1
|
Palanisamy S, Selvaraju GD, Selvakesavan RK, Venkatachalam S, Bharathi D, Lee J. Unlocking sustainable solutions: Nanocellulose innovations for enhancing the shelf life of fruits and vegetables - A comprehensive review. Int J Biol Macromol 2024; 261:129592. [PMID: 38272412 DOI: 10.1016/j.ijbiomac.2024.129592] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2023] [Revised: 01/11/2024] [Accepted: 01/17/2024] [Indexed: 01/27/2024]
Abstract
Regarding food security and waste reduction, preserving fruits and vegetables is a vital problem. This comprehensive study examines the innovative potential of coatings and packaging made of nanocellulose to extend the shelf life of perishable foods. The distinctive merits of nanocellulose, which is prepared from renewable sources, include exceptional gas barrier performance, moisture retention, and antibacterial activity. As a result of these merits, it is a good option for reducing food spoilage factors such as oxidation, desiccation, and microbiological contamination. Nanocellulose not only enhances food preservation but also complies with industry-wide environmental objectives. This review explores the many facets of nanocellulose technology, from its essential characteristics to its use in the preservation of fruits and vegetables. Furthermore, it deals with vital issues including scalability, cost-effectiveness, and regulatory constraints. While the use of nanocellulose in food preservation offers fascinating potential, it also wants to be cautiously careful to assure affordability, effectiveness, and safety. To fully use the potential of nanocellulose and advance the sustainability plan in the food business, collaboration between scientists, regulatory bodies, and industry stakeholders is important as we stand on the cusp of a revolutionary era in food preservation.
Collapse
Affiliation(s)
- Senthilkumar Palanisamy
- School of Biotechnology, Dr. G R Damodaran College of Science, Coimbatore, Tamilnadu, India.
| | - Gayathri Devi Selvaraju
- Department of Biotechnology, KIT - Kalaignarkarunanidhi Institute of Technology, Coimbatore, Tamil Nadu, India
| | | | | | - Devaraj Bharathi
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
| | - Jintae Lee
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea
| |
Collapse
|
2
|
Hassanpour P, Sadeghsoltani F, Haiaty S, Zakeri Z, Saghebasl S, Izadpanah M, Boroumand S, Mota A, Rahmati M, Rahbarghazi R, Talebi M, Rabbani S, Tafti SHA. Mitochondria-loaded alginate-based hydrogel accelerated angiogenesis in a rat model of acute myocardial infarction. Int J Biol Macromol 2024; 260:129633. [PMID: 38253146 DOI: 10.1016/j.ijbiomac.2024.129633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2023] [Revised: 12/13/2023] [Accepted: 12/25/2023] [Indexed: 01/24/2024]
Abstract
Here, mitochondria were isolated from mesenchymal stem cells (MSCs) after being treated with mitochondria-stimulating substrates, 50 μM metformin (Met), and 40 μM dichloroacetic acid (DCA). The isolated mitochondria (2 × 107 particles) were characterized and encapsulated inside 100 μl hydrogel composed of alginate (3 % w/v; Alg)/gelatin (Gel; 1 % w/v) enriched with 1 μM pyrrole (Pyr) solidified in the presence of 0.2 M FeCl3. The physicochemical properties and cytocompatibility of prepared hydrogels were assessed using FTIR, swelling, biodegradation, porosity assays, and scanning electron microscopy (SEM). The mitochondria-bearing hydrogel was injected into the ischemic area of rat hearts. FTIR absorption bands represented that the addition of FeCl3 led to polypyrrole (PPy) formation, polysaccharide oxidation, and interaction between Alg and Gel. SEM images exhibited porous structure and the size of pores was reduced in Alg/Gel + PPy group compared to Alg + PPy hydrogel. Based on the data, both Alg + PPy and Alg/Gel + PPy hydrogels can preserve the integrity and morphology of loaded mitochondria. It was noted that Alg/Gel + PPy hydrogel possessed a higher swelling ratio, degradation, and porosity compared to Alg + PPy group. Data confirmed that Alg/Gel + PPy hydrogel containing 1 μM Pyr yielded the highest survival rate compared to groups with 2 and 4 μM Pyr (p < 0.05). Injection of mitochondria-loaded Alg/Gel + PPy hydrogel yielded significant restoration of left ventricle thickness compared to the infarction, mitochondria, and Alg/Gel + PPy hydrogel groups 14 days post-injection (p < 0.05). Histological analyses revealed a significant increase of vWF+ capillaries and α-SMA+ arterioles in the mitochondria-loaded Alg/Gel + PPy hydrogel group (p < 0.05). Immunofluorescence imaging revealed the ability of rat cardiomyocytes to uptake mitochondria alone or after being loaded into Alg/Gel + PPy hydrogel. These effects were evident in the Alg/Gel + PPy group. Taken together, electroconductive Alg-based hydrogels are suitable platforms for the transplantation of cells and organelles and the regeneration of ischemic heart changes.
Collapse
Affiliation(s)
- Parisa Hassanpour
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran; Department of Clinical Biochemistry and Laboratory Medicine, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Fatemeh Sadeghsoltani
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran; Department of Clinical Biochemistry and Laboratory Medicine, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Sanya Haiaty
- Infectious and Tropical Diseases Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Ziba Zakeri
- Koç University Research Centre for Translational Medicine (KUTTAM), Koç University School of Medicine, Istanbul, Turkey
| | - Solmaz Saghebasl
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Melika Izadpanah
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Safieh Boroumand
- Research Center for Advanced Technologies In Cardiovascular Medicine, Cardiovascular Diseases Research Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Ali Mota
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran; Department of Clinical Biochemistry and Laboratory Medicine, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Mohammad Rahmati
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran.
| | - Reza Rahbarghazi
- Stem Cell Research Center, Tabriz University of Medical Sciences, Tabriz, Iran; Department of Applied Cell Sciences, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran.
| | - Mehdi Talebi
- Department of Applied Cell Sciences, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran
| | - Shahram Rabbani
- Research Center for Advanced Technologies In Cardiovascular Medicine, Cardiovascular Diseases Research Institute, Tehran University of Medical Sciences, Tehran, Iran.
| | - Seyed Hossein Ahmadi Tafti
- Research Center for Advanced Technologies In Cardiovascular Medicine, Cardiovascular Diseases Research Institute, Tehran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
3
|
Uzieliene I, Popov A, Vaiciuleviciute R, Kirdaite G, Bernotiene E, Ramanaviciene A. Polypyrrole-based structures for activation of cellular functions under electrical stimulation. Bioelectrochemistry 2024; 155:108585. [PMID: 37847982 DOI: 10.1016/j.bioelechem.2023.108585] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 10/04/2023] [Accepted: 10/08/2023] [Indexed: 10/19/2023]
Abstract
Polypyrrole (Ppy) is an electroconductive polymer used in various applications, including in vitro experiments with cell cultures under electrical stimulation (ES). Ppy can be applied in various forms and most importantly, it is biocompatible with cells. Ppy specifically directs ES to cells, which makes Ppy a potential polymer for the development of novel technologies for targeted tissue regeneration. The high potential of ES in combination with different Ppy-based systems, such as hydrogels, scaffolds, or Ppy-layers is advantageous to stimulate cellular differentiation towards neurogenic, cardiac, muscle, and osteogenic lineages. Different in-house devices and the principles of ES application used to stimulate cellular functions are reviewed and summarized. The focus of this review is to observe the most relevant studies and their in-house techniques regarding the application of Ppy-based materials for the use of bone, neural, cardiac, and muscle tissue regeneration under ES. Different types of Ppy materials, such as Ppy particles, layers/films, membranes, and 3D-shaped synthetic and natural scaffolds, as well as combining Ppy with different active molecules are reviewed.
Collapse
Affiliation(s)
- Ilona Uzieliene
- Department of Regenerative Medicine, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania; Department of Immunology, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania
| | - Anton Popov
- Department of Immunology, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania; NanoTechnas - Center on Nanotechnology and Materials Sciences, Faculty of Chemistry and Geosciences, Vilnius University, Naugarduko g. 24, LT-03225 Vilnius, Lithuania
| | - Raminta Vaiciuleviciute
- Department of Regenerative Medicine, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania
| | - Gailute Kirdaite
- Department of Experimental, Preventive and Clinical Medicine, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania
| | - Eiva Bernotiene
- Department of Regenerative Medicine, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania; Faculty of Fundamental Sciences, Vilnius Gediminas Technical University, VilniusTech, Sauletekio al. 11, LT-10223 Vilnius, Lithuania
| | - Almira Ramanaviciene
- Department of Immunology, State Research Institute Centre for Innovative Medicine, LT-08406 Vilnius, Lithuania; NanoTechnas - Center on Nanotechnology and Materials Sciences, Faculty of Chemistry and Geosciences, Vilnius University, Naugarduko g. 24, LT-03225 Vilnius, Lithuania.
| |
Collapse
|
4
|
Le CV, Yoon H. Advances in the Use of Conducting Polymers for Healthcare Monitoring. Int J Mol Sci 2024; 25:1564. [PMID: 38338846 PMCID: PMC10855550 DOI: 10.3390/ijms25031564] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Revised: 01/21/2024] [Accepted: 01/22/2024] [Indexed: 02/12/2024] Open
Abstract
Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.
Collapse
Affiliation(s)
- Cuong Van Le
- School of Polymer Science and Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea;
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea
| | - Hyeonseok Yoon
- School of Polymer Science and Engineering, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea;
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea
| |
Collapse
|
5
|
Alosaimi AM, Alorabi RO, Katowah DF, Al-Thagafi ZT, Alsolami ES, Hussein MA, Qutob M, Rafatullah M. Recent Biomedical Applications of Coupling Nanocomposite Polymeric Materials Reinforced with Variable Carbon Nanofillers. Biomedicines 2023; 11:biomedicines11030967. [PMID: 36979948 PMCID: PMC10045870 DOI: 10.3390/biomedicines11030967] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2023] [Revised: 02/15/2023] [Accepted: 03/06/2023] [Indexed: 03/30/2023] Open
Abstract
The hybridization between polymers and carbon materials is one of the most recent and crucial study areas which abstracted more concern from scientists in the past few years. Polymers could be classified into two classes according to the source materials synthetic and natural. Synthetic polymeric materials have been applied over a floppy zone of industrial fields including the field of biomedicine. Carbon nanomaterials including (fullerene, carbon nanotubes, and graphene) classified as one of the most significant sources of hybrid materials. Nanocarbons are improving significantly mechanical properties of polymers in nanocomposites in addition to physical and chemical properties of the new materials. In all varieties of proposed bio-nanocomposites, a considerable improvement in the microbiological performance of the materials has been explored. Various polymeric materials and carbon-course nanofillers were present, along with antibacterial, antifungal, and anticancer products. This review spots the light on the types of synthetic polymers-based carbon materials and presented state-of-art examples on their application in the area of biomedicine.
Collapse
Affiliation(s)
- Abeer M Alosaimi
- Department of Chemistry, Faculty of Science, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia
| | - Randa O Alorabi
- Chemistry Department, Faculty of Science, Ibb University, Ibb 70270, Yemen
| | - Dina F Katowah
- Department of Chemistry, Faculty of Applied Science, Umm Al-Qura University, P.O. Box 16722, Makkah 21955, Saudi Arabia
| | - Zahrah T Al-Thagafi
- Department of Chemistry, Faculty of Science, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia
| | - Eman S Alsolami
- Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589, Saudi Arabia
| | - Mahmoud A Hussein
- Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589, Saudi Arabia
- Chemistry Department, Faculty of Science, Assiut University, Assiut 71516, Egypt
| | - Mohammad Qutob
- Environmental Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| | - Mohd Rafatullah
- Environmental Technology Division, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
- Green Biopolymer, Coatings & Packaging Cluster, School of Industrial Technology, Universiti Sains Malaysia, Penang 11800, Malaysia
| |
Collapse
|
6
|
Borges MHR, Nagay BE, Costa RC, Souza JGS, Mathew MT, Barão VAR. Recent advances of polypyrrole conducting polymer film for biomedical application: Toward a viable platform for cell-microbial interactions. Adv Colloid Interface Sci 2023; 314:102860. [PMID: 36931199 DOI: 10.1016/j.cis.2023.102860] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 02/04/2023] [Accepted: 02/13/2023] [Indexed: 02/18/2023]
Abstract
Polypyrrole (PPy) is one of the most studied conductive polymers due to its electrical conductivity and biological properties, which drive the possibility of numerous applications in the biomedical area. The physical-chemical features of PPy allow the manufacture of biocompatible devices, enhancing cell adhesion and proliferation. Furthermore, owing to the electrostatic interactions between the negatively charged bacterial cell wall and the positive charges in the polymer structure, PPy films can perform an effective antimicrobial activity. PPy is also frequently associated with biocompatible agents and antimicrobial compounds to improve the biological response. Thus, this comprehensive review appraised the available evidence regarding the PPy-based films deposited on metallic implanted devices for biomedical applications. We focus on understanding key concepts that could influence PPy attributes regarding antimicrobial effect and cell behavior under in vitro and in vivo settings. Furthermore, we unravel the several agents incorporated into the PPy film and strategies to improve its functionality. Our findings suggest that incorporating other elements into the PPy films, such as antimicrobial agents, biomolecules, and other biocompatible polymers, may improve the biological responses. Overall, the basic properties of PPy, when combined with other composites, electrostimulation techniques, or surface treatment methods, offer great potential in biocompatibility and/or antimicrobial activities. However, challenges in synthesis standardization and potential limitations such as low adhesion and mechanical strength of the film must be overcome to improve and broaden the application of PPy film in biomedical devices.
Collapse
Affiliation(s)
- Maria H R Borges
- Department of Prosthodontics and Periodontology, Piracicaba Dental School, University of Campinas (UNICAMP), Piracicaba, São Paulo 13414-903, Brazil
| | - Bruna E Nagay
- Department of Prosthodontics and Periodontology, Piracicaba Dental School, University of Campinas (UNICAMP), Piracicaba, São Paulo 13414-903, Brazil
| | - Raphael C Costa
- Department of Prosthodontics and Periodontology, Piracicaba Dental School, University of Campinas (UNICAMP), Piracicaba, São Paulo 13414-903, Brazil
| | - João Gabriel S Souza
- Dental Research Division, Guarulhos University (UNG), Guarulhos, Sāo Paulo 07023-070, Brazil; Dental Science School (Faculdade de Ciências Odontológicas - FCO), Montes Claros, Minas Gerais 39401-303, Brazil
| | - Mathew T Mathew
- Department of Biomedical Sciences, University of Illinois, College of Medicine, Rockford, IL 61107, USA
| | - Valentim A R Barão
- Department of Prosthodontics and Periodontology, Piracicaba Dental School, University of Campinas (UNICAMP), Piracicaba, São Paulo 13414-903, Brazil.
| |
Collapse
|
7
|
Cuenca-Ortolá I, Martínez-Rojas B, Moreno-Manzano V, García Castelló M, Monleón Pradas M, Martínez-Ramos C, Más Estellés J. A Strategy for Magnetic and Electric Stimulation to Enhance Proliferation and Differentiation of NPCs Seeded over PLA Electrospun Membranes. Biomedicines 2022; 10:2736. [PMID: 36359255 PMCID: PMC9687775 DOI: 10.3390/biomedicines10112736] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 10/07/2022] [Accepted: 10/25/2022] [Indexed: 09/30/2023] Open
Abstract
Neural progenitor cells (NPCs) have been shown to serve as an efficient therapeutic strategy in different cell therapy approaches, including spinal cord injury treatment. Despite the reported beneficial effects of NPC transplantation, the low survival and differentiation rates constrain important limitations. Herein, a new methodology has been developed to overcome both limitations by applying a combination of wireless electrical and magnetic stimulation to NPCs seeded on aligned poly(lactic acid) nanofibrous scaffolds for in vitro cell conditioning prior transplantation. Two stimulation patterns were tested and compared, continuous (long stimulus applied once a day) and intermittent (short stimulus applied three times a day). The results show that applied continuous stimulation promotes NPC proliferation and preferential differentiation into oligodendrocytic and neuronal lineages. A neural-like phenotypic induction was observed when compared to unstimulated NPCs. In contrast, intermittent stimulation patterns did not affect NPC proliferation and differentiation to oligodendrocytes or astrocytes morphology with a detrimental effect on neuronal differentiation. This study provides a new approach of using a combination of electric and magnetic stimulation to induce proliferation and further neuronal differentiation, which would improve therapy outcomes in disorders such as spinal cord injury.
Collapse
Affiliation(s)
- Irene Cuenca-Ortolá
- Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Cno. de Vera s/n, 46022 Valencia, Spain
| | - Beatriz Martínez-Rojas
- Neuronal and Tissue Regeneration Laboratory, Centro de Investigación Príncipe Felipe, 46012 Valencia, Spain
| | - Victoria Moreno-Manzano
- Neuronal and Tissue Regeneration Laboratory, Centro de Investigación Príncipe Felipe, 46012 Valencia, Spain
| | - Marcos García Castelló
- Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Cno. de Vera s/n, 46022 Valencia, Spain
| | - Manuel Monleón Pradas
- Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Cno. de Vera s/n, 46022 Valencia, Spain
- Biomedical Research Networking Center in Bioengineering Biomaterials and Nanomedicine, CIBER-BBN, 28029 Madrid, Spain
| | - Cristina Martínez-Ramos
- Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Cno. de Vera s/n, 46022 Valencia, Spain
- Unitat Predepartamental de Medicina, Universitat Jaume I, Avda/Sos Baynat, s/n, 12071 Castellón de la Plana, Spain
| | - Jorge Más Estellés
- Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Cno. de Vera s/n, 46022 Valencia, Spain
| |
Collapse
|
8
|
Fan L, Song C, Lu X, Wang T, Han J, Guo R. In situ preparation of hydroxyapatite in lamellar liquid crystals for joint lubrication and drug delivery. SOFT MATTER 2022; 18:7859-7865. [PMID: 36200686 DOI: 10.1039/d2sm01105k] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Arthritis is a disease that seriously affects the quality of human life, which is partly caused by the reduction of joint lubrication performance. Thus, for the treatment of arthritis, how to improve the lubrication performance of joints is important. The lamellar liquid crystals (LLCs) systems have the potential to be used as joint lubrication due to their double-layer structure and good biocompatibility, however, the LLCs system alone could not provide a satisfactory lubrication effect. Herein, this work synthesized hydroxyapatite (HAP) in situ inside Tween 85/Tween 80/H2O LLCs to construct a biocompatible HAP/Tween 85/Tween 80/H2O LLCs (HAP/LLCs) lubrication system with both sustained drug release properties and anti-wear properties. HAP is the main component of bone with good stability and bioactivity. The LLCs have good lubricating and drug-carrying properties. The impact of HAP on the structure and lubrication properties of LLCs, the mechanism of friction, and the anti-wear reduction of HAP/LLCs were investigated. Moreover, the drug release behavior of the ibuprofen-loaded HAP/LLCs during the friction process was also studied. The results indicated that the addition of HAP could improve the lubricity performance of LLCs. The cumulative drug releasing increased with the friction frequency and was less affected by the load. The related studies provided the theoretical basis for HAP/LLCs for joint lubrication and synergistic therapy.
Collapse
Affiliation(s)
- Lei Fan
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| | - Chao Song
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| | - Ximing Lu
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| | - Tong Wang
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| | - Jie Han
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| | - Rong Guo
- School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, P. R. China.
| |
Collapse
|
9
|
James A, Yadav D. Bioaerogels, the emerging technology for wastewater treatment: A comprehensive review on synthesis, properties and applications. ENVIRONMENTAL RESEARCH 2022; 212:113222. [PMID: 35398081 DOI: 10.1016/j.envres.2022.113222] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 03/15/2022] [Accepted: 03/28/2022] [Indexed: 06/14/2023]
Abstract
Over the past decade use of aerogels has received much attention as an emerging technology for wastewater treatment. However, production of aerogels is not environment-friendly. Owing to its excellent properties such as porosity, three-dimensional structure, being amenable to chemical modifications, it is imperative to devise strategies for their improved production and use. Bioaerogels are non-toxic and most of their precursor compounds are biomass-derived. This review aims to present a comprehensive report on survey of existing literature published on the use of bioaerogels for removal of all major categories of water contaminants, namely, heavy metals, industrial dyes, oil, organic compounds and pharmaceuticals. It also gives critical analysis of the lacunae in the existing knowledge such as lack of studies on domestic sewage, emerging pollutants, toxicity of raw materials and adequate disposal of used adsorbents. Proposals of overcoming the limitations in the applicability of bioaerogels, like combining constructed wetlands with use of bioaerogels, among others have been discussed. In this review, emphasis has been given on production of bioaerogels, with an aim to underscore the potential of valorization of biomass waste to develop novel materials for wastewater treatment in an effort towards creating a circular and green economy.
Collapse
Affiliation(s)
- Anina James
- Department of Zoology, Deen Dayal Upadhyaya College (University of Delhi), Dwarka Sector 3, Delhi, 110078, India.
| | - Deepika Yadav
- Department of Zoology, Shivaji College, University of Delhi, Delhi, India.
| |
Collapse
|
10
|
Vahdatiyekta P, Zniber M, Bobacka J, Huynh TP. A review on conjugated polymer-based electronic tongues. Anal Chim Acta 2022; 1221:340114. [DOI: 10.1016/j.aca.2022.340114] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2022] [Revised: 06/21/2022] [Accepted: 06/21/2022] [Indexed: 11/24/2022]
|
11
|
Jin Z, Lu B, Xu Y. Constructing an electrical microenvironment based on electroactive polymers in the field of bone tissue engineering. INT J POLYM MATER PO 2022. [DOI: 10.1080/00914037.2022.2067537] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Zhengyang Jin
- School of Mechanical Engineering, XinJiang University, Urumchi, China
| | - Bingheng Lu
- School of Mechanical Engineering, XinJiang University, Urumchi, China
- Mirco- and Nano-technology Research Center, State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an, China
- National Innovation Institute of Additive Manufacturing, Xi’an, China
| | - Yan Xu
- School of Mechanical Engineering, XinJiang University, Urumchi, China
| |
Collapse
|
12
|
An Overview of Hierarchical Design of Textile-Based Sensor in Wearable Electronics. CRYSTALS 2022. [DOI: 10.3390/cryst12040555] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Smart textiles have recently aroused tremendous interests over the world because of their broad applications in wearable electronics, such as human healthcare, human motion detection, and intelligent robotics. Sensors are the primary components of wearable and flexible electronics, which convert various signals and external stimuli into electrical signals. While traditional electronic sensors based on rigid silicon wafers can hardly conformably attach on the human body, textile materials including fabrics, yarns, and fibers afford promising alternatives due to their characteristics including light weight, flexibility, and breathability. Of fundamental importance are the needs for fabrics simultaneously having high electrical and mechanical performance. This article focused on the hierarchical design of the textile-based flexible sensor from a structure point of view. We first reviewed the selection of newly developed functional materials for textile-based sensors, including metals, conductive polymers, carbon nanomaterials, and other two-dimensional (2D) materials. Then, the hierarchical structure design principles on different levels from microscale to macroscale were discussed in detail. Special emphasis was placed on the microstructure control of fibers, configurational engineering of yarn, and pattern design of fabrics. Finally, the remaining challenges toward industrialization and commercialization that exist to date were presented.
Collapse
|
13
|
The influence of physicochemical properties on the processibility of conducting polymers: A bioelectronics perspective. Acta Biomater 2022; 139:259-279. [PMID: 34111518 DOI: 10.1016/j.actbio.2021.05.052] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2021] [Revised: 05/24/2021] [Accepted: 05/25/2021] [Indexed: 12/20/2022]
Abstract
Conducting polymers (CPs) possess unique electrical and electrochemical properties and hold great potential for different applications in the field of bioelectronics. However, the widespread implementation of CPs in this field has been critically hindered by their poor processibility. There are four key elements that determine the processibility of CPs, which are thermal tunability, chemical stability, solvent compatibility and mechanical robustness. Recent research efforts have focused on enhancing the processibility of these materials through pre- or post-synthesis chemical modifications, the fabrication of CP-based complexes and composites, and the adoption of additive manufacturing techniques. In this review, the physicochemical and structural properties that underlie the performance and processibility of CPs are examined. In addition, current research efforts to overcome technical limitations and broaden the potential applications of CPs in bioelectronics are discussed. STATEMENT OF SIGNIFICANCE: This review details the inherent properties of CPs that have hindered their use in additive manufacturing for the creation of 3D bioelectronics. A fundamental approach is presented with consideration of the chemical structure and how this contributes to their electrical, thermal and mechanical properties. The review then considers how manipulation of these properties has been addressed in the literature including areas where improvements can be made. Finally, the review details the use of CPs in additive manufacturing and the future scope for the use of CPs and their composites in the development of 3D bioelectronics.
Collapse
|
14
|
Anticancer and antimicrobial evaluation of novel conductive ZnO2 doped polymer patches for cancer treatment and tissue engineering applications. Polym Bull (Berl) 2022. [DOI: 10.1007/s00289-021-04001-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
15
|
Zinovicius A, Rozene J, Merkelis T, Bruzaite I, Ramanavicius A, Morkvenaite-Vilkonciene I. Evaluation of a Yeast-Polypyrrole Biocomposite Used in Microbial Fuel Cells. SENSORS (BASEL, SWITZERLAND) 2022; 22:s22010327. [PMID: 35009869 PMCID: PMC8749611 DOI: 10.3390/s22010327] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Revised: 12/24/2021] [Accepted: 12/30/2021] [Indexed: 05/31/2023]
Abstract
Electrically conductive polymers are promising materials for charge transfer from living cells to the anodes of electrochemical biosensors and biofuel cells. The modification of living cells by polypyrrole (PPy) causes shortened cell lifespan, burdens the replication process, and diminishes renewability in the long term. In this paper, the viability and morphology non-modified, inactivated, and PPy-modified yeasts were evaluated. The results displayed a reduction in cell size, an incremental increase in roughness parameters, and the formation of small structural clusters of polymers on the yeast cells with the increase in the pyrrole concentration used for modification. Yeast modified with the lowest pyrrole concentration showed minimal change; thus, a microbial fuel cell (MFC) was designed using yeast modified by a solution containing 0.05 M pyrrole and compared with the characteristics of an MFC based on non-modified yeast. The maximal generated power of the modified system was 47.12 mW/m2, which is 8.32 mW/m2 higher than that of the system based on non-modified yeast. The open-circuit potentials of the non-modified and PPy-modified yeast-based cells were 335 mV and 390 mV, respectively. Even though applying a PPy layer to yeast increases the charge-transfer efficiency towards the electrode, the damage done to the cells due to modification with a higher concentration of PPy diminishes the amount of charge transferred, as the current density drops by 846 μA/cm2. This decrease suggests that modification by PPy may have a cytotoxic effect that greatly hinders the metabolic activity of yeast.
Collapse
Affiliation(s)
- Antanas Zinovicius
- Department of Mechatronics, Robotics and Digital Manufacturing, Vilnius Gediminas Technical University, 03224 Vilnius, Lithuania; (A.Z.); (J.R.); (T.M.)
| | - Juste Rozene
- Department of Mechatronics, Robotics and Digital Manufacturing, Vilnius Gediminas Technical University, 03224 Vilnius, Lithuania; (A.Z.); (J.R.); (T.M.)
| | - Timas Merkelis
- Department of Mechatronics, Robotics and Digital Manufacturing, Vilnius Gediminas Technical University, 03224 Vilnius, Lithuania; (A.Z.); (J.R.); (T.M.)
| | - Ingrida Bruzaite
- Department of Chemistry and Bioengineering, Faculty of Fundamental Sciences, Vilnius Gediminas Technical University, 10223 Vilnius, Lithuania;
| | - Arunas Ramanavicius
- Department of Physical Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, 03225 Vilnius, Lithuania
- Laboratory of Nanotechnology, State Research Institute Centre for Physical Sciences and Technology, 02300 Vilnius, Lithuania
| | - Inga Morkvenaite-Vilkonciene
- Department of Mechatronics, Robotics and Digital Manufacturing, Vilnius Gediminas Technical University, 03224 Vilnius, Lithuania; (A.Z.); (J.R.); (T.M.)
- Laboratory of Electrochemical Energy Conversion, State Research Institute Centre for Physical Sciences and Technology, 10257 Vilnius, Lithuania
| |
Collapse
|
16
|
Dixon DT, Gomillion CT. Conductive Scaffolds for Bone Tissue Engineering: Current State and Future Outlook. J Funct Biomater 2021; 13:1. [PMID: 35076518 PMCID: PMC8788550 DOI: 10.3390/jfb13010001] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2021] [Revised: 12/12/2021] [Accepted: 12/14/2021] [Indexed: 12/15/2022] Open
Abstract
Bone tissue engineering strategies attempt to regenerate bone tissue lost due to injury or disease. Three-dimensional (3D) scaffolds maintain structural integrity and provide support, while improving tissue regeneration through amplified cellular responses between implanted materials and native tissues. Through this, scaffolds that show great osteoinductive abilities as well as desirable mechanical properties have been studied. Recently, scaffolding for engineered bone-like tissues have evolved with the use of conductive materials for increased scaffold bioactivity. These materials make use of several characteristics that have been shown to be useful in tissue engineering applications and combine them in the hope of improved cellular responses through stimulation (i.e., mechanical or electrical). With the addition of conductive materials, these bioactive synthetic bone substitutes could result in improved regeneration outcomes by reducing current factors limiting the effectiveness of existing scaffolding materials. This review seeks to overview the challenges associated with the current state of bone tissue engineering, the need to produce new grafting substitutes, and the promising future that conductive materials present towards alleviating the issues associated with bone repair and regeneration.
Collapse
Affiliation(s)
- Damion T. Dixon
- School of Environmental, Civil, Agricultural and Mechanical Engineering, University of Georgia, Athens, GA 30602, USA;
| | - Cheryl T. Gomillion
- School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, GA 30602, USA
| |
Collapse
|
17
|
Polypyrrole-coated carbon fibre electrodes for paracetamol and clozapine drug sensing. J Electroanal Chem (Lausanne) 2021. [DOI: 10.1016/j.jelechem.2021.115608] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
18
|
Zhang S, Zhao G, Wang J, Xie C, Liang W, Chen K, Wen Y, Li X. Organic Solvent-Free Preparation of Chitosan Nanofibers with High Specific Surface Charge and Their Application in Biomaterials. ACS APPLIED MATERIALS & INTERFACES 2021; 13:12347-12358. [PMID: 33625203 DOI: 10.1021/acsami.0c21796] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
The application of chitosan nanofibers in biological tissue-engineering materials has attracted wide attention. A novel and organic solvent-free method was developed for the fabrication of rootlike chitosan nanofibers (CSNFs) with diameters of 40-250 nm. This method includes three-step mechanical processing of swelling-beating-centrifugation or swelling-beating-homogenization. The obtained nanofibers showed high yields (>95%) and positive specific surface charges (up to +375 μeq/g) and could be uniformly dispersed in the aqueous phase. The unique fiber shape and the good length-to-diameter ratio of CSNFs endowed chitosan nanofiber paper (CSNFP) products with excellent mechanical properties, and the wet tensile strength of the CSNFPs was nearly five times higher than common chitosan films. In addition, the calvaria-derived preosteoblastic cells exhibited a higher adherence efficiency and proliferation on CSNFP than on chitosan films. The chitosan nanofiber scaffold products also benefited the attachment of preosteoblastic cells and allowed them to grow in three dimensions. This method has significant industrial potential for the industrialization of chitosan nanofibers, which may have broad applications in various biomaterials.
Collapse
Affiliation(s)
- Sihan Zhang
- State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510641, China
| | - Guanglei Zhao
- State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510641, China
| | - Jiming Wang
- State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510641, China
| | - Chong Xie
- State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510641, China
| | - Wenquan Liang
- Department of Spine Surgery, The Third Affiliated Hospital of Southern Medical University, Guangzhou 510500, China
| | - Kebing Chen
- Guangdong Provincial Key Laboratory of Bone and Joint Degeneration Disease, The Third Affiliated Hospital of Southern Medical University, the Third School of Clinical Medicine, Southern Medical University, Academy of Orthopedics of Guangdong Province, Guangzhou 510630, China
| | - Ying Wen
- State Key Laboratory of Pulp and Paper Engineering, School of Light Industry and Engineering, South China University of Technology, Guangzhou 510641, China
| | - Xiaofeng Li
- School of Food Science and Engineering, South China University of Technology, Guangzhou 510644, China
| |
Collapse
|
19
|
Salado M, Lanceros-Mendez S, Lizundia E. Free-standing intrinsically conducting polymer membranes based on cellulose and poly(vinylidene fluoride) for energy storage applications. Eur Polym J 2021. [DOI: 10.1016/j.eurpolymj.2020.110240] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
20
|
Modification of polystyrene maleic anhydride for efficient energy storage applications. J Solid State Electrochem 2020. [DOI: 10.1007/s10008-020-04797-7] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
21
|
|
22
|
Zhu Y, Yao L, Liu Z, Weng W, Cheng K. Electrical Potential Specified Release of BSA/Hep/Polypyrrole Composite Film and Its Cellular Responses. ACS APPLIED MATERIALS & INTERFACES 2019; 11:25457-25464. [PMID: 31282143 DOI: 10.1021/acsami.9b09333] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
A facile strategy is needed for accurate time-space supply of suitable growth factors or drugs. Polypyrrole (PPy) was able to carry almost all kinds of negatively charged biomolecules through anodizing method, which made it an appropriate way for codeposition of multiple molecules. The difference in the conjugation between different molecules and PPy makes it possible for selective release when the redox state of PPy changes. In this work, bovine serum albumin (BSA) and heparin (Hep) were chosen to be the model molecules in view of their differences in the level of electronegativity and molecular weight. Double-layer deposition method was used to improve the biocompatibility of PPy/BSA/Hep film. It was found the content of BSA and Hep in the film can be controlled by regulating deposition current and time. BSA release was facilitated under positive voltage and then promote the proliferation of preosteoblasts, while Hep release was promoted under negative voltage and enhance cell differentiation. Our work provides a dual-molecule model in PPy for selective release and further explores the mechanism of release selectivity, this discovery has potential applications in tissue engineering and regenerative medicine.
Collapse
Affiliation(s)
- Yifei Zhu
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications , Zhejiang University , Hangzhou 310027 , China
| | - Lili Yao
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications , Zhejiang University , Hangzhou 310027 , China
| | - Zongguang Liu
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications , Zhejiang University , Hangzhou 310027 , China
| | - Wenjian Weng
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications , Zhejiang University , Hangzhou 310027 , China
| | - Kui Cheng
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications , Zhejiang University , Hangzhou 310027 , China
| |
Collapse
|
23
|
A Review on Biomaterials for 3D Conductive Scaffolds for Stimulating and Monitoring Cellular Activities. APPLIED SCIENCES-BASEL 2019. [DOI: 10.3390/app9050961] [Citation(s) in RCA: 31] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
During the last years, scientific research in biotechnology has been reporting a considerable boost forward due to many advances marked in different technological areas. Researchers working in the field of regenerative medicine, mechanobiology and pharmacology have been constantly looking for non-invasive methods able to track tissue development, monitor biological processes and check effectiveness in treatments. The possibility to control cell cultures and quantify their products represents indeed one of the most promising and exciting hurdles. In this perspective, the use of conductive materials able to map cell activity in a three-dimensional environment represents the most interesting approach. The greatest potential of this strategy relies on the possibility to correlate measurable changes in electrical parameters with specific cell cycle events, without affecting their maturation process and considering a physiological-like setting. Up to now, several conductive materials has been identified and validated as possible solutions in scaffold development, but still few works have stressed the possibility to use conductive scaffolds for non-invasive electrical cell monitoring. In this picture, the main objective of this review was to define the state-of-the-art concerning conductive biomaterials to provide researchers with practical guidelines for developing specific applications addressing cell growth and differentiation monitoring. Therefore, a comprehensive review of all the available conductive biomaterials (polymers, carbon-based, and metals) was given in terms of their main electric characteristics and range of applications.
Collapse
|
24
|
da Silva FAG, Alcaraz-Espinoza JJ, da Costa MM, de Oliveira HP. Low intensity electric field inactivation of Gram-positive and Gram-negative bacteria via metal-free polymeric composite. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 99:827-837. [PMID: 30889757 DOI: 10.1016/j.msec.2019.02.027] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/30/2018] [Revised: 02/01/2019] [Accepted: 02/10/2019] [Indexed: 12/30/2022]
Abstract
The adhesion of pathogenic bacteria in medical implants and surfaces is a health-related problem that requires strong inhibition against bacterial growth and attachment. In this work, we have explored the enhancement in the antibacterial activity of metal free-based composites under external electric field. It affects the oxidation degree of polypyrrole-based electrodes and consequently the antibacterial activity of the material. A conductive layer of carbon nanotubes (graphite) was deposited on porous substrate of polyurethane (sandpaper) and covered by polypyrrole, providing highly conductive electrodes characterized by intrinsic antibacterial activity and reinforced by electro-enhanced effect due to the external electric field. The bacterial inhibition of composites was monitored from counting of viable cells at different voltage/time of treatment and determination of biofilm inhibition on electrodes and reactors. The external voltage on electrodes reduces the threshold time for complete bacterial inactivation of PPy-based composites to values in order of 30 min for Staphylococcus aureus and 60 min for Escherichia coli.
Collapse
Affiliation(s)
- Fernando A G da Silva
- Institute of Materials Science, Federal University of Sao Francisco Valley, 48920-310 Juazeiro, BA, Brazil
| | | | - Mateus M da Costa
- Institute of Materials Science, Federal University of Sao Francisco Valley, 48920-310 Juazeiro, BA, Brazil
| | - Helinando P de Oliveira
- Institute of Materials Science, Federal University of Sao Francisco Valley, 48920-310 Juazeiro, BA, Brazil.
| |
Collapse
|
25
|
Chakraborty R, Seesala VS, Manna JS, Saha P, Dhara S. Synthesis, characterization and cytocompatibility assessment of hydroxyapatite-polypyrrole composite coating synthesized through pulsed reverse electrochemical deposition. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 94:597-607. [PMID: 30423745 DOI: 10.1016/j.msec.2018.10.001] [Citation(s) in RCA: 23] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2018] [Revised: 09/13/2018] [Accepted: 10/01/2018] [Indexed: 01/12/2023]
Abstract
Composite coating of hydroxyapatite-polypyrrole is synthesized with the help of pulsed reverse electrochemical deposition method from aqueous bath through in-situ formation and co-deposition of both phases simultaneously over metallic stainless steel surface. The inter phase bonding along with surface energy variation and morphology is tuned with the help of deposition current density, deposition time and reverse duty cycle. Hydroxyapatite (HA) lattice exhibits unidirectional growth along the highest atomic plane of 〈111〉 parallel to the coating surface. Different kind of deposited hydroxyapatite structures, namely lamellar and spherical particle scaffold, are observed at moderate and high current densities respectively together with the incorporation of polypyrrole (PPy) phase in between. Pyrrole ring stretching and bond strengthening represent the bonding with hydroxyapatite lattice, which in turn helps to increase the overall corrosion resistance of composite coating by ten-fold as compared to bare PPY coating. The coating deposited with moderate current density (10 mA/cm2) seems to be the optimum one regarding the faster-interconnected growth of MG63 cells over the coating surface along with highest corrosion resistance and anodic passivation capability. Presence of sub-micron level ceramic hydroxyapatite scaffold along with polymer filler material makes this composite biocompatible coating as a potential candidate to use over the load bearing metallic implant surfaces due to its sufficient elasticity along with superior toughness.
Collapse
Affiliation(s)
- Rajib Chakraborty
- Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India.
| | - Venkata S Seesala
- School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Jhimli Sarkar Manna
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Partha Saha
- Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Santanu Dhara
- School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| |
Collapse
|
26
|
Rocha I, Hattori Y, Diniz M, Mihranyan A, Strømme M, Lindh J. Spectroscopic and Physicochemical Characterization of Sulfonated Cladophora Cellulose Beads. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:11121-11125. [PMID: 30169040 DOI: 10.1021/acs.langmuir.8b01704] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
The work presents a full physicochemical characterization of sulfonated cellulose beads prepared from Cladophora nanocellulose intended for use in biological systems. 2,3-Dialdehyde cellulose (DAC) beads were sulfonated, and transformation of up to 50% of the aldehyde groups was achieved, resulting in highly charged and porous materials compared to the compact surface of the DAC beads. The porosity could be tailored by adjusting the degree of sulfonation, and a subsequent reduction of the aldehyde groups to hydroxyl groups maintained the bead structure without considerable alteration of the surface properties. The thermal stability of the DAC beads was significantly increased with the sulfonation and reduction reactions. Raman spectroscopy also showed to be a useful technique for the characterization of sulfonated cellulose materials.
Collapse
Affiliation(s)
- Igor Rocha
- CAPES Foundation, Ministry of Education of Brazil , Brasília DF 70040-020 , Brazil
| | | | | | | | | | | |
Collapse
|
27
|
Hydrogel Scaffolds: Towards Restitution of Ischemic Stroke-Injured Brain. Transl Stroke Res 2018; 10:1-18. [DOI: 10.1007/s12975-018-0655-6] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2018] [Revised: 05/17/2018] [Accepted: 08/19/2018] [Indexed: 12/27/2022]
|
28
|
Abouzeid RE, Khiari R, El-Wakil N, Dufresne A. Current State and New Trends in the Use of Cellulose Nanomaterials for Wastewater Treatment. Biomacromolecules 2018; 20:573-597. [PMID: 30020778 DOI: 10.1021/acs.biomac.8b00839] [Citation(s) in RCA: 106] [Impact Index Per Article: 17.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
Abstract
Nanotechnology has been identified as having great potential for improving the efficiency of water prevention and purification while reducing costs. In this field, two applications of nanocellulose have generated attention and have proven to be a sound strategy as an adsorbent and as a membrane for the removal of contaminants. This potential is attributed to its high aspect ratio, high specific surface area, high capacity retention, and environmental inertness. In addition to the aforementioned advantages, the presence of active sites allows the incorporation of chemical moieties that may enhance the binding efficiency of pollutants to the surface. This review paper intends to understand how nanocellulose affects the adsorption behavior of water pollutants, e.g., heavy metal ions, microbes, dyes, and organic molecules, and is divided in two parts. First, a general overview of the different strategies for the preparation of nanocellulose is described, and its specific properties are reported. The second section reports some of its application as adsorbent nanomaterial or separation membrane. It appears that the use of nanocellulose for these applications is very promising for wastewater treatment industries.
Collapse
Affiliation(s)
- Ragab E Abouzeid
- Cellulose and Paper Department , National Research Centre , 33 El-Behouth Street , Dokki 12622 , Egypt.,Université Grenoble Alpes, CNRS , Grenoble INP, LGP2 , F-38000 Grenoble , France
| | - Ramzi Khiari
- Université Grenoble Alpes, CNRS , Grenoble INP, LGP2 , F-38000 Grenoble , France.,University of Monastir, Faculty of Sciences , UR13 ES 63-Research Unity of Applied Chemistry & Environment , 5000 Monastir , Tunisia.,Higher Institute of Technological Studies of Ksar Hellal , Department of Textile , 5070 Monastir , Tunisia
| | - Nahla El-Wakil
- Cellulose and Paper Department , National Research Centre , 33 El-Behouth Street , Dokki 12622 , Egypt
| | - Alain Dufresne
- Université Grenoble Alpes, CNRS , Grenoble INP, LGP2 , F-38000 Grenoble , France
| |
Collapse
|
29
|
Asad M, Saba N, Asiri AM, Jawaid M, Indarti E, Wanrosli W. Preparation and characterization of nanocomposite films from oil palm pulp nanocellulose/poly (Vinyl alcohol) by casting method. Carbohydr Polym 2018; 191:103-111. [DOI: 10.1016/j.carbpol.2018.03.015] [Citation(s) in RCA: 47] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2017] [Revised: 02/20/2018] [Accepted: 03/09/2018] [Indexed: 10/17/2022]
|
30
|
Abstract
Sulfonated cellulose beads were prepared by oxidation of Cladophora nanocellulose to 2,3-dialdehyde cellulose followed by sulfonation using bisulfite. The physicochemical properties of the sulfonated beads, i.e., high surface area, high degree of oxidation, spherical shape, and the possibility of tailoring the porosity, make them interesting candidates for the development of immunosorbent platforms, including their application in extracorporeal blood treatments. A desired property for materials used in such applications is blood compatibility; therefore in the present work, we investigate the hemocompatibility of the sulfonated cellulose beads using an in vitro whole blood model. Complement system activation (C3a and sC5b-9 levels), coagulation activation (thrombin-antithrombin (TAT) levels) and hemolysis were evaluated after whole blood contact with the sulfonated beads and the results were compared with the values obtained with the unmodified Cladophora nanocellulose. Results showed that neither of the cellulosic materials presented hemolytic activity. A marked decrease in TAT levels was observed after blood contact with the sulfonated beads, compared with Cladophora nanocellulose. However, the chemical modification did not promote an improvement in Cladophora nanocellulose hemocompatibility in terms of complement system activation. Even though the sulfonated beads presented a significant reduction in pro-coagulant activity compared with the unmodified material, further modification strategies need to be investigated to control the complement activation by the cellulosic materials.
Collapse
|
31
|
Xue Y, Mou Z, Xiao H. Nanocellulose as a sustainable biomass material: structure, properties, present status and future prospects in biomedical applications. NANOSCALE 2017; 9:14758-14781. [PMID: 28967940 DOI: 10.1039/c7nr04994c] [Citation(s) in RCA: 97] [Impact Index Per Article: 13.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
Nanocellulose, extracted from the most abundant biomass material cellulose, has proved to be an environmentally friendly material with excellent mechanical performance owing to its unique nano-scaled structure, and has been used in a variety of applications as engineering and functional materials. The great biocompatibility and biodegradability, in particular, render nanocellulose promising in biomedical applications. In this review, the structure, treatment technology and properties of three different nanocellulose categories, i.e., nanofibrillated cellulose (NFC), nanocrystalline cellulose (NCC) and bacterial nanocellulose (BNC), are introduced and compared. The cytotoxicity, biocompatibility and frontier applications in biomedicine of the three nanocellulose categories were the focus and are detailed in each section. Future prospects concerning the cytotoxicity, applications and industrial production of nanocellulose are also discussed in the last section.
Collapse
Affiliation(s)
- Yan Xue
- School of Chemistry and Chemical Engineering, Oil & Gas Field Applied Chemistry Key Laboratory of Sichuan Province, Southwest Petroleum University, Chengdu 610500, China.
| | | | | |
Collapse
|
32
|
Mondal S. Preparation, properties and applications of nanocellulosic materials. Carbohydr Polym 2017; 163:301-316. [DOI: 10.1016/j.carbpol.2016.12.050] [Citation(s) in RCA: 165] [Impact Index Per Article: 23.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2016] [Revised: 12/17/2016] [Accepted: 12/20/2016] [Indexed: 10/20/2022]
|
33
|
Dong SL, Han L, Du CX, Wang XY, Li LH, Wei Y. 3D Printing of Aniline Tetramer-Grafted-Polyethylenimine and Pluronic F127 Composites for Electroactive Scaffolds. Macromol Rapid Commun 2017; 38. [PMID: 28045217 DOI: 10.1002/marc.201600551] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2016] [Revised: 10/31/2016] [Indexed: 11/09/2022]
Abstract
Electroactive hydrogel scaffolds are fabricated by the 3D-printing technique using composites of 30% Pluronic F127 and aniline tetramer-grafted-polyethylenimine (AT-PEI) copolymers with various contents from 2.5% to 10%. The synthesized AT-PEI copolymers can self-assemble into nanoparticles with the diameter of ≈50 nm and display excellent electroactivity due to AT conjugation. The copolymers are then homogeneously distributed into 30% Pluronic F127 solution by virtue of the thermosensitivity of F127, denoted as F/AT-PEI composites. Macroscopic photographs of latticed scaffolds elucidate their excellent printability of F/AT-PEI hydrogels for the 3D-printing technique. The conductivities of the printed F/AT-PEI scaffolds are all higher than 2.0 × 10-3 S cm-1 , which are significantly improved compared with that of F127 scaffold with only 0.94 × 10-3 S cm-1 . Thus, the F/AT-PEI scaffolds can be considered as candidates for application in electrical stimulation of tissue regeneration such as repair of muscle and cardiac nerve tissue.
Collapse
Affiliation(s)
- Shi-Lei Dong
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China
| | - Lu Han
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China
| | - Cai-Xia Du
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China
| | - Xiao-Yu Wang
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China
| | - Lu-Hai Li
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China
| | - Yen Wei
- Beijing Engineering Research Center of Printed Electronics, Beijing Institute of Graphic Communication, Beijing, 102600, China.,Department of Chemistry and Key Laboratory of Bioorganic Phosphorus Chemistry and Chemical Biology (Ministry of Education), Tsinghua University, Beijing, 100084, China
| |
Collapse
|
34
|
Electrodeposition of Ag nanoparticles on conductive polyaniline/cellulose aerogels with increased synergistic effect for energy storage. Carbohydr Polym 2017; 156:19-25. [DOI: 10.1016/j.carbpol.2016.09.005] [Citation(s) in RCA: 65] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2016] [Revised: 07/09/2016] [Accepted: 09/02/2016] [Indexed: 11/22/2022]
|
35
|
Gardella L, Colonna S, Fina A, Monticelli O. A Novel Electrostimulated Drug Delivery System Based on PLLA Composites Exploiting the Multiple Functions of Graphite Nanoplatelets. ACS APPLIED MATERIALS & INTERFACES 2016; 8:24909-17. [PMID: 27581486 PMCID: PMC5084066 DOI: 10.1021/acsami.6b08808] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2016] [Accepted: 09/01/2016] [Indexed: 05/29/2023]
Abstract
A novel drug delivery system based on poly(l-lactide) (PLLA), graphite, and porphyrin was developed. In particular, 5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin (THPP) was chosen because, besides its potential as codispersing agent of graphite, it is a pharmacologically active molecule. Graphite nanoplatelets, homogeneously dispersed in both the neat PLLA and the PLLA/porphyrin films, which were prepared by solution casting, turned out to improve the crystallinity of the polymer. Moreover, IR measurements demonstrated that unlike PLLA/porphyrin film, where the porphyrin was prone to aggregate causing variable concentration throughout the sample, the system containing also GNP was characterized by a homogeneous dispersion of the above molecule. The effect of graphite nanoplatelets on the thermal stabilization, electrical conductivity, and improvement of mechanical properties of the polymer resulted to be increased by the addition of the porphyrin to the system, thus demonstrating the role of the molecule in ameliorating the filler dispersion in PLLA. The porphyrin release from the composite film, occurring both naturally and with the application of an electrical field, was measured using an UV-vis spectrophotometer. Indeed, voltage application turned out to improve significantly the kinetic of drug release. The biocompatibility of the polymer matrix as well as the mechanical and thermal properties of the composite together with its electrical response makes the developed material extremely promising in biological applications, particularly in the drug delivery field.
Collapse
Affiliation(s)
- Lorenza Gardella
- Dipartimento
di Chimica e Chimica Industriale, Università
di Genova, Via Dodecaneso,
31, 16146 Genova, Italy
| | - Samuele Colonna
- Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino-sede di Alessandria, viale Teresa Michel, 5, 15121 Alessandria, Italy
| | - Alberto Fina
- Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino-sede di Alessandria, viale Teresa Michel, 5, 15121 Alessandria, Italy
| | - Orietta Monticelli
- Dipartimento
di Chimica e Chimica Industriale, Università
di Genova, Via Dodecaneso,
31, 16146 Genova, Italy
| |
Collapse
|
36
|
Hua K, Rocha I, Zhang P, Gustafsson S, Ning Y, Strømme M, Mihranyan A, Ferraz N. Transition from Bioinert to Bioactive Material by Tailoring the Biological Cell Response to Carboxylated Nanocellulose. Biomacromolecules 2016; 17:1224-33. [PMID: 26886265 DOI: 10.1021/acs.biomac.6b00053] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
This work presents an insight into the relationship between cell response and physicochemical properties of Cladophora cellulose (CC) by investigating the effect of CC functional group density on the response of model cell lines. CC was carboxylated by electrochemical TEMPO-mediated oxidation. By varying the amount of charge passed through the electrolysis setup, CC materials with different degrees of oxidation were obtained. The effect of carboxyl group density on the material's physicochemical properties was investigated together with the response of human dermal fibroblasts (hDF) and human osteoblastic cells (Saos-2) to the carboxylated CC films. The introduction of carboxyl groups resulted in CC films with decreased specific surface area and smaller total pore volume compared with the unmodified CC (u-CC). While u-CC films presented a porous network of randomly oriented fibers, a compact and aligned fiber pattern was depicted for the carboxylated-CC films. The decrease in surface area and total pore volume, and the orientation and aggregation of the fibers tended to augment parallel to the increase in the carboxyl group density. hDF and Saos-2 cells presented poor cell adhesion and spreading on u-CC, which gradually increased for the carboxylated CC as the degree of oxidation increased. It was found that a threshold value in carboxyl group density needs be reached to obtain a carboxylated-CC film with cytocompatibility comparable to commercial tissue culture material. Hence, this study demonstrates that a normally bioinert nanomaterial can be rendered bioactive by carefully tuning the density of charged groups on the material surface, a finding that not only may contribute to the fundamental understanding of biointerface phenomena, but also to the development of bioinert/bioactive materials.
Collapse
Affiliation(s)
- Kai Hua
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Igor Rocha
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden.,CAPES Foundation, Ministry of Education of Brazil, Brasília - DF 70040-020, Brazil
| | - Peng Zhang
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Simon Gustafsson
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Yi Ning
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Maria Strømme
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Albert Mihranyan
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| | - Natalia Ferraz
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University , Box 534, 75121, Uppsala, Sweden
| |
Collapse
|
37
|
Zhao MD, Björninen M, Cao L, Wang HR, Pelto J, Li XQ, Hyttinen J, Jiang YQ, Kellomäki M, Miettinen S, Sándor GK, Seppänen R, Haimi S, Dong J. Polypyrrole coating on poly-(lactide/glycolide)-
β
-tricalcium phosphate screws enhances new bone formation in rabbits. Biomed Mater 2015; 10:065016. [DOI: 10.1088/1748-6041/10/6/065016] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
38
|
Asper M, Hanrieder T, Quellmalz A, Mihranyan A. Removal of xenotropic murine leukemia virus by nanocellulose based filter paper. Biologicals 2015; 43:452-6. [DOI: 10.1016/j.biologicals.2015.08.001] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2015] [Revised: 07/30/2015] [Accepted: 08/05/2015] [Indexed: 10/23/2022] Open
|
39
|
|
40
|
Lee JE, Shim HW, Kwon OS, Huh YI, Yoon H. Real-time detection of metal ions using conjugated polymer composite papers. Analyst 2015; 139:4466-75. [PMID: 25068513 DOI: 10.1039/c4an00804a] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Cellulose, a natural polymeric material, has widespread technical applications because of its inherent structural rigidity and high surface area. As a conjugated polymer, polypyrrole shows practical potential for a diverse and promising range of future technologies. Here, we demonstrate a strategy for the real-time detection and removal of metal ions with polypyrrole/cellulose (PPCL) composite papers in solution. Simply, the conjugated polymer papers had different chemical/physical properties by applying different potentials to them, which resulted in differentiable response patterns and adsorption efficiencies for individual metal ions. First, large-area PPCL papers with a diameter of 5 cm were readily obtained via vapor deposition polymerization. The papers exhibited both mechanical flexibility and robustness, in which polypyrrole retained its redox property perfectly. The ability of the PPCL papers to recognize metal ions was examined in static and flow cells, in which real-time current change was monitored at five different applied potentials (+1, +0.5, 0, -0.5, and -1 V vs. Ag/AgCl). Distinguishable signals in the PPCL paper responses were observed for individual metal ions through principal component analysis. Particularly, the PPCL papers yielded unique signatures for three metal ions, Hg(ii), Ag(i), and Cr(iii), even in a real sample, groundwater. The sorption of metal ions by PPCL papers was examined in the flow system. The PPCL papers had a greatly superior adsorption efficiency for Hg(ii) compared to that of the other metal ions. With the strong demand for the development of inexpensive, flexible, light-weight, and environmentally friendly devices, the fascinating characteristics of these PPCL papers are likely to provide good opportunities for low-cost paper-based flexible or wearable devices.
Collapse
Affiliation(s)
- Ji Eun Lee
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 500-757, South Korea.
| | | | | | | | | |
Collapse
|
41
|
Quellmalz A, Mihranyan A. Citric Acid Cross-Linked Nanocellulose-Based Paper for Size-Exclusion Nanofiltration. ACS Biomater Sci Eng 2015; 1:271-276. [PMID: 33435050 DOI: 10.1021/ab500161x] [Citation(s) in RCA: 48] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Abstract
This article explores the effect of cross-linking of nanocellulose with citric acid for the development of novel paper filters for potential application within nanofiltration, including sterile (virus) filtration. Cladophora cellulose paper sheets were cross-linked by first soaking in 16 wt % citric acid in the presence of 1 wt % sodium hypophosphate overnight and then curing at 160 °C for 10 min in a hot-press. The cross-linked paper filter samples were then characterized with FTIR, AFM, N2 gas adsorption, and tensile strength analysis (dry and wet strength). The particle retention properties were further studied with respect to filtering of 20 nm Au nanoparticles with SEM and comparing the UV absorbance intensity of the starting solution and the filtrate. The wet strength of the paper filter was greatly improved following the cross-linking, although in the dry state, the paper becomes brittle. The improved wet strength of the paper filter enables increasing the pressure gradient applied for filtration without compromising the integrity of the filter. This is the first report in which a fully nature-derived paper filter is capable of removing tracer particles as small as 20 nm. It is concluded that citric acid cross-linking of nanocellulose is beneficial for developing paper based sterile (virus) removal industrial filters.
Collapse
Affiliation(s)
- Arne Quellmalz
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University, Box 534, 75121 Uppsala, Sweden
| | - Albert Mihranyan
- Nanotechnology and Functional Materials, Department of Engineering Sciences, Uppsala University, Box 534, 75121 Uppsala, Sweden
| |
Collapse
|
42
|
Kaur G, Adhikari R, Cass P, Bown M, Gunatillake P. Electrically conductive polymers and composites for biomedical applications. RSC Adv 2015. [DOI: 10.1039/c5ra01851j] [Citation(s) in RCA: 510] [Impact Index Per Article: 56.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
Abstract
This paper provides a review of the recent advances made in the field of electroactive polymers and composites for biomedical applications.
Collapse
Affiliation(s)
- Gagan Kaur
- CSIRO Manufacturing Flagship
- Clayton
- Australia
| | | | - Peter Cass
- CSIRO Manufacturing Flagship
- Clayton
- Australia
| | - Mark Bown
- CSIRO Manufacturing Flagship
- Clayton
- Australia
| | | |
Collapse
|
43
|
|
44
|
Metreveli G, Wågberg L, Emmoth E, Belák S, Strømme M, Mihranyan A. A size-exclusion nanocellulose filter paper for virus removal. Adv Healthc Mater 2014; 3:1546-50, 1524. [PMID: 24687994 DOI: 10.1002/adhm.201300641] [Citation(s) in RCA: 153] [Impact Index Per Article: 15.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2013] [Revised: 01/17/2014] [Indexed: 11/05/2022]
Abstract
This is the first time a 100% natural, unmodified nanofibrous polymer-based membrane is demonstrated capable of removing viruses solely based on the size-exclusion principle, with a log10 reduction value (LRV) ≥ 6.3 as limited by the assay lower detection limit and the feed virus titre, thereby matching the performance of industrial synthetic polymer virus removal filters.
Collapse
Affiliation(s)
- Giorgi Metreveli
- Department of Biomedical Sciences and Veterinary Public Health Swedish University of Agricultural Sciences Box 7036 750 07 Uppsala Sweden
| | - Linus Wågberg
- Nanotechnology and Functional Materials Department of Engineering Sciences Box 534, Uppsala University 75121 Uppsala Sweden
| | - Eva Emmoth
- Unit of Virology Immunobiology and Parasitology The National Veterinary Institute (SVA) 751 89 Uppsala Sweden
| | - Sándor Belák
- Unit of Virology Immunobiology and Parasitology The National Veterinary Institute (SVA) 751 89 Uppsala Sweden
| | - Maria Strømme
- Nanotechnology and Functional Materials Department of Engineering Sciences Box 534, Uppsala University 75121 Uppsala Sweden
| | - Albert Mihranyan
- Division of Materials Science Luleå University of Technology 971 87 Luleå Sweden
- Nanotechnology and Functional Materials Department of Engineering Sciences Box 534, Uppsala University 75121 Uppsala Sweden
| |
Collapse
|
45
|
Bober P, Liu J, Mikkonen KS, Ihalainen P, Pesonen M, Plumed-Ferrer C, von Wright A, Lindfors T, Xu C, Latonen RM. Biocomposites of Nanofibrillated Cellulose, Polypyrrole, and Silver Nanoparticles with Electroconductive and Antimicrobial Properties. Biomacromolecules 2014; 15:3655-63. [DOI: 10.1021/bm500939x] [Citation(s) in RCA: 90] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
Affiliation(s)
- Patrycja Bober
- Institute
of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, 162 06 Prague 6, Czech Republic
| | | | - Kirsi S. Mikkonen
- Department
of Food and Environmental Sciences, University of Helsinki, FI-00014, Helsinki, Finland
| | | | | | - Carme Plumed-Ferrer
- Institute
of Public Health and Clinical Nutrition, University of Eastern Finland, FI-70211, Kuopio, Finland
| | - Atte von Wright
- Institute
of Public Health and Clinical Nutrition, University of Eastern Finland, FI-70211, Kuopio, Finland
| | - Tom Lindfors
- Academy of Finland, Hakaniemenranta
6, POB 131, FI-00531 Helsinki, Finland
| | | | | |
Collapse
|
46
|
Balint R, Cassidy NJ, Cartmell SH. Conductive polymers: towards a smart biomaterial for tissue engineering. Acta Biomater 2014; 10:2341-53. [PMID: 24556448 DOI: 10.1016/j.actbio.2014.02.015] [Citation(s) in RCA: 871] [Impact Index Per Article: 87.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2013] [Revised: 02/07/2014] [Accepted: 02/10/2014] [Indexed: 01/03/2023]
Abstract
Developing stimulus-responsive biomaterials with easy-to-tailor properties is a highly desired goal of the tissue engineering community. A novel type of electroactive biomaterial, the conductive polymer, promises to become one such material. Conductive polymers are already used in fuel cells, computer displays and microsurgical tools, and are now finding applications in the field of biomaterials. These versatile polymers can be synthesised alone, as hydrogels, combined into composites or electrospun into microfibres. They can be created to be biocompatible and biodegradable. Their physical properties can easily be optimized for a specific application through binding biologically important molecules into the polymer using one of the many available methods for their functionalization. Their conductive nature allows cells or tissue cultured upon them to be stimulated, the polymers' own physical properties to be influenced post-synthesis and the drugs bound in them released, through the application of an electrical signal. It is thus little wonder that these polymers are becoming very important materials for biosensors, neural implants, drug delivery devices and tissue engineering scaffolds. Focusing mainly on polypyrrole, polyaniline and poly(3,4-ethylenedioxythiophene), we review conductive polymers from the perspective of tissue engineering. The basic properties of conductive polymers, their chemical and electrochemical synthesis, the phenomena underlying their conductivity and the ways to tailor their properties (functionalization, composites, etc.) are discussed.
Collapse
|
47
|
Ferraz N, Mihranyan A. Is there a future for electrochemically assisted hemodialysis? Focus on the application of polypyrrole–nanocellulose composites. Nanomedicine (Lond) 2014; 9:1095-110. [DOI: 10.2217/nnm.14.49] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
Abstract
This work summarizes the various aspects of using electrochemically assisted solute removal techniques in hemodialysis with a focus on blood electrodialysis and electrochemically controlled uremic retention solute removal using polypyrrole. In particular, the feasibility of using highly porous conductive polypyrrole–Cladophora cellulose membranes for hemodialysis are overviewed as a part of our dedicated research efforts during the past 4 years. The potential benefits and the current limitations associated with using the electrochemically controlled uremic retention solute removal techniques are discussed in detail.
Collapse
Affiliation(s)
- Natalia Ferraz
- Nanotechnology & Functional Materials, Department of Engineering Sciences, Box 534, Uppsala University, 75121 Uppsala, Sweden
| | - Albert Mihranyan
- Nanotechnology & Functional Materials, Department of Engineering Sciences, Box 534, Uppsala University, 75121 Uppsala, Sweden
- Division of Materials Science, Luleå University of Technology, 97187 Luleå, Sweden
| |
Collapse
|
48
|
Moral-Vico J, Sánchez-Redondo S, Lichtenstein MP, Suñol C, Casañ-Pastor N. Nanocomposites of iridium oxide and conducting polymers as electroactive phases in biological media. Acta Biomater 2014; 10:2177-86. [PMID: 24394636 DOI: 10.1016/j.actbio.2013.12.051] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2013] [Revised: 12/11/2013] [Accepted: 12/26/2013] [Indexed: 11/16/2022]
Abstract
Much effort is currently devoted to implementing new materials in electrodes that will be used in the central nervous system, either for functional electrostimulation or for tests on nerve regeneration. Their main aim is to improve the charge capacity of the electrodes, while preventing damaging secondary reactions, such as peroxide formation, occurring while applying the electric field. Thus, hybrids may represent a new generation of materials. Two novel hybrid materials are synthesized using three known biocompatible materials tested in the neural system: polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT) and iridium oxide (IrO2). In particular, PPy-IrO2 and PEDOT-IrO2 hybrid nanocomposite materials are prepared by chemical polymerization in hydrothermal conditions, using IrO2 as oxidizing agent. The reaction yields a significant ordered new hybrid where the conducting polymer is formed around the IrO2 nanoparticles, encapsulating them. Scanning electron microscopy and backscattering techniques show the extent of the encapsulation. Both X-ray photoelectron and Fourier transform infrared spectroscopies identify the components of the phases, as well as the absence of impurities. Electrochemical properties of the final phases in powder and pellet form are evaluated by cyclic voltammetry. Biocompatibility is tested with MTT toxicity tests using primary cultures of cortical neurons grown in vitro for 6 and 9days.
Collapse
Affiliation(s)
- J Moral-Vico
- Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus de la UAB, E-08193, Bellaterra, Barcelona, Spain.
| | - S Sánchez-Redondo
- Institut d'Investigacions Biomèdiques de Barcelona (IIBB-CSIC), Institut d'Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), CIBER de Epidemiología y Salud Pública (CIBERESP), Barcelona, Spain
| | - M P Lichtenstein
- Institut d'Investigacions Biomèdiques de Barcelona (IIBB-CSIC), Institut d'Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), CIBER de Epidemiología y Salud Pública (CIBERESP), Barcelona, Spain
| | - C Suñol
- Institut d'Investigacions Biomèdiques de Barcelona (IIBB-CSIC), Institut d'Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), CIBER de Epidemiología y Salud Pública (CIBERESP), Barcelona, Spain
| | - N Casañ-Pastor
- Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus de la UAB, E-08193, Bellaterra, Barcelona, Spain
| |
Collapse
|
49
|
Omastová M, Bober P, Morávková Z, Peřinka N, Kaplanová M, Syrový T, Hromádková J, Trchová M, Stejskal J. Towards conducting inks: Polypyrrole–silver colloids. Electrochim Acta 2014. [DOI: 10.1016/j.electacta.2013.11.037] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
50
|
Mbundi L, Gallar-Ayala H, Khan MR, Barber JL, Losada S, Busquets R. Advances in the Analysis of Challenging Food Contaminants. ADVANCES IN MOLECULAR TOXICOLOGY 2014. [DOI: 10.1016/b978-0-444-63406-1.00002-7] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|