Cell-material interactions on biphasic polyurethane matrix

Coating of cobalt chrome substrates with thin films of polar/hydrophobic/ionic polyurethanes: Characterization and interaction with human immunoglobulin G and fibronectin

Biomaterial implants often lead to specific tissue reactions that could compromise their bio-integration and/or optimal cellular interactions. Polyurethanes (PU) are of particular interest as coatings to mask CoCr's bioactivity, since they are generally more biocompatible than metal substrates, present a broad range of chemistry, and have highly tunable-mechanical properties. In the current work, complex polyvinyl-urethanes (referred to as D-PHI materials) are studied for their surface phase structures: specifically, an original D-PHI polymer (O-D-PHI) and a differential formulation with relatively higher hydrophobic and ionic content (HHHI) are of interest. The PUs are diluted in tetrahydrofuran (THF) to generate thin films which differentially influence the physical and chemical properties of the D-PHI coatings. AFM images over time show the gradual appearance of domains exhibiting crystalline organisation, and whose shape and size were dependent on D-PHI thickness (thin films vs non-solvent cast resin materials). After three weeks, a complete stabilization of the crystal state is observed. The thin coatings are stable in an aqueous and 37 °C environment. The adsorption of two human plasmatic proteins Immunoglobulin G (IgG) and Fibronectin (Fn), involved in inflammation and coagulation, was studied. The exposure of specific protein sequences (IgG-Fab, Fn-Cell Binding Domain and Fn-N-terminal domain) were dramatically reduced on both D-PHI materials when compared to bare metal CoCr. The implications of these findings would be relevant to defining coating strategies used to improve the blood clotting and immune cell reactivity to CoCr implant materials.

Shape recovery strain and nanostructures on recovered polyurethane films and their regulation to osteoblasts morphology

Shape memory polyurethanes (SMPUs) have emerged as novel dynamic substrates to regulate cell alignment, in which recovery-induced change in substrates topography has been described as the major contributor. This work, for the first time, confirmed the pivotal roles of recovery strain and phase-separated nanostructures of SMPUs in regulating cell morphology. SMPU films with different stretching ratios (0%, 50%, 100%, and 200%) were found to produce an average recovery strain from 19.41% to 34.04% within 2 h in dulbecco's modified eagle medium (DMEM). Meanwhile, the assembly of hard domains was enhanced during shape recovery, leading to the reorientation of fibrillar apophyses (i.e., nanostructures). Further observation of osteoblast morphology revealed that recovery strain resulted in perpendicular orientation of osteoblasts to strain direction. With the extension of incubation time (24 h), however, the perpendicular orientation was transformed to follow the nanostructures on recovered films, suggesting that the nanostructures might become the determinant of the long-term cell orientation. This study provides a biomechanics-based perspective to understand the dynamic interactions between SMPU and cells, which can help to guide the design of SMPU for specific biomedical applications.

Polyurethane Microgel Based Microtissue: Interface-Guided Assembly and Spreading

Colloidal gels are three-dimensional networks of microgel particles and can be utilized to design microtissues where the differential adhesive interactions between the particles and cells, guided by their surface energetics, are engineered to spatially assemble the cellular and colloidal components into three-dimensional microtissues. In this work we utilized a colloidal interaction approach to design cell-polyurethane (PU) microgel bimodal microtissues using endothelial cells (ECs) as a normal cell model and a nonmalignant breast cancer cell line (MCF-7) as a cancer cell model. PU microgels were developed from a library of segmental polyurethanes with poly(ethylene glycol) soft segment and aliphatic diisocyanate/l-tyrosine based chain extender as hard segment to modulate the interactions between PU colloidal particles and cells. The surface energies of the microgel particles and cells were estimated using Zisman's critical surface tension and van Oss-Good-Chaudhury theory (vOGCT) from liquid contact angle analysis. Binary interaction potentials between colloidal PU particles and cells and the ternary interaction between colloidal PU particle, cell, and collagen I/Matrigel were calculated to explain the formation of microtissues and their spreading in extraneous biomatrix respectively by using classical and extended DLVO theory (XDLVO). Furthermore, rheological analysis and in silico simulations were used to analyze the assembly and spreading of the PU microgel based microtissues. In vitro experiments showed that ECs and MCF-7 displayed more differentiated (EC spreading/MCF-7 lumen formation) character when mixed with microgel particles that were stable in aqueous medium and more undifferentiated character (EC nonspreading/MCF-7 spreading) when mixed with microgel particles unstable in aqueous medium.

Stretching-induced nanostructures on shape memory polyurethane films and their regulation to osteoblasts morphology

Programming such as stretching, compression and bending is indispensible to endow polyurethanes with shape memory effects. Despite extensive investigations on the contributions of programming processes to the shape memory effects of polyurethane, less attention has been paid to the nanostructures of shape memory polyurethanes surface during the programming process. Here we found that stretching could induce the reassembly of hard domains and thereby change the nanostructures on the film surfaces with dependence on the stretching ratios (0%, 50%, 100%, and 200%). In as-cast polyurethane films, hard segments sequentially assembled into nano-scale hard domains, round or fibrillar islands, and fibrillar apophyses. Upon stretching, the islands packed along the stretching axis to form reoriented fibrillar apophyses along the stretching direction. Stretching only changed the chemical patterns on polyurethane films without significantly altering surface roughness, with the primary composition of fibrillar apophyses being hydrophilic hard domains. Further analysis of osteoblasts morphology revealed that the focal adhesion formation and osteoblasts orientation were in accordance with the chemical patterns of the underlying stretched films, which corroborates the vital roles of stretching-induced nanostructures in regulating osteoblasts morphology. These novel findings suggest that programming might hold great potential for patterning polyurethane surfaces so as to direct cellular behavior. In addition, this work lays groundwork for guiding the programming of shape memory polyurethanes to produce appropriate nanostructures for predetermined medical applications.

Hydrophilic polyurethane matrix promotes chondrogenesis of mesenchymal stem cells

Segmental polyurethanes exhibit biphasic morphology and can control cell fate by providing distinct matrix guided signals to increase the chondrogenic potential of mesenchymal stem cells (MSCs). Polyethylene glycol (PEG) based hydrophilic polyurethanes can deliver differential signals to MSCs through their matrix phases where hard segments are cell-interactive domains and PEG based soft segments are minimally interactive with cells. These coordinated communications can modulate cell-matrix interactions to control cell shape and size for chondrogenesis. Biphasic character and hydrophilicity of polyurethanes with gel like architecture provide a synthetic matrix conducive for chondrogenesis of MSCs, as evidenced by deposition of cartilage-associated extracellular matrix. Compared to monophasic hydrogels, presence of cell interactive domains in hydrophilic polyurethanes gels can balance cell-cell and cell-matrix interactions. These results demonstrate the correlation between lineage commitment and the changes in cell shape, cell-matrix interaction, and cell-cell adhesion during chondrogenic differentiation which is regulated by polyurethane phase morphology, and thus, represent hydrophilic polyurethanes as promising synthetic matrices for cartilage regeneration.

From flab to fab: transforming surgical waste into an effective bioactive coating material

Cellular events are regulated by the interaction between integrin receptors in the cell membrane and the extracellular matrix (ECM). Hence, ECM, as a material, can potentially play an instructive role in cell-material interactions. Currently, adipose tissue in the form of lipoaspirate is often discarded. Here, it is demonstrated how our chemical-free decellularization method could be used to obtain ECM from human lipoaspirate waste material. These investigations show that the main biological components are retained in the lipoaspirate-derived ECM (LpECM) material and that this LpECM material could subsequently be used as a coating material to confer bioactivity to an otherwise inert biodegradable material (i.e., polycaprolactone). Overall, lipoaspirate material, a complex blend of endogenous proteins, is effectively used a bioactive coating material. This work is an important stepping-stone towards the development of biohybrid scaffolds that contain cellular benefits without requiring the use of additional biologics based on commonly discarded lipoaspirate material.

Increasing mechanical strength of gelatin hydrogels by divalent metal ion removal

The usage of gelatin hydrogel is limited due to its instability and poor mechanical properties, especially under physiological conditions. Divalent metal ions present in gelatin such as Ca(2+) and Fe(2+) play important roles in the gelatin molecule interactions. The objective of this study was to determine the impact of divalent ion removal on the stability and mechanical properties of gelatin gels with and without chemical crosslinking. The gelatin solution was purified by Chelex resin to replace divalent metal ions with sodium ions. The gel was then chemically crosslinked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC). Results showed that the removal of divalent metal ions significantly impacted the formation of the gelatin network. The purified gelatin hydrogels had less interactions between gelatin molecules and form larger-pore network which enabled EDC to penetrate and crosslink the gel more efficiently. The crosslinked purified gels showed small swelling ratio, higher crosslinking density and dramatically increased storage and loss moduli. The removal of divalent ions is a simple yet effective method that can significantly improve the stability and strength of gelatin hydrogels. The in vitro cell culture demonstrated that the purified gelatin maintained its ability to support cell attachment and spreading.