Novel In Vitro Platform for Studying the Cell Response to Healthy and Diseased Tendon Matrices

Current in vitro models poorly represent the healthy or diseased tendon microenvironment, limiting the translation of the findings to clinics. The present work aims to establish a physiologically relevant in vitro tendon platform that mimics biophysical aspects of a healthy and tendinopathic tendon matrix using a decellularized bovine tendon and to characterize tendon cells cultured using this platform. Bovine tendons were subjected to various decellularization techniques, with the efficacy of decellularization determined histologically. The biomechanical and architectural properties of the decellularized tendons were characterized using an atomic force microscope. Tendinopathy-mimicking matrices were prepared by treating the decellularized tendons with collagenase for 3 h or collagenase-chondroitinase (CC) for 1 h. The tendon tissue collected from healthy and tendinopathic patients was characterized using an atomic force microscope and compared to that of decellularized matrices. Healthy human tendon-derived cells (hTDCs) from the hamstring tendon were cultured on the decellularized matrices for 24 or 48 h, with cell morphology characterized using f-actin staining and gene expression characterized using real-time PCR. Tendon matrices prepared by freeze-thawing and 48 h nuclease treatment were fully decellularized, and the aligned structure and tendon stiffness (1.46 MPa) were maintained. Collagenase treatment prepared matrices with a disorganized architecture and reduced stiffness (0.75 MPa), mimicking chronic tendinopathy. Treatment with CC prepared matrices with a disorganized architecture without altering stiffness, mimicking early tendinopathy (1.52 MPa). hTDCs on a healthy tendon matrix were elongated, and the scleraxis (SCX) expression was maintained. On tendinopathic matrices, hTDCs had altered morphological characteristics and lower SCX expression. The expression of genes related to actin polymerization, matrix degradation and remodeling, and immune cell invasion were higher in hTDCs on tendinopathic matrices. Overall, the present study developed a physiological in vitro system to mimic healthy tendons and early and late tendinopathy, and it can be used to better understand tendon cell characteristics in healthy and diseased states.

Tannic Acid-Modified Decellularized Tendon Scaffold with Antioxidant and Anti-Inflammatory Activities for Tendon Regeneration

Tendon regeneration is greatly influenced by the oxidant and the inflammatory microenvironment. Persistent inflammation during the tendon repair can cause matrix degradation, tendon adhesion, and excessive accumulation of reactive oxygen species (ROS), while excessive ROS affect extracellular matrix remodeling and tendon integration. Herein, we used tannic acid (TA) to modify a decellularized tendon slice (DTS) to fabricate a functional scaffold (DTS-TA) with antioxidant and anti-inflammatory properties for tendon repair. The characterizations and cytocompatibility of the scaffolds were examined in vitro. The antioxidant and anti-inflammatory activities of the scaffold were evaluated in vitro and further studied in vivo using a subcutaneous implantation model. It was found that the modified DTS combined with TA via hydrogen bonds and covalent bonds, and the hydrophilicity, thermal stability, biodegradability, and mechanical characteristics of the scaffold were significantly improved. Afterward, the results demonstrated that DTS-TA could effectively reduce inflammation by increasing the M2/M1 macrophage ratio and interleukin-4 (IL-4) expression, decreasing the secretion of interleukin-6 (IL-6) and interleukin-1β (IL-1β), as well as scavenging excessive ROS in vitro and in vivo. In summary, DTS modified with TA provides a potential versatile scaffold for tendon regeneration.

Dual-Targeted Metal Ion Network Hydrogel Scaffold for Promoting the Integrated Repair of Tendon-Bone Interfaces

The tendon-bone interface has a complex gradient structure vital for stress transmission and pressure buffering during movement. However, injury to the gradient tissue, especially the tendon and cartilage components, often hinders the complete restoration of the original structure. Here, a metal ion network hydrogel scaffold, with the capability of targeting multitissue, was constructed through the photopolymerization of the LHERHLNNN peptide-modified zeolitic imidazolate framework-8 (LZIF-8) and the WYRGRL peptide-modified magnesium metal-organic framework (WMg-MOF) within the hydrogel scaffold, which could facilitate the directional migration of metal ions to form a dynamic gradient, thereby achieving integrated regeneration of gradient tissues. LZIF-8 selectively migrated to the tendon, releasing zinc ions to enhance collagen secretion and promoting tendon repair. Simultaneously, WMg-MOF migrated to cartilage, releasing magnesium ions to induce cell differentiation and facilitating cartilage regeneration. Infrared spectroscopy confirmed successful peptide modification of nano ZIF-8 and Mg-MOF. Fluorescence imaging validated that LZIF-8/WMg-MOF had a longer retention, indirectly confirming their successful targeting of the tendon-bone interface. In summary, this dual-targeted metal ion network hydrogel scaffold has the potential to facilitate synchronized multitissue regeneration at the compromised tendon-bone interface, offering favorable prospects for its application in the integrated reconstruction characterized by the gradient structure.

Decellularized extracellular matrix biomaterials for regenerative therapies: Advances, challenges and clinical prospects

Tissue engineering and regenerative medicine have shown potential in the repair and regeneration of tissues and organs via the use of engineered biomaterials and scaffolds. However, current constructs face limitations in replicating the intricate native microenvironment and achieving optimal regenerative capacity and functional recovery. To address these challenges, the utilization of decellularized tissues and cell-derived extracellular matrix (ECM) has emerged as a promising approach. These biocompatible and bioactive biomaterials can be engineered into porous scaffolds and grafts that mimic the structural and compositional aspects of the native tissue or organ microenvironment, both in vitro and in vivo. Bioactive dECM materials provide a unique tissue-specific microenvironment that can regulate and guide cellular processes, thereby enhancing regenerative therapies. In this review, we explore the emerging frontiers of decellularized tissue-derived and cell-derived biomaterials and bio-inks in the field of tissue engineering and regenerative medicine. We discuss the need for further improvements in decellularization methods and techniques to retain structural, biological, and physicochemical characteristics of the dECM products in a way to mimic native tissues and organs. This article underscores the potential of dECM biomaterials to stimulate in situ tissue repair through chemotactic effects for the development of growth factor and cell-free tissue engineering strategies. The article also identifies the challenges and opportunities in developing sterilization and preservation methods applicable for decellularized biomaterials and grafts and their translation into clinical products.

Advances focusing on the application of decellularization methods in tendon-bone healing

BACKGROUND

The tendon or ligament is attached to the bone by a triphasic but continuous area of heterogeneous tissue called the tendon-bone interface (TBI). The rapid and functional regeneration of TBI is challenging owing to its complex composition and difficulty in self-healing. The development of new technologies, such as decellularization, has shown promise in the regeneration of TBI. Several ex vivo and in vivo studies have shown that decellularized grafts and decellularized biomaterial scaffolds achieved better efficacy in enhancing TBI healing. However further information on the type of review that is available is needed.

AIM OF THE REVIEW

In this review, we discuss the current application of decellularization biomaterials in promoting TBI healing and the possible mechanisms involved. With this work, we would like to reveal how tissues or biomaterials that have been decellularized can improve tendon-bone healing and to provide a theoretical basis for future related studies.

KEY SCIENTIFIC CONCEPTS OF THE REVIEW

Decellularization is an emerging technology that utilizes various chemical, enzymatic and/or physical strategies to remove cellular components from tissues while retaining the structure and composition of the extracellular matrix (ECM). After decellularization, the cellular components of the tissue that cause an immune response are removed, while various biologically active biofactors are retained. This review further explores how tissues or biomaterials that have been decellularized improve TBI healing.

Advances in tissue engineering and biofabrication for in vitro skin modeling

The global prevalence of skin disease and injury is continually increasing, yet conventional cell-based models used to study these conditions do not accurately reflect the complexity of human skin. The lack of inadequate in vitro modeling has resulted in reliance on animal-based models to test pharmaceuticals, biomedical devices, and industrial and environmental toxins to address clinical needs. These in vivo models are monetarily and morally expensive and are poor predictors of human tissue responses and clinical trial outcomes. The onset of three-dimensional (3D) culture techniques, such as cell-embedded and decellularized approaches, has offered accessible in vitro alternatives, using innovative scaffolds to improve cell-based models' structural and histological authenticity. However, these models lack adequate organizational control and complexity, resulting in variations between structures and the exclusion of physiologically relevant vascular and immunological features. Recently, biofabrication strategies, which combine biology, engineering, and manufacturing capabilities, have emerged as instrumental tools to recreate the heterogeneity of human skin precisely. Bioprinting uses computer-aided design (CAD) to yield robust and reproducible skin prototypes with unprecedented control over tissue design and assembly. As the interdisciplinary nature of biofabrication grows, we look to the promise of next-generation biofabrication technologies, such as organ-on-a-chip (OOAC) and 4D modeling, to simulate human tissue behaviors more reliably for research, pharmaceutical, and regenerative medicine purposes. This review aims to discuss the barriers to developing clinically relevant skin models, describe the evolution of skin-inspired in vitro structures, analyze the current approaches to biofabricating 3D human skin mimetics, and define the opportunities and challenges in biofabricating skin tissue for preclinical and clinical uses.

Evolution of biomimetic ECM scaffolds from decellularized tissue matrix for tissue engineering: A comprehensive review

Tissue engineering is essentially a technique for imitating nature. Natural tissues are made up of three parts: extracellular matrix (ECM), signaling systems, and cells. Therefore, biomimetic ECM scaffold is one of the best candidates for tissue engineering scaffolds. Among the many scaffold materials of biomimetic ECM structure, decellularized ECM scaffolds (dECMs) obtained from natural ECM after acellular treatment stand out because of their inherent natural components and microenvironment. First, an overview of the family of dECMs is provided. The principle, mechanism, advances, and shortfalls of various decellularization technologies, including physical, chemical, and biochemical methods are then critically discussed. Subsequently, a comprehensive review is provided on recent advances in the versatile applications of dECMs including but not limited to decellularized small intestinal submucosa, dermal matrix, amniotic matrix, tendon, vessel, bladder, heart valves. And detailed examples are also drawn from scientific research and practical work. Furthermore, we outline the underlying development directions of dECMs from the perspective that tissue engineering scaffolds play an important role as an important foothold and fulcrum at the intersection of materials and medicine. As scaffolds that have already found diverse applications, dECMs will continue to present both challenges and exciting opportunities for regenerative medicine and tissue engineering.

Decellularized tendon scaffolds loaded with collagen targeted extracellular vesicles from tendon-derived stem cells facilitate tendon regeneration

Stem cell-based treatment of tendon injuries remains to have some inherent issues. Extracellular vesicles derived from stem cells have shown promising achievements in tendon regeneration, though their retention in vivo is low. This study reports on the use of a collagen binding domain (CBD) to bind extracellular vesicles, obtained from tendon-derived stem cells (TDSCs), to collagen. CBD-extracellular vesicles (CBD-EVs) were coupled to decellularized bovine tendon sheets (DBTS) to fabricate a bio-functionalized scaffold (CBD-EVs-DBTS). Our results show that thus obtained bio-functionalized scaffolds facilitate the proliferation, migration and tenogenic differentiation of stem cells in vitro. Furthermore, the scaffolds promote endogenous stem cell recruitment to the defects, facilitate collagen deposition and improve the biomechanics of injured tendons, thus resulting in functional regeneration of tendons.

Bioactive Decellularized Tendon-Derived Stem Cell Sheet for Promoting Graft Healing After Anterior Cruciate Ligament Reconstruction

BACKGROUND

Stem cell sheets provide a scaffold-free option for the promotion of graft healing after anterior cruciate ligament reconstruction (ACLR). However, cell viability, stability, and potential uncontrolled actions create challenges for clinical translation. The decellularization of cell sheets may overcome these problems as studies have shown that the natural extracellular matrix of stem cells is bioactive and can promote tissue repair.

HYPOTHESIS

The decellularized tendon-derived stem cell (dTDSC) sheet can promote graft healing after ACLR.

STUDY DESIGN

Controlled laboratory study.

METHODS

An optimized decellularization protocol was developed to decellularize the TDSC sheets. A total of 64 Sprague-Dawley rats underwent ACLR with or without the dTDSC sheet wrapping the tendon graft (n = 32/group). At 2 and 6 weeks after surgery, graft healing was assessed by micro-computed tomography, histology, and biomechanical testing. The accumulation of iNOS⁺ and CD206⁺ cells and the expression of metalloproteinase 1 (MMP-1), MMP-13, and tissue inhibitor of metalloprotease 1 (TIMP-1) were assessed by immunohistochemistry.

RESULTS

The decellularization was successful, with the removal of 98.4% nucleic acid while preserving the collagenous proteins and bioactive factors. The expression of bone morphogenetic protein 2 (BMP-2) and VEGF in the dTDSC sheet was comparable with the TDSC sheet (P > .05). Micro-computed tomography showed significantly more tunnel bone formation in the dTDSC sheet group. The dTDSC sheet group demonstrated better graft osteointegration and higher integrity of graft midsubstance with significantly higher ultimate failure load (16.58 ± 7.24 vs 8.93 ± 2.45 N; P = .002) and stiffness (11.97 ± 5.21 vs 6.73 ± 2.20 N/mm; P = .027). Significantly fewer iNOS⁺ cells but more CD206⁺ cells, as well as lower MMP-1 and MMP-13 but higher TIMP-1 expression, were detected at the tendon-bone interface and graft midsubstance in the dTDSC sheet group.

CONCLUSION

An optimized decellularization protocol for producing bioactive dTDSC sheets was developed. Wrapping tendon graft with a dTDSC sheet promoted graft healing after ACLR, likely via enhancing bone formation and angiogenesis by BMP-2 and VEGF, modulating macrophage polarization and MMP/TIMP expression, and physically protecting the tendon graft.

CLINICAL RELEVANCE

dTDSC sheets alleviate the quality control and safety concerns of cell transplantation and can be used as a cell-free alternative for the promotion of graft healing in ACLR.

Constructing a highly bioactive tendon-regenerative scaffold by surface modification of tissue-specific stem cell derived extracellular matrix

Developing highly bioactive scaffold materials to promote stem cell migration, proliferation and tissue-specific differentiation is a crucial requirement in current tissue engineering and regenerative medicine. Our previous work has demonstrated that the decellularized tendon slices (DTSs) are able to promote stem cell proliferation and tenogenic differentiation in vitro and show certain pro-regenerative capacity for rotator cuff tendon regeneration in vivo. In this study, we present a strategy to further improve the bioactivity of the DTSs for constructing a novel highly bioactive tendon-regenerative scaffold by surface modification of tendon-specific stem cell-derived extracellular matrix (tECM), which is expected to greatly enhance the capacity of scaffold material in regulating stem cell behavior, including migration, proliferation and tenogenic differentiation. We prove that the modification of tECM could change the highly aligned surface topographical cues of the DTSs, retain the surface stiffness of the DTSs and significantly increase the content of multiple ECM components in the tECM-DTSs. As a result, the tECM-DTSs dramatically enhance the migration, proliferation as well as tenogenic differentiation of rat bone marrow-derived stem cells compared with the DTSs. Collectively, this strategy would provide a new way for constructing ECM-based biomaterials with enhanced bioactivity for in situ tendon regeneration applications.

Matrisome provides a supportive microenvironment for oral squamous cell carcinoma progression

Oral squamous cell carcinoma (OSCC) is a common pernicious tumor in the head and neck regions. However, the function of tumor extracellular matrix (ECM) has not been elucidated. A tissue engineering method was applied for remodeling ECM through decellularization. The cellular components were removed, and the biological composition was mostly preserved. Proteomics was performed to analyze the characterization between normal and tumor ECM. According to LC-MS/MS results, 26 proteins just showed in tumor ECM, and 14 proteins only showed in late-stage tumor ECM. KEGG pathway analysis showed that most variant proteins were linked to metabolic regulation and tumor immunity (such as SCC-Ag1, LOX). To affirm the influence of tumor ECM on the progression of OSCC, tumor cells and macrophages were co-cultured with ECM scaffold. Marked differences in proliferation, apoptosis, and migration of OSCC cells were observed between tumor and normal ECM. Tumor ECM polarized macrophages towards an anti-inflammatory phenotype (higher IL-10 and CD68, and relatively lower CD86 and IL1-β). Collectively, these findings suggest that tumor ECM served as a permissive role in OSCC progression. SIGNIFICANCE: The variation between OSCC ECM and normal ECM confirm tumor ECM plays a significant role in OSCC deterioration, which is conducive to exploring the occurrence and progression mechanisms of OSCC, and further improving the curative effect of this disease.

Enhancement of Migration and Tenogenic Differentiation of Macaca Mulatta Tendon-Derived Stem Cells by Decellularized Tendon Hydrogel

Decellularized tendon hydrogel from human or porcine tendon has been manufactured and found to be capable of augmenting tendon repair in vivo. However, no studies have clarified the effect of decellularized tendon hydrogel upon stem cell behavior. In the present study, we developed a new decellularized tendon hydrogel (T-gel) from Macaca mulatta, and investigated the effect of T-gel on the proliferation, migration and tenogenic differentiation of Macaca mulatta tendon-derived stem cells (mTDSCs). The mTDSCs were first identified to have universal stem cell characteristics, including clonogenicity, expression of mesenchymal stem cell and embryonic stem cell markers, and multilineage differentiation potential. Decellularization of Macaca mulatta Achilles tendons was confirmed to be effective by histological staining and DNA quantification. The resultant T-gel exhibited highly porous structure or similar nanofibrous structure and approximately swelling ratio compared to the collagen gel (C-gel). Interestingly, stromal cell-derived factor-1 (SDF-1) and fibromodulin (Fmod) inherent in the native tendon extracellular matrix (ECM) microenvironment were retained and the values of SDF-1 and Fmod in the T-gel were significantly higher than those found in the C-gel. Compared with the C-gel, the T-gel was found to be cytocompatible with NIH-3T3 fibroblasts and displayed good histocompatibility when implanted into rat subcutaneous tissue. More importantly, it was demonstrated that the T-gel supported the proliferation of mTDSCs and significantly promoted the migration and tenogenic differentiation of mTDSCs compared to the C-gel. These findings indicated that the T-gel, with its retained nanofibrous structure and some bioactive factors of native tendon ECM microenvironment, represents a promising hydrogel for tendon regeneration.

Hierarchically Demineralized Cortical Bone Combined With Stem Cell-Derived Extracellular Matrix for Regeneration of the Tendon-Bone Interface

BACKGROUND

Poor healing of the tendon-bone interface after rotator cuff repair is one of the main causes of surgical failure. Previous studies demonstrated that demineralized cortical bone (DCB) could improve healing of the enthesis.

PURPOSE

To evaluate the outcomes of hierarchically demineralized cortical bone (hDCB) coated with stem cell-derived extracellular matrix (hDCB-ECM) in the repair of the rotator cuff in a rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Tendon-derived stem cells (TDSCs) were isolated, cultured, and identified. Then, hDCB was prepared by the graded demineralization procedure. Finally, hDCB-ECM was fabricated via 2-week cell culture and decellularization, and the morphologic features and biochemical compositions of the hDCB-ECM were evaluated. A total of 24 rabbits (48 samples) were randomly divided into 4 groups: control, DCB, hDCB, and hDCB-ECM. All rabbits underwent bilateral detachment of the infraspinatus tendon, and the tendon-bone interface was repaired with or without scaffolds. After surgery, 8 rabbits were assessed by immunofluorescence staining at 2 weeks, and the others were assessed by micro-computed tomography (CT) examination, immunohistochemical staining, histological staining, and biomechanical testing at 12 weeks.

RESULTS

TDSCs were identified to have universal stem cell characteristics including cell markers, clonogenicity, and multilineage differentiation. The hDCB-ECM contained 3 components (bone, partial DCB, and DCB coated with ECM) with a gradient of calcium and phosphorus elements, and the ECM had stromal cell-derived factor 1, biglycan, and fibromodulin. Macroscopic observations demonstrated the absence of infection and rupture around the enthesis. The results of immunofluorescence staining showed that hDCB-ECM promoted stromal cell recruitment. Results of micro-CT analysis, immunohistochemical staining, and histological staining showed that hDCB-ECM enhanced bone and fibrocartilage formation at the tendon-bone interface. Biomechanical analysis showed that the hDCB-ECM group had higher ultimate tensile stress and Young modulus than the DCB group.

CONCLUSION

The administration of hDCB-ECM promoted healing of the tendon-bone interface.

CLINICAL RELEVANCE

hDCB-ECM could provide useful information for the design of scaffolds to repair the tendon-bone interface, and further studies are needed to determine its effectiveness.

Biologics in the Treatment of Achilles Tendon

The treatment of Achilles tendinitis from conservative to minimally invasive to surgery gives patients a wide range of treatment options for this common pathology. The use and role of biologics to augment this treatment is emerging. The use of biologics may enhance the healing potential of the Achilles tendon when conservative treatment fails. There are a handful of biologics being investigated to obtain if improved outcomes can be maximized.

Effect of Freshly Isolated Bone Marrow Mononuclear Cells and Cultured Bone Marrow Stromal Cells in Graft Cell Repopulation and Tendon-Bone Healing after Allograft Anterior Cruciate Ligament Reconstruction

Graft cell repopulation and tendon-bone tunnel healing are important after allograft anterior cruciate ligament reconstruction (ACLR). Freshly isolated bone marrow mononuclear cells (BMMNCs) have the advantage of short isolation time during surgery and may enhance tissue regeneration. Thus, we hypothesized that the effect of intra-articular BMMNCs in post-allograft ACLR treatment is comparable to that of cultured bone marrow stromal cells (BMSCs). A rabbit model of hamstring allograft ACLR was used in this study. Animals were randomly assigned to the BMMNC, BMSC, and control groups. Fresh BMMNCs isolated from the iliac crest during surgery and cultured BMSCs at passage four were used in this study. A total of 1 × 10⁷ BMMNCs or BMSCs in 100 µL phosphate-buffered saline were injected into the knee joint immediately after ACLR. The control group was not injected with cells. At two and six weeks post operation, we assessed graft cell repopulation with histological and cell tracking staining (PKH26), and tendon-bone healing with histological micro-computed tomography and immunohistochemical analyses for collagen I and monocyte chemoattractant protein-1 (MCP1). At two weeks post operation, there was no significant difference in the total cell population within the allograft among the three groups. However, the control group showed significantly higher cell population within the allograft than that of BM cell groups at six weeks. Histological examination of proximal tibia revealed that the intra-articular delivered cells infiltrated into the tendon-bone interface. Compared to the control group, the BM cell groups showed broader gaps with interfacial fibrocartilage healing, similar collagen I level, and higher MCP1 expression in the early stage. Micro-CT did not reveal any significant difference among the three groups. BMMNCs and BMSCs had comparable effects on cell repopulation and interfacial allograft-bone healing. Intra-articular BM cells delivery had limited benefits on graft cell repopulation and caused higher inflammation than that in the control group in the early stage, with fibrocartilage formation in the tendon-bone interface after allograft ACLR.

Biomimetic strategies for tendon/ligament-to-bone interface regeneration

Tendon/ligament-to-bone healing poses a formidable clinical challenge due to the complex structure, composition, cell population and mechanics of the interface. With rapid advances in tissue engineering, a variety of strategies including advanced biomaterials, bioactive growth factors and multiple stem cell lineages have been developed to facilitate the healing of this tissue interface. Given the important role of structure-function relationship, the review begins with a brief description of enthesis structure and composition. Next, the biomimetic biomaterials including decellularized extracellular matrix scaffolds and synthetic-/natural-origin scaffolds are critically examined. Then, the key roles of the combination, concentration and location of various growth factors in biomimetic application are emphasized. After that, the various stem cell sources and culture systems are described. At last, we discuss unmet needs and existing challenges in the ideal strategies for tendon/ligament-to-bone regeneration and highlight emerging strategies in the field.

The Role of Collagen-Based Biomaterials in Chronic Wound Healing and Sports Medicine Applications

Advancements in tissue engineering have taken aim at treating tissue types that have difficulty healing naturally. In order to achieve improved healing conditions, the balance of exogenous matrix, cells, and different factors must be carefully controlled. This review seeks to explore the aspects of tissue engineering in specific tissue types treated in sports medicine and advanced wound management from the perspective of the matrix component. While the predominant material to be discussed is collagen I, it would be remiss not to mention its relation to the other contributing factors to tissue engineered healing. The main categories of materials summarized here are (1) reconstituted collagen scaffolds, (2) decellularized matrix tissue, and (3) non-decellularized tissue. These three groups are ordered by their increase in additional components beyond simply collagen.

Biologic therapies for foot and ankle injuries

Introduction: The use of orthobiologics as supplemental treatment for foot and ankle pathologies have increased in the past decades. They have been used to improve the healing of bone and soft tissue injuries. There have been several studies that examined the use of biologics for knee and hip pathologies but the foot and ankle construct has unique features that must be considered.Areas covered: The biologics for foot and ankle injuries that are covered in this review are platelet-rich plasma (PRP), stem cells, growth factors, hyaluronic acid, bone grafts, bone substitutes, and scaffolds. These modalities are used in the treatment of pathologies related to tendon and soft tissue as well as cartilage.Expert opinion: The utilization of biological adjuncts for improved repair and regeneration of ankle injuries represents a promising future in our efforts to address difficult clinical problems. The application of concentrated bone marrow and PRP each represents the most widely studied and commonly used injection therapies with early clinical studies demonstrating promising results, research is also being done using other potential therapies such as stem cells and growth factors; further investigation and outcome data are still needed.

Influence of the integrity of tendinous membrane and fascicle on biomechanical characteristics of tendon-derived scaffolds

The biomechanical characteristics of tendon grafts is essential for tendon reconstructive surgery due to its great role in providing a good mechanical environment for tendon healing and regeneration. In our previous studies, the decellularized tendon slices (DTSs) and decellularized bovine tendon sheets (DBTSs) scaffolds were successfully developed. However, the influence of the integrity of tendinous membrane (endotenon and epitenon) and fascicle on biomechanical characteristics of these two scaffolds was not investigated. In this study, we assessed the integrity of tendinous membrane and fascicle of the tendon derived scaffolds and its effect on the biomechanical characteristics. The results of histological staining indicated that the DBTSs had complete endotenon and epitenon, while DTSs had no epitenon at all, only part of endotenon was remained. Furthermore, the DBTSs, and DTSs with thickness of 900 μm had complete fascicles, while DTSs with thickness less than 600 μm had almost no complete fascicles. The fibrous configuration of epitenon was well-preserved in the surface of the DBTSs but the surface ultrastructure of the DTSs was aligned collagen fibers based on scanning electron microscopy examination. The results of transmission electron microscopy showed that there was no significant difference between the DBTSs and DTSs. Mechanically, the DBTSs and DTSs with thickness of 900 μm showed similar ultimate tensile strength and stiffness to native tendon segments (NTSs). The strain at break and suture retention strength of the DBTSs showed much higher than that of the DTSs (p < 0.05). Additionally, the DBTSs showed higher ultimate load than the DTSs when these scaffolds were sutured with NTSs (p < 0.05) through the modified Kessler technique based on a uniaxial tensile test. This study demonstrated that DTSs may be used as a patch for reinforcing tendon repair, while DBTSs may be used as a bridge for reconstructing tendon defects.

Designing a novel vacuum aspiration system to decellularize large-size enthesis with preservation of physicochemical and biological properties

Background

Functional and rapid enthesis regeneration remains a challenge after arthroscopic rotator cuff (RC) repair. Tissue-engineering a large-size biomimetic scaffold may be an adjuvant strategy to improve this clinical dilemma. Herein, we developed an optimized protocol to decellularize large-size enthesis as scaffolds for augmenting RC tear.

Methods

A novel vacuum aspiration system (VAS) was set up, which can provide a negative pressure to suck out cellular substances from tissue blocks without using chemical detergents. Large-size enthesis tissue specimens were harvested from canine infraspinatus tendon (IT) insertion, and then decellularized with an optimized protocol [freeze-thaw processing followed by nuclease digestion and phosphate buffer saline (PBS) rinsing in the custom-designed VAS], or a conventional protocol (freeze-thaw processing followed by nuclease digestion and PBS rinsing), thus fabricating two kinds of acellular enthesis matrix (AEM), namely C-AEM and O-AEM. After that, the C-AEM and O-AEM were comparatively evaluated from the aspect of their physicochemical and biological properties.

Results

Physiochemically, the O-AEM preserved the morphologies, ingredients, and tensile properties much better than the C-AEM. Biologically, in vitro studies demonstrated that both C-AEM and O-AEM show no cytotoxicity and low immunogenicity, which could promote stem cells attachment and proliferation. Interestingly, O-AEM showed better region-specific inducibility on the interacted stem cell down osteogenic, chondrogenic and tenogenic lineages compared with C-AEM. Additionally, using a canine IT repair model, the injured enthesis patched with O-AEM showed a significant improvement compared with the injured enthesis patched with C-AEM or direct suture histologically.

Conclusions

The proposed VAS may help us fabricate large-size AEM with good physicochemical and biological properties, and this AEM may have potential clinical applications in patching large/massive RC tear.

Tissue-Engineered Decellularized Allografts for Anterior Cruciate Ligament Reconstruction

Anterior cruciate ligament (ACL) reconstruction with allografts is limited by high immunogenicity, poor cellularization, and delayed tendon-bone healing. Decellularized tendons (DAs) have been used as bioscaffolds to reconstruct ligaments with variable success. In the study, four kinds of decellularized allogeneic hamstring tendons were prepared and their microstructure and cytocompatibility were examined in vitro. The results showed that decellularized allografts neutralized by 5% calcium bicarbonate had typical reticular and porous microstructures with optical cytocompatibility. Tissue-engineering decellularized allografts (TEDAs) were prepared with the selected decellularized allografts and tendon stem/progenitor cells and used for ACL reconstruction in a rabbit model. Histological staining showed that the TEDAs promoted cellular infiltration and new vessel formation significantly and improved tendon-bone healing moderately compared to decellularized allografts. Better macroscopic scores and biomechanical results were observed in TEDA groups, but there were no significant differences between DA and TEDA groups at months 1, 2, and 3 postoperatively. Immunohistochemical data showed that the tissue-engineering decellularized allografts enhanced the expression of collagen I at each timepoint and collagen III at months 1 and 2. ELISA analysis showed that the tissue-engineering decellularized allografts reduced the secretion of IgE and IL-1β within 1 month and promoted the secretion of IL-2, IL-4, IL-10, and IL-17 after 1 month. The results showed that tissue-engineering decellularized allografts strengthened intra-articular graft remodeling significantly and provided moderate improvements in tendon-bone healing by creating more suitable immune responses than decellularized allografts. The study revealed that tissue-engineering decellularized allografts as a promising option for ACL reconstruction could achieve more favorable outcomes.

Efficient decellularization of equine tendon with preserved biomechanical properties and cytocompatibility for human tendon surgery indications

Chronic and acute tendon injuries are frequent afflictions, for which treatment is often long and unsatisfactory. When facing extended injuries, matrices and scaffolds with sufficient biomechanical properties are required for surgical repair and could additionally serve as supports for cellular therapies to improve healing. In this study, protocols of either commonly used detergents only (SDS 1%, Triton 1%, TBP 1%, and Tween‐20 1%) or a combination of freeze/thaw (F/T) cycles with decellularization agents (NaCl 1M, ddH₂O) were evaluated for the decellularization of horse equine superficial digital flexor tendon (SDFT) for hand flexor or extensor tendon reconstruction. Decellularization efficiency was assessed microscopically by histological staining (HE, DAPI) and DNA quantification. Macroscopical structure and biomechanical integrity of the tendon matrices were further assessed by gross observation, histological staining (SR), and mechanical testing (ultimate strain and stress, Young’s modulus, energy to failure) for select protocols. Decellularization with hypertonic NaCl 1M in association with F/T cycles produced the most robust tendon matrices, which were nontoxic after 10 days for subsequent recellularization with human fetal progenitor tendon cells (hFPTs). This standardized protocol uses a less aggressive decellularization agent than current practice, which allows subsequent reseeding with allogenic cells, therefore making them very suitable and bioengineered tendon matrices for human tendon reconstruction in the clinic.

Lateral slit delivery of bone marrow stromal cells enhances regeneration in the decellularized allograft flexor tendon

BACKGROUND/OBJECTIVE

Stem cell-based therapy has been applied to accelerate the revitalization of allograft tendon into a viable and functional tendon. Although many authors have proposed different methods to help the seeded stem cell distribution in the decellularized allograft, limited success has been achieved as tendon is a high dense connective tissue. We hypothesized that bone marrow stromal cells (BMSCs), seeded through the lateral slit, can regenerate the decellularized tendon (DCT) graft. The cell proliferation, cell viability, and tendon-specific gene expression are increased with the seeded cell density.

METHODS

Eighty-seven flexor digitorum profundus tendons were equally and randomly divided into 6 treatment groups that were seeded with low-density (2 × 107 cells/mL) and high-density (5 × 107 cells/mL) BMSCs through lateral slits cultured for 2 and 4 weeks, DCT without cells, and fresh live tendons. Tendons were evaluated for cell distribution, cell proliferation, cell viability, gene expression of Collagen I and Collagen III, tenogenic markers, and MMPs.

RESULTS

Histologic evaluation revealed BMSCs distributed from the lateral slit to the whole DCT. BMSCs were proliferated and kept viable in lateral slit decellularized tendon (LSDCT) in both seeded cell density groups after 2 and 4 weeks of culture. However, no significant differences in the cell proliferation between both cell density groups at 2 and 4 weeks of culture were observed. The lowest cell viability was found in the high-density group after 4 weeks of culture. BMSCs in LSDCT showed a significant tendency of higher gene expression of Collagen I, Collagen III, tenascin C, MMP2, MMP9, and MMP13 compared to normal tendons in both cell density groups at 2 and 4 weeks of culture.

CONCLUSION

BMSCs proliferated and remained viable after 2 and 4 weeks of culture with distribution throughout the lateral slits. Lateral slit preparation allows for the effective delivery and maintenance of mesenchymal cells with proliferation and generating a tenogenic behaviour of DCT in both the low and high cell densities in an in vitro model.

THE TRANSLATION POTENTIAL OF THIS ARTICLE

Revitalizing the implanted decellularized allograft is important for clinical application. In this study, we demonstrated that the DCT, with lateral slits, could harbour the seeded stem cell and stimulate proliferation with collagen synthesis. This evidence was presented for clinical application of the lateral slit technique, in DCT grafts, which would repopulate the seeded BMSCs during tendon and ligament reconstruction.

[Research progress of structured repair of tendon-bone interface]

In sports system, the tendon-bone interface has the effect of tensile and bearing load, so the effect of healing plays a crucial role in restoring joint function. The process of repair is the formation of scar tissue, so it is difficult to achieve the ideal effect for morphology and biomechanical strength. The tissue engineering method can promote the tendon-bone interface healing from the seed cells, growth factors, and scaffolds, and is a new direction in the field of development of the tendon-bone interface healing.

Enhancement of tenogenic differentiation of rat tendon-derived stem cells by biglycan

Biglycan (BGN) has been identified as one of the critical components of the tendon-derived stem cells (TDSCs) niche and may be related to tendon formation. However, so far, no study has demonstrated whether the soluble BGN could induce the tenogenic differentiation of TDSCs in vitro. The aim of this study was to investigate the effect of BGN on the tenogenic differentiation of TDSCs. The proliferation and tenogenic differentiation of TDSCs exposed to different concentrations of BGN (0, 50, 100, and 500 ng/ml) were determined by the live/dead cell staining assay, CCK-8 assay, quantitative real-time polymerase chain reaction (qRT-PCR), and western blot analysis. The BGN signaling pathway of TDSCs (with and without 50 ng/ml of BGN) was determined by western blot analysis and qRT-PCR analysis. At a concentration of 50 ng/ml, BGN increased the expression of the tenogenic markers THBS-4 and TNMD at both the messenger RNA (mRNA) and protein levels. Meanwhile, 50 ng/ml of BGN inhibited the expression of the chondrogenic and osteogenic markers SOX9, ACN, and RUNX2 at both the mRNA and protein levels. Moreover, BGN (50 ng/ml) affected the expression of the components of the extracellular matrix of TDSCs. Additionally, BGN activated the Smad1/5/8 pathway as indicated by an increase in phosphorylation and demonstrated by inhibition experiments. Upregulation in the gene expression of BMP-associated receptors (BMPRII, ActR-IIa, and BMPR-Ib) and Smad pathway components (Smad4 and 8) was observed. Taken together, BGN regulates tenogenic differentiation of TDSCs via BMP7/Smad1/5/8 pathway and this regulation may provide a basic insight into treating tendon injury.

Biologics in the Treatment of Achilles Tendon Pathologies

Regenerative medicine is gaining more and more space for the treatment of Achilles pathologic conditions. Biologics could play a role in the management of midportion Achilles tendinopathy as a step between conservative and surgical treatment or as an augmentation. Higher-level studies are needed before determining a level of treatment recommendation for biologic strategies for insertional Achilles tendinopathy. Combining imaging with patient's functional requests could be the way to reach a protocol for the use of biologics for the treatment of midportion Achilles tendinopathy and, for this perspective, the authors describe the Foot and Ankle Reconstruction Group algorithm of treatment.

An overview of decellularisation techniques of native tissues and tissue engineered products for bone, ligament and tendon regeneration

Decellularised tissues and organs have been successfully used in a variety of tissue engineering/regenerative medicine applications. Because of the complexity of each tissue (size, porosity, extracellular matrix (ECM) composition etc.), there is no standardised protocol and the decellularisation methods vary widely, thus leading to heterogeneous outcomes. Physical, chemical, and enzymatic methods have been developed and optimised for each specific application and this review describes the most common strategies utilised to achieve decellularisation of soft and hard tissues. While removal of the DNA is the primary goal of decellularisation, it is generally achieved at the expense of ECM preservation due to the harsh chemical or enzymatic processing conditions. As denaturation of the native ECM has been associated with undesired host responses, decellularisation conditions aimed at effectively achieving simultaneous DNA removal and minimal ECM damage will be highlighted. Additionally, the utilisation of decellularised matrices in regenerative medicine is explored, as are the most recent strategies implemented to circumvent challenges in this field. In summary, this review focusses on the latest advancements and future perspectives in the utilisation of natural ECM for the decoration of synthetic porous scaffolds.

Evaluation of an elastic decellularized tendon-derived scaffold for the vascular tissue engineering application

Due to the limited success rate of currently available vascular replacements, tissue engineering has received tremendous attention in recent years. A main challenge in the field of regenerative medicine is creating a mechanically functional tissue with a well-organized extracellular matrix, particularly of collagen and elastin. In this study, the native collagen scaffold derived from decellularized tendon sections, as a scaffold having the potential to be used for vascular tissue engineering applications, was studied. We showed that the elasticity of the scaffolds was improved when crosslinked with the bovine elastin. The effect of different concentrations of elastin on mechanical properties of the collagen scaffolds was evaluated of which 15% elastin concentration was selected for further analysis based on the results. Addition of 15% elastin to collagen scaffolds significantly decreased Young's modulus and the tensile stress at the maximum load and increased the tensile strain at the maximum load of the constructs as compared to those of the collagen scaffolds or control samples. Moreover, tubular elastin modified collagen scaffolds showed significantly higher burst pressure compared to the control samples. Smooth muscle cells and endothelial cells cultured on the elastin modified collagen scaffolds showed high viability (>80%) after 1, 3, and 7 days. Furthermore, the cells showed a high tendency to align with the collagen fibers within the scaffold and produced their own extracellular matrix over time. In conclusion, the results show that the decellularized tendon sections have a great potential to be used as scaffolds for vascular tissue engineering applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1225-1234, 2019.

Engineered tendon-fibrocartilage-bone composite and bone marrow-derived mesenchymal stem cell sheet augmentation promotes rotator cuff healing in a non-weight-bearing canine model

Reducing rotator cuff failure after repair remains a challenge due to suboptimal tendon-to-bone healing. In this study we report a novel biomaterial with engineered tendon-fibrocartilage-bone composite (TFBC) and bone marrow-derived mesenchymal stem cell sheet (BMSCS); this construct was tested for augmentation of rotator cuff repair using a canine non-weight-bearing (NWB) model. A total of 42 mixed-breed dogs were randomly allocated to 3 groups (n = 14 each). Unilateral infraspinatus tendon underwent suture repair only (control); augmentation with engineered TFBC alone (TFBC), or augmentation with engineered TFBC and BMSCS (TFBC + BMSCS). Histomorphometric analysis and biomechanical testing were performed at 6 weeks after surgery. The TFBC + BMSCS augmented repairs demonstrated superior histological scores, greater new fibrocartilage formation and collagen fiber organization at the tendon-bone interface compared with the controls. The ultimate failure load and ultimate stress were 286.80 ± 45.02 N and 4.50 ± 1.11 MPa for TFBC + BMSCS group, 163.20 ± 61.21 N and 2.60 ± 0.97 MPa for control group (TFBC + BMSCS vs control, P = 1.12E-04 and 0.003, respectively), 206.10 ± 60.99 N and 3.20 ± 1.31 MPa for TFBC group (TFBC + BMSCS vs TFBC, P = 0.009 and 0.045, respectively). In conclusion, application of an engineered TFBC and BMSCS can enhance rotator cuff healing in terms of anatomic structure, collagen organization and biomechanical strength in a canine NWB model. Combined TFBC and BMSCS augmentation is a promising strategy for rotator cuff tears and has a high potential impact on clinical practice.

Bridging Repair of Large Rotator Cuff Tears Using a Multilayer Decellularized Tendon Slices Graft in a Rabbit Model

PURPOSE

The purpose of this study was to evaluate the efficacy of an extracellular matrix scaffold with multilayer decellularized tendon slices (MDTSs) for reconstructing large rotator cuff tears in a rabbit model.

METHODS

Large defects in the infraspinatus tendons were created bilaterally in 36 rabbits. The graft group underwent bridging repair of the defects with the MDTSs grafts from Achilles tendons of adult beagle dogs, and the control group underwent repair with the autologous excised tendon. Specimens underwent histologic observation, biomechanical testing, and microcomputed tomography analysis at 2, 4, and 8 weeks after surgery.

RESULTS

Histologic analysis confirmed that the MDTSs graft promoted cell ingrowth and tissue integration, and fibrocartilage and Sharpey fibers formed at the enthesis at 8 weeks. Accordingly, the MDTSs graft generated a histologic appearance similar to that of the autogenous tendon graft. Mechanical testing revealed a significant increase of the regenerated tendons in ultimate load and stiffness from 4 to 8 weeks postoperatively, which was similar to autologous tendon repair. Microcomputed tomography analysis demonstrated that the MDTSs graft promoted bone formation at the tendon-bone insertion, thus improving the mechanical properties of the repair tendon.

CONCLUSIONS

The MDTSs graft used to bridge large rotator cuff defects in a rabbit model promoted host cell ingrowth, enhanced the remodeling of regenerated tendon, and promoted fibrocartilage formation, thus improving the biomechanical properties of the repaired tendon. This study thereby provides fundamental information for rotator cuff regeneration with the MDTSs graft.

CLINICAL RELEVANCE

Rotator cuff regeneration using MDTSs grafts is a promising procedure for large rotator cuff tears.

Evaluation of Decellularized Bovine Tendon Sheets for Achilles Tendon Defect Reconstruction in a Rabbit Model

BACKGROUND

Achilles tendon (AT) defects frequently occur in trauma and chronic injuries. Currently, no method can satisfactorily reconstruct the AT with completely restored function.

PURPOSE

To evaluate the postoperative outcomes of AT defect reconstruction with decellularized bovine tendon sheets (DBTSs) in a rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

DBTSs were prepared from bovine tendons after compression, decellularization, antigen extraction, freeze drying, and sterilization. Platelet-rich plasma (PRP) was obtained by differential centrifugation. Sixty-three rabbits were used in this study, and the AT defect model was created bilaterally. All rabbits were divided into 3 groups (n = 21). In the DBTS group and the DBTS + PRP group, 2-cm-long AT was excised and reconstructed by DBTSs or PRP-treated DBTSs. In the control group, the rabbits underwent AT transection, and stumps were sutured. After surgery, all rabbits were assessed by ultrasonography and magnetic resonance imaging and then sacrificed for histological examination and biomechanical testing at 4, 8, or 12 weeks.

RESULTS

Gross observations demonstrated the absence of immunologic incompatibility and rejection. Histological examination showed that DBTSs promoted host cell infiltration and new fibrous tissue integration as compared with the control group. In each group, there was an AT-like structure formation and aligned collagen fiber deposition at 12 weeks. Mechanical properties of the reconstructed AT were not significantly different among the 3 groups at 4, 8, and 12 weeks after surgery ( P > .05). Ultrasonography and magnetic resonance imaging results illustrated that the reconstructed AT from each group maintained remodeling, and there was no significant difference in the echogenicity scoring ( P > .05) and percentages of good and excellent ( P > .05) among the 3 groups.

CONCLUSION

DBTSs, which retain the native tendon structure and bioactive factors, had the ability to remodel and integrate into the rabbit AT and improve the healing process.

CLINICAL RELEVANCE

DBTSs could serve as an effective bioscaffold to reconstruct AT defects.

Tenogenesis of Decellularized Porcine Achilles Tendon Matrix Reseeded with Human Tenocytes in the Nude Mice Xenograft Model

Cultivation of autologous human tenocytes in a cell-free xenogenic extracellular tendon matrix (xECM) could present an approach for tendon reconstruction. The aim of this study was to achieve tendon-like tissue formation by implanting decellularized porcine Achilles tendons recellularized with human hamstring tendon-derived tenocytes into nude mice. The structure of decellularized xECM was histologically monitored before being dynamically reseeded with human tenocytes. After 6⁻12 weeks in vivo, construct quality was monitored using macroscopical and histological scoring systems, vitality assay and quantitative DNA and glycosaminoglycan (GAG) assays. For comparison to tendon xECM, a synthetic polyglycolic acid (PGA) polymer was implanted in a similar manner. Despite decellularized xECM lost some GAGs and structure, it could be recellularized in vitro with human tenocytes, but the cell distribution remained inhomogeneous, with accumulations at the margins of the constructs. In vivo, the xECM constructs revealed in contrast to the PGA no altered size, no inflammation and encapsulation and a more homogeneous cell distribution. xECM reseeded with tenocytes showed superior histological quality than cell-free implanted constructs and contained surviving human cells. Their DNA content after six and 12 weeks in vivo resembled that of native tendon and xECM recellularized in vitro. Results suggest that reseeded decellularized xECM formed a tendon-like tissue in vivo.

Lactoferrin and parathyroid hormone are not harmful to primary tenocytes in vitro, but PDGF may be

Introduction

Recently, bone-active factors such as parathyroid hormone and lactoferrin, have been used in pre-clinical models to promote tendon healing. How-ever, there is limited understanding of how these boneactive factors may affect the cells of the ten-don themselves. Here, we present an in vitro study assessing the effects of parathyroid hor-mone and lactoferrin on primary tendon cells (tenocytes), and compare their responses to the tenogenic factors, PDGF, IGF-1 and TGF-β.

Materials and Methods

Tenocyte proliferation and collagen production were assessed by alamarBlue® and Sirius red as-says, respectively. To assess tenocyte trans-differentiation, changes in the expression of genes important in tenocyte, chondrocyte and osteoblast biology were determined using real-time PCR.

Results

Parathyroid hormone and lactoferrin had no effect on tenocyte growth or collagen production, with minimal changes in gene expression and no detrimental effects observed to suggest trans-differentiation away from tendon cell behaviour. Tenogenic factors PDGF, IGF-1 and TGF all increasetenocyte collagen production, however, the gene expression data suggests that PDGF promotes severe de-differentiation of the tenocytes.

Discussion

Our findings suggest that using parathyroid hormone or lactoferrin as a singular factor to promote tendon healing may not be of benefit, but for use in tendon-bone healing there would be no detrimental effect on the tendon itself.

Biomimetic tendon extracellular matrix composite gradient scaffold enhances ligament-to-bone junction reconstruction

Management of ligament/tendon-to-bone-junction healing remains a formidable challenge in the field of orthopedic medicine to date, due to deficient vascularity and multi-tissue transitional structure of the junction. Numerous strategies have been employed to improve ligament-bone junction healing, including delivery of stem cells, bioactive factors, and synthetic materials, but these methods are often inadequate at recapitulating the complex structure-function relationships at native tissue interfaces. Here, we developed an easily-fabricated and effective biomimetic composite to promote the regeneration of ligament-bone junction by physically modifying the tendon extracellular matrix (ECM) into a Random-Aligned-Random composite using ultrasound treatment. The differentiation potential of rabbit bone marrow stromal cells on the modified ECM were examined in vitro. The results demonstrated that the modified ECM enhanced expression of chondrogenesis and osteogenesis-associated epigenetic genes (Jmjd1c, Kdm6b), transcription factor genes (Sox9, Runx2) and extracellular matrix genes (Col2a1, Ocn), resulting in higher osteoinductivity than the untreated tendon ECM in vitro. In the rabbit anterior cruciate ligament (ACL) reconstruction model in vivo, micro-computed tomography (Micro-CT) and histological analysis showed that the modified Random-Aligned-Random composite scaffold enhanced bone and fibrocartilage formation at the interface, more efficaciously than the unmodified tendon ECM. Therefore, these results demonstrated that the biomimetic Random-Aligned-Random composite could be a promising scaffold for ligament/tendon-bone junction repair.

STATEMENT OF SIGNIFICANCE

The native transitional region consists of several distinct yet contiguous tissue regions, composed of soft tissue, non-calcified fibrocartilage, calcified fibrocartilage, and bone. A stratified graft whose phases are interconnected with each other is essential for supporting the formation of functionally continuous multi-tissue regions. Various techniques have been attempted to improve adherence of the ligament/tendon graft to bone, including utilization of stem cells, growth factors and biomaterials, but these methods are often inadequate at recapitulating the complex structure-function relationships at native tissue interfaces. Here, we developed an easily-fabricated and effective biomimetic composite to promote the regeneration of ligament-bone junction by physically modifying the tendon extracellular matrix (ECM) into a Random-Aligned-Random composite using ultrasound treatment. The modified ECM enhanced expression of chondrogenesis and osteogenesis-associated epigenetic genes expression in vitro. In the rabbit anterior crucial ligament reconstruction model in vivo, results showed that the modified Random-Aligned-Random composite enhances the bone and fibrocartilage formation in the interface, proving to be more efficient than the unmodified tendon ECM. Therefore, these results demonstrated that the biomimetic Random-Aligned-Random composite could be a promising scaffold for ligament/tendon-bone junction repair.

Fabrication and characterization of a decellularized bovine tendon sheet for tendon reconstruction

Obtaining a performing decellularized tendon scaffold with proper dimensions and adequate availability is highly desirable. However, the combined study of complete decellularization and detailed characterization of native tendon extracellular matrix (ECM) from large animals is still lacking. In the present study, we developed a new decellularization protocol, including physical methods and enzymatic solutions for processing bovine Achilles tendons, and produced a decellularized bovine tendon sheet (DBTS) scaffold for tendon reconstruction. The decellularization effectiveness was demonstrated by DNA quantification and histological qualification. The removal of the alpha-gal epitopes was confirmed by ELISA analysis and immunohistochemical staining. After decellularization, there were no significant alterations of the native tendon extracellular matrix (ECM) properties, including the internal ultrastructure, biochemical compositions such as collagen, glycosaminoglycans (GAGs), basic fibroblast growth factor (bFGF) and transforming growth factor-β1 (TGF-β1), fibronectin and decorin, as well as substantial mechanical strength. Furthermore, the DBTS scaffold showed no cytotoxic and promoted the proliferation of NIH-3T3 fibroblasts in vitro. When implanted into rat subcutaneous tissue, the DBTS scaffold displayed excellent histocompatibility in vivo. Our results, while offering a new decellularization protocol for large tendons, can provide a promising biologic scaffold with a combination of mechanical strength and tendon ECM bioactive factors that may have many potential applications in tendon reconstruction. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2299-2311, 2017.

Automated freeze-thaw cycles for decellularization of tendon tissue - a pilot study

Background

Decellularization of tendon tissue plays a pivotal role in current tissue engineering approaches for in vitro research as well as for translation of graft-based tendon restoration into clinics. Automation of essential decellularization steps like freeze-thawing is crucial for the development of more standardized decellularization protocols and commercial graft production under good manufacturing practice (GMP) conditions in the future.

Methods

In this study, a liquid nitrogen-based controlled rate freezer was utilized for automation of repeated freeze-thawing for decellularization of equine superficial digital flexor tendons. Additional tendon specimens underwent manually performed freeze-thaw cycles based on an established procedure. Tendon decellularization was completed by using non-ionic detergent treatment (Triton X-100). Effectiveness of decellularization was assessed by residual nuclei count and calculation of DNA content. Cytocompatibility was evaluated by culturing allogeneic adipose tissue-derived mesenchymal stromal cells on the tendon scaffolds.

Results

There were no significant differences in decellularization effectiveness between samples decellularized by the automated freeze-thaw procedure and samples that underwent manual freeze-thaw cycles. Further, we inferred no significant differences in the effectiveness of decellularization between two different cooling and heating rates applied in the automated freeze-thaw process. Both the automated protocols and the manually performed protocol resulted in roughly 2% residual nuclei and 13% residual DNA content. Successful cell culture was achieved with samples decellularized by automated freeze-thawing as well as with tendon samples decellularized by manually performed freeze-thaw cycles.

Conclusions

Automated freeze-thaw cycles performed by using a liquid nitrogen-based controlled rate freezer were as effective as previously described manual freeze-thaw procedures for decellularization of equine superficial digital flexor tendons. The automation of this key procedure in decellularization of large tendon samples is an important step towards the processing of large sample quantities under standardized conditions. Furthermore, with a view to the production of commercially available tendon graft-based materials for application in human and veterinary medicine, the automation of key procedural steps is highly required to develop manufacturing processes under GMP conditions.

Tendon-Derived Extracellular Matrix Enhances Transforming Growth Factor-β3-Induced Tenogenic Differentiation of Human Adipose-Derived Stem Cells

Because of the limited and unsatisfactory outcomes of clinical tendon repair, tissue engineering approaches using adult mesenchymal stem cells are being considered a promising alternative strategy to heal tendon injuries. Successful and functional tendon tissue engineering depends on harnessing the biochemical cues presented by the native tendon extracellular matrix (ECM) and the embedded tissue-specific biofactors. In this study, we have prepared and characterized the biological activities of a soluble extract of decellularized tendon ECM (tECM) on adult adipose-derived stem cells (ASCs), on the basis of histological, biochemical, and gene expression analyses. The results showed that tECM enhances the proliferation and transforming growth factor (TGF)-β3-induced tenogenesis of ASCs in both plate and scaffold cultures in vitro, and modulates matrix deposition of ASCs seeded in scaffolds. These findings suggest that combining tendon ECM extract with TGF-β3 treatment is a possible alternative approach to induce tenogenesis for ASCs.

Biocompatibility and degradation of tendon-derived scaffolds

Decellularized extracellular matrix has often been used as a biomaterial for tissue engineering applications. Its function, once implanted can be crucial to determining whether a tissue engineered construct will be successful, both in terms of how the material breaks down, and how the body reacts to the material's presence in the first place. Collagen is one of the primary components of extracellular matrix and has been used for a number of biomedical applications. Scaffolds comprised of highly aligned collagen fibrils can be fabricated directly from decellularized tendon using a slicing, stacking, and rolling technique, to create two- and three-dimensional constructs. Here, the degradation characteristics of the material are evaluated in vitro, showing that chemical crosslinking can reduce degradation while maintaining fiber structure. In vivo, non-crosslinked and crosslinked samples are implanted, and their biological response and degradation evaluated through histological sectioning, trichrome staining, and immunohistochemical staining for macrophages. Non-crosslinked samples are rapidly degraded and lose fiber morphology while crosslinked samples retain both macroscopic structure as well as fiber orientation. The cellular response of both materials is also investigated. The in vivo response demonstrates that the decellularized tendon material is biocompatible, biodegradable and can be crosslinked to maintain surface features for extended periods of time in vivo. This study provides material characteristics for the use of decellularized tendon as biomaterial for tissue engineering.

Decellularized and Engineered Tendons as Biological Substitutes: A Critical Review

Tendon ruptures are a great burden in clinics. Finding a proper graft material as a substitute for tendon repair is one of the main challenges in orthopaedics, for which the requirement of a biological scaffold would be different for each clinical application. Among biological scaffolds, the use of decellularized tendon-derived matrix increasingly represents an interesting approach to treat tendon ruptures. We analyzed in vitro and in vivo studies focused on the development of efficient protocols for the decellularization and for the cell reseeding of the tendon matrix to obtain medical devices for tendon substitution. Our review considered also the proper tendon source and preclinical animal models with the aim of entering into clinical trials. The results highlight a wide panorama in terms of allogenic or xenogeneic tendon sources, specimen dimensions, physical or chemical decellularization techniques, and the cell type variety for reseeding from terminally differentiated to undifferentiated mesenchymal stem cells and their static or dynamic culture employed to generate implantable constructs tested in different animal models. We try to identify the most efficient approach to achieve an optimal biological scaffold for biomechanics and intrinsic properties, resembling the native tendon and being applicable in clinics in the near future, with particular attention to the Achilles tendon substitution.

Engineering Tendon: Scaffolds, Bioreactors, and Models of Regeneration

Tendons bridge muscle and bone, translating forces to the skeleton and increasing the safety and efficiency of locomotion. When tendons fail or degenerate, there are no effective pharmacological interventions. The lack of available options to treat damaged tendons has created a need to better understand and improve the repair process, particularly when suitable autologous donor tissue is unavailable for transplantation. Cells within tendon dynamically react to loading conditions and undergo phenotypic changes in response to mechanobiological stimuli. Tenocytes respond to ultrastructural topography and mechanical deformation via a complex set of behaviors involving force-sensitive membrane receptor activity, changes in cytoskeletal contractility, and transcriptional regulation. Effective ex vivo model systems are needed to emulate the native environment of a tissue and to translate cell-matrix forces with high fidelity. While early bioreactor designs have greatly expanded our knowledge of mechanotransduction, traditional scaffolds do not fully model the topography, composition, and mechanical properties of native tendon. Decellularized tendon is an ideal scaffold for cultivating replacement tissue and modeling tendon regeneration. Decellularized tendon scaffolds (DTS) possess high clinical relevance, faithfully translate forces to the cellular scale, and have bulk material properties that match natural tissue. This review summarizes progress in tendon tissue engineering, with a focus on DTS and bioreactor systems.