition of a polymeric substratum had different effects on cellular motility--depending on the concentration of preadsorbed fibronectin. We used two tyrosine-derived polyarylates, poly(DTD diglycolate) and poly(DTD glutarate), as substrata for the seeding of NIH-3T3 fibroblasts. The only compositional difference between the two test polymers was that one single oxygen atom in the polymer backbone of poly(DTD diglycolate) had been substituted by a methylene group in the backbone of poly(DTD glutarate), The two polymers had closely matched hydrophobicity and physical properties. Flat, spin-coated surfaces of these polymers were pretreated with different concentrations of human plasma fibronectin (0-20 microg/ml). After seeding with NIH-3T3 fibroblasts, we examined the adhesion and motility behavior of these cells. We found that NIH-3T3 fibroblasts migrated significantly faster on poly(DTD diglycolate), but only when the polymer surfaces were pretreated with intermediate concentrations of fibronectin. Only at these intermediate levels of ligand conditioning, did the presence of an extra oxygen atom in the backbone of poly(DTD diglycolate) relative to poly(DTD glutarate) (i) alter the overall organization/concentration of the fibronectin; (ii) weaken cell attachment strength and inhibited excessive cell spreading; and (iii) promote cell motility kinetics. These findings indicate that the biological effect of minute changes in substratum chemistry is critically dependent on the level of surface-adsorbed cell-binding ligands.
Collapse
Affiliation(s)
- Yong Ho Bae
- Department of Chemical and Biochemical Engineering, Rutgers University, Piscataway, NJ 08854, USA
| | | | | | | | | |
Collapse
|
26
|
Anderson EJ, Falls TD, Sorkin AM, Tate MLK. The imperative for controlled mechanical stresses in unraveling cellular mechanisms of mechanotransduction. Biomed Eng Online 2006; 5:27. [PMID: 16672051 PMCID: PMC1526737 DOI: 10.1186/1475-925x-5-27] [Citation(s) in RCA: 39] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2005] [Accepted: 05/03/2006] [Indexed: 12/04/2022] Open
Abstract
Background In vitro mechanotransduction studies are designed to elucidate cell behavior in response to a well-defined mechanical signal that is imparted to cultured cells, e.g. through fluid flow. Typically, flow rates are calculated based on a parallel plate flow assumption, to achieve a targeted cellular shear stress. This study evaluates the performance of specific flow/perfusion chambers in imparting the targeted stress at the cellular level. Methods To evaluate how well actual flow chambers meet their target stresses (set for 1 and 10 dyn/cm2 for this study) at a cellular level, computational models were developed to calculate flow velocity components and imparted shear stresses for a given pressure gradient. Computational predictions were validated with micro-particle image velocimetry (μPIV) experiments. Results Based on these computational and experimental studies, as few as 66% of cells seeded along the midplane of commonly implemented flow/perfusion chambers are subjected to stresses within ±10% of the target stress. In addition, flow velocities and shear stresses imparted through fluid drag vary as a function of location within each chamber. Hence, not only a limited number of cells are exposed to target stress levels within each chamber, but also neighboring cells may experience different flow regimes. Finally, flow regimes are highly dependent on flow chamber geometry, resulting in significant variation in magnitudes and spatial distributions of stress between chambers. Conclusion The results of this study challenge the basic premise of in vitro mechanotransduction studies, i.e. that a controlled flow regime is applied to impart a defined mechanical stimulus to cells. These results also underscore the fact that data from studies in which different chambers are utilized can not be compared, even if the target stress regimes are comparable.
Collapse
Affiliation(s)
- Eric J Anderson
- Dept. of Mechanical & Aerospace Engineering, Case Western Reserve University, Cleveland, Ohio, USA
| | - Thomas D Falls
- Dept. of Biomedical Engineering, Case Western Reserve University, Cleveland, OH, USA
| | - Adam M Sorkin
- Dept. of Biomedical Engineering, Case Western Reserve University, Cleveland, OH, USA
| | - Melissa L Knothe Tate
- Dept. of Mechanical & Aerospace Engineering, Case Western Reserve University, Cleveland, Ohio, USA
- Dept. of Biomedical Engineering, Case Western Reserve University, Cleveland, OH, USA
| |
Collapse
|
27
|
Sun Y, Latour RA. Comparison of implicit solvent models for the simulation of protein–surface interactions. J Comput Chem 2006; 27:1908-22. [PMID: 17019723 DOI: 10.1002/jcc.20488] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Empirical force field-based molecular simulations can provide valuable atomistic-level insights into protein-surface interactions in aqueous solution. While the implicit treatment of solvation effects is desired as a means of improving simulation efficiency, existing implicit solvent models were primarily developed for the simulation of peptide or protein behavior in solution alone, and thus may not be appropriate for protein interactions with synthetic material surfaces. The objective of this research was to calculate the change in free energy as a function of surface-separation distance for peptide-surface interactions using different empirical force field-based implicit solvation models (ACE, ASP, EEF1, and RDIE with the CHARMM 19 force field), and to compare these results with the same calculations conducted using density functional theory (DFT) combined with the self-consistent reaction field (SCRF) implicit solvation model. These comparisons show that distinctly different types of behavior are predicted with each implicit solvation method, with ACE providing the best overall agreement with DFT/SCRF calculations. These results also identify areas where ACE is in need of improvement for this application and provide a basis for subsequent parameter refinement.
Collapse
Affiliation(s)
- Yu Sun
- Department of Bioengineering, Clemson University, Clemson, South Carolina 29634, USA
| | | |
Collapse
|
28
|
Jiang Y, Chen K, Tang Z, Zeng Z, Yao W, Sun D, Ka W, He D, Wen Z, Chien S. TRAIL gene reorganizes the cytoskeleton and decreases the motility of human leukemic Jurkat cells. ACTA ACUST UNITED AC 2006; 63:471-82. [PMID: 16767747 DOI: 10.1002/cm.20138] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
TRAIL can selectively induce rapid apoptosis of various types of tumor cells. We induced the expression of TRAIL in Jurkat cells, and measured the adhesion of cells to human umbilical vein endothelial cells (HUVECs) and laminin (LN) in a parallel plate flow chamber system and by using a colorimetric method. The apoptosis percentage, cycle distribution, intracellular Ca(2+) concentration, and adhesion molecule expression of the cells were detected by flow cytometry. Cytoskeleton was observed with a laser confocal microscopy. The roles of adhesion molecules in the cell interaction was defined by their function blocking. The results showed that TRAIL attenuated the adhesion of Jurkat cells to HUVECs and LN, as well as their transendothelial migration. The increased apoptosis and G1-phase cell percentages, decreased intracellular Ca(2+) concentration, depolymerized actin and impaired cell deformability could contribute to the decreased adhesion of Jurkat cells caused by TRAIL. Furthermore, CD11a was found to play a more important role than CD62L in the adhesion of Jurkat cells to HUVECs. These findings contribute to the knowledge on the role of TRAIL in tumor metastasis and provide mechanistic basis for the clinical application of TRAIL and tumor therapy.
Collapse
Affiliation(s)
- Yuhui Jiang
- Department of Biophysics, Health Science Center, Peking University, Beijing, People's Republic of China
| | | | | | | | | | | | | | | | | | | |
Collapse
|
29
|
Sun Y, Welsh WJ, Latour RA. Prediction of the orientations of adsorbed protein using an empirical energy function with implicit solvation. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2005; 21:5616-26. [PMID: 15924498 DOI: 10.1021/la046932o] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
When simulating protein adsorption behavior, decisions must first be made regarding how the protein should be oriented on the surface. To address this problem, we have developed a molecular simulation program that combines an empirical adsorption free energy function with an efficient configurational search method to calculate orientation-dependent adsorption free energies between proteins and functionalized surfaces. The configuration space is searched systematically using a quaternion rotation technique, and the adsorption free energy is evaluated using an empirical energy function with an efficient grid-based calculational method. In this paper, the developed method is applied to analyze the preferred orientations of a model protein, lysozyme, on various functionalized alkanethiol self-assembled monolayer (SAM) surfaces by the generation of contour graphs that relate adsorption free energy to adsorbed orientation, and the results are compared with experimental observations. As anticipated, the adsorbed orientation of lysozyme is predicted to be dependent on the discrete organization of the functional groups presented by the surface. Lysozyme, which is a positively charged protein, is predicted to adsorb on its 'side' on both hydrophobic and negatively charged surfaces. On surfaces with discrete positively charged sites, attractive interaction energies can also be obtained due to the presence of discrete local negative charges present on the lysozyme surface. In this case, 'end-on' orientations are preferred. Additionally, SAM surface models with mixed functionality suggest that the interactions between lysozyme and surfaces could be greatly enhanced if individual surface functional groups are able to access the catalytic cleft region of lysozyme, similar to ligand-receptor interactions. The contour graphs generated by this method can be used to identify low-energy orientations that can then be used as starting points for further simulations to investigate conformational changes induced in protein structure following initial adsorption.
Collapse
Affiliation(s)
- Yu Sun
- Department of Bioengineering and Center for Advanced Engineering Fibers & Films (CAEFF), Clemson University, Clemson, South Carolina 29634, USA
| | | | | |
Collapse
|
30
|
Li M, Mills DK, Cui T, Mcshane MJ. Cellular Response to Gelatin- and Fibronectin-Coated Multilayer Polyelectrolyte Nanofilms. IEEE Trans Nanobioscience 2005; 4:170-9. [PMID: 16117025 DOI: 10.1109/tnb.2005.850477] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Surface engineering is a critical effort in defining substrates for cell culture and tissue engineering. In this context, multilayer self-assembly is an attractive method for creating novel composites with specialized chemical and physical properties that is currently drawing attention for potential application in this area. In this work, effects of thickness, surface roughness, and surface material of multilayer polymer nanofilms on the growth of rat aortic smooth muscle cells were studied. Polyelectrolyte multilayers (PEMs) electrostatically constructed from poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) (PSS) with gelatin, fibronectin, and PSS surface coatings were evaluated for interactions with smooth muscle cells (SMCs) in an in vitro environment. The results prove that PEMs terminated with cell-adhesive proteins promote the attachment and further growth of SMCs, and that this property is dependent upon the number of layers in the underlying multilayer film architecture. Cell roundness and number of pseudopodia were also influenced by the number of layers in the nanofilms. These findings are significant in that they demonstrate that both surface coatings and underlying architecture of nanofilms affect the morphology and growth of SMCs, which means additional degrees of freedom are available for design of biomaterials. This work supports the excellent potential of nanoassembled ultrathin films for biosurface engineering, and points to a novel perspective for controlling cell-material interaction that can lead to an elegant system for defining the extracellular in vitro environment.
Collapse
Affiliation(s)
- Mengyan Li
- Institute for Micromanufacturing, Ruston, LA 71272, USA
| | | | | | | |
Collapse
|
31
|
Love JC, Estroff LA, Kriebel JK, Nuzzo RG, Whitesides GM. Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology. Chem Rev 2005; 105:1103-69. [PMID: 15826011 DOI: 10.1021/cr0300789] [Citation(s) in RCA: 4713] [Impact Index Per Article: 248.1] [Reference Citation Analysis] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Affiliation(s)
- J Christopher Love
- Department of Chemistry and Chemical Biology, Harvard University, 12 Oxford Street, Cambridge, Massachusetts 02138, USA
| | | | | | | | | |
Collapse
|
32
|
Vetter M, Blumenthal SG, Lindemann RK, Manns J, Wesselborg S, Thomssen C, Dittmer J. Ets1 is an effector of protein kinase Calpha in cancer cells. Oncogene 2005; 24:650-61. [PMID: 15531915 DOI: 10.1038/sj.onc.1208234] [Citation(s) in RCA: 18] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
PKCalpha and Ets1 are both associated with breast cancer progression. Our previous studies suggested that these proteins are likely to functionally interact with one another. Here, we show that attenuation of endogenous PKCalpha expression (siPalpha) by RNA interference leads to reduced Ets1 protein expression in a variety of cancer cells. Pulse-chase experiments and treatment with proteasome inhibitor MG-132 revealed that siPalpha interferes with both Ets1 protein synthesis and stability. The effect of siPalpha on Ets1 expression could be partially prevented by KN-93, suggesting that calcium/calmodulin-dependent kinase II (CaMKII), a modulator of Ets1 activity, may play a role in PKCalpha-dependent Ets1 regulation. In contrast, Ets1-regulating kinases ERK1/2 were not found to be involved in this process. To assess the importance of the PKCalpha/Ets1 interaction, we compared the biological responses of MDA-MB-231 cells to PKCalpha- and Ets1-specific siRNAs (siE1). While only siPalpha induced changes in cellular morphology and anchorage-independent growth, both siRNAs similarly affected cellular responses to the antitumor drug mithramycin A and to UV light. Microarray analyses further showed that the expression of a certain set of genes was equally affected by siPalpha and siE1. The data suggest that Ets1 serves as an effector for PKCalpha to fulfil certain functions in cancer cells.
Collapse
Affiliation(s)
- Martina Vetter
- Universität Halle-Wittenberg, Universitätsklinik und Poliklinik für Gynäkologie, Ernst-Grube-Str. 40, 06097 Halle (Saale), Germany
| | | | | | | | | | | | | |
Collapse
|
33
|
Toworfe GK, Composto RJ, Adams CS, Shapiro IM, Ducheyne P. Fibronectin adsorption on surface-activated poly(dimethylsiloxane) and its effect on cellular function. ACTA ACUST UNITED AC 2004; 71:449-61. [PMID: 15481053 DOI: 10.1002/jbm.a.30164] [Citation(s) in RCA: 119] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
This article reports that surface modification of poly(dimethylsiloxane) (PDMS) influences fibronectin (Fn) adsorption and enhances cell attachment. Controlled adsorption of Fn on chemically activated polymer substrates is known to influence cellular function. Thin films of PDMS were spun cast on silicon wafers to obtain homogeneous and molecularly smooth surfaces. The films were made hydrophilic by exposure to ultraviolet ozone activation (PDMS*). The films then were characterized by contact angle goniometry, ellipsometry, atomic force microscopy (AFM), Rutherford backscattering spectrometry and X-ray photoelectron spectroscopy. Contact angle measurements indicated higher hydrophobicity of the nonactivated PDMS substrates than PDMS*. AFM scans of the substrates indicated higher surface roughness of PDMS* (Ra = 0.55 nm) than PDMS (Ra = 0.25 nm). Although Fn surface density (Gamma) was slightly higher on PDMS than on PDMS*, due to hydrophobic interactions between substrate and Fn, cell function was greatly enhanced on the Fn-coated PDMS* (PDMS*-Fn) than on PDMS (PDMS-Fn). Higher attachment of MC3T3-E1 osteoblast-like cells was observed on PDMS*-Fn than on PDMS-Fn. Moreover, cell spreading and cytoskeleton organization after 72 h was clearly favored on the Fn-coated PDMS* surfaces.
Collapse
Affiliation(s)
- George K Toworfe
- Center for Bioactive Materials and Tissue Engineering, Department of Bioengineering, University of Pennsylvania School of Engineering and Applied Science, 120 Hayden Hall, 3320 Smith Walk, Philadelphia, Pennsylvania 19104-6392, USA.
| | | | | | | | | |
Collapse
|
34
|
Lee JSH, Chang MI, Tseng Y, Wirtz D. Cdc42 mediates nucleus movement and MTOC polarization in Swiss 3T3 fibroblasts under mechanical shear stress. Mol Biol Cell 2004; 16:871-80. [PMID: 15548602 PMCID: PMC545918 DOI: 10.1091/mbc.e03-12-0910] [Citation(s) in RCA: 75] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023] Open
Abstract
Nucleus movement is essential during nucleus positioning for tissue growth and development in eukaryotic cells. However, molecular regulators of nucleus movement in interphase fibroblasts have yet to be identified. Here, we report that nuclei of Swiss 3T3 fibroblasts undergo enhanced movement when subjected to shear flows. Such movement includes both rotation and translocation and is dependent on microtubule, not F-actin, structure. Through inactivation of Rho GTPases, well-known mediators of cytoskeleton reorganization, we demonstrate that Cdc42, not RhoA or Rac1, controls the extent of nucleus translocation, and more importantly, of nucleus rotation in the cytoplasm. In addition to generating nuclei movement, we find that shear flows also causes repositioning of the MTOC in the direction of flow. This behavior is also controlled by Cdc42 via the Par6/protein kinase Czeta pathway. These results are the first to establish Cdc42 as a molecular regulator of not only shear-induced MTOC polarization in Swiss 3T3 fibroblasts, but also of shear-induced microtubule-dependent nucleus movement. We propose that the movements of MTOC and nucleus are coupled chemically, because they are both regulated by Cdc42 and dependent on microtubule structure, and physically, possibly via Hook/SUN family homologues similar to those found in Caenorhabditis elegans.
Collapse
Affiliation(s)
- Jerry S H Lee
- Department of Chemical and Biomolecular Engineering, The Johns Hopkins University, Baltimore, MD 21218, USA
| | | | | | | |
Collapse
|
35
|
Faucheux N, Schweiss R, Lützow K, Werner C, Groth T. Self-assembled monolayers with different terminating groups as model substrates for cell adhesion studies. Biomaterials 2004; 25:2721-30. [PMID: 14962551 DOI: 10.1016/j.biomaterials.2003.09.069] [Citation(s) in RCA: 442] [Impact Index Per Article: 22.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2003] [Accepted: 09/04/2003] [Indexed: 10/26/2022]
Abstract
Cell shapes induced by cell-substratum interactions are linked with proliferation, differentiation or apoptosis of cells. To clarify the relevance of specific surface characteristics, we applied self-assembled monolayers (SAM) of alkyl silanes exhibiting a variety of terminating functional groups. We first characterised the SAMs on glass or silicon wafers by measuring wettability, layer thickness and roughness. Water contact angle data revealed that methyl (CH(3)), bromine (Br), and vinyl (CH=CH(2)) groups lead to hydrophobic surfaces, while amine (NH(2)) and carboxyl (COOH) functions lead to moderately wettable surfaces, and polyethylene glycol (PEG) and hydroxyl (OH) groups created wettable substrata. The surfaces were found to be molecular smooth except for one type of NH(2) surface. The SDS-PAGE analysis of proteins adsorbed from bovine serum to the SAMs showed less protein adsorption to PEG and OH than to CH(3), NH(2) and COOH. Immunoblotting revealed that a key component of adsorbed proteins is vitronectin while fibronectin was not detectable. The interaction of human fibroblasts with CH(3), PEG and OH terminated SAMs was similarly weak while strong attachment, spreading, fibronectin matrix formation and growth were observed on COOH and NH(2). The strong interaction of fibroblasts with the latter SAMs was linked to an enhanced activity of integrins as observed after antibody-tagging of living cells.
Collapse
Affiliation(s)
- N Faucheux
- GKSS Research Centre, Institute of Chemistry, Department Biomaterials, Biomedical Technology, Kantstrasse 55, D-14513 Teltow, Germany
| | | | | | | | | |
Collapse
|
36
|
Goldstein AS, DiMilla PA. Examination of membrane rupture as a mechanism for mammalian cell detachment from fibronectin-coated biomaterials. J Biomed Mater Res A 2004; 67:658-66. [PMID: 14566810 DOI: 10.1002/jbm.a.10125] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
Synthetic biomaterials intended for the reconstruction of tissues and organs must be capable of sustaining adhesive contact with adjacent cells and tissues under mechanical and hydrodynamic stresses. To facilitate this adhesion, extracellular matrix proteins or peptide sequences are frequently immobilized to the biomaterial interface. These ligands enhance cell attachment by raising the number of cell receptor/ligand interactions, but consequently they may alter the mechanism of cell detachment. In particular, as the cell membrane is more strongly immobilized to the substratum, the tendency for cell detachment to involve membrane rupture may increase. To test this hypothesis, cells were fluorescent stained with a membrane dye, allowed to attach to fibronectin-coated model substrates for 30 min, and then subjected to a spatially dependent range of shear stress for 5 min (28-220 dyn/cm2) using a radial-flow chamber. Phase-contrast and fluorescent images were analyzed to determine the probability for cell detachment and the area of fluorescent debris left by detaching cells as a function of fibronectin concentration, magnitude of shear stress, and time. It was found at all concentrations of fibronectin that the majority of detaching cells left membrane fragments, the mean size of these fragments was independent of shear stress, and the shape independent of the direction of flow. However, mean fragment area increased with concentration of fibronectin and decreased with duration of shearing flow. We postulate that the area of debris reflects the extent of cell attachment prior to the application of shear and that adhesive complexes can disassemble at the onset of flow.
Collapse
Affiliation(s)
- Aaron S Goldstein
- Department of Chemical Engineering, Center for Light Microscope Imaging and Biotechnology, Colloids, Polymers and Surfaces Program, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, USA.
| | | |
Collapse
|
37
|
Kowalczyńska HM, Nowak-Wyrzykowska M, Kołos R, Dobkowski J, Kamiński J. Fibronectin adsorption and arrangement on copolymer surfaces and their significance in cell adhesion. J Biomed Mater Res A 2004; 72:228-36. [PMID: 15625681 DOI: 10.1002/jbm.a.30238] [Citation(s) in RCA: 45] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
The adsorption of fibronectin (FN) to (styrene/methyl methacrylate) copolymer surfaces, both sulfonated (hydrophilic) and nonsulfonated (hydrophobic), was studied by means of the radioisotope (125I-FN) and ELISA assays; the latter employed monoclonal antibodies. It was found that the radioiodination-derived isotherms did not follow the Langmuir-type adsorption law within the FN concentration range studied; rather, a quasi-linear FN surface density versus bulk concentration dependence was observed. These isotherms, and our recent ELISA measurements with polyclonal antibodies, allowed us to estimate saturative FN surface densities, which were, within the experimental error, similar on both types of surfaces. This suggested the amount of adsorbed FN to be not responsible for observed differences in leukaemia L1210 cell adhesion (FN-coated sulfonated surfaces are far more pro-adhesive than their nonsulfonated analogues). The presumption that these differences are induced by changes in the FN arrangement was confirmed by the use of monoclonal antibodies directed against distinct FN domains, and by the blocking of alpha5beta1 integrin receptor with the synthetic Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide. The RGD sequence located within the FN cell-binding domain seems to be masked in the structure adopted on nonsulfonated surfaces, which hinders the integrin-ligand interaction.
Collapse
Affiliation(s)
- Hanna M Kowalczyńska
- Department of Biophysics and Biomathematics, Medical Centre for Postgraduate Education, ul. Marymoncka 99, 01-813 Warszawa, Poland.
| | | | | | | | | |
Collapse
|
38
|
Robinson EE, Zazzali KM, Corbett SA, Foty RA. Alpha5beta1 integrin mediates strong tissue cohesion. J Cell Sci 2003; 116:377-86. [PMID: 12482923 DOI: 10.1242/jcs.00231] [Citation(s) in RCA: 100] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023] Open
Abstract
Integrins and cadherins are considered to have distinct and opposing functions. Integrins are traditionally cited for their role in cell-substratum interactions, whereas cadherins are thought to mediate strong intercellular cohesion. Together, these adhesion systems play crucial roles in a wide variety of cellular and developmental processes including cell migration, morphology, differentiation and proliferation. In this manuscript we present evidence that integrins possess the ability to mediate strong intercellular cohesion when cells are grown as 3D aggregates. Much of the data elucidating the role of integrins as mediators of cell-extracellular matrix (ECM) interactions have been generated using conventional cell culture techniques in which cells are plated onto ECM-coated 2D surfaces. In vivo, cells are embedded in a 3D meshwork of ECM proteins. We hypothesized that, within this meshwork, integrin-ECM interactions may impart cohesivity to an aggregate of cells by linking adjacent cells together. To test this hypothesis, we transfected Chinese hamster ovary (CHO-B2) cells to express alpha5beta1 integrin and found that these cells formed compact, spherical aggregates. We measured aggregate cohesivity using tissue surface tensiometry, a novel technique that quantifies cell-cell cohesivity of spheroids under physiological conditions. We determined that alpha5beta1 integrin is capable of conferring strong cohesivity (sigma=8.22+/-0.68 dynes/cm) to aggregates of alpha5-integrin-transfected cells. This cohesion was found to be independent of cadherin expression and was significantly greater than the cohesivity conferred onto CHO-B2 cells transfected with N-cadherin (sigma=3.14+/-0.20 dynes/cm, P</=0.0001), a more traditional cell-cell cohesion system. Fibronectin-null CHO cells that express alpha5beta1 integrin but do not secrete endogenous fibronectin do not form aggregates in fibronectin-depleted medium. Addition of increasing amounts of exogenous dimeric fibronectin to these cells resulted in a dose-dependent compaction. However, compaction failed to occur in the presence of fibronectin monomers. These data indicate that fibronectin is required for alpha5beta1-mediated compaction and that the dimeric structure of fibronectin is essential for this process. Additionally, aggregate formation of the alpha5 integrin transfectants was inhibited by an RGD peptide thus confirming alpha5beta1 integrin specificity. Collectively, these data confirm our hypothesis that alpha5beta1 integrin acts through fibronectin to link adjacent cells together, thus promoting strong intercellular cohesion in 3D cellular aggregates.
Collapse
Affiliation(s)
- Elizabeth E Robinson
- Department of Surgery, University of Medicine and Dentistry-Robert Wood Johnson Medical School, CAB Room 7070, New Brunswick, NJ 08648, USA
| | | | | | | |
Collapse
|