Comparison of osteoblast responses to hydroxyapatite and hydroxyapatite/soluble calcium phosphate composites

Mechanical properties, and in vitro biocompatibility assessment of biomimetic dual layered keratin/ hydroxyapatite scaffolds

A novel biomimetic dual layered keratin/hydroxyapatite (keratin/HA) scaffold was designed using iterative freeze-drying technique. The prepared scaffolds were studied using several analytical techniques to better understand the biological, structural, and mechanical properties. The developed multilayered, interconnected, porous keratin scaffold with different hydroxyapatite (HA) content in the outer and inner layer, mimics the inherent gradient structure of alveolar bone. SEM studies showed an interconnected porous architecture of the prepared scaffolds with seamless integration between the upper and lower layers. The incorporation of HA improved the mechanical properties keratin/HA scaffolds. The keratin/HA scaffolds exhibited superior mechanical properties in terms of Young's modulus and compressive strength in comparison to pure keratin scaffolds. The biocompatibility studies suggested that both keratin and keratin/HA scaffolds were cyto-compatible, in terms of cell proliferation. Furthermore, it showed that both the tested materials can served as an ideal substrate for the differentiation of Saos-2 cells, leading to mineralization of the extracellular matrix. In summary, ionic liquid based green technique was employed for keratin extraction to fabricate keratin/HA scaffolds and our detailed in vitro investigations suggest the great potential for these composite scaffolds for bone tissue engineering in future.

A novel injectable hydrogel containing polyetheretherketone for bone regeneration in the craniofacial region

Polyetheretherketone (PEEK) is an organic material introduced as an alternative for titanium implants. Injectable hydrogels are the most promising approach for bone regeneration in the oral cavity to fill the defects with irregular shapes and contours conservatively. In the current study, injectable Aldehyde-cellulose nanocrystalline/silk fibroin (ADCNCs/SF) hydrogels containing PEEK were synthesized, and their bone regeneration capacity was evaluated. Structure, intermolecular interaction, and the reaction between the components were assessed in hydrogel structure. The cytocompatibility of the fabricated scaffolds was evaluated on human dental pulp stem cells (hDPSCs). Moreover, the osteoinduction capacity of ADCNCs/SF/PEEK hydrogels on hDPSCs was evaluated using Real-time PCR, Western blot, Alizarin red staining and ALP activity. Bone formation in critical-size defects in rats' cranial was assessed histologically and radiographically. The results confirmed the successful fabrication of the hydrogel and its osteogenic induction ability on hDPSCs. Furthermore, in in vivo phase, bone formation was significantly higher in ADCNCs/SF/PEEK group. Hence, the enhanced bone regeneration in response to PEEK-loaded hydrogels suggested its potential for regenerating bone loss in the craniofacial region, explicitly surrounding the dental implants.

Characterization of a cotton-wool like composite bone graft material

Bone graft materials are applied in patients to augment bone defects and enable the insertion of an implant in its ideal position. However, the currently available augmentation materials do not meet the requirements of being completely resorbed and replaced by new bone within 3 to 6 months. A novel electrospun cotton-wool like material (Bonewool^®, Zurich Biomaterials LLC, Zurich, Switzerland) consisting of biodegradable poly(lactic-co-glycolic) acid (PLGA) fibers with incorporated amorphous ß-tricalcium phosphate (ß-TCP) nanoparticles has been compared to a frequently used bovine derived hydroxyapatite (Bio-Oss^®, Geistlich Pharma, Wolhusen, Switzerland) in vitro. The material composition was determined and the degradation behavior (calcium release and pH in different solutions) as well as bioactivity has been measured. Degradation behavior of PLGA/ß-TCP was generally more progressive than for Bio-Oss^®, indicating that this material is potentially completely resorbable. Graphical abstract.

Effect of Hydroxyapatite Nanoparticles and Nitrogen Plasma Treatment on Osteoblast Biological Behaviors of 3D-Printed HDPE Scaffold for Bone Tissue Regeneration Applications

The need for the repair of bone defects has been increasing due to various causes of loss of skeletal tissue. High density polyethylenes (HDPE) have been used as bone substitutes due to their excellent biocompatibility and mechanical strength. In the present study, we investigated the preosteoblast cell proliferation and differentiation on the adding nano-hydroxyapatite (n-HAp) particles into HDPE scaffold and treating HDPE/n-HAp scaffolds with nitrogen (N₂) plasma. The three-dimensional (3D) HDPE/n-HAp scaffolds were prepared by fused modeling deposition 3D printer. The HDPE/n-HAp was blended with 10 wt% of n-HAp particle. The scaffold surface was reactive ion etched with nitrogen plasma to improve the preosteoblast biological response in vitro. After N₂ plasma treatment, surfaces characterizations were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. The proliferation and differentiation of preosteoblast (MC3T3-E1) cells were evaluated by MTT assay and alkaline phosphatase (ALP) activity. The incorporation of n-HAp particles and N₂ plasma surface treatment showed the improvement of biological responses of MC3T3-E1 cells in the HDPE scaffolds.

Beta-phase Stabilization and Increased Osteogenic Differentiation of Stem Cells by Solid-State Synthesized Magnesium Tricalcium Phosphate

In this study, magnesium and strontium-doped β-tricalcium phosphates were synthesized to understand dopant impact on substrate chemistry and morphology, and proliferation and osteogenic differentiation of mesenchymal stem cells. Under solid-state synthesis, magnesium doping stabilized the β-phase in tricalcium phosphate, with 22% less α-phase content than control. Strontium doping increased α-phase formation by 17%, and also resulted in greater surface porosity, leading to greater crystal precipitation in vitro. Magnesium also significantly enhanced the proliferation of stem cells (P < 0.05) and differentiation into osteoblasts with increased alkaline phosphatase production (P < 0.05) at all time points. These results indicated that magnesium stabilizes β-tricalcium phosphate in vitro and enhanced early and late-time-point osteoconduction and osteoinduction of mesenchymal stem cells.

Mechanical Properties and Bioactivity of Polyetheretherketone/Hydroxyapatite/Carbon Fiber Composite Prepared by the Mechanofusion Process

The main obstacles in the melt-processing of hydroxyapatite (HA) and carbon fiber (CF) reinforced polyetheretherketone (PEEK) composite are the high melting temperature of PEEK, poor dispersion of HA nanofillers, and poor processability due to high filler content. In this study, we prepared PEEK/HA/CF ternary composite using two different non-melt blending methods; suspension blending (SUS) in ethanol and mechanofusion process (MF) in dry condition. We compared the mechanical properties and bioactivity of the composite in a spinal cage application in the orthopedic field. Results showed that the PEEK/HA/CF composite made by the MF method exhibited higher flexural and compressive strengths than the composite prepared by the SUS method due to the enhanced dispersibility of HA nanofiller. On the basis of in vitro cell compatibility and cell attachment tests, PEEK/HA/CF composite by mechanofusion process showed an improvement in in vitro bioactivity and osteo-compatibility.

Synthesis and characterization of nano-hydroxyapatite from Sardinella longiceps fish bone and its effects on human osteoblast bone cells

Organic debris in the form of fish bone wastes account to several thousand tons annually. In recent years, researchers have turned attention towards the bioconversion of organic debris into materials with biomedical applications. Accordingly, the present study synthesized nano-Hydroxyapatite (n-HAP) from bones of discarded Sardinella longiceps by the alkaline hydrolysis method. The synthesized n-HAP was characterized by using the scanning electron microscope (SEM), X-ray diffraction (XRD), atomic force microscope (AFM), and Fourier transform infrared spectroscopy (FTIR). Crushed fish bone demonstrated an agglomerate of fine and rod-like crystals as observed in SEM, whereas n-HAP exhibited a structure of dense thick particles. FTIR spectral data confirmed the functional groups such as alkanes, esters, saturated aliphatic, and aromatic groups. XRD analysis exhibited strong diffraction peaks of HAP confirming its presence in synthesized n-HAP. AFM analysis affirmed that the synthesized particles had an average size of 19.65 nm. Cell viability was tested at different concentrations (10, 50, 100, 250 μg/mL) against human osteoblast bone cells (MG-63).The maximum cell viability (141.3 ± 3.1%) was observed at 100 μg/mL (24 h). Mineralization was evaluated using Alizarin red staining of osteoblast MG-63 cells treated with n-HAP at the concentration of 50 and 100 μg/mL (0.54 ± 0.03 and 0.99 ± 0.05%) which exhibited red color indicating good results. The size, morphology, functional groups, viability and mineralization of the synthesized n-HAP are favorable for its use in bone tissue engineering and other potential osteo and dental applications.

The shape-effect of calcium phosphate nanoparticle based films on their osteogenic properties

Calcium phosphates (CaPs) in the form of hydroxyapatite (HA) have been extensively studied in the context of bone regeneration due to their chemical similarity to natural bone mineral. While HA is known to promote osteogenic differentiation, the structural properties of the ceramic have been shown to affect the extent of this effect; several studies have suggested that nanostructured HA can improve the bioactivity. However, the role shape plays in the osteogenic potential is more elusive. Here we studied the effect of HA nanoparticle shape on the ability to induce osteogenesis in human mesenchymal stromal cells (hMSCs) by developing nanoparticle films using needle-, rice- and spherical-shaped HA. We showed that the HA films made from all three shapes of nanoparticles induced increased levels of osteogenic markers (i.e. runt-related transcription factor 2 (RUNX2), bone morphogenetic protein 2 (BMP2), alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) on protein and gene level in comparison to hMSCs cultured on cover glass slides. Furthermore, their expression levels and profiles differed significantly as a function of nanoparticle shape. We also showed that nanoparticle films were more efficient in inducing osteogenic gene expression in hMSCs compared to adding nanoparticles to hMSCs in culture media. Finally, we demonstrated that hMSC morphology upon adhesion to the HA nanoparticle films is dependent on nanoparticle shape, with hMSCs exhibiting a more spread morphology on needle-shaped nanoparticle films compared to hMSCs seeded on rice- and spherical-shaped nanoparticle films. Our data suggests that HA nanoparticle films are efficient in inducing hMSC osteogenesis in basic cell culture conditions and that nanoparticle shape plays a vital role in cell adhesion and morphology and extent of induction of osteogenic differentiation.

The osteogenic differentiation of human dental pulp stem cells in alginate-gelatin/Nano-hydroxyapatite microcapsules

Background

Microcapsule is considered as a promising 3D microenvironment for Bone Tissue Engineering (BTE) applications. Microencapsulation of cells in an appropriate scaffold not only protected the cells against excess stress but also promoted cell proliferation and differentiation. Through the current study, we aimed to microcapsulate the human Dental Pulp Stem Cells (hDPSCs) and evaluated the proliferation and osteogenic differentiation of those cells by using MTT assay, qRT-PCR, Alkaline phosphatase, and Alizarine Red S.

Results

The SEM results revealed that Alg/Gel microcapsules containing nHA showed a rough and more compact surface morphology in comparison with the Alg/Gel microcapsules. Moreover, the microencapsulation by Alg/Gel/nHA could improve cell proliferation and induce osteogenic differentiation. The cells cultured in the Alg/Gel and Alg/Gel/nHA microcapsules showed 1.4-fold and 1.7-fold activity of BMP-2 gene expression more in comparison with the control group after 21 days. The mentioned amounts for the BMP-2 gene were 2.5-fold and 4-fold more expression for the Alg/Gel and Alg/Gel/nHA microcapsules after 28 days. The nHA, addition to hDPSCs-laden Alg/Gel microcapsule, could up-regulate the bone-related gene expressions of osteocalcin, osteonectin, and RUNX-2 during the 21 and 28 days through the culturing period, too. Calcium deposition and ALP activities of the cells were observed in accordance with the proliferation results as well as the gene expression analysis.

Conclusion

The present study demonstrated that microencapsulation of the hDPSCs inside the Alg/Gel/nHA hydrogel could be a potential approach for regenerative dentistry in the near future.

Graphical abstract

Design and evaluation of collagen-inspired mineral-hydrogel nanocomposites for bone regeneration

Bone loss due to trauma and tumors remains a serious clinical concern. Due to limited availability and disease transmission risk with autografts and allografts, calcium phosphate bone fillers and growth factor-based substitute bone grafts are currently used in the clinic. However, substitute grafts lack bone regeneration potential when used without growth factors. When used along with the added growth factors, they lead to unwanted side effects such as uncontrolled bone growth. Collagen-based hydrogel grafts available on the market fail to provide structural guidance to native cells due to high water-solubility and faster degradation. To overcome these limitations, we employed bioinspired material design and fabricated three different hydrogels with structural features similar to native collagen at multiple length-scales. These hydrogels fabricated using polyionic complexation of oppositely charged natural polysaccharides exhibited multi-scale architecture mimicking nanoscale banding pattern, and microscale fibrous structure of native collagen. All three hydrogels promoted biomimetic apatite-like mineral deposition in vitro elucidating crystalline structure on the surface while amorphous calcium phosphate inside the hydrogels resulting in mineral-hydrogel nanocomposites. When evaluated in a non-load bearing critical size mouse calvaria defect model, chitosan - kappa carrageenan mineral-hydrogel nanocomposites enhanced bone regeneration without added growth factors compared to empty defect as well as widely used marketed collagen scaffolds. Histological assessment of the regenerated bone revealed improved healing and tissue remodeling with mineral-hydrogel nanocomposites. Overall, these collagen-inspired mineral-hydrogel nanocomposites showed multi-scale hierarchical structure and can potentially serve as promising bioactive hydrogel to promote bone regeneration. STATEMENT OF SIGNIFICANCE: Hydrogels, especially collagen, are widely used in bone tissue engineering. Collagen fibrils play arguably the most important role during natural bone development. Its multi-scale hierarchical structure to form fibers from fibrils and electrostatic charges enable mineral sequestration, nucleation, and growth. However, bulk collagen hydrogels exhibit limited bone regeneration and are mostly used as carriers for highly potent growth factors such as bone morphogenic protein-2, which increase the risk of uncontrolled bone growth. Thus, there is an unmet clinical need for a collagen-inspired biomaterial that can recreate structural hierarchy, mineral sequestration ability, and stimulate recruitment of host progenitor cells to facilitate bone regeneration. Here, we propose collagen-inspired bioactive mineral-hydrogel nanocomposites as a growth factor-free approach to guide and enhance bone regeneration.

Injectable thermosensitive hybrid hydrogel containing graphene oxide and chitosan as dental pulp stem cells scaffold for bone tissue engineering

Here, we fabricated thermosensitive injectable hydrogel containing poly (N-isopropylacrylamide) (PNIPAAm)-based copolymer/graphene oxide (GO) composite with different feed ratio to chitosan (CS) as a natural polymer through physical and chemical crosslinking for the proliferation and differentiation of the human dental pulp stem cells (hDPSCs) to the osteoblasts. The PNIPAAm copolymer/GO composite was synthesized by free-radical copolymerization of (N-isopropylacrylamide) (NIPAAm), itaconic acid (IA) and maleic anhydride-modified poly(ethylene glycol) (PEG) in the presence of GO and used for the preparation of the hydrogels. The formulated hydrogels were evaluated for the porous architecture, rheological behavior, compressive strength, swelling property, in vitro degradation, hemocompatibility, biocompatibility, and differentiation. The hydrogel could enhance the deposition of minerals and the activity of alkaline phosphatase (ALP), in large part attributable to the oxygen and amine-containing functional groups of GO and CS. The engineered hydrogel could also upregulate the expression of the Runt-related transcription factor 2 and osteocalcin in the hDPSCs cultivated in both the normal and osteogenic media. It seems to promote the absorption of osteogenic inducer too. Based on our findings, the engineered hydrogel demonstrated the osteogenic potential, upon which it is proposed as a constructing scaffold in bone tissue engineering for the transplantation of hDPSCs.

Functionalization of Silk Fibers by PDGF and Bioceramics for Bone Tissue Regeneration

Bone regeneration is a complex, well-organized physiological process of bone formation observed during normal fracture healing and involved in continuous remodeling throughout adult life. An ideal medical device for bone regeneration requires interconnected pores within the device to allow for penetration of blood vessels and cells, enabling material biodegradation and bone ingrowth. Additional mandatory characteristics include an excellent resorption rate, a 3D structure similar to natural bone, biocompatibility, and customizability to multiple patient-specific geometries combined with adequate mechanical strength. Therefore, endless silk fibers were spun from native silk solution isolated from silkworm larvae and functionalized with osteoconductive bioceramic materials. In addition, transgenic silkworms were generated to functionalize silk proteins with human platelet-derived growth factor (hPDGF). Both, PDGF-silk and bioceramic modified silk were then assembled into 3D textile implants using an additive manufacturing approach. Textile implants were characterized in terms of porosity, compressive strength, and cyclic load. In addition, osteogenic differentiation of mesenchymal stem cells was evaluated. Silk fiber-based 3D textile implants showed good cytocompatibility and stem cells cultured on bioceramic material functionalized silk implants were differentiating into bone cells. Thus, functionalized 3D interconnected porous textile scaffolds were shown to be promising biomaterials for bone regeneration.

Bioactive calcium phosphate materials and applications in bone regeneration

BACKGROUND

Bone regeneration involves various complex biological processes. Many experiments have been performed using biomaterials in vivo and in vitro to promote and understand bone regeneration. Among the many biomaterials, calcium phosphates which exist in the natural bone have been conducted a number of studies because of its bone regenerative property. It can be directly contributed to bone regeneration process or assist in the use of other biomaterials. Therefore, it is widely used in many applications and has been continuously studied.

MAINBODY

Calcium phosphate has been widely used in bone regeneration applications because it shows osteoconductive and in some cases osteoinductive features. The release of calcium and phosphorus ions regulates the activation of osteoblasts and osteoclasts to facilitate bone regeneration. The control of surface properties and porosity of calcium phosphate affects cell/protein adhesion and growth and regulates bone mineral formation. Properties affecting bioactivity vary depending on the types of calcium phosphates such as HAP, TCP and can be utilized in various applications because of differences in ion release, solubility, stability, and mechanical strength. In order to make use of these properties, different calcium phosphates have been used together or mixed with other materials to complement their disadvantages and to highlight their advantages. Calcium phosphate has been utilized to improve bone regeneration in ways such as increasing osteoconductivity for bone ingrowth, enhancing osteoinductivity for bone mineralization with ion release control, and encapsulating drugs or growth factors.

CONCLUSION

Calcium phosphate has been used for bone regeneration in various forms such as coating, cement and scaffold based on its unique bioactive properties and bone regeneration effectiveness. Additionally, several studies have been actively carried out to improve the efficacy of calcium phosphate in combination with various healing agents. By summarizing the properties of calcium phosphate and its research direction, we hope that calcium phosphate can contribute to the clinical treatment approach for bone defect and disease.

Fabrication and biological properties of calcium phosphate/chitosan composite coating on titanium in modified SBF

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite was in situ combined into the spin-coated chitosan layer on the titanium substrate by incubating in modified simulated body fluid (m-SBF). The calcium phosphate/chitosan (CaP/CS) composite prepared in m-SBF showed a homogeneous distribution of spherical nano-clusters. The hydrophilicity of the coatings was increased by performing NaOH post-treatment of CaP/CS composites, which also affected apatite formation. Biocompatibility of the coatings was assessed by investigating the cellular response of human osteoblast-like MG-63 cells with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Cell adhesion and osteogenic properties of the mesoporous CaP/CS composite were evaluated by SEM and ALPase assay, respectively. This in vitro study showed improved cell adhesion and differentiation on nanostructured CaP/CS composites. These results indicate that this CaP/CS composite could be a promising candidate for bone tissue engineering.

Silk fibroin/chitosan thin film promotes osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells

As a biodegradable polymer thin film, silk fibroin/chitosan composite film overcomes the defects of pure silk fibroin and chitosan films, respectively, and shows remarkable biocompatibility, appropriate hydrophilicity and mechanical properties. Silk fibroin/chitosan thin film can be used not only as metal implant coating for bone injury repair, but also as tissue engineering scaffold for skin, cornea, adipose, and other soft tissue injury repair. However, the biocompatibility of silk fibroin/chitosan thin film for mesenchymal stem cells, a kind of important seed cell of tissue engineering and regenerative medicine, is rarely reported. In this study, silk fibroin/chitosan film was prepared by solvent casting method, and the rat bone marrow-derived mesenchymal stem cells were cultured on the silk fibroin/chitosan thin film. Osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells were induced, respectively. The proliferation ability, osteogenic and adipogenic differentiation abilities of rat bone marrow-derived mesenchymal stem cells were systematically compared between silk fibroin/chitosan thin film and polystyrene tissue culture plates. The results showed that silk fibroin/chitosan thin film not only provided a comparable environment for the growth and proliferation of rat bone marrow-derived mesenchymal stem cells but also promoted their osteogenic and adipogenic differentiation. This work provided information of rat bone marrow-derived mesenchymal stem cells behavior on silk fibroin/chitosan thin film and extended the application of silk fibroin/chitosan thin film. Based on the results, we suggested that the silk fibroin/chitosan thin film could be a promising material for tissue engineering of bone, cartilage, adipose, and skin.

Synthesis of the New-Type Vascular Endothelial Growth Factor-Silk Fibroin-Chitosan Three-Dimensional Scaffolds for Bone Tissue Engineering and In Vitro Evaluation

The objective of the study was to discuss the biocompatibility of the vascular endothelial growth factor-silk fibroin-chitosan (VEGF-SF-CS) scaffolds. To offer an ideal scaffold for bone tissue engineering, the author added vascular endothelial growth factor (VEGF) into silk fibroin-chitosan (SF-CS) scaffold directly to reconstruct a three-dimensional scaffold for the first time, SF-CS scaffold was loaded with VEGF and evaluated as a growth factor-delivery device. Human fetal osteoblast cell was seeded on the VEGF-SF-CS scaffolds and SF-CS scaffolds. On VEGF-SF-CS and SF-CS scaffolds, the cell adhesion rate was increased as time went on. Scanning electron microscopy: the cells grew actively and had normal multiple fissions, granular and filamentous substrates could be seen around the cells, and cell microfilaments were closely connected with the scaffolds. The cells could not only show the attached growth on surfaces of the scaffolds, but also extend into the scaffolds. Cell Counting Kit-8 and alkaline phosphatase analysis proved that the VEGF could significantly promote human fetal osteoblast1.19 cells growth and proliferation in the SF-CS scaffolds, but the enhancement of osteoblasts cell proliferation and activity by VEGF was dependent on time.

Effects of the surface characteristics of nano-crystalline and micro-particle calcium phosphate/chitosan composite films on the behavior of human mesenchymal stem cells in vitro

Calcium phosphate (CaP) compounds, the main inorganic constituent of mammalian bone tissues, are believed to support bone precursor cell growth and osteogenic differentiation. Chitosan, a deacetylated derivative of chitin, is a versatile biopolymer to offer broad possibilities for cell-based tissue engineering. In the present study, different scales of CaP crystals on chitosan membranes were prepared for culture of human mesenchymal stem cells (hMSCs) in vitro. A series of aqueous CaP suspensions with different concentrations were mixed with chitosan solution and chitosan/calcium phosphate (C/CaP) films were fabricated by the solvent-casting method. With different weight ratios of CaP in chitosan solution, the various surface characteristics of nano-amorphous (C/CaP 0.1), nano-crystalline (C/CaP 0.5) and micro-particle (C/CaP 2) CaP compounds were examined by scanning electron microscopy and electron dispersion spectroscopy. X-ray diffraction on micro-particles of CaP indicated the formation of crystalline hydroxyapatite. The behavior of hMSCs, including proliferation, cell spreading and osteogenic differentiation, was studied on the C/CaP films. In basal culture medium, the incorporation of CaP into chitosan films could promote the proliferation of hMSCs. The C/CaP 0.5 film with connected CaP nano-crystals had better cellular viability. The fluorescence microscope images at 14 days of culture revealed extensive networks of F-actin filaments of hMSCs on chitosan, C/CaP 0.1 and C/CaP 0.5 films. The cellular morphology on C/CaP 2 film with discrete CaP micro-particles was partly restrained. In osteogenic medium, the alkaline phosphatase (ALP) activity of hMSCs increased and showed the process of osteogenic differentiation. The ALP levels on C/CaP 2 film were higher than those on C/CaP 0.1 and C/CaP 0.5 films. These results demonstrated that the crystallinity and topography of CaP on chitosan membranes could modulate the behaviors of cultured hMSCs in vitro.

Modulation of Bone-Specific Tissue Regeneration by Incorporating Bone Morphogenetic Protein and Controlling the Shell Thickness of Silk Fibroin/Chitosan/Nanohydroxyapatite Core-Shell Nanofibrous Membranes

The presence of both osteoconductive and osteoinductive factors is important in promoting stem cell differentiation toward the osteogenic lineage. In this study, we prepared silk fibroin/chitosan/nanohydroxyapatite/bone morphogenetic protein-2 (SF/CS/nHAP/BMP-2, SCHB2) nanofibrous membranes (NFMs) by incorporating BMP-2 in the core and SF/CS/nHAP as the shell layer of a nanofiber with two different shell thicknesses (SCHB2-thick and SCHB-thin). The physicochemical properties of SCHB2 membranes were characterized and compared with those of SF/CS and SF/CS/nHAP NFMs. When tested in release studies, the release rate of BMP-2 and the concentration of BMP-2 in the release medium were higher for SCHB2-thin NFMs because of reduced shell thickness. The BMP-2 released from the nanofiber retained its osteoinductive activity toward human-bone-marrow-derived mesenchymal stem cells (hMSCs). Compared with SF/CS and SF/CS/nHAP NFMs, the incorporation of BMP-2-promoted osteogenic differentiation of hMSCs and the SCHB-thin NFM is the best scaffold during in vitro cell culture. Gene expression analysis by real-time quantitative polymerase chain reaction detected the evolution of both early and late marker genes of bone formation. The relative mRNA expression is in accordance with the effect of BMP-2 incorporation and shell thickness, while the same was reconfirmed through the quantification of bone marker protein osteocalcin. In vivo experiments were carried out by subcutaneously implanting hMSC-seeded SCHB2-thin NFMs and acellular controls on the back sides of nude mice. Immunohistochemical and histological staining confirmed ectopic bone formation and osteogenesis of hMSCs in SCHB2-thin NFMs. In conclusion, the SCHB2-thin NFM could be suggested as a promising scaffold for bone tissue engineering.

Structural and phase characterization of bioceramics prepared from tetracalcium phosphate-monetite cement and in vitro osteoblast response

Biphasic porous calcium phosphate ceramics was prepared by sintering of transformed tetracalcium phosphate-monetite cement. After annealing hydroxyapatite, β- or α-TCP were found as main phases in ceramic substrates and a highly microporous microstructure of cement ceramics was created without an addition of porosifier. The origin microstructure features characteristic by the presence of hollow particle agglomerates in cement were preserved in microstructure of cement ceramics after annealing but the hydroxyapatite particles rose in size up to 2 µm and obtained a more regular shape. A small decrease in compressive strength was demonstrated in ceramics sintered up to 1150 °C and enhanced osteoblast proliferation was revealed on cement ceramic substrates in comparison with cement sample and conventional ceramics. The ALP activity of osteoblasts decreased with rise in sintering temperature. The prepared cement microporous ceramics could be utilized as carrier for antibiotics, drugs, growth factors, enzymes or other substances stimulating healing process.

Effect of microstructure characteristics on tetracalcium phosphate-nanomonetite cement in vitro cytotoxicity

MC3T3E1 murine pre-osteoblastic cells were used to evaluate the cytotoxicity of tetracalcium phosphate (TTCP)-nanomonetite (DCPA) cement. The starting cement powder mixture was prepared by the in situ reaction between TTCP and a diluted solution of orthophosphoric acid in a planetary ball mill. The cements in the form of pressed cement powder mixture discs differ from each other by the method of pre-treatment and degree of the transformation of cement components in phosphate-buffered saline (PBS). For the evaluation of TTCP-DCPA cement to be non-cytotoxic, it was sufficient to apply the short-time soaking in PBS solution, regardless of whether the cement components were completely transformed or not. If the texture motif and hydroxyapatite particle morphology were properly developed during the initial stage of hardening, the cement cytotoxicity or osteoblast proliferation were insignificantly influenced by the soaking time or the texture stability during cell cultivation, but the lattice ordering enhanced cell proliferation. Results showed that the surface texture and the hydroxyapatite particle morphology are crucial for in vitro cement cytotoxicity evaluation.

Response of human mesenchymal stem cells to intrafibrillar nanohydroxyapatite content and extrafibrillar nanohydroxyapatite in biomimetic chitosan/silk fibroin/nanohydroxyapatite nanofibrous membrane scaffolds

Incorporation of nanohydroxyapatite (nHAP) within a chitosan (CS)/silk fibroin (SF) nanofibrous membrane scaffold (NMS) may provide a favorable microenvironment that more closely mimics the natural bone tissue physiology and facilitates enhanced osteogensis of the implanted cell population. In this study, we prepared pristine CS/SF NMS, composite CS/SF/nHAP NMS containing intrafibrillar nHAP by in situ blending of 10% or 30% nHAP before the electrospinning step, and composite CS/SF/nHAP NMS containing extrafibrillar nHAP by depositing 30% nHAP through alternative soaking surface mineralization. We investigated the effect of the incorporation of HAP nanoparticles on the physicochemical properties of pristine and composite NMS. We confirmed the presence of ~30 nm nHAP in the composite nanofibrous membranes by thermogravimetry analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), either embedded in or exposed on the nanofiber. Nonetheless, the alternative soaking surface mineralization method drastically influenced the mechanical properties of the NMS with 88% and 94% drop in Young’s modulus and ultimate maximum stress. Using in vitro cell culture experiments, we investigated the effects of nHAP content and location on proliferation and osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSCs). The proliferation of hMSCs showed no significant difference among pristine and composite NMS. However, the extent of osteogenic differentiation of hMSCs was found to be positively correlated with the content of nHAP in the NMS, while its location within the nanofiber played a less significant role. In vivo experiments were carried out with hMSCs seeded in CS/SF/30%nHAP NMS prepared by in situ blending and subcutaneous implantation in nude mice. Micro-computed tomography images as well as histological and immunohistochemical analysis of the retrieved hMSCs/NMS construct 1 and 2 months postimplantation indicated that NMS had the potential for bone regeneration and can be suggested as a promising scaffold for bone tissue engineering.

Effect of Strontium Enhanced Calcium Phosphate Coating on <i>In Vitro</i> Behavior of Human Mesenchymal Stem Cell (hMSC)

Calcium phosphate is a widely used material as coating for metallic implants. This research describes a biomimetic coating techniques based on deposition of calcium phosphate films on a Ti6Al4V plates that was used to study the effect of strontium additive on the behavior of hMSCs. In this study, strontium additive was homogenously deposited onto calcium phosphate films on a Ti6AlV plates by using a biomimetic techniques. Strontium affected composition and morphology of calcium phosphate deposited on a Ti6Al4V plates to a varying degree, according to concentration of solutions used. The effect of strontium additive on proliferation and differentiation of hMSCs depended on the solution and concentration tested. In general, all individual three coatings showed decreased hMSCs proliferation. Strontium additive demonstrated a significant increase in differentiation into osteogenic lineage when compared with the control and calcium phosphate films without strontium additive. However, no cytotoxic effect of strontium additive in the concentrations tested was detected. The Fourier transform infrared spectra showed that this new coating closely resembles bone mineral. The techniques illustrated in this study mimics bone mineral containing strontium additive, making it constructive for studying basic processes of in vitro bone formation. The results showed in this study can be used for changing bone graft substitutes by addition of strontium additive on implants in order to affect their performance in bone repair and regeneration. Also, the system can aid rapid bone formation around the implant, reducing therewith the patient’s recovery time after surgery.

Electrospun poly(butylene carbonate) membranes for guided bone regeneration: In vitro and in vivo studies

A nonwoven membrane for guided bone regeneration, constituting of poly(butylene carbonate), with a backbone that is similar to poly(ϵ-caprolactone), was prepared by electrospinning. The as-fabricated poly(butylene carbonate) membranes were to be used as guided bone regeneration membranes with efficacies equal to or better than poly(ϵ-caprolactone) membranes. The contact angles of electrospun poly(butylene carbonate) membranes (fPBC) (101.90 ± 4.19°) were lower than those for electrospun poly(ϵ-caprolactone) membranes (fPCL) (117.79 ± 3.38°) ( p < 0.01). To examine the biocompatibility, we investigated cell morphology, proliferation, and differentiation in vitro. The bone regenerative efficacy was evaluated in rat calvarial defect. The cell numbers were increased in accordance with culture period. Cells had a stellate shape and broad cytoplasmic extensions on the membrane. Alkaline phosphatase activity was significantly higher on fPBC than on fPCL ( p < 0.05). Defects covered by fPBC and fPCL achieved a similar degree of regeneration at 4 weeks in vivo and were significantly better than uncovered samples ( p < 0.01).Based on the results of this study, the potential for using electrospun poly(butylene carbonate) membranes in guided bone regeneration is highly significant . In addition, poly(butylene carbonate) could be a promising alternative to poly(ϵ-caprolactone) for biomedical applications.

In vitro and in vivo performance of bioactive Ti6Al4V/TiC/HA implants fabricated by a rapid microwave sintering technique

Failure of the bone-implant interface in a joint prosthesis is a main cause of implant loosening. The introduction of a bioactive substance, hydroxyapatite (HA), to a metallic bone-implant may enhance its fixation on human bone by encouraging direct bone bonding. Ti6Al4V/TiC/HA composites with a reproducible porous structure (porosity of 27% and pore size of 6-89 μm) were successfully fabricated by a rapid microwave sintering technique. This method allows the biocomposites to be fabricated in a short period of time under ambient conditions. Ti6Al4V/TiC/HA composites exhibited a compressive strength of 93 MPa, compressive modulus of 2.9 GPa and microhardness of 556 HV which are close to those of the human cortical bone. The in vitro preosteoblast MC3T3-E1 cells cultured on the Ti6Al4V/TiC/HA composite showed that the composite surface could provide a biocompatible environment for cell adhesion, proliferation and differentiation without any cytotoxic effects. This is among the first attempts to study the in vivo performance of load-bearing Ti6Al4V/TiC and Ti6Al4V/TiC/HA composites in a live rabbit. The results indicated that the Ti6Al4V/TiC/HA composite had a better bone-implant interface compared with the Ti6Al4V/TiC implant. Based on the microstructural features, the mechanical properties, and the in vitro and in vivo test results from this study, the Ti6Al4V/TiC/HA composites have the potential to be employed in load-bearing orthopedic applications.

Composite chitosan/silk fibroin nanofibers for modulation of osteogenic differentiation and proliferation of human mesenchymal stem cells

Nanofibrous membrane scaffolds of chitosan (CS), silk fibroin (SF) and CS/SF blend were prepared by electrospinning and studied for growth and osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSCs). The morphology and physico-chemical properties of all membrane scaffolds were compared. The influence of CS and SF on cell proliferation was assessed by the MTS assay, whereas osteogenic differentiation was determined from the Alizarin Red staining, alkaline phosphatase activity and expression of osteogenic marker genes. The osteogenic differentiation and proliferation of hMSCs were enhanced by CS and SF nanofibers, respectively. Blending CS with SF retained the osteogenesis nature of CS without negatively influencing the cell proliferative effect of SF. By taking advantage of the differentiation/proliferation cues from individual components, the electrospun CS/SF composite nanofibrous membrane scaffold is suitable for bone tissue engineering.

Comparative characteristics of porous bioceramics for an osteogenic response in vitro and in vivo

Porous calcium phosphate ceramics are used in orthopedic and craniofacial applications to treat bone loss, or in dental applications to replace missing teeth. The implantation of these materials, however, does not induce stem cell differentiation, so suitable additional materials such as porous calcium phosphate discs are needed to influence physicochemical responses or structural changes. Rabbit adipose-derived stem cells (ADSC) and mouse osteoblastic cells (MC3T3-E1) were evaluated in vitro by the MTT assay, semi-quantitative RT-PCR, and immunoblotting using cells cultured in medium supplemented with extracts from bioceramics, including calcium metaphosphate (CMP), hydroxyapatite (HA) and collagen-grafted HA (HA-col). In vivo evaluation of the bone forming capacity of these bioceramics in rat models using femur defects and intramuscular implants for 12 weeks was performed. Histological analysis showed that newly formed stromal-rich tissues were observed in all the implanted regions and that the implants showed positive immunoreaction against type I collagen and alkaline phosphatase (ALP). The intramuscular implant region, in particular, showed strong positive immunoreactivity for both type I collagen and ALP, which was further confirmed by mRNA expression and immunoblotting results, indicating that each bioceramic material enhanced osteogenesis stimulation. These results support our hypothesis that smart bioceramics can induce osteoconduction and osteoinduction in vivo, although mature bone formation, including lacunae, osteocytes, and mineralization, was not prominent until 12 weeks after implantation.

Calcium phosphate ceramics in bone tissue engineering: a review of properties and their influence on cell behavior

Calcium phosphate ceramics (CPCs) have been widely used as biomaterials for the regeneration of bone tissue because of their ability to induce osteoblastic differentiation in progenitor cells. Despite the progress made towards fabricating CPCs possessing a range of surface features and chemistries, the influence of material properties in orchestrating cellular events such as adhesion and differentiation is still poorly understood. Specifically, questions such as why certain CPCs may be more osteoinductive than others, and how material properties contribute to osteoinductivity/osteoconductivity remain unanswered. Therefore, this review article systematically discusses the effects of the physical (e.g. surface roughness) and chemical properties (e.g. solubility) of CPCs on protein adsorption, cell adhesion and osteoblastic differentiation in vitro. The review also provides a summary of possible signaling pathways involved in osteoblastic differentiation in the presence of CPCs. In summary, these insights on the contribution of material properties towards osteoinductivity and the role of signaling molecules involved in osteoblastic differentiation can potentially aid the design of CPC-based biomaterials that support bone regeneration without the need for additional biochemical supplements.

Bone repair by periodontal ligament stem cellseeded nanohydroxyapatite-chitosan scaffold

Background

A nanohydroxyapatite-coated chitosan scaffold has been developed in recent years, but the effect of this composite scaffold on the viability and differentiation of periodontal ligament stem cells (PDLSCs) and bone repair is still unknown. This study explored the behavior of PDLSCs on a new nanohydroxyapatite-coated genipin-chitosan conjunction scaffold (HGCCS) in vitro as compared with an uncoated genipin-chitosan framework, and evaluated the effect of PDLSC-seeded HGCCS on bone repair in vivo.

Methods

Human PDLSCs were cultured and identified, seeded on a HGCCS and on a genipin-chitosan framework, and assessed by scanning electron microscopy, confocal laser scanning microscopy, MTT, alkaline phosphatase activity, and quantitative real-time polymerase chain reaction at different time intervals. Moreover, PDLSC-seeded scaffolds were used in a rat calvarial defect model, and new bone formation was assessed by hematoxylin and eosin staining at 12 weeks postoperatively.

Results

PDLSCs were clonogenic and positive for STRO-1. They had the capacity to undergo osteogenic and adipogenic differentiation in vitro. When seeded on HGCCS, PDLSCs exhibited significantly greater viability, alkaline phosphatase activity, and upregulated the bone-related markers, bone sialoprotein, osteopontin, and osteocalcin to a greater extent compared with PDLSCs seeded on the genipin-chitosan framework. The use of PDLSC-seeded HGCCS promoted calvarial bone repair.

Conclusion

This study demonstrates the potential of HGCCS combined with PDLSCs as a promising tool for bone regeneration.

Endodontic release system for apexification with calcium hydroxide microspheres

The use of calcium hydroxide (CH) as an intracanal medicament for apexification is widespread. However, because of a short residence time in the root canal, the CH must be refreshed frequently, increasing the number of appointments required and leading to patient non-compliance. We hypothesized that a core-/shell-structured CH microsphere system would lead to sustained slow release of calcium and hydroxide ions of CH for long periods of time, eliminating the need for multiple visits for apexification. In this study, calcium hydroxide microspheres (CHMSs) with a core/shell structure were prepared by an emulsion method. The CHMS shell was composed of alginate, which was crosslinked by the Ca(2+) released from the CH in the CHMSs. Therefore, this system provides a unique feedback loop that controls the release of ions from the CHMSs. The in vitro experiments from the root canals of extracted human teeth showed that the CHMSs had a sustained, slow release of Ca(2+), at a constant rate of approximately 2 to 3% per month from day one to the six-month endpoint of the experiment. After 6 months, 72.1 ± 5.8% of the total CH from the CHMSs remained in the root canals of the teeth, while only 46.9 ± 10.9% and 36.8 ± 7.5% remained from a commercial product (UltraCal(®)XS) and CH powder alone, respectively (p < 0.01). The pH of all of the formulations (CHMS, UltraCal(®) XS, and CH powder) in the extracted teeth never rose above 9 during the release period, indicating a buffering effect of the teeth. The core-/shell-structured CHMSs are, therefore, a promising delivery vehicle for the sustained slow release of Ca(2+) and OH(-) in the root canal.

Gene expression in osteoblast cells treated with submicron to nanometer hydroxyapatite-mullite eluate particles

The present research focused on determining the effect of hydroxyapatite-20 wt% mullite (H20M) particle eluates on apoptosis and differentiation of human fetal osteoblast (hFOB) cells. The H20M particles (257 ± 37 nm) were prepared, starting with the production of a nanocomposite using a unique route of spark plasma sintering, followed by a repeated grinding-cryo treatment and elution process. Tetrazolium based cytotoxicity assay results showed a time- and dose-dependent effect of H20M particle eluates on hFOB cytotoxicity. In particular, the results revealed statistically reduced cell viability after hFOB were exposed to the above 10% H20M (257 ± 37 nm) eluates for 48 h. The apoptotic cell death triggered by H20M treatment was proven by the analysis of molecular markers of apoptosis, that is, the Bcl-2 family of genes. hFOB expression of Bcl-xL and Bcl-xS significantly increased 25.6- and 25.2-fold for 50% of H20M concentrations, respectively. The ratio of Bcl-xL/Bax (4.01) decreased 2-fold for hFOB exposed to 100% of H20M eluates than that for 10% H20M eluate (7.94) treated hFOB cells. On the other hand, the Bcl-xS/Bax ratio for the 10% H20M eluate was 4.15-fold, whereas for 100% H20M eluates, it was 11.55-fold. Specifically, the anti-apoptotic effect of the H20M particle eluates was corroborated by the up-regulation of bone cell differentiation marker genes such as, collagen type I, cbfa, and osteocalcin. In summary, the present work clearly demonstrated that H20M submicron to nanometer composite particle eluates have a minimal effect on hFOB apoptosis and can even up-regulate the expression of bone cell markers at the molecular level.

Biomimetic surface modification of titanium surfaces for early cell capture by advanced electrospinning

The time required for osseointegration with a metal implant having a smooth surface ranges from three to six months. We hypothesized that biomimetic coating surfaces with poly(lactic-co-glycolic acid) (PLGA)/collagen fibers and nano-hydroxyapatite (n-HA) on the implant would enhance the adhesion of mesenchymal stem cells. Therefore, this surface modification of dental and bone implants might enhance the process of osseointegration. In this study, we coated PLGA or PLGA/collagen (50:50 w/w ratio) fiber on Ti disks by modified electrospinning for 5 s to 2 min; after that, we further deposited n-HA on the fibers. PLGA fibers of fiber diameter 0.957 ± 0.357 µm had a contact angle of 9.9 ± 0.3° and PLGA/collagen fibers of fiber diameter 0.378 ± 0.068 µm had a contact angle of 0°. Upon n-HA incorporation, all the fibers had a contact angle of 0° owing to the hydrophilic nature of n-HA biomolecule. The cell attachment efficiency was tested on all the scaffolds for different intervals of time (10, 20, 30 and 60 min). The alkaline phosphatase activity, cell proliferation and mineralization were analyzed on all the implant surfaces on days 7, 14 and 21. Results of the cell adhesion study indicated that the cell adhesion was maximum on the implant surface coated with PLGA/collagen fibers deposited with n-HA compared to the other scaffolds. Within a short span of 60 min, 75% of the cells adhered onto the mineralized PLGA/collagen fibers. Similarly by day 21, the rate of cell proliferation was significantly higher (p ⩽ 0.05) on the mineralized PLGA/collagen fibers owing to enhanced cell adhesion on these fibers. This enhanced initial cell adhesion favored higher cell proliferation, differentiation and mineralization on the implant surface coated with mineralized PLGA/collagen fibers.

Fabrication and biocompatibility of electrospun silk biocomposites

Silk fibroin has attracted great interest in tissue engineering because of its outstanding biocompatibility, biodegradability and minimal inflammatory reaction. In this study, two kinds of biocomposites based on regenerated silk fibroin are fabricated by electrospinning and post-treatment processes, respectively. Firstly, regenerated silk fibroin/tetramethoxysilane (TMOS) hybrid nanofibers with high hydrophilicity are prepared, which is superior for fibroblast attachment. The electrospinning process causes adjacent fibers to 'weld' at contact points, which can be proved by scanning electron microscope (SEM). The water contact angle of silk/tetramethoxysilane (TMOS) composites shows a sharper decrease than pure regenerated silk fibroin nanofiber, which has a great effect on the early stage of cell attachment behavior. Secondly, a novel tissue engineering scaffold material based on electrospun silk fibroin/nano-hydroxyapatite (nHA) biocomposites is prepared by means of an effective calcium and phosphate (Ca-P) alternate soaking method. nHA is successfully produced on regenerated silk fibroin nanofiber within several min without any pre-treatments. The osteoblastic activities of this novel nanofibrous biocomposites are also investigated by employing osteoblastic-like MC3T3-E1 cell line. The cell functionality such as alkaline phosphatase (ALP) activity is ameliorated on mineralized silk nanofibers. All these results indicate that this silk/nHA biocomposite scaffold material may be a promising biomaterial for bone tissue engineering.

Hydroxyapatite-coated carboxymethyl chitosan scaffolds for promoting osteoblast and stem cell differentiation

The behavior of MC3T3 osteoblasts and human bone marrow stem cells on non-coated and hydroxyapatite (HAP)-coated carboxymethyl chitosan (CMCS) scaffolds was investigated in this study. Four HAP-coated scaffolds with different coating morphology and coverage were prepared by mineralization for 1week in four different mineralizing solutions. Viability, attachment, proliferation, and differentiation of the osteoblasts on these scaffolds were evaluated, and an osteogenic gene expression analysis was carried out to investigate the osteoblastic differentiation of the stem cells. No cytotoxic effects were observed with both the non-coated and coated scaffolds. The non-coated CMCS scaffold supports attachment, proliferation, and differentiation of the osteoblasts and directs stem cell differentiation to osteoblast. Coating the scaffold with HAP substantially enhances these effects on the osteoblasts and stem cells. The main improvement was in the late stage of osteoblast differentiation since osteoblastic differentiation of the osteoblasts and stem cells in this stage was significantly enhanced by the coatings regardless of the variation in morphology and coverage. On the other hand, high HAP coverage was beneficial in stimulating osteoblast attachment and proliferation. This study demonstrates the good potential of HAP-coated CMCS scaffolds as osteogenic scaffolds to stimulate bone healing.

Novel hybrid scaffolds for the cultivation of osteoblast cells

In this study, natural biodegradable polysaccharide, chitosan, and synthetic biodegradable polymer, poly(ɛ-caprolactone) (PCL) were used to prepare 3D, hybrid polymeric tissue scaffolds (PCL/chitosan blend and PCL/chitosan/PCL layer by layer scaffolds) by using the electrospinning technique. The hybrid scaffolds were developed through HA addition to accelerate osteoblast cell growth. Characteristic examinations of the scaffolds were performed by micrometer, SEM, contact angle measurement system, ATR-FTIR, tensile machine and swelling experiments. The thickness of all electrospun scaffolds was determined in the range of 0.010±0.001-0.012±0.002 mm. In order to optimize electrospinning processes, suitable bead-free and uniform scaffolds were selected by using SEM images. Blending of PCL with chitosan resulted in better hydrophilicity for the PCL/chitosan scaffolds. The characteristic peaks of PCL and chitosan in the blend and layer by layer nanofibers were observed. The PCL/chitosan/PCL layer by layer structure had higher elastic modulus and tensile strength values than both individual PCL and chitosan structures. The layer by layer scaffolds exhibited the PBS absorption values of 184.2; 197.2% which were higher than those of PCL scaffolds but lower than those of PCL/chitosan blend scaffolds. SaOs-2 osteosarcoma cell culture studies showed that the highest ALP activities belonged to novel PCL/chitosan/PCL layer by layer scaffolds meaning better cell differentiation on the surfaces.

In vitro biocompatibility of novel biphasic calcium phosphate-mullite composites

In designing new calcium phosphate (CaP)-based composites, the improvement in physical properties (strength, toughness) without compromising the biocompatibility aspect is essential. In a recent study, it has been demonstrated that significant improvement in compressive strength as well as modest enhancement in toughness is achievable in biphasic calcium phosphate (BCP)-based composites with mullite addition (up to 30 wt%). Herein, we report the results of the in vitro cell adhesion, cell proliferation, alkaline phosphatase (ALP) activity, and osteocalcin (OC) production for a series of BCP-mullite (up to 30 wt%) composites. Mouse fibroblast (L929) cell lines were used to examine in vitro cell adhesion and cell proliferation; while osteoblast-like (osteosarcoma, MG63) cells were used for in vitro osteoblastic function study by ALP and OC expression. Much emphasis has been provided to discuss the cell viability and proliferation as well as osteoblastic differentiation marker on the investigated biocomposites in relation to the characteristics of the phase assemblage. On the basis of various observations using multiple biochemical assays, it has been suggested that BCP-mullite composites would be a candidate material for orthopedic applications.

Fabrication and characterization of poly(lactic-co-glycolic acid) microsphere/amorphous calcium phosphate scaffolds

Although hydroxyapatite (HAP) and β-tricalcium phosphate have been used extensively as osteoconductive minerals in biomaterial scaffolds for bone regeneration, they lack the capacity to stimulate osteoblastic differentiation of progenitor cells. In contrast, amorphous calcium phosphates (ACPs), which convert to HAP under aqueous conditions, have the potential to facilitate osteoblastic differentiation through the transient local release of calcium and phosphate ions. Therefore, in this study ACPs were synthesized using zinc and zirconia divalent cations as stabilizers (denoted ZnACP and ZrACP, respectively) and compared to HAP. Analysis of ion release into serum-containing cell culture medium revealed transiently elevated levels of calcium and phosphorous, consistent with the enhanced solubility of ZrACP and ZnACP relative to HAP. In addition, X-ray diffraction analysis revealed partial conversion of ZrACP to HAP but no conversion of ZnACP after 96 h. Next, scaffolds were fabricated by sintering mixtures of 300-500 µm poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres and 0.5 wt% calcium phosphate mineral (HAP, ZrACP or ZnACP) at 70 °C for 24 h. Scanning electron microscopy revealed a porous microsphere matrix with calcium phosphate particulates clinging to the microsphere surfaces both prior to and after 14 days in culture medium. Finally, the incorporation of calcium phosphate resulted in a lower compressive modulus in the range 127 to 74-89 MPa. Taken together, these results indicate that ZrACP, ZnACP and HAP minerals exhibit very different properties, and therefore may elicit different osteoblastic responses in vitro.

A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics

Several inorganic materials such as special compositions of silicate glasses, glass-ceramics and calcium phosphates have been shown to be bioactive and resorbable and to exhibit appropriate mechanical properties which make them suitable for bone tissue engineering applications. However, the exact mechanism of interaction between the ionic dissolution products of such inorganic materials and human cells are not fully understood, which has prompted considerable research work in the biomaterials community during the last decade. This review comprehensively covers literature reports which have investigated specifically the effect of dissolution products of silicate bioactive glasses and glass-ceramics in relation to osteogenesis and angiogenesis. Particularly, recent advances made in fabricating dense biomaterials and scaffolds doped with trace elements (e.g. Zn, Sr, Mg, and Cu) and investigations on the effect of these elements on the scaffold biological performance are summarized and discussed in detail. Clearly, the biological response to artificial materials depends on many parameters such as chemical composition, topography, porosity and grain size. This review, however, focuses only on the ion release kinetics of the materials and the specific effect of the released ionic dissolution products on human cell behaviour, providing also a scope for future investigations and identifying specific research needs to advance the field. The biological performance of pure and doped silicate glasses, phosphate based glasses with novel specific compositions as well as several other silicate based compounds are discussed in detail. Cells investigated in the reviewed articles include human osteoblastic and osteoclastic cells as well as endothelial cells and stem cells.

The effects of inorganic additives to calcium phosphate on in vitro behavior of osteoblasts and osteoclasts

This study describes a medium-throughput system based on deposition of calcium phosphate films in multi-well tissue culture plates that can be used to study the effect of inorganic additives on the behavior of osteoblasts and osteoclasts in a standardized manner. All tested elements, copper, zinc, strontium, fluoride and carbonate were homogenously deposited into calcium phosphate films in varying concentrations by using a biomimetic approach. The additives affected morphology and composition of calcium phosphate films to different extent, depending on the concentration used. The effect on proliferation and differentiation of MC3T3-E1 osteoblasts depended on the compound and concentration tested. In general, copper and zinc ions showed an inhibitory effect on osteoblast proliferation, the effect of strontium was concentration dependent, whereas films containing fluoride and carbonate, respectively, augmented osteoblast proliferation. Copper and zinc had no effect or were mild inhibitory on osteoblast differentiation, while strontium, fluoride and carbonate ions demonstrated a clear decrease in differentiation in comparison to the control films without additives. Primary osteoclasts cultured on calcium phosphate films containing additives showed a significantly decreased resorptive activity as compared to the control, independent on the element incorporated. No cytotoxic effect of the elements in the concentrations tested was observed. The system presented in this study mimics bone mineral containing trace elements, making it useful for studying fundamental processes of bone formation and turnover. The present results can be used for modifying bone graft substitutes by addition of inorganic additives in order to affect their performance in bone repair and regeneration.