The optimal SAM surface functional group for producing a biomimetic HA coating on Ti

Effectiveness of Biofunctionalization of Titanium Surfaces with Phosphonic Acid

Surface functionalization of dental implant surfaces has been a developing field in biomaterial research. This study aimed to obtain self-assembled monolayers (SAMs) using carboxyethylphosphonic acid on the surface of titanium (Ti) screws, and assessed the surface characteristics, biomechanical, and cellular behavior on the obtained specimens. This study had three groups, i.e., a control (untreated screws), a test group treated with phosphonic acid, and a third group with treated acid and bone morphogenetic protein (BMP-2) for in vitro analysis of cell lines. The assessed parameters included surface wettability, surface characteristics using scanning electron microscopy (SEM), protein immobilization, and cellular behavior of fibroblasts and mesenchymal stem cells of adipose tissue (MSCat cells). For surface wettability, a Welch test was performed to compare the contact angles between control (67 ± 1.83) and test (18.84 ± 0.72) groups, and a difference was observed in the mean measurements, but was not statistically significant. The SEM analysis showed significant surface roughness on the test screws and the cellular behavior of fibroblasts, and MSCat cells were significantly improved in this group, with fibroblasts having a polygonal shape with numerous vesicles and MSCat cells stable and uniformly coating the test Ti surface. Surface biofunctionalization of Ti surfaces with phosphonic acid showed promising results in this study, but remains to be clinically validated for its applications.

Zn-Containing Membranes for Guided Bone Regeneration in Dentistry

Barrier membranes are employed in guided bone regeneration (GBR) to facilitate bone in-growth. A bioactive and biomimetic Zn-doped membrane with the ability to participate in bone healing and regeneration is necessary. The aim of the present study is to state the effect of doping the membranes for GBR with zinc compounds in the improvement of bone regeneration. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken, focusing on the antibacterial effects, physicochemical and biological properties of Zn-loaded membranes. Bioactivity, bone formation and cytotoxicity were analyzed. Microstructure and mechanical properties of these membranes were also determined. Zn-doped membranes have inhibited in vivo and in vitro bacterial colonization. Zn-alloy and Zn-doped membranes attained good biocompatibility and were found to be non-toxic to cells. The Zn-doped matrices showed feasible mechanical properties, such as flexibility, strength, complex modulus and tan delta. Zn incorporation in polymeric membranes provided the highest regenerative efficiency for bone healing in experimental animals, potentiating osteogenesis, angiogenesis, biological activity and a balanced remodeling. Zn-loaded membranes doped with SiO₂ nanoparticles have performed as bioactive modulators provoking an M2 macrophage increase and are a potential biomaterial for promoting bone repair. Zn-doped membranes have promoted pro-healing phenotypes.

Protein adsorption and bioactivity of functionalized electrospun membranes for bone regeneration

OBJECTIVES

To evaluate the adsorption of bone related proteins and bioactivity of experimental functionalized (carboxylated or aminated) polymeric membranes for bone regeneration.

METHODS

Polymethylmethacrylate-based membranes functionalized with carboxyl or amino radicals were tested. Membranes were zinc loaded and the adsorption isotherms of zinc were studied. Human plasma proteins, bovine serum albumin, fibrinogen and fibronectin adsorption were measured with a spectrophotometer applying an acid determination protocol. Biomimetic calcium phosphate precipitation on polymeric membranes was also assessed after simulated body fluid immersion. Scanning electron microscopy and elemental analysis by means of an energy dispersive system were used for mineral deposits identification. A commercially available polytetrafluoroethylene membrane was used as control.

RESULTS

Both experimental membranes produced higher protein adsorption than the commercial control that does not adsorb proteins. Carboxylated membranes adsorbed significantly more albumin than the aminated ones, the opposite occurred with fibrinogen. With plasma and fibronectin proteins both type of membranes performed similarly. Only carboxylated membranes were bioactive and precipitated calcium and phosphate on their surfaces.

CONCLUSIONS

The polymethylmethacrylate zinc-loaded membranes functionalized with carboxyl groups performed as high adsorbable membranes for bone regeneration related proteins. They also served as templates for mineralization of hydroxyapatite.

CLINICAL SIGNIFICANCE

Protein adsorption is the initial reaction after the implantation of a biomaterial into the body and will influence subsequent cell function. The adsorption of bone related proteins together with the observed biomimetic calcium deposition on the experimental carboxylated membranes could be associated with their ability to promote bone regeneration.

Surface Functionalization of Ti6Al4V via Self-assembled Monolayers for Improved Protein Adsorption and Fibroblast Adhesion

Although metallic biomaterials find numerous biomedical applications, their inherent low bioactivity and poor osteointegration had been a great challenge for decades. Surface modification via silanization can serve as an attractive method for improving the aforementioned properties of such substrates. However, its effect on protein adsorption/conformation and subsequent cell adhesion and spreading has rarely been investigated. This work reports the in-depth study of the effect of Ti6Al4V surface functionalization on protein adsorption and cell behavior. We prepared self-assembled monolayers (SAMs) of five different surfaces (amine, octyl, mixed [1:1 ratio of amine:octyl], hybrid, and COOH). Synthesized surfaces were characterized by Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy, contact angle goniometry, profilometry, and field emission scanning electron microscopy (FESEM). Quantification of adsorbed mass of bovine serum albumin (BSA) and fibronectin (FN) was determined on different surfaces along with secondary structure analysis. The adsorbed amount of BSA was found to increase with an increase in surface hydrophobicity with the maximum adsorption on the octyl surface while the reverse trend was detected for FN adsorption, having the maximum adsorbed mass on the COOH surface. The α-helix content of adsorbed BSA increased on amine and COOH surfaces while it decreased for other surfaces. Whereas increasing β-turn content of the adsorbed FN with the increase in the surface hydrophobicity was observed. In FN, RGD loops are located in the β-turn and consequently the increase in Δ adhered cells (%) was predominantly increased with the increasing Δ β-turn content (%). We found hybrid surfaces to be the most promising surface modifier due to maximum cell adhesion (%) and proliferation, larger nuclei area, and the least cell circularity. Bacterial density increased with the increasing hydrophobicity and was found maximum for the amine surface (θ = 63 ± 1°) which further decreased with the increasing hydrophobicity. Overall, modified surfaces (in particular hybrid surface) showed better protein adsorption and cell adhesion properties as compared to unmodified Ti6Al4V and can be potentially used for tissue engineering applications.

Self-Assembled Monolayers for Dental Implants

Implant-based therapy is a mature approach to recover the health conditions of patients affected by edentulism. Thousands of dental implants are placed each year since their introduction in the 80s. However, implantology faces challenges that require more research strategies such as new support therapies for a world population with a continuous increase of life expectancy, to control periodontal status and new bioactive surfaces for implants. The present review is focused on self-assembled monolayers (SAMs) for dental implant materials as a nanoscale-processing approach to modify titanium surfaces. SAMs represent an easy, accurate, and precise approach to modify surface properties. These are stable, well-defined, and well-organized organic structures that allow to control the chemical properties of the interface at the molecular scale. The ability to control the composition and properties of SAMs precisely through synthesis (i.e., the synthetic chemistry of organic compounds with a wide range of functional groups is well established and in general very simple, being commercially available), combined with the simple methods to pattern their functional groups on complex geometry appliances, makes them a good system for fundamental studies regarding the interaction between surfaces, proteins, and cells, as well as to engineering surfaces in order to develop new biomaterials.

Control of hydroxyapatite coating by self-assembled monolayers on titanium and improvement of osteoblast adhesion

Self-assembly technique was applied to introduce functional groups and form hydroxyl-, amine-, and carboxyl-terminal self-assembled monolayers (SAMs). The SAMs were grafted onto titanium substrates to obtain a molecularly smooth functional surface. Subsequent hydrothermal crystal growth formed homogeneous and crack-free crystalline hydroxyapatite (HA) coatings on these substrates. AFM and XPS were used to characterize the SAM surfaces, and XRD, SEM, and TEM were used to characterize the HA coatings. Results show that highly crystalline, dense, and oriented HA coatings can be formed on the OH-, NH₂ -, and COOH-SAM surfaces. The SAM surface with -COOH exhibited stronger nucleating ability than that with -OH and -NH₂ . The nucleation and growth processes of HA coatings were effectively controlled by varying reaction time, pH, and temperature. By using this method, highly crystalline, dense, and adherent HA coatings were obtained. In addition, in vitro cell evaluation demonstrated that HA coatings improved cell adhesion as compared with pristine titanium substrate. The proposed method is considerably effective in introducing the HA coatings on titanium surfaces for various biomedical applications and further usage in other industries. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 124-135, 2017.

Improving the osteointegration of Ti6Al4V by zeolite MFI coating

Osteointegration is crucial for success in orthopedic implantation. In recent decades, there have been numerous studies aiming to modify titanium alloys, which are the most widely used materials in orthopedics. Zeolites are solid aluminosilicates whose application in the biomedical field has recently been explored. To this end, MFI zeolites have been developed as titanium alloy coatings and tested in vitro. Nevertheless, the effect of the MFI coating of biomaterials in vivo has not yet been addressed. The aim of the present work is to evaluate the effects of MFI-coated Ti6Al4V implants in vitro and in vivo. After surface modification, the surface was investigated using field emission scanning electron microscopy (FE-SEM) and energy dispersive spectroscopy (EDS). No difference was observed regarding the proliferation of MC3T3-E1 cells on the Ti6Al4V (Ti) and MFI-coated Ti6Al4V (M-Ti) (p > 0.05). However, the attachment of MC3T3-E1 cells was found to be better in the M-Ti group. Additionally, ALP staining and activity assays and quantitative real-time RT-PCR indicated that MC3T3-E1 cells grown on the M-Ti displayed high levels of osteogenic differentiation markers. Moreover, Van-Gieson staining of histological sections demonstrated that the MFI coating on Ti6Al4V scaffolds significantly enhanced osteointegration and promoted bone regeneration after implantation in rabbit femoral condylar defects at 4 and 12 weeks. Therefore, this study provides a method for modifying Ti6Al4V to achieve improved osteointegration and osteogenesis.

Engineering interaction between bone marrow derived endothelial cells and electrospun surfaces for artificial vascular graft applications

The aim of this investigation was to understand and engineer the interactions between endothelial cells and the electrospun (ES) polyvinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) nanofiber surfaces and evaluate their potential for endothelialization. Elastomeric PVDF-HFP samples were electrospun to evaluate their potential use as small diameter artificial vascular graft scaffold (SDAVG) and compared with solvent cast (SC) PVDF-HFP films. We examined the consequences of fibrinogen adsorption onto the ES and SC samples for endothelialisation. Bone marrow derived endothelial cells (BMEC) of human origin were incubated with the test and control samples and their attachment, proliferation, and viability were examined. The nature of interaction of fibrinogen with SC and ES samples was investigated in detail using ELISA, XPS, and FTIR techniques. The pristine SC and ES PVDF-HFP samples displayed hydrophobic and ultrahydrophobic behavior and accordingly, exhibited minimal BMEC growth. Fibrinogen adsorbed SC samples did not significantly enhance endothelial cell binding or proliferation. In contrast, the fibrinogen adsorbed electrospun surfaces showed a clear ability to modulate endothelial cell behavior. This system also represents an ideal model system that enables us to understand the natural interaction between cells and their extracellular environment. The research reported shows potential of ES surfaces for artificial vascular graft applications.

Biocompatible and freestanding anatase TiO2 nanomembrane with enhanced photocatalytic performance

Biocompatible and freestanding TiO2 nanotube membranes with improved photocatalytic activity were fabricated through a water-vapour-assisted annealing treatment at relatively low temperatures. Photoluminescence results and structure characterization prove that the obtained TiO2 nanotube membranes not only possess an enhanced anatase crystallinity from water molecule-intermediated dissolution-precipitation reactions, but are also covered with abundant hydroxyl groups which are hardly influenced by external disturbances. The anatase crystallinity, the superficial hydroxyl groups and the nanotubular morphology of the membrane treated with water vapour thus lead to enhancement in photocatalytic activity. This new approach is simple and time-saving, opening up new opportunities in various areas, including tissue-engineering, watersplitting, dye-sensitized solar cells and photocatalysis.

The effect of polyelectrolyte multilayer coated titanium alloy surfaces on implant anchorage in rats

Advances have been achieved in the design and biomechanical performance of orthopedic implants in the last decades. These include anatomically shaped and angle-stable implants for fracture fixation or improved biomaterials (e.g. ultra-high-molecular-weight polyethylene) in total joint arthroplasty. Future modifications need to address the biological function of implant surfaces. Functionalized surfaces can promote or reduce osseointegration, avoid implant-related infections or reduce osteoporotic bone loss. To this end, polyelectrolyte multilayer structures have been developed as functional coatings and intensively tested in vitro previously. Nevertheless, only a few studies address the effect of polyelectrolyte multilayer coatings of biomaterials in vivo. The aim of the present work is to evaluate the effect of polyelectrolyte coatings of titanium alloy implants on implant anchorage in an animal model. We test the hypotheses that (1) polyelectrolyte multilayers have an effect on osseointegration in vivo; (2) multilayers of chitosan/hyaluronic acid decrease osteoblast proliferation compared to native titanium alloy, and hence reduce osseointegration; (3) multilayers of chitosan/gelatine increase osteoblast proliferation compared to native titanium alloy, hence enhance osseointegration. Polyelectrolyte multilayers on titanium alloy implants were fabricated by a layer-by-layer self-assembly process. Titanium alloy (Ti) implants were alternately dipped into gelatine (Gel), hyaluronic acid (HA) and chitosan (Chi) solutions, thus assembling a Chi/Gel and a Chi/HA coating with a terminating layer of Gel or HA, respectively. A rat tibial model with bilateral placement of titanium alloy implants was employed to analyze the bones' response to polyelectrolyte surfaces in vivo. 48 rats were randomly assigned to three groups of implants: (1) native titanium alloy (control), (2) Chi/Gel and (3) Chi/HA coating. Mechanical fixation, peri-implant bone area and bone contact were evaluated by pull-out tests and histology at 3 and 8 weeks. Shear strength at 8 weeks was statistically significantly increased (p<0.05) in both Chi/Gel and Chi/HA groups compared to the titanium alloy control. No statistically significant difference (p>0.05) in bone contact or bone area was found between all groups. No decrease of osseointegration of Chi/HA-coated implants compared to non-coated implants was found. The results of polyelectrolyte coatings in a rat model showed that the Chi/Gel and Chi/HA coatings have a positive effect on mechanical implant anchorage in normal bone.

Calcium phosphate growth at electropolished titanium surfaces

This work investigated the ability of electropolished Ti surface to induce Hydroxyapatite (HA) nucleation and growth in vitro via a biomimetic method in Simulated Body Fluid (SBF). The HA induction ability of Ti surface upon electropolishing was compared to that of Ti substrates modified with common chemical methods including alkali, acidic and hydrogen peroxide treatments. Our results revealed the excellent ability of electropolished Ti surfaces in inducing the formation of bone-like HA at the Ti/SBF interface. The chemical composition, crystallinity and thickness of the HA coating obtained on the electropolished Ti surface was found to be comparable to that achieved on the surface of alkali treated Ti substrate, one of the most effective and popular chemical treatments. The surface characteristics of electropolished Ti contributing to HA growth were discussed thoroughly.

Effect of surface chemistry on gene transfer efficiency mediated by surface-induced DNA-doped nanocomposites

Surface-induced biomineralization represents an effective way of immobilizing DNA molecules on biomaterial surfaces to introduce DNA into cells in contact with or at an approximate distance from the biomaterial surfaces. Previous studies have investigated how the composition of mineralizing solutions affects the composition and pH responsiveness of nanocomposites and thus gene transfer efficiency in different cell types. This study investigates how the functional groups of a biomaterial surface affect the induction and crystallographic properties of nanocomposites and thus the gene transfer efficiency. Self-assembled monolayers with different termini were used to control the functional groups of a surface. It is demonstrated that the induction of DNA-doped nanocomposites depends on the surface functional groups, which is consistent with previous studies. The crystallographic properties did not vary significantly with the functional groups. DNA-doped nanocomposites induced by different surface functional groups resulted in different cellular uptake of DNA and thus gene transfer efficiency. The differential cellular uptake may be attributed to the interactions between nanocomposites and functional groups. The weaker inducer resulted in higher cellular uptake, and thus higher gene transfer efficiency. Together with other previous studies, the current results suggest that surface-mediated gene transfer by DNA-doped nanocomposites can be modulated through both mineralizing solutions and surface chemistries.

Characterization of self-organized TiO2 nanotubes on Ti-4Zr-22Nb-2Sn alloys and the application in drug delivery system

In this study, the self-organized TiO(2) nanotubes grown by anodization of Ti-4Zr-22Nb-2Sn at different potentials, concentration of NH(4)F and anodization time was investigated. The morphology of nanotubes was observed by FE-SEM. The drug-loaded nanotubes were also fabricated in aqueous media containing minocycline hydrochloride. They were characterized by SEM, XPS and FT-IR. The results showed that the drug of minocycline hydrochloride (MH) was loaded in the nanotubes. The release effects were studied in phosphate buffer solution (PBS). The release rate of MH from TiO(2) nanotubes with shorter tube length in PBS was lower than the one of MH from longer nanotubes. The sustaining release time could last at least 150 h. Hence, it is a promising method to eliminate the harmful reactions by carrying drug in the tubes when the titanium alloys were used as biomedical implants.

Chemical analyses of hydroxyapatite formation on SAM surfaces modified with COOH, NH(2), CH(3), and OH functions

Hydroxyapatite formation was examined at the surface of self-assembled monolayers (SAMs) modified with four functional groups, -COOH, -NH(2), -CH(3), and -OH. For COOH-SAM and NH(2)-SAM, scanning electron spectroscopic observation showed that flake-like sheet crystals covered the whole wafer and small broccoli-like crystals were observed occasionally on the flake-like crystal base layer. For CH(3)-SAM and OH-SAM, no flake-like sheet crystals were observed; broccoli-like crystals were observed in a dispersed manner for CH(3)-SAM, but in localized spots for OH-SAM. X-ray diffraction patterns showed a strong apatite pattern oriented toward the c-axis direction for COOH-SAM. ESCA analysis revealed distinct Ca, P, O peaks for COOH-, NH(2)-, CH(3)-, and OH-SAM. Surface plasmon resonance (SPR) analysis indicated that during the supply of supersaturated calcium phosphate solution, the deposition of precipitates increased monotonically with time for COOH-SAM, increased slightly for NH(2)-SAM, but little increase in deposition was detected for CH(3)-SAM and OH-SAM.

Control of alpha-alumina surface charge with carboxylic acids

In this work, we studied the surface charge of alpha-alumina treated with carboxylic acids with different carbon chain length. The results show the possibility of controlling surface charges of alumina by using different concentrations of carboxylic acids or changing the size of the carbon chain of the acids. We also report that part of the acid found on the surface is strongly bound, therefore making it possible to obtain pH-resistant samples of alpha-alumina with an isoelectric point (IEP) of 5.5. It is found, that IEP values obtained for modified samples have a linear correlation with the number of carbon atoms of dicarboxylic acids for up to five carbon atoms. From a practical perspective, the method presented in this work has many advantages. First, it maintains the same hydrophilicity of the alumina surface. Second, the modification of the surface is stable in a long-range of pH. Finally, the presented method is easy-to-use and cheap, as the modification consists of only two simple steps carried out at low temperatures with inexpensive and nontoxic reagents.

Titanium Surface Modification Techniques for Implant Fabrication – From Microscale to the Nanoscale

This manuscript reviews about titanium surface modification techniques for its application in orthopaedic and dental implants. There are a few limitations in the long term prognosis of orthopaedic and dental implants. Poor osseointegration with bone, periimplant infection leading to implant failure and short term longevity demanding revision surgery, are to mention a few. Micro- and nanoscale modification of titanium surface using physicochemical, morphological and biochemical approaches have resulted in higher bone to implant contact ratio and improved osseointegration. With recent advances in micro, nano-fabrication techniques and multidisciplinary research studies focusing on bridging biomaterials for medical applications, TiO2 nanotubes have been extensively studied for implant applications. The need for titanium implant surface that can closely mimic the nanoscale architecture of human bone has become a priority. For such purpose, TiO2 nanotubes of different dimensions and architectural fashions at the nanoscale level are being evaluated. This manuscript discusses in brief about the in-vitro and in-vivo studies on titanium surface modification techniques. This manuscript also addresses the recent studies done on such nanotubular surfaces for the effective delivery of osteoinductive growth factors and anti bacterial/ anti inflammatory drugs to promote osseointegration and prevent peri-implant infection.

Effect of functional end groups of silane self-assembled monolayer surfaces on apatite formation, fibronectin adsorption and osteoblast cell function

Bioactive glass (BG) can directly bond to living bone without fibrous tissue encapsulation. Key mechanistic steps of BG's activity are attributed to calcium phosphate formation, surface hydroxylation and fibronectin (FN) adsorption. In the present study, self-assembled monolayers (SAMs) of alkanesilanes with different surface chemistry (OH, NH(2) and COOH) were used as a model system to mimic BG's surface activity. Calcium phosphate (Ca-P) was formed on SAMs by immersion in a solution that simulates the electrolyte content of physiological fluids. FN adsorption kinetics and monolayer coverage was determined on SAMs with or without Ca-P coating. The surface roughness was also examined on these substrates before and after FN adsorption. The effects of FN-adsorbed, Ca-P-coated SAMs on the function of MC3T3-E1 were evaluated by cell growth, expression of alkaline phosphatase activity and actin cytoskeleton formation. We demonstrate that, although the FN monolayer coverage and the root mean square (rms) roughness are similar on --OH and --COOH terminated SAMs with or without Ca-P coating, higher levels of ALP activity, more actin cytoskeleton formation and more cell growth are obtained on --OH- and --COOH-terminated SAMs with Ca-P coating. In addition, although the FN monolayer coverage is higher on Ca-P-coated --NH(2)-terminated SAMs and SiO(x) surfaces, higher levels of ALP activity and more cell growth are obtained on Ca-P-coated --OH- and --COOH-terminated SAMs. Thus, with the same Ca-P coatings, different surface functional groups have different effects on the function of osteoblastic cells. These findings represent new insights into the mechanism of bioactivity of BG and thereby may lead to designing superior constructs for bone grafting.

Antibacterial and osteogenic properties of silver-containing hydroxyapatite coatings produced using a sol gel process

Since bacterial infection is a rising complication following the wide use of implant, there is considerable attention on the effect of implant surface properties on bacterial adhesion. In this study, the effect of silver (Ag) doped hydroxyapatite (HA) coatings on initial antibacterial adhesion and osteoblast cell proliferation and differentiation was investigated. Using a sol-gel process, HA coatings doped with 1 wt % AgNO(3) (AgHA1.0) and 1.5 wt % Ag (AgHA1.5) were prepared. Coated surfaces were characterized using X-ray diffraction (XRD) and contact angles measurements. The initial bacteria adhesion was evaluated using a RP12 strain of Staphylococcus epidermidis (ATCC 35984) and the Cowan I strain of Staphylococcus aureus, whereas osteoblast proliferation and differentiation were evaluated using human embryonic palatal mesenchyme cells (HEPM), an osteoblast precursor cell line. In this study, XRD analysis of all surfaces indicated peaks corresponding to HA. Contact angles for AgHA surfaces were observed to be significantly lower when compared to HA surfaces. In vitro initial bacterial adhesion study indicated a significantly reduced number of S. epidermidis and S. aureus on AgHA surfaces when compared to HA surface. The use of HEPM cells indicated no significant difference in double-stranded DNA (dsDNA) production between all surfaces. Additionally, no differences in alkaline phosphatase specific activity were observed between HA and AgHA1.0 surfaces. Overall, it was concluded that AgHA1.0 has the similar biological activity as HA, with respect to bone cell proliferation and differentiation. In addition, the AgHA1.0 was also concluded to have the ability to minimize the initial bacteria adhesion. (c) 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2007.