1
|
Park S, Gwon Y, Kim W, Kim J. Rebirth of the Eggshell Membrane as a Bioactive Nanoscaffold for Tissue Engineering. ACS Biomater Sci Eng 2021; 7:2219-2224. [PMID: 34061495 DOI: 10.1021/acsbiomaterials.1c00552] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
Eggshell membrane (ESM)-based biomaterials have generated significant interest for their potential biomedical applications, including those in tissue engineering and regenerative medicine. Herein, the development of a bioactive ESM-based nanopatterned scaffold for enhancing the adhesion and functions of cells has been described. To control the shape of the raw ESM with entangled protein fibers, a two-step dissolution technique is used. Subsequently, nanoimprint lithography is applied to the ESM solution to fabricate scaffolds with a nanotopographic surface inspired by the fiber alignment of the extracellular matrix. In this way, the morphology and proliferation of attached osteoblasts are sensitively controlled through their response to the nanopatterned topography of the prepared scaffold, allowing significant improvements in their osteogenic differentiation and growth factor secretion. This study demonstrates the potential use of this bioactive ESM-based nanopatterned substrate as an effective cell and tissue engineering scaffold.
Collapse
Affiliation(s)
- Sunho Park
- Department of Rural and Biosystems Engineering, Chonnam National University, Gwangju 61186, Republic of Korea.,Interdisciplinary Program in IT-Bio Convergence System, Chonnam National University, Gwangju 61186, Republic of Korea
| | - Yonghyun Gwon
- Department of Rural and Biosystems Engineering, Chonnam National University, Gwangju 61186, Republic of Korea.,Interdisciplinary Program in IT-Bio Convergence System, Chonnam National University, Gwangju 61186, Republic of Korea
| | - Woochan Kim
- Department of Rural and Biosystems Engineering, Chonnam National University, Gwangju 61186, Republic of Korea.,Interdisciplinary Program in IT-Bio Convergence System, Chonnam National University, Gwangju 61186, Republic of Korea
| | - Jangho Kim
- Department of Rural and Biosystems Engineering, Chonnam National University, Gwangju 61186, Republic of Korea.,Interdisciplinary Program in IT-Bio Convergence System, Chonnam National University, Gwangju 61186, Republic of Korea
| |
Collapse
|
2
|
Zhang T, Gao Y, Cui W, Li Y, Xiao D, Zhou R. Nanomaterials-based Cell Osteogenic Differentiation and Bone Regeneration. Curr Stem Cell Res Ther 2020; 16:36-47. [PMID: 32436831 DOI: 10.2174/1574888x15666200521083834] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2019] [Revised: 01/07/2020] [Accepted: 01/16/2020] [Indexed: 02/08/2023]
Abstract
With the rapid development of nanotechnology, various nanomaterials have been applied to bone repair and regeneration. Due to the unique chemical, physical and mechanical properties, nanomaterials could promote stem cells osteogenic differentiation, which has great potentials in bone tissue engineering and exploiting nanomaterials-based bone regeneration strategies. In this review, we summarized current nanomaterials with osteo-induction ability, which could be potentially applied to bone tissue engineering. Meanwhile, the unique properties of these nanomaterials and their effects on stem cell osteogenic differentiation are also discussed. Furthermore, possible signaling pathways involved in the nanomaterials- induced cell osteogenic differentiation are also highlighted in this review.
Collapse
Affiliation(s)
- Tianxu Zhang
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Yang Gao
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Weitong Cui
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Yanjing Li
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Dexuan Xiao
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| | - Ronghui Zhou
- State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
| |
Collapse
|
3
|
Modi PK, Prabhu A, Bhandary YP, Shenoy P. S, Hegde A, ES SP, Johnson RP, Das SP, Vazirally S, Rekha PD. Effect of calcium glucoheptonate on proliferation and osteogenesis of osteoblast-like cells in vitro. PLoS One 2019; 14:e0222240. [PMID: 31498830 PMCID: PMC6733474 DOI: 10.1371/journal.pone.0222240] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2019] [Accepted: 08/23/2019] [Indexed: 12/16/2022] Open
Abstract
Calcium is the key macromineral having a role in skeletal structure and function, muscle contraction, and neurotransmission. Bone remodeling is maintained through a constant balance between calcium resorption and deposition. Calcium deficiency is resolved through calcium supplementation, and among the supplements, water-soluble organic molecules attracted great pharmaceutical interest. Calcium glucoheptonate is a highly water-soluble organic calcium salt having clinical use; however, detailed investigations on its biological effects are limited. We assessed the effects of calcium glucoheptonate on cell viability and proliferation of osteoblast-like MG-63 cells. Calcium uptake and mineralization were evaluated using Alizarin red staining of osteoblast-like MG-63 cells treated with calcium glucoheptonate. Expression of osteogenic markers were monitored by western blotting, immunofluorescence, and qRT-PCR assays. Increased proliferation and calcium uptake were observed in the MG-63 cells treated with calcium glucoheptonate. The treatment also increased the expression of osteopontin and osteogenic genes such as collagen-1, secreted protein acidic and cysteine rich (SPARC), and osteocalcin. Calcium glucoheptonate treatment did not exert any cytotoxicity on colorectal and renal epithelial cells, indicating the safety of the treatment. This is the first report with evidence for its beneficial effect for pharmaceutical use in addressing calcium deficiency conditions.
Collapse
Affiliation(s)
- Prashant Kumar Modi
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Ashwini Prabhu
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Yashodhar P. Bhandary
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Sudheer Shenoy P.
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Aparna Hegde
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Sindhu Priya ES
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Renjith P. Johnson
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | - Shankar Prasad Das
- Yenepoya Research Centre, Yenepoya (Deemed to be University), Mangalore, Karnataka, India
| | | | | |
Collapse
|
4
|
Zhang K, Xiao X, Wang X, Fan Y, Li X. Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies. J Mater Chem B 2019; 7:7090-7109. [DOI: 10.1039/c9tb01682a] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Abstract
Topographical patterning has recently attracted lots of attention in regulating cell fate, understanding the mechanism of cell–microenvironment interactions, and solving the great issues of regenerative medicine.
Collapse
Affiliation(s)
- Ke Zhang
- Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education
- School of Biological Science and Medical Engineering
- Beihang University
- Beijing 100083
- China
| | - Xiongfu Xiao
- Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education
- School of Biological Science and Medical Engineering
- Beihang University
- Beijing 100083
- China
| | - Xiumei Wang
- State Key Laboratory of New Ceramic and Fine Processing
- Tsinghua University
- Beijing 100084
- China
| | - Yubo Fan
- Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education
- School of Biological Science and Medical Engineering
- Beihang University
- Beijing 100083
- China
| | - Xiaoming Li
- Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education
- School of Biological Science and Medical Engineering
- Beihang University
- Beijing 100083
- China
| |
Collapse
|
5
|
Chen CH, Tsai CC, Wu PT, Wang IK, Yu J, Tsai WB. Modulation of Neural Differentiation through Submicron-Grooved Topography Surface with Modified Polydopamine. ACS APPLIED BIO MATERIALS 2018; 2:205-216. [DOI: 10.1021/acsabm.8b00556] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Cheng-Hung Chen
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | - Ching-Cheng Tsai
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | - Po-Ting Wu
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | - Ing-Kae Wang
- Biomedical Technology and Device Research Laboratories, Industrial Technology Research Institute, No. 195, Chung Hsing Rd., Sec. 4, Hsinchu 310, Taiwan
| | - Jiashing Yu
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | - Wei-Bor Tsai
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| |
Collapse
|
6
|
Engineered systems to study the synergistic signaling between integrin-mediated mechanotransduction and growth factors (Review). Biointerphases 2018; 13:06D302. [DOI: 10.1116/1.5045231] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
7
|
Chen X, Fan H, Deng X, Wu L, Yi T, Gu L, Zhou C, Fan Y, Zhang X. Scaffold Structural Microenvironmental Cues to Guide Tissue Regeneration in Bone Tissue Applications. NANOMATERIALS (BASEL, SWITZERLAND) 2018; 8:E960. [PMID: 30469378 PMCID: PMC6266401 DOI: 10.3390/nano8110960] [Citation(s) in RCA: 100] [Impact Index Per Article: 16.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/19/2018] [Revised: 11/15/2018] [Accepted: 11/17/2018] [Indexed: 02/07/2023]
Abstract
In the process of bone regeneration, new bone formation is largely affected by physico-chemical cues in the surrounding microenvironment. Tissue cells reside in a complex scaffold physiological microenvironment. The scaffold should provide certain circumstance full of structural cues to enhance multipotent mesenchymal stem cell (MSC) differentiation, osteoblast growth, extracellular matrix (ECM) deposition, and subsequent new bone formation. This article reviewed advances in fabrication technology that enable the creation of biomaterials with well-defined pore structure and surface topography, which can be sensed by host tissue cells (esp., stem cells) and subsequently determine cell fates during differentiation. Three important cues, including scaffold pore structure (i.e., porosity and pore size), grain size, and surface topography were studied. These findings improve our understanding of how the mechanism scaffold microenvironmental cues guide bone tissue regeneration.
Collapse
Affiliation(s)
- Xuening Chen
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Hongyuan Fan
- Scholl of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China.
| | - Xiaowei Deng
- Department of Civil Engineering, The University of Hongkong, Pokfulam, Hongkong 999077, China.
| | - Lina Wu
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Tao Yi
- Scholl of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China.
| | - Linxia Gu
- Department of Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0526, USA.
| | - Changchun Zhou
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Yujiang Fan
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Xingdong Zhang
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu 610064, China.
| |
Collapse
|
8
|
Moussa HI, Logan M, Wong K, Rao Z, Aucoin MG, Tsui TY. Nanoscale-Textured Tantalum Surfaces for Mammalian Cell Alignment. MICROMACHINES 2018; 9:E464. [PMID: 30424397 PMCID: PMC6187670 DOI: 10.3390/mi9090464] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/12/2018] [Revised: 09/07/2018] [Accepted: 09/10/2018] [Indexed: 02/06/2023]
Abstract
Tantalum is one of the most important biomaterials used for surgical implant devices. However, little knowledge exists about how nanoscale-textured tantalum surfaces affect cell morphology. Mammalian (Vero) cell morphology on tantalum-coated comb structures was studied using high-resolution scanning electron microscopy and fluorescence microscopy. These structures contained parallel lines and trenches with equal widths in the range of 0.18 to 100 μm. Results showed that as much as 77% of adherent cell nuclei oriented within 10° of the line axes when deposited on comb structures with widths smaller than 10 μm. However, less than 20% of cells exhibited the same alignment performance on blanket tantalum films or structures with line widths larger than 50 μm. Two types of line-width-dependent cell morphology were observed. When line widths were smaller than 0.5 μm, nanometer-scale pseudopodia bridged across trench gaps without contacting the bottom surfaces. In contrast, pseudopodia structures covered the entire trench sidewalls and the trench bottom surfaces of comb structures with line-widths larger than 0.5 μm. Furthermore, results showed that when a single cell simultaneously adhered to multiple surface structures, the portion of the cell contacting each surface reflected the type of morphology observed for cells individually contacting the surfaces.
Collapse
Affiliation(s)
- Hassan I Moussa
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| | - Megan Logan
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| | - Kingsley Wong
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| | - Zheng Rao
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| | - Marc G Aucoin
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| | - Ting Y Tsui
- Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- Waterloo Institute of Nanotechnology, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
| |
Collapse
|
9
|
Khoshraftar A, Noorani B, Yazdian F, Rashedi H, Vaez Ghaemi R, Alihemmati Z, Shahmoradi S. Fabrication and evaluation of nanofibrous polyhydroxybutyrate valerate scaffolds containing hydroxyapatite particles for bone tissue engineering. INT J POLYM MATER PO 2018. [DOI: 10.1080/00914037.2017.1417283] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Alireza Khoshraftar
- Department of Biomedical Engineering, Islamic Azad University, Science and Research Branch, Yazd, Iran
| | - Behnam Noorani
- Department of Life Science Engineering, Faculty of Interdisciplinary New Science and Technologies, University of Tehran (UT), Tehran, Iran
| | - Fatemeh Yazdian
- Department of Life Science Engineering, Faculty of Interdisciplinary New Science and Technologies, University of Tehran (UT), Tehran, Iran
| | - Hamid Rashedi
- Department of Biotechnology, School of Chemical Engineering, College of Engineering, University of Tehran, Iran
| | - Roza Vaez Ghaemi
- Chemical and Biological Engineering Department, The University of British Columbia, Vancouver, Canada
| | - Zakie Alihemmati
- Department of Life Science Engineering, Faculty of Interdisciplinary New Science and Technologies, University of Tehran (UT), Tehran, Iran
| | - Saleheh Shahmoradi
- Department of Life Science Engineering, Faculty of Interdisciplinary New Science and Technologies, University of Tehran (UT), Tehran, Iran
| |
Collapse
|
10
|
Wang Z, Zhou R, Wen F, Zhang R, Ren L, Teoh SH, Hong M. Reliable laser fabrication: the quest for responsive biomaterials surface. J Mater Chem B 2018; 6:3612-3631. [DOI: 10.1039/c7tb02545a] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
This review presents current efforts in laser fabrication, focusing on the surface features of biomaterials and their biological responses; this provides insight into the engineering of bio-responsive surfaces for future medical devices.
Collapse
Affiliation(s)
- Zuyong Wang
- College of Materials Science and Engineering
- Hunan University
- Changsha 410082
- P. R. China
| | - Rui Zhou
- School of Aerospace Engineering
- Xiamen University
- Xiamen 361005
- P. R. China
| | - Feng Wen
- School of Chemical and Biomedical Engineering
- Nanyang Technological University
- Singapore 637457
- Singapore
| | - Rongkai Zhang
- The Third Affiliated Hospital of Southern Medical University
- Guangzhou 510630
- P. R. China
| | - Lei Ren
- College of Materials Science
- Xiamen University
- Xiamen 361005
- P. R. China
| | - Swee Hin Teoh
- College of Materials Science and Engineering
- Hunan University
- Changsha 410082
- P. R. China
- School of Chemical and Biomedical Engineering
| | - Minghui Hong
- School of Aerospace Engineering
- Xiamen University
- Xiamen 361005
- P. R. China
- Department of Electrical and Computer Engineering
| |
Collapse
|
11
|
Tsai CY, Lin CL, Cheng NC, Yu J. Effects of nano-grooved gelatin films on neural induction of human adipose-derived stem cells. RSC Adv 2017. [DOI: 10.1039/c7ra09020j] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The extra cellular matrix (ECM) and cell–cell interactions facilitate the survival, self-renewing and differentiation capabilities of stem cells.
Collapse
Affiliation(s)
- Chen-Yu Tsai
- Department of Chemical Engineering
- National Taiwan University
- Taipei City 106
- Taiwan
| | - Chih-Ling Lin
- Department of Chemical Engineering
- National Taiwan University
- Taipei City 106
- Taiwan
| | - Nai-Chen Cheng
- Department of Surgery
- National Taiwan University Hospital
- Taipei City 10048
- Republic of China
| | - Jiashing Yu
- Department of Chemical Engineering
- National Taiwan University
- Taipei City 106
- Taiwan
| |
Collapse
|
12
|
Wittkowske C, Reilly GC, Lacroix D, Perrault CM. In Vitro Bone Cell Models: Impact of Fluid Shear Stress on Bone Formation. Front Bioeng Biotechnol 2016; 4:87. [PMID: 27896266 PMCID: PMC5108781 DOI: 10.3389/fbioe.2016.00087] [Citation(s) in RCA: 173] [Impact Index Per Article: 21.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2016] [Accepted: 10/25/2016] [Indexed: 01/06/2023] Open
Abstract
This review describes the role of bone cells and their surrounding matrix in maintaining bone strength through the process of bone remodeling. Subsequently, this work focusses on how bone formation is guided by mechanical forces and fluid shear stress in particular. It has been demonstrated that mechanical stimulation is an important regulator of bone metabolism. Shear stress generated by interstitial fluid flow in the lacunar-canalicular network influences maintenance and healing of bone tissue. Fluid flow is primarily caused by compressive loading of bone as a result of physical activity. Changes in loading, e.g., due to extended periods of bed rest or microgravity in space are associated with altered bone remodeling and formation in vivo. In vitro, it has been reported that bone cells respond to fluid shear stress by releasing osteogenic signaling factors, such as nitric oxide, and prostaglandins. This work focusses on the application of in vitro models to study the effects of fluid flow on bone cell signaling, collagen deposition, and matrix mineralization. Particular attention is given to in vitro set-ups, which allow long-term cell culture and the application of low fluid shear stress. In addition, this review explores what mechanisms influence the orientation of collagen fibers, which determine the anisotropic properties of bone. A better understanding of these mechanisms could facilitate the design of improved tissue-engineered bone implants or more effective bone disease models.
Collapse
Affiliation(s)
- Claudia Wittkowske
- Department of Mechanical Engineering, University of Sheffield, Sheffield, UK; INSIGNEO Institute for in silico Medicine, University of Sheffield, Sheffield, UK
| | - Gwendolen C Reilly
- INSIGNEO Institute for in silico Medicine, University of Sheffield, Sheffield, UK; Department of Material Science, University of Sheffield, Sheffield, UK
| | - Damien Lacroix
- Department of Mechanical Engineering, University of Sheffield, Sheffield, UK; INSIGNEO Institute for in silico Medicine, University of Sheffield, Sheffield, UK
| | - Cecile M Perrault
- Department of Mechanical Engineering, University of Sheffield, Sheffield, UK; INSIGNEO Institute for in silico Medicine, University of Sheffield, Sheffield, UK
| |
Collapse
|
13
|
Li Z, Wen J, Jia W, Ding S, Xia X, Zhou C, Huang Y. Bio-inspired cell membrane ingredient cholesterol-conjugated chitosan as a potential material for bone tissue repair. Chem Res Chin Univ 2016. [DOI: 10.1007/s40242-016-5510-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
14
|
Azeem A, English A, Kumar P, Satyam A, Biggs M, Jones E, Tripathi B, Basu N, Henkel J, Vaquette C, Rooney N, Riley G, O'Riordan A, Cross G, Ivanovski S, Hutmacher D, Pandit A, Zeugolis D. The influence of anisotropic nano- to micro-topography on in vitro and in vivo osteogenesis. Nanomedicine (Lond) 2016; 10:693-711. [PMID: 25816874 DOI: 10.2217/nnm.14.218] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
Abstract
AIM Topographically modified substrates are increasingly used in tissue engineering to enhance biomimicry. The overarching hypothesis is that topographical cues will control cellular response at the cell-substrate interface. MATERIALS & METHODS The influence of anisotropically ordered poly(lactic-co-glycolic acid) substrates (constant groove width of ~1860 nm; constant line width of ~2220 nm; variable groove depth of ~35, 306 and 2046 nm) on in vitro and in vivo osteogenesis were assessed. RESULTS & DISCUSSION We demonstrate that substrates with groove depths of approximately 306 and 2046 nm promote osteoblast alignment parallel to underlined topography in vitro. However, none of the topographies assessed promoted directional osteogenesis in vivo. CONCLUSION 2D imprinting technologies are useful tools for in vitro cell phenotype maintenance.
Collapse
Affiliation(s)
- Ayesha Azeem
- Network of Excellence for Functional Biomaterials (NFB), Biosciences Building, National University of Ireland Galway (NUI Galway), Galway, Ireland
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
15
|
Zhang Y, Du X, Hu D, Zhang J, Zhou Y, Min G, Lang M. Combined Chemical Groups and Topographical Nanopattern on the Poly(ε-Caprolactone) Surface for Regulating Human Foreskin Fibroblasts Behavior. ACS APPLIED MATERIALS & INTERFACES 2016; 8:7720-7728. [PMID: 26950754 DOI: 10.1021/acsami.6b01361] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Surface chemistry and substrate topography could contribute significantly to providing a biochemical and topographical cues for governing the fate of cells on the cell-material interface. However, the synergies between these two properties have not been exploited extensively for biomaterial design. Herein, we achieved spatial-controlled patterning of chemical groups on the poly(ε-caprolactone) (PCL) surface by elegant UV-nanoimprint lithography (UN-NIL). The introduction of chemical groups on the PCL surface was developed by our newly 6-benzyloxycarbonylmethyl-ε-caprolactone (BCL) monomer, which not only solved the lack of functional groups along the PCL chain but also retained the original favorable properties of PCL materials. The synergetic effect of the chemical groups and nanopatterns on the human foreskin fibroblasts (HFFs) behaviors was evaluated in detail. The results revealed that the patterned functional PCL surfaces could induce enhanced cell adhesion and proliferation, further trigger changes in HFFs morphology, orientation and collagen secretion. Taken together, this study provided a method for straightforward fabrication of reactive PCL surfaces with topographic patterns by one-step process, and they would facilitate PCL as potential candidate for cell cultivation and tissue engineering.
Collapse
Affiliation(s)
- Yan Zhang
- Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology , No 130, Meilong Road, Shanghai, 200237, China
- Shanghai Nanotechnology Promotion Center , Shanghai, 200237, China
| | - Xiaolin Du
- Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology , No 130, Meilong Road, Shanghai, 200237, China
| | - Dan Hu
- The State Key Laboratory of Bioreactor Engineering, School of Bioengineering, East China University of Science and Technology , Shanghai, 200237, China
| | - Jing Zhang
- Shanghai Nanotechnology Promotion Center , Shanghai, 200237, China
| | - Yan Zhou
- The State Key Laboratory of Bioreactor Engineering, School of Bioengineering, East China University of Science and Technology , Shanghai, 200237, China
| | - Guoquan Min
- Shanghai Nanotechnology Promotion Center , Shanghai, 200237, China
| | - Meidong Lang
- Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology , No 130, Meilong Road, Shanghai, 200237, China
| |
Collapse
|
16
|
Response of MG63 osteoblast-like cells to ordered nanotopographies fabricated using colloidal self-assembly and glancing angle deposition. Biointerphases 2015; 10:04A306. [DOI: 10.1116/1.4931889] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
17
|
Different surface sensing of the cell body and nucleus in healthy primary cells and in a cancerous cell line on nanogrooves. Biointerphases 2015; 10:031004. [DOI: 10.1116/1.4927556] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
|
18
|
Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells. Biomaterials 2015; 62:58-65. [PMID: 26022980 DOI: 10.1016/j.biomaterials.2015.05.026] [Citation(s) in RCA: 32] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2015] [Revised: 05/12/2015] [Accepted: 05/16/2015] [Indexed: 11/22/2022]
Abstract
Topographical features on the nanometer scale are known to influence cellular behavior. The response of specific cell types to various types of surface structures is currently still being investigated. Alumina ceramics play an important role as biomaterials, e.g., in medical and dental applications. In this study, we investigated the influence of nanoscale surface features with low aspect ratio (< 0.1) on the response of osteoblast-like MG-63 cells. To this end, low-energy ion irradiation was employed to produce shallow nanoscale ripple patterns on Al2O3(0001) surfaces with lateral periodicities of 24 nm and 179 nm and heights of only 0.7 and 11.5 nm, respectively. The nanopatterning was found to increase the proliferation of MG-63 cells and may lead to pseudopodia alignment along the ripples. Furthermore, focal adhesion behavior and cell morphology were analyzed. We found that MG-63 cells are able to recognize surface nanopatterns with extremely low vertical variations of less than 1 nm. In conclusion, it is shown that surface topography in the sub-nm range significantly influences the response of osteoblast-like cells.
Collapse
|
19
|
Iuliano JN, Kutscha PD, Biderman NJ, Subbaram S, Groves TR, Tenenbaum SA, Hempel N. Metastatic bladder cancer cells distinctively sense and respond to physical cues of collagen fibril-mimetic nanotopography. Exp Biol Med (Maywood) 2014; 240:601-10. [PMID: 25465204 DOI: 10.1177/1535370214560973] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2014] [Accepted: 10/08/2014] [Indexed: 01/17/2023] Open
Abstract
Tumor metastasis is characterized by enhanced invasiveness and migration of tumor cells through the extracellular matrix (ECM), resulting in extravasation into the blood and lymph and colonization at secondary sites. The ECM provides a physical scaffold consisting of components such as collagen fibrils, which have distinct dimensions at the nanoscale. In addition to the interaction of peptide moieties with tumor cell integrin clusters, the ECM provides a physical guide for tumor cell migration. Using nanolithography we set out to mimic the physical dimensions of collagen fibrils using lined nanotopographical silicon surfaces and to explore whether metastatic tumor cells are uniquely able to respond to these physical dimensions. Etched silicon surfaces containing nanoscale lined patterns with varying trench and ridge sizes (65-500 nm) were evaluated for their ability to distinguish between a non-metastatic (253 J) and a highly metastatic (253 J-BV) derivative bladder cancer cell line. Enhanced alignment was distinctively observed for the metastatic cell lines on feature sizes that mimic the dimensions of collagen fibrils (65-100 nm lines, 1:1-1:1.5 pitch). Further, these sub-100 nm lines acted as guides for migration of metastatic cancer cells. Interestingly, even at this subcellular scale, metastatic cell migration was abrogated when cells were forced to move perpendicular to these lines. Compared to flat surfaces, 65 nm lines enhanced the formation of actin stress fibers and filopodia of metastatic cells. This was accompanied by increased formation of focal contacts, visualized by immunofluorescent staining of phospho-focal adhesion kinase along the protruding lamellipodia. Simple lined nanotopography appears to be an informative platform for studying the physical cues of the ECM in a pseudo-3D format and likely mimics physical aspects of collagen fibrils. Metastatic cancer cells appear distinctively well adapted to sense these features using filopodia protrusions to enhance their alignment and migration.
Collapse
Affiliation(s)
- James N Iuliano
- Nanobioscience Constellation, College of Nanoscale Science, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA University at Albany, State University of New York, Albany, NY 12203, USA
| | - Paul D Kutscha
- Nanobioscience Constellation, College of Nanoscale Science, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA University at Albany, State University of New York, Albany, NY 12203, USA
| | - N J Biderman
- Nanoengineering Constellation, College of Nanoscale Engineering, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA University at Albany, State University of New York, Albany, NY 12203, USA
| | - Sita Subbaram
- Center for Cell Biology and Cancer Research, Albany Medical College, Albany, NY 12209, USA
| | - Timothy R Groves
- Nanoengineering Constellation, College of Nanoscale Engineering, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA
| | - Scott A Tenenbaum
- Nanobioscience Constellation, College of Nanoscale Science, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA
| | - Nadine Hempel
- Nanobioscience Constellation, College of Nanoscale Science, SUNY Polytechnic Institute, State University of New York, Albany, NY 12203, USA
| |
Collapse
|
20
|
Jeon H, Lee H, Kim G. A surface-modified poly(ɛ-caprolactone) scaffold comprising variable nanosized surface-roughness using a plasma treatment. Tissue Eng Part C Methods 2014; 20:951-63. [PMID: 24635019 PMCID: PMC4241869 DOI: 10.1089/ten.tec.2013.0701] [Citation(s) in RCA: 53] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2013] [Accepted: 03/10/2014] [Indexed: 01/06/2023] Open
Abstract
Melt-plotted poly (ɛ-caprolactone) (PCL) has been widely applied in various tissue regenerations. However, its hydrophobic nature has hindered its usage in wider tissue engineering applications. In this study, we present the development of a porous and multilayered PCL scaffold, which shows outstanding hydrophilic properties and has a roughened surface consisting of homogeneously distributed nanosized pits. The scaffold was obtained using an innovative oxygen plasma treatment. This technology can induce variable nanoscale surface roughness, which is difficult from traditional plasma treatment. Osteoblast-like cells were cultured on the scaffolds and several cellular responses (cell viability, fluorescence images [live/dead cells, nucleus, and actin cytoskeleton], ALP activity, and calcium mineralization) were assessed for untreated PCL and conventionally plasma-treated PCL scaffolds. The data indicated that an appropriate roughness (654 ± 91 nm) of the PCL scaffold processed with the new plasma treatment induced more advantageous responses for the cells, compared with untreated scaffolds and traditional plasma-treated scaffolds.
Collapse
Affiliation(s)
- HoJun Jeon
- Department of Bio-Mechatronic Engineering, College of Biotechnology and Bioengineering, Sungkyunkwan University , Suwon, South Korea
| | | | | |
Collapse
|
21
|
Barthes J, Özçelik H, Hindié M, Ndreu-Halili A, Hasan A, Vrana NE. Cell microenvironment engineering and monitoring for tissue engineering and regenerative medicine: the recent advances. BIOMED RESEARCH INTERNATIONAL 2014; 2014:921905. [PMID: 25143954 PMCID: PMC4124711 DOI: 10.1155/2014/921905] [Citation(s) in RCA: 133] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/23/2014] [Accepted: 06/15/2014] [Indexed: 01/01/2023]
Abstract
In tissue engineering and regenerative medicine, the conditions in the immediate vicinity of the cells have a direct effect on cells' behaviour and subsequently on clinical outcomes. Physical, chemical, and biological control of cell microenvironment are of crucial importance for the ability to direct and control cell behaviour in 3-dimensional tissue engineering scaffolds spatially and temporally. In this review, we will focus on the different aspects of cell microenvironment such as surface micro-, nanotopography, extracellular matrix composition and distribution, controlled release of soluble factors, and mechanical stress/strain conditions and how these aspects and their interactions can be used to achieve a higher degree of control over cellular activities. The effect of these parameters on the cellular behaviour within tissue engineering context is discussed and how these parameters are used to develop engineered tissues is elaborated. Also, recent techniques developed for the monitoring of the cell microenvironment in vitro and in vivo are reviewed, together with recent tissue engineering applications where the control of cell microenvironment has been exploited. Cell microenvironment engineering and monitoring are crucial parts of tissue engineering efforts and systems which utilize different components of the cell microenvironment simultaneously can provide more functional engineered tissues in the near future.
Collapse
Affiliation(s)
- Julien Barthes
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
| | - Hayriye Özçelik
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
| | - Mathilde Hindié
- Equipe de Recherche sur les Relations Matrice Extracellulaire-Cellules, Université de Cergy-Pontoise, 2 Avenue Adolphe Chauvin, 95302 Cergy Pontoise, France
| | | | - Anwarul Hasan
- Biomedical Engineering and Department of Mechanical Engineering, American University of Beirut, Beirut 1107 2020, Lebanon
- Center for Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
| | - Nihal Engin Vrana
- Institut National de la Santé et de la Recherche Médicale (INSERM) UMR-S 1121, “Biomatériaux et Bioingénierie”, 11 rue Humann, 67085 Strasbourg Cedex, France
- Protip SAS, 8 Place de l'Hôpital, 67000, Strasbourg, France
| |
Collapse
|
22
|
Prittinen J, Jiang Y, Ylärinne JH, Pakkanen TA, Lammi MJ, Qu C. Chondrocyte behavior on nanostructured micropillar polypropylene and polystyrene surfaces. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2014; 43:424-31. [PMID: 25175232 DOI: 10.1016/j.msec.2014.07.045] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Subscribe] [Scholar Register] [Received: 04/17/2014] [Revised: 06/27/2014] [Accepted: 07/13/2014] [Indexed: 01/26/2023]
Abstract
This study was aimed to investigate whether patterned polypropylene (PP) or polystyrene (PS) could enhance the chondrocytes' extracellular matrix (ECM) production and phenotype maintenance. Bovine primary chondrocytes were cultured on smooth PP and PS, as well as on nanostructured micropillar PP (patterned PP) and PS (patterned PS) for 2 weeks. Subsequently, the samples were collected for fluorescein diacetate-based cell viability tests, for immunocytochemical assays of types I and II collagen, actin and vinculin, for scanning electronic microscopic analysis of cell morphology and distribution, and for gene expression assays of Sox9, aggrecan, procollagen α1(II), procollagen α1(X), and procollagen α2(I) using quantitative RT-PCR assays. After two weeks of culture, the bovine primary chondrocytes had attached on both patterned PP and PS, while practically no adhesion was observed on smooth PP. However, the best adhesion of the cells was on smooth PS. The cells, which attached on patterned PP and PS surfaces synthesized types I and II collagen. The chondrocytes' morphology was extended, and an abundant ECM network formed around the attached chondrocytes on both patterned PP and PS. Upon passaging, no significant differences on the chondrocyte-specific gene expression were observed, although the highest expression level of aggrecan was observed on the patterned PS in passage 1 chondrocytes, and the expression level of procollagen α1(II) appeared to decrease in passaged chondrocytes. However, the expressions of procollagen α2(I) were increased in all passaged cell cultures. In conclusion, the bovine primary chondrocytes could be grown on patterned PS and PP surfaces, and they produced extracellular matrix network around the adhered cells. However, neither the patterned PS nor PP could prevent the dedifferentiation of chondrocytes.
Collapse
Affiliation(s)
- Juha Prittinen
- Department of Applied Physics, University of Eastern Finland, Kuopio, Finland
| | - Yu Jiang
- Department of Chemistry, University of Eastern Finland, Joensuu, Finland
| | - Janne H Ylärinne
- Department of Applied Physics, University of Eastern Finland, Kuopio, Finland
| | - Tapani A Pakkanen
- Department of Chemistry, University of Eastern Finland, Joensuu, Finland
| | - Mikko J Lammi
- Department of Applied Physics, University of Eastern Finland, Kuopio, Finland.
| | - Chengjuan Qu
- Department of Applied Physics, University of Eastern Finland, Kuopio, Finland
| |
Collapse
|
23
|
Yu J, Lee AR, Lin WH, Lin CW, Wu YK, Tsai WB. Electrospun PLGA fibers incorporated with functionalized biomolecules for cardiac tissue engineering. Tissue Eng Part A 2014; 20:1896-907. [PMID: 24471778 PMCID: PMC4086675 DOI: 10.1089/ten.tea.2013.0008] [Citation(s) in RCA: 77] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2013] [Accepted: 01/14/2014] [Indexed: 11/12/2022] Open
Abstract
Structural similarity of electrospun fibers (ESFs) to the native extracellular matrix provides great potential for the application of biofunctional ESFs in tissue engineering. This study aimed to synthesize biofunctionalized poly (L-lactide-co-glycolide) (PLGA) ESFs for investigating the potential for cardiac tissue engineering application. We developed a simple but novel strategy to incorporate adhesive peptides in PLGA ESFs. Two adhesive peptides derived from laminin, YIGSR, and RGD, were covalently conjugated to poly-L-lysine, and then mingled with PLGA solution for electrospinning. Peptides were uniformly distributed on the surface and in the interior of ESFs. PLGA ESFs incorporated with YIGSR or RGD or adsorbed with laminin significantly enhanced the adhesion of cardiomyocytes isolated from neonatal rats. Furthermore, the cells were found to adhere better on ESFs compared with flat substrates after 7 days of culture. Immunofluorescent staining of F-actin, vinculin, a-actinin, and N-cadherin indicated that cardiomyocytes adhered and formed striated α-actinin better on the laminin-coated ESFs and the YIGSR-incorporated ESFs compared with the RGD-incorporated ESFs. The expression of α-myosin heavy chain and β-tubulin on the YIGSR-incorporated ESFs was significantly higher compared with the expression level on PLGA and RGD-incorporated samples. Furthermore, the contraction of cardiomyocytes was faster and lasted longer on the laminin-coated ESFs and YIGSR-incorporated ESFs. The results suggest that aligned YIGSR-incorporated PLGA ESFs is a better candidate for the formation of cardiac patches. This study demonstrated the potential of using peptide-incorporated ESFs as designable-scaffold platform for tissue engineering.
Collapse
Affiliation(s)
- Jiashing Yu
- Department of Chemical Engineering, National Taiwan University , Taipei, Taiwan
| | | | | | | | | | | |
Collapse
|
24
|
Fu SW, Chien HW, Tsai WB. Fabrication of poly(N-isopropylacrylamide) films containing submicrometer grooves for constructing aligned cell sheets. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:14351-14355. [PMID: 24206434 DOI: 10.1021/la403129c] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Transplantation of cell sheets including an intact extracellular matrix is one tissue-engineering strategy for tissue regeneration. Temperature-responsive substrates based on poly(N-isopropylacrylamide) (PNIPAAm) have been used to harvest intact cell sheets by temperature change. In this work, we immobilized PNIPAAm on plastic substrates by a UV-activated azide-based cross-linking mechanism. We demonstrated that the UV-cross-linked PNIPAAm films could respond to temperature changes and be used for cell-sheet fabrication. Next, grooved PNIPAAm substrates were fabricated by imprinting from grooved poly(dimethylsiloxane) (PDMS) molds (800 nm in groove width and 500 nm in depth). C2C12 cells formed aligned cell sheets on the grooved PNIPAAm surface. The aligned cell sheet could be transferred to a gelatin substrate without losing cell alignment. We expect that this simple time-saving technique for the fabrication of grooved PNIPAAm substrates will benefit from the application of cellular alignment in tissue-engineering products.
Collapse
Affiliation(s)
- Szu-Wei Fu
- Department of Chemical Engineering, National Taiwan University , Taipei 106, Taiwan
| | | | | |
Collapse
|
25
|
Grooved PLGA films incorporated with RGD/YIGSR peptides for potential application on skeletal muscle tissue engineering. Colloids Surf B Biointerfaces 2013; 110:88-95. [DOI: 10.1016/j.colsurfb.2013.04.016] [Citation(s) in RCA: 42] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2013] [Revised: 04/11/2013] [Accepted: 04/18/2013] [Indexed: 10/26/2022]
|
26
|
Laser Induced Nitrogen Enhanced Titanium Surfaces for Improved Osseo-Integration. Ann Biomed Eng 2013; 42:50-61. [DOI: 10.1007/s10439-013-0898-z] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2013] [Accepted: 08/14/2013] [Indexed: 10/26/2022]
|
27
|
Li JY, Ho YC, Chung YC, Lin FC, Liao WL, Tsai WB. Preparation of micron/submicron hybrid patterns via a two-stage UV-imprint technique and their dimensional effects on cell adhesion and alignment. Biofabrication 2013; 5:035003. [PMID: 23714853 DOI: 10.1088/1758-5082/5/3/035003] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Cell adhesion, movement and proliferation on a biomaterial have been broadly explored and known to be induced by the morphology and structure of material surfaces. In order to explore the effects of hybrid structures (combination of micro- and nanofeatures on a pattern) on cell adhesion and alignment, a micro-featured mold was firstly prepared using partial UV-irradiation and the protruding top of the mold was then imprinted with nano-featured templates via successive UV irradiation. An oxygen inhibition effect was utilized in the course of UV curing and a two-step molding process, to form multiscale hybrid structures. The poly(dimethyl siloxane) (PDMS) replica of the hybrid mold was manufactured and employed to fabricate hybrid polymeric patterns for cell attachment. The underlying micro-feature was chosen to be a 25-µm-wide pattern and the nanostructures on the protrusions of the micropattern were different ruled nanogrooves, either parallel or perpendicular to the micro-featured pattern. In cell attachment measurement, 3T3 fibroblasts attached to poly(methyl methacrylate) (PMMA) samples seemed to be preferentially located on the recessed area of the hybrid patterns; however, 3T3 fibroblasts were aligned with nano-features, no matter if the nanogrooves were parallel or perpendicular to the micro-featured patterns. The nanogroove size was found to determine the effectiveness of cell alignment.
Collapse
Affiliation(s)
- J-Y Li
- Department of Chemical and materials Engineering, National University of Kaohsiung, #700, Kaohsiung University Rd., Nan-Tsu District, Kaohsiung 811, Taiwan, Republic of China
| | | | | | | | | | | |
Collapse
|
28
|
Le X, Poinern GEJ, Ali N, Berry CM, Fawcett D. Engineering a biocompatible scaffold with either micrometre or nanometre scale surface topography for promoting protein adsorption and cellular response. Int J Biomater 2013; 2013:782549. [PMID: 23533416 PMCID: PMC3600176 DOI: 10.1155/2013/782549] [Citation(s) in RCA: 50] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/12/2012] [Revised: 11/02/2012] [Accepted: 12/13/2012] [Indexed: 11/18/2022] Open
Abstract
Surface topographical features on biomaterials, both at the submicrometre and nanometre scales, are known to influence the physicochemical interactions between biological processes involving proteins and cells. The nanometre-structured surface features tend to resemble the extracellular matrix, the natural environment in which cells live, communicate, and work together. It is believed that by engineering a well-defined nanometre scale surface topography, it should be possible to induce appropriate surface signals that can be used to manipulate cell function in a similar manner to the extracellular matrix. Therefore, there is a need to investigate, understand, and ultimately have the ability to produce tailor-made nanometre scale surface topographies with suitable surface chemistry to promote favourable biological interactions similar to those of the extracellular matrix. Recent advances in nanoscience and nanotechnology have produced many new nanomaterials and numerous manufacturing techniques that have the potential to significantly improve several fields such as biological sensing, cell culture technology, surgical implants, and medical devices. For these fields to progress, there is a definite need to develop a detailed understanding of the interaction between biological systems and fabricated surface structures at both the micrometre and nanometre scales.
Collapse
Affiliation(s)
- Xuan Le
- Murdoch Applied Nanotechnology Research Group, Department of Physics, Energy Studies and Nanotechnology, School of Engineering and Energy, Murdoch University, Murdoch, WA 6150, Australia
| | - Gérrard Eddy Jai Poinern
- Murdoch Applied Nanotechnology Research Group, Department of Physics, Energy Studies and Nanotechnology, School of Engineering and Energy, Murdoch University, Murdoch, WA 6150, Australia
| | - Nurshahidah Ali
- Murdoch Applied Nanotechnology Research Group, Department of Physics, Energy Studies and Nanotechnology, School of Engineering and Energy, Murdoch University, Murdoch, WA 6150, Australia
| | - Cassandra M. Berry
- Division of Health Sciences, School of Veterinary and Biomedical Sciences, Murdoch University, Murdoch, WA 6150, Australia
| | - Derek Fawcett
- Murdoch Applied Nanotechnology Research Group, Department of Physics, Energy Studies and Nanotechnology, School of Engineering and Energy, Murdoch University, Murdoch, WA 6150, Australia
| |
Collapse
|
29
|
Klymov A, Prodanov L, Lamers E, Jansen JA, Walboomers XF. Understanding the role of nano-topography on the surface of a bone-implant. Biomater Sci 2013; 1:135-151. [DOI: 10.1039/c2bm00032f] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|
30
|
Koegler P, Clayton A, Thissen H, Santos GNC, Kingshott P. The influence of nanostructured materials on biointerfacial interactions. Adv Drug Deliv Rev 2012; 64:1820-39. [PMID: 22705547 DOI: 10.1016/j.addr.2012.06.001] [Citation(s) in RCA: 97] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2012] [Revised: 05/29/2012] [Accepted: 06/07/2012] [Indexed: 01/08/2023]
Abstract
Control over biointerfacial interactions in vitro and in vivo is the key to many biomedical applications: from cell culture and diagnostic tools to drug delivery, biomaterials and regenerative medicine. The increasing use of nanostructured materials is placing a greater demand on improving our understanding of how these new materials influence biointerfacial interactions, including protein adsorption and subsequent cellular responses. A range of nanoscale material properties influence these interactions, and material toxicity. The ability to manipulate both material nanochemistry and nanotopography remains challenging in its own right, however, a more in-depth knowledge of the subsequent biological responses to these new materials must occur simultaneously if they are ever to be affective in the clinic. We highlight some of the key technologies used for fabrication of nanostructured materials, examine how nanostructured materials influence the behavior of proteins and cells at surfaces and provide details of important analytical techniques used in this context.
Collapse
Affiliation(s)
- Peter Koegler
- Industrial Research Institute Swinburne, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia
| | | | | | | | | |
Collapse
|
31
|
Wang PY, Li WT, Yu J, Tsai WB. Modulation of osteogenic, adipogenic and myogenic differentiation of mesenchymal stem cells by submicron grooved topography. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2012; 23:3015-3028. [PMID: 22903603 DOI: 10.1007/s10856-012-4748-6] [Citation(s) in RCA: 60] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2012] [Accepted: 08/08/2012] [Indexed: 06/01/2023]
Abstract
Topographic cues have been recognized crucial on the modulation of cell behavior, and subsequent important for the design of implants, cell-based biomedical devices and tissue-engineered products. Grooved topography direct cells to align anisotropically on the substrates, resulting in an obvious morphological difference compared with the flat and the other topographies. This study aimed at investigating the effects of grooved topography on the differentiation of mesenchymal stem cells (MSCs) into osteoblasts, adipocytes and myoblasts. A series of submicron-grooved polystyrene substrates with equal groove-to-ridge ratio but different width and depth (width/depth (nm): 450/100, 450/350, 900/100, and 900/550) were fabricated based on electron beam lithography and soft lithography techniques. Primary rat MSCs (rMSCs) were cultured on these substrates without induction for differentiation for 6 days, and then subjected to induction for osteogenesis, adipogenesis and myogenesis. While the alignment of rMSCs strongly complied with the direction of the grooves and increased with groove depths, cell attachment on day 1 (~1.5 × 10(4)/cm(2)) and cell proliferation after 6 days of culture (~5 × 10(4)/cm(2)) were not significantly affected by substrate types. Osteogenesis, indicated by alkaline phosphatase activities and calcium deposit, was not significantly modulated by the grooved substrates, compared with the flat control, suggesting that cell alignment may not determine osteoinduction of rMSCs. On the other hand, adipogenesis, indicated by lipid production, was significantly enhanced by the grooved substrates compared with the flat surface (P < 0.001). On the other hand, myogenesis, indicated by desmin and MHC staining, was enhanced by the grooves in a time- and groove size-dependent manner compared with the flat control. The results suggested that grooved topography has an in-depth potential for modulating the commitment of the stem cell lineages, which could benefit the development of advanced biomaterials for biomedical applications.
Collapse
Affiliation(s)
- Peng-Yuan Wang
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei, 106, Taiwan
| | | | | | | |
Collapse
|
32
|
Wang PY, Wu TH, Chao PHG, Kuo WH, Wang MJ, Hsu CC, Tsai WB. Modulation of cell attachment and collagen production of anterior cruciate ligament cells via submicron grooves/ridges structures with different cell affinity. Biotechnol Bioeng 2012; 110:327-37. [PMID: 22833331 DOI: 10.1002/bit.24615] [Citation(s) in RCA: 29] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2012] [Revised: 07/13/2012] [Accepted: 07/17/2012] [Indexed: 01/06/2023]
Abstract
This study aimed to investigate the effects of submicron-grooved topography and surface cell affinity on the attachment, proliferation and collagen synthesis of anterior cruciate ligament (ACL) cells. Two grooved polystyrene (PS) surfaces (equal groove/ridge width of 800 nm) with a groove depth of 100 or 700 nm were fabricated and modified by oxygen plasma treatment, dopamine deposition and conjugation of RGD-containing peptides to enhance cell affinity. The elongation and alignment of ACL cells was enhanced by grooved structures with increasing groove depths regardless of surface chemistry. On the other hand, cell spreading and proliferation mainly depended on surface chemistry, in accordance with surface cell affinity: O(2) plasma < dopamine deposition < RGD conjugation. The synthesis of type I collagen was the highest by the ACL cells cultured on the 700 nm grooved surface conjugated with RGD peptides, indicating that both surface grooved topography and chemistry play a role in modulating collagen production of ACL cells. Furthermore, the type I collagen deposited on the 700 nm PS surface was aligned with grooves/ridges. Our results indicated that both ligand presentation and cell alignment are important in the physiological activities of ACL fibroblasts. Such information is critical for design of biomaterials for ACL tissue engineering.
Collapse
Affiliation(s)
- Peng-Yuan Wang
- Department of Chemical Engineering, National Taiwan University, No 1, Roosevelt Road, Sec 4, Taipei 106, Taiwan
| | | | | | | | | | | | | |
Collapse
|
33
|
Im BJ, Lee SW, Oh N, Lee MH, Kang JH, Leesungbok R, Lee SC, Ahn SJ, Park JS. Texture direction of combined microgrooves and submicroscale topographies of titanium substrata influence adhesion, proliferation, and differentiation in human primary cells. Arch Oral Biol 2012; 57:898-905. [DOI: 10.1016/j.archoralbio.2011.11.013] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2011] [Revised: 11/14/2011] [Accepted: 11/16/2011] [Indexed: 12/25/2022]
|
34
|
Ventre M, Causa F, Netti PA. Determinants of cell-material crosstalk at the interface: towards engineering of cell instructive materials. J R Soc Interface 2012; 9:2017-32. [PMID: 22753785 DOI: 10.1098/rsif.2012.0308] [Citation(s) in RCA: 132] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023] Open
Abstract
The development of novel biomaterials able to control cell activities and direct their fate is warranted for engineering functional biological tissues, advanced cell culture systems, single-cell diagnosis as well as for cell sorting and differentiation. It is well established that crosstalk at the cell-material interface occurs and this has a profound influence on cell behaviour. However, the complete deciphering of the cell-material communication code is still far away. A variety of material surface properties have been reported to affect the strength and the nature of the cell-material interactions, including biological cues, topography and mechanical properties. Novel experimental evidence bears out the hypothesis that these three different signals participate in the same material-cytoskeleton crosstalk pathway via adhesion plaque formation dynamics. In this review, we present the relevant findings on material-induced cell response along with the description of cell behaviour when exposed to arrays of signals-biochemical, topographical and mechanical. Finally, with the aid of literature data, we attempt to draw unifying elements of the material-cytoskeleton-cell fate chain.
Collapse
Affiliation(s)
- Maurizio Ventre
- Center for Advanced Biomaterials for Health Care@CRIB, Istituto Italiano di Tecnologia and Interdisciplinary Research Center on Biomaterials, University of Naples Federico II, Napoli, Italy
| | | | | |
Collapse
|
35
|
Matschegewski C, Staehlke S, Birkholz H, Lange R, Beck U, Engel K, Nebe JB. Automatic Actin Filament Quantification of Osteoblasts and Their Morphometric Analysis on Microtextured Silicon-Titanium Arrays. MATERIALS 2012. [PMCID: PMC5448894 DOI: 10.3390/ma5071176] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Abstract
Microtexturing of implant surfaces is of major relevance in the endeavor to improve biorelevant implant designs. In order to elucidate the role of biomaterial’s topography on cell physiology, obtaining quantitative correlations between cellular behavior and distinct microarchitectural properties is in great demand. Until now, the microscopically observed reorganization of the cytoskeleton on structured biomaterials has been difficult to convert into data. We used geometrically microtextured silicon-titanium arrays as a model system. Samples were prepared by deep reactive-ion etching of silicon wafers, resulting in rectangular grooves (width and height: 2 µm) and cubic pillars (pillar dimensions: 2 × 2 × 5 and 5 × 5 × 5 µm); finally sputter-coated with 100 nm titanium. We focused on the morphometric analysis of MG-63 osteoblasts, including a quantification of the actin cytoskeleton. By means of our novel software FilaQuant, especially developed for automatic actin filament recognition, we were first able to quantify the alterations of the actin network dependent on the microtexture of a material surface. The cells’ actin fibers were significantly reduced in length on the pillared surfaces versus the grooved array (4–5 fold) and completely reorganized on the micropillars, but without altering the orientation of cells. Our morpho-functional approach opens new possibilities for the data correlation of cell-material interactions.
Collapse
Affiliation(s)
- Claudia Matschegewski
- Biomedical Research Center, Department of Cell Biology, University of Rostock, Schillingallee 69, 18057 Rostock, Germany; E-Mails: (C.M.); (S.S.)
| | - Susanne Staehlke
- Biomedical Research Center, Department of Cell Biology, University of Rostock, Schillingallee 69, 18057 Rostock, Germany; E-Mails: (C.M.); (S.S.)
| | - Harald Birkholz
- Institute of Mathematics, University of Rostock, Ulmenstrasse 69, 18057 Rostock, Germany; E-Mails: (H.B.); (K.E.)
| | - Regina Lange
- Department of Electrical Engineering and Informatics, University of Rostock, A.-Einstein-Strasse 2, 18059 Rostock, Germany; E-Mails: (R.L.); (U.B.)
| | - Ulrich Beck
- Department of Electrical Engineering and Informatics, University of Rostock, A.-Einstein-Strasse 2, 18059 Rostock, Germany; E-Mails: (R.L.); (U.B.)
| | - Konrad Engel
- Institute of Mathematics, University of Rostock, Ulmenstrasse 69, 18057 Rostock, Germany; E-Mails: (H.B.); (K.E.)
| | - J. Barbara Nebe
- Biomedical Research Center, Department of Cell Biology, University of Rostock, Schillingallee 69, 18057 Rostock, Germany; E-Mails: (C.M.); (S.S.)
- Author to whom correspondence should be addressed; E-Mail: ; Tel.: +49-381-494-7771; Fax: +49-381-494-7764
| |
Collapse
|
36
|
Wang K, Cai L, Zhang L, Dong J, Wang S. Biodegradable photo-crosslinked polymer substrates with concentric microgrooves for regulating MC3T3-E1 cell behavior. Adv Healthc Mater 2012. [PMID: 23184743 DOI: 10.1002/adhm.201200030] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Both intrinsic material properties and topographical features are critical in influencing cell-biomaterial interactions. We present a systematic investigation of regulating mouse pre-osteoblastic MC3T3-E1 cell behavior on biodegradable polymer substrates with distinct mechanical properties and concentric microgrooves. The precursors for fabricating substrates used here were two poly(ϵ-caprolactone) triacrylates (PCLTAs) synthesized from poly(ϵ-caprolactone) triols with molecular weights of ∼7000 and ∼10000 g mol(-1) . These two PCLTAs were photo-crosslinked into PCL networks with distinct thermal, rheological, and mechanical properties at physiological temperature because of their different crystallinities and melting temperatures. Microgrooved substrates with four groove widths of 7.5, 16.1, 44.2, and 91.2 μm and three groove depths of 0.2, 1, and 10 μm were prepared through replica molding, i.e., photo-crosslinking PCLTA on micro-fabricated silicon wafers with pre-designed concentric groove patterns. MC3T3-E1 cell attachment and proliferation could be better supported by the stiffer substrates while not significantly influenced by the microgrooves. Microgroove dimensions could regulate MC3T3-E1 cell alignment, nuclear shape and distribution, mineralization, and gene expression. Among the microgrooves with a fixed depth of 10 μm, the smallest width of 7.5 μm could align and elongate the cytoskeleton and nuclei most efficiently. Strikingly, higher mineral deposition and upregulation of osteocalcin gene expression were found in the narrower microgrooves when the groove depth was 10 μm.
Collapse
Affiliation(s)
- Kan Wang
- Department of Materials Science and Engineering, The University of Tennessee, Knoxville, TN 37996, USA
| | | | | | | | | |
Collapse
|
37
|
Nanostructured material surfaces--preparation, effect on cellular behavior, and potential biomedical applications: a review. Int J Artif Organs 2012; 34:963-85. [PMID: 22161281 DOI: 10.5301/ijao.5000012] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/30/2011] [Indexed: 12/14/2022]
Abstract
Nanostructures play important roles in vivo, where nanoscaled features of extracellular matrix (ECM) components influence cell behavior and resultant tissue formation. This review summarizes some of the recent developments in fostering new concepts and approaches to nanofabrication, such as top-down and bottom-up and combinations of the two. As in vitro investigations demonstrate that man-made nanotopography can be used to control cell reactions to a material surface, its potential application in implant design and tissue engineering becomes increasingly evident. Therefore, we present recent progress in directing cell fate in the field of cell mechanics, which has grown rapidly over the last few years, and in various tissue-engineering applications. The main focus is on the initial responses of cells to nanostructured surfaces and subsequent influences on cellular functions. Specific examples are also given to illustrate the potential nanostructures may have for biomedical applications and regenerative medicine.
Collapse
|
38
|
Neoh KG, Hu X, Zheng D, Kang ET. Balancing osteoblast functions and bacterial adhesion on functionalized titanium surfaces. Biomaterials 2012; 33:2813-22. [DOI: 10.1016/j.biomaterials.2012.01.018] [Citation(s) in RCA: 203] [Impact Index Per Article: 16.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2011] [Accepted: 01/09/2012] [Indexed: 12/12/2022]
|
39
|
Wang PY, Thissen H, Tsai WB. The roles of RGD and grooved topography in the adhesion, morphology, and differentiation of C2C12 skeletal myoblasts. Biotechnol Bioeng 2012; 109:2104-15. [PMID: 22359221 DOI: 10.1002/bit.24452] [Citation(s) in RCA: 62] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2011] [Revised: 01/16/2012] [Accepted: 01/18/2012] [Indexed: 02/01/2023]
Abstract
Both chemical and topographic cues are crucial for the development of skeletal muscle. In this study, the relative roles of both signals in regard to cell adhesion, morphology, and differentiation of C2C12 skeletal myoblasts were investigated. Grooved polystyrene substrates containing grooves with approximately 900 nm in width with 600 nm ridge spans and 665 nm in depth were conjugated with the cell adhesion peptide arginine-glycine-aspartic acid (RGD). RGD conjugation significantly enhanced the adhesion, growth and differentiation of C2C12 cells. On the other hand, anisotropic topography primarily directed the direction and alignment of myoblasts and myotubes. The results in this study provide information regarding the relative roles of chemical and topographic cues in musculoskeletal myogenesis, and are of interest to applications in muscle tissue engineering.
Collapse
Affiliation(s)
- Peng-Yuan Wang
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | | | | |
Collapse
|
40
|
Lü LX, Wang YY, Mao X, Xiao ZD, Huang NP. The effects of PHBV electrospun fibers with different diameters and orientations on growth behavior of bone-marrow-derived mesenchymal stem cells. Biomed Mater 2012; 7:015002. [PMID: 22262727 DOI: 10.1088/1748-6041/7/1/015002] [Citation(s) in RCA: 35] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
Abstract
Microenvironments in which cells live play an important role in the attachment, growth and interactions of cells. To mimic the natural structure of extracellular matrices, electrospinning was applied to fabricate biomaterials into ultrafine fibers. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biocompatible and biodegradable polyester, has been shown to be an excellent biomaterial candidate for tissue engineering. In this study, five types of PHBV fibrous scaffolds with different diameters and orientations were obtained by changing solvents, concentration of electrospun solution and collector. Three kinds of scaffolds with good continuity and suitable mechanical properties, selected according to the morphology and mechanical properties of the scaffolds, were used for studying the influence of fiber diameter and orientation on growth behavior of bone-marrow-derived mesenchymal stem cells (MSCs). The results indicated that the random-oriented nanofibrous scaffold is most favorable for cell growth compared to other scaffolds, while the microfibrous scaffold resulted in the lowest viability of MSCs. The orientation of nanofibers showed a distinct effect on cell morphology by guiding cell skeleton extension. Both the random-oriented and aligned PHBV nanofibrous scaffolds showed to be good candidates for applications in tissue engineering.
Collapse
Affiliation(s)
- Lan-Xin Lü
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, People's Republic of China
| | | | | | | | | |
Collapse
|
41
|
Park J, Kim HN, Kim DH, Levchenko A, Suh KY. Quantitative analysis of the combined effect of substrate rigidity and topographic guidance on cell morphology. IEEE Trans Nanobioscience 2011; 11:28-36. [PMID: 21908261 DOI: 10.1109/tnb.2011.2165728] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Live cells are exquisitely sensitive to both the substratum rigidity and texture. To explore cell responses to both these types of inputs in a precisely controlled fashion, we analyzed the responses of Chinese hamster ovary (CHO) cells to nanotopographically defined substrata of different rigidities, ranging from 1.8 MPa to 1.1 GPa. Parallel arrays of nanogrooves (800-nm width, 800-nm space, and 800-nm depth) on polyurethane (PU)-based material surfaces were fabricated by UV-assisted capillary force lithography (CFL) over an area of 5 mm × 3 mm. We observed dramatic morphological responses of CHO cells, evident in their elongation and polarization along the nanogrooves direction. The cells were progressively more spread and elongated as the substratum rigidity increased, in an integrin β1 dependent manner. However, the degree of orientation was independent of substratum rigidity, suggesting that the cell shape is primarily determined by the topographical cues.
Collapse
Affiliation(s)
- JinSeok Park
- Department of Biomedical Engineering and Institutefor Cell Engineering, Johns Hopkins University, Baltimore, MD 21218, USA. jpark145@ jhmi.edu
| | | | | | | | | |
Collapse
|
42
|
Wang PY, Yu J, Lin JH, Tsai WB. Modulation of alignment, elongation and contraction of cardiomyocytes through a combination of nanotopography and rigidity of substrates. Acta Biomater 2011; 7:3285-93. [PMID: 21664306 DOI: 10.1016/j.actbio.2011.05.021] [Citation(s) in RCA: 119] [Impact Index Per Article: 9.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2010] [Revised: 05/11/2011] [Accepted: 05/18/2011] [Indexed: 10/18/2022]
Abstract
The topographic and mechanical characteristics of engineered tissue constructs, simulating native tissues, should benefit tissue engineering. Previous studies reported that surface topography and substrate rigidity provide biomechanical cues to modulate cellular responses such as alignment, migration and differentiation. To fully address this issue, the present study aimed to examine the influence of nanogrooved substrates with different stiffnesses on the responses of rat cardiomyocytes. Nanogrooved substrates (450nm in groove/ridge width; 100 or 350nm in depth) made of polystyrene and polyurethane were prepared by imprinting from polydimethylsiloxane molds. The morphology and orientation of cardiomyocytes attached to the substrates were found to be influenced mainly by the nanogrooved structures, while the contractile function of the cells was regulated by the coupled effect of surface topography and substrate stiffness. The distribution of intracellular structural proteins such as vinculin and F-actin showed that the surface topography and substrate stiffness regulated the organization of the actin cytoskeleton and focal adhesion complexes, and consequently the contractile behavior of the cardiomyocytes. The beating rates of the cultured cardiomyocytes were dependent on both the surface topography and the substrate stiffness. The study provides insights into the interaction between cardiomyocytes and biomaterials, and benefits cardiac tissue engineering.
Collapse
|
43
|
Lundgren A, Hed Y, Öberg K, Sellborn A, Fink H, Löwenhielm P, Kelly J, Malkoch M, Berglin M. Self-Assembled Arrays of Dendrimer-Gold-Nanoparticle Hybrids for Functional Cell Studies. Angew Chem Int Ed Engl 2011. [DOI: 10.1002/ange.201006544] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
44
|
Lundgren A, Hed Y, Öberg K, Sellborn A, Fink H, Löwenhielm P, Kelly J, Malkoch M, Berglin M. Self-Assembled Arrays of Dendrimer-Gold-Nanoparticle Hybrids for Functional Cell Studies. Angew Chem Int Ed Engl 2011; 50:3450-3. [DOI: 10.1002/anie.201006544] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2010] [Revised: 01/20/2011] [Indexed: 11/07/2022]
|
45
|
Cell architecture–cell function dependencies on titanium arrays with regular geometry. Biomaterials 2010; 31:5729-40. [DOI: 10.1016/j.biomaterials.2010.03.073] [Citation(s) in RCA: 74] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2010] [Accepted: 03/29/2010] [Indexed: 11/18/2022]
|
46
|
Wang PY, Yu HT, Tsai WB. Modulation of alignment and differentiation of skeletal myoblasts by submicron ridges/grooves surface structure. Biotechnol Bioeng 2010; 106:285-94. [PMID: 20148416 DOI: 10.1002/bit.22697] [Citation(s) in RCA: 48] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
Alignment and fusion of myoblasts into parallel arrays of multinucleated myotubes are critical in skeletal muscle tissue engineering. It is well known that contact guidance by grooves/ridges structures induces myoblasts to align and to migrate along the anisotropic direction. In this study, two series of grooved substrata with different widths (450 and 900 nm) and different depths (100, 350, and 550 nm) were studied on their effects on myoblast adhesion, proliferation, and differentiation into myotubes. We found that C2C12 cells were aligned and elongated along the direction of grooves. Groove depth was more influential on cellular morphology, proliferation, and differentiation than groove width. While cell proliferation was retarded on the grooved surfaces especially on the substrate with 900/550 nm (width/depth), differentiation was also enhanced on the patterned surfaces compared to the flat control. Our results demonstrated the potential of grooved substrata with submicron scale in skeletal muscle tissue engineering.
Collapse
Affiliation(s)
- Peng-Yuan Wang
- Department of Chemical Engineering, National Taiwan University, No. 1, Roosevelt Rd., Sec. 4, Taipei 106, Taiwan
| | | | | |
Collapse
|
47
|
Tsai SW, Cheng YH, Chang Y, Liu HL, Tsai WB. Type I collagen structure modulates the behavior of osteoblast-like cells. J Taiwan Inst Chem Eng 2010. [DOI: 10.1016/j.jtice.2009.10.002] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
48
|
Vlad MD, Valle LJ, Poeată I, López J, Torres R, Barracó M, Fernández E. Biphasic calcium sulfate dihydrate/iron-modified alpha-tricalcium phosphate bone cement for spinal applications:
in vitro
study. Biomed Mater 2010; 5:25006. [DOI: 10.1088/1748-6041/5/2/025006] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
49
|
McCullen SD, Haslauer CM, Loboa EG. Musculoskeletal mechanobiology: interpretation by external force and engineered substratum. J Biomech 2009; 43:119-27. [PMID: 19815216 DOI: 10.1016/j.jbiomech.2009.09.017] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 08/21/2009] [Indexed: 10/20/2022]
Abstract
Mechanobiology aims to discover how the mechanical environment affects the biological activity of cells and how cells' ability to sense these mechanical cues is converted into elicited cellular responses. Musculoskeletal mechanobiology is of particular interest given the high mechanical loads that musculoskeletal tissues experience on a daily basis. How do cells within these mechanically active tissues interpret external loads imposed on their extracellular environment, and, how are cell-substrate interactions converted into biochemical signals? This review outlines many of the main mechanotransduction mechanisms known to date, and describes recent literature examining effects of both external forces and cell-substrate interactions on musculoskeletal cells. Whether via application of external forces and/or cell-substrate interactions, our understanding and regulation of musculoskeletal mechanobiology can benefit by expanding upon traditional models, and shedding new light through novel investigative approaches. Current and future work in this field is focused on identifying specific forces, stresses, and strains at the cellular and tissue level through both experimental and computational approaches, and analyzing the role of specific proteins through fluorescence-based investigations and knockdown models.
Collapse
Affiliation(s)
- Seth D McCullen
- Joint Department of Biomedical Engineering at University of North Carolina at Chapel Hill and North Carolina State University, 2142 Burlington Laboratories, Campus Box 7115, Raleigh, NC 27695-7115, USA
| | | | | |
Collapse
|
50
|
Tsai WB, Ting YC, Yang JY, Lai JY, Liu HL. Fibronectin modulates the morphology of osteoblast-like cells (MG-63) on nano-grooved substrates. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2009; 20:1367-1378. [PMID: 19132502 DOI: 10.1007/s10856-008-3687-8] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2008] [Accepted: 12/29/2008] [Indexed: 05/27/2023]
Abstract
Cell interactions with biomaterials are affected by surface topographic and chemical cues. Although it is well-known that nanometrical grooves/ridges structure modulates cellular spreading, elongation, and alignment, the combinational influence of surface topographic and chemical cues is not well studied. In this study, nano-textured silicon substrata with parallel ridges of 90, 250, or 500 nm wide, separated by grooves with equal width, were fabricated by electron beam lithography and dry etching techniques. Osteoblast-like cells, MG-63, were cultured on the patterned substrata with or without pre-adsorption of fibronectin. The cell morphology was imaged by scanning electron microscopy, and analyzed by image software. We found that FN coating initially modulated cellular spreading, length, and orientation on all types of grooved surfaces. However, after 24 h of culture, the cell morphology was not affected by FN coating on the 250-nm and 500-nm surfaces, while FN decreased cell alignment on the 90-nm surfaces. Our results suggest that surface chemical cues influence the initial cell-substratum contact, while the long-term cellular morphology is dictated by surface topographic cues.
Collapse
Affiliation(s)
- Wei-Bor Tsai
- Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan.
| | | | | | | | | |
Collapse
|