1
|
Walker AR, Sloneker JR, Garno JC. Molecular-level studies of extracellular matrix proteins conducted using atomic force microscopy. Biointerphases 2024; 19:050801. [PMID: 39269167 DOI: 10.1116/6.0003789] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2024] [Accepted: 08/13/2024] [Indexed: 09/15/2024] Open
Abstract
Extracellular matrix (ECM) proteins provide anchorage and structural strength to cells and tissues in the body and, thus, are fundamental molecular components for processes of cell proliferation, growth, and function. Atomic force microscopy (AFM) has increasingly become a valuable approach for studying biological molecules such as ECM proteins at the level of individual molecules. Operational modes of AFM can be used to acquire the measurements of the physical, electronic, and mechanical properties of samples, as well as for viewing the intricate details of the surface chemistry of samples. Investigations of the morphology and properties of biomolecules at the nanoscale can be useful for understanding the interactions between ECM proteins and biological molecules such as cells, DNA, and other proteins. Methods for preparing protein samples for AFM studies require only basic steps, such as the immersion of a substrate in a dilute solution or protein, or the deposition of liquid droplets of protein suspensions on a flat, clean surface. Protocols of nanolithography have been used to define the arrangement of proteins for AFM studies. Using AFM, mechanical and force measurements with tips that are coated with ECM proteins can be captured in ambient or aqueous environments. In this review, representative examples of AFM studies are described for molecular-level investigations of the structure, surface assembly, protein-cell interactions, and mechanical properties of ECM proteins (collagen, elastin, fibronectin, and laminin). Methods used for sample preparation as well as characterization with modes of AFM will be discussed.
Collapse
Affiliation(s)
- Ashley R Walker
- Chemistry Department, Louisiana State University, 232 Choppin Hall, Baton Rouge, Los Angeles 70803
| | - Jonathan R Sloneker
- Chemistry Department, Louisiana State University, 232 Choppin Hall, Baton Rouge, Los Angeles 70803
| | - Jayne C Garno
- Chemistry Department, Louisiana State University, 232 Choppin Hall, Baton Rouge, Los Angeles 70803
| |
Collapse
|
2
|
Horrocks MS, Kollmetz T, O'Reilly P, Nowak D, Malmström J. Quantitative analysis of biomolecule release from polystyrene- block-polyethylene oxide thin films. SOFT MATTER 2022; 18:4513-4526. [PMID: 35674502 DOI: 10.1039/d2sm00383j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Block copolymers have garnered recent attention due to their ability to contain molecular cargo within nanoscale domains and release said cargo in aqueous environments. However, the release kinetics of cargo from these thin-films has not yet been reported. Knowledge of the release quantities and release profiles of these systems is paramount for applications of these systems. Here, Polystyrene-block-poly(ethylene oxide) (PS-b-PEO) was co-assembled with fluorescein isothiocyanate isomer I-lysozyme (FITC-LZ) and fluorescein isothiocyanate isomer I-TAT (FITC-TAT), such that these molecular cargos arrange within the PEO domains of the thin films. We show that high loading ratios of cargo/PS-b-PEO do not significantly impact the nanostructure of the films; however, a loading limit appears to be present with aggregates of protein forming at the microscale with higher loading ratios. The presence of lysozyme (LZ) within the films was confirmed qualitatively after aqueous exposure through photo-induced force microscopy (PiFM) imaging at the Amide I characteristic peak (∼1650 cm-1). Furthermore, we demonstrate that LZ maintains activity and structure after exposure to the polymer solvent (benzene/methanol/water mix). Finally, we demonstrate quantitatively 20-80 ng cm-2 of cargo is released from these films, depending on the cargo incorporated. We show that the larger molecule lysozyme is released over a longer time than the smaller TAT peptide. Finally, we demonstrate the ability to tune the quantity of cargo released by altering the thickness of the PS-b-PEO thin-films during fabrication.
Collapse
Affiliation(s)
- Matthew S Horrocks
- Chemical and Materials Engineering, The University of Auckland, New Zealand.
- The MacDiarmid Institute for Advanced Materials and Nanotechnology, Wellington, New Zealand
| | - Tarek Kollmetz
- Chemical and Materials Engineering, The University of Auckland, New Zealand.
- The MacDiarmid Institute for Advanced Materials and Nanotechnology, Wellington, New Zealand
| | | | | | - Jenny Malmström
- Chemical and Materials Engineering, The University of Auckland, New Zealand.
- The MacDiarmid Institute for Advanced Materials and Nanotechnology, Wellington, New Zealand
| |
Collapse
|
3
|
Raj V, Jagadish C, Gautam V. Understanding, engineering, and modulating the growth of neural networks: An interdisciplinary approach. BIOPHYSICS REVIEWS 2021; 2:021303. [PMID: 38505122 PMCID: PMC10903502 DOI: 10.1063/5.0043014] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/05/2021] [Accepted: 05/25/2021] [Indexed: 03/21/2024]
Abstract
A deeper understanding of the brain and its function remains one of the most significant scientific challenges. It not only is required to find cures for a plethora of brain-related diseases and injuries but also opens up possibilities for achieving technological wonders, such as brain-machine interface and highly energy-efficient computing devices. Central to the brain's function is its basic functioning unit (i.e., the neuron). There has been a tremendous effort to understand the underlying mechanisms of neuronal growth on both biochemical and biophysical levels. In the past decade, this increased understanding has led to the possibility of controlling and modulating neuronal growth in vitro through external chemical and physical methods. We provide a detailed overview of the most fundamental aspects of neuronal growth and discuss how researchers are using interdisciplinary ideas to engineer neuronal networks in vitro. We first discuss the biochemical and biophysical mechanisms of neuronal growth as we stress the fact that the biochemical or biophysical processes during neuronal growth are not independent of each other but, rather, are complementary. Next, we discuss how utilizing these fundamental mechanisms can enable control over neuronal growth for advanced neuroengineering and biomedical applications. At the end of this review, we discuss some of the open questions and our perspectives on the challenges and possibilities related to controlling and engineering the growth of neuronal networks, specifically in relation to the materials, substrates, model systems, modulation techniques, data science, and artificial intelligence.
Collapse
Affiliation(s)
- Vidur Raj
- Department of Electronic Materials Engineering, Research School of Physics, The Australian National University, Canberra, Australian Capital Territory 2601, Australia
| | | | - Vini Gautam
- Department of Biomedical Engineering, Faculty of Engineering and Information Technology, The University of Melbourne, Melbourne, Victoria 3010, Australia
| |
Collapse
|
4
|
Lopes SV, Collins MN, Reis RL, Oliveira JM, Silva-Correia J. Vascularization Approaches in Tissue Engineering: Recent Developments on Evaluation Tests and Modulation. ACS APPLIED BIO MATERIALS 2021; 4:2941-2956. [DOI: 10.1021/acsabm.1c00051] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Soraia V. Lopes
- 3B’s Research Group, Research Institute on Biomaterials, Biodegradables and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, Guimarães 4805-017, Portugal
- ICVS/3B’s − PT Government Associate Laboratory, Braga/Guimarães, Portugal
| | - Maurice N. Collins
- Bernal Institute, School of Engineering, University of Limerick, Limerick V94 T9PX, Ireland
| | - Rui L. Reis
- 3B’s Research Group, Research Institute on Biomaterials, Biodegradables and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, Guimarães 4805-017, Portugal
- ICVS/3B’s − PT Government Associate Laboratory, Braga/Guimarães, Portugal
| | - Joaquim M. Oliveira
- 3B’s Research Group, Research Institute on Biomaterials, Biodegradables and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, Guimarães 4805-017, Portugal
- ICVS/3B’s − PT Government Associate Laboratory, Braga/Guimarães, Portugal
| | - Joana Silva-Correia
- 3B’s Research Group, Research Institute on Biomaterials, Biodegradables and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, Guimarães 4805-017, Portugal
- ICVS/3B’s − PT Government Associate Laboratory, Braga/Guimarães, Portugal
| |
Collapse
|
5
|
Novel fibrin-fibronectin matrix accelerates mice skin wound healing. Bioact Mater 2020; 5:949-962. [PMID: 32671290 PMCID: PMC7334397 DOI: 10.1016/j.bioactmat.2020.06.015] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2020] [Revised: 06/22/2020] [Accepted: 06/22/2020] [Indexed: 01/13/2023] Open
Abstract
Plasma fibrinogen (F1) and fibronectin (pFN) polymerize to form a fibrin clot that is both a hemostatic and provisional matrix for wound healing. About 90% of plasma F1 has a homodimeric pair of γ chains (γγF1), and 10% has a heterodimeric pair of γ and more acidic γ' chains (γγ'F1). We have synthesized a novel fibrin matrix exclusively from a 1:1 (molar ratio) complex of γγ'F1 and pFN in the presence of highly active thrombin and recombinant Factor XIII (rFXIIIa). In this matrix, the fibrin nanofibers were decorated with pFN nanoclusters (termed γγ'F1:pFN fibrin). In contrast, fibrin made from 1:1 mixture of γγF1 and pFN formed a sporadic distribution of "pFN droplets" (termed γγF1+pFN fibrin). The γγ'F1:pFN fibrin enhanced the adhesion of primary human umbilical vein endothelium cells (HUVECs) relative to the γγF1+FN fibrin. Three dimensional (3D) culturing showed that the γγ'F1:pFN complex fibrin matrix enhanced the proliferation of both HUVECs and primary human fibroblasts. HUVECs in the 3D γγ'F1:pFN fibrin exhibited a starkly enhanced vascular morphogenesis while an apoptotic growth profile was observed in the γγF1+pFN fibrin. Relative to γγF1+pFN fibrin, mouse dermal wounds that were sealed by γγ'F1:pFN fibrin exhibited accelerated and enhanced healing. This study suggests that a 3D pFN presentation on a fibrin matrix promotes wound healing.
Collapse
|
6
|
Engineered systems to study the synergistic signaling between integrin-mediated mechanotransduction and growth factors (Review). Biointerphases 2018; 13:06D302. [DOI: 10.1116/1.5045231] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
7
|
Lopes D, Martins-Cruz C, Oliveira MB, Mano JF. Bone physiology as inspiration for tissue regenerative therapies. Biomaterials 2018; 185:240-275. [PMID: 30261426 PMCID: PMC6445367 DOI: 10.1016/j.biomaterials.2018.09.028] [Citation(s) in RCA: 209] [Impact Index Per Article: 34.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2018] [Revised: 09/15/2018] [Accepted: 09/17/2018] [Indexed: 12/14/2022]
Abstract
The development, maintenance of healthy bone and regeneration of injured tissue in the human body comprise a set of intricate and finely coordinated processes. However, an analysis of current bone regeneration strategies shows that only a small fraction of well-reported bone biology aspects has been used as inspiration and transposed into the development of therapeutic products. Specific topics that include inter-scale bone structural organization, developmental aspects of bone morphogenesis, bone repair mechanisms, role of specific cells and heterotypic cell contact in the bone niche (including vascularization networks and immune system cells), cell-cell direct and soluble-mediated contact, extracellular matrix composition (with particular focus on the non-soluble fraction of proteins), as well as mechanical aspects of native bone will be the main reviewed topics. In this Review we suggest a systematic parallelization of (i) fundamental well-established biology of bone, (ii) updated and recent advances on the understanding of biological phenomena occurring in native and injured tissue, and (iii) critical discussion of how those individual aspects have been translated into tissue regeneration strategies using biomaterials and other tissue engineering approaches. We aim at presenting a perspective on unexplored aspects of bone physiology and how they could be translated into innovative regeneration-driven concepts.
Collapse
Affiliation(s)
- Diana Lopes
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal
| | - Cláudia Martins-Cruz
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal
| | - Mariana B Oliveira
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal.
| | - João F Mano
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal.
| |
Collapse
|
8
|
Zhang H, Zheng X, Ahmed W, Yao Y, Bai J, Chen Y, Gao C. Design and Applications of Cell-Selective Surfaces and Interfaces. Biomacromolecules 2018; 19:1746-1763. [PMID: 29665330 DOI: 10.1021/acs.biomac.8b00264] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Tissue regeneration involves versatile types of cells. The accumulation and disorganized behaviors of undesired cells impair the natural healing process, leading to uncontrolled immune response, restenosis, and/or fibrosis. Cell-selective surfaces and interfaces can have specific and positive effects on desired types of cells, allowing tissue regeneration with restored structures and functions. This review outlines the importance of surfaces and interfaces of biomaterials with cell-selective properties. The chemical and biological cues including peptides, antibodies, and other molecules, physical cues such as topography and elasticity, and physiological cues referring mainly to interactions between cells-cells and cell-chemokines or cytokines are effective modulators for achieving cell selectivity upon being applied into the design of biomaterials. Cell-selective biomaterials have also shown practical significance in tissue regeneration, in particular for endothelialization, nerve regeneration, capture of stem cells, and regeneration of tissues of multiple structures and functions.
Collapse
Affiliation(s)
- Haolan Zhang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Xiaowen Zheng
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Wajiha Ahmed
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Yuejun Yao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Jun Bai
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Yicheng Chen
- Department of Urology, Sir Run-Run Shaw Hospital, College of Medicine , Zhejiang University , Hangzhou 310016 , China
| | - Changyou Gao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| |
Collapse
|
9
|
Pradhan S, Keller KA, Sperduto JL, Slater JH. Fundamentals of Laser-Based Hydrogel Degradation and Applications in Cell and Tissue Engineering. Adv Healthc Mater 2017; 6:10.1002/adhm.201700681. [PMID: 29065249 PMCID: PMC5797692 DOI: 10.1002/adhm.201700681] [Citation(s) in RCA: 45] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2017] [Revised: 08/13/2017] [Indexed: 12/24/2022]
Abstract
The cell and tissue engineering fields have profited immensely through the implementation of highly structured biomaterials. The development and implementation of advanced biofabrication techniques have established new avenues for generating biomimetic scaffolds for a multitude of cell and tissue engineering applications. Among these, laser-based degradation of biomaterials is implemented to achieve user-directed features and functionalities within biomimetic scaffolds. This review offers an overview of the physical mechanisms that govern laser-material interactions and specifically, laser-hydrogel interactions. The influences of both laser and material properties on efficient, high-resolution hydrogel degradation are discussed and the current application space in cell and tissue engineering is reviewed. This review aims to acquaint readers with the capability and uses of laser-based degradation of biomaterials, so that it may be easily and widely adopted.
Collapse
Affiliation(s)
- Shantanu Pradhan
- Department of Biomedical Engineering, University of Delaware, 150 Academy Street, 161 Colburn Lab, Newark DE 19716, USA
| | - Keely A. Keller
- Department of Biomedical Engineering, University of Delaware, 150 Academy Street, 161 Colburn Lab, Newark DE 19716, USA
| | - John L. Sperduto
- Department of Biomedical Engineering, University of Delaware, 150 Academy Street, 161 Colburn Lab, Newark DE 19716, USA
| | - John H. Slater
- Department of Biomedical Engineering, University of Delaware, 150 Academy Street, 161 Colburn Lab, Newark DE 19716, USA
- Delaware Biotechnology Institute, 15 Innovation Way, Newark, DE 19711, USA
- Department of Materials Science and Engineering, University of Delaware, 201 DuPont Hall, Newark, DE 19716, USA
| |
Collapse
|
10
|
Vöhringer M, Hartleb W, Lienkamp K. Surface Structuring Meets Orthogonal Chemical Modifications: Toward a Technology Platform for Site-Selectively Functionalized Polymer Surfaces and BioMEMS. ACS Biomater Sci Eng 2017; 3:909-921. [PMID: 33429563 DOI: 10.1021/acsbiomaterials.7b00140] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
A manufacturing process for the site-selective modification of structured (bio)material surfaces with two different polymers/biomolecules is presented. In the first step, a chemical surface contrast is created (e.g., a gold-on-silicon contrast obtained by colloidal lithography), and is combined with two orthogonal surface reactions for polymer/biomolecule immobilization. To demonstrate this, an antimicrobial SMAMP polymer and a protein-repellent polyzwitterion were site-selectively surface-immobilized on the gold-silicon structures. By varying the structure spacing and the surface architecture, structure-property relationships for the interaction of these bifunctional polymer surfaces with bacteria and proteins were obtained (studied by fluorescence microscopy, atomic force microscopy, surface plasmon resonance spectroscopy, and antimicrobial assays). At 1 μm spacing, a fully antimicrobially active bifunctional material was obtained, which also near-quantitatively reduced protein adhesion. As the process is generally applicable to polymers/biomolecules with aliphatic CH-groups, it is an interesting platform technology for site-selectively functionalized bifunctional (Bio)MEMS.
Collapse
Affiliation(s)
- Maria Vöhringer
- Department of Microsystems Engineering (IMTEK) and Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), Albert-Ludwigs-Universität, Georges-Köhler-Allee 103, 79110 Freiburg, Germany
| | - Wibke Hartleb
- Department of Microsystems Engineering (IMTEK) and Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), Albert-Ludwigs-Universität, Georges-Köhler-Allee 103, 79110 Freiburg, Germany
| | - Karen Lienkamp
- Department of Microsystems Engineering (IMTEK) and Freiburg Center for Interactive Materials and Bioinspired Technologies (FIT), Albert-Ludwigs-Universität, Georges-Köhler-Allee 103, 79110 Freiburg, Germany
| |
Collapse
|
11
|
Greiner AM, Sales A, Chen H, Biela SA, Kaufmann D, Kemkemer R. Nano- and microstructured materials for in vitro studies of the physiology of vascular cells. BEILSTEIN JOURNAL OF NANOTECHNOLOGY 2016; 7:1620-1641. [PMID: 28144512 PMCID: PMC5238670 DOI: 10.3762/bjnano.7.155] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/26/2016] [Accepted: 10/04/2016] [Indexed: 05/21/2023]
Abstract
The extracellular environment of vascular cells in vivo is complex in its chemical composition, physical properties, and architecture. Consequently, it has been a great challenge to study vascular cell responses in vitro, either to understand their interaction with their native environment or to investigate their interaction with artificial structures such as implant surfaces. New procedures and techniques from materials science to fabricate bio-scaffolds and surfaces have enabled novel studies of vascular cell responses under well-defined, controllable culture conditions. These advancements are paving the way for a deeper understanding of vascular cell biology and materials-cell interaction. Here, we review previous work focusing on the interaction of vascular smooth muscle cells (SMCs) and endothelial cells (ECs) with materials having micro- and nanostructured surfaces. We summarize fabrication techniques for surface topographies, materials, geometries, biochemical functionalization, and mechanical properties of such materials. Furthermore, various studies on vascular cell behavior and their biological responses to micro- and nanostructured surfaces are reviewed. Emphasis is given to studies of cell morphology and motility, cell proliferation, the cytoskeleton and cell-matrix adhesions, and signal transduction pathways of vascular cells. We finalize with a short outlook on potential interesting future studies.
Collapse
Affiliation(s)
- Alexandra M Greiner
- Karlsruhe Institute of Technology (KIT), Institute of Zoology, Department of Cell and Neurobiology, Haid-und-Neu-Strasse 9, 76131 Karlsruhe, Germany
- now at: Pforzheim University, School of Engineering, Tiefenbronner Strasse 65, 75175 Pforzheim, Germany
| | - Adria Sales
- Max Planck Institute for Intelligent Systems, Department of New Materials and Biosystems, Heisenbergstrasse 3, 70569 Stuttgart, Germany
| | - Hao Chen
- Karlsruhe Institute of Technology (KIT), Institute of Zoology, Department of Cell and Neurobiology, Haid-und-Neu-Strasse 9, 76131 Karlsruhe, Germany
| | - Sarah A Biela
- Max Planck Institute for Intelligent Systems, Department of New Materials and Biosystems, Heisenbergstrasse 3, 70569 Stuttgart, Germany
| | - Dieter Kaufmann
- Universitätsklinikum Ulm, Institut für Humangenetik, Albert Einstein Allee 11, 89070 Ulm, Germany
| | - Ralf Kemkemer
- Max Planck Institute for Intelligent Systems, Department of New Materials and Biosystems, Heisenbergstrasse 3, 70569 Stuttgart, Germany
- Reutlingen University, Faculty of Applied Chemistry, Alteburgstrasse 150, 72762 Reutlingen, Germany
| |
Collapse
|
12
|
Mao AS, Shin JW, Mooney DJ. Effects of substrate stiffness and cell-cell contact on mesenchymal stem cell differentiation. Biomaterials 2016; 98:184-91. [PMID: 27203745 DOI: 10.1016/j.biomaterials.2016.05.004] [Citation(s) in RCA: 185] [Impact Index Per Article: 23.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2015] [Revised: 04/18/2016] [Accepted: 05/02/2016] [Indexed: 11/19/2022]
Abstract
The mechanical properties of the microenvironment and direct contact-mediated cell-cell interactions are two variables known to be important in the determination of stem cell differentiation fate, but little is known about the interplay of these cues. Here, we use a micropatterning approach on polyacrylamide gels of tunable stiffnesses to study how homotypic cell-cell contacts and mechanical stiffness affect different stages of osteogenesis of mesenchymal stem cells (MSCs). Nuclear localization of transcription factors associated with osteogenesis depended on substrate stiffness and was independent of the degree of cell-cell contact. However, expression of alkaline phosphatase, an early protein marker for osteogenesis, increased only in cells with both direct contact with neighboring cells and adhesion to stiffer substrates. Finally, mature osteogenesis, as assessed by calcium deposition, was low in micropatterned cells, even on stiff substrates and in multicellular clusters. These results indicate that substrate stiffness and the presence of neighboring cells regulate osteogenesis in MSCs.
Collapse
Affiliation(s)
- Angelo S Mao
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford St, Cambridge, MA 02138, USA; Wyss Institute for Biologically Inspired Engineering, Harvard University, 3 Blackfan Circle, Boston, MA 02115, USA
| | - Jae-Won Shin
- Department of Pharmacology, University of Illinois College of Medicine, Chicago, IL 60612, USA
| | - David J Mooney
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, 29 Oxford St, Cambridge, MA 02138, USA; Wyss Institute for Biologically Inspired Engineering, Harvard University, 3 Blackfan Circle, Boston, MA 02115, USA.
| |
Collapse
|
13
|
Park S, Bastatas L, Matthews J, Lee YJ. Mechanical responses of cancer cells on nanoscaffolds for adhesion size control. Macromol Biosci 2015; 15:851-60. [PMID: 25761154 DOI: 10.1002/mabi.201400504] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2014] [Revised: 02/03/2015] [Indexed: 01/15/2023]
Abstract
A mechano-reciprocal interaction plays a critical role for cancer cells searching for favorable metastasis sites. For this study, we utilized nanoscaffolds that can control the maturation of focal adhesions in order to investigate how cancer cells mechanically respond to their nanoenvironments. We found that prostate cancer cells showed linearly decreasing proliferation rate and mechanical stiffness as the size of nanoislands on nanoscaffolds where the cells were grown decreases. This mechanical signature was exacerbated for less metastatic prostate cancer cells. However, there was no dependence of mechanical responses on the geometric properties of nanoscaffolds for breast cancer cells, despite the acute inhibition of adhesion and the abrupt mechanical changes. We believe that our holistic approach that utilizes atomic force microscopy (AFM) and nanoscaffolds can reveal which mechano-reciprocal interactions are crucial for metastasis and, thus, provide useful information for anti-cancer drug development targeting integrin-associated signaling.
Collapse
Affiliation(s)
- Soyeun Park
- College of Pharmacy, Keimyung University, 1095 Dalgubeoldaero, Dalseo-Gu, Daegu, 704-701, Republic of Korea.
| | - Lyndon Bastatas
- Department of Physics, Texas Tech University, Box 41051, Lubbock, Texas, 79409, USA
| | - James Matthews
- Department of Physics, Texas Tech University, Box 41051, Lubbock, Texas, 79409, USA
| | - Yong Joong Lee
- College of Pharmacy, Keimyung University, 1095 Dalgubeoldaero, Dalseo-Gu, Daegu, 704-701, Republic of Korea. .,School of Mechanical Engineering, Kyungpook National University, 80 Daehak-ro, Buk-gu, Daegu, 702-701, Republic of Korea.
| |
Collapse
|
14
|
Slater JH, Boyce PJ, Jancaitis MP, Gaubert HE, Chang AL, Markey MK, Frey W. Modulation of endothelial cell migration via manipulation of adhesion site growth using nanopatterned surfaces. ACS APPLIED MATERIALS & INTERFACES 2015; 7:4390-4400. [PMID: 25625303 DOI: 10.1021/am508906f] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Orthogonally functionalized nanopatterend surfaces presenting discrete domains of fibronectin ranging from 92 to 405 nm were implemented to investigate the influence of limiting adhesion site growth on cell migration. We demonstrate that limiting adhesion site growth to small, immature adhesions using sub-100 nm patterns induced cells to form a significantly increased number of smaller, more densely packed adhesions that displayed few interactions with actin stress fibers. Human umbilical vein endothelial cells exhibiting these traits displayed highly dynamic fluctuations in spreading and a 4.8-fold increase in speed compared to cells on nonpatterned controls. As adhesions were allowed to mature in size in cells cultured on larger nanopatterns, 222 to 405 nm, the dynamic fluctuations in spread area and migration began to slow, yet cells still displayed a 2.1-fold increase in speed compared to controls. As all restrictions on adhesion site growth were lifted using nonpatterned controls, cells formed significantly fewer, less densely packed, larger, mature adhesions that acted as terminating sites for actin stress fibers and significantly slower migration. The results revealed an exponential decay in cell speed with increased adhesion site size, indicating that preventing the formation of large mature adhesions may disrupt cell stability thereby inducing highly migratory behavior.
Collapse
Affiliation(s)
- John H Slater
- Department of Biomedical Engineering, University of Texas , Austin, Texas 78712, United States
| | | | | | | | | | | | | |
Collapse
|
15
|
Rodda AE, Meagher L, Nisbet DR, Forsythe JS. Specific control of cell–material interactions: Targeting cell receptors using ligand-functionalized polymer substrates. Prog Polym Sci 2014. [DOI: 10.1016/j.progpolymsci.2013.11.006] [Citation(s) in RCA: 47] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
16
|
Bhushan B, Schricker SR. A review of block copolymer-based biomaterials that control protein and cell interactions. J Biomed Mater Res A 2013; 102:2467-80. [PMID: 23893878 DOI: 10.1002/jbm.a.34887] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2013] [Revised: 07/11/2013] [Accepted: 07/17/2013] [Indexed: 11/07/2022]
Abstract
Block copolymers posses the ability to phase separate into micro and nanoscale patterns resulting in nonhomogeneous surfaces and solids. This nonhomogeneity has been harnessed to improve mechanical properties, control degradation, and add functionality to biomaterials. The ability of block copolymers to generate a wide variety of surface chemistries and morphologies can also be harnessed to control protein adsorption, protein conformation, and cell adhesion. Proteins and cells will respond to periodically structured surfaces, so block copolymers have a great deal of potential as biomaterials. This review will explore the ability of block copolymers to control specific biological responses such as cell adhesion, protein adsorption and conformation, parameters that govern the overall host response to a material. In addition, some of the specific applications of block copolymer, antithrombogenic materials and their ability to pattern proteins, will be discussed.
Collapse
Affiliation(s)
- Bharat Bhushan
- Nanoprobe Laboratory for Bio- and Nanotechnology and Biomimetics, The Ohio State University, Columbus, Ohio, 43210
| | | |
Collapse
|
17
|
Lai ES, Huang NF, Cooke JP, Fuller GG. Aligned nanofibrillar collagen regulates endothelial organization and migration. Regen Med 2013; 7:649-61. [PMID: 22954436 DOI: 10.2217/rme.12.48] [Citation(s) in RCA: 52] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
AIM Modulating endothelial cell (EC) morphology and motility, with the aim to influence their biology, might be beneficial for the treatment of vascular disease. We examined the effect of nanoscale matrix anisotropy on EC organization and migration for vascular tissue engineering applications. MATERIALS & METHODS We developed a flow processing technique to generate anisotropic nanofibrillar collagen. Human ECs were cultured on aligned or on randomly oriented collagen, and their cellular alignment and cytoskeletal organization were characterized by immunofluorescence staining and time-lapse microscopy. RESULTS ECs were elongated along the direction of aligned collagen nanofibrils and had organized focal adhesions. Cellular protrusion migrated with greater directionality and higher velocity along the anisotropic nanofibrils compared with cells on random nanofibrils. The flow technique can be adapted to fabricate vascular grafts that support the endothelial phenotype. CONCLUSION Aligned nanofibrillar collagen regulates EC organization and migration, which can significantly contribute to the development of vascular grafts.
Collapse
Affiliation(s)
- Edwina S Lai
- Department of Chemical Engineering, Stanford University, 380 North-South Mall, Stanford, CA 94305, USA
| | | | | | | |
Collapse
|
18
|
Singh AV, Patil R, Thombre DK, Gade WN. Micro-nanopatterning as tool to study the role of physicochemical properties on cell-surface interactions. J Biomed Mater Res A 2013; 101:3019-32. [PMID: 23559501 DOI: 10.1002/jbm.a.34586] [Citation(s) in RCA: 43] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/02/2012] [Revised: 12/27/2012] [Accepted: 12/31/2012] [Indexed: 11/09/2022]
Abstract
The current nano-biotechnologies interfacing synthetic materials and cell biology requires a better understanding of cell-surface interactions on the micro-to-nanometer scale. Cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids to the substrate. The effect of nanotopography and surface chemistry on protein adsorption as well as the mediation effect on subsequent cellular communication with substratum is not well documented. This review discusses the role of physicochemical properties of cell-surface interactions and state-of-the-art methods currently available for micro-nanoscale surface fabrication and patterning. We also briefly discuss the current surface patterning techniques that allow the combination of a fine and independent control on nanotopography and chemistry to understand the effect of surface nanoscale substrate morphology on cell-surface interactions which has never been realized in previous reports. In addition, we discuss the influence of various chemical patterning and modulation of the nano-topography of surfaces on cell functionality and phenotype.
Collapse
Affiliation(s)
- Ajay Vikram Singh
- Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180-3590; Center for Biotechnology and Interdisciplinary Studies, Room 2145, Rensselaer Polytechnic Institute, 110 8th Street, Troy, New York 12180
| | | | | | | |
Collapse
|
19
|
Huang NF, Lai ES, Ribeiro AJS, Pan S, Pruitt BL, Fuller GG, Cooke JP. Spatial patterning of endothelium modulates cell morphology, adhesiveness and transcriptional signature. Biomaterials 2013; 34:2928-37. [PMID: 23357369 PMCID: PMC3581686 DOI: 10.1016/j.biomaterials.2013.01.017] [Citation(s) in RCA: 51] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2012] [Accepted: 01/04/2013] [Indexed: 01/08/2023]
Abstract
Microscale and nanoscale structures can spatially pattern endothelial cells (ECs) into parallel-aligned organization, mimicking their cellular alignment in blood vessels exposed to laminar shear stress. However, the effects of spatial patterning on the function and global transcriptome of ECs are incompletely characterized. We used both parallel-aligned micropatterned and nanopatterned biomaterials to evaluate the effects of spatial patterning on the phenotype of ECs, based on gene expression profiling, functional characterization of monocyte adhesion, and quantification of cellular morphology. We demonstrate that both micropatterned and aligned nanofibrillar biomaterials could effectively guide EC organization along the direction of the micropatterned channels or nanofibrils, respectively. The ability of ECs to sense spatial patterning cues were abrogated in the presence of cytoskeletal disruption agents. Moreover, both micropatterned and aligned nanofibrillar substrates promoted an athero-resistant EC phenotype by reducing endothelial adhesiveness for monocytes and platelets, as well as by downregulating the expression of adhesion proteins and chemokines. We further found that micropatterned ECs have a transcriptional signature that is unique from non-patterned ECs, as well as from ECs aligned by shear stress. These findings highlight the importance of spatial patterning cues in guiding EC organization and function, which may have clinical relevance in the development of vascular grafts that promote patency.
Collapse
Affiliation(s)
- Ngan F Huang
- Division of Cardiovascular Medicine, Stanford University, Stanford, CA 94305, USA
| | | | | | | | | | | | | |
Collapse
|
20
|
Mitra J, Tripathi G, Sharma A, Basu B. Scaffolds for bone tissue engineering: role of surface patterning on osteoblast response. RSC Adv 2013. [DOI: 10.1039/c3ra23315d] [Citation(s) in RCA: 78] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
|
21
|
Chen X, Su YD, Ajeti V, Chen SJ, Campagnola PJ. Cell Adhesion on Micro-Structured Fibronectin Gradients Fabricated by Multiphoton Excited Photochemistry. Cell Mol Bioeng 2012; 5:307-319. [PMID: 23710258 PMCID: PMC3662366 DOI: 10.1007/s12195-012-0237-8] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022] Open
Abstract
Concentration gradients of ECM proteins play active roles in many areas of cell biology including wound healing and metastasis. They may also form the basis of tissue engineering scaffolds, as these can direct cell adhesion and migration and promote new matrix synthesis. To better understand cell-matrix interactions on attractive gradients, we have used multiphoton excited (MPE) photochemistry to fabricate covalently linked micro-structured gradients from fibronectin (FN). The gradient design is comprised of a parallel series of individual linear gradients with overall dimensions of approximately 800 × 800 μm, where a linear dynamic range of nearly 10-fold in concentration was achieved. The adhesion dynamics of 3T3 fibroblasts were investigated, where the cell morphology and actin cytoskeleton became increasingly elongated and aligned with the direction of the gradient at increasing protein concentration. Moreover, the cell morphologies are distinct when adhered to regions of differing FN concentration but with similar topography. These results show that the fabrication approach allows investigating the roles of contact guidance and ECM cues on the cell-matrix interactions. We suggest this design overcomes some of the limitations with other fabrication methods, especially in terms of 3D patterning capabilities, and will serve as a new tool to study cell-matrix interactions.
Collapse
Affiliation(s)
- Xiyi Chen
- Department of Biomedical Engineering, University of Wisconsin-Madison, Madison, WI 53717, USA
| | - Yuan-Deng Su
- Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan
| | - Visar Ajeti
- Department of Biomedical Engineering, University of Wisconsin-Madison, Madison, WI 53717, USA
| | - Shean-Jen Chen
- Department of Engineering Science, National Cheng Kung University, Tainan, Taiwan
| | - Paul J. Campagnola
- Department of Biomedical Engineering, University of Wisconsin-Madison, Madison, WI 53717, USA
| |
Collapse
|
22
|
Li JR, Shi L, Deng Z, Lo SH, Liu GY. Nanostructures of designed geometry and functionality enable regulation of cellular signaling processes. Biochemistry 2012; 51:5876-93. [PMID: 22783801 PMCID: PMC4041195 DOI: 10.1021/bi200880p] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Abstract
Extracellular matrices (ECM) triggered cellular signaling processes often begin with the clustering of the cellular receptors such as integrin and FcεRI. The sizes of these initial protein complexes or clusters are tens to 100 nm in dimension; therefore, engineered nanostructures could provide effective mimics of ECM for investigation and control of the initial and downstream specific signaling processes. This current topic discusses recent advances in nanotechnology in the context of design and production of matching chemical functionality and geometry for control of specific cellular signaling processes. Two investigations are reported to demonstrate this concept: (a) how the presentation of antigen at the nanometer scale would influence the aggregation of FcεRI, which would impact the formation of activation complexes, leading to the rearrangement of actin in cytoskeleton and degranulation or activation of mast cells; (b) how the engineered nanostructure could guide the initial integrin clustering, which would impact the formation of focal adhesion and downstream cell signaling cascades, leading to polarization, migration, and morphological changes. Complementary to engineered ECMs using synthetic ligands or peptides, or topographic control at the micrometer scale, nanostructures of designed geometry and chemical functionality provide new and effective biochemical cues for regulation of cellular signaling processes and downstream behaviors.
Collapse
Affiliation(s)
- Jie-Ren Li
- Department of Chemistry, University of California, Davis, California 95616
| | - Lifang Shi
- Department of Chemistry, University of California, Davis, California 95616
| | - Zhao Deng
- Department of Chemistry, University of California, Davis, California 95616
| | - Su Hao Lo
- Department of Biochemistry and Molecular Medicine, Center for Tissue Regeneration and Repair, University of California-Davis, Medical Center, Sacramento, California 95817
| | - Gang-yu Liu
- Department of Chemistry, University of California, Davis, California 95616
| |
Collapse
|
23
|
Kshatriya PP, Karuri SW, Chiang C, Karuri NW. A combinatorial approach for directing the amount of fibronectin fibrils assembled by cells that uses surfaces derivatized with mixtures of fibronectin and cell binding domains. Biotechnol Prog 2012; 28:862-71. [DOI: 10.1002/btpr.1537] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2011] [Revised: 02/08/2012] [Indexed: 11/10/2022]
|
24
|
Lepzelter D, Bates O, Zaman M. Integrin clustering in two and three dimensions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:5379-86. [PMID: 22204631 PMCID: PMC3314142 DOI: 10.1021/la203725a] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
Integrins are transmembrane proteins that allow cells to bind to their external environment. They are the primary regulators of cell-matrix interactions, with direct roles in cell motility and signaling, which in turn regulate numerous physiological processes. Under common experimental conditions, integrins tend to cluster for sturdy and effective binding to extracellular matrix molecules. These clusters often evolve into focal adhesions, which regulate downstream signaling. However, integrin clusters are more pronounced and have longer lifetimes in two-dimensional assays than in more realistic three-dimensional environments. While a number of models and theoretical approaches have focused on integrin binding and diffusion, the reasons for the differences between two- and three-dimensional clustering have remained elusive. In this study, we model an individual cluster attached to a two-dimensional collagen film and attached to collagen fibers of various sizes in three-dimensional matrices. We then discuss how our results explain differences in size and lifetime, and how they hint at reasons for other differences between the two environments. Further, we make predictions regarding the stability of clusters based on different overall intracellular conditions. Our results show good agreement with experiments and provide a quantitative basis for understanding how matrix dimensionality and structure regulate integrin behavior in environments that mimic in vivo conditions.
Collapse
Affiliation(s)
- David Lepzelter
- Department of Biomedical Engineering, Boston University, Boston, Massachusetts, USA.
| | | | | |
Collapse
|
25
|
Gon S, Santore MM. Sensitivity of protein adsorption to architectural variations in a protein-resistant polymer brush containing engineered nanoscale adhesive sites. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:15083-15091. [PMID: 22040182 DOI: 10.1021/la203293k] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
Patchy polymer brushes contain nanoscale (5-15 nm) adhesive elements, such as polymer coils or nanoparticles, embedded at their base at random positions on the surface. The competition between the brush's steric (protein resistant) repulsions and the attractions from the discrete adhesive elements provides a precise means to control bioadhesion. This differs from the classical approach, where functionality is placed on the brush's periphery. The current study demonstrates the impact of poly(etheylene glycol) (PEG) brush architecture and ionic strength on fibrinogen adsorption on brushes containing embedded poly-l-lysine (PLL, 20K MW) coils or "patches". The consistent appearance of a fibrinogen adsorption threshold, a minimum loading of patches on the surface, below which protein adsorption does not occur, suggests multivalent protein capture: Adsorbing proteins simultaneously engage several patches. The surface composition (patch loading) at the threshold is extremely sensitive to the brush height and ionic strength, varying up to a factor of 5 in the surface loading of the PLL patches (~50% of the range of possible surfaces). Variations in ionic strength have a similar effect, with the smallest thresholds seen for the largest Debye lengths. While trends with brush height were the clearest and most dominant, consideration of the PEG loading within the brush or its persistence length did not reveal a critical brush parameter for the onset of adsorption. The lack of straightforward correlation on brush physics was likely a result of multivalent binding, (producing an additional dependence on patch loading), and might be resolved for univalent adsorption onto more strongly binding patches. While studies with similar brushes placed uniformly on a surface revealed that the PEG loading within the brush is the best indicator of protein resistance, the current results suggest that brush height is more important for patchy brushes. Likely the interactions producing brush extension normal to the interface act similarly to drive lateral tether extension to obstruct patches.
Collapse
Affiliation(s)
- Saugata Gon
- Department of Polymer Science and Engineering, University of Massachusetts, Amherst, Massachusetts 01003, USA
| | | |
Collapse
|
26
|
PEGylated silicon nanowire coated silica microparticles for drug delivery across intestinal epithelium. Biomaterials 2011; 33:1663-72. [PMID: 22116000 DOI: 10.1016/j.biomaterials.2011.11.010] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/14/2011] [Accepted: 11/08/2011] [Indexed: 11/21/2022]
Abstract
Composite particles made by growing nanoscopic silicon wires from the surface of monodispersed, microsized silica beads were tested in this study for their ability to affect the integrity and permeability of an epithelial cell layer. Polyethylene glycol (PEG) is known to sterically stabilize particles and prevent protein binding; as such, it is a routine way to impart in vivo longevity to drug carriers. The effect of the silica beads, both with and without silicon nanowires and PEG, on the disruption of the tight junctions in Caco-2 cells was evaluated by means of: (a) analysis of the localization of zonula occludens-1 (ZO-1), claudin-1 and f-actin; (b) measurements of trans-epithelial electrical resistance (TEER); (c) real-time quantitative RT-PCR analysis of the expression of PKC-α and PKC-z, which regulate the fluidity of cell membranes, and RhoA and Rac1, which are mainly involved in mechanotransduction processes; and (d) drug permeability experiments with fluorescein-sodium. The results have shown that Si-nanowire-coated silica microparticles added to Caco-2 cells in culture lead to alterations in tight junction permeability and the localization of ZO-1 and f-actin, as well as to decreased width of ZO-1 and claudin-1 at the tight junction and increased expression of PKC transcripts. Si-nanowire-coated silica microparticles increased the permeability of Caco-2 cell monolayers to fluorescein-sodium in proportion to their amount. Effects indicative of loosening the Caco-2 cell monolayers and increasing their permeability were less pronounced for PEGylated particles, owing to their greater supposed inertness in comparison with the non-functionalized beads and nanowires. The analyzed Si-nanowire-coated silica microparticles have thus been shown to affect membrane barrier integrity in vitro, suggesting the possibility of using nanostructured microparticles to enhance drug permeability through the intestinal epithelium in vivo.
Collapse
|
27
|
Slater JH, Miller JS, Yu SS, West JL. Fabrication of Multifaceted Micropatterned Surfaces with Laser Scanning Lithography. ADVANCED FUNCTIONAL MATERIALS 2011; 21:2876-2888. [PMID: 29861708 PMCID: PMC5978433 DOI: 10.1002/adfm.201100297] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
The implementation of engineered surfaces presenting micrometer-sized patterns of cell adhesive ligands against a biologically inert background has led to numerous discoveries in fundamental cell biology. While existing surface patterning strategies allow for pattering of a single ligand it is still challenging to fabricate surfaces displaying multiple patterned ligands. To address this issue we implemented Laser Scanning Lithography (LSL), a laser-based thermal desorption technique, to fabricate multifaceted, micropatterned surfaces that display independent arrays of subcellular-sized patterns of multiple adhesive ligands with each ligand confined to its own array. We demonstrate that LSL is a highly versatile "maskless" surface patterning strategy that provides the ability to create patterns with features ranging from 450 nm to 100 μm, topography ranging from -1 to 17 nm, and to fabricate both stepwise and smooth ligand surface density gradients. As validation for their use in cell studies, surfaces presenting orthogonally interwoven arrays of 1×8 μm elliptical patterns of Gly-Arg-Gly-Asp-terminated alkanethiol self-assembled monolayers and human plasma fibronectin are produced. Human umbilical vein endothelial cells cultured on these multifaceted surfaces form adhesion sites to both ligands simultaneously and utilize both ligands for lamella formation during migration. The ability to create multifaceted, patterned surfaces with tight control over pattern size, spacing, and topography provides a platform to simultaneously investigate the complex interactions of extracellular matrix geometry, biochemistry, and topography on cell adhesion and downstream cell behavior.
Collapse
|
28
|
Wheeldon I, Farhadi A, Bick AG, Jabbari E, Khademhosseini A. Nanoscale tissue engineering: spatial control over cell-materials interactions. NANOTECHNOLOGY 2011; 22:212001. [PMID: 21451238 PMCID: PMC3155808 DOI: 10.1088/0957-4484/22/21/212001] [Citation(s) in RCA: 60] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Cells interact with the surrounding environment by making tens to hundreds of thousands of nanoscale interactions with extracellular signals and features. The goal of nanoscale tissue engineering is to harness these interactions through nanoscale biomaterials engineering in order to study and direct cellular behavior. Here, we review two- and three-dimensional (2- and 3D) nanoscale tissue engineering technologies, and provide a holistic overview of the field. Techniques that can control the average spacing and clustering of cell adhesion ligands are well established and have been highly successful in describing cell adhesion and migration in 2D. Extension of these engineering tools to 3D biomaterials has created many new hydrogel and nanofiber scaffold technologies that are being used to design in vitro experiments with more physiologically relevant conditions. Researchers are beginning to study complex cell functions in 3D. However, there is a need for biomaterials systems that provide fine control over the nanoscale presentation of bioactive ligands in 3D. Additionally, there is a need for 2- and 3D techniques that can control the nanoscale presentation of multiple bioactive ligands and that can control the temporal changes in the cellular microenvironment.
Collapse
Affiliation(s)
- Ian Wheeldon
- Department of Medicine, Center for Biomedical Engineering, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Arash Farhadi
- Department of Medicine, Center for Biomedical Engineering, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
- Nanotechnology Engineering Program, University of Waterloo, Waterloo, ON, N2L 3G1 Canada
| | - Alexander G. Bick
- Department of Medicine, Center for Biomedical Engineering, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Esmaiel Jabbari
- Department of Chemical Engineering, University of South Carolina, Columbia, SC, 29208
| | - Ali Khademhosseini
- Department of Medicine, Center for Biomedical Engineering, Brigham and Women’s Hospital, Harvard Medical School, Boston, MA 02115, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| |
Collapse
|
29
|
Tay CY, Irvine SA, Boey FYC, Tan LP, Venkatraman S. Micro-/nano-engineered cellular responses for soft tissue engineering and biomedical applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2011; 7:1361-1378. [PMID: 21538867 DOI: 10.1002/smll.201100046] [Citation(s) in RCA: 75] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/09/2011] [Revised: 03/19/2011] [Indexed: 05/30/2023]
Abstract
The development of biomedical devices and reconstruction of functional ex vivo tissues often requires the need to fabricate biomimetic surfaces with features of sub-micrometer precision. This can be achieved with the advancements in micro-/nano-engineering techniques, allowing researchers to manipulate a plethora of cellular behaviors at the cell-biomaterial interface. Systematic studies conducted on these 2D engineered surfaces have unraveled numerous novel findings that can potentially be integrated as part of the design consideration for future 2D and 3D biomaterials and will no doubt greatly benefit tissue engineering. In this review, recent developments detailing the use of micro-/nano-engineering techniques to direct cellular orientation and function pertinent to soft tissue engineering will be highlighted. Particularly, this article aims to provide valuable insights into distinctive cell interactions and reactions to controlled surfaces, which can be exploited to understand the mechanisms of cell growth on micro-/nano-engineered interfaces, and to harness this knowledge to optimize the performance of 3D artificial soft tissue grafts and biomedical applications.
Collapse
Affiliation(s)
- Chor Yong Tay
- School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, Singapore
| | | | | | | | | |
Collapse
|
30
|
Gon S, Santore MM. Single component and selective competitive protein adsorption in a patchy polymer brush: opposition between steric repulsions and electrostatic attractions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:1487-1493. [PMID: 21207949 DOI: 10.1021/la104592f] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
This work explores the use of "patchy" polymer brushes to control protein adsorption rates on engineered surfaces and to bind targeted species from protein mixtures with high selectivity but without invoking molecular recognition. The brushes of interest contain embedded cationic "patches" composed of isolated adsorbed poly(l-lysine) coils (PLL) that are about 10 nm in diameter and are randomly arranged on a silica substrate. Around these patches is a protein-resistant poly(ethylene glycol) (PEG) brush that is formed from the adsorption of a PLL-g-PEG graft copolymer on the remaining silica surface. Electrostatic attractions between individual cationic patches and the negative regions of approaching proteins may be energetically insufficient to bind proteins. Furthermore, protein-patch attractions are reduced by steric repulsions between proteins and the PEG brush. We show that protein adsorption, gauged by ultimate short-term coverages and by the initial protein adsorption rate, exhibits an adhesion threshold: pure PEG brushes of the architectures employed here and brushes containing sparse loadings of PLL patches do not adsorb protein. Above a critical PLL patch loading or threshold, protein adsorption proceeds, often dramatically. The PLL patch thresholds are specific to the protein of interest, allowing surfaces to be engineered to adhesively discriminate different proteins within a mixture. The separation achieved is remarkably sharp: one protein adsorbs, but the second is completely rejected from the interface. The surfaces in this study, by virtue of their well-controlled and well-characterized patchy nature, distinguish themselves from multicomponent brushes or brushes used to end-tether peptide sequences and nucleotides.
Collapse
Affiliation(s)
- Saugata Gon
- Department of Polymer Science and Engineering, University of Massachusetts-Amherst, Amherst, Massachusetts 01003, USA
| | | |
Collapse
|
31
|
Anselme K, Davidson P, Popa A, Giazzon M, Liley M, Ploux L. The interaction of cells and bacteria with surfaces structured at the nanometre scale. Acta Biomater 2010; 6:3824-46. [PMID: 20371386 DOI: 10.1016/j.actbio.2010.04.001] [Citation(s) in RCA: 451] [Impact Index Per Article: 32.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2009] [Revised: 03/30/2010] [Accepted: 04/01/2010] [Indexed: 12/22/2022]
Abstract
The current development of nanobiotechnologies requires a better understanding of cell-surface interactions on the nanometre scale. Recently, advances in nanoscale patterning and detection have allowed the fabrication of appropriate substrates and the study of cell-substrate interactions. In this review we discuss the methods currently available for nanoscale patterning and their merits, as well as techniques for controlling the surface chemistry of materials at the nanoscale without changing the nanotopography and the possibility of truly characterizing the surface chemistry at the nanoscale. We then discuss the current knowledge of how a cell can interact with a substrate at the nanoscale and the effect of size, morphology, organization and separation of nanofeatures on cell response. Moreover, cell-substrate interactions are mediated by the presence of proteins adsorbed from biological fluids on the substrate. Many questions remain on the effect of nanotopography on protein adsorption. We review papers related to this point. As all these parameters have an influence on cell response, it is important to develop specific studies to point out their relative influence, as well as the biological mechanisms underlying cell responses to nanotopography. This will be the basis for future research in this field. An important topic in tissue engineering is the effect of nanoscale topography on bacteria, since cells have to compete with bacteria in many environments. The limited current knowledge of this topic is also discussed in the light of using topography to encourage cell adhesion while limiting bacterial adhesion. We also discuss current and prospective applications of cell-surface interactions on the nanoscale. Finally, based on questions raised previously that remain to be solved in the field, we propose future directions of research in materials science to help elucidate the relative influence of the physical and chemical aspects of nanotopography on bacteria and cell response with the aim of contributing to the development of nanobiotechnologies.
Collapse
|
32
|
Attia M, Santerre JP, Kandel RA. The response of annulus fibrosus cell to fibronectin-coated nanofibrous polyurethane-anionic dihydroxyoligomer scaffolds. Biomaterials 2010; 32:450-60. [PMID: 20880584 DOI: 10.1016/j.biomaterials.2010.09.010] [Citation(s) in RCA: 55] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2010] [Accepted: 09/06/2010] [Indexed: 12/11/2022]
Abstract
Tissue engineering of the annulus fibrosus(AF), a component of the intervertebral disc, has proven to be challenging due to its complex oriented lamellar structure. Previously it was demonstrated that polyurethane (PU) scaffolds containing an anionic dihydroxy oligomers (ADO) may be suitable to use in this application. The current study examines whether matrix protein(s) coatings (collagen type I, collagen type I and fibronectin, fibronectin, or vitronectin) would promote cell and collagen orientation that more closely mimics native AF. The greatest cell attachment occurred when scaffolds were pre-coated with Fn. Cells on Fn-coated scaffolds were aligned parallel to scaffold fibers, a process that involved α5β1 integrin, as determined by integrin-specific blocking antibodies, which in turn reduced AF cell spreading and alignment. Cell shape was regulated by the actin cytoskeleton as cells grown in the presence of cytochalasin D did not spread. Cells on Fn-coated PU scaffolds formed fibrillar Fn, synthesized significantly more collagen, and showed linear alignment of the secreted type I collagen when compared to cells grown on the other protein-coated scaffolds and the non-coated control. Thus Fn-coating of PU-ADO scaffolds appears to promote properly oriented AF cells and collagen, which should facilitate developing AF tissue that more closely mimics the native tissue.
Collapse
Affiliation(s)
- Menat Attia
- CIHR-BioEngineering of Skeletal Tissues Team, University of Toronto, Ontario, Canada
| | | | | |
Collapse
|
33
|
Malmström J, Christensen B, Lovmand J, Sørensen ES, Duch M, Sutherland DS. Osteopontin presentation affects cell adhesion-Influence of underlying surface chemistry and nanopatterning of osteopontin. J Biomed Mater Res A 2010; 95:518-30. [DOI: 10.1002/jbm.a.32879] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
34
|
Malmström J, Christensen B, Jakobsen HP, Lovmand J, Foldbjerg R, Sørensen ES, Sutherland DS. Large area protein patterning reveals nanoscale control of focal adhesion development. NANO LETTERS 2010; 10:686-694. [PMID: 20044840 DOI: 10.1021/nl903875r] [Citation(s) in RCA: 44] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
Focal adhesion development in cells adherent to surface bound fibronectin presented as 200, 500, or 1000 nm diameter circular patches or as homogeneous controls is studied by fluorescence and scanning electron microscopy. Fundamental cellular processes such as adhesion, spreading, focal adhesion and stress fiber formation are shown to be dependent on the spatial distribution of ligands at this scale. Large area samples enable the study of whole cell populations and opens for new potential applications.
Collapse
Affiliation(s)
- Jenny Malmström
- Interdisciplinary Nanoscience Center (iNANO), Aarhus University, Denmark
| | | | | | | | | | | | | |
Collapse
|
35
|
Hook AL, Voelcker NH, Thissen H. Patterned and switchable surfaces for biomolecular manipulation. Acta Biomater 2009; 5:2350-70. [PMID: 19398391 DOI: 10.1016/j.actbio.2009.03.040] [Citation(s) in RCA: 80] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2008] [Revised: 02/19/2009] [Accepted: 03/24/2009] [Indexed: 01/08/2023]
Abstract
The interactions of biomolecules and cells with solid interfaces play a pivotal role in a range of biomedical applications and have therefore been studied in great detail. An improved understanding of these interactions results in the ability to manipulate DNA, proteins and other biomolecules, as well as cells, spatially and temporally at surfaces with high precision. This in turn engenders the development of advanced devices, such as biosensors, bioelectronic components, smart biomaterials and microarrays. Spatial control can be achieved by the production of patterned surface chemistries using modern high-resolution patterning technologies based on lithography, microprinting or microfluidics, whilst temporal control is accessible through the application of switchable surface architectures. The combination of these two surface properties offers unprecedented control over the behaviour of biomolecules and cells at the solid-liquid interface. This review discusses the behaviour of biomolecules and cells at solid interfaces and highlights fundamental and applied research exploring patterned and switchable surfaces.
Collapse
Affiliation(s)
- A L Hook
- School of Chemistry, Physics and Earth Sciences, Flinders University, Adelaide 5001, Australia.
| | | | | |
Collapse
|
36
|
Colpo P, Ruiz A, Ceriotti L, Rossi F. Surface functionalization for protein and cell patterning. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2009; 117:109-30. [PMID: 19475372 DOI: 10.1007/10_2009_2] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Abstract
The interaction of biological systems with synthetic material surfaces is an important issue for many biological applications such as implanted devices, tissue engineering, cell-based sensors and assays, and more generally biologic studies performed ex vivo. To ensure reliable outcomes, the main challenge resides in the ability to design and develop surfaces or artificial micro-environment that mimic 'natural environment' in interacting with biomolecules and cells without altering their function and phenotype. At this effect, microfabrication, surface chemistry and material science play a pivotal role in the design of advanced in-vitro systems for cell culture applications. In this chapter, we discuss and describe different techniques enabling the control of cell-surface interactions, including the description of some techniques for immobilization of ligands for controlling cell-surface interactions and some methodologies for the creation of well confined cell rich areas.
Collapse
Affiliation(s)
- Pascal Colpo
- European Commission, Joint Research Centre, Institute for Health and Consumer Protection, Via E.Fermi, 2749 TP203, 21027, Ispra, Varese, Italy,
| | | | | | | |
Collapse
|