Thermoresponsive degradable poly(ethylene glycol) analogues

Structure-properties relationships of defined CNF single-networks crosslinked by telechelic PEGs

The high structural anisotropy and colloidal stability of cellulose nanofibrils' enable the creation of self-standing fibrillar hydrogel networks at very low solid contents. Adding methacrylate moieties on the surface of TEMPO oxidized CNFs allows the formation of more robust covalently crosslinked networks by free radical polymerization of acrylic monomers, exploiting the mechanical properties of these networks more efficiently. This technique yields strong and elastic networks but with an undefined network structure. In this work, we use acrylate-capped telechelic polymers derived from the step-growth polymerization of PEG diacrylate and dithiothreitol to crosslink methacrylated TEMPO-oxidized cellulose nanofibrils (MATO CNF). This combination resulted in flexible and strong hydrogels, as observed through rheological studies, compression and tensile loading. The structure and mechanical properties of these hydrogel networks were found to depend on the dimensions of the CNFs and polymer crosslinkers. The structure of the networks and the role of individual components were evaluated with SAXS (Small-Angle X-ray Scattering) and photo-rheology. A thorough understanding of hybrid CNF/polymer networks and how to best exploit the capacity of these networks enable further advancement of cellulose-based materials for applications in packaging, soft robotics, and biomedical engineering.

Preparation of a mimetic and degradable poly(ethylene glycol) by a non-eutectic mixture of organocatalysts (NEMO) via a one-pot two-step process

A one-pot, two-step method for the preparation of degradable PEG is here presented. The full process addresses the requirements imposed by green chemistry and involves the use of a single and nontoxic non-eutectic mixture of organocatalysts. The strategy relies on the polycondensation of PEG800 after its functionalization by bio-derived 5-membered γ-butyrolactone.

A one-pot, two-step method for the preparation of degradable PEG is here presented.

Enzymatically cross-linked hydrogels based on a linear poly(ethylene glycol) analogue for controlled protein release and 3D cell culture

Injectable and enzyme-mediated cross-linked hydrogels are promising biomedical materials. However, although poly(ethylene glycol) (PEG) is a popular basic component of synthetic hydrogels, only a few PEG-based enzymatically cross-linked hydrogels have been developed based on branched PEG. Compared with branched PEG, linear PEGs with different molecular weights are readily available and low-cost, while the poor capacity for post-polymerization modifications of linear PEG limited its application on a greater scale. Herein, a linear PEG-based analogue functionalized with multiple phenolic hydroxyl moieties, PEGDA-DTT-HPA, was designed and synthesized via Michael-type polyaddition combined with Steglich esterification. Environmentally friendly hydrogels composed of PEGDA-DTT-HPA were facilely formed under the catalysis of horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H₂O₂). The gelation time and mechanical strengths of hydrogels were found to be adjusted independently by altering the concentrations of HRP and H₂O₂, respectively. The hydrogels were further demonstrated as protein drug and cell carriers using bovine serum albumin (BSA) and lentivirus-mediated LifeAct-EGFP overexpressed human mesenchymal stem cells (hMSCs-LifeAct-EGFP), respectively. The BSA-loaded hydrogel systems exhibited a sustained drug release over 3 weeks; the encapsulated hMSCs showed good viability over all time points assessed. Consequently, the current study opens new avenues for the design of PEG-based injectable hydrogels and the PEGDA-DTT-HPA hydrogel has great potential for applications in drug delivery, 3D cell culture and tissue regeneration.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

ROS-responsive poly(ε-caprolactone) with pendent thioether and selenide motifs

Synthesis and oxidation properties of three chalcogen-containing ROS-responsive poly(ε-caprolactone)s have been reported.

A Review of Injectable Polymeric Hydrogel Systems for Application in Bone Tissue Engineering

Biodegradable, stimuli-responsive polymers are essential platforms in the field of drug delivery and injectable biomaterials for application of bone tissue engineering. Various thermo-responsive hydrogels display water-based homogenous properties to encapsulate, manipulate and transfer its contents to the surrounding tissue, in the least invasive manner. The success of bioengineered injectable tissue modified delivery systems depends significantly on their chemical, physical and biological properties. Irrespective of shape and defect geometry, injectable therapy has an unparalleled advantage in which intricate therapy sites can be effortlessly targeted with minimally invasive procedures. Using material testing, it was found that properties of stimuli-responsive hydrogel systems enhance cellular responses and cell distribution at any site prior to the transitional phase leading to gelation. The substantially hydrated nature allows significant simulation of the extracellular matrix (ECM), due to its similar structural properties. Significant current research strategies have been identified and reported to date by various institutions, with particular attention to thermo-responsive hydrogel delivery systems, and their pertinent focus for bone tissue engineering. Research on future perspective studies which have been proposed for evaluation, have also been reported in this review, directing considerable attention to the modification of delivering natural and synthetic polymers, to improve their biocompatibility and mechanical properties.

Protein-polymer conjugation-moving beyond PEGylation

In this review, we summarize-from a materials science perspective-the current state of the field of polymer conjugates of peptide and protein drugs, with a focus on polymers that have been developed as alternatives to the current gold standard, poly(ethylene glycol) (PEG). PEGylation, or the covalent conjugation of PEG to biological therapeutics to improve their therapeutic efficacy by increasing their circulation half-lives and stability, has been the gold standard in the pharmaceutical industry for several decades. After years of research and development, the limitations of PEG, specifically its non-degradability and immunogenicity have become increasingly apparent. While PEG is still currently the best polymer available with the longest clinical track record, extensive research is underway to develop alternative materials in an effort to address these limitations of PEG. Many of these alternative materials have shown promise, though most of them are still in an early stage of development and their in vivo distribution, mechanism of degradation, route of elimination and immunogenicity have not been investigated to a similar extent as for PEG. Thus, further in-depth in vivo testing is essential to validate whether any of the alternative materials discussed in this review qualify as a replacement for PEG.

Synthesis of thermal and oxidation dual responsive polymers for reactive oxygen species (ROS)-triggered drug release

A PEG-based main chain thermo-responsive polymer with oxidation-triggerable thioether groups: synthesis, characterization and its use for ROS-responsive drug release.

Poly[(ethylene oxide)-co-(methylene ethylene oxide)]: A hydrolytically-degradable poly(ethylene oxide) platform

A facile method for imparting hydrolytic degradability to poly(ethylene oxide) (PEO), compatible with current PEGylation strategies, is presented. By incorporating methylene ethylene oxide (MEO) units into the parent PEO backbone, complete degradation was defined by the molar incorporation of MEO, and the structure of the degradation byproducts was consistent with an acid-catalyzed vinyl-ether hydrolysis mechanism. The hydrolytic degradation of poly[(ethylene oxide)-co-(methylene ethylene oxide)] was pH-sensitive, with degradation at pH 5 being significantly faster than at pH 7.4 at 37 °C in PBS buffer while long-term stability could be obtained in either the solid-state or at pH 7.4 at 6 °C.

Rheological properties of aqueous micellar gels of a thermo- and pH-sensitive ABA triblock copolymer

This article presents a systematic study of the effect of pH on the rheological properties of aqueous micellar gels formed from 10.0 wt % aqueous solutions of a thermo- and pH-sensitive ABA triblock copolymer, poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid)-b-poly(ethylene oxide)-b-poly(ethoxydi(ethylene glycol) acrylate-co-acrylic acid) (P(DEGEA-co-AA)-b-PEO-b-P(DEGEA-co-AA)). The block copolymer was synthesized by atom transfer radical polymerization of DEGEA and tert-butyl acrylate with a molar ratio of 100:5 from a difunctional PEO macroinitiator and subsequent removal of tert-butyl groups using trifluoroacetic acid. PDEGEA is a thermosensitive water-soluble polymer with a cloud point of 9 °C in water. The thermo-induced sol-gel transition temperature (T(sol-gel)) of the 10.0 wt % aqueous solution of P(DEGEA-co-AA)-b-PEO-b-P(DEGEA-co-AA) can be continuously and reversibly tuned over a wide temperature range by varying the solution pH. The sol-gel transition became broader with the increase of pH, which stemmed from the weaker and broader LCST transition of P(DEGEA-co-AA) blocks at higher pH values. The maximum value of dynamic storage modulus, obtained from heating ramp, and the plateau storage moduli (G(N)), evaluated from frequency sweeps at three normalized temperatures (T/T(sol-gel) = 1.025, 1.032, and 1.039), decreased with the increase of pH from 3.00 to 5.40 with the sharpest drop observed at pH = ∼4.7. The decrease in G(N) reflects the reduction of the number of bridging polymer chains and simultaneously the increase of the numbers of loops and dangling polymer chains. The ionization of carboxylic acid groups at higher pH values introduced charges onto the thermosensitive blocks and made the polymer chains more hydrophilic, facilitating the formation of loops and dangling chains in the gels. The increase in the number of dangling polymer chains with the increase of pH was supported by fluorescence spectroscopy studies, which showed that the critical micelle concentration of P(DEGEA-co-AA)-b-PEO-b-P(DEGEA-co-AA) at a temperature corresponding to T(sol-gel) was higher at a higher pH. The results reported in this article showed that both T(sol-gel) and gel strength can be tuned by varying the solution pH, providing greater design flexibility for potential applications.

Thermosensitive aqueous gels with tunable sol-gel transition temperatures from thermo- and pH-responsive hydrophilic ABA triblock copolymer

This article reports on the synthesis of a well-defined hydrophilic ABA triblock copolymer composed of a poly(ethylene oxide) (PEO) middle block and thermo- and pH-sensitive outer blocks and the study of sol-gel transitions of its aqueous solutions at various pH values. The doubly responsive linear triblock copolymer, poly(methoxydi(ethylene glycol) methacrylate-co-methacrylic acid)-b-PEO-b-poly(methoxydi(ethylene glycol) methacrylate-co-methacrylic acid) (P(DEGMMA-co-MAA)-b-PEO-b-P(DEGMMA-co-MAA)), was prepared by atom transfer radical polymerization of a mixture of DEGMMA and tert-butyl methacrylate with a molar ratio of 100: 5 from a difunctional PEO macroinitiator and subsequent removal of tert-butyl groups using trifluoroacetic acid. Dynamic light scattering studies showed that the critical micellization temperature (CMT) of this ABA triblock copolymer in a 0.2 wt % aqueous solution was dependent on the solution pH and can be varied in a large temperature range (>20 degrees C). To study the sol-gel transitions, a 12.0 wt % aqueous solution of the triblock copolymer with a pH of 4.89 was made; its pH value can be readily changed and well controlled by the injection of either a 1.0 M HCl or a 1.0 M KOH solution. From rheological measurements, the sol-gel transition temperature (T(sol-gel)) versus pH curve was found to closely trace the CMT versus pH curve, though there was a shift. By cycling the solution pH between 3.2 and 5.4, we showed that the T(sol-gel) at a specific pH was reproducible. Moreover, multiple sol-gel-sol transitions were realized by judiciously controlling the temperature and pH simultaneously, demonstrating the possibility of achieving on-demand sol-gel transitions by using two external stimuli. In addition, the effect of polymer concentration on T(sol-gel) at pH = 4.0 was investigated. The sol-gel transition temperature increased with the decrease of polymer concentration and the critical gelation concentration was found to be between 4 and 6 wt %.