Functional groups affect physical and biological properties of dextran-based hydrogels

Polymers and their engineered analogues for ocular drug delivery: Enhancing therapeutic precision

Ocular drug delivery is constrained by anatomical and physiological barriers, necessitating innovative solutions for effective therapy. Natural polymers like hyaluronic acid, chitosan, and gelatin, alongside synthetic counterparts such as PLGA and PEG, have gained prominence for their biocompatibility and controlled release profiles. Recent strides in polymer conjugation strategies have enabled targeted delivery through ligand integration, facilitating tissue specificity and cellular uptake. This versatility accommodates combined drug delivery, addressing diverse anterior (e.g., glaucoma, dry eye) and posterior segment (e.g., macular degeneration, diabetic retinopathy) afflictions. The review encompasses an in-depth exploration of each natural and synthetic polymer, detailing their individual advantages and disadvantages for ocular drug delivery. By transcending ocular barriers and refining therapeutic precision, these innovations promise to reshape the management of anterior and posterior segment eye diseases.

Polymeric biomaterials for wound healing

Skin indicates a person's state of health and is so important that it influences a person's emotional and psychological behavior. In this context, the effective treatment of wounds is a major concern, since several conventional wound healing materials have not been able to provide adequate healing, often leading to scar formation. Hence, the development of innovative biomaterials for wound healing is essential. Natural and synthetic polymers are used extensively for wound dressings and scaffold production. Both natural and synthetic polymers have beneficial properties and limitations, so they are often used in combination to overcome overcome their individual limitations. The use of different polymers in the production of biomaterials has proven to be a promising alternative for the treatment of wounds, as their capacity to accelerate the healing process has been demonstrated in many studies. Thus, this work focuses on describing several currently commercially available solutions used for the management of skin wounds, such as polymeric biomaterials for skin substitutes. New directions, strategies, and innovative technologies for the design of polymeric biomaterials are also addressed, providing solutions for deep burns, personalized care and faster healing.

Recent Advances in Bioengineered Scaffolds for Cutaneous Wound Healing

Wound healing is an evolved dynamic biological process. Though many research and clinical approaches have been explored to restore damaged or diseased skin, the current treatment for deep cutaneous injuries is far from being perfect, and the ideal regenerative therapy remains a significant challenge. Of all treatments, bioengineered scaffolds play a key role and represent great progress in wound repair and skin regeneration. In this review, we focus on the latest advancement in biomaterial scaffolds for wound healing. We discuss the emerging philosophy of designing biomaterial scaffolds, followed by precursor development. We pay particular attention to the therapeutic interventions of bioengineered scaffolds for cutaneous wound healing, and their dual effects while conjugating with bioactive molecules, stem cells, and even immunomodulation. As we review the advancement and the challenges of the current strategies, we also discuss the prospects of scaffold development for wound healing.

Tuning Physicochemical Properties of a Macroporous Polysaccharide-Based Scaffold for 3D Neuronal Culture

Central nervous system (CNS) lesions are a leading cause of death and disability worldwide. Three-dimensional neural cultures in biomaterials offer more physiologically relevant models for disease studies, toxicity screenings or in vivo transplantations. Herein, we describe the development and use of pullulan/dextran polysaccharide-based scaffolds for 3D neuronal culture. We first assessed scaffolding properties upon variation of the concentration (1%, 1.5%, 3% w/w) of the cross-linking agent, sodium trimetaphosphate (STMP). The lower STMP concentration (1%) allowed us to generate scaffolds with higher porosity (59.9 ± 4.6%), faster degradation rate (5.11 ± 0.14 mg/min) and lower elastic modulus (384 ± 26 Pa) compared with 3% STMP scaffolds (47 ± 2.1%, 1.39 ± 0.03 mg/min, 916 ± 44 Pa, respectively). Using primary cultures of embryonic neurons from PGKCre, Rosa26tdTomato embryos, we observed that in 3D culture, embryonic neurons remained in aggregates within the scaffolds and did not attach, spread or differentiate. To enhance neuronal adhesion and neurite outgrowth, we then functionalized the 1% STMP scaffolds with laminin. We found that treatment of the scaffold with a 100 μg/mL solution of laminin, combined with a subsequent freeze-drying step, created a laminin mesh network that significantly enhanced embryonic neuron adhesion, neurite outgrowth and survival. Such scaffold therefore constitutes a promising neuron-compatible and biodegradable biomaterial.

Recent Progress on Polysaccharide-Based Hydrogels for Controlled Delivery of Therapeutic Biomolecules

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields.

Myofibroblast activation in synthetic fibrous matrices composed of dextran vinyl sulfone

Mechanical interactions between fibroblasts and their surrounding extracellular matrix (ECM) guide fundamental behaviors such as spreading, migration, and proliferation that underlie disease pathogenesis. The challenges of studying ECM mechanics in vivo have motivated the development of in vitro models of the fibrous ECM in which fibroblasts reside. Natural materials such as collagen hydrogels bear structural and biochemical resemblance to stromal ECM, but mechanistic studies in these settings are often confounded by cell-mediated material degradation and the lack of structural and mechanical tunability. Here, we established a new material system composed of electrospun dextran vinyl sulfone (DexVS) polymeric fibers. These fibrous matrices exhibit mechanical tunability at both the single fiber (80-340 MPa) and bulk matrix (0.77-11.03 kPa) level, as well as long-term stability in mechanical properties over a two-week period. Cell adhesion to these matrices can be either user-defined by functionalizing synthetic fibers with thiolated adhesive peptides or methacrylated heparin to sequester cell-derived ECM proteins. We utilized DexVS fibrous matrices to investigate the role of matrix mechanics on the activation of fibroblasts into myofibroblasts, a key step of the fibrotic progression. In contrast to previous findings with non-fibrous hydrogel substrates, we find that fibroblasts in soft and deformable matrices exhibit increased spreading, focal adhesion formation, proliferation, and myofibroblast activation as compared to cells on stiffer matrices with equivalent starting architecture. STATEMENT OF SIGNIFICANCE: Cellular mechanosensing of fibrillar extracellular matrices plays a critical role in homeostasis and disease progression in stromal connective tissue. Here, we established a new material system composed of electrospun dextran vinyl sulfone polymeric fibers. These matrices exhibit architectural, mechanical, and biochemical tunability to accurately model diverse tissue microenvironments found in the body. In contrast to previous observations with non-fibrous hydrogels, we find that fibroblasts in soft and deformable fibrous matrices exhibit increased spreading and focal adhesion formation as compared to those in stiffer matrices with equivalent architecture. We also investigated the role of matrix stiffness on myofibroblast activation, a critical step in the fibrotic cascade, and find that low stiffness matrices promote increased myofibroblast activation.

Skin tissue regeneration for burn injury

The skin is the largest organ of the body, which meets the environment most directly. Thus, the skin is vulnerable to various damages, particularly burn injury. Skin wound healing is a serious interaction between cell types, cytokines, mediators, the neurovascular system, and matrix remodeling. Tissue regeneration technology remarkably enhances skin repair via re-epidermalization, epidermal-stromal cell interactions, angiogenesis, and inhabitation of hypertrophic scars and keloids. The success rates of skin healing for burn injuries have significantly increased with the use of various skin substitutes. In this review, we discuss skin replacement with cells, growth factors, scaffolds, or cell-seeded scaffolds for skin tissue reconstruction and also compare the high efficacy and cost-effectiveness of each therapy. We describe the essentials, achievements, and challenges of cell-based therapy in reducing scar formation and improving burn injury treatment.

Effect of cross-linking on the physicochemical and in vitro properties of pullulan/dextran microbeads

Hydrogels are very promising for tissue engineering as they provide scaffolds and a suitable microenvironment to control cell behavior and tissue regeneration. We used a patented method to obtain beads of pullulan/dextran cross-linked with sodium trimetaphosphate (STMP), that were already described for in vivo bone repair. The aim of this study was to provide a comparative analysis of microbeads made of polysaccharides prepared using three different STMP feeding ratio of 1.5, 2.25 or 3 % w/w. The morphology, swelling and biodegradability of these structures were assessed. Mesenchymal stem cells were also seeded to evaluate the cell organization onto the beads. We found that the amount of phosphorus resulting from the cross-linking was proportional to the introduced STMP concentration. An increase of cross-linking decreased the in vitro enzymatic degradability, and also decreased the swelling in PBS or water. The microstructures observed by SEM and confocal microscopy indicated that homogeneous spherical microbeads were obtained, except for the lower cross-linking ratio where the shapes were altered. Beads hydrated in PBS exhibited a mean diameter ranging from 400 to 550 µm with the decrease of STMP ratio. Cells adhered to the surface of microbeads even in the absence of protein coating. Cell viability studies revealed an increase in cell numbers over two weeks for the highest cross-linked beads, whereas the two lowest STMP concentrations induced a decrease of cell viability. Overall, this study demonstrated that pullulan/dextran hydrogels can be designed as microbeads with adjustable physicochemical and biological properties to fulfill requirements for tissue engineering approaches.

Diffusing Colloidal Probes of kT-Scale Biomaterial-Cell Interactions

In the optimization of applied biomaterials, measurements of their interactions with cell surfaces are important to understand their influence on specific and nonspecific cell surface adhesion, internalization pathways, and toxicity. In this study, a novel approach using dark field video microscopy with combined real-time particle and cell tracking allows the trajectories of biomaterial-coated colloids to be monitored in relation to their distance from cell perimeters. Dynamic and statistical mechanical analyses enable direct measurement of colloid-cell surface association lifetimes and interaction potentials mediated by biomaterials. Our analyses of colloidal transport showed polyethylene glycol (PEG) and bovine serum albumin (BSA) lead to net repulsive interactions with cell surfaces, while dextran and hyaluronic acid (HA) lead to reversible and irreversible association to the cell surface, respectively. Our results demonstrate how diffusing colloidal probes can be used for nonobtrusive, sensitive measurements of biomaterial-cell surface interactions important to therapeutics, diagnostics, and tissue engineering.

Engineered Biopolymeric Scaffolds for Chronic Wound Healing

Skin regeneration requires the coordinated integration of concomitant biological and molecular events in the extracellular wound environment during overlapping phases of inflammation, proliferation, and matrix remodeling. This process is highly efficient during normal wound healing. However, chronic wounds fail to progress through the ordered and reparative wound healing process and are unable to heal, requiring long-term treatment at high costs. There are many advanced skin substitutes, which mostly comprise bioactive dressings containing mammalian derived matrix components, and/or human cells, in clinical use. However, it is presently hypothesized that no treatment significantly outperforms the others. To address this unmet challenge, recent research has focused on developing innovative acellular biopolymeric scaffolds as more efficacious wound healing therapies. These biomaterial-based skin substitutes are precisely engineered and fine-tuned to recapitulate aspects of the wound healing milieu and target specific events in the wound healing cascade to facilitate complete skin repair with restored function and tissue integrity. This mini-review will provide a brief overview of chronic wound healing and current skin substitute treatment strategies while focusing on recent engineering approaches that regenerate skin using synthetic, biopolymeric scaffolds. We discuss key polymeric scaffold design criteria, including degradation, biocompatibility, and microstructure, and how they translate to inductive microenvironments that stimulate cell infiltration and vascularization to enhance chronic wound healing. As healthcare moves toward precision medicine-based strategies, the potential and therapeutic implications of synthetic, biopolymeric scaffolds as tunable treatment modalities for chronic wounds will be considered.

Acellular Hydrogels for Regenerative Burn Wound Healing: Translation from a Porcine Model

Currently available skin grafts and skin substitute for healing following third-degree burn injuries is fraught with complications, often resulting in long-term physical and psychological sequelae. Synthetic treatment that can promote wound healing in a regenerative fashion would provide an off-the-shelf, non-immunogenic strategy to improve clinical care of severe burn wounds. Here, we demonstrate vulnerary efficacy and accelerated healing mechanism of dextran-based hydrogel in third-degree porcine burn model. The model was optimized to allow examination of the hydrogel treatment for clinical translation and its regenerative response mechanisms. Hydrogel treatment accelerated third-degree burn wound healing by rapid wound closure, improved reepithelialization, enhanced extracellular matrix remodeling, and greater nerve reinnervation, compared to the dressing treated group. These effects appear to be mediated through the ability of the hydrogel to facilitate a rapid but brief initial inflammatory response that coherently stimulates neovascularization within the granulation tissue during the first week of treatment, followed by an efficient vascular regression to promote a regenerative healing process. Our results suggest that the dextran-based hydrogels may substantially improve healing quality and reduce skin grafting incidents and thus pave the way for clinical studies to improve the care of severe burn injury patients.

Cell-laden photocrosslinked GelMA-DexMA copolymer hydrogels with tunable mechanical properties for tissue engineering

To effectively repair or replace damaged tissues, it is necessary to design three dimensional (3D) extracellular matrix (ECM) mimicking scaffolds with tunable biomechanical properties close to the desired tissue application. In the present work, gelatin methacrylate (GelMA) and dextran glycidyl methacrylate (DexMA) with tunable mechanical and biological properties were utilized to prepared novel bicomponent polymeric hydrogels by cross-linking polymerization using photoinitiation. We controlled the degree of substitution (DS) of glycidyl methacrylate in DexMA so that they could obtain relevant mechanical properties. The results indicated that copolymer hydrogels demonstrated a lower swelling ratio and higher compressive modulus as compared to the GelMA. Moreover, all of the hydrogels exhibited a honeycomb-like architecture, the pore sizes decreased as DS increased, and NIH-3T3 fibroblasts encapsulated in these hydrogels all exhibited excellent viability. These characteristics suggest a class of photocrosslinkable, tunable mechanically copolymer hydrogels that may find potential application in tissue engineering and regenerative medicine applications.

Effect of microstructure on population growth parameters of Escherichia coli in gelatin-dextran systems

Current literature acknowledges the effect of food structure on bacterial dynamics. Most studies introduce this "structure" factor using a single gelling agent, resulting in a homogeneous environment, whereas in practice most food products are heterogeneous. Therefore, this study focuses on heterogeneous protein-polysaccharide mixtures, based on gelatin and dextran. These mixtures show phase separation, leading to a range of heterogeneous microstructures by adjusting relative concentrations of both gelling agents. Based on confocal microscope observations, the growth of Escherichia coli in gelatin-dextran systems was observed to occur in the dextran phase. To find a relation between microscopic and population behavior, growth experiments were performed in binary and singular gelatin-dextran systems and culture broth at 23.5°C, with or without adding 2.9% (wt/vol) NaCl. The Baranyi and Roberts growth model was fitted to the experimental data and parameter estimates were statistically compared. For salted binary mixtures, a decrease in the population maximum cell density was observed with increasing gelatin concentration. In this series, for one type of microstructure, i.e., a gelatin matrix phase with a disperse dextran phase, the maximum cell density decreased with decreasing percentage of dextran phase. However, this relation no longer held when other types of microstructure were observed. Compared to singular systems, adding a second gelling agent in the presence of NaCl had an effect on population lag phases and maximum cell densities. For unsalted media, the growth parameters of singular and binary mixtures were comparable. Introducing this information into mathematical models leads to more reliable growth predictions and enhanced food safety.

The crosslinking of polysaccharides with polyamines and dextran-polyallylamine antibacterial hydrogels

A facile modular approach to rapidly prepare pH-responsive hydrogels by crosslinking polysaccharides with polyamines is demonstrated. Hydrogels are prepared by first reacting the less reactive polysaccharides with the cross-linker epichlorohydrin and completed by the addition of polyamines. The crosslinking of polysaccharides with polyamines provides a facile method for incorporating functionality into polysaccharide based hydrogels. This process is demonstrated with the polysaccharides dextran, pullulan and carboxymethyl cellulose and with the polyamines polyallylamine and polyethylene imine. The hydrogels were characterized by FTIR and swelling studies, which showed pH-dependent swelling due to the presence of the polyamine. The hydrogels can also be tailored by varying the mass ratio between the polysaccharide and polyamine. Absorption studies of organic analytes showed the polyamine content affecting the uptake of a charged substrate (methylene blue) and no effect on a neutral substrate (6-methyl coumarin). This synthetic method was also used to prepare hydrogels with antibacterial activity against E. coli and S. aureus by utilizing an amphiphilic polyallylamine.

Hypoxia-inducible hydrogels

Oxygen is vital for the existence of all multicellular organisms, acting as a signalling molecule regulating cellular activities. Specifically, hypoxia, which occurs when the partial pressure of oxygen falls below 5%, plays a pivotal role during development, regeneration and cancer. Here we report a novel hypoxia-inducible (HI) hydrogel composed of gelatin and ferulic acid that can form hydrogel networks via oxygen consumption in a laccase-mediated reaction. Oxygen levels and gradients within the hydrogels can be accurately controlled and precisely predicted. We demonstrate that HI hydrogels guide vascular morphogenesis in vitro via hypoxia-inducible factors activation of matrix metalloproteinases and promote rapid neovascularization from the host tissue during subcutaneous wound healing. The HI hydrogel is a new class of biomaterials that may prove useful in many applications, ranging from fundamental studies of developmental, regenerative and disease processes through the engineering of healthy and diseased tissue models towards the treatment of hypoxia-regulated disorders.

Engineering dextran-based scaffolds for drug delivery and tissue repair

Owing to its chemically reactive hydroxyl groups, dextran can be modified with different functional groups to form spherical, tubular and 3D network structures. The development of novel functional scaffolds for efficient controlled release and tissue regeneration has been a major research interest, and offers promising therapeutics for many diseases. Dextran-based scaffolds are naturally biodegradable and can serve as bioactive carriers for many protein biomolecules. The reconstruction of the in vitro microenvironment with proper signaling cues for large-scale tissue regenerative scaffolds has yet to be fully developed, and remains a significant challenge in regenerative medicine. This paper will describe recent advances in dextran-based polymers and scaffolds for controlled release and tissue engineering. Special attention is given to the development of dextran-based hydrogels that are precisely manipulated with desired structural properties and encapsulated with defined angiogenic growth factors for therapeutic neovascularization, as well as their potential for wound repair.

Integration and regression of implanted engineered human vascular networks during deep wound healing

The ability of vascularized constructs to integrate with tissues may depend on the kinetics and stability of vascular structure development. This study assessed the functionality and durability of engineered human vasculatures from endothelial progenitors when implanted in a mouse deep burn-wound model. Human vascular networks, derived from endothelial colony-forming cells in hyaluronic acid hydrogels, were transplanted into third-degree burns. On day 3 following transplantation, macrophages rapidly degraded the hydrogel during a period of inflammation; through the transitions from inflammation to proliferation (days 5-7), the host's vasculatures infiltrated the construct, connecting with the human vessels within the wound area. The growth of mouse vessels near the wound area supported further integration with the implanted human vasculatures. During this period, the majority of the vessels (∼60%) in the treated wound area were human. Although no increase in the density of human vessels was detected during the proliferative phase, they temporarily increased in size. This growth peaked at day 7, the middle of the proliferation stage, and then decreased by the end of the proliferation stage. As the wound reached the remodeling period during the second week after transplantation, the vasculatures including the transplanted human vessels generally regressed, and few microvessels, wrapped by mouse smooth muscle cells and with a vessel area less than 200 μm² (including the human ones), remained in the healed wound. Overall, this study offers useful insights for the development of vascularization strategies for wound healing and ischemic conditions, for tissue-engineered constructs, and for tissue regeneration.

Vascular tissue engineering: biodegradable scaffold platforms to promote angiogenesis

The ability to understand and regulate human vasculature development and differentiation has the potential to benefit patients suffering from a variety of ailments, including cardiovascular disease, peripheral vascular disease, ischemia, and burn wounds. Current clinical treatments for vascular-related diseases commonly use the grafting from patients of autologous vessels, which are limited and often damaged due to disease. Considerable progress is being made through a tissue engineering strategy in the vascular field. Tissue engineering takes a multidisciplinary approach seeking to repair, improve, or replace biological tissue function in a controlled and predictable manner. To address the clinical need to perfuse and repair damaged, ischemic tissue, one approach of vascular engineering aims to understand and promote the growth and differentiation of vascular networks. Vascular tissue engineered constructs enable the close study of vascular network assembly and vessel interactions with the surrounding microenvironment. Scaffold platforms provide a method to control network development through the biophysical regulation of different scaffold properties, such as composition, mechanics, dimensionality, and so forth. Following a short description of vascular physiology and blood vessel biomechanics, the key principles in vascular tissue engineering are discussed. This review focuses on various biodegradable scaffold platforms and demonstrates how they are being used to regulate, promote, and understand angiogenesis and vascular network formation.

Spatial control of cell-mediated degradation to regulate vasculogenesis and angiogenesis in hyaluronan hydrogels

Matrix remodeling is crucial for neovascularization, however its utilization to control this process in synthetic biomaterials has been limited. Here, we utilized hyaluronic acid (HA) hydrogels to spatially control cellular remodeling during vascular network formation. Specifically, we exploited a secondary radical polymerization to alter the ability of cells to degrade the hydrogel and utilized it to create spatial patterning using light initiation. We first demonstrated the ability of the hydrogel to either support or inhibit in vitro vasculogenesis of endothelial colony-forming cells (ECFCs) or angiogenesis from ex ovo chorioallantoic membranes. We showed that vascular tube branching and sprouting, which required matrix metalloproteinases (MMPs)-dependent remodeling, could be achieved in hydrogels formed by primary addition-crosslinking only. Although ECFCs expressed higher levels of MMPs in the hydrogels with the secondary radical crosslinking, the generated kinetic chains disabled cell-mediated remodeling and therefore vascular formation was arrested at the vacuole and lumen stage. We then patterned hydrogels to have regions that either permitted or inhibited cell-mediated degradation during in vitro vasculogenesis or angiogenesis. Our ability to control degradation cues that regulate vascular tube formation is important for the study of vascular biology and the application of synthetic biomaterials in tissue regeneration.

Biomaterial selection for tooth regeneration

Biomaterials are native or synthetic polymers that act as carriers for drug delivery or scaffolds for tissue regeneration. When implanted in vivo, biomaterials should be nontoxic and exert intended functions. For tooth regeneration, biomaterials have primarily served as a scaffold for (1) transplanted stem cells and/or (2) recruitment of endogenous stem cells. This article critically synthesizes our knowledge of biomaterial use in tooth regeneration, including the selection of native and/or synthetic polymers, three-dimensional scaffold fabrication, stem cell transplantation, and stem cell homing. A tooth is a complex biological organ. Tooth loss represents the most common organ failure. Tooth regeneration encompasses not only regrowth of an entire tooth as an organ, but also biological restoration of individual components of the tooth including enamel, dentin, cementum, or dental pulp. Regeneration of tooth root represents perhaps more near-term opportunities than the regeneration of the whole tooth. In the adult, a tooth owes its biological vitality, arguably more, to the root than the crown. Biomaterials are indispensible for the regeneration of tooth root, tooth crown, dental pulp, or an entire tooth.

Different effect of hydrogelation on antifouling and circulation properties of dextran-iron oxide nanoparticles

Premature recognition and clearance of nanoparticulate imaging and therapeutic agents by macrophages in the tissues can dramatically reduce both the nanoparticle half-life and delivery to the diseased tissue. Grafting nanoparticles with hydrogels prevents nanoparticulate recognition by liver and spleen macrophages and greatly prolongs circulation times in vivo. Understanding the mechanisms by which hydrogels achieve this "stealth" effect has implications for the design of long-circulating nanoparticles. Thus, the role of plasma protein absorption in the hydrogel effect is not yet understood. Short-circulating dextran-coated iron oxide nanoparticles could be converted into stealth hydrogel nanoparticles by cross-linking with 1-chloro-2,3-epoxypropane. We show that hydrogelation did not affect the size, shape and zeta potential, but completely prevented the recognition and clearance by liver macrophages in vivo. Hydrogelation decreased the number of hydroxyl groups on the nanoparticle surface and reduced the binding of the anti-dextran antibody. At the same time, hydrogelation did not reduce the absorption of cationic proteins on the nanoparticle surface. Specifically, there was no effect on the binding of kininogen, histidine-rich glycoprotein, and protamine sulfate to the anionic nanoparticle surface. In addition, hydrogelation did not prevent activation of plasma kallikrein on the metal oxide surface. These data suggest that (a) a stealth hydrogel coating does not mask charge interactions with iron oxide surface and (b) the total blockade of plasma protein absorption is not required for maintaining iron oxide nanoparticles' long-circulating stealth properties. These data illustrate a novel, clinically promising property of long-circulating stealth nanoparticles.

Dextran hydrogel scaffolds enhance angiogenic responses and promote complete skin regeneration during burn wound healing

Neovascularization is a critical determinant of wound-healing outcomes for deep burn injuries. We hypothesize that dextran-based hydrogels can serve as instructive scaffolds to promote neovascularization and skin regeneration in third-degree burn wounds. Dextran hydrogels are soft and pliable, offering opportunities to improve the management of burn wound treatment. We first developed a procedure to treat burn wounds on mice with dextran hydrogels. In this procedure, we followed clinical practice of wound excision to remove full-thickness burned skin, and then covered the wound with the dextran hydrogel and a dressing layer. Our procedure allows the hydrogel to remain intact and securely in place during the entire healing period, thus offering opportunities to simplify the management of burn wound treatment. A 3-week comparative study indicated that dextran hydrogel promoted dermal regeneration with complete skin appendages. The hydrogel scaffold facilitated early inflammatory cell infiltration that led to its rapid degradation, promoting the infiltration of angiogenic cells into the healing wounds. Endothelial cells homed into the hydrogel scaffolds to enable neovascularization by day 7, resulting in an increased blood flow significantly greater than treated and untreated controls. By day 21, burn wounds treated with hydrogel developed a mature epithelial structure with hair follicles and sebaceous glands. After 5 weeks of treatment, the hydrogel scaffolds promoted new hair growth and epidermal morphology and thickness similar to normal mouse skin. Collectively, our evidence shows that customized dextran-based hydrogel alone, with no additional growth factors, cytokines, or cells, promoted remarkable neovascularization and skin regeneration and may lead to novel treatments for dermal wounds.

Hyaluronic Acid hydrogels support cord-like structures from endothelial colony-forming cells

The generation of functional vascular networks has the potential to improve treatment for vascular diseases and to facilitate successful organ transplantation. Endothelial colony-forming cells (ECFCs) have robust proliferative potential and can form vascular networks in vivo. ECFCs are recruited from a bone marrow niche to the site of vascularization, where cues from the extracellular matrix instigate vascular morphogenesis. Although this process has been elucidated using natural matrix, little is known about vascular morphogenesis by ECFCs in synthetic matrix, a xeno-free scaffold that can provide a more controllable and clinically relevant alternative for regenerative medicine. We sought to study hyaluronic acid (HA) hydrogels as three-dimensional scaffolds for capillary-like structure formation from ECFCs, and to determine the crucial parameters needed to design such synthetic scaffolds. We found that ECFCs express HA-specific receptors and that vascular endothelial growth factor stimulates hyaluronidase expression in ECFCs. Using a well-defined and controllable three-dimensional HA culture system, we were able to decouple the effect of matrix viscoelasticity from changes in adhesion peptide density. We determined that decreasing matrix viscoelasticity, which corresponds to a loose ultrastructure, significantly increases ECFC vascular tube length and area, and that the effect of local delivery of vascular endothelial growth factor within the hydrogel depends on the makeup of the synthetic environment. Collectively, these results set forth initial design criteria that need to be considered in developing vascularized tissue constructs.

A review on composite liposomal technologies for specialized drug delivery

The combination of liposomes with polymeric scaffolds could revolutionize the current state of drug delivery technology. Although liposomes have been extensively studied as a promising drug delivery model for bioactive compounds, there still remain major drawbacks for widespread pharmaceutical application. Two approaches for overcoming the factors related to the suboptimal efficacy of liposomes in drug delivery have been suggested. The first entails modifying the liposome surface with functional moieties, while the second involves integration of pre-encapsulated drug-loaded liposomes within depot polymeric scaffolds. This attempts to provide ingenious solutions to the limitations of conventional liposomes such as short plasma half-lives, toxicity, stability, and poor control of drug release over prolonged periods. This review delineates the key advances in composite technologies that merge the concepts of depot polymeric scaffolds with liposome technology to overcome the limitations of conventional liposomes for pharmaceutical applications.